Fast and efficient method for detection and estimation of proteins

A quick, simple, inexpensive and sensitive method is described to stain and quantitate proteins on nitrocellulose papers. The proteins may be spotted or transferred from polyacrylamide gels by Western blotting. The procedure involves non-radioactive iodination of the polypeptides by chloramine T and potassium iodide followed by detection of bound iodine with starch. The method is more sensitive and much quicker than Coomassie brilliant blue staining and may be used for quantitation or detection of proteins in unknown samples. Another major advantage of this procedure is that ionic or nonionic detergents, although at higher concentrations causing the sample to disperse more broadly in the membranes, do not affect the staining procedure. Further, this method may be used for detection of proteins bound to papers that have high affinity for proteins such as the Zeta probe membranes.     

A colloidal silver staining--destaining method for precise assignment of immunoreactive spots in two-dimensional protein patterns

The characterization of protein expression patterns by two-dimensional gel electrophoresis depends on efficient and reliable identification strategies for target spots. In addition to sophisticated techniques, such as microsequencing and peptide mass spectrometry, immunodetection of membrane-immobilized proteins is a valuable method with which to identify the corresponding spots for a given set of candidate proteins. To precisely assign immunoreactive spots, this approach requires specific immunodetection and staining of total protein to be performed on the same membrane. Here, we describe a highly sensitive, colloidal silver-based method for the assignment of immunoreactive spots in two-dimensional protein patterns. This simple and rapid procedure involves a destaining step after staining of nitrocellulose-bound proteins with colloidal silver. We show that destaining of proteins is a prerequisite for subsequent immunodetection using enhanced chemiluminescence. Several types of antibodies were successfully employed for antigen detection after the staining-destaining procedure. Our results demonstrate that the colloidal silver-based method is generally applicable for the unambiguous identification of candidate proteins in complex two-dimensional patterns.     

A comparison of silver staining methods for detecting proteins in ultrathin polyacrylamide gels on support film after isoelectric focusing

The application of silver staining methods to the detection of proteins on ultrathin isoelectric focusing gel systems requires the optimization of many steps in the procedure in order to obtain reproducible staining of proteins with acceptable levels of background. Three different methods which have been reported for detecting proteins by silver staining in sodium dodecyl sulfate-polyacrylamide gel systems were investigated. A major problem with staining ultrathin isoelectric focusing gels was found to be surface staining that was associated with gels cast on support films. A modification of the method of Poehling and Neuhoff (H.-M. Poehling and V. Neuhoff, 1981, Electrophoresis 2, 141-147) was found to give the best results.     

India ink staining of proteins on nylon and hydrophobic membranes

India ink was found to be an acceptable stain for proteins blotted or dotted onto positively charged nylon or hydrophobic membranes. The hydrophobic membrane, Immobilon, was an outstanding matrix for binding proteins and displayed low levels of background staining. The least amount of protein detected by india ink staining was between 1.0 and 10 ng. India ink staining of proteins on nylon membranes is an easy, inexpensive, and quick method for the unequivocal detection of both standards and unknowns in the same blot. However, inks, ink concentrations, fixing conditions, staining times, pH, washing conditions, and membrane lots all need to be controlled to achieve maximum sensitivity for protein detection following india ink staining.     

A method for detecting proteins immobilized on nitrocellulose membranes by in situ derivatization with fluorescein isothiocyanate

A method for the fluorescent staining of proteins on nitrocellulose filters is described. The single step procedure uses a 100 microgram/ml solution of fluorescein isothiocyanate in sodium carbonate buffer, pH 9.5. The proteins are visible under uv light within 30 s and the staining reaction is virtually complete after 10 min. The method can detect a minimum of 50 ng protein/band providing a sensitivity similar to that obtained with anionic dye stains. The method is suitable for blots prepared from both isoelectric focusing gels and sodium dodecyl sulfate-polyacrylamide gels. The fluorescently labeled proteins can be probed using immunochemical techniques with the retention of fluorescence. The method can therefore be used to accurately locate antigens among a number of proteins and allows the sensitive and rapid detection of marker proteins directly on the blot.     

