Structure of antibody-neutralized murine norovirus and unexpected differences from viruslike particles

Noroviruses (family Caliciviridae) are the major cause of epidemic nonbacterial gastroenteritis in humans, but the mechanism of antibody neutralization is unknown and no structure of an infectious virion has been reported. Murine norovirus (MNV) is the only norovirus that can be grown in tissue culture, studied in an animal model, and reverse engineered via an infectious clone and to which neutralizing antibodies have been isolated. Presented here are the cryoelectron microscopy structures of an MNV virion and the virion in complex with neutralizing Fab fragments. The most striking differences between MNV and previous calicivirus structures are that the protruding domain is lifted off the shell domain by ~16Å and rotated ~40° in a clockwise fashion and forms new interactions at the P1 base that create a cagelike structure engulfing the shell domains. Neutralizing Fab fragments cover the outer surface of each copy of the capsid protein P2 domains without causing any apparent conformational changes. These unique features of MNV suggest that at least some caliciviruses undergo a capsid maturation process akin to that observed with other plant and bacterial viruses.     

Atomic Model of Rabbit Hemorrhagic Disease Virus by Cryo-Electron Microscopy and Crystallography

Rabbit hemorrhagic disease, first described in China in 1984, causes hemorrhagic necrosis of the liver. Its etiological agent, rabbit hemorrhagic disease virus (RHDV), belongs to the Lagovirus genus in the family Caliciviridae. The detailed molecular structure of any lagovirus capsid has yet to be determined. Here, we report a cryo-electron microscopic (cryoEM) reconstruction of wild-type RHDV at 6.5 Å resolution and the crystal structures of the shell (S) and protruding (P) domains of its major capsid protein, VP60, each at 2.0 Å resolution. From these data we built a complete atomic model of the RHDV capsid. VP60 has a conserved S domain and a specific P2 sub-domain that differs from those found in other caliciviruses. As seen in the shell portion of the RHDV cryoEM map, which was resolved to ∼5.5 Å, the N-terminal arm domain of VP60 folds back onto its cognate S domain. Sequence alignments of VP60 from six groups of RHDV isolates revealed seven regions of high variation that could be mapped onto the surface of the P2 sub-domain and suggested three putative pockets might be responsible for binding to histo-blood group antigens. A flexible loop in one of these regions was shown to interact with rabbit tissue cells and contains an important epitope for anti-RHDV antibody production. Our study provides a reliable, pseudo-atomic model of a Lagovirus and suggests a new candidate for an efficient vaccine that can be used to protect rabbits from RHDV infection.     

DNA Binding and Condensation Properties of the Herpes Simplex Virus Type 1 Triplex Protein VP19C

Herpesvirus capsids are regular icosahedrons with a diameter of a 125 nm and are made up of 162 capsomeres arranged on a T = 16 lattice. The capsomeres (VP5) interact with the triplex structure, which is a unique structural feature of herpesvirus capsid shells. The triplex is a heterotrimeric complex; one molecule of VP19C and two of VP23 form a three-pronged structure that acts to stabilize the capsid shell through interactions with adjacent capsomeres. VP19C interacts with VP23 and with the major capsid protein VP5 and is required for the nuclear localization of VP23. Mutation of VP19C results in the abrogation of capsid shell synthesis. Analysis of the sequence of VP19C showed the N-terminus of VP19C is very basic and glycine rich. It was hypothesized that this domain could potentially bind to DNA. In this study an electrophoretic mobility shift assay (EMSA) and a DNA condensation assay were performed to demonstrate that VP19C can bind DNA. Purified VP19C was able to bind to both a DNA fragment of HSV-1 origin as well as a bacterial plasmid sequence indicating that this activity is non-specific. Ultra-structural imaging of the nucleo-protein complexes revealed that VP19C condensed the DNA and forms toroidal DNA structures. Both the DNA binding and condensing properties of VP19C were mapped to the N-terminal 72 amino acids of the protein. Mutational studies revealed that the positively charged arginine residues in this N-terminal domain are required for this binding. This DNA binding activity, which resides in a non-conserved region of the protein could be required for stabilization of HSV-1 DNA association in the capsid shell.     

