Expression of a human alpha-globin/fibronectin gene hybrid generates two mRNAs by alternative splicing.

We have isolated genomic clones for human fibronectin (FN), by screening a human gene library with previously isolated FN cDNA clones. We have recently reported two different FN mRNAs, one of them containing an additional 270 nucleotide insert coding for a structural domain ED. Restriction mapping and DNA sequencing of the genomic clones show that the ED type III unit corresponds to exactly one exon in the gene, whilst the two flanking type III units are split in two exons at variable positions. When an alpha-globin/FN gene hybrid construct, containing the ED exon, flanking introns and neighbouring FN exons, is transfected into HeLa cells, two hybrid mRNAs differing by the ED exon are synthesized. These experiments confirmed that the two FN mRNAs observed in vivo arise from the same gene by alternative splicing.     

Genetic analysis of the cell binding domain region of the chicken fibronectin gene

We have determined the nucleotide sequence of the cell binding domain region of the chicken fibronectin gene and analyzed it evolutionaly. We present here the complete nucleotide sequence of 4.3 kb HindIII/EcoRI segment from the clone lambda FC23 of the chicken fibronectin gene. There were five exons in this segment. When we lined up the amino acid of exons 28, 29 and 31, three alignments, known as the Type III repeat, appeared. Tetrapeptide, -RGDS-, called the cell binding domain, existed in the second repeat, coding exon 30. It was presumed that the Type III repeats were composed of two exons in the chicken gene, the same as in the rat and humans. We found repeatedly appearing amino-acid sequences such as -TIT- (three arrays in these Type III repeats) but also found one of the amino acids substituted in the tripeptide in these Type III repeats (seven arrays). We analyzed these repeats from the point of view of evolution. We used three of the nucleotide sequences (12-18 bp) coding such -TIT- repeats as a unit length for comparing the various homologies after dividing the coding region into 56 segments. The mutual homology of the divided segments to each one of three showed 53% on average. On the other hand, the mutual nucleotide homology of the Type III repeat was 44%. This suggested that the Type III repeat may have been developed by frequent duplication of small gene units.     

Intron/exon structure of the chicken pyruvate kinase gene

The chicken pyruvate kinase gene is interrupted by at least ten introns, including nine introns within the coding region. We compare the structure of this gene with the three-dimensional protein structure of the homologous cat muscle enzyme. The introns are not randomly placed--they divide the coding sequence into fairly uniformly sized pieces encoding discrete elements of secondary structure. The introns tend to fall at interruptions between stretches of alpha-helix or beta-sheet residues, and each of the six exons that contribute to the barrel-shaped central domain include one or two repeats of a simple unit, an alpha-helix plus a beta strand. This structure suggests that introns were not inserted into a previously uninterrupted coding sequence, but instead are products of the evolution of the first pyruvate kinase gene. We have found some sequence homology between a segment of pyruvate kinase and the structurally homologous mononucleotide binding fold of alcohol dehydrogenase. The superposition of these two regions aligns an intron from the maize alcohol dehydrogenase gene four nucleotides from an intron in the chicken pyruvate kinase gene.     

Conserved exon-intron organization in two different caerulein precursor genes of Xenopus laevis. Additional detection of an exon potentially coding for a new peptide

From a genomic library of Xenopus laevis, two genes coding for different preprocaeruleins have been isolated and sequenced. These correspond to the type I and type III precursors analyzed previously at the cDNA level [Richter, K., Egger, R. and Kreil, G. (1986) J. Biol. Chem. 261, 3676-3680]. The type III gene comprises eight exons; the type I apparently contains eight exons as well, of which six have been sequenced. The genetic information for the dekapeptide caerulein is present on small exons of 45 base pairs. The two genes are highly homologous in their 5'-flanking region, the exon/intron boundaries, and long stretches of intron sequences. A possible scheme for the evolution of this small family of genes through exon and gene duplications is presented. In the type I gene, in place of one of the caerulein exons, a potential exon with conserved splice sites was discovered. If expressed in some frog cells, this exon would code for a new peptide 60% homologous to caerulein.     

Exon structure of a mannose-binding protein gene reflects its evolutionary relationship to the asialoglycoprotein receptor and nonfibrillar collagens

Cloned cDNAs encoding mannose-binding proteins isolated from rat liver have been used to isolate one of the genes encoding this group of proteins. This gene, which encodes the minor form of binding protein (designated MBP-A), has been characterized by sequence analysis. The protein-coding portion of the mRNA for the MBP-A is encoded by four exons separated by three introns. The NH2-terminal, collagen-like portion of the protein is encoded by the first two exons. These exons resemble the exons found in the genes for nonfibrillar collagens in that the intron which divides them is inserted between the first two bases of a glycine codon and the exons do not have the 54- or 108-base pair lengths characteristic of fibrillar collagen genes. The carbohydrate-binding portion of MBP-A is encoded by the remaining two exons. This portion of the protein is homologous to the carbohydrate-recognition domain of the hepatic asialoglycoprotein receptor, which is encoded by four exons. It appears that the three COOH-terminal exons of the asialoglycoprotein receptor gene have been fused into a single exon in the MBP-A gene. The organization of the MBP-A gene is very similar to the arrangement of the gene encoding the highly homologous pulmonary surfactant apoprotein, although one of the intron positions is shifted by a single amino acid. The 3' end of a mannose-binding protein pseudogene has also been characterized.     

