Investigation of impact loading rate effects on the ligamentous cervical spinal load-partitioning using finite element model of functional spinal unit C2–C3

The cervical spine functions as a complex mechanism that responds to sudden loading in a unique manner, due to intricate structural features and kinematics. The spinal load-sharing under pure compression and sagittal flexion/extension at two different impact rates were compared using a bio-fidelic finite element (FE) model of the ligamentous cervical functional spinal unit (FSU) C2–C3. This model was developed using a comprehensive and realistic geometry of spinal components and material laws that include strain rate dependency, bone fracture, and ligament failure. The range of motion, contact pressure in facet joints, failure forces in ligaments were compared to experimental findings. The model demonstrated that resistance of spinal components to impact load is dependent on loading rate and direction. For the loads applied, stress increased with loading rate in all spinal components, and was concentrated in the outer intervertebral disc (IVD), regions of ligaments to bone attachment, and in the cancellous bone of the facet joints. The highest stress in ligaments was found in capsular ligament (CL) in all cases. Intradiscal pressure (IDP) in the nucleus was affected by loading rate change. It increased under compression/flexion but decreased under extension. Contact pressure in the facet joints showed less variation under compression, but increased significantly under flexion/extension particularly under extension. Cancellous bone of the facet joints region was the only component fractured and fracture occurred under extension at both rates. The cervical ligaments were the primary load-bearing component followed by the IVD, endplates and cancellous bone; however, the latter was the most vulnerable to extension as it fractured at low energy impact.     

Nonlinear finite element analysis of anular lesions in the L4/5 intervertebral disc

Degenerate intervertebral discs exhibit both material and structural changes. Structural defects (lesions) develop in the anulus fibrosus with age. While degeneration has been simulated in numerous previous studies, the effects of structural lesions on disc mechanics are not well known. In this study, a finite element model (FEM) of the L4/5 intervertebral disc was developed in order to study the effects of anular lesions and loss of hydrostatic pressure in the nucleus pulposus on the disc mechanics. Models were developed to simulate both healthy and degenerate discs. Degeneration was simulated with either rim, radial or circumferential anular lesions and by equating nucleus pressure to zero. The anulus fibrosus ground substance was represented as a nonlinear incompressible material using a second-order polynomial, hyperelastic strain energy equation. Hyperelastic material parameters were derived from experimentation on sheep discs. Endplates were assumed to be rigid, and annulus lamellae were assumed to be vertical in the unloaded state. Loading conditions corresponding to physiological ranges of rotational motion were applied to the models and peak rotation moments compared between models. Loss of nucleus pulposus pressure had a much greater effect on the disc mechanics than the presence of anular lesions. This indicated that the development of anular lesions alone (prior to degeneration of the nucleus) has minimal effect on disc mechanics, but that disc stiffness is significantly reduced by the loss of hydrostatic pressure in the nucleus. With the degeneration of the nucleus, the outer innervated anulus or surrounding osteo-ligamentous anatomy may therefore experience increased strains.     

Topographical variation in the distributions of versican,aggrecan and perlecan in the foetal human spine reflects their diverse functional roles in spinal development

We evaluated the immunohistochemical distribution of three major proteoglycans of cartilage, i.e., aggrecan, versican and perlecan vis-a-vis collagens I and II in the developing human spine of first-trimester foetuses. Aggrecan and perlecan were prominently immunolocalised in the cartilaginous vertebral body rudiments and to a lesser extent within the foetal intervertebral disc. In contrast, versican was only expressed in the developing intervertebral disc interspace. Using domain-specific monoclonal antibodies against the various modules of versican, we discovered the V0 isoform as the predominant form present. Versican immunolocalisations conducted with antibodies directed to epitopes in its N and C termini and GAG-α and GAG-β core protein domains provided evidence that versican in the nucleus pulposus was either synthesised devoid of a G3 domain or this domain was proteolytically removed in situ. The V0 versican isoform was localised with prominent fibrillar components in the annular lamellae of the outer annulus fibrosus. Perlecan was a notable pericellular proteoglycan in the annulus fibrosus and nucleus pulposus but poorly immunolocalised in the marginal tissues of the developing intervertebral disc, apparently delineating the intervertebral disc–vertebral body interface region destined to become the cartilaginous endplate in the mature intervertebral disc. The distribution of collagens I and II in the foetal spine was mutually exclusive with type I present in the outer annulus fibrosus, marginal tissues around the vertebral body rudiment and throughout the developing intervertebral disc, and type II prominent in the vertebral rudiment, absent in the outer annulus fibrosus and diffusely distributed in the inner annulus fibrosus and nucleus pulposus. Collectively, our findings suggest the existence of an intricate and finely balanced interplay between various proteoglycans and collagens and the spinal cell populations which synthesise and assemble these components during spinal development.     

