Synthesis of poly(ε-caprolactone) by an immobilized lipase coated with ionic liquids in a solvent-free condition

Polycaprolactone (PCL) was synthesized by ring-opening polymerization of ε-caprolactone through two different enzymatic processes. The lipase from Candida antarctica B, immobilized on macroporous acrylic acid beads, was employed either untreated or coated with small amounts of ionic liquids (ILs). Monocationic ionic liquids, [C _n MIm][NTf₂] (n = 2, 6, 12), as well as a dicationic ionic liquid, ([C₄(C₆Im)₂][NTf₂]₂), were used to coat the immobilized lipase and also as the reaction medium. In both methods, the polarity, anion of the ILs concentration and viscosity strongly influenced the reaction. Coating the immobilized enzyme with ILs improved catalytic activity and less ILs was required to produce PCL with a higher molecular weight and reaction yield. At 60 °C and ILs/Novozyme-435 coating ratio of 3:1 (w/w) for 48 h, the highest M _w and reaction yield of PCL were 35,600 g/mol and 62 % in the case of [C₁₂MIm][NTf₂], while the M _w and reaction yield of PCL was 20,300 g/mol and 54 % with [C₁₂MIm][NTf₂] and catalyzed by untreated lipase.     

Lipase-catalyzed synthesis of poly(ε-caprolactone) and characterization of its solid-state properties

Abstract

Ring-opening polymerization of ε-caprolactone has been successfully conducted using an immobilized form of Candida antarctica lipase B as catalyst. The effects of enzyme concentration, reaction medium, reaction temperature and time on monomer conversion and product molecular weight were investigated. Through optimization of reaction conditions, poly(ε-caprolactone) (PCL) was obtained with 99% monomer conversion and a number-average molecular weight (M_n) of 18870 g/mol. The reaction system was then scaled up, and PCL was synthesized in 78% isolated yield, with M_n and polydispersity index of 41540 g/mol and 1.69, respectively. The solid-state properties of this sample were systematically evaluated using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD) and polarized optical microscopy (POM). The product PCL showed excellent thermal stability, with degradation of the main chain in the temperature range of 280–450°C. Remarkably, this high molecular weight PCL was a typical crystalline polymer with a high degree of crystallinity observed by DSC, WAXD and POM.     

Synthesis and solution behavior of poly(ε-caprolactone) grafted hydroxyethyl cellulose copolymers

Trimethylsilylated hydroxyethyl cellulose (TMSHEC) was synthesized by using hexamethyldisilazane (HMDS) as silylated agent. With the partial protection of hydroxyl groups of HEC by silylation, the novel poly(?-polycaprolactone) (PCL) grafted HEC (HEC-g-PCL) copolymers were successfully prepared by homogenous ring-opening graft polymerization and deprotection procedure. The structure of HEC-g-PCL copolymers was characterized by FTIR and 1H NMR. Fluorescence spectrum of HEC-g-PCL copolymer dilute solution indicated that copolymers could associate and form hydrophobic microdomains in aqueous solution. With the increasing of grafted PCL content, the critical association concentration (cac) of HEC-g-PCL copolymers decreased. The surface tension of HEC-g-PCL copolymers decreased dramatically with the increasing of the concentration and then approached to a plateau value when concentration was above the cac of HEC-g-PCL copolymers. The hydrodynamic radius of the aggregate of copolymer in dilute solution was found to increase with the increasing of the grafted PCL content. When the concentration of copolymer was above the cac, the zero-shear viscosity of the copolymer increased sharply and became much higher than that of HEC at the same concentration.     

Investigation of polymer and nanoparticle properties with nicotinic acid and p-aminobenzoic acid grafted on poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) via click chemistry