Structure of the human hemopexin gene and evidence for intron-mediated evolution

Summary The human hemopexin gene was isolated and its structure determined. The gene spans approximately 12 kb and is interrupted by nine introns. When the intron/exon pattern was examined with respect to the polypeptide segments they encode, a direct correspondence between exons and the 10 repeating units in the protein was observed. The introns are not randomly placed; they fall in the middle of the region of amino acid sequence homology in strikingly similar locations in 6 of the 10 units and in a symmetrical position in the two halves of the coding sequence. These features strongly support the hypothesis that the gene evolved through intron-mediated duplications of a primordial sequence to a five-exon cluster. A more recent gene duplication led to the present-day gene organization.     

Structure of a gene for rat calmodulin

The structural organization of the entire rat calmodulin gene was determined by cloning and sequencing overlapping genomic and cDNA clones from rat genomic and brain cDNA libraries. The intron/exon organization was determined by direct comparison of these sequences. Rat calmodulin gene is 9000 bases long and consisted of six exons interrupted by introns of variable sizes. The first intron separates the initiation codon (ATG) from the coding region of the protein. Three out of four intron/exon junctions in the coding region reside in the middle of calcium binding subdomains and do not correlate with the quarterly divided intramolecular homology of the protein. Their positions exactly coincide with those of the corrected version of chicken calmodulin gene. The rat calmodulin gene harbors a stretch of sequences homologous to a rat middle repetitive "identifier sequence" in the middle of the third intron. Analysis of the immediate 5' upstream region detected a TATA box (TATATATAT) and three C-G boxes (CCGCCC) but not a CAT box (CCAAT). A conserved sequence (GCGCCGCGYCYYGGGGGC) was found at -125 for rat and at -204 for chicken calmodulin genes.     

Nucleotide sequence of the gene for the b subunit of human factor XIII

Factor XIII (Mr 320,000) is a blood coagulation factor that stabilizes and strengthens the fibrin clot. It circulates in blood as a tetramer composed of two a subunits (Mr 75,000 each) and two b subunits (Mr 80,000 each). The b subunit consists of 641 amino acids and includes 10 tandem repeats of 60 amino acids known as GP-I structures, short consensus repeats (SCR), or sushi domains. In the present study, the human gene for the b subunit has been isolated from three different genomic libraries prepared in lambda phage. Fifteen independent phage with inserts coding for the entire gene were isolated and characterized by restriction mapping, Southern blotting, and DNA sequencing. The gene was found to be 28 kilobases in length and consisted of 12 exons (I-XII) separated by 11 intervening sequences. The leader sequence was encoded by exon I, while the carbonyl-terminal region of the protein was encoded by exon XII. Exons II-XI each coded for a single sushi domain, suggesting that the gene evolved through exon shuffling and duplication. The 12 exons in the gene ranged in size from 64 to 222 base pairs, while the introns ranged in size from 87 to 9970 nucleotides and made up 92% of the gene. The introns contained four Alu repetitive sequences, one each in introns A, E, I, and J. A fifth Alu repeat was present in the flanking 3' end of the gene. Two partial KpnI repeats were also found in the introns, including one in intron I and one in intron J. The KpnI repeat in intron J was 89% homologous to a sequence of approximately 2200 nucleotides flanking the gene coding for human beta globin and approximately 3800 nucleotides from the L1 insertion present in the gene for human factor VIII. Intron H also contained an "O" family repeat, while two potential regions for Z-DNA were identified within introns G and J. One nucleotide change was found in the coding region of the gene when its sequence was compared to that of the cDNA. This difference, however, did not result in a change in the amino acid sequence of the protein.     

Duplication of seven exons in LDL receptor gene caused by Alu-Alu recombination in a subject with familial hypercholesterolemia

A defective LDL receptor gene in a child with familial hypercholesterolemia produces a receptor precursor that is 50,000 daltons larger than normal (apparent Mr 170,000 vs. 120,000). The elongated protein resulted from a 14 kilobase duplication that encompasses exons 2 through 8. The duplication arose from an unequal crossing-over between homologous repetitive elements (Alu sequences) in intron 1 and intron 8. The mutant receptor has 18 contiguous cysteine-rich repeat sequences instead of the normal nine. Seven of these duplicated repeats are derived from the ligand-binding domain, and two repeats are part of the epidermal growth factor precursor homology region. The elongated receptor undergoes normal carbohydrate processing, its apparent molecular weight increases to 210,000, and the receptor reaches the cell surface where it binds reduced amounts of LDL but undergoes efficient internalization and recycling. The current findings support an evolutionary model in which homologous recombination between repetitive elements in introns leads to exon duplication during evolution of proteins.     

Organization of the gene encoding the human macrophage mannose receptor (MRC1).

