Advantages of 2'-O-methyl oligoribonucleotide probes for detecting RNA targets.

We have compared various kinetic and melting properties of oligoribonucleotide probes containing 2'-O-methylnucleotides or 2'-deoxynucleotides with regard to their use in assays for the detection of nucleic acid targets. 2'-O-Methyl oligoribonucleotide probes bound to RNA targets faster and with much higher melting temperatures (Tm values) than corresponding 2'-deoxy oligoribonucleotide probes at all lengths tested (8-26 bases). Tm values of both probes increased with length up to approximately 19 bases, with maximal differences in Tm between 2'-O-methyl and 2'-deoxy oligoribonucleotide probes observed at lengths of 16 bases or less. In contrast to RNA targets, 2'-O-methyl oligoribonucleotide probes bound more slowly and with the same Tm to DNA targets as corresponding 2'-deoxy oligoribonucleotide probes. Because of their greatly enhanced Tm when bound to RNA, 2'-O-methyl oligoribonucleotide probes can efficiently bind to double-stranded regions of structured RNA molecules. A 17 base 2'-O-methyl oligoribonucleotide probe was able to bind a double-stranded region of rRNA whereas the same 17 base 2'- deoxy oligoribonucleotide probe did not. Due to their enhanced Tm when bound to RNA targets, shorter 2'-O-methyl oligoribonucleotide probes can be used in assays in place of longer 2'-deoxy oligoribonucleotide probes, resulting in enhanced discrimination between matched and mismatched RNA targets. A 12 base 2'-O-methyl oligoribonucleotide probe had the same Tm as a 19 base 2'-deoxy oligoribonucleotide probe when bound to a matched RNA target but exhibited a much larger decrease in Tm than the 2'-deoxy oligoribonucleotide probe when bound to an RNA target containing either 1 or 2 mismatched bases. The increased Tm, faster kinetics of hybridization, ability to bind to structured targets and increased specificity of 2'-O-methyl oligoribonucleotide probes render them superior to corresponding 2'-deoxy oligoribonucleotides for use in assays that detect RNA targets.     

MProbe: computer aided probe design for oligonucleotide microarrays

The present work describes a complete probe design software system for oligonucleotide microarrays based on Kane's research on probe sensitivity and specificity (Kane's rule). Combining Kane's rule and traditional criteria for probe design we constructed MProbe, the software system for oligonucleotide microarrays using Java. The general criteria for probe design are: (1) probes may have different lengths that range from 20 to 100 bases; (2) they should have a similar melting temperature (Tm) or GC content; (3) they should not contain stable secondary structures; and (4) they abide by Kane's rule.     

ROSO: optimizing oligonucleotide probes for microarrays

ROSO is software to design optimal oligonucleotide probe sets for microarrays. Selected probes show no significant cross-hybridization, no stable secondary structures and their Tm are chosen to minimize the Tm variability of the probe set. AVAILABILITY: The program is available on the internet. Sources are freely available, for non-profit use, on request to the authors. Supplementary information: http://pbil.univ-lyon1.fr/roso     

Enhancing the stability of oligonucleotide duplexes. The effect of adding 1-(2'-deoxy-beta-d-ribofuranosyl)-5-nitroindole

We studied the properties of DNA duplexes containing 5-nitroindole (N) in one of the chains. We synthesized 8-membered oligos with N at the 5' or at the 3' end: 5'-d(NXGACCGTC)-3' or 5'-d(GACCGTCXN)-3', where X is one of the four natural bases, making all four kinds of oligos with and without N. We also prepared 11-membered oligos complementary to the above octanucleotides: 5'-d(TGACGGTCYZT)-3' and 5'-d(TZYGACGGTCT)-3', where Y and Z are A, G, C, or T. The stability of duplexes obtained with these oligos was assessed by melting, and the thermodynamic parameters delta H, delta S, and Tm were calculated. Comparison of the melting curves for modified and nonmodified duplexes demonstrated that the presence of N at the 5' end of one chain raises the Tm by 6.6 degrees C on average; if N is at the 3' end of the same chain, the Tm increases by about 3 degrees C.     

