Uptake of l-[14C]-alanine by glutaraldehyde-treated and untreated spores of Bacillus subtilis

The effect of glutaraldehyde on the uptake of L-alanine, and subsequent germination, in spores of Bacillus subtilis NCTC 8236 was examined. Germination was induced by single amino acids, D-glucose and phosphate buffer at 37 degrees C. L-alanine was the best germinant of all amino acids tested. Pretreatment of spores with low concentrations of acid and alkaline glutaraldehyde inhibited subsequent germination, complete inhibition being observed at concentrations of 0.1% (w/v). This concentration also prevented the loss of heat resistance of spores placed in germination medium and exposed to 75 degrees C. Radioactive studies indicated that maximum uptake of L-alanine occurred after ca 30 min at 37 degrees C. Only 1.2% of available L-alanine was taken up during germination. Pretreatment of spores with glutaraldehyde did not interfere with L-alanine uptake at aldehyde concentrations up to 0.5% (w/v). However, this was significantly reduced at a glutaraldehyde concentration of 1.0% (w/v). Minimal differences were observed between acid and alkaline forms of the aldehyde. The results are discussed in terms of the mode of action of glutaraldehyde.     

Interaction of the Bacillus subtilis spore protoplast, cortex, ion-exchange and coatless forms with glutaraldehyde

G orman , S.P. S cott , E.M. H utchinson , E.P. 1984. Interaction of the Bacillus subtilis spore protoplast, cortex, ion-exchange and coatless forms with glutaraldehyde. Journal of Applied Bacteriology 56 , 95–102.
Bacillus subtilis spores with altered ionic content were tested for their susceptibility to lysis with lysozyme or sodium nitrite following treatment with glutaraldehyde. The Ca-form was more sensitive to glutaraldehyde (pH 4.0.and pH 7.9) than the untreated or H-form. Removal of spore coat dramatically increased sensitivity of the spore to glutaraldehyde. Pretreatment of spores, the coats of which had been extensively removed, with glutaraldehyde (pH 7.9) reduced the rate of lysis by lysozyme and by sodium nitrite, whereas glutaraldehyde at pH 4.0.had little effect. Glutaraldehyde pretreatment (pH 4.0 and pH 7.9) reduced the amount of hexosamine released by lysozyme but not by nitrite from isolated cortical fragments. Spore protoplasts were more susceptible to 0.01% (w/v) glutaraldehyde at pH 4.0 and isolated spore coats adsorbed alkaline glutaraldehyde more rapidly. These results are discussed in terms of a possible mode of action of glutaraldehyde on the bacterial spore.     

Effect of sodium hydroxide and two proteases on the revival of aldehyde-treated spores of Bacillus subtilis

Spores of Bacillus subtilis were subjected to a 24 h exposure (22 C) to vaious commercial and non-commercial aldehyde formulations Subsequent treatment with sodium hydroxide (15 min, 22 C)enabled the recovery of injured spores as determined by enumeration on nutrient agar. Greatest revival was obtained with spores treated with glyoxal, followed by 2% alkaline glutaraldehyde, Sporicidin and 10% Gigasept. Revival was dependentupon neutralization of residual aldehyde with 2% (w/v) glycine prior to alkali treatment. Two percent alkaline glutaradehyde-treated spores were also exposed to to proteases, proteinase K and pronase. No revival was observed. The results are discussed in terms of the mechanism of action of the aldehydes used, with particular emphasis on glutaradehyde.     

Mechanisms of killing of spores of Bacillus subtilis by iodine, glutaraldehyde and nitrous acid

Treatment of wild-type spores of Bacillus subtilis with glutaraldehyde or an iodine-based disinfectant (Betadine) did not cause detectable mutagenesis, and spores (termed alpha-beta-) lacking the major DNA-protective alpha/beta-type, small, acid-soluble proteins (SASP) exhibited similar sensitivity to these agents. A recA mutation did not sensitize wild-type or alpha-beta- spores to Betadine or glutaraldehyde, nor did spore treatment with these agents result in significant expression of a recA-lacZ fusion when the treated spores germinated. Spore glutaraldehyde sensitivity was increased dramatically by removal of much spore coat protein, but this treatment had no effect on Betadine sensitivity. In contrast, nitrous acid treatment of wild-type and alpha-beta- spores caused significant mutagenesis, with alpha-beta- spores being much more sensitive to this agent. A recA mutation further sensitized both wild-type and alpha-beta- spores to nitrous acid, and there was significant expression of a recA-lacZ fusion when nitrous acid-treated spores germinated. These results indicate that: (a) nitrous acid kills B. subtilis spores at least in part by DNA damage, and alpha/beta-type SASP protect against this DNA damage; (b) killing of spores by glutaraldehyde or Betadine is not due to DNA damage; and (c) the spore coat protects spores against killing by glutaraldehyde but not Betadine. Further analysis also demonstrated that spores treated with nitrous acid still germinated normally, while those treated with glutaraldehyde or Betadine did not.     