Changes in intervertebral disc morphology persist 5 mo after 21-day bed rest

As part of the nutrition-countermeasures (NUC) study in Cologne, Germany in 2010, seven healthy male subjects underwent 21 days of head-down tilt bed rest and returned 153 days later to undergo a second bout of 21-day bed rest. As part of this model, we aimed to examine the recovery of the lumbar intervertebral discs and muscle cross-sectional area (CSA) after bed rest using magnetic resonance imaging and conduct a pilot study on the effects of bed rest in lumbar muscle activation, as measured by signal intensity changes in T(2)-weighted images after a standardized isometric spinal extension loading task. The changes in intervertebral disc volume, anterior and posterior disc height, and intervertebral length seen after bed rest did not return to prebed-rest values 153 days later. While recovery of muscle CSA occurred after bed rest, increases (P ≤ 0.016) in multifidus, psoas, and quadratus lumborum muscle CSA were seen 153 days after bed rest. A trend was seen for greater activation of the erector spinae and multifidus muscles in the standardized loading task after bed rest. Greater reductions of multifidus and psoas CSA muscle and greater increases in multifidus signal intensity with loading were associated with incidence of low back pain in the first 28 days after bed rest (P ≤ 0.044). The current study contributes to our understanding of the recovery of the lumbar spine after 21-day bed rest, and the main finding was that a decrease in spinal extensor muscle CSA recovers within 5 mo after bed rest but that changes in the intervertebral discs persist.     

The effect of passive vertebral rotation on pressure in the nucleus pulposus

To study the immediate effects of axial rotation on the intervertebral disc, six pig cadaver lumbar functional spinal units were exposed to rotations of up to 2 degrees, while disc height and intradiscal pressure were measured. The results showed that rotary movements are capable of causing an immediate increase in disc height and drop in nucleus pressure. However, the long-term effects were opposite in direction.     

Lumbar spine angles and intervertebral disc characteristics with end-range positions in three planes of motion in healthy people using upright MRI

Understanding changes in lumbar spine (LS) angles and intervertebral disc (IVD) behavior in end-range positions in healthy subjects can provide a basis for developing more specific LS models and comparing people with spine pathology. The purposes of this study are to quantify 3D LS angles and changes in IVD characteristics with end-range positions in 3 planes of motion using upright MRI in healthy people, and to determine which intervertebral segments contribute most in each plane of movement. Thirteen people (average age = 24.4 years, range 18–51 years; 9 females; BMI = 22.4 ± 1.8 kg/m²) with no history of low back pain were scanned in an upright MRI in standing, sitting flexion, sitting axial rotation (left, right), prone on elbows, prone extension, and standing lateral bending (left, right). Global and local intervertebral LS angles were measured. Anterior-posterior length of the IVD and location of the nucleus pulposus was measured. For the sagittal plane, lower LS segments contribute most to change in position, and the location of the nucleus pulposus migrated from a more posterior position in sitting flexion to a more anterior position in end-range extension. For lateral bending, the upper LS contributes most to end-range positions. Small degrees of intervertebral rotation (1–2°) across all levels were observed for axial plane positions. There were no systematic changes in IVD characteristics for axial or coronal plane positions.     

Transient Calretinin Expression during Intervertebral Disc Formation of the Chick Embryo

Calretinin immunoreactivity was localized during chick embryonic cervical spine development from day 4 until day 16. A transitory expression of calretinin could be seen from embryonic day 5 to embryonic day 15 in the mesenchymal cells forming the intervertebral disc. Calretinin was most abundant at embryonic day 8 when a maximal proliferation of cells occurred.
At embryonic day 12, calretinin positive fibroblasts were located along the fibers forming the annulus fibrosus. At embryonic day 16, calretinin immunoreactivity could no more be detected in the cervical column. In conclusion, an intracellular calcium binding proteins belonging to the calmodulin/troponin C superfamily, appeared to be a marker for the disc formation.     