Analysis of perfect and mismatched DNA duplexes by a generic hexanucleotide microchip

The thermodynamic analysis was done for the duplexes formed by fluorescently labeled oligonucleotide targets on a genetic hexanucleotide microchip. All 4096 different hexanucleotide chains were immobilized as probes in individual gel pads of the microchip. To strengthen the hybridization, each hexamer was extended at both ends by one nucleotide from the equimolar mixture of all four nucleotides to serve as nonselective linkers. It has been shown that the melting curves for oligonucleotide duplexes formed on the microchip and in a solution are quite similar. The influence of ionic surrounding has been studied in terms of the hybridization efficiency and discrimination between the mismatched and perfect duplexes. Different approaches have been tested to compensate the dependence of duplex stability on the GC content. It has been demonstrated that the use of chaotropic agents, addition of nonlabeled GC-rich competitor oligonucleotides, as well as creation of a temperature gradient along the microchip reproducing the distribution of melting temperatures, efficiently level out the AT/GC differences. The use of tetramethylammonium chloride for the same purpose was accompanied by weakening to some extent the discrimination between the mismatched duplexes and the perfect ones.     

Thermodynamic properties of DNA sequences: characteristic values for the human genome

MOTIVATION: Central to many molecular biology techniques as ubiquitous as PCR and Southern blotting is the design of oligonucleotide (oligo) probes and/or primers possessing specific thermodynamic properties. Here, we use validated theoretical methods to generate distributions of predicted thermodynamic properties for DNA oligos of various lengths. These distributions facilitate immediate appreciation of typical thermodynamic values for oligos of various lengths. RESULTS: Distributions of melting temperature (Tm), free energy (DeltaG(T)o), and fraction hybridized or fraction bound (Fb), are presented for oligos of length 10-50 bases sampled from the human genome. The effects of changing temperature, oligo and salt concentrations, constraining G+C content, and introducing mismatches are exemplified. Our results provide the first survey of typical and limiting thermodynamic values evaluated on a genomic scale. Described numbers comprise useful 'rules of thumb' that are applicable to most technologies dependent upon DNA oligo design.     

Base recognition of gap sites in DNA–DNA and DNA–RNA duplexes by short oligonucleotides

To increase base recognition capability and sensitivity, we propose the separation of a commonly used single-probe system for oligonucleotide analysis into a set of three probes: a fluorophore-labeled probe, a promoter probe, and a short probe. In this study, we found that the probes of only 4 nt in length can selectively bind the corresponding gap site on complexes consisting of the target, fluorophore-labeled probe, and promoter probe, exhibiting a more than 14-fold difference in ligation between the matched and mismatched sequences. Moreover, we demonstrated that the immobilized short probes accurately recognized the sequences of the gap sites.     

Fluorescein-labeled oligonucleotides for real-time pcr: using the inherent quenching of deoxyguanosine nucleotides

Fluorescein-labeled oligonucleotide probes can be used to continuously monitor the polymerase chain reaction. Depending on the sequence, the fluorescence intensity of the probe is either increased or decreased by hybridization. The greatest effect is probe quenching by hybridization to amplicons containing deoxyguanosine nucleotides (Gs), giving a sequence-specific decrease in fluorescence as product accumulates. Quenching of the probes by Gs is position dependent. A 25% decrease in fluorescence of 5'-labeled probes was observed with a G at the first position of the 3'-dangling end. Additional Gs can increase quenching to about 40%. This change in fluorescence with hybridization allows real-time quantification and mutation detection with a simple single labeled probe. Quantification of the initial template copy number is possible by monitoring fluorescence at each cycle at a constant temperature. Mutation detection by Tm estimates from melting curve analysis for factor V Leiden, hemoglobin C, hemoglobin S, the thermolabile mutation of methylenetetrahydrofolate reductase, and the cystic fibrosis-associated deletion F508del is demonstrated. By using the inherent quenching of deoxyguanosine nucleotides in the amplicon, complicated probe designs involving internal quenching can be avoided.     

