Scanning force microscopy of DNA translocation by the Type III restriction enzyme EcoP15I

Type III restriction enzymes are multifunctional heterooligomeric enzymes that cleave DNA at a fixed position downstream of a non-symmetric recognition site. For effective DNA cleavage these restriction enzymes need the presence of two unmethylated, inversely oriented recognition sites in the DNA molecule. DNA cleavage was proposed to result from ATP-dependent DNA translocation, which is expected to induce DNA loop formation, and collision of two enzyme-DNA complexes. We used scanning force microscopy to visualise the protein interaction with linear DNA molecules containing two EcoP15I recognition sites in inverse orientation. In the presence of the cofactors ATP and Mg(2+), EcoP15I molecules were shown to bind specifically to the recognition sites and to form DNA loop structures. One of the origins of the protein-clipped DNA loops was shown to be located at an EcoP15I recognition site, the other origin had an unspecific position in between the two EcoP15I recognition sites. The data demonstrate for the first time DNA translocation by the Type III restriction enzyme EcoP15I using scanning force microscopy. Moreover, our study revealed differences in the DNA-translocation processes mediated by Type I and Type III restriction enzymes.     

Type III restriction endonucleases translocate DNA in a reaction driven by recognition site-specific ATP hydrolysis.

Type III restriction/modification systems recognize short non-palindromic sequences, only one strand of which can be methylated. Replication of type III-modified DNA produces completely unmethylated recognition sites which, according to classical mechanisms of restriction, should be signals for restriction. We have shown previously that suicidal restriction by the type III enzyme EcoP15I is prevented if all the unmodified sites are in the same orientation: restriction by EcoP15I requires a pair of unmethylated, inversely oriented recognition sites. We have now addressed the molecular mechanism of site orientation-specific DNA restriction. EcoP15I is demonstrated to possess an intrinsic ATPase activity, the potential driving force of DNA translocation. The ATPase activity is uniquely recognition site-specific, but EcoP15I-modified sites also support the reaction. EcoP15I DNA restriction patterns are shown to be predetermined by the enzyme-to-site ratio, in that site-saturating enzyme levels elicit cleavage exclusively between the closest pair of head-to-head oriented sites. DNA restriction is blocked by Lac repressor bound in the intervening sequence between the two EcoP15I sites. These results rule out DNA looping and strongly suggest that cleavage is triggered by the close proximity of two convergently tracking EcoP15I-DNA complexes.     

DNA cleavage by type III restriction-modification enzyme EcoP15I is independent of spacer distance between two head to head oriented recognition sites

The type III restriction-modification enzyme EcoP15I requires the interaction of two unmethylated, inversely oriented recognition sites 5'-CAGCAG in head to head configuration to allow an efficient DNA cleavage. It has been hypothesized that two convergent DNA-translocating enzyme-substrate complexes interact to form the active cleavage complex and that translocation is driven by ATP hydrolysis. Using a half-automated, fluorescence-based detection method, we investigated how the distance between two inversely oriented recognition sites affects DNA cleavage efficiency. We determined that EcoP15I cleaves DNA efficiently even for two adjacent head to head or tail to tail oriented target sites. Hence, DNA translocation appears not to be required for initiating DNA cleavage in these cases. Furthermore, we report here that EcoP15I is able to cleave single-site substrates. When we analyzed the interaction of EcoP15I with DNA substrates containing adjacent target sites in the presence of non-hydrolyzable ATP analogues, we found that cleavage depended on the hydrolysis of ATP. Moreover, we show that cleavage occurs at only one of the two possible cleavage positions of an interacting pair of target sequences. When EcoP15I bound to a DNA substrate containing one recognition site in the absence of ATP, we observed a 36 nucleotide DNaseI-footprint that is asymmetric on both strands. All of our footprinting experiments showed that the enzyme did not cover the region around the cleavage site. Analyzing a DNA fragment with two head to head oriented recognition sites, EcoP15I protected 27-33 nucleotides around the recognition sequence, including an additional region of 26 bp between both cleavage sites. For all DNA substrates examined, the presence of ATP caused altered footprinting patterns. We assume that the altered patterns are most likely due to a conformational change of the enzyme. Overall, our data further refine the tracking-collision model for type III restriction enzymes.     