Inter- and intragenus structural variations in caliciviruses and their functional implications

The family Caliciviridae is divided into four genera and consists of single-stranded RNA viruses with hosts ranging from humans to a wide variety of animals. Human caliciviruses are the major cause of outbreaks of acute nonbacterial gastroenteritis, whereas animal caliciviruses cause various host-dependent illnesses with a documented potential for zoonoses. To investigate inter- and intragenus structural variations and to provide a better understanding of the structural basis of host specificity and strain diversity, we performed structural studies of the recombinant capsid of Grimsby virus, the recombinant capsid of Parkville virus, and San Miguel sea lion virus serotype 4 (SMSV4), which are representative of the genera Norovirus (genogroup 2), Sapovirus, and Vesivirus, respectively. A comparative analysis of these structures was performed with that of the recombinant capsid of Norwalk virus, a prototype member of Norovirus genogroup 1. Although these capsids share a common architectural framework of 90 dimers of the capsid protein arranged on a T=3 icosahedral lattice with a modular domain organization of the subunit consisting of a shell (S) domain and a protrusion (P) domain, they exhibit distinct differences. The distally located P2 subdomain of P shows the most prominent differences both in shape and in size, in accordance with the observed sequence variability. Another major difference is in the relative orientation between the S and P domains, particularly between those of noroviruses and other caliciviruses. Despite being a human pathogen, the Parkville virus capsid shows more structural similarity to SMSV4, an animal calicivirus, suggesting a closer relationship between sapoviruses and animal caliciviruses. These comparative structural studies of caliciviruses provide a functional rationale for the unique modular domain organization of the capsid protein with an embedded flexibility reminiscent of an antibody structure. The highly conserved S domain functions to provide an icosahedral scaffold; the hypervariable P2 subdomain may function as a replaceable module to confer host specificity and strain diversity; and the P1 subdomain, located between S and P2, provides additional fine-tuning to position the P2 subdomain.     

Structure of Double-Shelled Rice Dwarf Virus

Rice dwarf virus (RDV), a member of the Reoviridae family, is a double-stranded RNA virus. Infection of rice plants with RDV reduces crop production significantly and can pose a major economic threat to Southeast Asia. A 25-Å three-dimensional structure of the 700-Å-diameter RDV capsid has been determined by 400-kV electron cryomicroscopy and computer reconstruction. The structure revealed two distinctive icosahedral shells: a T=13l outer icosahedral shell composed of 260 trimeric clusters of P8 (46 kDa) and an inner T=1 icosahedral shell of 60 dimers of P3 (114 kDa). Sequence and structural comparisons were made between the RDV outer shell trimer and the two crystal conformations (REF and HEX) of the VP7 trimer of bluetongue virus, an animal analog of RDV. The low-resolution structural match of the RDV outer shell trimer to the HEX conformation of VP7 trimer has led to the proposal that P8 consists of an upper domain of β-sandwich motif and a lower domain of α helices. The less well fit REF conformation of VP7 to the RDV trimer may be due to the differences between VP7 and P8 in the sequence of the hinge region that connects the two domains. The additional mass density and the absence of a known signaling peptide on the surface of the RDV outer shell trimer may be responsible for the different interactions between plants and animal reoviruses.     

Role and mechanism of the maturation cleavage of VP0 in poliovirus assembly: structure of the empty capsid assembly intermediate at 2.9 A resolution.

The crystal structure of the P1/Mahoney poliovirus empty capsid has been determined at 2.9 A resolution. The empty capsids differ from mature virions in that they lack the viral RNA and have yet to undergo a stabilizing maturation cleavage of VP0 to yield the mature capsid proteins VP4 and VP2. The outer surface and the bulk of the protein shell are very similar to those of the mature virion. The major differences between the 2 structures are focused in a network formed by the N-terminal extensions of the capsid proteins on the inner surface of the shell. In the empty capsids, the entire N-terminal extension of VP1, as well as portions corresponding to VP4 and the N-terminal extension of VP2, are disordered, and many stabilizing interactions that are present in the mature virion are missing. In the empty capsid, the VP0 scissile bond is located some 20 A away from the positions in the mature virion of the termini generated by VP0 cleavage. The scissile bond is located on the rim of a trefoil-shaped depression in the inner surface of the shell that is highly reminiscent of an RNA binding site in bean pod mottle virus. The structure suggests plausible (and ultimately testable) models for the initiation of encapsidation, for the RNA-dependent autocatalytic cleavage of VP0, and for the role of the cleavage in establishing the ordered N-terminal network and in generating stable virions.     

Three-Dimensional Structure of the Enveloped Bacteriophage Φ12: An Incomplete T?=?13 Lattice Is Superposed on an Enclosed T?=?1 Shell

Background

Bacteriophage φ12 is a member of the Cystoviridae, a unique group of lipid containing membrane enveloped bacteriophages that infect the bacterial plant pathogen Pseudomonas syringae pv. phaseolicola. The genomes of the virus species contain three double-stranded (dsRNA) segments, and the virus capsid itself is organized in multiple protein shells. The segmented dsRNA genome, the multi-layered arrangement of the capsid and the overall viral replication scheme make the Cystoviridae similar to the Reoviridae.