Coupling into the base pair stack is necessary for DNA-mediated electrochemistry

The electrochemistry of DNA films modified with different redox probes linked to DNA through saturated and conjugated tethers was investigated. Experiments feature two redox probes bound to DNA on two surfaces: anthraquinone (AQ)-modified uridines incorporated into thiolated DNA on gold (Au) and 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO)-modified uridines in pyrene-labeled DNA on highly oriented pyrolytic graphite (HOPG). The electrochemistry of these labels when incorporated into DNA has been examined in DNA films containing both well matched and mismatched DNA. DNA-mediated electrochemistry is found to be effective for the TEMPO probe linked with an acetylene linker but not for a saturated TEMPO connected through an ethylenediamine linker. For the AQ probe, DNA-mediated electrochemistry is found with an acetylene linker to uridine but not with an alkyl chain to the 5' terminus of the oligonucleotide. Large electrochemical signals and effective discrimination of intervening base mismatches are achieved for the probes connected through the acetylene linkages, while probes connected through saturated linkages exhibit small electrochemical signals associated only with direct surface to probe charge transfer and poor mismatch discrimination. Thus DNA electrochemistry with these probes is dramatically influenced by the chemical nature of their linkage to DNA. These results highlight the importance of effective coupling into the pi-stack for long-range DNA-mediated electrochemistry.     

Selection of optimal oligonucleotide probes for microarrays using multiple criteria, global alignment and parameter estimation

The oligonucleotide specificity for microarray hybridization can be predicted by its sequence identity to non-targets, continuous stretch to non-targets, and/or binding free energy to non-targets. Most currently available programs only use one or two of these criteria, which may choose ‘false’ specific oligonucleotides or miss ‘true’ optimal probes in a considerable proportion. We have developed a software tool, called CommOligo using new algorithms and all three criteria for selection of optimal oligonucleotide probes. A series of filters, including sequence identity, free energy, continuous stretch, GC content, self-annealing, distance to the 3′-untranslated region (3′-UTR) and melting temperature (T_m), are used to check each possible oligonucleotide. A sequence identity is calculated based on gapped global alignments. A traversal algorithm is used to generate alignments for free energy calculation. The optimal T_m interval is determined based on probe candidates that have passed all other filters. Final probes are picked using a combination of user-configurable piece-wise linear functions and an iterative process. The thresholds for identity, stretch and free energy filters are automatically determined from experimental data by an accessory software tool, CommOligo_PE (CommOligo Parameter Estimator). The program was used to design probes for both whole-genome and highly homologous sequence data. CommOligo and CommOligo_PE are freely available to academic users upon request.     

Guidelines for incorporating non-perfectly matched oligonucleotides into target-specific hybridization probes for a DNA microarray

Sequence-specific oligonucleotide probes play a crucial role in hybridization techniques including PCR, DNA microarray and RNA interference. Once the entire genome becomes the search space for target genes/genomic sequences, however, cross-hybridization to non-target sequences becomes a problem. Large gene families with significant similarity among family members, such as the P450s, are particularly problematic. Additionally, accurate single nucleotide polymorphism (SNP) detection depends on probes that can distinguish between nearly identical sequences. Conventional oligonucleotide probes that are perfectly matched to target genes/genomic sequences are often unsuitable in such cases. Carefully designed mismatches can be used to decrease cross-hybridization potential, but implementing all possible mismatch probes is impractical. Our study provides guidelines for designing non-perfectly matched DNA probes to target DNA sequences as desired throughout the genome. These guidelines are based on the analysis of hybridization data between perfectly matched and non-perfectly matched DNA sequences (single-point or double-point mutated) calculated in silico. Large changes in hybridization temperature predicted by these guidelines for non-matched oligonucleotides fit independent experimental data very well. Applying the guidelines to find oligonucleotide microarray probes for P450 genes, we confirmed the ability of our point mutation method to differentiate the individual genes in terms of thermodynamic calculations of hybridization and sequence similarity.     

