Effect of guanidine and arginine on protein–ligand interactions in multimodal cation‐exchange chromatography

The addition of fluid phase modifiers provides significant opportunities for increasing the selectivity of multimodal chromatography. In order to optimize this selectivity, it is important to understand the fundamental interactions between proteins and these modifiers. To this end, molecular dynamics (MD) simulations were first performed to study the interactions of guanidine and arginine with three proteins. The simulation results showed that both guanidine and arginine interacted primarily with the negatively charged regions on the proteins and that these regions could be readily predicted using electrostatic potential maps. Protein surface characterization was then carried out using computationally efficient coarse‐grained techniques for a broader set of proteins which exhibited interesting chromatographic retention behavior upon the addition of these modifiers. It was shown that proteins exhibiting an increased retention in the presence of guanidine possessed hydrophobic regions adjacent to negatively charged regions on their surfaces. In contrast, proteins which exhibited a decreased binding in the presence of guanidine did not have hydrophobic regions adjacent to negatively charged patches. These results indicated that the effect of guanidine could be described as a combination of competitive binding, charge neutralization and increased hydrophobic interactions for certain proteins. In contrast, arginine resulted in a significant decrease in protein retention times primarily due to competition for the resin and steric effects, with minimal accompanying increase in hydrophobic interactions. The approach presented in this paper which employs MD simulations to guide the application of coarse‐grained approaches is expected to be extremely useful for methods development in downstream bioprocesses. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:435–447, 2017     

Rational design of viscosity reducing mutants of a monoclonal antibody: Hydrophobic versus electrostatic inter-molecular interactions

High viscosity of monoclonal antibody formulations at concentrations ≥100 mg/mL can impede their development as products suitable for subcutaneous delivery. The effects of hydrophobic and electrostatic intermolecular interactions on the solution behavior of MAB 1, which becomes unacceptably viscous at high concentrations, was studied by testing 5 single point mutants. The mutations were designed to reduce viscosity by disrupting either an aggregation prone region (APR), which also participates in 2 hydrophobic surface patches, or a negatively charged surface patch in the variable region. The disruption of an APR that lies at the interface of light and heavy chain variable domains, V_H and V_L, via L45K mutation destabilized MAB 1 and abolished antigen binding. However, mutation at the preceding residue (V44K), which also lies in the same APR, increased apparent solubility and reduced viscosity of MAB 1 without sacrificing antigen binding or thermal stability. Neutralizing the negatively charged surface patch (E59Y) also increased apparent solubility and reduced viscosity of MAB 1, but charge reversal at the same position (E59K/R) caused destabilization, decreased solubility and led to difficulties in sample manipulation that precluded their viscosity measurements at high concentrations. Both V44K and E59Y mutations showed similar increase in apparent solubility. However, the viscosity profile of E59Y was considerably better than that of the V44K, providing evidence that inter-molecular interactions in MAB 1 are electrostatically driven. In conclusion, neutralizing negatively charged surface patches may be more beneficial toward reducing viscosity of highly concentrated antibody solutions than charge reversal or aggregation prone motif disruption.     

Rational design of viscosity reducing mutants of a monoclonal antibody: Hydrophobic versus electrostatic inter-molecular interactions

High viscosity of monoclonal antibody formulations at concentrations ≥100 mg/mL can impede their development as products suitable for subcutaneous delivery. The effects of hydrophobic and electrostatic intermolecular interactions on the solution behavior of MAB 1, which becomes unacceptably viscous at high concentrations, was studied by testing 5 single point mutants. The mutations were designed to reduce viscosity by disrupting either an aggregation prone region (APR), which also participates in 2 hydrophobic surface patches, or a negatively charged surface patch in the variable region. The disruption of an APR that lies at the interface of light and heavy chain variable domains, V_H and V_L, via L45K mutation destabilized MAB 1 and abolished antigen binding. However, mutation at the preceding residue (V44K), which also lies in the same APR, increased apparent solubility and reduced viscosity of MAB 1 without sacrificing antigen binding or thermal stability. Neutralizing the negatively charged surface patch (E59Y) also increased apparent solubility and reduced viscosity of MAB 1, but charge reversal at the same position (E59K/R) caused destabilization, decreased solubility and led to difficulties in sample manipulation that precluded their viscosity measurements at high concentrations. Both V44K and E59Y mutations showed similar increase in apparent solubility. However, the viscosity profile of E59Y was considerably better than that of the V44K, providing evidence that inter-molecular interactions in MAB 1 are electrostatically driven. In conclusion, neutralizing negatively charged surface patches may be more beneficial toward reducing viscosity of highly concentrated antibody solutions than charge reversal or aggregation prone motif disruption.     