Methodology/Principal Findings

We present structural studies of cystovirus φ12 obtained using cryo-electron microscopy and image processing techniques. We have collected images of isolated φ12 virions and generated reconstructions of both the entire particles and the polymerase complex (PC). We find that in the nucleocapsid (NC), the φ12 P8 protein is organized on an incomplete T = 13 icosahedral lattice where the symmetry axes of the T = 13 layer and the enclosed T = 1 layer of the PC superpose. This is the same general protein-component organization found in φ6 NC''s but the detailed structure of the entire φ12 P8 layer is distinct from that found in the best classified cystovirus species φ6. In the reconstruction of the NC, the P8 layer includes protein density surrounding the hexamers of P4 that sit at the 5-fold vertices of the icosahedral lattice. We believe these novel features correspond to dimers of protein P7.

Conclusions/Significance

In conclusion, we have determined that the φ12 NC surface is composed of an incomplete T = 13 P8 layer forming a net-like configuration. The significance of this finding in regard to cystovirus assembly is that vacancies in the lattice could have the potential to accommodate additional viral proteins that are required for RNA packaging and synthesis.     

Three-dimensional structure of baculovirus-expressed Norwalk virus capsids.

The three-dimensional structure of the baculovirus-expressed Norwalk virus capsid has been determined to a resolution of 2.2 nm using electron cryomicroscopy and computer image processing techniques. The empty capsid, 38.0 nm in diameter, exhibits T = 3 icosahedral symmetry and is composed of 90 dimers of the capsid protein. The striking features of the capsid structure are arch-like capsomeres, at the local and strict 2-fold axes, formed by dimers of the capsid protein and large hollows at the icosahedral 5- and 3-fold axes. Despite its distinctive architecture, the Norwalk virus capsid has several similarities with the structures of T = 3 single-stranded RNA (ssRNA) viruses. The structure of the protein subunit appears to be modular with three distinct domains: the distal globular domain (P2) that appears bilobed, a central stem domain (P1), and a lower shell domain (S). The distal domains of the 2-fold related subunits interact with each other to form the top of the arch. The lower domains of the adjacent subunits associate tightly to form a continuous shell between the radii of 11.0 and 15.0 nm. No significant mass density is observed below the radius of 11.0 mm. It is suspected that the hinge peptide in the adjoining region between the central domain and the shell domain may facilitate the subunits adapting to various quasi-equivalent environments. Architectural similarities between the Norwalk virus capsid and the other ssRNA viruses have suggested a possible domain organization along the primary sequence of the Norwalk virus capsid protein. It is suggested that the N-terminal 250 residues constitute the lower shell domain (S) with an eight-strand beta-barrel structure and that the C-terminal residues beyond 250 constitute the protruding (P1+P2) domains. A lack of an N-terminal basic region and the ability of the Norwalk virus capsid protein to form empty T = 3 shells suggest that the assembly pathway and the RNA packing mechanisms may be different from those proposed for tomato bushy stunt virus and southern bean mosaic virus but similar to that in tymoviruses and comoviruses.     

High-Resolution Cryo-Electron Microscopy Structures of Murine Norovirus 1 and Rabbit Hemorrhagic Disease Virus Reveal Marked Flexibility in the Receptor Binding Domains