Detection of polymorphisms at exons 3 (Tyr113-->His) and 4 (His139-->Arg) of the microsomal epoxide hydrolase gene using fluorescence PCR method combined with melting curves analysis

An association between exon 3 polymorphisms of the gene encoding microsomal epoxide hydrolase (mEH) and susceptibility to the development of chronic obstructive pulmonary disease (COPD) has been described. We have developed two methods for detecting polymorphisms at exons 3 (Tyr113-->His) and 4 (His139-->Arg) of the mEH gene based on different melting temperatures (T(m)) of fluorescent-labeled oligonucleotide hybridization probes using single-step assays that combine fluorescence PCR and melting curve analysis (LightCycler methodology). DNA was extracted from blood in 79 COPD patients and 146 healthy controls. Results were compared with those obtained by restriction fragment length polymorphism (RFLP) analysis to detect Tyr113His variants and a single-strand conformation polymorphism (SSCP) assay for His139Arg detection. The T(m) of the exon 3 polymorphisms were 61.3 degrees C for Tyr113 (wild type) and 67.5 degrees C for His113 (mutant). The T(m) values of the exon 4 polymorphisms were 67.5 degrees C for His139 (wild type) and 59.2 degrees C for Arg139 (mutant). The within- and between-run melting peaks for the same allele differed by less than 0.5 degrees C for both the exon 3 and the exon 4 polymorphisms. Thus, melting analysis allowed easy and unambiguous assignment of genotyping by means of the respective melting curves. The proportion of individuals who were homozygous mutant for exon 3 was significantly higher in the COPD group than in the control group (p=0.004). LightCycler fluorescence genotyping of exon 4 polymorphisms correlated perfectly with SSCP results. RFLP assay classified 2 patients as homozygous mutant while LightCycler analysis genotyped them as heterozygous. DNA analysis by PCR and sequencing confirmed the LightCycler result. These high-speed (about 40 min for 32 samples), highly sensitive, and specific small-volume assays with low labor requirements hold great promise as tools for rapid detection of COPD susceptibility.     

Systematic evaluation of single mismatch stability predictors for fluorescence in situ hybridization

The mismatch discrimination potential of probes in fluorescence in situ hybridization can be defined as the difference between the melting formamide points of perfect complementary and mismatched duplexes (Delta[FA](m)). Using a combined experimental and theoretical approach, Delta[FA](m) was determined for a set of 35 mismatched probes targeting seven locations in the 16S rRNA of Escherichia coli. The mismatches were created by changing single nucleotides on the probes, while maintaining the target unmodified. Estimated Delta[FA](m) values were used to systematically evaluate four predictors of mismatch stability: weighted mismatch (WM) scores from the software arb, published statistical summary of microarray hybridizations, free energy of mismatch stability (DeltaDeltaG degrees (1)) and theoretical Delta[FA](m) estimations obtained with a thermodynamic model. Based on the predictors' ability to explain variability in Delta[FA](m) and to discriminate weak mismatches from strong ones, DeltaDeltaG degrees (1) and WM scores from arb (with an updated set of relative strength parameters) were demonstrated to be adequate estimators of mismatch stability, with DeltaDeltaG degrees (1) offering the benefit of capturing the variability associated with nearest-neighbour effects and being compatible with thermodynamic models of in situ hybridization. The use of DeltaDeltaG degrees (1) and WM in probe design was illustrated as a tool that complements experimental design approaches.     

