Binding of novel 9-O–N-aryl/arylalkyl amino carbonyl methyl berberine analogs to poly(U)-poly(A)·poly(U) triplex and comparison to the duplex poly(A)-poly(U)

Interaction of the 9-O–N-aryl/arylalkyl amino carbonyl methyl substituted analogs of the anticancer isoquinoline alkaloid berberine with RNA triplex, poly(U)-poly(A)·poly(U) has been studied in comparison to the duplex poly(A)-poly(U), using multiple biophysical techniques. Spectrophotometric and spectrofluorimetric studies established the non-cooperative binding mode of all the analogs with both the duplex and the triplex. However, berberine exhibited cooperative binding with poly(A)-poly(U) and non-cooperative binding with poly(U)-poly(A)·poly(U). Analog BER1 showed the highest affinity to both the duplex and the triplex followed by BER2 and BER3. The overall binding affinity varied as BER1 > BER2 > BER3 > BER. The magnitude of the quantum efficiency values (Q > 1) revealed that energy was transferred from the bases of the triplex and the duplex to the analogs. Comparative ferrocyanide quenching and viscosity studies unambiguously established a stronger intercalative geometry of the analogs to both the triplex and the duplex in comparison to berberine. Circular dichroism studies revealed that the alkaloids perturbed the conformation of both RNA helices. The binding of all the alkaloids was found to be exothermic from isothermal titration studies. Binding of the analogs was highly entropy driven while that of berberine was enthalpy dominated. The results presented here reveal strong and specific binding of these new berberine analogs to the RNA triplex and duplex and highlight the remarkable influence of the 9-substitution on the interaction profile.     

Antisera to poly(A)-poly(U)-poly(I) contain antibody subpopulations specific for different aspects of the triple helix.

Rabbit antibodies to the triple-helical polynucleotide poly(A)-poly(U)-poly(I) were fractionated into three major antibody populations, each recognizing a different conformational feature of the triple-helical immunogen. Two distinct populations were purified from precipitates made with poly(A)-poly(U)-poly(U) and poly(A)-poly(I)-poly(I). The former reacted with double-stranded poly(A)-poly(U) or poly(I)-poly(C), and similar populations could be purified with either double-stranded form. The second population recognized the poly(A)-poly(I) region of the triple helix, and the third required all three strands for reactivity. These immunochemical studies suggest that the poly(A) and poly(U) have the same orientation in the triple-helicical poly(A)-poly(U)-poly(I) as in the double-helical poly(A)-poly(U), in which they have Watson-Crick base pairing.     

Antiviral activity of poly(A)-poly(U) duplexes modified with cis-diammine-dichloroplatinum (II)]

Polyribonucleotide duplex poly(A).poly(U) was modified with cis-diammine dichloroplatinum (II) (cis-DDP). It was shown that the antiinfluenza protective activity of the modified duplex in mice increased with the degree of modification (rb) rising up to 0.2. The effect was different from that for poly(I).poly(C) and poly(G).poly(C). The interferon titers in the murine brain increased in parallel with increasing of the antiviral activity. It was assumed that the structural specificity of the poly(A).poly(U) duplex was responsible for the phenomenon and that cis-DDP interaction with N(7) atoms of the adenine heterocycles blocked the "abnormal" Hoogsteen pairing of adenines with uracils. As a result the antiviral activity increased because of lowering the quantity of the intramolecular defects and increasing the length of the regular double-stranded regions.     

Properties of unprimed poly(A)-poly(U) synthesis by Caulobacter crescentus RNA polymerase.

Some properties of unprimed poly(A)-poly(U) synthesis by DNA-dependent RNA polymerase from Caulobacter crescentus were examined. The reaction required ATP and UTP as substrates and manganese as a divalent cation. Rifampicin completely inhibited the reaction at a concentration of 1 micron/ml, and the enzyme catalyzed the polymer synthesis well regardless of the presence of GTP, CTP or both. The chain length of the poly(A)-poly(U) synthesized was about one hundred base pairs, as estimated from a sedimentation velocity and the molar ratio of [3H]AMP to [gamma-32P]ATP incorporated into the poly(A)-poly(U). The reaction was dependent on the square of the enzyme concentration and the enzyme dimers formed complexes with poly(A)-poly(U) during the reaction.     

The helix-coil transitions of poly (dA)-poly (dT) and poly (dA-dT)-poly (dA-dT)

Helix–coil transition curves are calculated for poly (dA) poly(dT) and poly (dA-dT) poly (dA-dT) using the integral equation approach of Goel and Montroll.⁵ The transitions are described by the loop entropy model with the exponent of the loop entropy factor, k, remaining an arbitrary constant. The theoretical calculations are compared with experimental transition curves of the two polymers. Results indicate that the stacking energies for these two polymers differ by about 1 kcal/mole of base pairs. Also, a fit between theory and experiment was not possible for k > 1.70.     

Stability of triple-helical poly(dT)-poly(dA)-poly(dT) DNA with counterions.