Subunit assembly and mode of DNA cleavage of the type III restriction endonucleases EcoP1I and EcoP15I

DNA cleavage by type III restriction endonucleases requires two inversely oriented asymmetric recognition sequences and results from ATP-dependent DNA translocation and collision of two enzyme molecules. Here, we characterized the structure and mode of action of the related EcoP1I and EcoP15I enzymes. Analytical ultracentrifugation and gel quantification revealed a common Res(2)Mod(2) subunit stoichiometry. Single alanine substitutions in the putative nuclease active site of ResP1 and ResP15 abolished DNA but not ATP hydrolysis, whilst a substitution in helicase motif VI abolished both activities. Positively supercoiled DNA substrates containing a pair of inversely oriented recognition sites were cleaved inefficiently, whereas the corresponding relaxed and negatively supercoiled substrates were cleaved efficiently, suggesting that DNA overtwisting impedes the convergence of the translocating enzymes. EcoP1I and EcoP15I could co-operate in DNA cleavage on circular substrate containing several EcoP1I sites inversely oriented to a single EcoP15I site; cleavage occurred predominantly at the EcoP15I site. EcoP15I alone showed nicking activity on these molecules, cutting exclusively the top DNA strand at its recognition site. This activity was dependent on enzyme concentration and local DNA sequence. The EcoP1I nuclease mutant greatly stimulated the EcoP15I nicking activity, while the EcoP1I motif VI mutant did not. Moreover, combining an EcoP15I nuclease mutant with wild-type EcoP1I resulted in cutting the bottom DNA strand at the EcoP15I site. These data suggest that double-strand breaks result from top strand cleavage by a Res subunit proximal to the site of cleavage, whilst bottom strand cleavage is catalysed by a Res subunit supplied in trans by the distal endonuclease in the collision complex.     

DNA communications by Type III restriction endonucleases--confirmation of 1D translocation over 3D looping

DNA cleavage by Type III restriction enzymes is governed strictly by the relative arrangement of recognition sites on a DNA substrate—endonuclease activity is usually only triggered by sequences in head-to-head orientation. Tens to thousands of base pairs can separate these sites. Long distance communication over such distances could occur by either one-dimensional (1D) DNA translocation or 3D DNA looping. To distinguish between these alternatives, we analysed the activity of EcoPI and EcoP15I on DNA catenanes in which the recognition sites were either on the same or separate rings. While substrates with a pair of sites located on the same ring were cleaved efficiently, catenanes with sites on separate rings were not cleaved. These results exclude a simple 3D DNA-looping activity. To characterize the interactions further, EcoPI was incubated with plasmids carrying two recognition sites interspersed with two 21res sites for site-specific recombination by Tn21 resolvase; inhibition of recombination would indicate the formation of stable DNA loops. No inhibition was observed, even under conditions where EcoPI translocation could also occur.     

Type III restriction is alleviated by bacteriophage (RecE) homologous recombination function but enhanced by bacterial (RecBCD) function

Previous works have demonstrated that DNA breaks generated by restriction enzymes stimulate, and are repaired by, homologous recombination with an intact, homologous DNA region through the function of lambdoid bacteriophages lambda and Rac. In the present work, we examined the effect of bacteriophage functions, expressed in bacterial cells, on restriction of an infecting tester phage in a simple plaque formation assay. The efficiency of plaque formation on an Escherichia coli host carrying EcoRI, a type II restriction system, is not increased by the presence of Rac prophage-presumably because, under the single-infection conditions of the plaque assay, a broken phage DNA cannot find a homologue with which to recombine. To our surprise, however, we found that the efficiency of plaque formation in the presence of a type III restriction system, EcoP1 or EcoP15, is increased by the bacteriophage-mediated homologous recombination functions recE and recT of Rac prophage. This type III restriction alleviation does not depend on lar on Rac, unlike type I restriction alleviation. On the other hand, bacterial RecBCD-homologous recombination function enhances type III restriction. These results led us to hypothesize that the action of type III restriction enzymes takes place on replicated or replicating DNA in vivo and leaves daughter DNAs with breaks at nonallelic sites, that bacteriophage-mediated homologous recombination reconstitutes an intact DNA from them, and that RecBCD exonuclease blocks this repair by degradation from the restriction breaks.     

