Cell Surface Expression of Bacterial Esterase A by Saccharomyces cerevisiae and Its Enhancement by Constitutive Activation of the Cellular Unfolded Protein Response

Yeast cell surface display is a powerful tool for expression and immobilization of biocatalytically active proteins on a unicellular eukaryote. Here bacterial carboxylesterase EstA from Burkholderia gladioli was covalently anchored into the cell wall of Saccharomyces cerevisiae by in-frame fusion to the endogenous yeast proteins Kre1p, Cwp2p, and Flo1p. When p-nitrophenyl acetate was used as a substrate, the esterase specific activities of yeast expressing the protein fusions were 103 mU mg⁻¹ protein for Kre1/EstA/Cwp2p and 72 mU mg⁻¹ protein for Kre1/EstA/Flo1p. In vivo cell wall targeting was confirmed by esterase solubilization after laminarinase treatment and immunofluorescence microscopy. EstA expression resulted in cell wall-associated esterase activities of 2.72 U mg⁻¹ protein for Kre1/EstA/Cwp2p and 1.27 U mg⁻¹ protein for Kre1/EstA/Flo1p. Furthermore, esterase display on the yeast cell surface enabled the cells to effectively grow on the esterase-dependent carbon source glycerol triacetate (Triacetin). In the case of Kre1/EstA/Flo1p, in vivo maturation within the yeast secretory pathway and final incorporation into the wall were further enhanced when there was constitutive activation of the unfolded protein response pathway. Our results demonstrate that esterase cell surface display in yeast, which, as shown here, is remarkably more effective than EstA surface display in Escherichia coli, can be further optimized by activating the protein folding machinery in the eukaryotic secretion pathway.     

解脂耶氏酵母脂肪酶Lip2的表面展示及其酶学性质

表面展示酶作为全细胞催化剂具备诸如能提高酶的稳定性、省去纯化过程、节约成本等优点。脂肪酶是应用最为广泛的工业酶之一。本研究利用酿酒酵母细胞壁蛋白Cwp2作为锚定蛋白,将解脂耶氏酵母脂肪酶Lip2展示在酿酒酵母细胞表面,以制备脂肪酶全细胞催化剂。Lip2被融合到Cwp2的N端,Cwp2通过其C端的GPI锚定信号共价结合到细胞壁上。表面展示的Lip2可以水解三丁酸甘油酯及对硝基苯酚辛酸酯(pNPC),其pNPC水解酶活达到4.6U/g干细胞。作为全细胞催化剂,表面展示的Lip2具备良好的催化特征,其最适温度为40°C,最适pH为8.0,同时还具备良好的有机溶剂稳定性。     

Comparison of cell wall proteins of Saccharomyces cerevisiae as anchors for cell surface expression of heterologous proteins.

The carboxyl-terminal regions of five cell wall proteins (Cwp1p, Cwp2p, Ag alpha 1p, Tip1p, and Flo1p) and three potential cell wall proteins (Sed1p, YCR89w, and Tir1p) all proved capable of immobilizing alpha-galactosidase in the cell wall of Saccharomyces cerevisiae. The fraction of the total amount of fusion protein that was localized to the cell wall varied depending on the anchor domain used. The highest proportion of cell wall incorporation was achieved with Cwp2p, Ag alpha 1p, or Sed1p as an anchor. Although 80% of these fusion proteins were incorporated in the cell wall, the total production of alpha-galactosidase-Ag alpha 1p was sixfold lower than that of alpha-galactosidase-Cwp2p and eightfold lower than that of alpha-galactosidase-Sed1p. Differences in mRNA levels were not responsible for this discrepancy, nor was an intracellular accumulation of alpha-galactosidase-Ag alpha 1p detectable. A lower translation efficiency of the alpha-galactosidase-AG alpha 1 fusion construct is most likely to be responsible for the low level of protein production. alpha-Galactosidase immobilized by the carboxyl-terminal 67 amino acids of Cwp2p was most effective in the hydrolysis of the high-molecular-weight substrate guar gum from Cyamopsis tetragonoloba. This indicates that the use of a large anchoring domain does not necessarily result in a better exposure of the immobilized enzyme to the exterior of the yeast cell.     