Direction-dependent constriction flow in a poroelastic solid: the intervertebral disc valve

We hypothesize that a direction-dependent flow resistance exists in the intervertebral disc due to constriction flow in the cartilage endplates. A comparison of the hydrostatic pressure in the nucleus of the healthy intervertebral disc during daily loading with the relatively low osmotic swelling pressure during rest, suggests the necessity of such direction-dependent flow resistance to ensure that all the fluid exuded from the disc during loading is recovered during rest. A physical model demonstrating the direction-dependent resistance of constriction flow in a poroelastic solid is presented. A finite element model was developed and validated against this physical model. The finite element model showed that decrease of the constriction hole area not only increases the resistance to fluid flow, but also causes the direction-dependency of flow resistance to decrease. Through this mechanism, endplate sclerosis could affect normal daily fluid exchange in the intervertebral disc, resulting in decreased mass transport and/or dehydration of the disc.     

The role of the nucleus pulposus in neutral zone human lumbar intervertebral disc mechanics

To study the effect of denucleation on the mechanical behavior of the human lumbar intervertebral disc through a 2mm incision, two groups of six human cadaver lumbar spinal units were tested in axial compression, axial rotation, lateral bending and flexion/extension after incremental steps of "partial" denucleation. Neutral zone, range of motion, stiffness, intradiscal pressure and energy dissipation were measured; the results showed that the contribution of the nucleus pulposus to the mechanical behavior of the intervertebral disc was more dominant through the neutral zone than at the farther limits of applied loads and moments.     

Immunohistochemistry of chondromodulin-I in the human intervertebral discs with special reference to the degenerative changes

The expression of the matrix protein chondromodulin-I has been studied in human intervertebral discs of 101 people using immunohistochemical analyses. The purpose of this report is to present data on the metabolic changes that were found to occur in the chondrocytes of intervertebral discs during development and aging. Chondromodulin-I was highly expressed during the gestational period and gradually decreased after maturation. It was detected in both the extracellular matrix and chondrocytes in the zone of hypertrophic cartilage, the zone of proliferative cartilage and the zone of resting cartilage in fetal discs. It was also present in the annulus fibrosus, nucleus pulposus and end-plate cartilage in mature discs. In degenerative discs, chondromodulin-I immunoreactivity tended to be elevated in the remaining chondrocytes. Our findings suggest that the expression of the protein is developmentally regulated and upregulated through a defense mechanism against the degenerative processes of the aged intervertebral disc.     

Three-dimensional inhomogeneous triphasic finite-element analysis of physical signals and solute transport in human intervertebral disc under axial compression

A 3D inhomogeneous finite-element model for charged hydrated soft tissues containing charged/uncharged solutes was developed and applied to analyze the mechanical, chemical, and electrical signals within the human intervertebral disc during an axial unconfined compression. The effects of tissue properties and boundary conditions on the physical signals and the transport of fluid and solute were investigated. The numerical simulation showed that, during disc compression, the fluid pressurization and the effective (von Misses) solid stress were more pronounced in the annulus fibrosus (AF) region near the interface between AF and nucleus pulposus (NP). In NP, the distributions of the fluid pressure, effective stress, and electrical potential were more uniform than those in AF. The electrical signals were very sensitive to fixed charge density. Changes in material properties of NP (water content, fixed charge density, and modulus) affected fluid pressure, electrical potential, effective stress, and solute transport in the disc. This study is important for understanding disc biomechanics, disc nutrition, and disc mechanobiology.     

