Arrangement of inner dynein arms in wild-type and mutant flagella of Chlamydomonas

We have used computer averaging of electron micrographs from longitudinal and cross-sections of wild-type and mutant axonemes to determine the arrangement of the inner dynein arms in Chlamydomonas reinhardtii. Based on biochemical and morphological data, the inner arms have previously been described as consisting of three distinct subspecies, I1, I2, and I3. Our longitudinal averages revealed 10 distinguishable lobes of density per 96-nm repeating unit in the inner row of dynein arms. These lobes occurred predominantly but not exclusively in two parallel rows. We have analyzed mutant strains that are missing I1 and I2 subspecies. Cross-sectional averages of pf9 axonemes, which are missing the I1 subspecies, showed a loss of density in both the inner and outer portions of the inner arm. Averages from longitudinal images showed that three distinct lobes were missing from a single region; two of the lobes were near the outer arms but one was more inward. Serial 24-nm cross-sections of pf9 axonemes showed a complete gap at the proximal end of the repeating unit, confirming that the I1 subunit spans both inner and outer portions of the inner arm region. Examination of pf23 axonemes, which are missing both I1 and I2 subspecies, showed an additional loss almost exclusively in the inner portion of the inner arm. In longitudinal view, this additional loss occurred in three separate locations and consisted of three inwardly placed lobes, one adjacent to each of the two radial spokes and the third at the distal end of the repeating unit. These same lobes were absent ida4 axonemes, which lack only the I2 subspecies. The I2 subspecies thus does not consist of a single dynein arm subunit in the middle of the repeating unit. The radial spoke suppressor mutation, pf2, is missing four polypeptides of previously unknown location. Averages of these axonemes were missing a portion of the structures remaining in pf23 axonemes. This result suggests that polypeptides of the radial spoke control system are close to the inner dynein arms.     

The proximal portion of Chlamydomonas flagella contains a distinct set of inner dynein arms

A specific type of inner dynein arm is located primarily or exclusively in the proximal portion of Chlamydomonas flagella. This dynein is absent from flagella less than 6 microns long, is assembled during the second half of flagellar regeneration time and is resistant to extraction under conditions causing complete solubilization of two inner arm heavy chains and partial solubilization of three other heavy chains. This and other evidence described in this report suggest that the inner arm row is composed of five distinct types of dynein arms. Therefore, the units of three inner arms that repeat every 96 nm along the axoneme are composed of different dyneins in the proximal and distal portions of flagella.     

The inner dynein arms I2 interact with a "dynein regulatory complex" in Chlamydomonas flagella.

We provide indirect evidence that six axonemal proteins here referred to as "dynein regulatory complex" (drc) are located in close proximity with the inner dynein arms I2 and I3. Subsets of drc subunits are missing from five second-site suppressors, pf2, pf3, suppf3, suppf4, and suppf5, that restore flagellar motility but not radial spoke structure of radial spoke mutants. The absence of drc components is correlated with a deficiency of all four heavy chains of inner arms I2 and I3 from axonemes of suppressors pf2, pf3, suppf3, and suppf5. Similarly, inner arm subunits actin, p28, and caltractin/centrin, or subsets of them, are deficient in pf2, pf3, and suppf5. Recombinant strains carrying one of the mutations pf2, pf3, or suppf5 and the inner arm mutation ida4 are more defective for I2 inner arm heavy chains than the parent strains. This evidence indicates that at least one subunit of the drc affects the assembly of and interacts with the inner arms I2.     