In this study, the grafting of nicotinic acid and p-aminobenzoic acid (PABA) onto poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) was performed by Huisgen's 1,3-dipolar cycloaddition, also known as click chemistry. Concentrations used for grafting were 0.10, 0.20, and 0.30 molar ratios with respect to caproyl units. The grafted copolymers were successfully obtained at all ratios as confirmed by NMR, GPC, and FT-IR. According to the DSC results, the polymorphisms of these grafted copolymers were mostly changed from semicrystalline to amorphous depending on the type and the amount of grafting compounds. TGA thermograms showed different thermal stabilities of the grafted copolymers compared to the original copolymers. Cytotoxicity results from HUVEC models suggested that the toxicity of grafted nanoparticles increased with the molar ratios of grafting units. Due to differences in molecular structure between nicotinic acid and PABA, physicochemical properties (particle size and surface charge) of grafted copolymer nanoparticles were substantially different. With increasing molar ratio of the grafting units, the particle size of blank nanoparticles tended to increase, resulting from an increase in the hydrophobic fragments of the grafted copolymer. Ibuprofen was chosen as a model drug to evaluate the interaction between grafted copolymers and loaded drug. After ibuprofen loading, the particle size of the loaded nanoparticles of both grafted copolymers increased compared to that of the blank nanoparticles. Significant differences in loading capacity between nicotinic acid and PABA grafted copolymer nanoparticles were clearly shown. This is most likely a result of different compatibility between each grafting compound and ibuprofen, including hydrogen bond interaction, π-π stacking interaction, and steric hindrance.     

Biodegradable molecularly imprinted polymers based on poly(ε-caprolactone)

Novel biodegradable molecularly imprinted polymers (MIPs) based on poly(ε-caprolactone) (PCL) were prepared by combining two important properties required of ideal biomaterials, biodegradability (with biocompatibility) and molecular recognition properties. Acrylate or methacrylate end-capped PCL macromers were synthesized through the reaction of PCL diol or triol with acryloyl or methacryloyl chloride. The synthesis of acrylate or methacrylate end-capped macromers was confirmed using FT-IR and H NMR spectroscopic techniques. These macromers were used to prepare biodegradable crosslinked networks by photopolymerization with functional monomer (acrylic acid) and a model template (theophylline). The theophylline-imprinted polymer showed higher binding capacity for theophylline compared with non-imprinted polymer (NIP), and also showed selectivity for theophylline over caffeine (similar structure molecules). PCL-based MIP degraded 8% of the initial weight in 30 days in phosphate-buffered saline (PBS) solution (pH 7.4) and over 90% of the initial weight within 24 h in 1 N NaOH at 37°C.     

Synthesis of poly(lactide-co-glycolide-co-ε-caprolactone)-graft-mannosylated poly(ethylene oxide) copolymers by combination of "clip" and "click" chemistries

Poly(lactide-co-glycolide) (PLGA) is extensively used in pharmaceutical applications, for example, in targeted drug delivery, because of biocompatibility and degradation rate, which is easily tuned by the copolymer composition. Nevertheless, synthesis of sugar-labeled amphiphilic copolymers with a PLGA backbone is quite a challenge because of high sensitivity to hydrolytic degradation. This Article reports on the synthesis of a new amphiphilic copolymer of PLGA grafted by mannosylated poly(ethylene oxide) (PEO). A novel building block, that is, α-methoxy-ω-alkyne PEO-clip-N-hydroxysuccinimide (NHS) ester, was prepared on purpose by photoreaction of a diazirine containing molecular clip. This PEO block was mannosylated by reaction of the NHS ester groups with an aminated sugar, that is, 2-aminoethyl-α-d-mannopyroside. Then, the alkyne ω-end-group of PEO was involved in a copper alkyne- azide coupling (CuAAC) with the pendent azides of the aliphatic copolyester. The targeted mannose-labeled poly(lactide-co-glycolide-co-ε-caprolactone)-graft-poly(ethylene oxide) copolymer was accordingly formed. Copolymerization of d,l-lactide and glycolide with α-chloro-ε-caprolactone, followed by substitution of chlorides by azides provided the azido-functional PLGA backbone. Finally, micelles of the amphiphilic mannosylated graft copolymer were prepared in water, and their interaction with Concanavalin A (ConA), a glyco-receptor protein, was studied by quartz crystal microbalance. This study concluded to the prospect of using this novel bioconjugate in targeted drug delivery.     

