Disposable DNA electrochemical sensor for hybridization detection

A disposable electrochemical sensor for the detection of short DNA sequences is described. Synthetic single-stranded oligonucleotides have been immobilized onto graphite screen printed electrodes with two procedures, the first involving the binding of avidinbiotinylated oligonucleotide and the second adsorption at a controlled potential. The probes were hybridized with different concentrations of complementary sequences. The formed hybrids on the electrode surface were evaluated by differential pulse voltammetry and chronopotentiometric stripping analysis using daunomycin hydrochloride as indicator of hybridization reaction. The probe immobilization step, the hybridization event and the indicator detection, have been optimized. The DNA sensor obtained by adsorption at a controlled potential was able to detect 1 microgram/ml of target sequence in the buffer solution using chronopotentiometric stripping analysis.     

Gold nano particle decorated graphene core first generation PAMAM dendrimer for label free electrochemical DNA hybridization sensing

A novel first generation (G1) poly(amidoamine) dendrimer (PAMAM) with graphene core (GG1PAMAM) was synthesized for the first time. Single layer of GG1PAMAM was immobilized covalently on mercaptopropionic acid (MPA) monolayer on Au transducer. This allows cost effective and easy deposition of single layer graphene on the Au transducer surface than the advanced vacuum techniques used in the literature. Au nano particles (17.5 nm) then decorated the GG1PAMAM and used for electrochemical DNA hybridization sensing. The sensor discriminates selectively and sensitively the complementary double stranded DNA (dsDNA, hybridized), non-complementary DNA (ssDNA, un-hybridized) and single nucleotide polymorphism (SNP) surfaces. Interactions of the MPA, GG1PAMAM and the Au nano particles were characterized by Ultra Violet (UV), Fourier Transform Infrared (FTIR), Raman spectroscopy (RS), Thermo gravimetric analysis (TGA), Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), Cyclic Voltmetric (CV), Impedance spectroscopy (IS) and Differntial Pulse Voltammetry (DPV) techniques. The sensor showed linear range 1×10(-6) to 1×10(-12) M with lowest detection limit 1 pM which is 1000 times lower than G1PAMAM without graphene core.     

Cu@Au alloy nanoparticle as oligonucleotides labels for electrochemical stripping detection of DNA hybridization

Synthesis of the novel Cu@Au alloy nanoparticle and its application in an electrochemical DNA hybridization detection assay is described in this article. We report a low-temperature method for generating core-shell particles consisting of a core of Cu and a thin layer of Au shell that can be readily functionalized with oligonucleotides. Core-shell Cu@Au particles were successfully labeled to a 5'-alkanethiol capped oligonucleotides probe that is related to the colitoxin gene. The DNA genetic sensing assay relies on the electrostatic adsorption of target oligonucleotides onto conducting polypyrrole (PPy) surface at the glassy carbon electrode (GCE), and its hybridization to the alloy particle-oligonucleotides DNA probe. Hybridization events between probe and target were monitored by the release of the copper metal atoms anchored on the hybrids by oxidative metal dissolution and the indirectly determination of the solubilized Cu2+ ions by sensitive anodic stripping voltammetry (ASV). The detection limit is 5.0 pmol l(-1) of target oligonucleotides. The Cu@Au core-shell nanoparticles combining the surface modification properties of Au with the good electrochemical activity of Cu core shows their perspective application in the electrochemical DNA hybridization analysis assay.     

Multiply osmium-labeled reporter probes for electrochemical DNA hybridization assays: detection of trinucleotide repeats

In electrochemical DNA hybridization assays target or probe DNAs end-labeled with electroactive compounds have been frequently used. We show that multiple osmium labels yielding faradaic (at carbon or mercury electrodes) and catalytic signals (at mercury electrodes) can be easily covalently bound to DNA molecules. We use (GAA)(7) (T)(n) oligodeoxynucleotides (ODNs) with n ranging between 5 and 50. (T)(n) tails are selectively modified with osmium tetroxide,2,2'-bipyridine leaving the (GAA)(7) repeat intact for the DNA hybridization. These ODNs are applied as reporter probes (RP's) in DNA hybridization double-surface (DS) assay using magnetic beads for the DNA hybridization and pyrolytic graphite (PGE) or hanging mercury drop (HMDE) electrodes for the electrochemical detection. We show that in difference to the usual single-surface methods (where the RP has to be bound to target DNA near to the surface to communicate with the electrode) in the DS assay the RP can be bound to DNA regardless of its position and can used for the determination of the length of DNA repetitive sequences. Several fmols or about a hundred of amol of a RP with osmium-labeled (T)(50) tail can be detected at PGE and HMDE, respectively, at 1-2 min accumulation time.     