Biomechanical implications of lumbar spinal ligament transection

Many lumbar spine surgeries either intentionally or inadvertently damage or transect spinal ligaments. The purpose of this work was to quantify the previously unknown biomechanical consequences of isolated spinal ligament transection on the remaining spinal ligaments (stress transfer), vertebrae (bone remodelling stimulus) and intervertebral discs (disc pressure) of the lumbar spine. A finite element model of the full lumbar spine was developed and validated against experimental data and tested in the primary modes of spinal motion in the intact condition. Once a ligament was removed, stress increased in the remaining spinal ligaments and changes occurred in vertebral strain energy, but disc pressure remained similar. All major biomechanical changes occurred at the same spinal level as the transected ligament, with minor changes at adjacent levels. This work demonstrates that iatrogenic damage to spinal ligaments disturbs the load sharing within the spinal ligament network and may induce significant clinically relevant changes in the spinal motion segment.     

A magnetic resonance imaging framework for quantifying intervertebral disc deformation in vivo: Reliability and application to diurnal variations in lumbar disc shape

Low back pain is a significant socioeconomic burden in the United States and lumbar intervertebral disc degeneration is frequently implicated as a cause. The discs play an important mechanical role in the spine, yet the relationship between disc function and back pain is poorly defined. The objective of this work was to develop a technique using magnetic resonance imaging (MRI) and three-dimensional modeling to measure in vivo disc deformations. Using this method, we found that disc geometry was measurable with precision less than the in-plane dimensions of a voxel (≈100 µm, 10% of the MRI pixel size). Furthermore, there was excellent agreement between mean disc height, disc perimeter, disc volume and regional disc height measurements for multiple trials from an individual rater (standard deviation <3.1% across all measurements) and between mean height, perimeter, and volume measurements made by two independent raters (error <1.5% across all measurements). We then used this measurement system to track diurnal deformations in the L5-S1 disc in a young, healthy population (n = 8; age 24.1 ± 3.3 yrs; 2 M/6F). We measured decreases in the mean disc height (−8%) and volume (−9%) with no changes in perimeter over an eight-hour workday. We found that the largest height losses occurred in the posterior (−13%) and posterior-lateral (−14%) regions adjacent to the outer annulus fibrosus. Diurnal annulus fibrosus (AF) strains induced by posterior and posterior-lateral height loss may increase the risk for posterior disc herniation or posterior AF tears. These preliminary findings lay a foundation for determining how deviations from normal deformations may contribute to back pain.     

Sox9治疗兔椎间盘退变的效果及机制研究

目的:探究Sox9用于治疗椎间盘退变的效果及调控机制。方法:将Ad-sox9和Ad-GFP各20μL分别转染至椎间盘退变兔的髓核组织中,转染后3、7、30、60天取材,采用免疫组化、免疫荧光和MRI等研究方法检测椎间盘髓核组织中II型胶原、蛋白多糖的表达情况,并分析对椎间盘退变的改善情况。结果:免疫组化染色显示sox9组中椎间盘髓核组织中II型胶原、蛋白多糖的表达明显升高,MRI显示sox9组椎间盘T2像信号有明显改善(P<0.05)。结论:体内转染腺病毒介导的sox9基因能够增加椎间盘内II型胶原和蛋白多糖的表达,并抑制椎间盘的退变进程。     

Osmosis and viscoelasticity both contribute to time-dependent behaviour of the intervertebral disc under compressive load: A caprine in vitro study

The mechanical behaviour of the intervertebral disc highly depends on the content and transport of interstitial fluid. It is unknown, however, to what extent the time-dependent behaviour can be attributed to osmosis. Here we investigate the effect of both mechanical and osmotic loading on water content, nucleus pressure and disc height. Eight goat intervertebral discs, immersed in physiological saline, were subjected to a compressive force with a pressure needle inserted in the nucleus. The loading protocol was: 10 N (6 h); 150 N (42 h); 10 N (24 h). Half-way the 150 N-phase (24 h), we eliminated the osmotic gradient by adding 26% poly-ethylene glycol to the surrounding fluid. For 62 additional discs, we determined the water content of both nucleus and annulus after 6, 24, 48, or 72 h. The compressive load was initially counterbalanced by the hydrostatic pressure in the nucleus. The load forced 4.3% of the water out of the nucleus, which reduced nucleus pressure by 44(±6)%. Reduction of the osmotic gradient disturbed the equilibrium disc height, and a significant loss of annulus water content was found. Remarkably, pressure and water content of the nucleus pulposus remained unchanged. This shows that annulus water content is important in the response to axial loading. After unloading, in the absence of an osmotic gradient, there was substantial viscoelastic recovery of 53(±11)% of the disc height, without a change in water content. However, for restoration of the nucleus pressure and for full restoration of disc height, restoration of the osmotic gradient was needed.     