Thermal aggregation of alpha-chymotrypsin: role of hydrophobic and electrostatic interactions

We have recently reported that electrostatic interactions may play a critical role in alcohol-induced aggregation of alpha-chymotrypsin (CT). In the present study, we have investigated the heat-induced aggregation of this protein. Thermal aggregation of CT obeyed a characteristic pattern, with a clear lag phase followed by a sharp rise in turbidity. Intrinsic and ANS fluorescence studies, together with fluorescence quenching by acrylamide, suggested that the hydrophobic patches are more exposed in the denatured conformation. Typical chaperone-like proteins, including alpha- and beta-caseins and alpha-crystalline could inhibit thermal aggregation of CT, and their inhibitory effect was nearly pH-independent (within the pH range of 7-9). This was partially counteracted by alpha-, beta- and especially gamma-cyclodextrins, suggesting that hydrophobic interactions may play a major role. Loss of thermal aggregation at extreme acidic and basic conditions, combined with changes in net charge/pH profile of aggregation upon chemical modification of lysine residues are taken to support concomitant involvement of electrostatic interactions.     

How evolutionary pressure against protein aggregation shaped chaperone specificity

As protein aggregation is potentially lethal, control of protein conformation by molecular chaperones is essential for cellular organisms. This is especially important during protein expression and translocation, since proteins are then unfolded and therefore most susceptible to form non-native interactions. Using TANGO, a statistical mechanics algorithm to predict protein aggregation, we here analyse the aggregation propensities of 28 complete proteomes. Our results show that between 10% and 20% of the residues in these proteomes are within aggregating protein segments and that this represents a lower limit for the aggregation tendency of globular proteins. Further, we show that not only evolution strongly pressurizes aggregation downwards by minimizing the amount of strongly aggregating sequences but also by selectively capping strongly aggregating hydrophobic protein sequences with arginine, lysine and proline. These residues are strongly favoured at these positions as they function as gatekeepers that are most efficient at opposing aggregation. Finally, we demonstrate that the substrate specificity of different unrelated chaperone families is geared by these gatekeepers. Chaperones face the difficulty of having to combine substrate affinity for a broad range of hydrophobic sequences and selectivity for those hydrophobic sequences that aggregate most strongly. We show that chaperones achieve these requirements by preferentially binding hydrophobic sequences that are capped by positively charged gatekeeper residues. In other words, targeting evolutionarily selected gatekeepers allows chaperones to prioritize substrate recognition according to aggregation propensity.     

Crystal Structure of the F27G AIM2 PYD Mutant and Similarities of Its Self-Association to DED/DED Interactions