Spin label detection and free radical nature of DNA damage by hydralazine.

1. Incubation with hydralazine was shown to induce degradative changes of calf thymus DNA spin-labeled with 3-(2-bromoacetamido)-2,2,5,5-tetramethyl-1-pyrrolidono-1-oxyl and 4-(2-bromoacetamido)-2,2,6,6-tetramethylpiperidino-1-oxyl detectable from electron spin resonance specta. 2. Hydralazine, especially in the presence of Fe2+ induced formation of thiobarbituric acid (TBA)-reactive DNA degradation products. 3. The formation of TBA-reactive products was prevented by catalase, EDTA and scavengers of .OH radicals and enhanced by superoxide dismutase which suggests that .OH radicals formed by the Fenton mechanism mediate the DNA damage by hydralazine-Fe2+.     

Impedimetric immunosensor for the specific label free detection of ciprofloxacin antibiotic

Impedance spectroscopy approaches combined with the immunosensor technology have been used for the determination of trace amounts of ciprofloxacin antibiotic belonging to the fluoroquinolone family. The sensor electrode was based on the immobilization of anti-ciprofloxacin antibodies by chemical binding onto a poly(pyrrole-NHS) film electrogenerated on a solid gold substrate. The electrode surface was modified by electropolymerization of pyrrole-NHS, antibody grafting and ciprofloxacin immunoreaction. The sensitive steps of surface modification, cyclic voltammetry (CV) and atomic force microscopy (AFM) imaging have been used for electrode surface characterization. The immunoreaction of ciprofloxacin on the grafted anti-ciprofloxacin antibody directly triggers a signal via impedance spectroscopy measurements which allows the detection of extremely low concentration of 10 pg/ml ciprofloxacin.     

Gold coated ferric oxide nanoparticles based disposable magnetic genosensors for the detection of DNA hybridization processes

In this article, a disposable magnetic DNA sensor using an enzymatic amplification strategy for the detection of specific hybridization processes, based on the coupling of streptavidin-peroxidase to biotinylated target sequences, has been developed. A thiolated 19-mer capture probe was attached to gold coated ferric oxide nanoparticles and hybridization with the biotinylated target was allowed to proceed. Then, a streptavidin-peroxide was attached to the biotinylated target and the resulting modified gold coated ferric oxide nanoparticles were captured by a magnetic field on the surface of a home-made carbon screen printed electrode (SPE). Using hydroquinone as a mediator, a square wave voltammetric procedure was chosen to detect the hybridization process after the addition of hydrogen peroxide. Different aspects concerning the assay protocol and nanoparticles fabrication were optimized in order to improve the sensitivity of the developed methodology. A low detection limit (31 pM) with good stability (RSD=7.04%, n=10) was obtained without the need of polymerase chain reaction (PCR) amplification.     

Esterase 2-oligodeoxynucleotide conjugates as sensitive reporter for electrochemical detection of nucleic acid hybridization

A thermostable, single polypeptide chain enzyme, esterase 2 from Alicyclobacillus acidocaldarius, was covalently conjugated in a site specific manner with an oligodeoxynucleotide. The conjugate served as a reporter enzyme for electrochemical detection of DNA hybridization. Capture oligodeoxynucleotides were assembled on gold electrode via thiol-gold interaction. The esterase 2-oligodeoxynucleotide conjugates were brought to electrode surface by DNA hybridization. The p-aminophenol formed by esterase 2 catalyzed hydrolysis of p-aminophenylbutyrate was amperometrically determined. Esterase 2 reporters allows to detect approximately 1.5 x 10(-18)mol oligodeoxynucleotides/0.6 mm2 electrode, or 3 pM oligodeoxynucleotide in a volume of 0.5 microL. Chemically targeted, single site covalent attachment of esterase 2 to an oligodeoxynucleotide significantly increases the selectivity of the mismatch detection as compared to widely used, rather unspecific, streptavidin/biotin conjugated proteins. Artificial single nucleotide mismatches in a 510-nucleotide ssDNA could be reliably determined using esterase 2-oligodeoxynucleotide conjugates as a reporter.     

