Sequence-dependent mechanics of single DNA molecules

Atomic force microscope-based single-molecule force spectroscopy was employed to measure sequence-dependent mechanical properties of DNA by stretching individual DNA double strands attached between a gold surface and an AFM tip. We discovered that in lambda-phage DNA the previously reported B-S transition, where 'S' represents an overstretched conformation, at 65 pN is followed by a nonequilibrium melting transition at 150 pN. During this transition the DNA is split into single strands that fully recombine upon relaxation. The sequence dependence was investigated in comparative studies with poly(dG-dC) and poly(dA-dT) DNA. Both the B-S and the melting transition occur at significantly lower forces in poly(dA-dT) compared to poly(dG-dC). We made use of the melting transition to prepare single poly(dG-dC) and poly(dA-dT) DNA strands that upon relaxation reannealed into hairpins as a result of their self-complementary sequence. The unzipping of these hairpins directly revealed the base pair-unbinding forces for G-C to be 20 +/- 3 pN and for A-T to be 9 +/- 3 pN.     

Measuring the interaction forces between protein inclusion bodies and an air bubble using an atomic force microscope

Interaction forces between protein inclusion bodies and an air bubble have been quantified using an atomic force microscope (AFM). The inclusion bodies were attached to the AFM tip by covalent bonds. Interaction forces measured in various buffer concentrations varied from 9.7 nN to 25.3 nN (+/- 4-11%) depending on pH. Hydrophobic forces provide a stronger contribution to overall interaction force than electrostatic double layer forces. It also appears that the ionic strength affects the interaction force in a complex way that cannot be directly predicted by DLVO theory. The effects of pH are significantly stronger for the inclusion body compared to the air bubble. This study provides fundamental information that will subsequently facilitate the rational design of flotation recovery system for inclusion bodies. It has also demonstrated the potential of AFM to facilitate the design of such processes from a practical viewpoint.     

Mechanical design of proteins studied by single-molecule force spectroscopy and protein engineering

Mechanical unfolding and refolding may regulate the molecular elasticity of modular proteins with mechanical functions. The development of the atomic force microscopy (AFM) has recently enabled the dynamic measurement of these processes at the single-molecule level. Protein engineering techniques allow the construction of homomeric polyproteins for the precise analysis of the mechanical unfolding of single domains. alpha-Helical domains are mechanically compliant, whereas beta-sandwich domains, particularly those that resist unfolding with backbone hydrogen bonds between strands perpendicular to the applied force, are more stable and appear frequently in proteins subject to mechanical forces. The mechanical stability of a domain seems to be determined by its hydrogen bonding pattern and is correlated with its kinetic stability rather than its thermodynamic stability. Force spectroscopy using AFM promises to elucidate the dynamic mechanical properties of a wide variety of proteins at the single molecule level and provide an important complement to other structural and dynamic techniques (e.g., X-ray crystallography, NMR spectroscopy, patch-clamp).     

Can an Atomic Force Microscope Sequence DNA Using a Nanopore?

R. Bension has proposed that single molecules of DNA could be sequenced rapidly, in long sequential reads, by reading off the force required to pull a tightly fitting molecular ring over each base in turn using an atomic force microscope (AFM). We present molecular dynamics simulations that indicate that pulling DNA very rapidly (m/s) could generate large force peaks as each base is passed (∼1 nN) with significant differences (∼0.5 nN) between purine and pyrimidine. These speeds are six orders of magnitude faster than could be read out by a conventional AFM, and extending the calculations to accessible speeds using Kramers’ theory shows that thermal fluctuations dominate the process with the result that purine and pyrimidine cannot be distinguished with the pulling speeds attained by current AFM technology.     

Biophysical approaches for studying the integrity and function of tight junctions

Cell-cell adhesion is an extremely important phenomenon as it influences several biologically important processes such as inflammation, cell migration, proliferation, differentiation and even cancer metastasis. Furthermore, proteins involved in cell-cell adhesion are also important from the perspective of facilitating better drug delivery across epithelia. The adhesion forces imparted by proteins involved in cell-cell adhesion have been the focus of research for sometime. However, with the advent of nanotechnological techniques such as the atomic force microscopy (AFM), we can now quantitatively probe these adhesion forces not only at the cellular but also molecular level. Here, we review the structure and function of tight junction proteins, highlighting some mechanistic studies performed to quantify the adhesion occurring between these proteins and where possible their association with human diseases. In particular, we will highlight two important experimental techniques, namely the micropipette step pressure technique and the AFM that allow us to quantify these adhesion forces at both the cellular and molecular levels, respectively.     

