Rapid detection and differentiation of the major mycoplasma contaminants in cell cultures using real-time PCR with SYBR Green I and melting curve analysis

A quantitative real-time polymerase chain reaction (PCR) procedure followed by melting curve analysis, using the green fluorescence dye SYBR Green I, was developed for rapid detection and differentiation of mycoplasma contaminants in cell cultures. This method showed that the detection of the target sequence was linear over a range from 10(4) to 10 colony-forming units (CFU) of the mycoplasma cells. Analysis of the melting temperature of the PCR products allowed differentiation of the major mycoplasma contaminants. These results demonstrate that the protocol described in the present study can decrease the time to obtain reproducible results by simultaneous detection and differentiation of the Mycoplasma species contaminating cell cultures.     

Quantitative analysis of total mitochondrial DNA: competitive polymerase chain reaction versus real-time polymerase chain reaction

An efficient and effective method for quantification of small amounts of nucleic acids contained within a sample specimen would be an important diagnostic tool for determining the content of mitochondrial DNA (mtDNA) in situations where the depletion thereof may be a contributing factor to the exhibited pathology phenotype. This study compares two quantification assays for calculating the total mtDNA molecule number per nanogram of total genomic DNA isolated from human blood, through the amplification of a 613-bp region on the mtDNA molecule. In one case, the mtDNA copy number was calculated by standard competitive polymerase chain reaction (PCR) technique that involves co-amplification of target DNA with various dilutions of a nonhomologous internal competitor that has the same primer binding sites as the target sequence, and subsequent determination of an equivalence point of target and competitor concentrations. In the second method, the calculation of copy number involved extrapolation from the fluorescence versus copy number standard curve generated by real-time PCR using various dilutions of the target amplicon sequence. While the mtDNA copy number was comparable using the two methods (4.92 +/- 1.01 x 10(4) molecules/ng total genomic DNA using competitive PCR vs 4.90 +/- 0.84 x 10(4) molecules/ng total genomic DNA using real-time PCR), both inter- and intraexperimental variance were significantly lower using the real-time PCR analysis. On the basis of reproducibility, assay complexity, and overall efficiency, including the time requirement and number of PCR reactions necessary for the analysis of a single sample, we recommend the real-time PCR quantification method described here, as its versatility and effectiveness will undoubtedly be of great use in various kinds of research related to mitochondrial DNA damage- and depletion-associated disorders.     

Development of melting temperature-based SYBR Green I polymerase chain reaction methods for multiplex genetically modified organism detection

Commercialization of several genetically modified crops has been approved worldwide to date. Uniplex polymerase chain reaction (PCR)-based methods to identify these different insertion events have been developed, but their use in the analysis of all commercially available genetically modified organisms (GMOs) is becoming progressively insufficient. These methods require a large number of assays to detect all possible GMOs present in the sample and thereby the development of multiplex PCR systems using combined probes and primers targeted to sequences specific to various GMOs is needed for detection of this increasing number of GMOs. Here we report on the development of a multiplex real-time PCR suitable for multiple GMO identification, based on the intercalating dye SYBR Green I and the analysis of the melting curves of the amplified products. Using this method, different amplification products specific for Maximizer 176, Bt11, MON810, and GA21 maize and for GTS 40-3-2 soybean were obtained and identified by their specific Tm. We have combined amplification of these products in a number of multiplex reactions and show the suitability of the methods for identification of GMOs with a sensitivity of 0.1% in duplex reactions. The described methods offer an economic and simple alternative to real-time PCR systems based on sequence-specific probes (i.e., TaqMan chemistry). These methods can be used as selection tests and further optimized for uniplex GMO quantification.     

