P1 plasmid replication. Purification and DNA-binding activity of the replication protein RepA

The minimal P1 replicon encompasses an open reading frame for the essential replication protein, RepA, bracketed by two sets of multiple 19-base pair repeated sequences, incA and incC. This study focused on the interaction of RepA with the incC and incA repeated sequences because earlier studies suggested that incA might control P1 copy number by titrating limiting amounts of RepA and because the incC repeats, which are part of the origin of replication, contain the promoter for repA. RepA is essential for origin function, autoregulates its own synthesis from the promoter, and, when overproduced, blocks origin function. In this study, RepA was overproduced from an expression vector and purified to 90% homogeneity. The binding of RepA to the DNA encompassing repeat sequences was assayed by monitoring the mobility of protein-DNA complexes on polyacrylamide gels. Distinct species of retarded bands were seen with the maximum number of bands corresponding to the number of repeats present in the target fragment. No evidence was found for RepA binding to fragments not containing the repeats. This suggests that the specific binding of RepA to the repeats may be involved in each of the diverse activities of RepA.     

Purification and characterization of RepA, a protein involved in the copy number control of plasmid pLS1.

The promiscuous streptococcal plasmid pLS1 encodes for the 5.1 kDa RepA protein, involved in the regulation of the plasmid copy number. Synthesis of RepA was observed both in Bacillus subtilis minicells and in an Escherichia coli expression system. From this system, the protein has been purified and it appears to be a dimer of identical subunits. The amino acid sequence of RepA has been determined. RepA shows the alpha helix-turn-alpha helix motif typical of many DNA-binding proteins and it shares homology with a number of repressors, specially with the TrfB repressor encoded by the broad-host-range plasmid RK2. DNase I footprinting revealed that the RepA target is located in the region of the promoter for the repA and repB genes. Trans-complementation analysis showed that in vivo, RepA behaves as a repressor by regulating the plasmid copy number. We propose that the regulatory role of RepA is by limitation of the synthesis of the initiator protein RepB.     

Interactions of the RepA1 protein with its replicon targets: two opposing roles in control of plasmid replication.

By studying the interaction of derivatives of RepFIC miniplasmids, we were able to demonstrate that under certain conditions the RepA1 initiator protein inhibits plasmid replication. An analysis of cloned derivatives whose replication is inhibited by the RepA1 protein revealed the existence of two areas of the RepFIC genome that interact with RepA1 in the inhibition reaction. One of these areas, which occurs in the origin region, was explored by in vivo methylation protection footprinting studies. The protected area was 200 bp long and showed a definite periodicity of protected and hypersensitive sites, suggesting that RepA1 promotes a topological change in the RepFIC genome. The significance of our results is discussed in the context of plasmid replication control.     

Secondary structure analysis of adenovirus tripartite leader

RNA secondary structure analysis was performed to understand the translation function of the adenovirus tripartite leader, a 200-nucleotide 5' noncoding region found on all late viral mRNAs. The tripartite leader facilitates the translation of viral mRNAs at late but not early times after infection and eliminates the normal requirement for the eukaryotic initiation factor 4F or cap binding protein complex. Secondary structures were determined by probing 5' or 3' end-labeled tripartite leader RNAs under nondenaturing conditions with various single strand-specific nucleases, and the information was used to generate a potential model structure. The resulting structure is attractive since it may explain the unusual translation behavior conferred by the tripartite leader. We demonstrate that the first leader segment is predominantly single-stranded, a property consistent with the ability to enhance translation and provide independence from cap binding protein complex. In contrast, the remaining two leader segments form a moderately stable base-paired structure, except for a large hairpin loop. To confirm these findings, the secondary structure of the tripartite leader was also probed when it was attached to a large segment of a messenger RNA and was found to be very similar to that of the individual leader RNA. These findings suggest several possible mechanisms to account for the translation activity of the tripartite leader.     

Importance of the C terminus of plasmid Rts1 RepA protein for replication and incompatibility of the plasmid.

RepA protein, essential for replication of plasmid Rts1, was found to bind in vivo immediately upstream of the repA promoter in studies with mini-Rts1 derivatives with deletions in the upstream region of repA. We constructed another series of repA mutants that would encode RepA derivatives containing oligopeptide substitutions in place of the carboxyl-terminal six amino acids. These modified RepA proteins could not activate ori (Rts1) at all and showed various degrees of incompatibility, or no incompatibility, toward a mini-Rts1 plasmid. These results suggest that the carboxyl-terminal six (or fewer) amino acids of RepA are important for exerting replication and incompatibility functions. One of the RepA derivatives, which showed an evident incompatibility without initiating replication, was examined for its ability to repress the repA gene.     

Plasmid replication functions: two distinct segments of plasmid R1, RepA and RepD, express incompatibility and are capable of autonomous replication.