Single-stranded DNA binding and methylation by EcoP1I DNA methyltransferase

EcoP1I methyltransferase (M.EcoP1I) belongs to the type III restriction-modification system encoded by prophage P1 that infects Escherichia coli. Binding of M.EcoP1I to double-stranded DNA and single-stranded DNA has been characterized. Binding to both single- and double-stranded DNA could be competed out by unlabeled single-stranded DNA. Metal ions did not influence DNA binding. Interestingly, M.EcoP1I was able to methylate single-stranded DNA. Kinetic parameters were determined for single- and double-stranded DNA methylation. This feature of the enzyme probably functions in protecting the phage genome from restriction by type III restriction enzymes and thus could be considered as an anti-restriction system. This study describing in vitro methylation of single-stranded DNA by the type III methyltransferase EcoP1I allows understanding of the mechanism of action of these enzymes and also their role in the biology of single-stranded phages.     

Unusual occurrence of EcoP1 and EcoP15 recognition sites and counterselection of type II methylation and restriction sequences in bacteriophage T7 DNA

Selected and counterselected oligodeoxynucleotide sequences were identified in the total sequence of bacteriophage T7 DNA using a statistical criterion derived for a probability model of the Markov chain type. All extremely rare tetra- and pentadeoxynucleotides are (or contain) recognition sequences for the Escherichia coli DNA methylases dam or dcm. Most of the 37 hexadeoxynucleotides absent from T7 DNA are recognition sequences for type II modification/restriction enzymes of E. coli or related species. In contrast to most restriction sites counterselected during evolution, the EcoP1 site GGTCT occurs 126 times in the T7 genome, and phage T7 replication is severely repressed in P1-lysogenic host cells. We demonstrate that the frequency of the EcoP1 site is determined by that of the overlapping recognition sites for T7 primase, an essential phage enzyme. The recognition site of a type III enzyme, EcoP15, is also not counterselected. In T7 DNA all 36 EcoP15 sites are arranged in such a manner that the sequence CAGCAG is confined to the H strand, the complementary sequence CTGCTG to the L strand. This "strand bias" is highly significant and, therefore, very probably selected. A functional relation between this strand bias and the refractive behaviour of phage T7 to EcoP15 restriction is suspected.     

Functional consequences of mutating conserved SF2 helicase motifs in the Type III restriction endonuclease EcoP15I translocase domain

For efficient DNA hydrolysis, Type III restriction endonuclease EcoP15I interacts with two inversely oriented recognition sites in an ATP-dependent process. EcoP15I consists of two methylation (Mod) subunits and a single restriction (Res) subunit yielding a multifunctional enzyme complex able to methylate or to hydrolyse DNA. Comprehensive sequence alignments, limited proteolysis and mass spectroscopy suggested that the Res subunit is a fusion of a motor or translocase (Tr) domain of superfamily II helicases and an endonuclease domain with a catalytic PD…EXK motif. In the Tr domain, seven predicted helicase motifs (I, Ia, II–VI), a recently discovered Q-tip motif and three additional regions (IIIa, IVa, Va) conserved among Type III restriction enzymes have been identified that are predicted to be involved in DNA binding and ATP hydrolysis. Because DNA unwinding activity for EcoP15I (as for bona fide helicases) has never been found and EcoP15I ATPase rates are only low, the functional importance of the helicase motifs and regions was questionable and has never been probed systematically. Therefore, we mutated all helicase motifs and conserved regions predicted in Type III restriction enzyme EcoP15I and examined the functional consequences on EcoP15I enzyme activity and the structural integrity of the variants by CD spectroscopy. The resulting eleven enzyme variants all, except variant IVa, are properly folded showing the same secondary structure distribution as the wild-type enzyme. Classical helicase motifs I–VI are important for ATP and DNA cleavage by EcoP15I and mutations therein led to complete loss of ATPase and cleavage activity. Among the catalytically inactive enzyme variants three preserved the ability to bind ATP. In contrast, newly assigned motifs Q-tip, Ia and Va are not essential for EcoP15I activity and the corresponding enzyme variants were still catalytically active. DNA binding was only marginally reduced (2–7 fold) in all enzyme variants tested.     

Structural domains in the type III restriction endonuclease EcoP15I: characterization by limited proteolysis, mass spectrometry and insertional mutagenesis