Long anchor using Flo1 protein enhances reactivity of cell surface-displayed glucoamylase to polymer substrates

We investigated the influence of anchor length on the reactivity to polymer substrate of enzyme displayed on yeast cell surfaces. Using various lengths [42, 102, 146, 318, 428, and 1,326 amino acids (aa)] of the C-terminal region of the Saccharomyces cerevisiae Flo1 protein (Flo1p), which plays a major role in yeast flocculation, six display systems with various anchor lengths were constructed. In these systems, the target protein was displayed on the yeast cell surface under the control of the 5'-upstream region of the isocitrate lyase gene of Candida tropicalis ( UPR-ICL). Cell-surface display of Rhizopus oryzae glucoamylase by these systems was induced and confirmed in all systems by immunofluorescence microscopy and immunoblotting. Flow-cytometer measurement of the fluorescence intensity of immunofluorescence-labeled yeast cells displaying glucoamylase indicated that glucoamylase displayed with longer anchors, especially those of 428 and 1,326 aa in length, had higher reactivity to antibodies. The reactivity of starch to displayed glucoamylase, which was evaluated by plate assay, increased with anchor length, as did the cell growth-rate in starch-containing medium. These results indicate that cell-surface display systems using 428- and 1,326-aa length anchors of Flo1p are effective for the display of enzymes on the outer surface of yeast cells.     

Characterization of the yeast (1-->6)-beta-glucan biosynthetic components, Kre6p and Skn1p, and genetic interactions between the PKC1 pathway and extracellular matrix assembly

A characterization of the S. cerevisiae KRE6 and SKN1 gene products extends previous genetic studies on their role in (1-->6)-beta-glucan biosynthesis (Roemer, T., and H. Bussey. 1991. Yeast beta-glucan synthesis: KRE6 encodes a predicted type II membrane protein required for glucan synthesis in vivo and for glucan synthase activity in vitro. Proc. Natl. Acad. Sci. USA. 88:11295-11299; Roemer, T., S. Delaney, and H. Bussey. 1993. SKN1 and KRE6 define a pair of functional homologs encoding putative membrane proteins involved in beta-glucan synthesis. Mol. Cell. Biol. 13:4039-4048). KRE6 and SKN1 are predicted to encode homologous proteins that participate in assembly of the cell wall polymer (1-->6)-beta-glucan. KRE6 and SKN1 encode phosphorylated integral-membrane glycoproteins, with Kre6p likely localized within a Golgi subcompartment. Deletion of both these genes is shown to result in a dramatic disorganization of cell wall ultrastructure. Consistent with their direct role in the assembly of this polymer, both Kre6p and Skn1p possess COOH-terminal domains with significant sequence similarity to two recently identified glucan-binding proteins. Deletion of the yeast protein kinase C homolog, PKC1, leads to a lysis defect (Levin, D. E., and E. Bartlett-Heubusch. 1992. Mutants in the S. cerevisiae PKC1 gene display a cell cycle-specific osmotic stability defect. J. Cell Biol. 116:1221-1229). Kre6p when even mildly overproduced, can suppress this pkc1 lysis defect. When mutated, several KRE pathway genes and members of the PKC1-mediated MAP kinase pathway have synthetic lethal interactions as double mutants. These suppression and synthetic lethal interactions, as well as reduced beta- glucan and mannan levels in the pkc1 null wall, support a role for the PKC1 pathway functioning in cell wall assembly. PKC1 potentially participates in cell wall assembly by regulating the synthesis of cell wall components, including (1-->6)-beta-glucan.     

Specific Cell Wall Proteins Confer Resistance to Nisin upon Yeast Cells

The cell wall of a yeast cell forms a barrier for various proteinaceous and nonproteinaceous molecules. Nisin, a small polypeptide and a well-known preservative active against gram-positive bacteria, was tested with wild-type Saccharomyces cerevisiae. This peptide had no effect on intact cells. However, removal of the cell wall facilitated access of nisin to the membrane and led to cell rupture. The roles of individual components of the cell wall in protection against nisin were studied by using synchronized cultures. Variation in nisin sensitivity was observed during the cell cycle. In the S phase, which is the phase in the cell cycle in which the permeability of the yeast wall to fluorescein isothiocyanate dextrans is highest, the cells were most sensitive to nisin. In contrast, the cells were most resistant to nisin after a peak in expression of the mRNA of cell wall protein 2 (Cwp2p), which coincided with the G2 phase of the cell cycle. A mutant lacking Cwp2p has been shown to be more sensitive to cell wall-interfering compounds and Zymolyase (J. M. Van der Vaart, L. H. Caro, J. W. Chapman, F. M. Klis, and C. T. Verrips, J. Bacteriol. 177:3104–3110, 1995). Here we show that of the single cell wall protein knockouts, a Cwp2p-deficient mutant is most sensitive to nisin. A mutant with a double knockout of Cwp1p and Cwp2p is hypersensitive to the peptide. Finally, in yeast mutants with impaired cell wall structure, expression of both CWP1 and CWP2 was modified. We concluded that Cwp2p plays a prominent role in protection of cells against antimicrobial peptides, such as nisin, and that Cwp1p and Cwp2p play a key role in the formation of a normal cell wall.     