Structural conformation of triple-helical poly(dT)-poly(dA)-poly(dT) has been a very controversial issue recently. Earlier investigations, based on fiber diffraction data and molecular modeling, indicated an A-form conformation with C'3-endo sugar pucker. On the other hand, Raman, solution infrared spectral, and NMR studies show a B-form structure with C'2-endo sugars. In accordance with these experimental results, a theoretical model with B-form, C'2-endo sugars was proposed in 1993. In the present work we investigate the dynamics and stability of the two conformations within the effective local field approach applied to the normal mode calculations for the system. The presence of counterions was explicitly taken into account. Stable equilibrium positions for the counterions were calculated by analyzing the normal mode dynamics and free energy of the system. The breathing modes of the triple helix are shifted to higher frequencies over those of the double helix by 4-16 cm-1. The characteristic marker band for the B conformation at 835 cm-1 is split up into two marker bands at 830 and 835 cm-1. A detailed comparison of the normal modes and the free energies indicates that the B-form structure, with C'2-endo sugar pucker, is more stable than the A-form structure. The normal modes and the corresponding dipole moments are found to be in close agreement with recent spectroscopic findings.     

Nuclear penetration and stimulation of nucleic acids synthesis by poly(A)-poly(U) in mammalian cells

The rapid penetration of poly(A)-poly(U) into cell nuclei is shown by radioautography, by recovery of acid-precipitable material from isolated nuclei and by sucrose gradient centrifugation of nuclear lysates. The majority of poly(A)-poly(U) remains intact in the nuclei for at least h. This penetration is increased 20-fold by pretreatment of the cells with DEAE Dextran. In cells treated with DEAE Dextran, DNA and RNA syntheses are stimulated by poly(A)-poly(U) from the time the polymer complex is added and for at least h.     

Effect of non-complementary nucleotides on the rate of helix formation: kinetics of formation of poly (I)-poly (C,I) and poly (I)-poly (C,U) complexes

Apparent second-order rate constants for complex formation between poly (I) and poly (C) and copolymers of C containing non-complementary I or U residues have been determined spectrophotometrically. The rate constants decrease as the concentration of either I or U in the C strands increases–the effect seems insensitive to the species of residue involved, when differences in the thermal stabilities of the poly (I) poly (C,I) and poly (I). poly (C,U) complexes are taken into account. These results suggest that low concentrations of relatively stable defects can alter the apparent kinetic “complexity” of polynucleotides as determined by hybridization methods (C₀t analysis).     

Antigen-Specific T-cell factors in the immune response to poly(Tyr,Glu)-poly(Pro)-poly(Lys)

The production by T cells of an antigen-specific factor capable of replacing the T-cell function in specific antibody formation was used as a tool for studying the cellular aspects of the genetic control of immune responses. The ability of different T-cell populations to produce a cooperative signal and the ability of B-cell populations to react to this signal were studied in different mouse strains. The antigen used was the synthetic polypeptide poly(LTyr,LGlu)-poly-(LPro) —poly(lXys), (T,G)-Pro -L, the response to which was found not to beH-2-linked. It was found that the SWR strain of mice, a low responder to (T,G)-Pro -L, is not capable of producing a T-cell factor specific to this antigen, but its B cells react normally to an active factor produced in a high responder strain. In the DBA/1 strain, also a low responder to (T,G)-Pro -L, the bone marrow cells are not able to cooperate with an active T-cell factor to produce anti-(T,G)-Pro —L-specific antibodies, while their T cells do produce a (T,G)-Pro -L-specific factor. The SWR (low responder) B cells can be triggered by DBA/1 (low responder) T cells factor specific to (T,G)-Pro —L to produce an antibody response to this immunogen. These results suggest that the immune response to (T,G)-Pro -L is controlled by two genes which are expressed in different lymphocyte populations.     

Synthesis of novel poly(dG)-poly(dG)-poly(dC) triplex structure by Klenow exo- fragment of DNA polymerase I

The extension of the G-strand of long (700 bp) poly(dG)–poly(dC) by the Klenow exo⁻ fragment of DNA polymerase I yields a complete triplex structure of the H-DNA type. High-performance liquid chromatography analysis demonstrates that the length of the G-strand is doubled during the polymerase synthesis. Fluorescence resonance energy transfer analysis shows that the 5′ ends of the G- and the C-strands, labeled with fluorescein and TAMRA, respectively, are positioned close to each other in the product of the synthesis. Atomic force microscopy morphology imaging shows that the synthesized structures lack single-stranded fragments and have approximately the same length as the parent 700 bp poly(dG)–poly(dC). CD spectrum of the polymer has a large negative peak at 278 nm, which is characteristic of the poly(dG)–poly(dG)–poly(dC) triplex. The polymer is resistant to DNase and interacts much more weakly with ethidium bromide as compared with the double-stranded DNA.     

