Determination of phosphate Ions with an enzyme sensor system

An enzyme sensor system for the determination of phosphate ions was constructed using immobilized enzymes and an oxygen electrode. The principle of this method is based upon the nucleoside phosphorylase catalyzed reaction for which the presence of inorganic phosphorus is indispensable. One assay could be completed within 3 min. This enzyme sensor was able to withstand at least 70 assays. This system was applicable to simple, rapid and continuous determination of phosphate ions in food.     

Automated assay of creatinine in serum as simplified by the use of immobilized enzymes, creatinine deiminase, and glutamate dehydrogenase

A method for the automated analysis of creatinine in serum using immobilized enzymes in column form which does not require a blank correction and can be run in a single buffer of pH 7.5 is described. The method was based on the determination of ammonia formed by the action of creatinine deiminase. Endogenous ammonia in serum was removed by an immobilized glutamate dehydrogenase column prior to the action of creatinine deiminase also immobilized and used in column form. The present method was found to give perfect linearity of the data up to 0.10 g creatinine/liter with satisfactory precision, reproducibility, and accurate reaction recoveries. The immobilized enzyme reactor unit showed good operational stability for a 2-month period, during which time it was repeatedly used for analyses over 2000 times. The results correlated satisfactorily with those obtained by other well-established methods.     

Immobilized enzyme system for determination of sialic acid in serum or urine.

An immobilized enzyme system has been developed and employed to determine the concentration of sialic acid (N-acetylneuraminic acid) in human serum and urine. Two enzyme pairs, neuramindiase-Neu-5-Ac lyase and pyruvate oxidase-peroxidase, have been respectively co-immobilized onto 1,12-aminododecane-agarose with glutaraldehyde. The relative specific activity of the co-immobilized neuraminidase and Neu-5-Ac lyase were 60% and 78%, and those of pyruvate oxidase and peroxidase were 50% and 95% of the corresponding soluble enzymes, respectively. The optimal reaction pH at 37 degrees C for each of the co-immobilized enzymes was about one pH unit higher than that of the corresponding soluble enzyme. The optimal reaction temperature of each enzyme was increased as a result of immobilization. The thermal stability at 45 degrees C of the immobilized neuraminidase, Neu-5-Ac lyase, pyruvate oxidase, and peroxidase were increased 80-, 83-, 115-, and 147-fold, respectively. Km and Vm of each immobilized and co-immobilized enzyme have also been determined. The system provided a convenient and rapid method to determine the concentration of total sialic acid without pretreatment of the sample. The results correlated satisfactorily with those obtained by using a soluble enzyme system. The co-immobilized enzymes were stable for at least 1 year of 500 tests when used repeatedly. The system is thus a reproducible and reliable novel assay method for sialic acid in the serum or urine sample.     

Determination of inorganic phosphate by flow injection method with immobilized enzymes and chemiluminescence detection

A flow injection method with chemiluminescence detection has been developed for the enzymatic determination of inorganic phosphate. Purine nucleoside phosphorylase, xanthine oxidase, and urate oxidase were immobilized on controlled-pore glass beads. Hydrogen peroxide released by the enzymatic reactions of phosphate and inosine in carrier buffer was detected by the luminol-microperoxidase system in a flow cell. The calibration graph was linear over the range of 5 to 250 pmol, and reproducibility was 1.75% at 10 pmol. The detection limit was 500 fmol of phosphate in 50 microliters of sample injected. The phosphate content in deoxyribonucleic acid was measured by this method.     

Enzyme electrode composed of the pyruvate oxidase from pediococcus species coupled to an oxygen electrode for measurements of pyruvate in biological media

Pyruvate oxidase from Pediococcus species was immobilized with gelatin and insolubilized in film form by tanning with glutaraldehyde. The film was fixed onto the tip of an oxygen electrode. The enzyme electrode was specific for pyruvate measurements. This electrode was sensitive to 0.1 mM and could be used up to a final pyruvate concentration of 2 mM.At each step of the enzymatic film preparation and assay 0.7 mM thiamine pyrophosphate, 10 μM flavin adenine dinucleotide, 5mM Mg²⁺ and 10 mM phosphate buffer were necessary.A computerized probe allowed successive measurements every 3 min for more than 20 h with the same enzymatic film. The reproducibillty for the same pyruvate concentration was 2% during 400 assays without special optimization.This enzyme electrode has many applications in basic (metabolism, enzymology) and applied (blood, yoghurt) research. Results obtained from assays carried out in yoghurt are presented.     