Mass spectrometric quantitation of covalently bound cell wall proteins in Saccharomyces cerevisiae

The cell wall of yeast consists of an internal skeletal layer and an external layer of glycoproteins covalently linked to the stress-bearing polysaccharides. The cell wall protein (CWP) population consists of over 20 different proteins, and may vary in composition. We present two complementary methods for quantifying CWPs, based on isobaric tagging and tandem MS: (1) absolute quantitation of individual CWPs, allowing estimation of surface densities; and (2) relative quantitation of CWPs, allowing monitoring of the dynamics of the CWP population. For absolute quantitation, we selected a representative group of five proteins (Cwp1p, Crh1p, Scw4p, Gas1p, and Ecm33p), which had 67 x 10(3), 44 x 10(3), 38 x 10(3), 11 x 10(3) and 6.5 x 10(3) of wall-bound copies per cell, respectively. As Cwp1p is predominantly incorporated in the birth scar, this corresponds to a protein density of c. 22 x 10(3) copies microm(-2). For relative quantitation, we compared wild-type cells to gas1Delta cells, in which the cell wall integrity pathway is constitutively activated. The levels of Crh1p, Crh2p, Ecm33p, Gas5p, Pst1p and Pir3p increased about three- to fivefold, whereas the level of Scw4p was significantly decreased. We propose that our methods are widely applicable to other fungi.     

Heterologous expression of a Clostridium minicellulosome in Saccharomyces cerevisiae

The yeast Saccharomyces cerevisiae was genetically modified to assemble a minicellulosome on its cell surface by heterologous expression of a chimeric scaffoldin protein from Clostridium cellulolyticum under the regulation of the phosphoglycerate kinase 1 ( PGK1 ) promoter and terminator regulatory elements, together with the β-xylanase 2 secretion signal of Trichoderma reesei and cell wall protein 2 (Cwp2) of S. cerevisiae . Fluorescent microscopy and Far Western blot analysis confirmed that the Scaf3p is targeted to the yeast cell surface and that the Clostridium thermocellum cohesin domain is functional in yeast. Similarly, functionality of the C. thermocellum dockerin domain in yeast is shown by binding to the Scaf3 protein in Far Western blot analysis. Phenotypic evidence for cohesin–dockerin interaction was also established with the detection of a twofold increase in tethered endoglucanase enzyme activity in S. cerevisiae cells expressing the Scaf3 protein compared with the parent strain. This study highlights the feasibility to future design of enhanced cellulolytic strains of S. cerevisiae through emulation of the cellulosome concept. Potentially, Scaf3p-armed yeast could also be developed into an alternative cell surface display strategy with various tailor-made applications.     

Construction of yeast strains with high cell surface lipase activity by using novel display systems based on the Flo1p flocculation functional domain

We constructed a novel cell-surface display system, using as a new type of cell-wall anchor 3,297 or 4,341 bp of the 3' region of the FLO1 gene (FS or FL gene, respectively), which encodes the flocculation functional domain of Flo1p. In this system, the N terminus of the target protein was fused to the FS or FL protein and the fusion proteins were expressed under the control of the inducible promoter UPR-ICL (5' upstream region of the isocitrate lyase of Candida tropicalis). Using this new system, recombinant lipase with a pro sequence from Rhizopus oryzae (rProROL), which has its active site near the C terminus, was displayed on the cell surface. Cell-surface display of the FSProROL and FLProROL fusion proteins was confirmed by immunofluorescence microscopy and immunoblotting. Lipase activity reached 145 IU/liter (61.3 IU/g [dry cell weight]) on the surface of the yeast cells, which successfully catalyzed the methanolysis reaction. Using these whole-cell biocatalysts, methylesters synthesized from triglyceride and methanol reached 78.3% after 72 h of reaction. To our knowledge, this is the first example of cell-surface display of lipase with high activity. Interestingly, the yeast cells displaying the FLProROL protein showed strong flocculation, even though the glycosylphosphatidylinositol anchor attachment signal and cell-membrane-anchoring region of Flo1p had been deleted from this gene. The cell-surface display system based on FL thus endows the yeast strain with both novel enzyme display and strong flocculation ability.     