Evaluation of touch-down real-time PCR based on SYBR Green I fluorescent dye for the detection of Neisseria meningitidis in clinical samples

Antibiotic treatment prior to transport or admission of patients to hospital has reduced the proportion of patients with invasive meningococcal disease (IMD) from whom Neisseria meningitidis can be isolated by standard microbiological techniques. Assays to detect the crgA gene were used to detect meningococcal DNA by both conventional polymerase chain reaction (PCR) and real-time PCR (RTPCR) in relation to microbiological diagnosis of cases over two years between 2002 and 2003. The sensitivity of both PCR assays for culture-confirmed cases was 93% and the specificity was 98.6%. Agreement between the two PCR assays was 96.2%. The inter- and intra-assay variations and effects of different amounts of DNA on the melting temperatures were examined. The touch-down RTPCR based on SYBR Green I fluorescent dye detected and characterized N. meningitidis in clinical samples within one hour.     

SYBR Green I荧光RT-PCR法检测贝类中的诺如病毒

针对诺如病毒II型的保守区域设计引物,建立了SYBR Green I实时荧光RT-PCR检测诺如病毒II型的反应体系。此方法的病毒检测下限达到102拷贝,标准曲线的线形范围为102~106拷贝,相关系数为0.9952,斜率为?2.982,截距为35.84。对诺如病毒II型检测特异,与轮状病毒、腺病毒、甲肝病毒、星状病毒无交叉反应。针对质粒标准品检测的批内试验变异系数 (CV) 为0.95％~1.69％ (n=5),批间试验CV为0.87％~1.24％ (n=3)。运用此方法随机检测30份贝类水产品,检测出2份阳性样品。结果表明,SYBR Green I荧光RT-PCR检测诺如病毒II型的方法灵敏、特异、重复性好,可应用于贝类水产品的快速检测。     

Comparison of DNA extraction methods for multiplex polymerase chain reaction

We compared six DNA extraction methods for obtaining DNA from whole blood and saliva for use in multiplex polymerase chain reaction (PCR) assays. The aim was to evaluate saliva sampling as an alternative to blood sampling to obtain DNA for molecular diagnostics, genetic genealogy, and research purposes. The DNA quantity, DNA purity (A_260/280), PCR inhibition ratio, and mitochondrial DNA/genomic DNA ratio were measured to compare the extraction methods. The different extraction methods resulted in variable DNA quantity and purity, but there were no significant differences in the efficiency of multiplex PCR and oligomicroarray signals after single-base extension on the arrayed primer extension 2 (APEX-2).     

Application of fluorescence melting curve analysis for dual DNA detection using single peptide nucleic acid probe

Peptide nucleic acid (PNA) is an artificially synthesized polymer. PNA oligomers show greater specificity in binding to complementary DNAs. Using this PNA, fluorescence melting curve analysis (FMCA) for dual detection was established. Genomic DNA of Mycoplasma fermentans and Mycoplasma hyorhinis was used as a template DNA model. By using one PNA probe, M. fermentans and M. hyorhinis could be detected and distinguished simultaneously in a single tube. The developed PNA probe is a dual‐labeled probe with fluorescence and quencher dye. The PNA probe perfectly matches the M. fermentans 16s rRNA gene, with a melting temperature of 72°C. On the other hand, the developed PNA probe resulted in a mismatch with the 16s rRNA gene of M. hyorhinis, with a melting temperature of 44–45°C. The melting temperature of M. hyorhinis was 27–28°C lower than that of M. fermentans. Due to PNA's high specificity, this larger melting temperature gap is easy to create. FMCA using PNA offers an alternative method for specific DNA detection. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:730–735, 2015     

Synergy between DNA polymerases increases polymerase chain reaction inhibitor tolerance in forensic DNA analysis

The success rate of diagnostic polymerase chain reaction (PCR) analysis is lowered by inhibitory substances present in the samples. Recently, we showed that tolerance to PCR inhibitors in crime scene saliva stains can be improved by replacing the standard DNA polymerase AmpliTaq Gold with alternative DNA polymerase-buffer systems (Hedman et al., BioTechniques 47 (2009) 951-958). Here we show that blending inhibitor-resistant DNA polymerase-buffer systems further increases the success rate of PCR for various types of real crime scene samples showing inhibition. For 34 of 42 “inhibited” crime scene stains, the DNA profile quality was significantly improved using a DNA polymerase blend of ExTaq Hot Start and PicoMaxx High Fidelity compared with AmpliTaq Gold. The significance of the results was confirmed by analysis of variance. The blend performed as well as, or better than, the alternative DNA polymerases used separately for all tested sample types. When used separately, the performance of the DNA polymerases varied depending on the nature of the sample. The superiority of the blend is discussed in terms of complementary effects and synergy between the DNA polymerase-buffer systems.     