Absent in melanoma 2 (AIM2) is a cytoplasmic double-stranded DNA sensor involved in innate immunity. It uses its C-terminal HIN domain for recognizing double-stranded DNA and its N-terminal pyrin domain (PYD) for eliciting downstream effects through recruitment and activation of apoptosis-associated Speck-like protein containing CARD (ASC). ASC in turn recruits caspase-1 and/or caspase-11 to form the AIM2 inflammasome. The activated caspases process proinflammatory cytokines IL-1β and IL-18 and induce the inflammatory form of cell death pyroptosis. Here we show that AIM PYD (AIM2^PYD) self-oligomerizes. We notice significant sequence homology of AIM2^PYD with the hydrophobic patches of death effector domain (DED)-containing proteins and confirm that mutations on these residues disrupt AIM2^PYD self-association. The crystal structure at 1.82 Å resolution of such a mutant, F27G of AIM2^PYD, shows the canonical six-helix (H1–H6) bundle fold in the death domain superfamily. In contrast to the wild-type AIM2^PYD structure crystallized in fusion with the large maltose-binding protein tag, the H2–H3 region of the AIM2^PYD F27G is well defined with low B-factors. Structural analysis shows that the conserved hydrophobic patches engage in a type I interaction that has been observed in DED/DED and other death domain superfamily interactions. While previous mutagenesis studies of PYDs point to the involvement of charged interactions, our results reveal the importance of hydrophobic interactions in the same interfaces. These centrally localized hydrophobic residues within fairly charged patches may form the hot spots in AIM2^PYD self-association and may represent a common mode of PYD/PYD interactions in general.     

The cellular modifier MOAG‐4/SERF drives amyloid formation through charge complementation

While aggregation‐prone proteins are known to accelerate aging and cause age‐related diseases, the cellular mechanisms that drive their cytotoxicity remain unresolved. The orthologous proteins MOAG‐4, SERF1A, and SERF2 have recently been identified as cellular modifiers of such proteotoxicity. Using a peptide array screening approach on human amyloidogenic proteins, we found that SERF2 interacted with protein segments enriched in negatively charged and hydrophobic, aromatic amino acids. The absence of such segments, or the neutralization of the positive charge in SERF2, prevented these interactions and abolished the amyloid‐promoting activity of SERF2. In protein aggregation models in the nematode worm Caenorhabditis elegans, protein aggregation and toxicity were suppressed by mutating the endogenous locus of MOAG‐4 to neutralize charge. Our data indicate that MOAG‐4 and SERF2 drive protein aggregation and toxicity by interactions with negatively charged segments in aggregation‐prone proteins. Such charge interactions might accelerate primary nucleation of amyloid by initiating structural changes and by decreasing colloidal stability. Our study points at charge interactions between cellular modifiers and amyloidogenic proteins as potential targets for interventions to reduce age‐related protein toxicity.     

Dual behavior of sodium dodecyl sulfate as enhancer or suppressor of insulin aggregation and chaperone-like activity of camel αS1-casein

Sodium dodecyl sulfate (SDS) at low concentrations considerably enhanced insulin aggregation and reduced the chaperone-like activity of purified camel αS₁-casein (αS₁-CN). These observed changes were the result of repulsive electrostatic interactions between both negative charged head groups of SDS and αS₁-CN, and the net negative charge of insulin molecules, resulting in the greater exposure of hydrophobic patches of insulin and its enhanced aggregation. In contrast, enhanced hydrophobic interactions were primarily responsible for the conformational changes observed in insulin and αS₁-CN at high SDS concentrations, resulting in increased binding of SDS and αS₁-CN to insulin and its reduced aggregation.     

Balance of Electrostatic and Hydrophobic Interactions in the Lysis of Model Membranes by E. coliα-Haemolysin

The relative weight of electrostatic interactions and hydrophobic forces in the process of membrane disruption caused by E. coliα-haemolysin (HlyA) has been studied with a purified protein preparation and a model system consisting of large unilamellar vesicles loaded with water-soluble fluorescent probes. Vesicles were prepared in buffers of different ionic strengths, or pHs, and the net surface charge of the bilayers was also modified by addition of negatively (e.g., phosphatidylinositol) or positively (e.g., stearylamine) charged lipids. The results can be interpreted in terms of a multiple equilibrium in which α-haemolysin may exist: aggregated HlyA ⇄ monomeric HlyA ⇄ membrane-bound HlyA. In these equilibria both electrostatic and hydrophobic forces are significant. Electrostatic forces become substantial under certain circumstances, e.g., membrane binding when bilayer and protein have opposite electric charges. Protein adsorption to the bilayer is more sensitive to electrostatic forces than membrane disruption itself. In the latter case, the irreversible nature of protein insertion may overcome electrostatic repulsions. Also of interest is the complex effect of pH on the degree of aggregation of an amphipathic toxin like α-haemolysin, since pH changes are not only influencing the net protein charge but may also be inducing protein conformational transitions shown by changes in the protein intrinsic fluorescence and in its susceptibility to protease digestion, that appear to regulate the presence of hydrophobic patches at the surface of the molecule, thus modifying the ability of the toxin to either aggregate or become inserted in membranes. Received: 29 October 1996/Revised: 4 February 1997     