Inhibition of Bacillus spores by combinations of heat,potassium sorbate,NaCl and pH

Viability of spores of Bacillus cereus was totally inhibited at 85°C over 30 min by adding 0.4% (w/v) potassium sorbate with 6% (w/v) NaCl at pH 4.5. Viability of B. stearothermophilus spores was totally inhibited at 95°C for 45 min in a buffer at pH 4.2 containing 0.8% (w/v) potassium sorbate and 8% (w/v) NaCl. A synergistic inhibitory effect was demonstrated in some of the combinations. The inhibition may be due to interference with the heat-resistance apparatus of the spores.O.B. Oloyede was and J. Scholefield is with the Department of Bioscience & Biotechnology, Food Science Division, University of Strathclyde, Glasgow G1 1SD, UK. O.B. Oloyede is now with the Department of Biochemistry, University of Ilorin, Ilorin, Nigeria.     

Studies on the Mechanism of the Sporicidal Action of Glutaraldehyde

S ummary . Low concentrations (0.025–0.125%) of glutaraldehyde inhibited or prevented colony formation by Escherichia coli, Bacillus subtilis and B. pumilis in agar, and inhibited germination of spores of the Bacillus spp. in L-alanine plus D-glucose. Higher concentrations (2%) of glutaraldehyde at pH 8.5 were sporicidal. Pre-treatment of spores with glutaraldehyde lessened release of dipicolinic acid when the spores were subsequently heated at 100°, but not at 121°. Spores treated with glutaraldehyde and then with 0.5 M thioglycollic acid in 6 M urea at 70° were less sensitive to lysis by hydrogen peroxide than spores which had not been exposed to glutaraldehyde. Glutaraldehyde was less effective in preventing peroxide induced lysis if added to spores which had been previously exposed to thioglycollic acid plus urea at 70°. The mechanism of the sporicidal activity of glutaraldehyde is discussed in relation to these findings.     

A Quantitative Evaluation of the Antifungal Properties of Glutaraldehyde

Fungistatic data were obtained from measurements of mycelial growth of several fungal species in the presence of acid or alkaline glutaraldehyde. Alkaline glutaraldehyde in concentrations > 0·1% (w/v) prevented growth of all species examined while 0·5% (w/v) acid glutaraldehyde was necessary to achieve this effect. Further fungistatic data were obtained using a Coulter Counter method to measure spore swelling. Fungicidal determinations resulted in a 99·99% reduction in viable count after 90 min contact with 0·5% (w/v) alkaline glutaraldehyde. A considerable drop in spore production was also observed after treatment with alkaline glutaraldehyde.     

Bacillus megaterium spore germination is influenced by inoculum size

AIMS: The effect of spore density on the germination (time-to-germination, percent germination) of Bacillus megaterium spores on tryptic soy agar was determined using direct microscopic observation. METHODS AND RESULTS: Inoculum size varied from approximately 10(3) to 10(8) cfu ml(-1) in a medium where pH=7 and the sodium chloride concentration was 0.5% w/v. Inoculum size was measured by global inoculum size (the concentration of spores on a microscope slide) and local inoculum size (the number of spores observed in a given microscope field of observation). Both global and local inoculum sizes had a significant effect on time-to-germination (TTG), but only the global inoculum size influenced the percentage germination of the observed spores. CONCLUSIONS: These results show that higher concentrations of Bacillus megaterium spores encourage more rapid germination and more spores to germinate, indicating that low spore populations do not behave similarly to high spore populations. SIGNIFICANCE AND IMPACT OF THE STUDY: A likely explanation for the inoculum size-dependency of germination would be chemical signalling or quorum sensing between Bacillus spores.     

Sporicidal action of alkaline glutaraldehyde: factors influencing activity and a comparison with other aldehydes

The sporicidal efficacy of glutaraldehyde (2% w/v) was investigated under various conditions. Numerous factors influenced its activity: method of spore production, inherent spore resistance characteristics, alkalination, storage time and storage temperature. The sporicidal action of 2% alkaline glutaraldehyde at room temperature was compared with that of other aldehydes and commercially available formulations. Cidex (glutaraldehyde) and Sporicidin (glutaraldehyde + phenol full strength) were the most effective, followed by 8% (w/v) formaldehyde and 10% (v/v) Gigasept, a formaldehyde-containing product. Five per cent (v/v) Gigasept and 10% (w/v) glyoxal also had good sporicidal activity, though that of Sporicidin (1 : 16) was poor. No activity was observed with 10% (w/v) butyraldehyde.     