基于SYBR Green I的双链DNA定量方法

摘要 基于SYBR Green I荧光染料与双链DNA（dsDNA）结合产生荧光的原理,建立一种高精度、高通量的双链DNA 定量方法。将梯度稀释后的基因组DNA及已知浓度的?DNA与等体积的SYBR Green I（4×）充分混合后,利用荧光定量PCR仪采集荧光信号,以ROX（1×）作为校正染料进行定量分析;同时利用紫外分光光度计对样品进行平行测定,比较该方法与紫外分光光度法的检测限与准确度。紫外分光光度法的检测限为2 ng/?l,而SYBR Green I荧光定量法的检测限可达到0.015 ng/?l,并且在0.015~2 ng/?l范围内,SYBR Green I荧光强度与?DNA浓度呈线性关系（R2=0.9999）,比紫外分光光度法灵敏100倍以上,并可准确定量低纯度的DNA样品。此方法具有重复性好、高通量的特点,仅需少量的生物样本即可满足定量要求,为分子生物学研究及临床检验等多个领域提供了一种可靠的dsDNA定量方法。     

Identification and authentication of animal cell culture by polymerase chain reaction amplification and DNA sequencing

Polymerase chain reaction (PCR) amplification and deoxyribonucleic acid (DNA) sequence analysis were used to identify the species origin of cell lines used in a cell culture facility where various cell lines of different species are routinely propagated. The aldolase gene family was selected for PCR amplification because the DNA sequences of this gene are highly conserved over a wide range of animals and humans. A total of 36 cell lines representing 13 different species were selected for this study. The DNA from each cell line was amplified, and PCR products were analyzed by agarose gel electrophoresis. The results showed unique profiles of amplified bands on agarose gels that allowed differentiation among non-closely related species. However, DNA amplification of closely related species, including rat and mouse or human and primate, resulted in similar and indistinguishable banding patterns that could be further differentiated by DNA sequence analysis. These results suggested that aldolase gene amplification coupled with DNA sequence analysis is a useful tool for identification of cell lines and has potential application for use in identification of interspecies cross-contamination.     

Effects of ethidium bromide and SYBR Green I on different polymerase chain reaction systems

In an in-gel polymerase chain reaction (PCR), the generation of a 1750-bp yeast DNA fragment was inhibited when yeast DNA gel-stabs or gel-slices stained with ethidium bromide (EtBr) or SYBR Green I were used. Similar inhibition occurred to a varying degree in the reamplification of PCR fragments in prokaryotic systems. Inclusion of the dyes in PCR resulted in an inhibition at about 10 microg/ml EtBr and at 10,000-20,000-fold dilution of SYBR Green I in all systems. The effect remained unchanged despite increasing the PCR cycles to 40. However, increasing the magnesium chloride concentration did reverse the inhibitory actions, although the PCR specificity was lost. In an unusual observation, we find that, at higher dye concentrations (50 microg/ml EtBr, or thousand fold dilution of SYBR Green I), the input yeast DNA electrophoretic profile is maintained following 25 PCR cycles (despite a denaturation temperature of 94 degrees C). It varied significantly in different DNA systems and was readily reversed by high Mg++ concentrations. It is concluded that, at low Mg++ concentrations, different PCR systems are inhibited to varying extents by intercalating dyes and, in some PCR systems, intercalating dyes at unusually high concentrations maintain input DNA electrophoretic profile.     

