Environmental impacts of hybrid and electric vehicles—a review

Purpose

A literature review is undertaken to understand how well existing studies of the environmental impacts of hybrid and electric vehicles (EV) address the full life cycle of these technologies. Results of studies are synthesized to compare the global warming potential (GWP) of different EV and internal combustion engine vehicle (ICEV) options. Other impacts are compared; however, data availability limits the extent to which this could be accomplished.

Method

We define what should be included in a complete, state-of-the-art environmental assessment of hybrid and electric vehicles considering components and life cycle stages, emission categories, impact categories, and resource use and compare the content of 51 environmental assessments of hybrid and electric vehicles to our definition. Impact assessment results associated with full life cycle inventories (LCI) are compared for GWP as well as emissions of other pollutants. GWP results by life cycle stage and key parameters are extracted and used to perform a meta-analysis quantifying the impacts of vehicle options.

Results

Few studies provide a full LCI for EVs together with assessment of multiple impacts. Research has focused on well to wheel studies comparing fossil fuel and electricity use as the use phase has been seen to dominate the life cycle of vehicles. Only very recently have studies begun to better address production impacts. Apart from batteries, very few studies provide transparent LCIs of other key EV drivetrain components. Estimates of EV energy use in the literature span a wide range, 0.10?C0.24?kWh/km. Similarly, battery and vehicle lifetime plays an important role in results, yet lifetime assumptions range between 150,000?C300,000?km. CO₂ and GWP are the most frequently reported results. Compiled results suggest the GWP of EVs powered by coal electricity falls between small and large conventional vehicles while EVs powered by natural gas or low-carbon energy sources perform better than the most efficient ICEVs. EV results in regions dependant on coal electricity demonstrated a trend toward increased SO _x emissions compared to fuel use by ICEVs.

Conclusions

Moving forward research should focus on providing consensus around a transparent inventory for production of electric vehicles, appropriate electricity grid mix assumptions, the implications of EV adoption on the existing grid, and means of comparing vehicle on the basis of common driving and charging patterns. Although EVs appear to demonstrate decreases in GWP compared to conventional ICEVs, high efficiency ICEVs and grid-independent hybrid electric vehicles perform better than EVs using coal-fired electricity.     

Habitat management: a tool to modify ecosystem impacts of nitrogen deposition?

Atmospheric nitrogen deposition has been shown to affect both the structure and the function of heathland ecosystems. Heathlands are semi-natural habitats and, as such, undergo regular management by mowing or burning. Different forms of management remove more or less nutrients from the system, so habitat management has the potential to mitigate some of the effects of atmospheric deposition. Data from a dynamic vegetation model and two field experiments are presented. The first involves nitrogen addition following different forms of habitat management. The second tests the use of habitat management to promote heathland recovery after a reduction in nitrogen deposition. Both modelling and experimental approaches suggest that plant and microbial response to nitrogen is affected by management. Shoot growth and rates of decomposition were lowest in plots managed using more intensive techniques, including mowing with litter removal and a high temperature burn. Field data also indicate that ecosystem recovery from prolonged elevated inputs of nitrogen may take many years, or even decades, even after the removal of plant and litter nitrogen stores which accompanies the more intensive forms of habitat management.     

Environmental impacts of hybrid,plug-in hybrid,and battery electric vehicles—what can we learn from life cycle assessment?

Purpose

The purpose of this review article is to investigate the usefulness of different types of life cycle assessment (LCA) studies of electrified vehicles to provide robust and relevant stakeholder information. It presents synthesized conclusions based on 79 papers. Another objective is to search for explanations to divergence and “complexity” of results found by other overviewing papers in the research field, and to compile methodological learnings. The hypothesis was that such divergence could be explained by differences in goal and scope definitions of the reviewed LCA studies.

Methods

The review has set special attention to the goal and scope formulation of all included studies. First, completeness and clarity have been assessed in view of the ISO standard’s (ISO 2006a, b) recommendation for goal definition. Secondly, studies have been categorized based on technical and methodological scope, and searched for coherent conclusions.

Results and discussion

Comprehensive goal formulation according to the ISO standard (ISO 2006a, b) is absent in most reviewed studies. Few give any account of the time scope, indicating the temporal validity of results and conclusions. Furthermore, most studies focus on today’s electric vehicle technology, which is under strong development. Consequently, there is a lack of future time perspective, e.g., to advances in material processing, manufacturing of parts, and changes in electricity production. Nevertheless, robust assessment conclusions may still be identified. Most obvious is that electricity production is the main cause of environmental impact for externally chargeable vehicles. If, and only if, the charging electricity has very low emissions of fossil carbon, electric vehicles can reach their full potential in mitigating global warming. Consequently, it is surprising that almost no studies make this stipulation a main conclusion and try to convey it as a clear message to relevant stakeholders. Also, obtaining resources can be observed as a key area for future research. In mining, leakage of toxic substances from mine tailings has been highlighted. Efficient recycling, which is often assumed in LCA studies of electrified vehicles, may reduce demand for virgin resources and production energy. However, its realization remains a future challenge.