The Type III restriction endonuclease EcoP15I forms a hetero-oligomeric enzyme complex that consists of two modification (Mod) subunits and two restriction (Res) subunits. Structural data on Type III restriction enzymes in general are lacking because of their remarkable size of more than 400 kDa and the laborious and low-yield protein purification procedures. We took advantage of the EcoP15I-overexpressing vector pQEP15 and affinity chromatography to generate a quantity of EcoP15I high enough for comprehensive proteolytic digestion studies and analyses of the proteolytic fragments by mass spectrometry. We show here that in the presence of specific DNA the entire Mod subunit is protected from trypsin digestion, whereas in the absence of DNA stable protein domains of the Mod subunit were not detected. In contrast, the Res subunit is comprised of two trypsin-resistant domains of approximately 77-79 kDa and 27-29 kDa, respectively. The cofactor ATP and the presence of DNA, either specific or unspecific, are important stabilizers of the Res subunit. The large N-terminal domain of Res contains numerous functional motifs that are predicted to be involved in ATP-binding and hydrolysis and/or DNA translocation. The C-terminal small domain harbours the catalytic center. Based on our data, we conclude that both structural Res domains are connected by a flexible linker region that spans 23 amino acid residues. To confirm this conclusion, we have investigated several EcoP15I enzyme mutants obtained by insertion mutagenesis in and around the predicted linker region within the Res subunit. All mutants tolerated the genetic manipulation and did not display loss of function or alteration of the DNA cleavage position.     

Unidirectional translocation from recognition site and a necessary interaction with DNA end for cleavage by Type III restriction enzyme

Type III restriction enzymes have been demonstrated to require two unmethylated asymmetric recognition sites oriented head-to-head to elicit double-strand break 25–27 bp downstream of one of the two sites. The proposed DNA cleavage mechanism involves ATP-dependent DNA translocation. The sequence context of the recognition site was suggested to influence the site of DNA cleavage by the enzyme. In this investigation, we demonstrate that the cleavage site of the R.EcoP15I restriction enzyme does not depend on the sequence context of the recognition site. Strikingly, this study demonstrates that the enzyme can cleave linear DNA having either recognition sites in the same orientation or a single recognition site. Cleavage occurs predominantly at a site proximal to the DNA end in the case of multiple site substrates. Such cleavage can be abolished by the binding of Lac repressor downstream (3′ side) but not upstream (5′ side) of the recognition site. Binding of HU protein has also been observed to interfere with R.EcoP15I cleavage activity. In accordance with a mechanism requiring two enzyme molecules cooperating to elicit double-strand break on DNA, our results convincingly demonstrate that the enzyme translocates on DNA in a 5′ to 3′ direction from its recognition site and indicate a switch in the direction of enzyme motion at the DNA ends. This study demonstrates a new facet in the mode of action of these restriction enzymes.     

Type III restriction endonuclease EcoP15I is a heterotrimeric complex containing one Res subunit with several DNA-binding regions and ATPase activity

For efficient DNA cleavage, the Type III restriction endonuclease EcoP15I communicates with two inversely oriented recognition sites in an ATP-dependent process. EcoP15I consists of methylation (Mod) and restriction (Res) subunits forming a multifunctional enzyme complex able to methylate or to cleave DNA. In this study, we determined by different analytical methods that EcoP15I contains a single Res subunit in a Mod(2)Res stoichiometry. The Res subunit comprises a translocase (Tr) domain carrying functional motifs of superfamily 2 helicases and an endonuclease domain with a PD..D/EXK motif. We show that the isolated Tr domain retains ATP-hydrolyzing activity and binds single- and double-stranded DNA in a sequence-independent manner. To localize the regions of DNA binding, we screened peptide arrays representing the entire Res sequence for their ability to interact with DNA. We discovered four DNA-binding regions in the Tr domain and two DNA-binding regions in the endonuclease domain. Modelling of the Tr domain shows that these multiple DNA-binding regions are located on the surface, free to interact with DNA. Interestingly, the positions of the DNA-binding regions are conserved among other Type III restriction endonucleases.     

Exogenous AdoMet and its analogue sinefungin differentially influence DNA cleavage by R.EcoP15I--usefulness in SAGE

While it has been demonstrated that AdoMet is required for DNA cleavage by Type III restriction enzymes, here we show that in the presence of exogenous AdoMet, the head-to-head oriented recognition sites are cleaved only on a supercoiled DNA. On a linear DNA, exogenous AdoMet strongly drives methylation while inhibiting cleavage reaction. Strikingly, AdoMet analogue sinefungin results in cleavage at all recognition sites irrespective of the topology of DNA. The cleavage reaction in the presence of sinefungin is ATP dependent. The site of cleavage is comparable with that in the presence of AdoMet. The use of EcoP15I restriction in presence of sinefungin as an improved tool for serial analysis of gene expression is discussed.     