Extragenic suppressors of paralyzed flagellar mutations in Chlamydomonas reinhardtii identify loci that alter the inner dynein arms

We have analyzed extragenic suppressors of paralyzed flagella mutations in Chlamydomonas reinhardtii in an effort to identify new dynein mutations. A temperature-sensitive allele of the PF16 locus was mutagenized and then screened for revertants that could swim at the restrictive temperature (Dutcher et al. 1984. J. Cell Biol. 98:229-236). In backcrosses of one of the revertant strains to wild-type, we recovered both the original pf16 mutation and a second, unlinked suppressor mutation with its own flagellar phenotype. This mutation has been identified by both recombination and complementation tests as a new allele of the previously uncharacterized PF9 locus on linkage group XII/XIII. SDS-PAGE analysis of isolated flagellar axonemes and dynein extracts has demonstrated that the pf9 strains are missing four polypeptides that form the I1 inner arm dynein subunit. The primary effect of the loss of the I1 subunit is a decrease in the forward swimming velocity due to a change in the flagellar waveform. Both the flagellar beat frequency and the axonemal ATPase activity are nearly wild-type. Examination of axonemes by thin section electron microscopy and image averaging methods reveals that a specific domain of the inner arm complex is missing in the pf9 mutant strains (see accompanying paper by Mastronarde et al.). When combined with other flagellar defects, the loss of the I1 subunit has synergistic effects on both flagellar assembly and flagellar motility. These synthetic phenotypes provide a screen for new suppressor mutations in other loci. Using this approach, we have identified the first interactive suppressors of a dynein arm mutation and an unusual bypass suppressor mutation.     

The architecture of outer dynein arms in situ

Outer dynein arms, the force generators for axonemal motion, form arrays on microtubule doublets in situ, although they are bouquet-like complexes with separated heads of multiple heavy chains when isolated in vitro. To understand how the three heavy chains are folded in the array, we reconstructed the detailed 3D structure of outer dynein arms of Chlamydomonas flagella in situ by electron cryo-tomography and single-particle averaging. The outer dynein arm binds to the A-microtubule through three interfaces on two adjacent protofilaments, two of which probably represent the docking complex. The three AAA rings of heavy chains, seen as stacked plates, are connected in a striking manner on microtubule doublets. The tail of the alpha-heavy chain, identified by analyzing the oda11 mutant, which lacks alpha-heavy chain, extends from the AAA ring tilted toward the tip of the axoneme and towards the inside of the axoneme at 50 degrees , suggesting a three-dimensional power stroke. The neighboring outer dynein arms are connected through two filamentous structures: one at the exterior of the axoneme and the other through the alpha-tail. Although the beta-tail seems to merge with the alpha-tail at the internal side of the axoneme, the gamma-tail is likely to extend at the exterior of the axoneme and join the AAA ring. This suggests that the fold and function of gamma-heavy chain are different from those of alpha and beta-chains.     

Bending patterns of Chlamydomonas flagella: IV. Mutants with defects in inner and outer dynein arms indicate differences in dynein arm function

Mutants with outer dynein arm defects or deficiencies all show a major reduction in beat frequency to about half the normal value; some of these mutants show an additional decrease in sliding velocity associated with reduced shear amplitude and an additional reduction in beat frequency, as well as other more minor modifications of the normal forward mode bending pattern. New mutants (ida98, pf30), which appear to be deficient in a subset of inner dynein arms show a reduction in sliding velocity that is primarily associated with a reduction in shear amplitude, with only a small reduction in beat frequency. These differences in motility phenotype between inner and outer dynein arm mutants suggest that inner and outer dynein arms may have distinct functions. The relatively large decrease in sliding velocity associated with partial loss of inner arms is consistent with earlier observations on pf23, a nonmotile mutant lacking inner arms, suggesting that inner arms may have an essential function in motility. The ability to generate reverse mode bending patterns is retained in some inner or outer dynein arm mutants, but appears to be decreased in those mutants which show reduced shear amplitude for the forward mode bending pattern.     