Electro-optical behaviour of CuFe2O4@rGO nanocomposite for nonenzymatic detection of uric acid via the electrochemical method

Uric acid (UA) is a blood and urine component obtained as a metabolic by-product of purine nucleotides. Abnormalities in UA metabolism cause crystal deposition as monosodium urate and lead to various diseases such as gout, hyperuricemia, Lesch–Nyhan syndrome, etc. Monitoring these diseases requires a rapid, sensitive, selective, and portable detection approach. Therefore, this study demonstrates the hydrothermal synthesis of CuFe₂O₄/reduced graphene oxide (rGO) nanocomposite for selective detection of UA. After the nanocomposite synthesis, characterization was performed by X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, UV–visible spectrometry, atomic force spectroscopy, scanning electron microscopy, and electrochemical analysis. Furthermore, from the electrochemical analysis using cyclic voltammetry (CV), kinetic studies were carried out by varying the scan rate to obtain the diffusion coefficient, surface concentration, and rate of charge transfer to achieve a calibration curve that indicates the quasi reversible nature of the fabricated electrode with a linear regression coefficient of oxidation (R²: 0.9992) and reduction (R²: 0.9971) peaks. Moreover, the fabricated nonenzymatic amperometric sensor to detect UA with a linearity (R²: 0.9989) of 1–400 μM was highly sensitive (2.75 × 10⁻⁴ mAμM⁻¹ cm⁻²) and had a lower limit of detection (0.01231 μM) at pH 7.5 in phosphate-buffered saline solution. Therefore, the CuFe₂O₄/rGO/ITO-based nonenzymatic sensor could detect interfering agents and spiked real bovine serum samples with higher sensitivity and selectivity for UA detection.     

Chitosan-iron oxide nano-composite platform for mismatch-discriminating DNA hybridization for Neisseria gonorrhoeae detection causing sexually transmitted disease

Electrochemically fabricated nano-composite film of chitosan (CH)-iron oxide (Fe(3)O(4)) has been used to detect gonorrhoea, a sexually transmitted disease (STD) via immobilization of biotinylated probe DNA (BDNA) using avidin-biotin coupling for rapid and specific (mismatch-discriminating) DNA hybridization. The presence of Fe(3)O(4) nanoparticles (～18nm) increases the electro-active surface area of the nano-biocomposite that provides desirable environment for loading of DNA with better conformation leading to increased electron transfer kinetics between the medium and electrode. The differential pulse voltammetric (DPV) studies have been conducted using BDNA/avidin/CH-Fe(3)O(4)/ITO electrode owing to the reduction of the methylene blue (MB) indicator and investigate electron transfer between MB moieties and electrode for one and two-bases mismatch. This STD biosensor is found to have a detection limit (1 × 10(-15)M) and a wide dynamic range (from 1 × 10(-16)M to 1 × 10(-6)M) using the complementary target DNA. In addition, the sensing system can be utilized to accurately discriminate complementary sequence from mismatch sequences.     

A microfluidic-based electrochemical biochip for label-free diffusion-restricted DNA hybridization analysis

DNA hybridization detection in microfluidic devices can reduce sample volumes, processing times, and can be integrated with other measurements. However, as device footprints decrease and their complexity increase, the signal-to-noise ratio in these systems also decreases and the sensitivity is thereby compromised. Device miniaturization produces distinct properties and phenomena with greater influence at the micro-scale than at the macro-scale. Here, a diffusion-restriction model was applied to a miniaturized biochip nanovolume reactor to accurately characterize DNA hybridization events that contribute to shifts in both charge transfer resistance and diffusional resistance. These effects are shown to play a significant role in electrochemical impedance spectroscopy (EIS) analyses at these length scales. Our highly functional microfluidic biosensor enables the detection of ssDNA targets selectively, with a calculated detection limit of 3.8 nM, and cross-reactivity of 13% following 20 min incubation with the target. This new biosensing approach can be further modeled and tested elucidating diffusion behavior in miniaturized devices and improving the performance of biosensors.     