Photo-cross-linked biodegradable poly(ester anhydride) networks prepared from alkenylsuccinic anhydride functionalized poly(ε-caprolactone) precursors

Biodegradable poly(ester anhydride) networks based on linear and star-shaped poly(ε-caprolactone)-based precursors were synthesized with the aim of obtaining matrixes suitable for release of macromolecular active agents. The ring-opening polymerization yielded hydroxyl telechelic oligomers, which were end-functionalized with succinic anhydride or with alkenylsuccinic anhydrides containing 8, 12, or 18 carbons in their alkenyl chains. Before cross-linking, the acid-terminated oligomers were reacted with methacrylic anhydride to obtain methacrylated precursors containing labile anhydride bonds. The degrees of substitution for the acid functionalization and methacrylation were >93%. Cross-linking of the precursors was carried out with visible light at room temperature. Gel contents and cross-linking densities were higher for networks cross-linked from the star-shaped precursors than for networks prepared from the linear precursors. In in vitro erosion tests, the presence of the alkenyl chain slowed down the erosion rate. The networks exhibited characteristic surface erosion: the mass loss was linear, whereas the dimensions of the specimens decreased steadily. A macromolecular release study showed the release of the model compound to be linear and in proportion to the mass loss.     

Functionalized hydrophobic poly(glycerol-co-ε-caprolactone) depots for controlled drug release

A limitation to many polymer-based drug delivery systems is the lack of ability to customize a particular polymer composition for tailoring drug release kinetics to a specific clinical application. In this study, we investigated the structure-property effects of conjugating various hydrophobic biocompatible side chains to poly(glycerol-co-caprolactone) copolymers with the goal of achieving prolonged and controlled release of a chemotherapeutic agent. The choice of side chain significantly affected the resulting polymer properties including thermal transitions, relative crystallinity (ΔH(f)), and hydrophobicity. Drug-loaded films cast from solutions of polymer and 10-hydroxycamptothecin demonstrated prolonged release from four to over seven weeks depending upon side chain structure without initial burst release behavior. Use of the stearic acid-conjugated poly(glycerol-co-caprolactone) films afforded substantial anticancer activity in vitro for at least 50 days when exposed to fresh cultures of A549 human lung cancer cells over 24 h intervals, correlating well with the measured drug release kinetics.     

Modeling stability and flexibility of α-Chymotrypsin in room temperature ionic liquids

We investigate the structure and dynamics of α-Chymotrypsin in five room temperature ionic liquids (RTILs) sharing a common cation, hydrated with different water percentages (w/w) (weight of water over protein). Results from molecular dynamics simulations are correlated with experimental evidences from studies on the activity of enzymes in RTILs. α-Chymotrypsin protein structure is closer to its native crystallographic structure in RTILs than in aqueous environment. We show that the structural properties of α-Chymotrypsin were affected by the water concentration assayed in a typical bell-shaped profile, which is also frequently reported for organic solvents. The protein structure was more native like at 10–20% of water (w/w) for all RTILs except for [BMIM][Cl]. We found that the fluctuations of the main chain in [BMIM][BF₄] and [BMIM][TfO] were not significantly affected by the increasing amount of water. However, we were able to show that the flexible regions were the ones more hydrated, indicating that water is responsible for the flexibility of the protein. The solvation of the enzyme in water-immiscible RTILs, such as [BMIM][PF₆] and [BMIM][Tf₂N] lead to higher enzyme flexibility at increased water content. Enzyme solvation by [BMIM][Cl] resulted in ion penetration in the core enzyme structure, causing incremented flexibility and destabilization at low water percentages. All RTILs stripped water molecules from the protein surface, following a similar behavior also found in organic solvents. Anions formed structured arrangements around the protein, which allowed non-stripped water molecules to localize on the protein surface.     

Hydrolysis of cellulose in SO₃H-functionalized ionic liquids

Influence of acidity and structure of ionic liquids on microcrystalline cellulose (MCC) hydrolysis was investigated. MnCl₂-containing ionic liquids (ILs) were efficient catalysts and achieved MCC conversion rates of 91.2% and selectivities for 5-hydroxymethyl furfural (HMF), furfural and levulinic acid (LA) of 45.7%, 26.2% and 10.5%, respectively. X-ray diffractometry indicated that catalytic hydrolysis of MCC in ionic liquids resulted in the changes to MCC crystallinity and transformation of cellulose I into cellulose II. SO₃H-functionalized ionic liquids showed higher activities than non-functionalized ILs. The simplicity of the chemical transformation of cellulose provides a new approach for the use this polymer as raw material for renewable energy and chemical industries.     