Biosensor system for continuous flow determination of enzyme activities. II. Simultaneous determination of plural enzyme activities.

A biosensor system for continuous flow determination of plural enzyme activities was prepared from the combination of two pyruvate sensors, a prereactor and a flow cell. This system was applied to the simultaneous determination of lactic dehydrogenase (LDH) and glutamic-pyruvic transaminase (GPT) activities in the same sample. These enzyme activities can be determined by measuring pyruvate produced by the enzyme reactions as follows. The amount of pyruvic acid can also be determined from the amount of oxygen consumed upon oxidation of pyruvic acid by pyruvate oxidase. (Formula: see text). Therefore, both of the detectors for the determination of lactic dehydrogenase and glutamic-pyruvic transaminase activities were prepared from the combination of a pyruvate oxidase membrane and an oxygen electrode. Pyruvate oxidase was covalently immobilized on a membrane prepared from cellulose triacetate. A linear relation was obtained between the output current and LDH or GPT activities in the range of 50 to 3,600 IU l-1 or 6 to 1,000 IU l-1, respectively. Each assay of these enzyme activities was completed within 15 min. The results obtained had a precision of ca. 4%. The sensor was stable for more than 25 days at 5 degrees C.     

Fiber entrapment of naringinase from Penicillium sp. and application to fruit juice debittering

Naringinase from Penicillium sp. was immobilized on cellulose triacetate by the fiber entrapment method. Although the optimum pH (3.7) and optimum temperature (55°C) of the fiber-entrapped enzyme were similar to those of the native form, the immobilized enzyme had better heat stability. Kinetic studies showed that the immobilized enzyme had higher K_m values than its native form. When this immobilized naringinase was successively used in a column reactor for the hydrolysis of ρ-nitrophenyl-α-l-rhamnoside or naringin in a simulated fruit juice system or grapefruit juice, the enzyme column could be operated with satisfactory stability. In addition, when the natural grapefruit juice was recycled through the column reactor, no column blocking or filtering action of the catalyst bed was observed.     

Biosensor system for continuous flow determination of enzyme activities. I. Determination of glucose oxidase and lactic dehydrogenase activities

A biosensor system for continuous flow determination of enzyme activity was developed and applied to the determination of glucose oxidase and lactic dehydrogenase activities. The glucose oxidase activity sensor was prepared from the combination of an oxygen electrode and a flow cell. Similarly, the lactic dehydrogenase activity sensor was prepared from the combination of a pyruvate oxidase membrane, an oxygen electrode, and a flow cell. Pyruvate oxidase was covalently immobilized on a membrane prepared from cellulose triacetate, 1,8-diamino-4-aminomethyloctane, and glutaraldehyde. Glucose oxidase activity was determined from the oxygen consumed upon oxidation of glucose catalyzed by glucose oxidase. Lactic dehydrogenase activity was determined from the pyruvic acid formed upon dehydrogenation of lactic acid catalyzed by lactic dehydrogenase. The amount of pyruvic acid was determined from the oxygen consumed upon oxidation of pyruvic acid by pyruvate oxidase. Calibration curves for activity of glucose oxidase and lactic dehydrogenase were linear up to 81 and 300 units, respectively. One assay could be completed within 15 min for both sensors and these were stable for more than 25 days at 5°C. The relative errors were ±4 and ±6% for glucose oxidase and lactic dehydrogenase sensors, respectively. These results suggest that the sensor system proposed is a simple, rapid, and economical method for the determination of enzyme activities.     

Immobilization of d-glucose oxidase onto a hydrogen peroxide permselective membrane and application for an enzyme electrode

A hydrogen peroxide permselective membrane with asymmetric structure was prepared and d-glucose oxidase (EC 1.1.3.4) was immobilized onto the porous layer. The activity of the immobilized d-glucose oxidase membrane was 0.34 units cm^?2 and the activity yield was 6.8% of that of the native enzyme. Optimum pH, optimum temperature, pH stability and temperature stability were found to be pH 5.0, 30–40°C, pH 4.0–7.0 and below 55°C, respectively. The apparent Michaelis constant of the immobilized d-glucose oxidase membrane was 1.6 × 10^?3 mol l^?1 and that of free enzyme was 4.8 × 10^?2 mol l^?1. An enzyme electrode was constructed by combination of a hydrogen peroxide electrode with the immobilized d-glucose oxidase membrane. The enzyme electrode responded linearly to d-glucose over the concentration 0–1000 mg dl^?1 within 10 s. When the enzyme electrode was applied to the determination of d-glucose in human serum, within day precision (CV) was 1.29% for d-glucose concentration with a mean value of 106.8 mg dl^?1. The correlation coefficient between the enzyme electrode method and the conventional colorimetric method using a free enzyme was 0.984. The immobilized d-glucose oxidase membrane was sufficiently stable to perform 1000 assays (2 to 4 weeks operation) for the determination of d-glucose in human whole blood. The dried membrane retained 77% of its initial activity after storage at 4°C for 16 months.     