DNA duplex membrane effect for the electrochemical detection of single-base DNA mutations

Here we report a new method to detect DNA point mutations. The method is based on the formation and deformation of double-stranded DNA (dsDNA) membranes on a gold surface. It can encage reporter molecules between the gold surface and the double-stranded DNA or keep them away from the gold surface. In these systems, Fe(CN)₆ ³⁻ was used as the reporter. As the temperature increases, a sharp electrochemical signal change in the melting curve of wild-type dsDNA appears. At a special temperature, the method gives 100:1 selectivity for the perfect complement and single base mutation target. Thus, the system provides a simple and sensitive method to detect DNA point mutations without labeling targets. __________ Translated from Acta Biophysica Sinica 2005, 21 (2) [译 自: 生物物理学报, 2005,21(2)]     

DNA duplex membrane effect for the electrochemical detection of single-base DNA mutations

Here we report a new method to detect DNA point mutations.The method is based on the formation and deformation of double-stranded DNA(dsDNA)membranes on a gold surface.It can encage reporter molecules between the gold surface and the double-stranded DNA or keep them away from the gold surface.In these systems,Fe(CN)63- was used as the reporter.As the temperature increases,a sharp electrochemical signal change in the melting curve of wild-type dsDNA appears.At a special temperature,the and single base mutation target.Thus,the system provides a simple and sensitive method to detect DNA point mutations without labeling targets.     

双链DNA 膜效应在序列点突变电化学检测中的应用

报道一种基于金表面的双链DNA膜效应检测DNA点突变的新方法。致密的双链DNA分子层可以将电化学信号分子禁闭在金表面和双链DNA之间,或者将信号分子与金表面隔离开,使其无法接触裸金面．在实验系统中采用Fe(CN）6^3-为信号分子,在升高温度时,双链DNA膜被破坏,信号分子离开或接触金表面,解链曲线会出现一个陡峭的电化学信号变化。在特定的温度下,完全互补的序列和单碱基点突变的序列的信号比达到了100：1。这种方法简单而且灵敏,同时避免了复杂的共价修饰信号分子的过程。     

Using exonuclease III to enhance electrochemical detection of natural DNA damage in layered films

The natural double-stranded DNA (dsDNA) was immobilized on electrode surface by layer-by-layer assembly, forming PSS/PDDA/dsDNA films (PSS, poly(styrene-sulfonate); PDDA, poly(diallyldimethylammonium)), and used to detect DNA damage electrochemically. The DNA lesion induced by the alkylating agent methyl methanesulfonate (MMS) could be detected by cyclic voltammetry with ruthenium(II) tris(2,2'-bipyridyl) (Ru(bpy)(3)(2+)) in solution. After treated by E. coli exonuclease III enzyme, the electrocatalytic oxidation peak of the films was further amplified and greatly enhanced because the enzyme could convert those apurinic sites caused by MMS in the damaged dsDNA into single-stranded DNA regions and make more guanines in the DNA become exposed. This approach provided a novel idea for constructing DNA biosensor in sensitive screening of genetoxic chemicals in vitro.     

The label free picomolar detection of insulin in blood serum

Insulin, a polypeptide hormone secreted by pancreatic cells, is a key regulator in glucose homeostasis. Its deficiency leads to insulin-dependent (type I) diabetes whereas resistance to insulin is common in type II diabetes, obesity and a range of endocrine disorders. Its determination is of considerable value, particularly in the clinical diagnosis of diabetes mellitus and the doping control of athletes. It has, additionally, been noted as a potential breast cancer marker (serum insulin levels being found to be raised in comparison to control patients). Electrochemical assays are potentially very cheap, highly sensitive, and very readily transposed to a point of care. Though there exist numerous examples of label free impedimetric or capacitative assaying of biomolecules, these are rarely demonstrated to be effective in complex biological mixtures or to be applicable to low molecular weight targets (since they operate through the interfacial displacement of water/ions and/or the steric blocking of a redox probe). We report herein an ultrasensitive electrochemical and label-free biosensor for insulin in blood serum with a clinically relevant linear range and detection limit of 1.2pM. The transducing surfaces, based on readily prepared, antibody modified, polyethylene glycol monolayer modified polycrystalline gold surfaces, respond in a highly specific and re-useable manner to the target in up to 50% blood serum.     

Direct electrochemical sensor for fast reagent-free DNA detection

A novel reagentless direct electrochemical DNA sensor has been developed using ultrathin films of the conducting polymer polypyrrole doped with an oligonucleotide probe. Our goal was to develop a prototype electrochemical DNA sensor for detection of a biowarfare pathogen, variola major virus. The sensor has been optimized for higher specificity and sensitivity. It was possible to detect 1.6 fmol of complementary oligonucleotide target in 0.1 ml in seconds by using chronoamperometry. The sensitivity of the developed sensor is comparable to indirect electrochemical DNA sensors, which use electrochemical labels and reagent-intensive amplification. The developed sensing electrode is reusable, highly stable and suitable for storage in solution or in dry state.