Structural and functional reconstitution of inner dynein arms in Chlamydomonas flagellar axonemes

The inner row of dynein arms contains three dynein subforms. Each is distinct in composition and location in flagellar axonemes. To begin investigating the specificity of inner dynein arm assembly, we assessed the capability of isolated inner arm dynein subforms to rebind to their appropriate positions on axonemal doublet microtubules by recombining them with either mutant or extracted axonemes missing some or all dyneins. Densitometry of Coomassie blue-stained polyacrylamide gels revealed that for each inner dynein arm subform, binding to axonemes was saturable and stoichiometric. Using structural markers of position and polarity, electron microscopy confirmed that subforms bound to the correct inner arm position. Inner arms did not bind to outer arm or inappropriate inner arm positions despite the availability of sites. These and previous observations implicate specialized tubulin isoforms or nontubulin proteins in designation of specific inner dynein arm binding sites. Further, microtubule sliding velocities were restored to dynein-depleted axonemes upon rebinding of the missing inner arm subtypes as evaluated by an ATP-induced microtubule sliding disintegration assay. Therefore, not only were the inner arm dynein subforms able to identify and bind to the correct location on doublet microtubules but they bound in a functionally active conformation.     

Microtubule sliding in mutant Chlamydomonas axonemes devoid of outer or inner dynein arms

To clarify the functional differentiation between the outer and inner dynein arms in eukaryotic flagella, their mechanochemical properties were assessed by measuring the sliding velocities of outer-doublet microtubules in disintegrating axonemes of Chlamydomonas, using wild-type and mutant strains that lack either of the arms. A special procedure was developed to induce sliding disintegration in Chlamydomonas axonemes which is difficult to achieve by ordinary methods. The flagella were first fragmented by sonication, demembranated by Nonidet P-40, and then perfused under a microscope with Mg-ATP and nagarse, a bacterial protease with broad substrate specificity. The sliding velocity varied with the Mg-ATP concentration in a Michaelis-Menten manner in the axonemes from the wild type and a motile mutant lacking the outer dynein arm (oda38). The maximal sliding velocity and apparent Michaelis constant for Mg-ATP were measured to be 13.2 +/- 1.0 micron/s and 158 +/- 36 microM for the wild type and 2.0 +/- 0.1 micron/s and 64 +/- 18 microM for oda38. These maximal sliding velocities were significantly smaller than those estimated in beating axonemes; the reason is not clear. The velocities in the presence or absence of 10(-5) M Ca2+ did not differ noticeably. The axonemes of nonmotile mutants lacking either outer arms (pf13A, pf22) or inner arms (pf23) were examined for their ability to undergo sliding disintegration in the presence of 0.1 mM Mg-ATP. Whereas pf13A axonemes underwent normal sliding disintegration, the other two species displayed it only very poorly. The poor ability of pf23 axonemes to undergo sliding disintegration raises the possibility that the outer dynein arm cannot function well in the absence of the inner arm.     

The substructure of isolated and in situ outer dynein arms of sea urchin sperm flagella

Outer-arm dynein from the sperm of the sea urchin S. purpuratus was adsorbed to mica flakes and visualized by the quick-freeze, deep-etch technique. Replicas reveal particles comprised of two globular heads joined by two irregularly shaped stems which make contact along their length. One head is pear-shaped (18.5 X 12.5 nm) and the other is spherical (14.5-nm diam). The stems are decorated by a complex of bead-like subunits. The same two-headed protein is found in the 21S dynein-1 fraction of sucrose gradients. The beta-heavy chain/intermediate chain 1 (beta/IC-1) dynein subfraction, produced by low-salt dialysis and zonal centrifugation of the high-salt-extracted dynein-1, contains only single-headed molecules with single stems. These heads are predominantly pear-shaped (18.5 X 12.5 nm). Since 21S dynein-1 contains two heavy chains (alpha and beta), and the beta/IC-1 subfraction is comprised of only the beta-heavy chain (Tang et al., 1982, J. Biol. Chem. 257: 508-515), we conclude that each head is formed by a heavy chain, that the pear-shaped head contains the beta-heavy chain, and that the spherical head contains the alpha-heavy chain. The in situ outer dynein arms of demembranated sperm were also studied by the quick-freeze, deep-etch method. When frozen in reactivation buffer devoid of ATP, each arm consists of a large globular head that attaches to the A-microtubule by distally skewed subunits and attaches to the B-microtubule by a slender stalk. In ATP, this head shifts its orientation such that it can be seen to be constructed from two globular domains. We offer possible correlates between the in situ and the in vitro images, and we compare the structure of sea-urchin dynein with dynein previously described from Chlamydomonas and Tetrahymena.     