General detection of proteins after electroblotting by trinitrobenzene sulphonic acid derivatization and immunochemical staining with a monoclonal antibody against the trinitrophenyl group

A sensitive method for the general detection of proteins electroblotted onto nitrocellulose sheets after separation by sodium dodecyl sulfate-polyacrylamide gel electrophoresis is described. The proteins on the blots were reacted with 2,4,6-trinitrobenzene sulphonic acid. The resulting trinitrophenyl groups on the proteins were rendered visible by immunochemical staining with a monoclonal anti-trinitrophenyl antibody, and a peroxidase-conjugated second antibody. Using various proteins, the method was compared to the amidoblack method for staining of protein blots. The method was 10-100-fold more sensitive than the amidoblack method. Amounts as low as 1 ng of human serum albumin could be detected.     

A colorimetric assay specific for gamma-carboxyglutamic acid-containing proteins: its utility in protein purification procedures

A colorimetric method for the detection of gamma-carboxyglutamic acid (Gla)-containing proteins after reaction with 4-diazobenzenesulfonic acid is presented. Proteins can be visualized after electroblotting from polyacrylamide gels onto membrane supports, after dot-blotting onto membranes, or in solution as a red colored product with an absorbance maximum at 530 nm. The method is specific since other proteins without gamma-carboxyglutamic acid do not form a red color. The presence of other proteins does not inhibit or affect color production by gamma-carboxyglutamic acid-containing proteins. Application of the method for staining a Western blot of a crude extract of bone resulted in staining of only the gamma-carboxyglutamic acid-containing proteins. The usefulness of the method was verified when a second gamma-carboxyglutamic acid-containing protein, prothrombin, also resulted in red color production. A linear color response is seen up to 17 microM for the gamma-carboxyglutamic acid-containing protein bone Gla protein and up to 27 microM for the amino acid. The detection limit is down to 1 microgram of bone Gla protein or 0.17 nmol of the protein on electroblots or dot blots. The simplicity of the method allows rapid screening for gamma-carboxyglutamic acid-containing proteins or allows monitoring of purifications of these proteins in chromatographic or electrophoretic separations.     

Quantification of proteins in the subnanogram and nanogram range: comparison of the AuroDye, FerriDye, and India ink staining methods

The usefulness of three sensitive dyes, AuroDye, FerriDye, and India ink, for the quantification of proteins and peptides bound to nitrocellulose paper has been assessed. In general, the staining intensity varies linearly with the logarithm of protein concentrations. The detection limit of small peptides (Mr less than 5000) is higher than that of large peptides and proteins, but the sensitivity is independent of the molecular weight. Oligopeptides of four or less amino acids either stain with very high detection limits or do not stain at all. The detection limit of proteins stained by AuroDye is approximately 1 ng, and in a number of cases even lower. The useful range for quantification of proteins extends to around 100 ng. The FerriDye and India ink staining methods are less sensitive and can be used to quantify proteins over a wide nanogram range. Among the methods tested, the India ink staining method has the highest protein to protein variation in sensitivity.     

Direct chemiluminescent imaging detection of human serum proteins in two-dimensional polyacrylamide gel electrophoresis

A novel chemiluminescence (CL)-based imaging method capable of directly detecting proteins in polyacrylamide gels after electrophoresis is proposed. Human serum proteins are presently detected by a direct CL imaging method after native 2-D PAGE. As a consequence, some proteins, including haptoglobin (Hp), Hp precursor, hemopexin (Hpx) precursor, Ig alpha-1 chain C region, and Complement C3 precursor can be detected and identified by MS and MS/MS techniques. These proteins are all acute phase proteins, which have been defined as biomarkers for certain diseases. Moreover, serum proteins from healthy people and cirrhotic patients were analyzed. A decrease in Hp spots for cirrhotic patients could be confirmed. The CL imaging conditions were optimized, including the concentrations of H(2)O(2) and luminol. The process of CL detection of proteins is simple, and there is no need for specialized equipment. In comparison with the traditional CBB-R250 staining method, the detection sensitivity was improved and the detection period decreased about 70 times. Hence, this technique possesses potentials as a rapid, convenient, and inexpensive analytical technique for protein detection and for the diagnosis of diseases.     

Design and synthesis of ICT-based fluorescent probe for high-sensitivity protein detection and application to rapid protein staining for SDS-PAGE

A novel fluorescent molecular probe possessing styryl, sulfonyl, and cyanopyranyl moieties that was termed compound 1 was designed and synthesized to detect proteins through noncovalent bonding. Compound 1 did not produce fluorescence emission in the absence of proteins. However, its fluorescence spectrum showed a dramatic increase in the fluorescence intensity and strong orange emission after the addition of BSA. These changes were caused by intramolecular charge transfer (ICT). The fluorescence intensities of compound 1 were plotted as a function of the protein concentrations. A good linear relationship was observed up to a protein concentration of 325 mug/mL, and the detection limit was 70 ng/mL under the given assay conditions; this detection limit was higher than that of previously reported compounds. To demonstrate the application of compound 1, proteins in an SDS-PAGE gel were stained with compound 1 and were successfully imaged with a higher sensitivity and shorter staining operation time as compared to those of the silver staining method and SYPRO Ruby staining method. Thus, easy and high-sensitivity protein detection can be performed with the fluorescent probe, and this probe is ideally suited to proteomic applications.     