Our previous structural studies on intact, infectious murine norovirus 1 (MNV-1) virions demonstrated that the receptor binding protruding (P) domains are lifted off the inner shell of the virus. Here, the three-dimensional (3D) reconstructions of recombinant rabbit hemorrhagic disease virus (rRHDV) virus-like particles (VLPs) and intact MNV-1 were determined to ∼8-Å resolution. rRHDV also has a raised P domain, and therefore, this conformation is independent of infectivity and genus. The atomic structure of the MNV-1 P domain was used to interpret the MNV-1 reconstruction. Connections between the P and shell domains and between the floating P domains were modeled. This observed P-domain flexibility likely facilitates virus-host receptor interactions.Murine norovirus 1 (MNV-1) (3, 14, 15) and rabbit hemorrhagic disease virus (RHDV) are members of the genera Norovirus and Lagovirus of the family Caliciviridae that offer a comparison to recombinant human norovirus (rNV) virus-like particles (VLPs) for assessing the structures and roles of domains within the capsid proteins of this family of viruses. Calicivirus particles contain 180 copies of the 56- to 76-kDa major capsid protein (Orf2), which is comprised of the internal/buried N terminus (N), shell (S), and protruding (P) domains (9, 10). The S domain, an eight-stranded β-barrel, forms an ∼300-Å contiguous shell around the RNA genome. A flexible hinge connects the shell to a “protruding” (P) domain at the C-terminal half of the capsid protein, which can be further divided into a globular head region (P2) and a stem region (P1) that connects the shell domain to P2. The accompanying article (13) describes the determination of the structure of the P domain of MNV-1 to a resolution of 2.0 Å.We recently determined the cryo-transmission electron microscopy (TEM) structure of MNV-1 to ∼12-Å resolution (4) and found that, compared to rNV VLPs (10) and San Miguel sea lion virus (SMSV) (1, 2), the protruding domains are rotated by ∼40° in a clockwise fashion and lifted up by ∼16 Å. To better understand the unusual conformation of MNV-1 and whether it is unique to this particular member of the calicivirus family, the ∼8-Å cryo-TEM structures of infectious MNV-1 and the VLPs of RHDV were determined.MNV-1 was produced as previously described (4). Three liters of cell culture yielded 0.5 to 1.0 mg of purified virus with a particle/PFU ratio of less than 100. Baculovirus expression and purification of recombinant RHDV (rRHDV) VLPs were performed as previously described (8). Cryo-electron microscopy (EM) data were collected at the National Resource for Automated Molecular Microscopy (NRAMM) facility in San Diego, CA (4). Images were collected at a nominal magnification of ×50,000 at a pixel size of 0.1547 nm at the specimen level using Leginon software (12) and processed with Appion software (5). The contrast transfer function for each set of particles from each image was estimated and corrected using ACE2 (a variation of ACE [7]). Particle images were automatically selected (11). The final stacks of particle images contained 20,425 MNV virions and 7,856 rRHDV VLPs, and EMAN 3D (6) was used for the reconstructions. Resolutions were estimated by Fourier shell correlations (FSC) of the three-dimensional (3D) reconstructions and application of a cutoff of 0.5. An amplitude correction of the final electron density was performed using GroEL small-angle X-ray scattering (SAXS) data.3D reconstructions of MNV-1 and rRHDV were calculated to resolutions of 8 Å and 8.1 Å, respectively (Fig. ​(Fig.1).1). The P domains of rNV VLPs rest directly on top of the shell domain (10) (Fig. ​(Fig.1A).1A). In contrast, the P domains of MNV-1 are lifted and rotated above the shell of the capsid (4) (Fig. ​(Fig.1B).1B). At this higher resolution, there was a clear connection between the P1 domain and the shell domain in all three capsid subunits (Fig. ​(Fig.1B,1B, arrow A). Unlike the smooth protruding domains of rNV, MNV-1 has two clear “horns” (arrow B), not dissimilar to those observed for the sapoviruses (1, 2). There also are islands of density in the interior of the shell, directly beneath the 5-fold axes, that may represent ordered regions of RNA.Open in a separate windowFIG. 1.Stereo diagrams (left) and thin sections (right), with radius coloring, of rNV (A), MNV-1 (B), and an rRHDV VLP (C). For rNV, the atomic coordinates (10) were used. In MNV, arrow A indicates the thin connector between the P1 and S domains. Arrow B denotes the horns found at the tips of the P2 domains. Arrow C denotes the large gap between the P1 and S domains in the rRHDV VLP. Arrow D denotes the false connectivity in rRHDV VLPs between the P1 domain and the S domain near the 5-fold axes.As with MNV-1, there is a marked gap between the P and S domains in the rRHDV VLP (Fig. ​(Fig.1C,1C, arrow C). This gap is not as pronounced as in MNV-1 because the P domains are not rotated as in MNV-1. In this electron density map, the A/B dimers appear to be touching the shell domain near the 5-fold axes. This contact difference between the A/B dimers and the C/C dimers could be the reason why the tops of the C/C dimers appear to be markedly disordered compared to the A/B dimers in rRHDV and the C/C dimers in MNV-1.Shown in Fig. ​Fig.22 is the fitting of the atomic structures of the MNV-1 P domain (13) and the rNV S domains into the MNV-1 3D reconstruction electron density. The horns (arrow A, loops A′-B′ and E′-F′) observed at the tips of the P domain match exceedingly well with the electron density. As discussed in the accompanying publication (13), the A′-B′ and E′-F′ loops displayed two discrete conformations, a closed structure, where the two loops were tightly associated, and an open structure, where the loops were splayed apart. The horns of the closed conformation fit better into the reconstruction, as the E′-F′ loop in the open form jutted out of the density at the base of the horns. The unmodified density in the lower panel of Fig. ​Fig.22 shows fine features in the shell domain and a very clear connection between the shell and P1 domains. The connections between the P1 and S domains were of sufficient quality to build a basic backbone model by uncoiling the linker region (arrow B). The P domain in the unfiltered 3D reconstruction was far less ordered than the S domain (Fig. ​(Fig.2).2). This was likely due to movement of the entire P domain with respect to the shell.Open in a separate windowFIG. 2.Fitting of the MNV-1 P domain and the rNV shell domain into the MNV-1 electron density. A, B, and C subunits are represented by blue, green, and red, respectively. The electron density is shown in transparent gray. The top panel is the 8.0-Å-resolution 3D reconstruction modified using a low-pass filter. The bottom panel is the reconstruction without modification. The horns on the tops of the P domains are denoted by arrow A. Arrow B denotes the connection between the S and P domains.Using the structure of rNV VLP P domains for modeling, the rRHDV P domains are lifted off the surface of the shell, but not rotated as with MNV-1. This places the bottom edge of the A subunit P1 domain near the S domain at the 5-fold axes. The P-domain dimers of rNV and rRHDV have a more “arch-like” shape than MNV-1. Unlike in MNV-1, the electron densities of the C/C dimers in rRHDV are far more diffuse than those of the A/B dimers (Fig. ​(Fig.3B)3B) and the connector between the S and P1 domains is not clear. During fitting, the connector region was not as extended as with MNV-1. This may afford greater flexibility, leading to more diffuse electron density.Open in a separate windowFIG. 3.Fitting of the rNV atomic structure into the rRHDV VLP electron density. The upper stereo image shows the 8.1-Å-resolution 3D reconstruction after modification by a low-pass filter. Below is the same reconstruction prior to density modification.When the atomic models for the MNV-1 P domains (13) were placed into the cryo-TEM electron density (Fig. ​(Fig.4),4), the C termini extended deep into the cores of adjacent P domains. Possible connections not accounted for by the P-domain structures were also observed in the electron density between the P domains. A bulge between the P1 and P2 domains in the 3D reconstruction indicated a possible interaction between the C termini and the adjacent P domains. These same interactions were observed in the crystal lattice. This highly mobile C terminus may be a flexible tether between the P domains in the intact virion.Open in a separate windowFIG. 4.Possible carboxyl-terminus interactions between the P domains of MNV-1. (A) Stereo image of MNV-1 calculated to 12-Å resolution with (red) and without (yellow) the last 10 residues of the P domain. (B) The calculated MNV-1 density with the carboxyl terminus removed (yellow) overlaid onto the 3D reconstruction of MNV-1 (blue). Note the strands of difference density that roughly correspond to the C terminus in panel A. (C) The C-terminus interactions observed in the structure of the MNV-1 P domains. Shown in blue and green are ribbon diagrams of an A/B P-domain dimer. In mauve is a surface rendering of the C terminus from a crystallographically related dimer. (D) Surface rendering of the final MNV-1 model with possible interactions between the P domains in MNV-1. The carboxyl termini of the A subunits (blue) interact with the counterclockwise-related B subunits around the 5-fold axes (white arrows). Around the 3-fold (quasi-6-fold) axes, the C subunits interact with the A subunits and the B subunits interact with the C subunits (orange arrows).It is absolutely clear that the hinge region between the S and P domains affords a remarkable degree of flexibility in the P domains that is not genus specific or related to differences between rVLPs and authentic virions. The simplest explanation for the role of this transition is that it gives the P domains flexibility that may be used to optimize interactions with cell receptors during attachment and entry. In this way, the P domains can increase their avidity for the cell surface by being more facile in adapting to the presentation of cellular recognition motifs.     