ATP production in Chlamydomonas reinhardtii flagella by glycolytic enzymes

Eukaryotic cilia and flagella are long, thin organelles, and diffusion from the cytoplasm may not be able to support the high ATP concentrations needed for dynein motor activity. We discovered enzyme activities in the Chlamydomonas reinhardtii flagellum that catalyze three steps of the lower half of glycolysis (phosphoglycerate mutase, enolase, and pyruvate kinase). These enzymes can generate one ATP molecule for every substrate molecule consumed. Flagellar fractionation shows that enolase is at least partially associated with the axoneme, whereas phosphoglycerate mutase and pyruvate kinase primarily reside in the detergent-soluble (membrane + matrix) compartments. We further show that axonemal enolase is a subunit of the CPC1 central pair complex and that reduced flagellar enolase levels in the cpc1 mutant correlate with the reduced flagellar ATP concentrations and reduced in vivo beat frequencies reported previously in the cpc1 strain. We conclude that in situ ATP synthesis throughout the flagellar compartment is essential for normal flagellar motility.     

Transport and arrangement of the outer-dynein-arm docking complex in the flagella of Chlamydomonas mutants that lack outer dynein arms

The outer dynein arms of Chlamydomonas flagella are attached to a precise site on the outer doublet microtubules and repeat at a regular interval of 24 nm. This binding is mediated by the outer dynein arm docking complex (ODA-DC), which is composed of three protein subunits. In this study, antibodies against the 83- and 62-kD subunits (DC83 and DC62) of the ODA-DC were used to analyze its state of association with outer arm components within the cytoplasm, and its localization in the axonemes of oda mutants. Immunoprecipitation indicates that DC83 and DC62 are preassembled within the cytoplasm, but that they are not associated with outer arm dynein. Both proteins are lost or greatly diminished in oda1 and oda3, mutants in the structural genes of DC62 and DC83, respectively, demonstrating that their association is necessary for their stable presence in the cytoplasm. Immunoelectron microscopy indicates that DC83 repeats at 24-nm intervals along the length of the doublet microtubules of oda6, which lacks outer arms; thus, outer arm periodicity may be determined by the ODA-DC. Flagellar regeneration and temporary dikaryon experiments indicate that the ODA-DC can be rapidly transported into the flagellum and assembled on the doublet microtubules independently of the outer arms and independently of flagellar growth. Unexpectedly, the intensity of ODA-DC labeling decreased toward the distal ends of axonemes of oda6 but not wild-type cells, suggesting that the outer arms reciprocally contribute to the assembly/stability of the ODA-DC.     

Structural comparison of purified dynein proteins with in situ dynein arms

Using the quick-freeze deep-etch technique, we describe the structure of outer-arm dynein proteins from Chlamydomonas and Tetrahymena after adsorption to a mica surface, after high-salt dissociation, and after glutaraldehyde fixation, and compare these images to the configuration of outer arms bound to microtubules. After adsorption to mica, the extracted dyneins from both organisms look like three-headed “bouquets”, as reported for Tetrahymena by Johnson & Wall (1983b). High magnification images demonstrate that each head carries a slender “stalk” and a long “stem”, and that small subunits decorate the stems and create a “flowerpot” domain at the base of the bouquet. Exposure to high salt induces this trimer to dissociate into a two-headed species and a single-headed species; it also stimulates the decorative elements to dissociate from the stems. Dynein is thus constructed on the same general plan as myosin, with large globular heads, narrow stems and additional small subunits that associate with the stems. The splayed-out image of the bouquet appears to be a distortion arising during adsorption to mica since, after brief glutaraldehyde fixation, the three heads remain closely associated as vertices of a triangular unit. In situ, the three heads also adopt this trigonal configuration. Two of the three are visible from the exterior of the axoneme and constitute the bilobed rigor head we described previously (Goodenough & Heuser, 1982). The third head faces the interior of the axoneme where, we propose, it forms the “hook” of the outer arm as seen in thin section. We further propose that the decorative elements associated with the stem coalesce to form the two outer-arm “feet” seen in situ, and that at least one of the in vitro stalks is equivalent to the in situ stalk, which extends from the head to the B microtubule. Deep-etch images of stretched axonemes, partially extracted axonemes, and dynein-decorated brain microtubules indicate that each outer arm, as traditionally viewed, is a hybrid of two dynein molecules: its two feet derive from one molecule, whereas its trigonal head derives from the molecule located distally. The resultant overlapping configuration creates the diagonal “linkers” seen in situ, which correspond to the in vitro stems. Thus, a row of dynein arms is essentially a dynein polymer that extends from the tip to the base of a doublet microtubule, each head riding on its neighbor's feet like a row of circus elephants. Such dynein-dynein interactions may account for the co-operativity of dynein-microtubule binding, and may play an important role in generating ciliary motility.     

