Criteria for the evaluation of life cycle assessment software packages and life cycle inventory data with application to concrete

Purpose

Life cycle assessment (LCA) software packages have proliferated and evolved as LCA has developed and grown. There are now a multitude of LCA software packages that must be critically evaluated by users. Prior to conducting a comparative LCA study on different concrete materials, it is necessary to examine a variety of software packages for this specific purpose. The paper evaluates five LCA tools in the context of the LCA of seven concrete mix designs (conventional concrete, concrete with fly ash, slag, silica fume or limestone as cement replacement, recycled aggregate concrete, and photocatalytic concrete).

Methods

Three key evaluation criteria required to assess the quality of analysis are adequate flexibility, sophistication and complexity of analysis, and usefulness of outputs. The quality of life cycle inventory (LCI) data included in each software package is also assessed for its reliability, completeness, and correlation to the scope of LCA of concrete products in Canada. A questionnaire is developed for evaluating LCA software packages and is applied to five LCA tools.

Results and discussion

The result is the selection of a software package for the specific context of LCA of concrete materials in Canada, which will be used to complete a full LCA study. The software package with the highest score is software package C (SP-C), with 44 out of a possible 48 points. Its main advantage is that it allows for the user to have a high level of control over the system being modeled and the calculation methods used.

Conclusions

This comparative study highlights the importance of selecting a software package that is appropriate for a specific research project. The ability to accurately model the chosen functional unit and system boundary is an important selection criterion. This study demonstrates a method to enable a critical and rigorous comparison without excessive and redundant duplication of efforts.

     

When can host shifts produce congruent host and parasite phylogenies? A simulation approach

Congruence between host and parasite phylogenies is often taken as evidence for cospeciation. However, 'pseudocospeciation', resulting from host-switches followed by parasite speciation, may also generate congruent trees. To investigate this process and the conditions favouring its appearance, we here simulated the adaptive radiation of a parasite onto a new range of hosts. A very high congruence between the host tree and the resulting parasite trees was obtained when parasites switched between closely related hosts. Setting a shorter time lag for speciation after switches between distantly related hosts further increased the degree of congruence. The shape of the host tree, however, had a strong impact, as no congruence could be obtained when starting with highly unbalanced host trees. The strong congruences obtained were erroneously interpreted as the result of cospeciations by commonly used phylogenetic software packages despite the fact that all speciations resulted from host-switches in our model. These results highlight the importance of estimating the age of nodes in host and parasite phylogenies when testing for cospeciation and also demonstrate that the results obtained with software packages simulating evolutionary events must be interpreted with caution.     

Tools for kinetic modeling of biochemical networks

The number of software packages for kinetic modeling of biochemical networks continues to grow. Although most packages share a common core of functionality, the specific capabilities and user interfaces of different packages mean that choosing the best package for a given task is not trivial. We compare 12 software packages with respect to their functionality, reliability, efficiency, user-friendliness and compatibility. Although most programs performed reliably in all numerical tasks tested, SBML compatibility and the set-up of multicompartmentalization are problematic in many packages. For simple models, GEPASI seems the best choice for non-expert users. For large-scale models, environments such as Jarnac/JDesigner are preferable, because they allow modular implementation of models. Virtual Cell is the most versatile program and provides the simplest and clearest functionality for setting up multicompartmentalization.     

Adaptive trial designs: a review of barriers and opportunities

ABSTRACT: Adaptive designs allow planned modifications based on data accumulating within a study. The promise of greater flexibility and efficiency stimulates increasing interest in adaptive designs from clinical, academic, and regulatory parties. When adaptive designs are used properly, efficiencies can include a smaller sample size, a more efficient treatment development process, and an increased chance of correctly answering the clinical question of interest. However, improper adaptations can lead to biased studies. A broad definition of adaptive designs allows for countless variations, which creates confusion as to the statistical validity and practical feasibility of many designs. Determining properties of a particular adaptive design requires careful consideration of the scientific context and statistical assumptions. We first review several adaptive designs that garner the most current interest. We focus on the design principles and research issues that lead to particular designs being appealing or unappealing in particular applications. We separately discuss exploratory and confirmatory stage designs in order to account for the differences in regulatory concerns. We include adaptive seamless designs, which combine stages in a unified approach. We also highlight a number of applied areas, such as comparative effectiveness research, that would benefit from the use of adaptive designs. Finally, we describe a number of current barriers and provide initial suggestions for overcoming them in order to promote wider use of appropriate adaptive designs. Given the breadth of the coverage all mathematical and most implementation details are omitted for the sake of brevity. However, the interested reader will find that we provide current references to focused reviews and original theoretical sources which lead to details of the current state of the art in theory and practice.     