The gene for the human macrophage mannose receptor (MRC1) has been characterized by isolation of clones covering the entire coding region. Sequence analysis reveals that the gene is divided into 30 exons. The first three exons encode the signal sequence, the NH2-terminal cysteine-rich domain, and the fibronectin type II repeat, while the final exon encodes the transmembrane anchor and the cytoplasmic tail. The intervening 26 exons encode the eight carbohydrate-recognition domains and intervening spacer elements. However, no simple correlation between intron boundaries and functional carbohydrate-recognition domains is apparent. The pattern of intron positions as well as comparison of the sequences of the carbohydrate-recognition domains suggests that the duplication of these domains was an evolutionarily ancient event.     

Sequence of the gene for the constant region of the mu chain of Balb/c mouse immunoglobulin

We present the complete sequence of Cμ immunoglobulin constant region gene of mouse with 5′ flanking and 3′ untranslated regions. The gene consists of four exons coding for protein domains which are separated by three introns. Intensive study of the homology relationship of DNA sequences within the Cμ gene and Cγ2b gene leads us to believe that the shifting of existing splice sites along with creation of new ones plays a significant role in evolution, driving the reversible reaction exon ? intron.     

Identical G+1 to A mutations in three different introns of the type III procollagen gene (COL3A1) produce different patterns of RNA splicing in three variants of Ehlers-Danlos syndrome. IV. An explanation for exon skipping some mutations and not others

Identical G+1 mutations in three different introns of the gene for type III procollagen (COL3A1) that cause aberrant splicing of RNA were found in three probands with life-threatening variants of Ehlers-Danlos syndrome. Because the three mutations were in a gene with multiple and homologous exons, they provided an interesting test for factors that influence aberrant splicing. The G+1 to A mutation in intron 16 caused extensive exon skipping, the G+1 to A mutation in intron 20 caused both use of a cryptic splice site and retention of all the intron sequences, and the G+1 to A mutation in intron 42 caused efficient use of a single cryptic splice site. The different patterns of RNA splicing were not explained by evaluation of potential cryptic splice sites in the introns by either their homology with 5'-splice sites from other genes or by their delta G(0)37 values for binding to U1 RNA. Instead, the results suggested that the patterns of aberrant RNA splicing were primarily determined by the relative rates at which adjacent introns were normally spliced.     

Complete sequence of a bovine type I cytokeratin gene: conserved and variable intron positions in genes of polypeptides of the same cytokeratin subfamily

The complete sequence of a bovine gene encoding an epidermal cytokeratin of mol. wt. 54 500 (No VIb) of the acidic (type I) subfamily is presented, including an extended 5' upstream region. The gene (4377 bp, seven introns) which codes for a representative of the glycine-rich subtype of cytokeratins of this subfamily, is compared with genes coding for: another subtype of type I cytokeratin; a basic (type II) cytokeratin gene; and vimentin, a representative of another intermediate filament (IF) protein class. The positions of the five introns located within the highly homologous alpha-helix-rich rod domain are identical or equivalent, i.e., within the same triplet, in the two cytokeratin I genes. Four of these intron positions are also identical with intron sites in the vimentin gene, and three of these intron positions are identical or similar in the type I and type II cytokeratin subfamilies. On the other hand, the gene organization of both type I cytokeratins differs from that of the type II cytokeratin in the rod region in five intron positions and in the introns located in the carboxy-terminal tail region, with the exception of one position at the rod-tail junction. Remarkably, the two type I cytokeratins also differ from each other in the positions of two introns located at and in the region coding for the hypervariable, carboxy-terminal portion. The introns and the 5' upstream regions of the cytokeratin VIb gene do not display notable sequence homologies with the other IF protein genes, but sequences identical with--or very similar to--certain viral and immunoglobulin enhancers have been identified.(ABSTRACT TRUNCATED AT 250 WORDS)     

Characterization of bovine keratin genes: similarities of exon patterns in genes coding for different keratins.

Four different genomic clones which contain the genes coding for epidermal keratins Ia (mol. wt. approximately 68 000), Ib (68 000), III (60 000) and VIb (54 500) have been selected using cDNA probes and identified by hybrid-selection translation. The genes vary considerably in length, primarily due to differences in intron sizes: keratin Ia, 9.3 kb (approximately 2.55 kb total exons); keratin Ib, 6.0 kb (2.25 kb exons); keratin III, 6.0 kb (2.2 kb exons); keratin VIb, 4.4 kb (1.85 kb exons). The genes for all three representatives of the basic (type II) cytokeratin subfamily, i.e., keratins Ia, Ib and III, contain eight introns of variable sizes (0.1-1.8 kb) and their exon patterns are very similar. The gene coding for keratin VIb, a representative of the acidic (type I) subfamily, contains seven introns, and the size pattern of its five innermost exons closely resembles that of the genes of the type II keratins. Most of the introns are located in regions coding for the alpha-helical cores of these proteins. Mapping of the intron positions by the S1 nuclease technique and sequencing of some exon-intron boundaries has revealed that some of the introns of all four keratin genes have similar positions to each other and to those of the hamster vimentin gene.(ABSTRACT TRUNCATED AT 250 WORDS)