Sporicidal action of alkaline glutaraldehyde: factors influencing activity and a comparison with other aldehydes

The sporicidal efficacy of glutaraldehyde (2% w/v) was investigated under various conditions. Numerous factors influenced its activity: method of spore production, inherent spore resistance characteristics, alkalination, storage time and storage temperature. The sporicidal action of 2% alkaline glutaraldehyde at room temperature was compared with that of other aldehydes and commercially available formulations. Cidex (glutaraldehyde) and Sporicidin (glutaraldehyde + phenol full strength) were the most effective, followed by 8% (w/v) formaldehyde and 10% (v/v) Gigasept, a formaldehyde-containing product. Five per cent (v/v) Gigasept and 10% (w/v) glyoxal also had good sporicidal activity, though that of Sporicidin (1:16) was poor. No activity was observed with 10% (w/v) butyraldehyde.     

Combined Effects of Diphenyliodonium Chloride, Pine Oils, and Mustard Oil Soaps on Certain Microorganisms

Bactericidal and bacteriostatic activities of an emulsion containing 10.0% (v/v) terpineol, 0.5% (w/v) diphenyliodonium chloride, 11.0% (v/v) ethyl alcohol, and 5.62% saponified mustard oil were tested against a number of different types of organisms. The bactericidal concentration for Salmonella typhosa was 1:400. In the presence of 5.0% horse serum, it increased to 1:250. The bacteriostatic concentration varied from organism to organism; Escherichia coli and Staphylococcus aureus required 4,000 mug/ml for complete bacteriostasis, whereas Corynebacterium diphtheriae, Salmonella paratyphi-A, and Shigella required only 2,000 mug/ml for complete inhibition. A 4.0% concentration of the emulsion killed the spores of Bacillus subtilis within 6 hr.     

The Combined Effect of Hydrogen Peroxide and Ultraviolet Irradiation on Bacterial Spores

Ultra-violet (u.v.) light irradiation of spores of Bacillus subtilis in the presence of hydrogen peroxide produced a rapid kill which was up to 2000-fold greater than that produced by irradiation alone. A kill of 99–99% was produced by 30s u.v. irradiation of spores of 6 strains of Bacillus and Clostridium in the presence of hydrogen peroxide 1.0 g/100 ml but with the more resistant spores of 9 further strains, irradiation in the presence of hydrogen peroxide 2–5 g/100 ml followed by mild heating was required.     

The Effect of Sodium Chloride on Heat Resistance and Recovery of Heated Spores of Bacillus stearothermophilus

Increasing concentrations (2, 4 and 8% w/v) of sodium chloride in the heating medium progressively reduced the heat resistance of spores of Bacillus stearothermophilus. Storage at 4° in water or in sodium chloride solutions had little effect on viable counts of unheated spores, but with the increase in sodium chloride concentration there was a reduction in the heat activation effect and a small decrease in heat resistance of the spores. Increasing the severity of heat treatment rendered spores increasingly sensitive to sodium chloride in the plating medium.     

THE INACTIVATION OF BACILLUS SUBTILIS SPORES IN PENICILLIN BY GAMMA RADIATION

SUMMARY: Sodium benzylpenicillin, contaminated with Bacillus subtilis spores by freeze-drying a suspension of spores in an aqueous penicillin solution ( c . 50% w/v), was exposed to gamma radiation and a 70-tube dilution method was used to determine the surviving spores after various doses. The correlation coefficient between log₁₀ percentage survival and dose was −0.9523. The regression of the former on the latter was calculated and the decimal reduction dose found to be 20.2 × 10⁴ rads. The regression and the decimal reduction dose were similar to those obtained when suspensions of spores in distilled water were irradiated.     

The kinetics of Bacillus subtilis spore inactivation on filter paper by u.v. light and u.v. light in combination with hydrogen peroxide

Inactivation of spores of Bacillus subtilis (ATCC 6633) on two different grades of cellulose filter paper (Whatman Grades 2 and 6), by ultraviolet light (u.v.), at an intensity of approximately 4·5 Wm⁻² and at fluences of up to 2 × 10³ Jm⁻², and u.v. in the presence of hydrogen peroxide, is described in terms of multi-target and single hit–single target kinetic expressions. Wet spores were inactivated at rates ranging from 6·7 to 10·6 higher than that of dry spores on both grades of filter paper. In addition, spore inactivation was up to 5·6 times more rapid on Grade 2 filter paper. Synergistic inactivation was seen to occur when spores were irradiated in the presence of 1% (w/v) hydrogen peroxide with rates up to 5·3 times higher than with treatment solely by u.v. The results obtained are discussed in general terms with particular reference to surface characteristics which might provide shielding to micro-organisms from incident u.v. light.     