Structural requirements for the assembly of Norwalk virus-like particles

Norwalk virus (NV) is the prototype strain of a group of human caliciviruses responsible for epidemic outbreaks of acute gastroenteritis. While these viruses do not grow in tissue culture cells or animal models, expression of the capsid protein in insect cells results in the self-assembly of recombinant NV virus-like particles (rNV VLPs) that are morphologically and antigenically similar to native NV. The X-ray structure of the rNV VLPs has revealed that the capsid protein folds into two principal domains: a shell (S) domain and a protruding (P) domain (B. V. V. Prasad, M. E. Hardy, T. Dokland, J. Bella, M. G. Rossmann, and M. K. Estes, Science 286:287-290, 1999). To investigate the structural requirements for the assembly of rNV VLPs, we performed mutational analyses of the capsid protein. We examined the ability of 10 deletion mutants of the capsid protein to assemble into VLPs in insect cell cultures. Deletion of the N-terminal 20 residues, suggested by the X-ray structure to be involved in a switching mechanism during assembly, did not affect the ability of the mutant capsid protein to self-assemble into 38-nm VLPs with a T=3 icosahedral symmetry. Further deletions in the N-terminal region affected particle assembly. Deletions in the C-terminal regions of the P domain, involved in the interactions between the P and S domains, did not block the assembly process, but they affected the size and stability of the particles. Mutants carrying three internal deletion mutations in the P domain, involved in maintaining dimeric interactions, produced significantly larger 45-nm particles, albeit in low yields. The complete removal of the protruding domain resulted in the formation of smooth particles with a diameter that is slightly smaller than the 30-nm diameter expected from the rNV structure. These studies indicate that the shell domain of the NV capsid protein contains everything required to initiate the assembly of the capsid, whereas the entire protruding domain contributes to the increased stability of the capsid by adding intermolecular contacts between the dimeric subunits and may control the size of the capsid.     