Mismatch and G-Stack Modulated Probe Signals on SNP Microarrays

Background

Single nucleotide polymorphism (SNP) arrays are important tools widely used for genotyping and copy number estimation. This technology utilizes the specific affinity of fragmented DNA for binding to surface-attached oligonucleotide DNA probes. We analyze the variability of the probe signals of Affymetrix GeneChip SNP arrays as a function of the probe sequence to identify relevant sequence motifs which potentially cause systematic biases of genotyping and copy number estimates.

Methodology/Principal Findings

The probe design of GeneChip SNP arrays enables us to disentangle different sources of intensity modulations such as the number of mismatches per duplex, matched and mismatched base pairings including nearest and next-nearest neighbors and their position along the probe sequence. The effect of probe sequence was estimated in terms of triple-motifs with central matches and mismatches which include all 256 combinations of possible base pairings. The probe/target interactions on the chip can be decomposed into nearest neighbor contributions which correlate well with free energy terms of DNA/DNA-interactions in solution. The effect of mismatches is about twice as large as that of canonical pairings. Runs of guanines (G) and the particular type of mismatched pairings formed in cross-allelic probe/target duplexes constitute sources of systematic biases of the probe signals with consequences for genotyping and copy number estimates. The poly-G effect seems to be related to the crowded arrangement of probes which facilitates complex formation of neighboring probes with at minimum three adjacent G''s in their sequence.

Conclusions

The applied method of “triple-averaging” represents a model-free approach to estimate the mean intensity contributions of different sequence motifs which can be applied in calibration algorithms to correct signal values for sequence effects. Rules for appropriate sequence corrections are suggested.     

Development of specific oligonucleotide probes for the identification and in situ detection of hydrocarbon-degrading Alcanivorax strains

The genus Alcanivorax comprises diverse hydrocarbon-degrading marine bacteria. Novel 16S rRNA-targeted oligonucleotide DNA probes (ALV735 and ALV735-b) were developed to quantify two subgroups of the Alcanivorax / Fundibacter group by fluorescence in situ hybridization (FISH), and the conditions for the single-mismatch discrimination of the probes were optimized. The specificity of the probes was improved further using a singly mismatched oligonucleotide as a competitor. The growth of Alcanivorax cells in crude oil-contaminated sea water under the biostimulation condition was investigated by FISH with the probe ALV735, which targeted the main cluster of the Alcanivorax / Fundibacter group. The size of the Alcanivorax population increased with increasing incubation time and accounted for 91% of the 4',6-diamidino-2-phenylindole (DAPI) count after incubation for 2 weeks. The probes developed in this study are useful for detecting Alcanivorax populations in petroleum hydrocarbon-degrading microbial consortia.     

Selection of oligonucleotide probes and experimental conditions for multiplex hybridization experiments

Different DNA probes hybridize under different conditions. I examine the constraints of the design of oligonucleotide probes that are meant to hybridize to different unique sites in human genomic DNA under a single set of hybridization conditions as a parallel array. In 522 kb of human genomic DNA, 75% of 12-base and 89% of 22-base are unique, as opposed to 90% and 100% as expected of unstructured DNA, and this is not due solely to repetitive elements in the DNA. Hybridization in TMAC to reduce A + T content effects on melting temperature allows only 90% of unique targets to be hybridized under one set of conditions if a 2°C difference between matched and mismatched sequences is required. Standard hybridization conditions allow no more than 60% of unique probes to be used together. This suggests that probe, hybridization conditions, and instrument design for multiple-probe hybridization applications will be harder than previously suggested.     