Does structural and chemical divergence play a role in precluding undesirable protein interactions?

To understand the evolutionary forces establishing, maintaining, breaking, or precluding protein-protein interactions, a comprehensive data set of protein complexes has been analyzed to examine the overlap between protein interfaces and the most conserved or divergent protein surface areas. The most divergent areas tend to be found predominantly away from protein interfaces, although when found at interfaces, they are associated with specific lack of cross-reactivity between close homologues, like in antibody-antigen complexes. Moreover, the amino acid composition of highly variable regions is significantly different from any other protein surfaces. The variable regions present higher structural plasticity as a result of insertions and deletions, and favor charged over hydrophobic residues, a known strategy to minimize aggregation. This suggests that (1) a rapid rate of mutations at these regions might be continuously altering their properties, making difficult the coadaptation, in shape and chemical complementarity, to potential interacting partners; and (2) the existence of some form of selective pressure for variable areas away from interfaces to accumulate charged residues, perhaps as an evolutionary mechanism to increase solubility and minimize undesirable interactions within the crowded cellular environment. Finally, these results are placed into the context of the aberrant oligomerization of sickle-cell anemia hemoglobin and prion proteins.     

Human pancreatitis-associated protein forms fibrillar aggregates with a native-like conformation

Human pancreatitis-associated protein was identified in pathognomonic lesions of Alzheimer disease, a disease characterized by the presence of filamentous protein aggregates. Here, we showed that at physiological pH, human pancreatitis-associated protein forms non-Congo Red-binding, proteinase K-resistant fibrillar aggregates with diameters from 6 up to as large as 68 nm. Interestingly, circular dichroism and Fourier transform infrared spectra showed that, unlike typical amyloid fibrils, which have a cross-beta-sheet structure, these aggregates have a very similar secondary structure to that of the native protein, which is composed of two alpha-helices and eight beta-strands, as determined by NMR techniques. Surface structure analysis showed that the positively charged and negatively charged residues were clustered on opposite sides, and strong electrostatic interactions between molecules were therefore very likely, which was confirmed by cross-linking experiments. In addition, several hydrophobic residues were found to constitute a continuous hydrophobic surface. These results and protein aggregation prediction using the TANGO algorithm led us to synthesize peptide Thr(84) to Ser(116), which, very interestingly, was found to form amyloid-like fibrils with a cross-beta structure. Thus, our data suggested that human pancreatitis-associated protein fibrillization is initiated by protein aggregation primarily because of electrostatic interactions, and the loop from residues 84 to 116 may play an important role in the formation of fibrillar aggregates with a native-like conformation.     

Evaluation of preferred binding regions on ubiquitin and IgG1 FC for interacting with multimodal cation exchange resins using DEPC labeling/mass spectrometry