Comparison of two academic software packages for analyzing two-dimensional gel images

One of the key limitations for proteomic studies using two-dimensional (2D) gel is the lack of automatic, fast, robust, and reliable methods for detecting, matching, and quantifying protein spots. Although there are commercial software packages for 2D gel image analysis, extensive human intervention is still needed for spot detection and matching, which is time-consuming and error-prone. Moreover, the commercial software packages are usually expensive and non-open source. Thus, it is very beneficial for researchers to have free software that is fast, fully automatic, and robust. In this paper, we review and compare two recently developed and publicly available software packages, RegStatGel and Pinnacle, for analyzing 2D gel images. These two software packages share some common features and also have some fundamental difference in the aspects of spot detection and quantification. Based on our experience, RegStatGel is much better in terms of spot detection and matching. It also contains more advanced statistical tools and is more user-friendly. In contrast, Pinnacle is quite sensitive to background noise and relies on external statistical software packages for statistical analysis.     

Estimating multilevel logistic regression models when the number of clusters is low: a comparison of different statistical software procedures

Multilevel logistic regression models are increasingly being used to analyze clustered data in medical, public health, epidemiological, and educational research. Procedures for estimating the parameters of such models are available in many statistical software packages. There is currently little evidence on the minimum number of clusters necessary to reliably fit multilevel regression models. We conducted a Monte Carlo study to compare the performance of different statistical software procedures for estimating multilevel logistic regression models when the number of clusters was low. We examined procedures available in BUGS, HLM, R, SAS, and Stata. We found that there were qualitative differences in the performance of different software procedures for estimating multilevel logistic models when the number of clusters was low. Among the likelihood-based procedures, estimation methods based on adaptive Gauss-Hermite approximations to the likelihood (glmer in R and xtlogit in Stata) or adaptive Gaussian quadrature (Proc NLMIXED in SAS) tended to have superior performance for estimating variance components when the number of clusters was small, compared to software procedures based on penalized quasi-likelihood. However, only Bayesian estimation with BUGS allowed for accurate estimation of variance components when there were fewer than 10 clusters. For all statistical software procedures, estimation of variance components tended to be poor when there were only five subjects per cluster, regardless of the number of clusters.     

Adaptive web sampling

A flexible class of adaptive sampling designs is introduced for sampling in network and spatial settings. In the designs, selections are made sequentially with a mixture distribution based on an active set that changes as the sampling progresses, using network or spatial relationships as well as sample values. The new designs have certain advantages compared with previously existing adaptive and link-tracing designs, including control over sample sizes and of the proportion of effort allocated to adaptive selections. Efficient inference involves averaging over sample paths consistent with the minimal sufficient statistic. A Markov chain resampling method makes the inference computationally feasible. The designs are evaluated in network and spatial settings using two empirical populations: a hidden human population at high risk for HIV/AIDS and an unevenly distributed bird population.     

Interactive ant colony optimization (iACO) for early lifecycle software design

Finding good designs in the early stages of the software development lifecycle is a demanding multi-objective problem that is crucial to success. Previously, both interactive and non-interactive techniques based on evolutionary algorithms (EAs) have been successfully applied to assist the designer. However, recently ant colony optimization was shown to outperform EAs at optimising quantitative measures of software designs with a limited computational budget. In this paper, we propose a novel interactive ACO (iACO) approach, in which the search is steered jointly by an adaptive model that combines subjective and objective measures. Results show that iACO is speedy, responsive and effective in enabling interactive, dynamic multi-objective search. Indeed, study participants rate the iACO search experience as compelling. Moreover, inspection of the learned model facilitates understanding of factors affecting users’ judgements, such as the interplay between a design’s elegance and the interdependencies between its components.     

A practical guide to methods of parentage analysis

The use of molecular techniques for parentage analysis has been a booming science for over a decade. The most important technological breakthrough was the introduction of microsatellite markers to molecular ecology, an advance that was accompanied by a proliferation and refinement of statistical techniques for the analysis of parentage data. Over the last several years, we have seen steady progress in a number of areas related to parentage analysis, and the prospects for successful studies continue to improve. Here, we provide an updated guide for scientists interested in embarking on parentage analysis in natural or artificial populations of organisms, with a particular focus on computer software packages that implement various methods of analysis. Our survey of the literature shows that there are a few established methods that perform extremely well in the analysis of most types of parentage studies. However, particular experimental designs or study systems can benefit from some of the less well-known computer packages available. Overall, we find that parentage analysis is feasible and satisfying in most systems, and we try to provide a simple roadmap to help other scientists navigate the confusing topography of statistical techniques.     