Simian virus 40 chromatin interaction with the capsid proteins

It has been established that both in virions and in infected cells, the cellular core histones fold the SV40 DNA into nucleosomes to form the SV40 chromosome or chromatin. We and others have begun to examine how the capsid proteins assemble the SV40 chromatin into virions and to investigate whether these proteins interact with the encapsidated chromatin. To follow the pathway of virus assembly, we have analyzed the nucleoproteins which accumulate in cells infected with the SV40 mutants temperature-sensitive in assembly: tsC, tsBC, and tsB. (The temperature-sensitivity of these mutants result from alterations in the amino acid sequence of the major capsid protein VP1). We have found that mutants belonging to the same class accumulate similar types of nucleoproteins at the nonpermissive temperature (40 degrees C) and thus, share characteristics in common. For example, the tsC mutants accumulate only the 75 S chromatin. Both tsBC and tsB mutants produce in addition to chromatin, nucleoprotein complexes which sediment broadly from 100-160 S and contain all the three capsid proteins VP1, VP2, and VP3. These nucleoproteins can be distinguished morphologically, however. Under the electron microscope, the tsBC 100-160 S nucleoproteins appear as chromatin to which a small cluster of the capsid proteins is attached; the tsB nucleoproteins appear as partially assembled virions. In addition, we find that the 220 S virions are assembled in cells coinfected with tsB and tsC mutants at 40 degrees C, in agreement with genetic analysis. Our observations favor the hypothesis that the VP1 protein contains three discrete domains. We speculate that each domain may play a specific function in SV40 assembly. To gain more insight into VP1-VP1 interactions, we have examined the nucleoproteins which result from treatment of the mature wild-type virions with increasing concentrations of the reducing agent DTT. In the presence of as low a concentration of DTT as 0.1 mM, the virion shell can be penetrated by micrococcal nuclease, which then cleaves the viral DNA. This result indicates that some of the disulfide bonds bridging the VP1 proteins are on the virion surface.     

Mutually-induced Conformational Switching of RNA and Coat Protein Underpins Efficient Assembly of a Viral Capsid

Single-stranded RNA viruses package their genomes into capsids enclosing fixed volumes. We assayed the ability of bacteriophage MS2 coat protein to package large, defined fragments of its genomic, single-stranded RNA. We show that the efficiency of packaging into a T = 3 capsid in vitro is inversely proportional to RNA length, implying that there is a free-energy barrier to be overcome during assembly. All the RNAs examined have greater solution persistence lengths than the internal diameter of the capsid into which they become packaged, suggesting that protein-mediated RNA compaction must occur during assembly. Binding ethidium bromide to one of these RNA fragments, which would be expected to reduce its flexibility, severely inhibited packaging, consistent with this idea. Cryo-EM structures of the capsids assembled in these experiments with the sub-genomic RNAs show a layer of RNA density beneath the coat protein shell but lack density for the inner RNA shell seen in the wild-type virion. The inner layer is restored when full-length virion RNA is used in the assembly reaction, implying that it becomes ordered only when the capsid is filled, presumably because of the effects of steric and/or electrostatic repulsions. The cryo-EM results explain the length dependence of packaging. In addition, they show that for the sub-genomic fragments the strongest ordered RNA density occurs below the coat protein dimers forming the icosahedral 5-fold axes of the capsid. There is little such density beneath the proteins at the 2-fold axes, consistent with our model in which coat protein dimers binding to RNA stem-loops located at sites throughout the genome leads to switching of their preferred conformations, thus regulating the placement of the quasi-conformers needed to build the T = 3 capsid. The data are consistent with mutual chaperoning of both RNA and coat protein conformations, partially explaining the ability of such viruses to assemble so rapidly and accurately.     

Simian Virus 40 Chromatin Interaction with the Capsid Proteins

Abstract

It has been established that both in virions and in infected cells, the cellular core histones fold the SV40 DNA into nucleosomes to form the SV40 chromosome or chromatin. We and others have begun to examine how the capsid proteins assemble the SV40 chromatin into virions and to investigate whether these proteins interact with the encapsidated chromatin. To follow the pathway of virus assembly, we have analyzed the nucleoproteins which accumulate in cells infected with the SV40 mutants temperature-sensitive in assembly: tsC, tsBC, and tsB. (The temperature-sensitivity of these mutants result from alterations in the amino acid sequence of the major capsid protein VP1). We have found that mutants belonging to the same class accumulate similar types of nucleoproteins at the nonpermissive temperature (40°C) and thus, share characteristics in common. For example, the tsC mutants accumulate only the 75 S chromatin. Both tsBC and tsB mutants produce in addition to chromatin, nucleoprotein complexes which sediment broadly from 100–160 S and contain all the three capsid proteins VP1, VP2, and VP3. These nucleoproteins can be distinguished morphologically, however. Under the electron microscope, the tsBC 100–160 S nucleoproteins appear as chromatin to which a small cluster of the capsid proteins is attached; the tsB nucleoproteins appear as partially assembled virions. In addition, we find that the 220 S virions are assembled in cells coinfected with tsB and tsC mutants at 40°C, in agreement with genetic analysis. Our observations favor the hypothesis that the VP1 protein contains three discrete domains. We speculate that each domain may play a specific function in SV40 assembly. To gain more insight into VP1-VP1 interactions, we have examined the nucleoproteins which result from treatment of the mature wild-type virions with increasing concentrations of the reducing agent DTT. In the presence of as low a concentration of DTT as 0.1 mM, the virion shell can be penetrated by micrococcal nuclease, which then cleaves the viral DNA. This result indicates that some of the disulfide bonds bridging the VP1 proteins are on the virion surface.     