Mechanical stability of single DNA molecules

Using a modified atomic force microscope (AFM), individual double-stranded (ds) DNA molecules attached to an AFM tip and a gold surface were overstretched, and the mechanical stability of the DNA double helix was investigated. In lambda-phage DNA the previously reported B-S transition at 65 piconewtons (pN) is followed by a second conformational transition, during which the DNA double helix melts into two single strands. Unlike the B-S transition, the melting transition exhibits a pronounced force-loading-rate dependence and a marked hysteresis, characteristic of a nonequilibrium conformational transition. The kinetics of force-induced melting of the double helix, its reannealing kinetics, as well as the influence of ionic strength, temperature, and DNA sequence on the mechanical stability of the double helix were investigated. As expected, the DNA double helix is considerably destabilized under low salt buffer conditions (相似文献   

Membrane-based actuation for high-speed single molecule force spectroscopy studies using AFM

Atomic force microscopy (AFM)-based dynamic force spectroscopy of single molecular interactions involves characterizing unbinding/unfolding force distributions over a range of pulling speeds. Owing to their size and stiffness, AFM cantilevers are adversely affected by hydrodynamic forces, especially at pulling speeds >10 μm/s, when the viscous drag becomes comparable to the unbinding/unfolding forces. To circumvent these adverse effects, we have fabricated polymer-based membranes capable of actuating commercial AFM cantilevers at speeds ≥100 μm/s with minimal viscous drag effects. We have used FLUENT^®, a computational fluid dynamics (CFD) software, to simulate high-speed pulling and fast actuation of AFM cantilevers and membranes in different experimental configurations. The simulation results support the experimental findings on a variety of commercial AFM cantilevers and predict significant reduction in drag forces when membrane actuators are used. Unbinding force experiments involving human antibodies using these membranes demonstrate that it is possible to achieve bond loading rates ≥10⁶ pN/s, an order of magnitude greater than that reported with commercial AFM cantilevers and systems.     

Long lifetime of hydrogen-bonded DNA basepairs by force spectroscopy

Electron-tunneling data suggest that a noncovalently-bonded complex of three molecules, two recognition molecules that present hydrogen-bond donor and acceptor sites via a carboxamide group, and a DNA base, remains bound for seconds. This is surprising, given that imino-proton exchange rates show that basepairs in a DNA double helix open on millisecond timescales. The long lifetime of the three-molecule complex was confirmed using force spectroscopy, but measurements on DNA basepairs are required to establish a comparison with the proton-exchange data. Here, we report on a dynamic force spectroscopy study of complexes between the bases adenine and thymine (A-T, two-hydrogen bonds) and 2-aminoadenine and thymine (2AA-T, three-hydrogen bonds). Bases were tethered to an AFM probe and mica substrate via long, covalently linked polymer tethers. Data for bond-survival probability versus force and the rupture-force distributions were well fitted by the Bell model. The resulting lifetime of the complexes at zero pulling force was ~2 s for two-hydrogen bonds (A-T) and ~4 s for three-hydrogen bonds (2AA-T). Thus, DNA basepairs in an AFM pulling experiment remain bonded for long times, even without the stabilizing influence of base-stacking in a double helix. This result suggests that the pathways for opening, and perhaps the open states themselves, are very different in the AFM and proton-exchange measurements.     

The NTA-His6 bond is strong enough for AFM single-molecular recognition studies

There is a need in current atomic force microscopy (AFM) molecular recognition studies for generic methods for the stable, functional attachment of proteins on tips and solid supports. In the last few years, the site-directed nitrilotriacetic acid (NTA)-polyhistidine (Hisn) system has been increasingly used towards this goal. Yet, a crucial question in this context is whether the NTA-Hisn bond is sufficiently strong for ensuring stable protein immobilization during force spectroscopy measurements. Here, we measured the forces between AFM tips modified with NTA-terminated alkanethiols and solid supports functionalized with His6-Gly-Cys peptides in the presence of Ni2+. The force histogram obtained at a loading rate of 6600 pN s(-1) showed three maxima at rupture forces of 153 +/- 57 pN, 316 +/- 50 pN and 468 +/- 44 pN, that we attribute primarily to monovalent and multivalent interactions between a single His6 moiety and one, two and three NTA groups, respectively. The measured forces are well above the 50-100 pN unbinding forces typically observed by AFM for receptor-ligand pairs. The plot of adhesion force versus log (loading rate) revealed a linear regime, from which we deduced a kinetic off-rate constant of dissociation, k(off) approximately 0.07 s(-1). This value is in the range of that estimated for the multivalent interaction involving two NTA, using fluorescence measurements, and may account for an increased binding stability of the NTA-His6 bond. We conclude that the NTA-His6 system is a powerful, well-suited platform for the stable, oriented immobilization of proteins in AFM single-molecule studies.     