Comparison of multiple DNA dyes for real-time PCR: effects of dye concentration and sequence composition on DNA amplification and melting temperature

The importance of real-time polymerase chain reaction (PCR) has increased steadily in clinical applications over the last decade. Many applications utilize SYBR Green I dye to follow the accumulation of amplicons in real time. SYBR Green I has, however, a number of limitations that include the inhibition of PCR, preferential binding to GC-rich sequences and effects on melting curve analysis. Although a few alternative dyes without some of these limitations have been recently proposed, no large-scale investigation into the properties of intercalating dyes has been performed. In this study, we investigate 15 different intercalating DNA dyes for their inhibitory effects on PCR, effects on DNA melting temperature and possible preferential binding to GC-rich sequences. Our results demonstrated that in contrast to the results of SYBR Green I, two intercalating dyes SYTO-13 and SYTO-82 do not inhibit PCR, show no preferential binding to GC rich sequences and do not influence melting temperature, T_m, even at high concentrations. In addition, SYTO-82 demonstrated a 50-fold lower detection limit in a dilution series assay. In conclusion, the properties of SYTO-82 and SYTO-13 will simplify the development of multiplex assays and increase the sensitivity of real-time PCR.     

Comparison of proteases in DNA extraction via quantitative polymerase chain reaction

We compared four proteases in the QIAamp DNA Investigator Kit (Qiagen) to extract DNA for use in multiplex polymerase chain reaction (PCR) assays. The aim was to evaluate alternate proteases for improved DNA recovery as compared with proteinase K for forensic, biochemical research, genetic paternity and immigration, and molecular diagnostic purposes. The Quantifiler Kit TaqMan quantitative PCR assay was used to measure the recovery of DNA from human blood, semen, buccal cells, breastmilk, and earwax in addition to low-template samples, including diluted samples, computer keyboard swabs, chewing gum, and cigarette butts. All methods yielded amplifiable DNA from all samples.     

Microplate fluorescence assay for the quantification of double stranded DNA using SYBR Green I dye

A high-throughput, 96-well microplate fluorescence assay (MFA) was developed for DNA quantification using the double-stranded DNA-binding dye SYBR Green I. Samples mixed with SYBR Green I in the wells of a microtiter plate produced fluorescence in proportion with DNA concentration which was measured using a fluorescence plate reader. The performance characteristics of the assay were compared with spectrophotometric quantification based on ultraviolet absorption and the Hoefer DyNA Quant assay utilizing the fluorescent dye, Hoechst 33258. The MFA accurately quantified different types of DNA over a broad linear dynamic range of concentrations (0.25–2,500 pg/μl), and was not affected by a variety of contaminants in the assay mixture.     

SYBR Green I and TaqMan quantitative real-time polymerase chain reaction methods for the determination of amplification of Plasmodium falciparum multidrug resistance-1 gene (pfmdr1)

The pfmdr1 gene, which encodes P-glycoprotein homolog 1, has been shown to be a reliable marker of resistance for Plasmodium falciparum related to artesunate and mefloquine combination therapy. The aims of this study are to investigate the copy number of pfmdr1 in P. falciparum isolates collected from the 4 malaria-endemic areas of Thailand (Kanchanaburi, Mae Hongson, Ranong, and Tak) along the Thailand-Myanmar (Burma) border (Thai-Myanmar border) by using SYBR Green I and the standard method TaqMan real-time polymerase chain reaction (RT-PCR) and to compare the efficiency (sensitivity and specificity) of SYBR Green I with TaqMan RT-quantitative (q)PCR methods in determining pfmdr1 gene copy number. Ninety-six blood samples were collected onto filter paper from patients with uncomplicated falciparum malaria who attended malaria clinics in the Kanchanaburi (n = 45), Mae Hongson (n = 18), Ranong (n = 11), and Tak (n = 22) provinces in Thailand. Parasite genomic DNA was extracted from dried blood spots by using QIAcube? automated sample preparation. Pfmdr1 gene copy number was determined by TaqMan (63 samples) and SYBR Green I (96 samples) real-time PCR. Seventy-one (74.0%), 14 (14.6%), 10 (10.4%), and 1 (1%) isolates carried 1, 2, 3, and 4 pfmdr1 gene copies, respectively. Forty-three of 48 (89.6%), 6 of 11 (54.5%), and 3 of 4 (75.0%) samples, respectively, showed agreement with results of 1, 2, and 3 pfmdr1 gene copies as determined by both methods. The efficiency of SYBR Green I in identifying pfmdr1 gene copy number was found to be significantly correlated with that of TaqMan. Considering its simplicity and relatively low cost, SYBR Green I RT-qPCR is therefore a promising alternative technique for the determination of pfmdr1 copy number.     