DNA supercoiling during ATP-dependent DNA translocation by the type I restriction enzyme EcoAI

Type I restriction enzymes cleave DNA at non-specific sites far from their recognition sequence as a consequence of ATP-dependent DNA translocation past the enzyme. During this reaction, the enzyme remains bound to the recognition sequence and translocates DNA towards itself simultaneously from both directions, generating DNA loops, which appear to be supercoiled when visualised by electron microscopy. To further investigate the mechanism of DNA translocation by type I restriction enzymes, we have probed the reaction intermediates with DNA topoisomerases. A DNA cleavage-deficient mutant of EcoAI, which has normal DNA translocation and ATPase activities, was used in these DNA supercoiling assays. In the presence of eubacterial DNA topoisomerase I, which specifically removes negative supercoils, the EcoAI mutant introduced positive supercoils into relaxed plasmid DNA substrate in a reaction dependent on ATP hydrolysis. The same DNA supercoiling activity followed by DNA cleavage was observed with the wild-type EcoAI endonuclease. Positive supercoils were not seen when eubacterial DNA topoisomerase I was replaced by eukaryotic DNA topoisomerase I, which removes both positive and negative supercoils. Furthermore, addition of eukaryotic DNA topoisomerase I to the product of the supercoiling reaction resulted in its rapid relaxation. These results are consistent with a model in which EcoAI translocation along the helical path of closed circular DNA duplex simultaneously generates positive supercoils ahead and negative supercoils behind the moving complex in the contracting and expanding DNA loops, respectively. In addition, we show that the highly positively supercoiled DNA generated by the EcoAI mutant is cleaved by EcoAI wild-type endonuclease much more slowly than relaxed DNA. This suggests that the topological changes in the DNA substrate associated with DNA translocation by type I restriction enzymes do not appear to be the trigger for DNA cleavage.     

S-adenosyl-L-methionine is required for DNA cleavage by type III restriction enzymes.

The requirement of S-adenosyl-L-methionine (AdoMet) in the cleavage reaction carried out by type III restriction-modification enzymes has been investigated. We show that DNA restriction by EcoPI restriction enzyme does not take place in the absence of exogenously added AdoMet. Interestingly, the closely related EcoP15I enzyme has endogenously bound AdoMet and therefore does not require the addition of the cofactor for DNA cleavage. By employing a variety of AdoMet analogs, which differ structurally from AdoMet, this study demonstrates that the carboxyl group and any substitution at the epsilon carbon of methionine is absolutely essential for DNA cleavage. Such analogs could bring about the necessary conformational change(s) in the enzyme, which make the enzyme proficient in DNA cleavage. Our studies, which include native polyacrylamide gel electrophoresis, molecular size exclusion chromatography, UV, fluorescence and circular dichroism spectroscopy, clearly demonstrate that the holoenzyme and apoenzyme forms of EcoP15I restriction enzyme have different conformations. Furthermore, the Res and Mod subunits of the EcoP15I restriction enzyme can be separated by gel filtration chromatography in the presence of 2 M NaCl. Reconstitution experiments, which involve mixing of the isolated subunits, result in an apoenzyme form, which is restriction proficient in the presence of AdoMet. However, mixing the Res subunit with Mod subunit deficient in AdoMet binding does not result in a functional restriction enzyme. These observations are consistent with the fact that AdoMet is required for DNA cleavage. In vivo complementation of the defective mod allele with a wild-type mod allele showed that an active restriction enzyme could be formed. Furthermore, we show that while the purified c2-134 mutant restriction enzyme is unable to cleave DNA, the c2-440 mutant enzyme is able to cleave DNA albeit poorly. Taken together, these results suggest that AdoMet binding causes conformational changes in the restriction enzyme and is necessary to bring about DNA cleavage.     

Structural insights into the assembly and shape of Type III restriction-modification (R-M) EcoP15I complex by small-angle X-ray scattering

EcoP15I is the prototype of the Type III restriction enzyme family, composed of two modification (Mod) subunits to which two (or one) restriction (Res) subunits are then added. The Mod subunits are responsible for DNA recognition and methylation, while the Res subunits are responsible for ATP hydrolysis and cleavage. Despite extensive biochemical and genetic studies, there is still no structural information on Type III restriction enzymes. We present here small-angle X-ray scattering (SAXS) and analytical ultracentrifugation analysis of the EcoP15I holoenzyme and the Mod(2) subcomplex. We show that the Mod(2) subcomplex has a relatively compact shape with a radius of gyration (R(G)) of ～37.4 ? and a maximal dimension of ～110 ?. The holoenzyme adopts an elongated crescent shape with an R(G) of ～65.3 ? and a maximal dimension of ～218 ?. From reconstructed SAXS envelopes, we postulate that Mod(2) is likely docked in the middle of the holoenzyme with a Res subunit at each end. We discuss the implications of our model for EcoP15I action, whereby the Res subunits may come together and form a "sliding clamp" around the DNA.     