Development of polyacrylamide gels that improve the separation of proteins and their detection by silver staining

Background staining that is associated with silver detection of proteins and nucleic acids in polyacrylamide gels has been shown to be due mostly to the amide groups in methylenebisacrylamide, a commonly used gel crosslinker. In attempts to reduce this background staining, eight existing crosslinking agents were tested. All of these proved to be unsuitable. Six new crosslinking agents were synthesized and tested. Of these, diacrylylpiperazine provided increased physical strength, improved electrophoretic separation of proteins, and silver staining detection of proteins with reduced background stain.     

Visible fluorescent detection of proteins in polyacrylamide gels without staining

2,2,2-Trichloroethanol (TCE) incorporated into polyacrylamide gels before polymerization provides fluorescent visible detection of proteins in less than 5min of total processing time. The tryptophans in proteins undergo an ultraviolet light-induced reaction with trihalocompounds to produce fluorescence in the visible range so that the protein bands can be visualized on a 300-nm transilluminator. In a previous study trichloroacetic acid or chloroform was used to stain polyacrylamide gel electrophoresis (PAGE) gels for protein visualization. This study shows that placing TCE in the gel before electrophoresis can eliminate the staining step. The gel is removed from the electrophoresis apparatus and placed on a transilluminator and then the protein bands develop their fluorescence in less than 5min. In addition to being rapid this visualization method provides detection of 0.2microg of typical globular proteins, which for some proteins is slightly more sensitive than the standard Coomassie brilliant blue (CBB) method. Integral membrane proteins, which do not stain well with CBB, are visualized well with the TCE in-gel method. After TCE in-gel visualization the same gel can then be CBB stained, allowing for complementary detection of proteins. In addition, visualization with TCE in the gel is compatible with two-dimensional PAGE, native PAGE, Western blotting, and autoradiography.     

Colloidal Silver Staining of Electroblotted Proteins for High Sensitivity Peptide Mapping by Liquid Chromatography–Electrospray Ionization Tandem Mass Spectrometry

Mass spectrometric techniques for the identification of proteins either by amino acid sequencing or by correlation of mass spectral data with sequence databases are becoming increasingly sensitive and are rapidly approaching the limit of detection achieved by the staining of proteins in gels or, after electroblotting, on membranes. Here we present a technique for the sensitive staining of proteins electroblotted onto nitrocellulose or polyvinylidene difluoride membranes and enzymatic cleavage conditions for such proteins to achieve optimal recovery of peptides. The technique is based on the deposition of colloidal silver on the membrane-bound proteins. Peptide mixtures generated by proteolysis on the membrane were recovered at high yields and were compatible with analysis by reverse-phase chromatography and on-line electrospray ionization mass spectrometry. This simple and rapid colloidal silver staining procedure allowed the visualization of less than 5 ng of protein in a band and thus approached the sensitivity of silver staining in gels. We demonstrate that this method allows the detection of subpicomole amounts of electroblotted proteins and their identification by high-performance liquid chromatography–electrospray ionization tandem mass spectrometry.     

Detection of biotinylated proteins in polyacrylamide gels using an avidin-fluorescein conjugate

Biotinylated proteins are widely used as a molecular tool in biotechnological applications. In this paper, we demonstrated that biotinylated proteins after electrophoresis were detected directly in gels using an avidin-fluorescein conjugate with a fluorescence image analyzer. Upon analysis of the purified and chemically biotinylated protein, the sensitivity of this method was almost equal to that of silver staining. Chemically biotinylated proteins of Escherichia coli cell surfaces could also be specifically detected with our method. Furthermore, recombinant proteins fused with the biotin acceptor domain and biotinylated enzymatically in vivo were also detected in a lysate of E. coli specifically. The sensitivity and specificity of our method are high, and the procedure is simple. Therefore, our method would benefit detection of biotinylated proteins via gel electrophoresis and also various fields of study using avidin-biotin technology.     