Atomic force microscope-based single-molecule force spectroscopy of RNA unfolding

Single-molecule force spectroscopy (SMFS) using the atomic force microscope (AFM) has emerged as an important tool for probing biomolecular interaction and exploring the forces, dynamics, and energy landscapes that underlie function and specificity of molecular interaction. These studies require attaching biomolecules on solid supports and AFM tips to measure unbinding forces between individual binding partners. Herein we describe efficient and robust protocols for probing RNA interaction by AFM and show their value on two well-known RNA regulators, the Rev-responsive element (RRE) from the HIV-1 genome and an adenine-sensing riboswitch. The results show the great potential of AFM–SMFS in the investigation of RNA molecular interactions, which will contribute to the development of bionanodevices sensing single RNA molecules.     

Mechanical Characterization of Protein L in the Low-Force Regime by Electromagnetic Tweezers/Evanescent Nanometry

Mechanical manipulation at the single molecule level of proteins exhibiting mechanical stability poses a technical challenge that has been almost exclusively approached by atomic force microscopy (AFM) techniques. However, due to mechanical drift limitations, AFM techniques are restricted to experimental recordings that last less than a minute in the high-force regime. Here we demonstrate a novel combination of electromagnetic tweezers and evanescent nanometry that readily captures the forced unfolding trajectories of protein L at pulling forces as low as 10 ∼ 15 pN. Using this approach, we monitor unfolding and refolding cycles of the same polyprotein for a period of time longer than 30 min. From such long-lasting recordings, we obtain ensemble averages of unfolding step sizes and rates that are consistent with single-molecule AFM data obtained at higher stretching forces. The unfolding kinetics of protein L at low stretching forces confirms and extends the observations that the mechanical unfolding rate is exponentially dependent on the pulling force within a wide range of stretching forces spanning from 13 pN up to 120 pN. Our experiments demonstrate a novel approach for the mechanical manipulation of single proteins for extended periods of time in the low-force regime.     

Analysis of DNA interactions using single-molecule force spectroscopy

Protein–DNA interactions are involved in many biochemical pathways and determine the fate of the corresponding cell. Qualitative and quantitative investigations on these recognition and binding processes are of key importance for an improved understanding of biochemical processes and also for systems biology. This review article focusses on atomic force microscopy (AFM)-based single-molecule force spectroscopy and its application to the quantification of forces and binding mechanisms that lead to the formation of protein–DNA complexes. AFM and dynamic force spectroscopy are exciting tools that allow for quantitative analysis of biomolecular interactions. Besides an overview on the method and the most important immobilization approaches, the physical basics of the data evaluation is described. Recent applications of AFM-based force spectroscopy to investigate DNA intercalation, complexes involving DNA aptamers and peptide– and protein–DNA interactions are given.     

FM-AFM constant height imaging and force curves: high resolution study of DNA-tip interactions

Interaction of the atomic force microscopy (AFM) tip with the sample can be invasive for soft samples. Frequency Modulation (FM) AFM is gentler because it allows scanning in the non‐contact regime where only attractive forces exist between the tip and the sample, and there is no sample compression. Recently, FM‐AFM was used to resolve the atomic structure of single molecules of pentacene and of carbon nanotubes. We are testing similar FM‐AFM‐based approaches to study biological samples. We present FM‐AFM experiments on dsDNA deposited on 3‐aminopropyltriethoxysilane modified mica in ultra high vacuum. With flexible samples such as DNA, the substrate flatness is a sub‐molecular resolution limiting factor. Non‐contact topographic images of DNA show variations that have the periodicity of the right handed helix of B‐form DNA – this is an unexpected result as dehydrated DNA is thought to assume the A‐form structure. Frequency shift maps at constant height allow working in the non‐monotonic frequency shift range, show a rich contrast that changes significantly with the tip‐sample separation, and show 0.2 to 0.4 nm size details on DNA. Frequency shift versus distance curves acquired on DNA molecules and converted in force curves show that for small molecules (height < 2.5 nm), there is a contribution to the interaction force from the substrate when the tip is on top of the molecules. Our data shine a new light on dehydrated and adsorbed DNA behavior. They show a longer tip‐sample interaction distance. These experiments may have an impact on nanotechnological DNA applications in non‐physiological environments such as DNA based nanoelectronics and nanotemplating. Copyright © 2012 John Wiley & Sons, Ltd.     