Molecular breeding of yeast with higher metal-adsorption capacity by expression of histidine-repeat insertion in the protein anchored to the cell wall

A fusion protein of hexa-histidine repeat (His) and glycosylphosphatidylinositol (GPI)-anchor region of Saccharomyces cerevisiae Cwp1 with Aspergillus oryzae Taka-amylase A (TAA) was expressed on the yeast cell surface. The expressed fusion protein (TAA-His-Cwp1) was localized on the cell wall and demonstrated amylolytic activity. In comparison with the TAA-Cwp1 expressing strain, these cells exhibited 1.6- to 2.8-fold higher adsorbing capacity for Cu(2+), Ni(2+), and Zn(2+).     

Displaying Lipase B from Candida antarctica in Pichia pastoris Using the Yeast Surface Display Approach: Prospection of a New Anchor and Characterization of the Whole Cell Biocatalyst

Yeast Surface Display (YSD) is a strategy to anchor proteins on the yeast cell wall which has been employed to increase enzyme stability thus decreasing production costs. Lipase B from Candida antarctica (LipB) is one of the most studied enzymes in the context of industrial biotechnology. This study aimed to assess the biochemical features of this important biocatalyst when immobilized on the cell surface of the methylotrophic yeast Pichia pastoris using the YSD approach. For that purpose, two anchors were tested. The first (Flo9) was identified after a prospection of the P. pastoris genome being related to the family of flocculins similar to Flo1 but significantly smaller. The second is the Protein with Internal Repeats (Pir1) from P. pastoris. An immunolocalization assay showed that both anchor proteins were able to display the reporter protein EGFP in the yeast outer cell wall. LipB was expressed in P. pastoris fused either to Flo9 (FLOLIPB) or Pir1 (PIRLIPB). Both constructions showed hydrolytic activity towards tributyrin (>100 U/mg_dcw and >80 U/mg_dcw, respectively), optimal hydrolytic activity around 45°C and pH 7.0, higher thermostability at 45°C and stability in organic solvents when compared to a free lipase.     

Construction of Yeast Strains with High Cell Surface Lipase Activity by Using Novel Display Systems Based on the Flo1p Flocculation Functional Domain

We constructed a novel cell-surface display system, using as a new type of cell-wall anchor 3,297 or 4,341 bp of the 3′ region of the FLO1 gene (FS or FL gene, respectively), which encodes the flocculation functional domain of Flo1p. In this system, the N terminus of the target protein was fused to the FS or FL protein and the fusion proteins were expressed under the control of the inducible promoter UPR-ICL (5′ upstream region of the isocitrate lyase of Candida tropicalis). Using this new system, recombinant lipase with a pro sequence from Rhizopus oryzae (rProROL), which has its active site near the C terminus, was displayed on the cell surface. Cell-surface display of the FSProROL and FLProROL fusion proteins was confirmed by immunofluorescence microscopy and immunoblotting. Lipase activity reached 145 IU/liter (61.3 IU/g [dry cell weight]) on the surface of the yeast cells, which successfully catalyzed the methanolysis reaction. Using these whole-cell biocatalysts, methylesters synthesized from triglyceride and methanol reached 78.3% after 72 h of reaction. To our knowledge, this is the first example of cell-surface display of lipase with high activity. Interestingly, the yeast cells displaying the FLProROL protein showed strong flocculation, even though the glycosylphosphatidylinositol anchor attachment signal and cell-membrane-anchoring region of Flo1p had been deleted from this gene. The cell-surface display system based on FL thus endows the yeast strain with both novel enzyme display and strong flocculation ability.     

高效絮凝素毕赤酵母表面展示系统的构建

为了获得高效的脂肪酶毕赤酵母表面展示系统,利用来自酿酒酵母絮凝素蛋白Flo1的N端874个氨基酸残基(FS)和C端的1101个氨基酸残基(FL)作为锚定蛋白分别构建了2套载体系统.带有前肽的米黑根毛霉脂肪酶(ProRML)克隆到构建的2套展示载体中,使米黑根毛霉脂肪酶(RML)分别以N端锚定或C端锚定的方式实现在毕赤酵母细胞表面的展示.利用RMLC端的Flag标签,通过流式细胞术和激光扫描共聚焦显微镜检测2套系统中RML在酵母表面的展示情况.研究发现,N端锚定于酵母表面的展示酶FSR以pNPC为底物时,水解活力达到了105.3U/g,大约为C端锚定的展示酶FLR活力的2倍.同时FSR比FLR具有更宽的温度、pH作用范围和更好的热稳定性.与游离酶和固定化酶相比,展示酶FSR也表现出更为优良的热稳定性.结果提示,基于Flo1N端锚定的展示系统更适合展示活性中心近C端的脂肪酶,推动了展示酶的进一步研究和开发.     