Ryanodine receptors, a family of intracellular calcium ion channels, are expressed throughout early vertebrate development

Background

We developed a new version of the open source software package Peptrix that can yet compare large numbers of Orbitrap? LC-MS data. The peptide profiling results for Peptrix on MS1 spectra were compared with those obtained from a small selection of open source and commercial software packages: msInspect, Sieve? and Progenesis?. The properties compared in these packages were speed, total number of detected masses, redundancy of masses, reproducibility in numbers and CV of intensity, overlap of masses, and differences in peptide peak intensities. Reproducibility measurements were taken for the different MS1 software applications by measuring in triplicate a complex peptide mixture of immunoglobulin on the Orbitrap? mass spectrometer. Values of peptide masses detected from the high intensity peaks of the MS1 spectra by peptide profiling were verified with values of the MS2 fragmented and sequenced masses that resulted in protein identifications with a significant score.

Findings

Peptrix finds about the same number of peptide features as the other packages, but peptide masses are in some cases approximately 5 to 10 times less redundant present in the peptide profile matrix. The Peptrix profile matrix displays the largest overlap when comparing the number of masses in a pair between two software applications. The overlap of peptide masses between software packages of low intensity peaks in the spectra is remarkably low with about 50% of the detected masses in the individual packages. Peptrix does not differ from the other packages in detecting 96% of the masses that relate to highly abundant sequenced proteins. MS1 peak intensities vary between the applications in a non linear way as they are not processed using the same method.

Conclusions

Peptrix is capable of peptide profiling using Orbitrap? files and finding differential expressed peptides in body fluid and tissue samples. The number of peptide masses detected in Orbitrap? files can be increased by using more MS1 peptide profiling applications, including Peptrix, since it appears from the comparison of Peptrix with the other applications that all software packages have likely a high false negative rate of low intensity peptide peaks (missing peptides).     

STING Millennium Suite: integrated software for extensive analyses of 3d structures of proteins and their complexes

Background  

The integration of many aspects of protein/DNA structure analysis is an important requirement for software products in general area of structural bioinformatics. In fact, there are too few software packages on the internet which can be described as successful in this respect. We might say that what is still missing is publicly available, web based software for interactive analysis of the sequence/structure/function of proteins and their complexes with DNA and ligands. Some of existing software packages do have certain level of integration and do offer analysis of several structure related parameters, however not to the extent generally demanded by a user.     

四种常用高通量测序拼接软件的应用比较

新一代测序平台的诞生推动了对全基因组鸟枪法测序数据的拼接算法和软件的研究,自2005年以来多种用于高通量测序的序列拼接软件已经被开发出来,并且在不断地进行改进以提高拼接效果.本文利用目前广泛使用的高通量测序拼接软件Velvet、AbySS、SOAPdenovo和CLC Genomic Workbench分别对本试验室分离的一株噬菌体IME08的高通量测序结果进行拼接,介绍这几种拼接软件的安装使用及参数优化,并对不同软件的拼接结果进行比较,针对不同的拼接软件得到优化的拼接参数,可为其他研究人员使用上述软件提供参考借鉴.     

Order‐restricted Scores Test for the Evaluation of Population‐based Case–control Studies when the Genetic Model is Unknown

The Cochran–Armitage (CA) linear trend test for proportions is often used for genotype‐based analysis of candidate gene association. Depending on the underlying genetic mode of inheritance, the use of model‐specific scores maximises the power. Commonly, the underlying genetic model, i.e. additive, dominant or recessive mode of inheritance, is a priori unknown. Association studies are commonly analysed using permutation tests, where both inference and identification of the underlying mode of inheritance are important. Especially interesting are tests for case–control studies, defined by a maximum over a series of standardised CA tests, because such a procedure has power under all three genetic models. We reformulate the test problem and propose a conditional maximum test of scores‐specific linear‐by‐linear association tests. For maximum‐type, sum and quadratic test statistics the asymptotic expectation and covariance can be derived in a closed form and the limiting distribution is known. Both the limiting distribution and approximations of the exact conditional distribution can easily be computed using standard software packages. In addition to these technical advances, we extend the area of application to stratified designs, studies involving more than two groups and the simultaneous analysis of multiple loci by means of multiplicity‐adjusted p‐values for the underlying multiple CA trend tests. The new test is applied to reanalyse a study investigating genetic components of different subtypes of psoriasis. A new and flexible inference tool for association studies is available both theoretically as well as practically since already available software packages can be easily used to implement the suggested test procedures.     