An immobilized enzyme reactor for the detoxification of bilirubin

An immobilized enzyme reactor has been developed for the degradation of bilirubin as a potential treatment for neonatal jaundice. It utilizes the enzyme bilirubin oxidase from Myrothecium verrucaria, which in the presence of molecular oxygen converts bilirubin to biliverdin and other products that are much less toxic than bilirubin. Bilirubin oxidase was covalently attached to agarose beads using cyano transfer activation. Forty percent of the specific activity of bilirubin oxidase was retained after immmobilization, and preparations with 20 units of enzymatic activity per gram of drained wet weight of gel were obtained. The stability of bilirubin oxidase at pH 7.4 and 37 degrees C was improved fivefold by immobilization. A 15-mL column containing immobilized bilirubin oxidase, through which a 37 degrees C solution of 332muM bilirubin and 450muM human serum albumin in 0.05M phosphate buffer (pH 7.4) was passed at 1 mL/min, converted more than 60 percent of the bilirubin per pass. The substrate specificity of the enzyme and the small volume of the reactor are important characteristics for this clinical application where it is desirable to remove only one compound from the blood and to minimize the volume of blood in the extracorporeal circuit. This reactor, by detoxifying the jaundiced infant's blood of bilirubin, would eliminate the risks associated with the use of donor blood as is done currently in treating severe neonatal jaundice.     

Immobilization of glucose oxidase in thin polypyrrole films: influence of polymerization conditions and film thickness on the activity and stability of the immobilized enzyme

Using monomers that polymerize to form electrically conducting polymers, one can control the thickness of the polymer film and the amount of enzyme that can be immobilized in the films. First, an investigation of the major variables that influence the immobilization of glucose oxidase by entrapment in polypyrrole films, prepared by electropolymerization from aqueous solutions containing the enzyme and monomer, was carried out. Then the optimized conditions were used to assess the effects of film thickness on the activity and stability of immobilized enzyme. For the films ranged in thickness from 0.1 mum to 1.6 mum, the resulting apparent activity and stability of the immobilized enzyme were found to be a strong function of the polymer film thickness. Above a thickness of 1.0 mum, the apparent activity of the immobilized enzyme increases linearly with increasing film thickness. The nonlinearity observed for films of thickness less than 1.0 mum can be attributed to the changes observed in the morphology of the resulting polypyrrole films. Furthermore, it was noted that when the glucose oxidase/polypyrrole films are stored in phosphate buffer, at 4 degrees C, the observed rate of loss in apparent activity of the immobilized enzyme is highest for the first few days, also being higher for the thinner films. However, after the loosely entrapped enzyme is leached from the polymer film, the rate of loss in activity is very low indicating that the well-entrapped enzyme, as well as the polypyrrole films, exhibit good stability. Finally, the reproducibility of the immobilization technique is excellent. (c) 1993 John Wiley & Sons, Inc.     

Preparation of some immobilized linked enzyme systems and their use in the automated determination of disaccharides

1. Glucose oxidase (EC 1.1.3.4), amyloglucosidase (EC 3.2.1.3), invertase (EC 3.2.1.26) and beta-galactosidase (EC 3.2.1.23) were covalently attached via glutaraldehyde to the inside surface of nylon tube. 2. The linked enzyme system, comprising invertase immobilized within a nylon tube acting in series with glucose oxidase immobilized in a similar way, was used for the automated determination of sucrose. 3. The linked enzyme system, comprising beta-galactosidase immobilized within a nylon tube acting in series with glucose oxidase immobilized in a similar way, was used for the automated determination of lactose. 4. The linked enzyme system, comprising amyloglucosidase immobilized within a nylon tube acting in series with glucose oxidase immobilized in a similar way, was used for the automated determination of maltose. 5. Mixtures of glucose oxidase and amyloglucosidase were immobilized within the same piece of nylon tube and used for the automated determination of maltose. 6. Mixtures of glucose oxidase and invertase were immobilized within the same piece of nylon tube and used for the automated determination of sucrose.     