Conclusions

LCA studies with clearly stated purposes and time scope are key to stakeholder lessons and guidance. It is also necessary for quality assurance. LCA practitioners studying hybrid and electric vehicles are strongly recommended to provide comprehensive and clear goal and scope formulation in line with the ISO standard (ISO 2006a, b).     

Environmental impacts of food consumption and nutrition: where are we and what is next?

Purpose

This article introduces the special issue “LCA of nutrition and food consumption” and 14 papers selected from the Ninth LCA Food Conference in San Francisco in October 2014.

Literature overview

The scientific literature in the field of food LCA has increased more than ten times during the last 15 years. Nutrition has a high contribution to the total environmental impacts of consumption. Agricultural production often dominates the impacts, but its importance depends on the type of product, its production mode, transport, and processing. Local or domestic products reduce transports, but this advantage can be lost if the impacts of the raw material production are substantially increased. Diets containing less meat tend to be more environmentally friendly. Several studies concluded that respecting the dietary recommendations for a healthy diet would reduce the overall environmental impacts in the developed countries, although this is not a universal conclusion.

Contribution of this special issue

Eight papers analyze the environmental impacts of catering and in-house food consumption and impacts on sectoral and national levels; four papers presents tools and methods to better assess the impacts of nutrition and to implement the results in practical decision-making. Finally, two contributions analyze the impacts of food waste and reduction options.

Challenges for the environmental assessment of nutrition

(i) Comprehensive assessment. Most studies only analyze climate impacts, although data, methods, and tools are readily available for a more comprehensive analysis. (ii) Assessment of sustainability. The social dimension remains the weakest pillar. (iii) Data availability is still an obstacle, but significant progress has been made in recent years. (iv) Lack of harmonization of methodologies makes comparisons among studies difficult. (v) Land use. Enhanced consideration of land use impacts on biodiversity and ecosystem services is required in LCA. (vi) Defining the functional unit including nutritional aspects, food security, and health needs further work. (vii) Consumer behavior. Its impacts are still little assessed. (viii) Communication of the environmental impact assessment results to stakeholders including policy-makers and consumers needs additional efforts.

Research needs and outlook

(i) Development of holistic approaches for the assessment of sustainable food systems, (ii) assessment of land use related impacts and inclusion of ecosystem services, (iii) exploration of LCA results for policy support and decision-making, (iv) investigation of food consumption patterns in developing and emerging countries, and (v) harmonization of databases.

     

The management of crop structure: a general approach to reversing the impacts of agricultural intensification on birds?

Agricultural intensification is accepted widely as a cause of bird population declines on farmland in Europe and North America. Although intensification is multivariate, one common theme is the impact on variation in crop structure, both within and between fields. Intensification creates simpler, more homogeneous and denser swards in both tillage crops and grassland. This influences predation risk, exposure to weather extremes and the diversity, abundance and accessibility of food. Birds trade off these pressures in different ways, so that the more uniform and dense the vegetation, the fewer the number of birds and range of species that are able to nest and forage successfully. Reversing recent trends towards dense, simplified and homogeneous swards will improve nesting and foraging habitat conditions for a wide range of species across farming systems, and may represent a cost-effective mechanism for the further improvement of agri-environment scheme options designed to assist the recovery of farmland bird populations.     

Environmental impacts of European trade: interpreting results of process-based LCA and environmentally extended input–output analysis towards hotspot identification

Purpose

Trade is increasingly considered a significant contributor to environmental impacts. The assessment of the impacts of trade is usually performed via environmentally extended input–output analysis (EEIOA). However, process-based life cycle assessment (LCA) applied to traded goods allows increasing the granularity of the analysis and may be essential to unveil specific impacts due to traded products.

Methods

This study assesses the environmental impacts of the European trade, considering two modelling approaches: respectively EEIOA, using EXIOBASE 3 as supporting database, and process-based LCA. The interpretation of the results is pivotal to improve the robustness of the assessment and the identification of hotspots. The hotspot identification focuses on temporal trends and on the contribution of products and substances to the overall impacts. The inventories of elementary flows associated with EU trade, for the period 2000–2010, have been characterized considering 14 impact categories according to the Environmental Footprint (EF2017) Life Cycle Impact Assessment method.