Function and dynamics of PKD2 in Chlamydomonas reinhardtii flagella

To analyze the function of ciliary polycystic kidney disease 2 (PKD2) and its relationship to intraflagellar transport (IFT), we cloned the gene encoding Chlamydomonas reinhardtii PKD2 (CrPKD2), a protein with the characteristics of PKD2 family members. Three forms of this protein (210, 120, and 90 kD) were detected in whole cells; the two smaller forms are cleavage products of the 210-kD protein and were the predominant forms in flagella. In cells expressing CrPKD2-GFP, about 10% of flagellar CrPKD2-GFP was observed moving in the flagellar membrane. When IFT was blocked, fluorescence recovery after photobleaching of flagellar CrPKD2-GFP was attenuated and CrPKD2 accumulated in the flagella. Flagellar CrPKD2 increased fourfold during gametogenesis, and several CrPKD2 RNA interference strains showed defects in flagella-dependent mating. These results suggest that the CrPKD2 cation channel is involved in coupling flagellar adhesion at the beginning of mating to the increase in flagellar calcium required for subsequent steps in mating.     

Inner dynein arms but not outer dynein arms require the activity of kinesin homologue protein KHP1(FLA10) to reach the distal part of flagella in Chlamydomonas

Inner dynein arms, but not outer dynein arms, require the activity of KHP1(FLA10) to reach the distal part of axonemes before binding to outer doublet microtubules. We have analyzed the rescue of inner or outer dynein arms in quadriflagellate dikaryons by immunofluorescence microscopy of p28(IDA4), an inner dynein arm light chain, or IC69(ODA6), an outer dynein arm intermediate chain. In dikaryons two strains with different genetic backgrounds share the cytoplasm. As a consequence, wild-type axonemal precursors are transported to and assembled in mutant axonemes to complement the defects. The rescue of inner dynein arms containing p28 in ida4-wild-type dikaryons progressively occurred from the distal part of the axonemes and with time was extended towards the proximal part. In contrast, the rescue of outer dynein arms in oda2-wild-type dikaryons progressively occurred along the entire length of the axoneme. Rescue of inner dynein arms containing p28 in ida4fla10-fla10 dikaryons was similar to the rescue observed in ida4-wild-type dikaryons at 21 degrees C, whereas it was inhibited at 32 degrees C, a nonpermissive temperature for KHP1(FLA10). In contrast, rescue of outer dynein arms in oda2fla10-fla10 dikaryons was similar to the rescue observed in oda2-wild-type dikaryons at both 21 degrees and 32 degrees C and was not inhibited at 32 degrees C. Positioning of substructures in the internal part of the axonemal shaft requires the activity of kinesin homologue protein 1.     