The genetic determinants for replication and incompatibility of plasmid R1 were investigated by gene cloning methods, and three types of R1 miniplasmid derivatives were generated. The first, exemplified by plasmid pKT300, consisted of a single BglII endonuclease-generated deoxyribonucleic acid fragment derived from the R1 region that is located between the determinants for conjugal transfer and antibiotic resistance. Two types of miniplasmids could be formed from PstI endonuclease-generated fragments of pKT300. One of these, which is equivalent to miniplasmids previously generated from plasmids R1-19 and R1-19B2, consisted of two adjacent PstI fragments that encode the RepA replication system of plasmid R1. The other type contained a segment of R1, designated the RepD replication region, that is adjacent to the RepA region and that has not been identified previously as having the capacity for autonomous replication. Plasmid R1, therefore, contained two distinct deoxyribonucleic acid segments capable of autonomous replication. The RepA-RepD miniplasmid pKT300 had a copy number about eightfold higher than that of R1 and hence lacked a determinant for the regulation of plasmid copy number. Like R1, it was maintained stably in dividing bacteria. RepA miniplasmids had copy numbers which were two- to fourfold higher than that of R1 (i.e., which were lower than that of pKT300) and were maintained slightly less stably than those of pKT300 and R1. The RepD miniplasmid was not maintained stably in dividing bacteria. Previous experiments have shown that incompatibility of IncFII group plasmids is specified by a plasmid copy control gene. Despite the fact that RepA miniplasmids of R1 were defective in copy control, they nevertheless expressed incompatibility. This suggests that two genes are responsible for plasmid copy control, one that specifies incompatibility and is located on RepA miniplasmids and another that is located outside of, but adjacent to, the RepA replication region. Hybrid plasmids composed of pBR322 and one PstI fragment from the RepA region, P-8, exhibited incompatibility towards R2 and RepA miniplasmids but not the RepD miniplasmid, whereas hybrids composed of pBR322 and the PstI fragment of the RepD region, P-3, exhibited incompatibility towards R1 and the RepD miniplasmid but not RepA miniplasmids. These results indicate that the two replication systems are functionally distinct and that, although the RepA system is the principal replication system of R1, the RepD system also plays a role in the maintenance of this plasmid.     

P1 plasmid replication: replicon structure

Bacteriophage P1 lysogenizes Escherichia coli as a unit-copy plasmid. We have undertaken to define the plasmid-encoded elements implicated in P1 plasmid maintenance. We show that a 2081 base-pair fragment of the 90,000 base P1 plasmid confers the capacity for controlled plasmid replication. DNA sequence analysis reveals several open reading frames in this fragment. The largest is shown to encode a 32,000 Mr protein required for plasmid replication. The corresponding gene, repA, has been identified genetically. A set of five 19 base-pair repeats is located upstream from repA; a set of nine similar repeats is located immediately downstream from repA. Each set of repeats, when cloned into pBR322, exerts incompatibility towards a P1 replicon. The upstream set, designated incC, consists of direct repeats that are spaced about two turns of the DNA helix apart; the downstream set, designated incA, consists of nine repeats arranged three in one orientation and six in the other. Spacing between incA repeats were three or four turns of the helix apart. The organization of the plasmid maintenance regions of P1 and the unit-copy sex factor plasmid, F, is strikingly similar. Although the DNA sequences of this region in the two plasmids exhibit little homology, a 9 base-pair sequence that appears four times in the origin region of members of the Enterobacteriaceae also occurs twice as direct repeats in similar positions in P1 and F. This sequence, where it occurs in E. coli, has been postulated to be the binding site for the essential replication protein determined by dnaA. The dnaA protein appears not to be essential for the replication of either plasmid; therefore, the function of the sequence in P1 and F may be regulatory.     

Differential binding of wild-type and a mutant RepA protein to oriR sequence suggests a model for the initiation of plasmid R1 replication.

DNA replication of the enterobacterial plasmid R1 is initiated by RepA protein. We have developed a new procedure for the purification of RepA from inclusion bodies, which involves CHAPS-mediated solubilization. This method has been also used for the thermosensitive mutant protein RepA2623. The nucleoprotein complexes obtained with both proteins and oriR, the origin of replication, are studied in this paper. DNaseI and hydroxyl-radical footprinting suggest the presence in oriR of two sites with different affinity for RepA separated by eight helical turns. The pattern of hypersensitive sites in the footprints indicates that the oriR sequence, when complexed with RepA, is curved. The binding of RepA molecules to oriR is co-operative and this co-operativity is defective in the thermosensitive protein. Band-shift analysis of RepA-oriR complexes revealed the existence of a species with an anomalously high electrophoretic mobility that appears after formation of the first RepA-oriR complex and requires the sequential interaction of RepA with its two distal binding sites. These features lead us to propose that protein-protein interactions between RepA bound to both distal sites could be responsible for oriR looping. This model represents a novel mechanism that results in activation of an origin in a replicon that does not contain iterons.     