Fabrication of highly porous scaffolds for tissue engineering based on star-shaped functional poly(ε-caprolactone)

The potential of novel functional star‐shaped poly(ε‐caprolactone)s of controlled molecular weight and low molecular weight distribution bearing acrylate end groups as material for biomedical applications was demonstrated in this study. The polymers were functionalized via Michael‐type addition of amino acid esters containing amino or thiol groups showing the potential for immobilization of biomolecules. Furthermore, scaffolds of different geometries were prepared by uniaxial freezing of polymer solutions followed by freeze drying. Different solvents and polymer concentrations were investigated, resulting in scaffolds with porosities between 76 and 96%. Mechanical properties of the scaffolds were investigated and the morphology was determined via scanning electron microscopy. Scaffolds with interconnected channels were prepared using benzene, 1,2‐dichloroethane or dioxane as solvent. The tubular longitudinal pores in honeycomb arrangement extend throughout the full extent of the scaffolds (typical pore sizes: 20–100 µm). Biotechnol. Bioeng. 2011; 108:694–703. © 2010 Wiley Periodicals, Inc.     

Biodegradation of poly(ε-caprolactone) (PCL) by a new Penicillium oxalicum strain DSYD05-1

In this study, fungi isolated from soil were screened for their ability to form clear zones on agar plates with emulsified poly(ε-caprolactone) (PCL). The most active strain, designated as DSYD05, was identified as Penicillium oxalicum on the basis of morphological characteristics and phylogenetic analysis. Mutant DSYD05-1, obtained by ultraviolet-light mutagenesis from strain DSYD05, was more effective in PCL degradation. In liquid cultures of the mutant strain with PCL emulsion, DSYD05-1 showed the highest PCL-degrading activity after 4?days of cultivation. The products of PCL degradation were analysed by mass spectrometry; the results indicated that 6-hydroxyhexanoic acid was produced and assimilated during cultivation. The degradation of PCL film by DSYD05-1 was observed by scanning electron microscopy, and was indicative of a three-stage degradation process. The degradation of amorphous parts of the film preceded that of the crystalline center and then the peripheral crystalline regions. In addition, DSYD05-1 showed a wide range of substrate specificity, with capability to degrade PCL, poly(β-hydroxybutyrate), and poly(butylene succinate), but not poly(lactic acid), indicating that the strain could have potential for application in the treatment or recycling of bio-plastic wastes.     

Enzymatic synthesis of tyrosol and hydroxytyrosol β-d-fructofuranosides

Tyrosol β-d-fructofuranoside and hydroxytyrosol β-d-fructofuranoside have been synthesized as new compounds in 27.6 and 19.5% respective yields through transfructosylation of tyrosol and hydroxytyrosol. Yeast β-galactosidase Lactozym 3000?L comprising invertase activity was used as catalyst. Besides the main monofructosides, an equimolar mixture of tyrosol β-d-fructofuranosyl-((2→1)-β-d-fructofuranoside and tyrosol β-d-fructofuranosyl-(2→6)-β-d-fructofuranoside was isolated as additional product fraction in 14.3% yield.     

The regulatory effect of citric acid on the co-production of poly(ε-lysine) and poly(l-diaminopropionic acid) in Streptomyces albulus PD-1

Streptomyces albulus PD-1 can co-produce antimicrobial homo-polymers poly(ε-lysine) (ε-PL) and poly(l-diaminopropionic acid) (PDAP). In this study, a novel feeding strategy of citric acid coupled with glucose-(NH₄)₂SO₄ feeding was employed to S. albulus PD-1. When the pH of the culture broth dropped to 4.0, the feeding solution was added continuously to maintain the concentrations of glucose and citric acid at 10 and 4 g L^?1, respectively. As a result, the final concentration of ε-PL increased from 21.7 to 29.7 g L^?1 and the final concentration of PDAP decreased from 4.8 to 3.2 g L^?1. Assays on intracellular nucleotide levels and key enzyme activities were performed to elucidate the underlying regulation mechanism. The addition of citric acid increased NADH/NAD⁺ ratio and decreased intracellular ATP level; meanwhile, the activities of pyruvate kinase, citrate synthase and isocitrate dehydrogenase decreased while aspartate aminotransferase activity increased. Therefore, we deduced that citric acid feeding resulted in metabolic flux redistribution at the node of phosphoenolpyruvate; the metabolic pathway from phosphoenolpyruvate directed into tricarboxylic acid cycle was weakened and thus PDAP production was inhibited. On the other hand, the metabolic pathway from phosphoenolpyruvate directed into oxaloacetate and l-aspartate was enhanced, thereby improving ε-PL production. This fermentation strategy may be potentially useful in ε-PL production because it can effectively inhibit the formation of by-products, such as PDAP.     