A chemiluminescence automatic analyser for the measurement of biological compounds

A compact automated analyser which could analyse constituents in biological fluids with a small sample volume and in a short time has been developed. The instrument was composed of a flow injection analysis system equipped with chemiluminometric detection and an immobilized enzyme column reactor used in combination. Chemiluminescence has high sensitivity, and its reaction proceeds very quickly. Furthermore, an immobilized enzyme column reactor can produce a sufficient amount of hydrogen peroxide from compounds in serum in a short time. When enzymes are used as reagents for the analysis of substances in blood or blood serum, the final signals emitted by different enzyme reactions are usually not only hydrogen peroxide but also ammonia, NAD(P)H and so on. However, the practical chemiluminescence method for ammonia and NAD(P)H has not been established. We have discovered a new practical method for ammonia and NAD(P)H using an enzyme column reactor consisting of both immobilized L -glutamate dehydrogenase and L -glutamate oxidase. The determinations of glucose and uric acid in serum by chemiluminometry after production of hydrogen peroxide by the respective oxidases are presented. A newly chemiluminometric determination of ammonia, NAD(P)H and its applications to other enzymatic analyses that give ammonia and NAD(P)H as a final signal are also described.     

The influence of inorganic phosphate and ATP on the kinetics of bovine heart muscle pyruvate kinase

Summary The mechanism of activation by inorganic phosphate and ATP of cardiac muscle pyruvate kinase was studied with the aid of steady-state kinetics. The enzyme was purified to homogeneity to a final specific activity of 400 units/ mg (phosphate buffer, pH 7.6, 25 °C). At pH 7.6 the enzyme displays Michaelis-Menten kinetics with respect to both its substrates, phosphoenolpyruvate and ADP. Substrate kinetic constants are: app.K_m(phosphoenolpyruvate) –0.04 mM, app.K_m(ADP) =0.22 mM. Under the conditions used in the standard assay the specific activity is greatly enhanced by inorganic phosphate (50 mM) or ATP (2.5 mM). Each of these modifiers, acting separately, increases the V_max without seriously affecting Michaelis constants and Hill coefficients. In the presence of both Pi and ATP, only a decrease in V_max was observed.The kinetics of activation by inorganic phosphate of pyruvate kinase was examined. Studying the effect of varying concentrations of Pi on the initial rate we obtained a hyperbolic saturation curve with the app. K_m(P_i) = 20 mM and V_max = 167 units/ mg. The evidence is presented that inorganic phosphate is a substrate for a side reaction catalyzed by cardiac pyruvate kinase. It is shown that in the presence of pyruvate, inorganic phosphate and ATP in the assay system, P_i is incorporated into acid-labile products of this reaction, inorganic pyrophosphate being one of them.These findings indicate the existence of an alternative reaction catalyzed by pyruvate kinase by which energy may be stored in the form of inorganic pyrophosphate.Abbreviations PEP phosphoenolpyruvate - Pi inorganic phosphate - TEA triethanolamine - EDTA ethylenediaminetetraacetate     

Method of purification of glucose oxidase by means of affinity chromatography on immunoabsorbent]

The possibility to purify glucose oxidase from Penicillium vitale on immunosorbent containing specific antibodies to the enzyme covalently bound with Sepharose 4B is studied. The method of affinity chromatography was applied, beside routine methods of fractionating blood serum proteins, to isolate specific antibodies from antiserum of rabbits immunized with glucose oxidase. Immobilized on Sepharose glucose oxidase was used as biospecific sorbent. Specific antibodies to the enzyme were isolated using chromatograpy of gamma-globulins mixture followed by protein desorption from the column with 1 M NaC1 and 3% glucose. Antibodies were immobilized by their covalent binding to activated Sepharose. The immunosorbent obtained was used to purify low active preparation of glucose oxidase by means of affinity chromatography under conditions worked out for the antibodies isolation. The enzyme was eluted from the column with 1 M NaC1 (pH 3.0) containing 3% glucose. 5-Fold purified enzyme preparation was isolated.     

A flow injection analysis system involving immobilized NADH oxidase in column form for clinical analysis.