Hexamerization of RepA from the Escherichia coli plasmid pKL1

The Escherichia coli plasmid pKL1 is one of the smallest bacterial plasmids. It encodes a single, autoregulating structural gene, repA, responsible for replication and copy number control. The oligomerization of RepA was previously proposed as the basis of a strategy for pKL1 copy number control. To elucidate the oligomerization properties of RepA in solution, RepA was expressed in E. coli; purified by ion exchange and hydrophobic chromatography; and examined in solution by spectrapolarimetry, light scattering, sedimentation velocity, and equilibrium ultracentrifugation. RepA behaved as a concentration-dependent equilibrium of dimers and hexamers. Conformational parameters of the RepA hexameric complex were determined. These results support the proposed autogenous regulatory model whereby RepA hexamers negatively regulate repA expression thereby affecting the copy number control of pKL1. RepA of pKL1 is the first plasmid replication initiation protein documented to be in dimeric-hexameric forms.     

Crystal structure of the hexameric replicative helicase RepA of plasmid RSF1010

Unwinding of double-stranded DNA into single-stranded intermediates required for various fundamental life processes is catalyzed by helicases, a family of mono-, di- or hexameric motor proteins fueled by nucleoside triphosphate hydrolysis. The three-dimensional crystal structure of the hexameric helicase RepA encoded by plasmid RSF1010 has been determined by X-ray diffraction at 2.4 A resolution. The hexamer shows an annular structure with 6-fold rotational symmetry and a approximately 17 A wide central hole, suggesting that single-stranded DNA may be threaded during unwinding. Homologs of all five conserved sequence motifs of the DnaB-like helicase family are found in RepA, and the topography of the monomer resembles RecA and the helicase domain of the bacteriophage T7 gp4 protein. In a modeled complex, ATP molecules are located at the subunit interfaces and clearly define adenine-binding and ATPase catalytic sites formed by amino acid residues located on adjacent monomers; most remarkable is the "arginine finger" Arg207 contributing to the active site in the adjacent monomer. This arrangement of active-site residues suggests cooperativity between monomers in ATP hydrolysis and helicase activity of RepA. The mechanism of DNA unwinding remains elusive, as RepA is 6-fold symmetric, contrasting the recently published asymmetric structure of the bacteriophage T7 gp4 helicase domain.     

Clustering of genes involved in replication, copy number control, incompatibility, and stable maintenance of the resistance plasmid R1drd-19.

Plasmid R1drd-19 is present in a small number of copies per cell of Escherichia coli. The plasmid was reduced in size by in vivo as well as in vitro (cloning) techniques, resulting in a series of plasmid derivatives of different molecular weight. All plasmids isolated contain a small region (about 2 x 10(6) daltons of deoxyribonucleic acid) of the resistance transfer factor part of the plasmid located close to one of the IS1 sequences that separates the resistance transfer factor part from the resistance determinant. All these derivatives were present at the same copy number, retained the incompatibility properties of plasmid R1drd-19, and were stably maintained during cell division. Genes mutated to yield copy mutations also were found to be located in the same region.     

Genes and sites involved in replication and incompatibility of an R100 plasmid derivative based on nucleotide sequence analysis

Summary The nucleotide sequence of the entire region required for autonomous replication and incompatibility of an R100 plasmid derivative, pSM1, has been determined. This region includes the replication region and all plasmid encoded information required for replication. Numerous reading frames for possible proteins can be found in this region. The existence of one of these proteins called RepA1 (285 amino acids; 33,000 daltons) which is encoded within the region known by cloning analysis to be required for replication is supported by several lines of evidence. These include an examination of the characteristic sequences on the proximal and distal ends of the coding region, a comparison of the sequence of the replication regions of pSM1 and the highly related R1 plasmid derivative Rsc13 as well as other biochemical and genetic evidence. The existence of two other proteins, RepA3 (64 amino acids; 7000 daltons) and RepA2 (103 amino acids; 11,400 daltons) is also consistent with most of the criteria mentioned above. However, the region encoding RepA3, which by cloning analysis is within the region responsible for both replication and incompatibility, has never been demonstrated to produce a 7,000 dalton polypeptide. Since a large secondary structure can be constructed in this region, it is possible that the region contains structure or other information that is responsible for incompatibility. RepA2, encoded entirely within the region identified by cloning analysis to be responsible for incompatibility but not for replication can be visualized in vivo and in vitro. However, the nucleotide sequence of the region encoding RepA2 is completely different in mutually incompatible plasmid derivatives of R1 and R100. It is therefore unlikely that RepA2 plays a major role in incompatibility. Thus, we predict that RepA1 is required to initiate DNA synthesis at the replication origin and that the region proximal to RepA1 either encodes a gene product or structure information that is responsible for incompatibility.     

Unidirectional replication of plasmid R100

We isolated a 284 base-pair BamHI fragment of plasmid R100 that supports initiation of replication of a plasmid regardless of the orientation of the fragment. Analysis of the specific radioactivity of restriction fragments from 32P-labeled replication intermediates synthesized in vitro shows that replication of the plasmid carrying the 284 base-pair fragment is unidirectional. The direction of replication depends on the orientation of the fragment present in the plasmid. The 5' ends of the leading-strand DNA formed in the early stage of replication were mapped to a region downstream from the 284 base-pair fragment in the direction of replication. The lagging-strand DNA products were also identified and their 3' ends mapped to unique sites within the 284 base-pair fragment causing unidirectional replication of R100.