Resistance of Bacillus Spores to Combined Sporicidal Treatments

S ummary . Moist heat at 82° (100° for Bacillus stearothermophilus ) and solutions of 0.2% w/v chlorocresol or 0.01% w/v benzalkonium chloride at 24° separately showed no sporicidal activity against B. pumilis, B. stearothermophilus, B. subtilis and B. subtilis var. niger . Spores of the last organism were the most sensitive to γ radiation, the D value being 0.16 Mrad. Prior irradiation with a dose of 0.16 Mrad brought about only a slight increase in the sensitivity of the spores to moist heat. The presence of bactericide during irradiation did not affect radiation resistance. Inactivation rates were greater when the spores were heated in the presence of a bactericide than in aqueous suspension and benzalkonium chloride was more active than chlorocresol. Chlorocresol enhanced the heat activation of B. stearothermophilus at 100°. Irradiation in the presence of 0.2% w/v chlorocresol or 0.01% w/v benzalkonium chloride had no effect on the subsequent resistance of the spores when heated in the presence of these bactericides. It is concluded that it is unlikely that combinations of moist heat, radiation and bactericides, each less severe than when used in an accepted sterilization process, will lead to an alternative process which, while less damaging to the materials being sterilized, would still maintain the accepted standards of freedom from contamination.     

Possible mechanisms for the revival of glutaraldehyde-treated spores of Bacillus subtilis NCTC 8236

Spores of Bacillus subtilis NCTC 8236 were exposed to 2% alkaline glutaraldehyde and subsequently subjected to various treatments in an attempt to revive injured spores. Treatment with alkali (sodium or potassium hydroxide or, to a lesser extent, sodium bicarbonate) proved to be most successful. Some revival was achieved after thermal treatment. No revival was obtained with lysozyme or with various types of coat-removing agents. Experiments designed to distinguish between germination and outgrowth in the revival process established that sodium hydroxide (optimum concentration, 20 mmol/l) added to glutaraldehyde-treated spores increased the potential for germination. In contrast, spores which had been allowed to germinate before exposure to low concentrations of glutaraldehyde and then to sodium hydroxide were inhibited at the outgrowth phase to a much greater extent than germinated spores treated with the dialdehyde without subsequent alkali exposure. The results overall are discussed in terms of the possible mechanism and site of action of glutaraldehyde and the practical implications and significance of its use as a sporicide.     

Possible mechanisms for the revival of glutaraldehydetreated spores of Bacillus subtilis NCTC 8236

Spores of Bacillus subtilis NCTC 8236 were exposed to 2% alkaline glutaraldehyde and subsequently subjected to various treatments in an attempt to revive injured spores. Treatment with alkali (sodium or potassium hydroxide or, to a lesser extent, sodium bicarbonate) proved to be most successful. Some revival was achieved after thermal treatment. No revival was obtained with lysozyme or with various types of coat-removing agents. Experiments designed to distinguish between germination and outgrowth in the revival process established that sodium hydroxide (optimum concentration, 20 mmol/l) added to glutaraldehyde-treated spores increased the potential for germination. In contrast, spores which had been allowed to germinate before exposure to low concentrations of glutaraldehyde and then to sodium hydroxide were inhibited at the outgrowth phase to a much greater extent than germinated spores treated with the dialdehyde without subsequent alkali exposure. The results overall are discussed in terms of the possible mechanism and site of action of glutaraldehyde and the practical implications and significance of its use as a sporicide.     

Biological indicators for low temperature steam and formaldehyde sterilization: the effect of defined media on sporulation, growth index and formaldehyde resistance of spores of Bacillus stearothermophilus strains

Preliminary screening was carried out on spores of 29 strains of Bacillus stearothermophilus to determine their potential as biological indicator organisms for low temperature steam and formaldehyde sterilization. Each strain was sporulated on four chemically defined media. Fourteen strains produced satisfactory sporulation on one or more of the media but there was considerable variation in the extent of sporulation. The growth index of the spores, which was dependent on both the strain of organism and the sporulation medium, ranged from 1% to 90%. The spores were appraised on the basis of their resistance to inactivation by 0.5% w/v formaldehyde in aqueous solution at 70°C. The survivor curves obtained could be characterized into five types on the basis of the shape of the curve. Only five strains of Bacillus stearothermophilus produced spores with the characteristics of high resistance, linear semi-logarithmic survivor curve and high growth index that would be required of a potential biological indicator organism.     

Triple fixation of Bacillus subtilis dormant spores.

A triple-fixation method with a sequential application of 5% glutaraldehyde, 1% osmium tetroxide, and 2% potassium permanganate gave superior preservation of the ultrastructure of Bacillus subtilis dormant spores with a thick spore coat.