Preparation and characterization of chitosan and trimethyl-chitosanmodified poly-(ε-caprolactone) nanoparticles as DNA carriers

The purpose of this research was to prepare poly-(ε-caprolactone) (PCL) particles by an emulsion-diffusion-evaporation method using a blend of poly-(vinyl alcohol) and chitosan derivatives as stabilizers. The chitosan derivatives used were chitosan hydrochloride and trimethyl chitosans (TMC) with varying degrees of quaternization. Particle characteristics-size, zeta potential, surface morphology, cytotoxicity, and transfection efficiency-were investigated. The developed method yields PCL nanoparticles in the size range of 250 to 300 nm with a positive surface charge (2.5 to 6.8 mV). The cytotoxicity was found to be moderate and virtually independent of the stabilizers' concentration with the exception of the highly quaternized TMC (degree of substitution 66%) being significantly more toxic. In immobilization experiments with gel electrophoresis, it could be shown that these cationic nanoparticles (NP) form stable complexes with DNA at a NP:DNA ratio of 3:1. These nanoplexes showed a significantly higher transfection efficiency on COS-1 cells than naked DNA. Published: August 10, 2005     

Thermally controlled release of anticancer drug from self-assembled γ-substituted amphiphilic poly(ε-caprolactone) micellar nanoparticles

A thermo-responsive poly{γ-2-[2-(2-methoxyethoxy)ethoxy]ethoxy-ε-caprolactone}-b-poly(γ-octyloxy-ε-caprolactone) (PMEEECL-b-POCTCL) diblock copolymer was synthesized by ring-opening polymerization using tin octanoate (Sn(Oct)(2)) catalyst and a fluorescent dansyl initiator. The PMEEECL-b-POCTCL had a lower critical solution temperature (LCST) of 38 °C, and it was employed to prepare thermally responsive micelles. Nile Red and Doxorubicin (DOX) were loaded into the micelles, and the micellar stability and drug carrying ability were investigated. The size and the morphology of the cargo-loaded micelles were determined by DLS, AFM, and TEM. The Nile-Red-loaded polymeric micelles were found to be stable in the presence of both fetal bovine serum and bovine serum albumin over a 72 h period and displayed thermo-responsive in vitro drug release. The blank micelles showed a low cytotoxicity. As comparison, the micelles loaded with DOX showed a much higher in vitro cytotoxicity against MCF-7 human breast cancer cell line when the incubation temperature was elevated above the LCST. Confocal laser scanning microscopy was used to study the cellular uptake and showed that the DOX-loaded micelles were internalized into the cells via an endocytosis pathway.     

Enzymatic synthesis of nuatigenin 3β-D-glucoside in oat (Avena sativa) leaves

Crude homogenates or acetone powder preparations from oat leaves efficiently catalyse the glucosylation of a steroidal sapogenin, nuatigenin [22,25-epoxy-(20S)(22S)(25S)-furost-5-en-3β,26-diol], using UDP-glucose as the sugar donor. The reaction product was identified as nuatigenin 3β-D-monoglucoside. In contrast to the glucosylation of phytosterols, which is also catalysed by enzyme preparations from oat leaves, the formation of nuatigenin glucoside is not stimulated by Triton X-100. This result suggests that glucosyltransferases with different specifirity patterns are involved in sterol and nuatigenin glucosylation in oat leaves. Enzymatic acylation of nuatigenin glucoside to its monoacyl derivative with the use of an endogenous acyl source was also observed with a crude homogenate or a crude membranous fraction as the enzyme preparation.     