Fluorescence melting curve analysis using self-quenching dual-labeled peptide nucleic acid probes for simultaneously identifying multiple DNA sequences

Previous fluorescence melting curve analysis (FMCA) used intercalating dyes, and this method has restricted application. Therefore, FMCA methods such as probe-based FMCA and molecular beacons were studied. However, the usual dual-labeled probes do not possess adequate fluorescence quenching ability and sufficient specificity, and molecular beacons with the necessary stem structures are hard to design. Therefore, we have developed a peptide nucleic acid (PNA)-based FMCA method. PNA oligonucleotide can have a much higher melting temperature (T_m) value than DNA. Therefore, short PNA probes can have adequate T_m values for FMCA, and short probes can have higher specificity and accuracy in FMCA. Moreover, dual-labeled PNA probes have self-quenching ability via single-strand base stacking, which makes PNA more favorable. In addition, this method can facilitate simultaneous identification of multiple DNA templates. In conventional real-time polymerase chain reaction (PCR), one fluorescence channel can identify only one DNA template. However, this method uses two fluorescence channels to detect three types of DNA. Experiments were performed with one to three different DNA sequences mixed in a single tube. This method can be used to identify multiple DNA sequences in a single tube with high specificity and high clarity.     

A real-time polymerase chain reaction assay for quantification of allele ratios and correction of amplification bias

Allele-specific epigenetic modifications are crucial for several important biological functions, including genomic imprinting and X-inactivation in mammals. Consequently, an ever increasing number of investigations requires accurate quantification of the relative abundance of parental alleles of a specific sequence in a DNA sample. Here, combining the use of polymorphic restriction sites with real-time polymerase chain reaction (PCR) amplification, we describe a simple and quantitative assay to measure allele ratios. The efficiency of the assay was assessed on genomic DNA for several polymorphic restriction sites located in the mouse Igf2/H19 imprinted locus. The assay was also successfully applied to quantify allele ratio in cDNA samples. In addition, we provide an experimental procedure for detection and correction of potential PCR amplification bias which significantly extends the range of application of the assay.     

Accessing single nucleotide polymorphisms in genomic DNA by direct multiplex polymerase chain reaction amplification on oligonucleotide microarrays

This study introduces a DNA microarray-based genotyping system for accessing single nucleotide polymorphisms (SNPs) directly from a genomic DNA sample. The described one-step approach combines multiplex amplification and allele-specific solid-phase PCR into an on-chip reaction platform. The multiplex amplification of genomic DNA and the genotyping reaction are both performed directly on the microarray in a single reaction. Oligonucleotides that interrogate single nucleotide positions within multiple genomic regions of interest are covalently tethered to a glass chip, allowing quick analysis of reaction products by fluorescence scanning. Due to a fourfold SNP detection approach employing simultaneous probing of sense and antisense strand information, genotypes can be automatically assigned and validated using a simple computer algorithm. We used the described procedure for parallel genotyping of 10 different polymorphisms in a single reaction and successfully analyzed more than 100 human DNA samples. More than 99% of genotype data were in agreement with data obtained in control experiments with allele-specific oligonucleotide hybridization and capillary sequencing. Our results suggest that this approach might constitute a powerful tool for the analysis of genetic variation.