A highly sensitive FIA system for chemiluminometric determination of reduced coenzyme, NADH, was developed, using immobilized NADH oxidase from Brevibacterium ammoniagenes. The enzyme catalyzed the oxidation of NADH generating hydrogen peroxide which emitted chemiluminescence when mixed with luminol and potassium ferricyanide. The immobilized enzyme reactor was a mini-column, measuring 1 or 2 mm in inner diameter and 20 mm in length, and the sample volume was only 1 microliter per assay, with a feeding speed of one sample per min and a lowest detection limit of 10 pmol NADH. A FIA system was also developed for the determination of magnesium in human serum, using an enzyme column reactor with simultaneously coimmobilized hexokinase, D-glucose-6-phosphate dehydrogenase, and NADH oxidase. The performance of the system was as satisfactory as a routine colorimetric assay, but with much higher sensitivity.     

Determination of phosphatidylcholine in a flow injection system using immobilized enzyme reactors

Two alternative procedures are described for the quantitative determination of phosphatidylcholine in a flow-injection system utilizing immobilized enzymes. Phospholipase C from Bacillus cereus and phospholipase D from cabbage were covalently bound to the surface of controlled-pore glass beads and the enzyme-derivatized beads were packed in small columns. In the first procedure, the phospholipase C column was connected with a second column containing coimmobilized alkaline phosphatase and choline oxidase. In the alternative procedure, the column packed with immobilized phospholipase D was connected with a column packed with immobilized choline oxidase. The hydrogen peroxide produced through the action of choline oxidase in both flow-injection systems was detected amperometrically. Both procedures are suitable for an accurate and rapid quantitation of phosphatidylcholine. The sensitivity of the method based on phospholipase C and alkaline phosphatase is higher than that using phospholipase D. Quantitation of phosphatidylcholine at the nanomole level can be easily obtained using the first method.     

Immobilization of -glucose oxidase onto a hydrogen peroxide permselective membrane and application for an enzyme electrode

A hydrogen peroxide permselective membrane with asymmetric structure was prepared and -glucose oxidase (EC 1.1.3.4) was immobilized onto the porous layer. The activity of the immobilized -glucose oxidase membrane was 0.34 units cm⁻² and the activity yield was 6.8% of that of the native enzyme. Optimum pH, optimum temperature, pH stability and temperature stability were found to be pH 5.0, 30–40°C, pH 4.0–7.0 and below 55°C, respectively. The apparent Michaelis constant of the immobilized -glucose oxidase membrane was 1.6 × 10⁻³ mol l⁻¹ and that of free enzyme was 4.8 × 10⁻² mol l⁻¹. An enzyme electrode was constructed by combination of a hydrogen peroxide electrode with the immobilized -glucose oxidase membrane. The enzyme electrode responded linearly to -glucose over the concentration 0–1000 mg dl⁻¹ within 10 s. When the enzyme electrode was applied to the determination of -glucose in human serum, within day precision (CV) was 1.29% for -glucose concentration with a mean value of 106.8 mg dl⁻¹. The correlation coefficient between the enzyme electrode method and the conventional colorimetric method using a free enzyme was 0.984. The immobilized -glucose oxidase membrane was sufficiently stable to perform 1000 assays (2 to 4 weeks operation) for the determination of -glucose in human whole blood. The dried membrane retained 77% of its initial activity after storage at 4°C for 16 months.     

New assay for enzymatic phosphate release: application to aspartate transcarbamylase and other enzymes

The colorimetric method for phosphate determination described in the preceding paper is adapted for the assay of orthophosphate liberated in the aspartate transcarbamylase reaction. The method provides for simple, accurate, and sensitive measurement of enzyme activity. The assay uses ammonium molybdate and zinc acetate to form a colored complex with the enzymatically released phosphate; mild conditions which minimize the nonenzymatic background degradation of the substrate, carbamoyl phosphate, are used. Since the assay procedure is relatively rapid, it is especially attractive in situations where results are desired immediately. The method can be used for the assay of any enzyme which releases inorganic phosphate, even in the presence of labile organophosphate compounds.     

Biosensor for rapid phosphate monitoring in a sequencing batch reactor (SBR) system

A thick-film phosphate biosensor based on hydrogel immobilized pyruvate oxidase (POD) has been developed for rapid phosphate process control monitoring in an experimental sequencing batch reactor (SBR) system. We have employed a phosphate biosensor in an off-line monitoring of phosphate concentrations in a bench scale SBR. Measurements with biosensor show a good correlation (r2=0.98) with those of commercial colorimetric phosphate testing kits. The signal response time was 1 min with a detection limit of 5 microM. The biosensor method showed a good operational stability, needed less experimental procedures and a small sample size (approximately 20 microl). This allows its practical application for rapid phosphate measurements to obtain real time process data in a SBR system.