Results and discussion

The two modelling approaches converge in highlighting that in the period 2000–2010: (i) EU was a net importer of environmental impacts; (ii) impacts of EU trade and EU trade balance (impacts of imports minus impacts of exports) were increasing over time, regarding most impact categories under study; and (iii) similar manufactured products were the main contributors to the impacts of exports from EU, regarding most impact categories. However, some results are discrepant: (i) larger impacts are obtained from IO analysis than from process-based LCA, regarding most impact categories, (ii) a different set of most contributing products is identified by the two approaches in the case of imports, and (iii) large differences in the contributions of substances are observed regarding resource use, toxicity, and ecotoxicity indicators.

Conclusions

The interpretation step is crucial to unveil the main hotspots, encompassing a comparison of the differences between the two methodologies, the assumptions, the data coverage and sources, the completeness of inventory as basis for impact assessment. The main driver for the observed divergences is identified to be the differences in the impact intensities of goods, both induced by inherent properties of the IO and life cycle inventory databases and by some of this study’s modelling choices. The combination of IO analysis and process-based LCA in a hybrid framework, as performed in other studies but generally not at the macro-scale of the full trade of a country or region, appears a potential important perspective to refine such an assessment in the future.

     

Evaluation of ancestral inbreeding coefficients: Ballou’s formula versus gene dropping

Estimation of the purging of detrimental effects through inbreeding and selection is an important issue in conservation genetics opening new perspectives for the management of small populations. In 1997 Ballou proposed the ancestral inbreeding coefficient, which is calculated recursively via pedigree inbreeding coefficients, as a tool for evaluating the purging of deleterious alleles in zoo populations. The formula of Ballou assumes independence of inbreeding and ancestral inbreeding coefficients at any stage of the recursion. This study investigates the consequences of this inaccuracy on the estimation of true ancestral inbreeding, i.e. the proportion of alleles within a genome that has undergone inbreeding in the past. As an alternative we propose the estimation of ancestral inbreeding by the method of gene dropping. The methods are compared by stochastic simulation for various models with respect to mode of inheritance (neutral, detrimental and lethal alleles) and different settings for population size and initial allele frequencies. In all scenarios the proportion of alleles within a genome that has undergone inbreeding in the past was overestimated by Ballou’s formula. The overestimation was more pronounced in smaller populations but was not affected by genetic model or initial allele frequency. In contrast, the ancestral inbreeding coefficient calculated by gene dropping provided a robust estimate of ancestral inbreeding in most models and settings. A marginal overestimation was observed only in models with lethal alleles. Therefore, we recommend applying the gene dropping approach to estimate ancestral inbreeding coefficients.     

Doctors’ versus patients’ global assessments of treatment effectiveness: empirical survey of diverse treatments in clinical trials

Objective To examine whether doctors’ global assessments of treatment effects agree with patients’ global assessments.Design Survey of trials included in systematic reviews of treatments for diverse conditions.Data sources Cochrane database of systematic reviews.Data extracted Data on patients’ global assessments and on doctors’ global assessment for the same treatment against the same comparator.Main outcome measures Relative odds ratio (ratio of odds ratios of global improvement with the experimental intervention versus control according to doctors compared with patients), and improvement rates according to doctors and patients.Results Doctors’ global assessments were compared with patients’ global assessments for 63 different treatment comparisons (240 trials) in 18 conditions. The summary relative odds ratio across the comparisons was not significant (0.98, 95% confidence interval 0.88 to 1.08; I²=0%, 95% confidence interval 0% to 30%). In 62 of the 63 comparisons the effects of treatment rated by patients and by doctors did not differ beyond chance, but for single comparisons the confidence intervals were large. Rates of improvement on average did not differ between doctors’ assessments and patients’ assessments (summary relative odds ratio 0.98, 0.88 to 1.06; I²=0%, 0% to 24%).Conclusion Doctors’ global assessments of the effects of treatments are on average similar to those of patients.     

Environmental parasitology: What can parasites tell us about human impacts on the environment?

There are a variety of ways that environmental changes affect parasites, suggesting that information on parasites can indicate anthropogenic impacts. Parasitism may increase if the impact reduces host resistance or increases the density of intermediate or definitive hosts. Parasitism may decrease if definitive or intermediate host density declines or parasites suffer higher mortality directly (eg. from toxic effects on parasites) or indirectly (infected hosts suffer differentially high mortality). Although these scenarios are opposing, they can provide a rich set of predictions once we understand the true associations between each parasite and impact. In this review, Kevin Lafferty discusses how parasite ecologists have used and can use parasites to assess environmental quality.     