Detection of S-glutathionylated proteins by glutathione S-transferase overlay

Oxidative and nitrosative stress lead to the S-glutathionylation of proteins and subsequent functional impairment. Glutathione S-transferase (GST) from Schistosoma japonicum was found to bind to the glutathione moiety of S-glutathionylated proteins, thus establishing a convenient method for detecting S-glutathionylated proteins by biotinylated GST. Applications of this method to proteins that were prepared from cultured cells and blotted onto a membrane exhibited numerous positive bands, which were abolished by treatment with dithiothreitol. Treatment of a cellular extract with nitrosoglutathione led to enhanced staining of the bands in a dose-dependent manner. The method was also applicable for the histochemical detection of S-glutathionylated proteins in situ. The positive staining by biotin-GST became faint in the presence of S-glutathionylated ovalbumin, suggesting that the reaction is specific to S-glutathionylated proteins. Collectively, these data indicate that the method established here is simple and useful for detecting S-glutathionylated proteins on blotted membrane and in situ.     

Improvements and simplifications in in-gel fluorescent detection of proteins using ruthenium II tris-(bathophenanthroline disulfonate): the poor man's fluorescent detection method

Fluorescent detection of proteins is a popular method of detection allying sensitivity, linearity and compatibility with mass spectrometry. Among the numerous methods described in the literature, staining with ruthenium II tris(bathophenanthroline disulfonate) is particularly cost-effective, but slightly cumbersome owing to difficulties in the preparation of the complex and complexity of staining protocols. We describe here the modifications on both aspects that allow to perform a higher contrast staining and offer a more robust method of complex preparation, thereby maximizing the advantages of the method.     

Quantitation of protein on gels and blots by infrared fluorescence of Coomassie blue and Fast Green

Coomassie blue staining of gels and blots is commonly employed for detection and quantitation of proteins by densitometry. We found that Coomassie blue or Fast Green FCF bound to protein fluoresces in the near infrared. We took advantage of this property to develop a rapid and sensitive method for detection and quantitation of proteins in gels and on blots. The fluorescence response is quantitative for protein content between 10 ng and 20 microg per band or spot. Staining and destaining require only 30 min, and the method is compatible with subsequent immunodetection.     

Vertical slab gel electrophoresis on a large number of samples: an apparatus with the capacity for central cooling

Following horizontal electroelution, or blotting, of proteins from polyacrylamide gels to immobilizing matrices, such as nitrocellulose or Zeta-bind paper, the transferred proteins can be derivatized in situ with pyridoxal 5'-phosphate and sodium borohydride. After a quenching step to eliminate nonspecific binding of antibody to the protein-binding matrix, the blot is incubated with a solution containing a mouse monoclonal antibody specific for the 5'-phosphopyridoxyl group. The transferred proteins can then be located on the blot with second antibody staining procedures employing either a peroxidase-linked goat anti-mouse F(ab')2 antibody or a peroxidase-linked avidin/biotin system. The solid-phase enzyme-linked immunosorbent assay method described in this report is a mild, general, and sensitive immunochemical method for the detection of proteins on protein-binding matrices.     

Detection of the low density lipoprotein (LDL) receptor on nitrocellulose paper with colloidal gold-LDL conjugates

Gold-low density lipoprotein (LDL) conjugates were used to detect the LDL receptor on nitrocellulose paper. Solubilized rat liver membrane proteins were subjected to electrophoresis and electroblotted onto nitrocellulose paper. The receptor was then detected as a red band (within 10 min) by overlaying with the LDL conjugates. The coloration was prevented by unlabeled LDL, EDTA, and suramin but not by unlabeled HDL3. In the dot blot assay, detection with the colloidal gold-LDL conjugates was as sensitive as both the autoradiographic method with 125I-labeled LDL and the biotinylated LDL method; the estimated limit of detection by scanning densitometry was 1.6 femtomoles of receptor protein. When the coloration obtained with the colloidal gold-LDL conjugates was intensified by photochemical silver staining, down to 200 attomoles of the LDL receptor could be detected. In this assay, the EDTA-sensitive binding of colloidal gold-LDL to solubilized hepatic membrane proteins was 12 times higher for rats treated with 17 alpha-EE than for normal rats. The use of colloidal gold-LDL conjugates is therefore a very easy, safe, inexpensive, fast and sensitive method for the detection of the LDL receptor on nitrocellulose paper. Furthermore, with silver staining and scanning densitometry, the colloidal gold-LDL conjugates could be used in a dot blot assay to quantify tissue and cell LDL receptors down to attomolar levels.