Feline Calicivirus Can Tolerate Gross Changes of Its Minor Capsid Protein Expression Levels Induced by Changing Translation Reinitiation Frequency or Use of a Separate VP2-Coding mRNA

Caliciviruses use reinitiation of translation governed by a ‘termination upstream ribosomal binding site’ (TURBS) for expression of their minor capsid protein VP2. Mutation analysis allowed to identify sequences surrounding the translational start/stop site of the feline calicivirus (FCV) that fine tune reinitiation frequency. A selection of these changes was introduced into the infectious FCV cDNA clone to check the influence of altered VP2 levels on virus replication. In addition, full length constructs were established that displayed a conformation, in which VP2 expression occurred under control of a duplicated subgenomic promoter. Viable viruses recovered from such constructs revealed a rather broad range of VP2 expression levels but comparable growth kinetics showing that caliciviruses can tolerate gross changes of the VP2 expression level.     

A Leucine Zipper-Like Domain Is Essential for Dimerization and Encapsidation of Bluetongue Virus Nucleocapsid Protein VP4

The bluetongue virus (BTV) minor protein VP4, with molecular mass of 76 kDa, is one of the seven structural proteins and is located within the inner capsid of the virion. The protein has a putative leucine zipper near the carboxy terminus of the protein. In this study, we have investigated the functional activity of this putative leucine zipper by a number of approaches. The putative leucine zipper region (amino acids [aa] 523 to 551) was expressed initially as a fusion protein by using the pMAL vector of Escherichia coli, which expresses a maltose binding monomeric protein. The expressed fusion protein was purified by affinity chromatography, and its size was determined by gel filtration chromatography. Proteins of two sizes, 51 and 110 kDa, were recovered, one equivalent to the monomeric form and the other equivalent to the dimeric form of the fusion protein. To prove that the VP4-derived sequence was responsible for dimerization of this protein, a mutated fusion protein was created in which a VP4 leucine residue (at aa 537) within the zipper was replaced by a proline residue. Analyses of the mutated protein demonstrated that the single mutation indeed prevented dimerisation of the protein. The dimeric nature of VP4 was further confirmed by using purified full-length BTV-10 VP4 recovered from recombinant baculovirus-expressing BTV-10 VP4-infected insect cells. Using chemical cross-linking and gel filtration chromatography, we documented that the native VP4 indeed exists as a dimer in solution. Subsequently, Leu537 was replaced by either a proline or an alanine residue and the full-length mutated VP4 was expressed in the baculovirus system. By sucrose density gradient centrifugation and gel filtration chromatography, these mutant forms of VP4 were shown to lack the ability to form dimers. The biological significance of the dimeric forms of VP4 was examined by using a functional assay system, in which the encapsidation activity of VP4 into core-like particles (CLPs) was studied (H. LeBlois, T. French, P. P. C. Mertens, J. N. Burroughs, and P. Roy, Virology 189:757–761, 1992). We demonstrated conclusively that dimerization of VP4 was essential for encapsidation by CLPs.     

The last C-terminal residue of VP3, glutamic acid 257, controls capsid assembly of infectious bursal disease virus

Infectious bursal disease virus (IBDV) is a nonenveloped virus with an icosahedral capsid composed of two proteins, VP2 and VP3, that derive from the processing of the polyprotein NH(2)-pVP2-VP4-VP3-COOH. The virion contains VP1, the viral polymerase, which is both free and covalently linked to the two double-stranded RNA (dsRNA) genomic segments. In this study, the virus assembly process was studied further with the baculovirus expression system. While expression of the wild-type polyprotein was not found to be self-sufficient to give rise to virus-like particles (VLPs), deletion or replacement of the five C-terminal residues of VP3 was observed to promote capsid assembly. Indeed, the single deletion of the C-terminal glutamic acid was sufficient to induce VLP formation. Moreover, fusion of various peptides or small proteins (a green fluorescent protein or a truncated form of ovalbumin) at the C terminus of VP3 also promoted capsid assembly, suggesting that assembly required screening of the negative charges at the C terminus of VP3. The fused polypeptides mimicked the effect of VP1, which interacts with VP3 to promote VLP assembly. The C-terminal segment of VP3 was found to contain two functional domains. While the very last five residues of VP3 mainly controlled both assembly and capsid architecture, the five preceding residues constituted the VP1 (and possibly the pVP2/VP2) binding domain. Finally, we showed that capsid formation is associated with VP2 maturation, demonstrating that the protease VP4 is involved in the virus assembly process.     