The role of nodal roots in prostrate clonal herbs: ‘phalanx’ versus ‘guerrilla’

The influence of nodal rooting on branching was studied in three evolutionarily and morphologically diverse species of prostrate clonal herbs: Tradescantia fluminensis (a monocotyledonous extreme ‘phalanx’ species), Calystegia silvatica (a dicotyledonous extreme ‘guerrilla’ species) and Trifolium repens (a dicotyledonous intermediate species). In all three, branch development from axillary buds is regulated by a positive signal produced by roots together with inhibitory influences from both pre-existing branches and shoot apical buds (apical dominance). Responses to nodal roots are cumulative and increased root activity leads to more vigorous bud outgrowth. In the absence of nodal roots, a single basal root system is unable to maintain continued extension growth of the shoot. We suggest that as individual nodal roots and stem internodes are both short-lived in these nodally-rooting clonal species, the plants’ investment in them is minimal. Thus, in contrast to perennial species lacking nodal roots, individual root systems in prostrate clonal herbs are small and stems have little secondary thickening and development of long-distance transport tissues. Hence the decline in extension growth of the shoot in the absence of nodal roots could be linked to the weak development of long-distance transport tissues in their relatively thin horizontal stems and to resource sharing between primary stems and lateral branches (as suggested by the greater retardation of primary stem growth in the more profusely branched ‘phalanx’ species (Trifolium and Tradescantia) than in the weakly branched ‘guerrilla’ species, Calystegia). These findings are consistent with the view that the long-term persistence of genotypes of nodally-rooting prostrate species is dependent upon them encountering the moist conditions required to facilitate the continual development of new young nodal root systems.     

Copepod phylogeny: a reconsideration of Huys & Boxshall's ‘parsimony versus homology’

A hypothesis of copepod phylogeny proposed by Huys & Boxshall (1991) was reanalyzed with the PAUP computer program by using TOPOLOGY and DELTRAN options to remove many character reversals. The remaining reversal characters were removed employing the Camin-Sokal Optimization Procedure. The resulting tree is two steps longer than the best fit tree (Tree C) obtained strictly by using parsimony criterion and optimizd with the same procedure. Further analysis revealed that the differences in these two cladograms are essentially due to the differential treatment of nine characters and varied assumptions of missing state in another six characters as being apomorphies or plesiomorphies. Huys & Boxshall's hypotheses of character polarity in the copepods are shown not to be in conflict with the principle of parsimony. According to the principle of parsimony, their Tree C is the best supported phylogenetic hypothesis for Copepoda.     

Chk1 versus Cdc25: Chking One’s Levels of Cellular Proliferation

This review summarizes recent studies which have provided new insight into the mechanisms by which the DNA damage response kinase, Chk1 inhibits the dual specificity phosphatase, Cdc25, and thereby regulates cell cycle progression. Recently, Chk1 has been shown to not only regulate Cdc25A degradation but also its ability to interact with various Cdk complexes through phosphorylation of the carboxy-terminus of the phosphatase. Surprisingly, these effects appear to be specific for Chk1, but not Chk2, which may explain the recently reported in vivo haploinsufficiency phenotype observed in the mammary gland using a Chk1 conditional mouse model.     

Influence of Vectors’ Risk-Spreading Strategies and Environmental Stochasticity on the Epidemiology and Evolution of Vector-Borne Diseases: The Example of Chagas’ Disease

Insects are known to display strategies that spread the risk of encountering unfavorable conditions, thereby decreasing the extinction probability of genetic lineages in unpredictable environments. To what extent these strategies influence the epidemiology and evolution of vector-borne diseases in stochastic environments is largely unknown. In triatomines, the vectors of the parasite Trypanosoma cruzi, the etiological agent of Chagas’ disease, juvenile development time varies between individuals and such variation most likely decreases the extinction risk of vector populations in stochastic environments. We developed a simplified multi-stage vector-borne SI epidemiological model to investigate how vector risk-spreading strategies and environmental stochasticity influence the prevalence and evolution of a parasite. This model is based on available knowledge on triatomine biodemography, but its conceptual outcomes apply, to a certain extent, to other vector-borne diseases. Model comparisons between deterministic and stochastic settings led to the conclusion that environmental stochasticity, vector risk-spreading strategies (in particular an increase in the length and variability of development time) and their interaction have drastic consequences on vector population dynamics, disease prevalence, and the relative short-term evolution of parasite virulence. Our work shows that stochastic environments and associated risk-spreading strategies can increase the prevalence of vector-borne diseases and favor the invasion of more virulent parasite strains on relatively short evolutionary timescales. This study raises new questions and challenges in a context of increasingly unpredictable environmental variations as a result of global climate change and human interventions such as habitat destruction or vector control.