Bend propagation drives central pair rotation in Chlamydomonas reinhardtii flagella

Regulation of motile 9+2 cilia and flagella depends on interactions between radial spokes and a central pair apparatus. Although the central pair rotates during bend propagation in flagella of many organisms and rotation correlates with a twisted central pair structure, propulsive forces for central pair rotation and twist are unknown. Here we compared central pair conformation in straight, quiescent flagella to that in actively beating flagella using wild-type Chlamydomonas reinhardtii and mutants that lack radial spoke heads. Twists occur in quiescent flagella in both the presence and absence of spoke heads, indicating that spoke--central pair interactions are not needed to generate torque for twisting. Central pair orientation in propagating bends was also similar in wild type and spoke head mutant strains, thus orientation is a passive response to bend formation. These results indicate that bend propagation drives central pair rotation and suggest that dynein regulation by central pair--radial spoke interactions involves passive central pair reorientation to changes in bend plane.     

The bop2-1 mutation reveals radial asymmetry in the inner dynein arm region of Chlamydomonas reinhardtii

Strains of Chlamydomonas reinhardtii with a mutant allele at the BOP2 locus swim slowly and have an abnormal flagellar waveform similar to previously identified strains with defects in the inner arm region. Double mutant strains with the bop2-1 allele and any of 17 different mutations that affect the dynein arm region swim more slowly than either parent, which suggests that the bop2-1 mutation does not affect solely the outer dynein arms, the I1 or ida4 inner dynein arms, or the dynein regulatory complex. Flagellar axonemes isolated from bop2-1 cells are missing a phosphorylated polypeptide of 152 kD. Electron microscopic analysis shows that bop2-1 axonemes are missing density in the inner dynein arm region. Surprisingly, two populations of images were observed in longitudinal sections of axonemes from the bop2-1 strain. In the 10 longitudinal axonemes examined, a portion of the dynein regulatory complex and a newly identified structure, the projection, are affected. In five of these 10 longitudinal axonemes examined, two lobes of the ida4 inner arm are also missing. By examining the cross-sectional images of wild-type and bop2-1 axonemes at each outer doublet position around the axoneme, we have determined that the bop2-1 mutation affects the assembly of inner arm region components in a doublet specific manner. Doublets 5, 6, and 8 have the most severe deficiency, doublet 9 has an intermediate phenotype, and doublets 2, 3, 4, and 7 have the least severe phenotype. The bop2-1 mutation provides the first evidence of radial asymmetry in the inner dynein arm region.     

A motile Chlamydomonas flagellar mutant that lacks outer dynein arms

A new Chlamydomonas flagellar mutant, pf-28, which swims more slowly than wild-type cells, was selected. Thin-section electron microscopy revealed the complete absence of outer-row dynein arms in this mutant, whereas inner-row arms and other axonemal structures appeared normal. SDS PAGE analysis also indicated that polypeptides previously identified as outer-arm dynein components are completely absent in pf-28. The two ATPases retained by this mutant sediment at 17.7S and 12.7S on sucrose gradients that contain 0.6 M KCl. Overall swimming patterns of pf-28 differ little from wild-type except that forward swimming speed is reduced to 35% of the wild-type value, and cells show little or no backward movement during photophobic avoidance. Mutant cells will respond to phototactic stimuli, and their flagella will beat in either the forward or reverse mode. This is the first report of a mutant that lacks dynein arms that can swim.     

Substructure of inner dynein arms, radial spokes, and the central pair/projection complex of cilia and flagella

The substructure of the components of the axoneme interior--the inner dynein arms, the radial spokes, and the central pair/projection complex--was analyzed for Chlamydomonas. Tetrahymena, Strongelocentrotus, and Mnemiopsis using the quick-freeze, deep-etch technique. The inner arms are shown to resemble the outer arms in overall molecular organization, but they are disposed differently on the microtubule and have two distinct morphologies--dyads with two heads and triads with three. The dyads associate with spokes S3 and S2; the triads associate with S1. The spokes form a three-start right-handed helix with a 288-nm rise; the central pair makes a shallow left-handed twist. The spoke heads are shown to be made up of four major subunits; two bind to the spoke shaft and two bind to a pair of central-sheath projections.