S-adenosyl methionine prevents promiscuous DNA cleavage by the EcoP1I type III restriction enzyme

DNA cleavage by the type III restriction endonuclease EcoP1I was analysed on circular and catenane DNA in a variety of buffers with different salts. In the presence of the cofactor S-adenosyl methionine (AdoMet), and irrespective of buffer, only substrates with two EcoP1I sites in inverted repeat were susceptible to cleavage. Maximal activity was achieved at a Res2Mod2 to site ratio of approximately 1:1 yet resulted in cleavage at only one of the two sites. In contrast, the outcome of reactions in the absence of AdoMet was dependent upon the identity of the monovalent buffer components, in particular the identity of the cation. With Na+, cleavage was observed only on substrates with two sites in inverted repeat at elevated enzyme to site ratios (>15:1). However, with K+ every substrate tested was susceptible to cleavage above an enzyme to site ratio of approximately 3:1, including a DNA molecule with two directly repeated sites and even a DNA molecule with a single site. Above an enzyme to site ratio of 2:1, substrates with two sites in inverted repeat were cleaved at both cognate sites. The rates of cleavage suggested two separate events: a fast primary reaction for the first cleavage of a pair of inverted sites; and an order-of-magnitude slower secondary reaction for the second cleavage of the pair or for the first cleavage of all other site combinations. EcoP1I enzymes mutated in either the ATPase or nuclease motifs did not produce the secondary cleavage reactions. Thus, AdoMet appears to play a dual role in type III endonuclease reactions: Firstly, as an allosteric activator, promoting DNA association; and secondly, as a "specificity factor", ensuring that cleavage occurs only when two endonucleases bind two recognition sites in a designated orientation. However, given the right conditions, AdoMet is not strictly required for DNA cleavage by a type III enzyme.     

Characterization of the Type III restriction endonuclease PstII from Providencia stuartii

A new Type III restriction endonuclease designated PstII has been purified from Providencia stuartii. PstII recognizes the hexanucleotide sequence 5′-CTGATG(N)_25-26/27-28-3′. Endonuclease activity requires a substrate with two copies of the recognition site in head-to-head repeat and is dependent on a low level of ATP hydrolysis (~40 ATP/site/min). Cleavage occurs at just one of the two sites and results in a staggered cut 25–26 nt downstream of the top strand sequence to generate a two base 5′-protruding end. Methylation of the site occurs on one strand only at the first adenine of 5′-CATCAG-3′. Therefore, PstII has characteristic Type III restriction enzyme activity as exemplified by EcoPI or EcoP15I. Moreover, sequence asymmetry of the PstII recognition site in the T7 genome acts as an historical imprint of Type III restriction activity in vivo. In contrast to other Type I and III enzymes, PstII has a more relaxed nucleotide specificity and can cut DNA with GTP and CTP (but not UTP). We also demonstrate that PstII and EcoP15I cannot interact and cleave a DNA substrate suggesting that Type III enzymes must make specific protein–protein contacts to activate endonuclease activity.     

Restriction by EcoKI is enhanced by co-operative interactions between target sequences and is dependent on DEAD box motifs.

One subunit of both type I and type III restriction and modification enzymes contains motifs characteristic of DEAD box proteins, which implies that these enzymes may be DNA helicases. This subunit is essential for restriction, but not modification. The current model for restriction by both types of enzyme postulates that DNA cutting is stimulated when two enzyme complexes bound to neighbouring target sequences meet as the consequence of ATP-dependent DNA translocation. For type I enzymes, this model is supported by in vitro experiments, but the predicted co-operative interactions between targets have not been detected by assays that monitor restriction in vivo. The experiments reported here clearly establish the required synergistic effect but, in contrast to earlier experiments, they use Escherichia coli K-12 strains deficient in the restriction alleviation function associated with the Rac prophage. In bacteria with elevated levels of EcoKI the co-operative interactions are obscured, consistent with co-operation between free enzyme and that bound at target sites. We have made changes in three of the motifs characteristic of DEAD box proteins, including motif III, which in RecG is implicated in the migration of Holliday junctions. Conservative changes in each of the three motifs impair restriction.