Use of Pseudomonas putida EstA as an anchoring motif for display of a periplasmic enzyme on the surface of Escherichia coli

The functional expression of proteins on the surface of bacteria has proven important for numerous biotechnological applications. In this report, we investigated the N-terminal fusion display of the periplasmic enzyme beta-lactamase (Bla) on the surface of Escherichia coli by using the translocator domain of the Pseudomonas putida outer membrane esterase (EstA), which is a member of the lipolytic autotransporter enzymes. To find out the transport function of a C-terminal domain of EstA, we generated a set of Bla-EstA fusion proteins containing N-terminally truncated derivatives of the EstA C-terminal domain. The surface exposure of the Bla moiety was verified by whole-cell immunoblots, protease accessibility, and fluorescence-activated cell sorting. The investigation of growth kinetics and host cell viability showed that the presence of the EstA translocator domain in the outer membrane neither inhibits cell growth nor affects cell viability. Furthermore, the surface-exposed Bla moiety was shown to be enzymatically active. These results demonstrate for the first time that the translocator domain of a lipolytic autotransporter enzyme is an effective anchoring motif for the functional display of heterologous passenger protein on the surface of E. coli. This investigation also provides a possible topological model of the EstA translocator domain, which might serve as a basis for the construction of fusion proteins containing heterologous passenger domains.     

Novel strategy for anchorage position control of GPI-attached proteins in the yeast cell wall using different GPI-anchoring domains

The yeast cell surface provides space to display functional proteins. Heterologous proteins can be covalently anchored to the yeast cell wall by fusing them with the anchoring domain of glycosylphosphatidylinositol (GPI)-anchored cell wall proteins (GPI-CWPs). In the yeast cell-surface display system, the anchorage position of the target protein in the cell wall is an important factor that maximizes the capabilities of engineered yeast cells because the yeast cell wall consists of a 100- to 200-nm-thick microfibrillar array of glucan chains. However, knowledge is limited regarding the anchorage position of GPI-attached proteins in the yeast cell wall. Here, we report a comparative study on the effect of GPI-anchoring domain–heterologous protein fusions on yeast cell wall localization. GPI-anchoring domains derived from well-characterized GPI-CWPs, namely Sed1p and Sag1p, were used for the cell-surface display of heterologous proteins in the yeast Saccharomyces cerevisiae. Immunoelectron-microscopic analysis of enhanced green fluorescent protein (eGFP)-displaying cells revealed that the anchorage position of the GPI-attached protein in the cell wall could be controlled by changing the fused anchoring domain. eGFP fused with the Sed1-anchoring domain predominantly localized to the external surface of the cell wall, whereas the anchorage position of eGFP fused with the Sag1-anchoring domain was mainly inside the cell wall. We also demonstrate the application of the anchorage position control technique to improve the cellulolytic ability of cellulase-displaying yeast. The ethanol titer during the simultaneous saccharification and fermentation of hydrothermally-processed rice straw was improved by 30% after repositioning the exo- and endo-cellulases using Sed1- and Sag1-anchor domains. This novel anchorage position control strategy will enable the efficient utilization of the cell wall space in various fields of yeast cell-surface display technology.     

Action of multiple endoplasmic reticulum chaperon-like proteins is required for proper folding and polarized localization of Kre6 protein essential in yeast cell wall β-1,6-glucan synthesis

Saccharomyces cerevisiae Kre6 is a type II membrane protein essential for cell wall β-1,6-glucan synthesis. Recently we reported that the majority of Kre6 is in the endoplasmic reticulum (ER), but a significant portion of Kre6 is found in the plasma membrane of buds, and this polarized appearance of Kre6 is required for β-1,6-glucan synthesis. An essential membrane protein, Keg1, and ER chaperon Rot1 bind to Kre6. In this study we found that in mutant keg1-1 cells, accumulation of Kre6 at the buds is diminished, binding of Kre6 to Keg1 is decreased, and Kre6 becomes susceptible to ER-associated degradation (ERAD), which suggests Keg1 participates in folding and transport of Kre6. All mutants of the calnexin cycle member homologues (cwh41, rot2, kre5, and cne1) showed defects in β-1,6-glucan synthesis, although the calnexin chaperon system is considered not functional in yeast. We found synthetic defects between them and keg1-1, and Cne1 co-immunoprecipitated with Keg1 and Kre6. A stronger binding of Cne1 to Kre6 was detected when two glucosidases (Cwh41 and Rot2) that remove glucose on N-glycan were functional. Skn1, a Kre6 homologue, was not detected by immunofluorescence in the wild type yeast, but in kre6Δ cells it became detectable and behaved like Kre6. In conclusion, the action of multiple ER chaperon-like proteins is required for proper folding and localization of Kre6 and probably Skn1 to function in β-1,6-glucan synthesis.