Acid-base and copper (II) complexation equilibria of poly(inosinic)-poly(cytidylic)

The acid-base and copper (II) complexing properties of the heteropolynucleotide poly(inosinic)-poly(cytidylic) acid were studied by means of potentiometric, spectrophotometric, CD, and molecular fluorescence titrations in a working aqueous medium of 0.15 M ionic strength at 37°C. The study of the acid-base equilibria has proved the existence of four different species in the pH interval 2–11. Two new species are detected in the presence of copper(II) ion, at acidic and neutral pH values. Spectrophotometric, CD, melting, and fluorescence data were treated with a multivariate curve resolution procedure that allowed the determination of the number of species simultaneously present in each system [acid-base equilibria, copper(II) complexation equilibria], and the estimation of their concentration profiles and of the pure spectra for each species. From the concentration profiles an unambiguous assignment of which species are present at any pH conditions can be made. Furthermore, the knowledge of the pure uv-visible, fluorescence, and CD spectra recovered by the proposed resolution method for each species brings important structural information. When this mathematical approach was applied to the thermal denaturation data, the melting profile and the uv pure spectra for all the different species or conformations formed in the melting process, were calculated. © 1997 John Wiley & Sons, Inc. Biopoly 42: 271–283, 1997     

The vibrational spectra and structure of poly(rA-rU)-poly(rA-rU)

Infrared and Raman spectra of aqueous poly(rA-rU)·poly(rA-rU), the double-helical complex containing strands of alternating riboadenylate and ribouridylate residues, display significant differences from one another and from corresponding spectra of poly(rA)·poly(rU), the double-helical complex of riboadenylate and ribouridylate homopolymers. Parallel studies on the copolymer and homopolymer complexes by cesium sulfate density gradient centrifugation, ultraviolet absorption spectroscopy, hydrogenion titration, 1-N oxidation of adenine residues by monoperphthalic acid and X-ray diffraction reveal, however, that the geometry of base pairing between adenine and uracil is closely similar in each complex and apparently of the Watson-Crick type. Therefore the differences observed between vibrational spectra of poly (rA-rU)·poly (rA-rU) and poly(rA)·poly(rU) are not due to different base-pairing schemes but may be attributed to differences in vibrational coupling between vertically stacked bases. Vibrational coupling may also account for the differences between infrared and Raman spectra of the same complex. Thus, the present results indicate that infrared and Raman frequencies of RNA in the region 1750–1550 cm^?1 should be dependent on the base sequence.     

Poly(dG)-poly(dC) DNA appears shorter than poly(dA)-poly(dT) and possibly adopts an A-related conformation on a mica surface under ambient conditions

Three types of DNA: approximately 2700 bp polydeoxyguanylic olydeoxycytidylic acid [poly(dG)-poly(dC)], approximately 2700 bp polydeoxyadenylic polydeoxythymidylic acid [poly(dA)-poly(dT)] and 2686 bp linear plasmid pUC19 were deposited on a mica surface and imaged by atomic force microscopy. Contour length measurements show that the average length of poly(dG)-poly(dC) is approximately 30% shorter than that of poly(dA)-poly(dT) and the plasmid. This led us to suggest that individual poly(dG)-poly(dC) molecules are immobilized on mica under ambient conditions in a form which is likely related to the A-form of DNA in contrast to poly(dA)-poly(dT) and random sequence DNA which are immobilized in a form that is related to the DNA B-form.     

Interferon induction by platinum(II)-poly(I).poly(C) complexes

The effect of the interaction between poly(I).poly(C) and cis-dichloro-diammineplatinum(II) (cis-Pt), its trans analogue and chloro-diethylene-triamminoplatinum(II) (dien-Pt) on interferon induction activity was investigated. The covalent monodentate fixation of the three compounds on N7 of inosine has different effects on the structure and thermostability of poly(I). poly(C) which is well reflected by the interferon induction activity of the samples. Thus, the sandwich stabilization by dien-Pt at low binding ratios is manifested by an increased interferon induction and a high resistance towards RNAase degradation. The destabilization of the duplex by cis-Pt decreases interferon induction, accompanied by an increase in RNAase sensitivity of the complexes. In the case of trans-Pt the duplex structure is little perturbed and interferon induction is essentially maintained.     

Biodegradable polymeric nanospheres formed by temperature-induced phase transition in a mixture of poly(lactide-co-glycolide) and poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer

The mixture of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer(F-127) and PLGA (poly(lactide-co-gycolide)) forms a liquid state above their phase transition temperatures, and the phase-separated state is induced by decreasing the temperature below the phase transition temperature. On the basis of the temperature-induced phase transition behavior in the mixture of F-127 and PLGA, a novel method for the preparation of drug-loaded PLGA nanospheres was designed and characterized by measuring the loading amount, the encapsulation efficiency, and the drug release pattern. Paclitaxel, used as a potent anticancer drug, was selected as a model drug.     

Nature of Cu(II)-poly(glutamic acid) complex in aqueous solution

Complex formation of poly(glutumic acid) with cupric ions in aqueous solution was investigated by three different methods: optical spectroscopy, optical rotatory dispersion, and electron spin resonance. Formation of a characteristic complex was found to occur in a pH region suitable for the helix-coil transition. An analysis of the ESH spectrum of the complex is given, and the results of calculation of bonding parameters suggest that the bond between copper and nitrogen atoms had an appreciably covalent character. The change in the secondary structure of the polymer as a result of complex formation is discussed.