Kinetic stability of intermolecular DNA quadruplexes

Fluorescently labeled oligodeoxyribonucleotides containing a single tract of four successive guanines have been used to study the thermodynamic and kinetic properties of short intermolecular DNA quadruplexes. When these assemble to form intermolecular quadruplexes the fluorophores are in close proximity and the fluorescence is quenched. On raising the temperature these complexes dissociate and there is a large increase in fluorescence. These complexes are exceptionally stable in potassium-containing buffers, and possess Tm values that are too high to measure. Tm values were determined in sodium-containing buffers for which the rate of reannealing is extremely slow; the melting profiles are effectively irreversible, and the apparent melting temperatures are dependent on the rates of heating. The dissociation kinetics of these complexes was estimated by rapidly increasing the temperature and following the time-dependent changes in fluorescence. From these data we have estimated the half-lives of these quadruplexes at 37 degrees C. Addition of a T to the unlabeled end of the oligonucleotide increases quadruplex stability. In contrast, addition of a T between the fluorophore and the oligonucleotide leads to a decrease in stability.     

Analysis of crucial factors resulting in microarray hybridization failure

The factors that affect the formation and stability of DNA/DNA duplexes are complicated and still mostly unknown. In this study attempts were made to look for the crucial factor affecting hybridization failure in DNA microarray assays. A comprehensive range of factors were investigated simultaneously using a 25-mer oligonucleotide Potyvirus microarray. These included steric hindrance, direct/indirect labelling types, distance of a probe to the fluorescent labelling end, target (the DNA fragment used to hybridize with microarray probes) strand types either single strand or double strand, probes without mismatch and with different numbers of mismatch nucleotides (up to 36%) and different mismatch locations (5' end, centre and 3' end), probe GC content and T(m), secondary structures of probes and targets, different target lengths (0.277 kb to ~1.3 kb) and concentrations (0.1-30 nM). The results showed that whilst most of these known factors were unlikely to be the main causes of failed hybridization, there was strong evidence suggesting that the viral amplicon target structure is the most crucial factor. However, computing predicted target secondary structures by Mfold showed no correlation with the hybridization results. One explanation is that the predicted target secondary structures are different from the real structures. Here we postulate that the real target structure might be a combination of secondary structures resulting in a three-dimensional structure from exposure to three types of sub-structures: (1) a completely exposed linear structure to allow probes access for the successful hybridization and showing strong fluorescent signals; (2) a partially exposed structure to allow unstable binding and showing weak fluorescent signals; (3) a closed structure resulting in failed hybridization. These results are very important for microarray based studies as they not only provide an explanation for some current controversial results, but also provide potential resolution for the future studies. Due to the lack of available software for predicting the true target structure, development of microarrays should conduct an initial oligonucleotide probe selection procedure and those probes with capacity to hybridize with the target should be considered for the microarray development.     

Impact of prehybridization PCR amplification on microarray detection of nitrifying bacteria in wastewater treatment plant samples

A gel-based microarray that included a set of 26 oligonucleotide probes targeting all nitrifying bacteria at varying levels of specificity suggested the presence of targeted microorganisms when hybridized to RNA isolated from a wastewater treatment plant, but could not discriminate between perfectly matched and mismatched sequences due in part to low signal intensity. To enhance sensitivity and improve discrimination, polymerase chain reaction was used to selectively amplify the 16S rRNA genes of specific nitrifier groups. RNA transcribed from these DNA templates was hybridized to the microarray and thermal dissociation analysis was used to characterize the specificity of hybridization. Amplification with Nitrospira-specific primers resulted in the selective amplification of this target group, confirmed by both a significant increase in signal intensity and a melting profile identical to the reference RNA. In contrast, Nitrobacter was not detected in the environmental samples with probe Nbac1000 despite pre-amplification with Nitrobacter-specific primers, indicating the absence of strains containing this Nitrobacter-specific sequence. Pre-amplification using primers specific for beta-Proteobacterial ammonia-oxidizing bacteria resulted in a significant increase in signal intensity for probe Nso190, but melting profiles for probe Nso190 showed a slight deviation between amplified RNA and the reference microorganism, suggesting that the amplification products contained some sequences that varied by a single nucleotide difference in the probe target region.