There is significant interest in identifying the preferred binding domains of biological products to various chromatographic materials. In this work, we develop a biophysical technique that uses diethyl pyrocarbonate (DEPC) based covalent labeling in concert with enzymatic digestion and mass spectrometry to identify the binding patches for proteins bound to commercially available multimodal (MM) cation exchange chromatography resins. The technique compares the changes in covalent labeling of the protein in solution and in the bound state and uses the differences in this labeling to identify residues that are sterically shielded upon resin binding and, therefore, potentially involved in the resin binding process. Importantly, this approach enables the labeling of many amino acids and can be carried out over a pH range of 5.5–7.5, thus enabling the protein surface mapping at conditions of interest in MM cation exchange systems. The protocol is first developed using the model protein ubiquitin and the results indicate that lysine residues located on the front face of the protein show dramatic changes in DEPC labeling while residues present on other regions have minimal or no reductions. This indicates that the front face of ubiquitin is likely involved in resin binding. In addition, surface property maps indicate that the hypothesized front face binding region consists of overlapping positively charged and hydrophobic patches. The technique is then employed with an IgG1 F_C and the results indicate that residues on the C_H2–C_H3 interface and the hinge are significantly sterically shielded upon binding to the resin. Further, these regions are again associated with significant overlap of positively charged and hydrophobic patches. On the other hand, while, residues on the C_H2 and the front face of the IgG1 F_C also exhibited some changes in DEPC labeling upon binding, these regions have less distinct charged and hydrophobic patches. Importantly, the hypothesized binding patches identified for both ubiquitin and F_C using this approach are shown to be consistent with previously reported NMR studies. In contrast to NMR, this new approach enables the identification of preferred binding regions without the need for isotopically labeled proteins or chemical shift assignments. The technique developed in this work sets the stage for the evaluation of the binding domains of a wide range of biological products to chromatographic surfaces, with important implications for designing biomolecules with improved biomanufacturability properties.     

A method for detecting hydrophobic patches on protein surfaces

A method for the detection of hydrophobic patches on the surfaces of protein tertiary structures is presented. It delineates explicit contiguous pieces of surface of arbitrary size and shape that consist solely of carbon and sulphur atoms using a dot representation of the solvent-accessible surface. The technique is also useful in detecting surface segments with other characteristics, such as polar patches. Its potential as a tool in the study of protein-protein interactions and substrate recognition is demonstrated by applying the method to myoglobin, Leu/Ile/Val-binding protein, lipase, lysozyme, azurin, triose phosphate isomerase, carbonic anhydrase, and phosphoglycerate kinase. Only the largest patches, having sizes exceeding random expectation, are deemed meaningful. In addition to well-known hydrophobic patches on these proteins, a number of other patches are found, and their significance is discussed. The method is simple, fast, and robust. The program text is obtainable by anonymous ftp. © 1996 Wiley-Liss, Inc.     

Mechanism of the Chaperone-like and Antichaperone Activities of Amyloid Fibrils of Peptides from αA-Crystallin

The amyloid fibril of a fragment of the substrate binding site of αA-crystallin (αAC(71-88)) exhibited chaperone-like activity by suppressing the aggregation of alcohol dehydrogenase (ADH) and luciferase. By contrast, the amyloid fibril of the cytotoxic fragment of amyloid β protein (Aβ(25-35)) facilitated the aggregation of the same proteins. We have determined the zeta potential of the amyloid fibril by measuring their electrophoretic mobility to study the effects of the surface charge on the modulation of protein aggregation. The αAC(71-88) amyloid possesses a large negative zeta potential value which is unaffected by the binding of the negatively charged ADH, indicating that the αAC(71-88) amyloid is stable as a colloidal dispersion. By contrast, the Aβ(25-35) amyloid possesses a low zeta potential value, which was significantly reduced with the binding of the negatively charged ADH. The canceling of the surface charge of the amyloid fibril upon substrate binding reduces colloidal stability and thereby facilitates protein aggregation. These results indicate that one of the key factors determining whether amyloid fibrils display chaperone-like or antichaperone activity is their electrostatic interaction with the substrate. The surface of the αAC(71-88) amyloid comprises a hydrophobic environment, and the chaperone-like activity of the αAC(71-88) amyloid is best explained by the reversible substrate binding driven by hydrophobic interactions. On the basis of these findings, we designed variants of amyloid fibrils of αAC(71-88) that prevent protein aggregation associated with neurodegenerative disorders.     