Observing single biomolecules at work with the atomic force microscope

Progress in the application of the atomic force microscope (AFM) to imaging and manipulating biomolecules is the result of improved instrumentation, sample preparation methods and image acquisition conditions. Biological membranes can be imaged in their native state at a lateral resolution of 0.5-1 nm and a vertical resolution of 0. 1-0.2 nm. Conformational changes that are related to functions can be resolved to a similar resolution, complementing atomic structure data acquired by other methods. The unique capability of the AFM to directly observe single proteins in their native environments provides insights into the interactions of proteins that form functional assemblies. In addition, single molecule force spectroscopy combined with single molecule imaging provides unprecedented possibilities for analyzing intramolecular and intermolecular forces. This review discusses recent examples that illustrate the power of AFM.     

The measurement of exonuclease activities by atomic force microscopy

We have applied atomic force microscopy (AFM) to the measurement of BAL 31 nuclease activities. BAL 31 nuclease, a species of exonuclease, is used to remove unwanted sequences from the termini of DNA before cloning. For cutting out only the appropriate sequences, it is important to know the nuclease properties, such as digestion speed and the distribution of the lengths of the digested DNA. AFM was used to obtain accurate measurements on the lengths of DNA fragments before and after BAL 31 nuclease digestion. We analyzed 4 DNAs with known number of base pairs (288, 778, 1818, and 3162 base pairs) for correlating the contour length measured by AFM with the number of base pairs under the deposition conditions used. We used this calibration for analyzing DNA degradation by BAL 31 nuclease from the AFM measurement of contour lengths of digested DNAs. In addition, the distribution of digested DNA could be analyzed in more detail by AFM than by electrophoresis, because digested DNA were measured as a population by electrophoresis, but were measured individually by AFM. These results show that AFM will be a useful new technique for measuring nuclease activities. Received: 8 August 1997 / Accepted: 10 September 1997     

AFM Imaging and Analysis of Electrostatic Double Layer Forces on Single DNA Molecules

Electrical double layer (EDL) forces develop between charged surfaces immersed in an electrolyte solution. Biological material surrounded by its physiological medium constitutes a case where these forces play a major role. Specifically, this work is focused on the study of the EDL force exerted by DNA molecules, a standard reference for the study of single biomolecules of nanometer size. The molecules deposited on plane substrates have been characterized by means of the atomic force microscope operated in the force spectroscopy imaging mode. Force spectroscopy imaging provides images of the topography of the DNA molecules, and of the EDL force spectrum. Due to the size of the molecule being much smaller than that of the tip, both the tip-substrate and tip-molecule interactions need to be considered in the analysis of the experimental results. We solve this problem by linearly superposing the two contributions. EDL force images are presented where DNA molecules are clearly resolved. The lateral resolution of the EDL force is discussed and compared with that of the topography. The method also allows the estimation of the DNA surface charge density, thereby obtaining reasonable values.     

Atomic force microscopy in biology: technology and techniques

In this review, I describe the biological applications of the atomic force microscope (AFM). The historical background and the development of the microscope are described. The AFM can operate in many different modes relevant to biological systems including topography, chemical analysis, and forces relevant at the biological length scale (single cell to DNA dimensions and pico to nano Newton forces). A limited number of examples from the literature are described to illustrate some of the many capabilities of this microscope. The aim is to give an introduction of the technique to the inexperienced in this rapidly growing field.     

Atomic force microscopy in biology: technology and techniques.

In this review, I describe the biological applications of the atomic force microscope (AFM). The historical background and the development of the microscope are described. The AFM can operate in many different modes relevant to biological systems including topography, chemical analysis, and forces relevant at the biological length scale (single cell to DNA dimensions and pico to nano Newton forces). A limited number of examples from the literature are described to illustrate some of the many capabilities of this microscope. The aim is to give an introduction of the technique to the inexperienced in this rapidly growing field.