Preparation of poly(ε-lysine) adsorbents and application to selective removal of lipopolysaccharides

To remove endotoxins (lipopolysaccharides; LPS) from cell products used as drugs, water-insoluble poly(ε-lysine) (PL) particles were prepared by cross-linking with PL originating from Streptomyces albulus and chloromethyloxirane (CMO). The apparent pK_a (pK_a,app) and the anion-exchange capacity of the particles were easily adjusted by changing the PL ratio and the CMO ratio. The higher the pK_a,app, the greater the LPS-adsorption capacity of the particles. On the other hand, when the PL ratio (in the particles) increased to 75 unit-mol% or higher, the adsorption of bovine serum albumin by the particles also increased, but decreased with increasing ionic strength of the buffer to μ=0.2 or higher. The adsorption of γ-globulin increased with decreasing PL ratio to 65 unit-mol% or lower. As a result, when the PL ratio was 70 unit-mol% and the pK_a,app was 6.7, the PL/CMO particles selectively removed LPS from various protein solutions that were naturally contaminated with LPS, at pH 6.0 and μ=0.05.     

Electrospun chitosan-graft-poly (ε -caprolactone)/poly (ε-caprolactone) cationic nanofibrous mats as potential scaffolds for skin tissue engineering

This research is aimed to develop cationic nanofibrous mats with improved cellular adhesion profiles and stability of three-dimensional fibrous structure as potential scaffolds for skin tissue engineering. Firstly, amino-remained chitosan-graft-poly (?-caprolactone) (CS-g-PCL) was synthesized with a facile one-step manner by grafting ?-caprolactone oligomers onto the hydroxyl groups of CS via ring-opening polymerization by using methanesulfonic acid as solvent and catalyst. And then, CS-g-PCL/PCL nanofibrous mats were obtained by electrospinning of CS-g-PCL/PCL mixed solution. Scanning electron microscopy (SEM) images showed that the morphologies and diameters of the nanofibers were mainly affected by the weight ratio of CS-g-PCL to PCL. The enrichment of amino groups on the nanofiber surface was confirmed by X-ray photoelectron spectroscopy (XPS). With the increase of CS-g-PCL in CS-g-PCL/PCL nanofiber, the content of amino groups on the nanofiber surface increased, which resulted in the increase of zeta-potential of nanofibers. Studies on cell-scaffold interaction were carried out by culturing mouse fibroblast cells (L929) on CS-g-PCL/PCL nanofibrous mats with various contents of CS-g-PCL by assessing the growth, proliferation and morphologies of cells. The results of MTS assay and SEM observation showed that CS-g-PCL/PCL (2/8) mats with a moderate surface zeta-potential (ζ=3mV) were the best in promoting the cell attachment and proliferation. Toluidine blue staining further confirmed that L929 cells grew well and exhibited a normal morphology on the CS-g-PCL/PCL (2/8) mats. These results suggested the potential utilization of CS-g-PCL/PCL (2/8) nanofibrous mats for skin tissue engineering.     

Detection of poly(ADP-ribose) synthesis in Drosophila testes upon γ-irradiation

Poly(ADP-ribose) polymerase (PARP) activity is widespread among eukaryotes. Upon DNA damage PARP binds to DNA strand breaks and transfers ADP-ribose residues from NAD⁺ to acceptor proteins and to ADP-ribosyl protein adducts. This leads to branched polymers of protein-coupled poly(ADP-ribose) (pADPr). Because the germline of Drosophila has recently become important in the study of DNA double-strand break repair (DSBR) as opposed to somatic DSBR we tested whether the catalytic activity of PARP can be stimulated by γ-irradiation during Drosophila spermatogenesis. Using antibodies against pADPr we detected a significant increase in PARP activity in male germline cells during spermatogenesis upon γ-irradiation. Different stages of spermatogenesis revealed different subnuclear localization patterns of pADPr. In premeiotic and postmeiotic cells pADPr localized in a pattern overlapping with lamin and topoisomerase II at the nuclear rim. In primary spermatocytes pADPr is associated with three loci corresponding to the chromosomes at the nuclear periphery. Received: 12 October 1998; in revised form: 21 December 1998 / Accepted: 23 December 1998