Diurnal variations in intervertebral disc height affect spine flexibility,intradiscal pressure and contact compressive forces in the facet joints

Diurnal changes of intervertebral disc height are caused by high compressive loading during the day, which expulses fluid from the disc, and by osmotic pressure, which imbibes fluid into the disc at low loading. The aim of the present study was to determine the magnitude of diurnal changes in spine flexibility, intradiscal pressures and contact forces in the facet joints. A validated osseoligamentous finite element model of the lumbar spine was used to determine these quantities for morning and evening situations. Disc height varied by 10% for these two situations. Spine flexibility and facet joint forces were markedly higher in the evening than in the morning. Intradiscal pressures were higher in the morning than in the evening. The different spine flexibilities in the morning and evening should be taken into account during kinematical measurements. Predicted facet joint forces may be used for the designing and pre-clinical testing of artificial facet joint replacements.     

颈椎后路复位CPSS内固定治疗下颈椎骨折脱位伴关节突绞锁的临床效果分析

目的:探讨单纯颈椎后路复位CPSS内固定治疗下颈椎骨折脱位伴关节突绞锁的临床效果。方法:选择2010年1月~2014年10月在我院接受治疗的下颈椎骨折脱位伴关节突绞锁患者95例,根据手术方法不同分为研究组与对照组。研究组采用单纯颈椎后路复位CPSS内固定治疗,而对照组采用单纯颈椎前路复位CPSS内固定治疗。观察并比较两组患者的手术效果及神经功能分级(ASIA)。结果:两组术前ASIA分级B、C、D的患者治疗后神经功能恢复较佳,A级患者治疗后仍为A级,但较术前明显改善。两组患者治疗前的ASAI等级在治疗后均有改善,研究组改善程度更明显,差异有统计学意义(P0.05)。两组均未出现断钉或螺钉松动等并发症(P0.05);两组患者治疗后椎间隙显著增宽,且后路组优于前路组,差异有统计学意义(P0.05)。与术前比较,两组术后颈椎后凸畸形Cobb角均明显改善(P0.05),但组间比较差异无统计学意义(P0.05)。结论:单纯颈椎后路复位CPSS内固定治疗下颈椎骨折脱位伴关节突绞锁的临床效果显著,患者神经功能得到明显改善,且术后并发症少,值得推广应用。     

Type X collagen in the human invertebral disc: an indication of repair or remodelling?

The short-chained type X collagen was once thought to be produced exclusively by hypertrophic chondrocytes during endochondral ossification. More recently, however, it has been found elsewhere, for example in articular cartilage. In the present study, the occurrence of type X collagen in the intervertebral disc has been investigated. Human disc tissues of varying pathologies were examined for the presence of type X collagen and expression of alpha1(X) mRNA by immunohistochemistry and in situ hybridization respectively. All samples of disc contained areas that were immunoreactive but to varying extents. In the disc itself, staining for the protein and alpha1(X) mRNA was seen frequently associated with cells of the nucleus pulposus, which were large and of hypertrophic appearance, most commonly found in degenerate discs, and also in areas of disorganized architecture, such as clefts. In addition, type X collagen, both protein and mRNA, was found in regions of the cartilage end-plate, which calcify ectopically in scoliotic patients. We suggest that type X collagen production may be a response of disc tissue cells to a stimulus, such as altered loading. © 1998 Chapman & Hall     

椎间孔镜下髓核摘除术对腰椎间盘突出患者CK、CRP及腰椎功能恢复的影响

目的:探讨椎间孔镜下髓核摘除术对椎间盘突出患者肌酸激酶(CK)、C反应蛋白(CRP)及腰椎功能恢复的影响.方法:选择2016年10月-2018年8月在我院接受治疗的90例腰椎间盘突出患者,采用抽签法分为椎间孔镜组(n=45)和后路切开组(n=45).对照组给予后路切开髓核摘除手术治疗,观察组给予椎间孔镜下髓核摘除治疗....