The cryo-electron microscopy structure of feline calicivirus bound to junctional adhesion molecule A at 9-angstrom resolution reveals receptor-induced flexibility and two distinct conformational changes in the capsid protein VP1

Caliciviridae are small icosahedral positive-sense RNA-containing viruses and include the human noroviruses, a leading cause of infectious acute gastroenteritis and feline calicivirus (FCV), which causes respiratory illness and stomatitis in cats. FCV attachment and entry is mediated by feline junctional adhesion molecule A (fJAM-A), which binds to the outer face of the capsomere, inducing a conformational change in the capsid that may be important for viral uncoating. Here we present the results of our structural investigation of the virus-receptor interaction and ensuing conformational changes. Cryo-electron microscopy and three-dimensional image reconstruction were used to solve the structure of the virus decorated with a soluble fragment of the receptor at subnanometer resolution. In initial reconstructions, the P domains of the capsid protein VP1 and fJAM-A were poorly resolved. Sorting experiments led to improved reconstructions of the FCV-fJAM-A complex both before and after the induced conformational change, as well as in three transition states. These data showed that the P domain becomes flexible following fJAM-A binding, leading to a loss of icosahedral symmetry. Furthermore, two distinct conformational changes were seen; an anticlockwise rotation of up to 15° of the P domain was observed in the AB dimers, while tilting of the P domain away from the icosahedral 2-fold axis was seen in the CC dimers. A list of putative contact residues was calculated by fitting high-resolution coordinates for fJAM-A and VP1 to the reconstructed density maps, highlighting regions in both virus and receptor important for virus attachment and entry.     

Retroviral Capsid Assembly: A Role for the CA Dimer in Initiation

In maturing retroviral virions, CA protein assembles to form a capsid shell that is essential for infectivity. The structure of the two folded domains [N-terminal domain (NTD) and C-terminal domain (CTD)] of CA is highly conserved among various retroviruses, and the capsid assembly pathway, although poorly understood, is thought to be conserved as well. In vitro assembly reactions with purified CA proteins of the Rous sarcoma virus (RSV) were used to define factors that influence the kinetics of capsid assembly and provide insights into underlying mechanisms. CA multimerization was triggered by multivalent anions providing evidence that in vitro assembly is an electrostatically controlled process. In the case of RSV, in vitro assembly was a well-behaved nucleation-driven process that led to the formation of structures with morphologies similar to those found in virions. Isolated RSV dimers, when mixed with monomeric protein, acted as efficient seeds for assembly, eliminating the lag phase characteristic of a monomer-only reaction. This demonstrates for the first time the purification of an intermediate on the assembly pathway. Differences in the intrinsic tryptophan fluorescence of monomeric protein and the assembly-competent dimer fraction suggest the involvement of the NTD in the formation of the functional dimer. Furthermore, in vitro analysis of well-characterized CTD mutants provides evidence for assembly dependence on the second domain and suggests that the establishment of an NTD-CTD interface is a critical step in capsid assembly initiation. Overall, the data provide clear support for a model whereby capsid assembly within the maturing virion is dependent on the formation of a specific nucleating complex that involves a CA dimer and is directed by additional virion constituents.     

Adeno-associated virus type 2 capsids with externalized VP1/VP2 trafficking domains are generated prior to passage through the cytoplasm and are maintained until uncoating occurs in the nucleus

Common features of parvovirus capsids are open pores at the fivefold symmetry axes that traverse the virion shell. Upon limited heat treatment in vitro, the pores can function as portals to externalize VP1/VP2 protein N-terminal sequences which harbor infection-relevant functional domains, such as a phospholipase A(2) catalytic domain. Here we show that adeno-associated virus type 2 (AAV2) also exposes its VP1/VP2 N termini in vivo during infection, presumably in the endosomal compartment. This conformational change is influenced by treatment with lysosomotropic reagents. While incubation of cells with bafilomycin A1 reduced exposure of VP1/VP2 N termini, incubation with chloroquine stimulated externalization transiently. N-terminally located basic amino acid clusters with nuclear localization activity also become exposed in this process and are accessible on the virus capsid when it enters the cytoplasm. This is an obligatory step in AAV2 infection. However, a direct role of these sequences in nuclear translocation of viral capsids could not be determined by microinjection of wild-type or mutant viruses. This suggests that further modifications of the capsid have to take place in a precytoplasmic entry step that prepares the virus for nuclear entry. Microinjection of several capsid-specific antibodies into the cell nucleus blocked AAV2 infection completely, supporting the conclusion that AAV2 capsids bring the infectious genome into the nucleus.