Common conventions for interchange and archiving of three-dimensional electron microscopy information in structural biology

Three-dimensional electron microscopy (3DEM) has made significant contributions to structural biology. To accomplish this feat, many image-processing software packages were developed by various laboratories. The independent development of methods naturally implied the adoption of dissimilar conventions-penalizing users who want to take advantage of the wealth of algorithms from different packages. In addition, a public repository of 3DEM research results, the EM Data Bank, is now established. In an era where information exchange is important, standardizing conventions is a necessity. The 3DEM field requires a consistent set of conventions. We propose a set of common conventions named the "3DEM Image Conventions." They are designed as a standardized approach to image interpretation and presentation. In this regard, the conventions serve as a first step on which to build data-exchange solutions among existing software packages and as a vehicle for homogenous data representation in data archives, such as the EM Data Bank.     

Bsoft: image and molecular processing in electron microscopy

Software for the processing of electron micrographs in structural biology suffers from incompatibility between different packages, poor definition and choice of conventions, and a lack of coherence in software development. The solution lies in adopting a common philosophy of interaction and conventions between the packages. To understand the choices required to have such common interfaces, I am developing a package called "Bsoft." Its foundations lie in the variety of different image file formats used in electron microscopy-a continually frustrating experience to the user and programmer alike. In Bsoft, this problem is greatly diminished by support for many different formats (including MRC, SPIDER, IMAGIC, SUPRIM, and PIF) and by separating algorithmic issues from image format-specific issues. In addition, I implemented a generalized functionality for reading the tag-base STAR (self-defining text archiving and retrieval) parameter file format as a mechanism to exchanging parameters between different packages. Bsoft is written in highly portable code (tested on several Unix systems and under VMS) and offers a continually growing range of image processing functionality, such as Fourier transformation, cross-correlation, and interpolation. Finally, prerequisites for software collaboration are explored, which include agreements on information exchange and conventions, and tests to evaluate compatibility between packages.     

Comparison of image analysis software packages in the assessment of adhesion of microorganisms to mucosal epithelium using confocal laser scanning microscopy

We have compared current image analysis software packages in order to find the most useful one for assessing microbial adhesion and inhibition of adhesion to tissue sections. We have used organisms of different sizes, the bacterium Helicobacter pylori and the yeast Candida albicans. Adhesion of FITC-labelled H. pylori and C. albicans was assessed by confocal microscopy. Four different Image analysis software packages, NIH-Image, IP Lab, Image Pro+, and Metamorph, were compared for their ability to quantify adhesion of the two organisms and several quantification methods were devised for each package. For both organisms, the dynamic range that could be detected by the software packages was 1x10(6)-1x10(9) cells/ml. Of the four software packages tested, our results showed that Metamorph software, using our 'Region of Interest' method, with the software's 'Standard Area Method' of counting, was the most suitable for quantifying adhesion of both organisms because of its unique ability to separate clumps of microbial cells. Moreover, fewer steps were required. By pre-incubating H. pylori with the glycoconjugate Lewis b-HSA, an inhibition of binding of 48.8% was achieved using 250 mug/ml Lewis b-HSA. The method we have devised using Metamorph software, provides a simple, quick and accurate way of quantifying adhesion and inhibition of adhesion of microbial cells to the epithelial surface of tissue sections. The method can be applied to organisms ranging in size from small bacteria to larger yeast cells.     

Flow: Statistics, visualization and informatics for flow cytometry

Flow is an open source software application for clinical and experimental researchers to perform exploratory data analysis, clustering and annotation of flow cytometric data. Flow is an extensible system that offers the ease of use commonly found in commercial flow cytometry software packages and the statistical power of academic packages like the R BioConductor project.     

Conditional Point Estimation in Adaptive Group Sequential Test Designs

It is well known that point estimates in group sequential designs are biased. This also applies to adaptive designs that enable, e.g., data driven reassessments of group sample sizes. For triangular designs, Whitehead (1986) (Biometrika 73 , 573–581) proposed a bias adjusted estimate. But this estimate is not feasible in adaptive designs although it is in group sequential designs. Furthermore, there is a waste of information because it does not use the information at which stage the trial was stopped. We present a modification which does use this information and which is applicable to adaptive designs. The modified estimate achieves an improvement in group sequential designs and shows similar results in adaptive designs.     

Mathematica packages for simulation of experimental genetics

This note describes add-on packages for the Mathematica software system (Wolfram 1996) which allow simulation and analysis of both Mendelian and complex genetic traits in experimental crosses of plants or animals. AVAILABILITY: The add-on packages are freely available at http://www.mathsource.com/cgi-bin/msitem?0209-30 4. SUPPLEMENTARY INFORMATION: A tutorial notebook file is included with the packages at the mathsource site.