The role of hydrophobic and negatively charged surface patches of lipid-free apolipoprotein A-I in lipid binding and ABCA1-mediated cholesterol efflux

Recent models of lipid-free apolipoprotein A-I, including a cross-link/homology model and an X-ray crystal structure have identified two potential functionally relevant “patches” on the protein surface. The first is a hydrophobic surface patch composed of leucine residues 42, 44, 46, and 47 and the second a negatively charged patch composed of glutamic acid residues 179, 191, and 198. To determine if these domains play a functional role, these surface patches were disrupted by site-directed mutagenesis and the bacterially expressed mutants were compared with respect to their ability to bind lipid and stimulate ABCA1-mediated cholesterol efflux. It was found that neither patch plays a significant functional role in the ability of apoA-I to accept cholesterol in an ABCA1-dependent manner, but that the hydrophobic patch did affect the ability of apoA-I to clear DMPC liposomes. Interestingly, contrary to previous predictions, disruption of the hydrophobic surface patch enhanced the lipid binding ability of apoA-I. The hydrophobic surface patch may be important to the structural stability of lipid-free apoA-I or may be a necessary permissive structural element for lipid binding.     

Simulations of reversible protein aggregate and crystal structure.

We simulated the structure of reversible protein aggregates as a function of protein surface characteristics, protein-protein interaction energies, and the entropic penalty accompanying the immobilization of protein in a solid phase. These simulations represent an extension of our previous work on kinetically irreversible protein aggregate structure and are based on an explicit accounting of the specific protein-protein interactions that occur within reversible aggregates and crystals. We considered protein monomers with a mixture of hydrophobic and hydrophilic surface regions suspended in a polar solvent; the energetic driving force for aggregation is provided by the burial of solvent-exposed hydrophobic surface area. We analyzed the physical properties of the generated aggregates, including density, protein-protein contact distributions, solvent accessible surface area, porosity, and order, and compared our results with the protein crystallization literature as well as with the kinetically irreversible case. The physical properties of reversible aggregates were consonant with those observed for the irreversible aggregates, although in general, reversible aggregates were more stable energetically and were more crystal-like in their order content than their irreversible counterparts. The reversible aggregates were less dense than the irreversible aggregates, indicating that the increased energetic stability is derived primarily from the optimality rather than the density of the packing in the solid phase. The extent of hydrophobic protein-protein contacts and solvent-exposed surface area within the aggregate phase depended on the aggregation pathway: reversible aggregates tended to have a greater proportion of hydrophobic-hydrophobic contacts and a smaller fraction of hydrophobic solvent-exposed surface area. Furthermore, the arrangement of hydrophobic patches on the protein surface played a major role in the distribution of protein contacts and solvent content. This was readily reflected in the order of the aggregates: the greater the contiguity of the hydrophobic patches on the monomer surface, the less ordered the aggregates became, despite the opportunities for rearrangement offered by a reversible pathway. These simulations have enhanced our understanding of the impact of protein structural motifs on aggregate properties and on the demarcation between aggregation and crystallization.     

Structural insights into the aggregation behavior of Murraya koenigii miraculin‐like protein below pH 7.5

Murraya koenigii miraculin‐like protein (MKMLP) gradually precipitates below pH 7.5. Here, we explore the basis for this aggregation by identifying the aggregation‐prone regions via comparative analysis of crystal structures acquired at several pH values. The prediction of aggregation‐prone regions showed the presence of four short peptides either in beta sheets or loops on surface of the protein. These peptides were distributed in two patches far apart on the surface. Comparison of crystal structures of MKMLP, determined at 2.2 Å resolution in pH 7.0 and 4.6 in the present study and determined at 2.9 Å in pH 8.0 in an earlier reported study, reveal subtle conformational differences resulting in gradual exposure of aggregation‐prone regions. As the pH is lowered, there are alterations in ionic interactions within the protein interactions of the chain with water molecules and exposure of hydrophobic residues. The analysis of symmetry‐related molecular interfaces involving one patch revealed shortening of nonpolar intermolecular contacts as the pH decreased. In particular, a decrease in the intermolecular distance between Trp103 of the aggregation‐prone peptide WFITTG (103–108) unique to MLPs was observed. These results demonstrated that aggregation occurs due to the cumulative effect of the changes in interactions in two aggregation‐prone defined regions. Proteins 2014; 82:830–840. © 2013 Wiley Periodicals, Inc.     

Aggregatation,fusion and aqueous content release from liposomes induced by lysozyme derivatives: Effect on the lytic activity

Chemically modified lysozymes, namely: N-succinyl lysozyme, glycine methyl ester of N-succinyl lysozyme and oxoindole lysozyme have been prepared. Aggregation, fusion and leakage of phospholipid vesicles induced by these derivatives have been studied in comparison with the effect of the unmodified protein. The experiments were carried out with negatively charges 9PC/ PA, 9:1) and uncharged (PC and PC/DOPE/Chol (10:5:5)) lipid vesicles of different packing. Fusion and aggregation of negatively charged phospholipid vesicles is induced by proteins positively charged at pH 7·0 involving electrostatic interactions. a similar pattern on fusion and aggregation of the least stably packed lipid vesicles points also to hydrophobic forces playing a role in the lipid-protein interaction. A conformational change of the protein involved increasing β-turns, loops and unordered structure at the expenses of β-sheet without affecting λhelix content. The conformational effect is necessary to provoke the effects studied, since one of the derivatives (N-succinyl lysozyme) neither changes conformation nor causes aggregation and fusion of vesicles. However, there is no relationship between lysozyme activity and fusion or aggregation of lipid vesicles that catalytic and fusogenci sites of, indicating lysozyme are topographically different     

Reversible and irreversible modifications ofβ-lactoglobulin upon exposure to heat

Modifications in the exposure to the solvent of hydrophobic residues, changes in their organization into surface hydrophobic patches, and alterations in the dimerization equilibrium ofβ-lactoglobulin upon thermal treatment at neutralpH were studied. Exposure of tryptophan residues was temperature dependent and was essentially completed on the time scale of seconds. Reorganization of generic hydrophobic protein patches on the protein surface was monitored through binding of 1,8-anilinonaphthalenesulfonate, and was much slower than changes in tryptophan exposure. Different phases in surface hydrophobicity changes were related to the swelling and the subsequent collapse of the protein, which formed a metastable swollen intermediate. Heat treatment ofβ-lactoglobulin also resulted in the formation of soluble oligomeric aggregates. The aggregation process was studied as a function of temperature, demonstrating that (i) dimer dissociation was a necessary step in a sequential polymerization mechanism and (ii) cohesion of hydrophobic patches was the major driving force for aggregation.     

Implementation of an experimental and computational tool set to study protein-mAb interactions

This work focused on the development of a combined experimental and computational tool set to study protein-mAb interactions. A model protein library was first screened using cross interaction chromatography to identify proteins with the strongest retention. Fluorescence polarization was then employed to study the interactions and thermodynamics of the selected proteins—lactoferrin, pyruvate kinase, and ribonuclease B with the mAb. Binding affinities of lactoferrin and pyruvate kinase to the mAb were seen to be relatively salt insensitive in the range examined. Further, a strong entropic contribution was observed, suggesting the importance of hydrophobic interactions. On the other hand, ribonuclease B-mAb binding was seen to be enthalpically driven and salt sensitive, indicating the importance of electrostatic interactions. Protein–protein docking was then carried out and the results identified the CDR region on the mAb as an important binding site for all three proteins. The binding interfaces identified for the mAb-lactoferrin and mAb-pyruvate kinase systems were found to contain complementary hydrophobic and oppositely charged clusters on the interacting regions which were indicative of both hydrophobic and electrostatic interactions. On the other hand, the binding site on ribonuclease B was predominantly positively charged with minimal hydrophobicity. This resulted in an alignment with negatively charged clusters on the mAb, supporting the contention that these interactions were primarily electrostatic in nature. Importantly, these computational results were found to be consistent with the fluorescence polarization data and this combined approach may have utility in examining mAb-HCP interactions which can often complicate the downstream processing of biologics. © 2019 American Institute of Chemical Engineers