Rotation of the proteolipid ring in the V-ATPase

V0V1-ATPase is a proton-translocating ATPase responsible for acidification of eukaryotic intracellular compartments and for ATP synthesis in archaea and some eubacteria. We demonstrated recently the rotation of the central stalk subunits in V1, a catalytic sector of V0V1-ATPase (Imamura, H., Nakano, M., Noji, H., Muneyuki, E., Ohkuma, S., Yoshida, M., and Yokoyama, K. (2003) Proc. Natl. Acad. Sci. U. S. A. 100, 2312-2315), but the rotation of the proteolipid ring, a predicted counterpart rotor in the membrane V0 sector, has remained to be proven. V0V1-ATPase that retained sensitivity to N',N'-dicyclohexylcarbodiimide was isolated from Thermus thermophilus, immobilized onto a glass surface through the N termini of the A subunits of V1, and decorated with a bead attached to a proteolipid subunit of V0. Rotation of beads was observed in the presence of ATP, and direction of rotation was always counterclockwise viewed from the membrane side. The rotation proceeded at approximately 3.0 rev/s in average at 4 mm ATP and was abolished by N',N'-dicyclohexylcarbodiimide treatment. Thus, the rotation of the central stalk in V1 accompanies rotation of a proteolipid ring of V0 in the functioning V0V1-ATPase.     

Structure and subunit arrangement of the A-type ATP synthase complex from the archaeon Methanococcus jannaschii visualized by electron microscopy

In Archaea, bacteria, and eukarya, ATP provides metabolic energy for energy-dependent processes. It is synthesized by enzymes known as A-type or F-type ATP synthase, which are the smallest rotatory engines in nature (Yoshida, M., Muneyuki, E., and Hisabori, T. (2001) Nat. Rev. Mol. Cell. Biol. 2, 669-677; Imamura, H., Nakano, M., Noji, H., Muneyuki, E., Ohkuma, S., Yoshida, M., and Yokoyama, K. (2003) Proc. Natl. Acad. Sci. U. S. A. 100, 2312-2315). Here, we report the first projected structure of an intact A(1)A(0) ATP synthase from Methanococcus jannaschii as determined by electron microscopy and single particle analysis at a resolution of 1.8 nm. The enzyme with an overall length of 25.9 nm is organized in an A(1) headpiece (9.4 x 11.5 nm) and a membrane domain, A(0) (6.4 x 10.6 nm), which are linked by a central stalk with a length of approximately 8 nm. A part of the central stalk is surrounded by a horizontal-situated rodlike structure ("collar"), which interacts with a peripheral stalk extending from the A(0) domain up to the top of the A(1) portion, and a second structure connecting the collar structure with A(1). Superposition of the three-dimensional reconstruction and the solution structure of the A(1) complex from Methanosarcina mazei G?1 have allowed the projections to be interpreted as the A(1) headpiece, a central and the peripheral stalk, and the integral A(0) domain. Finally, the structural organization of the A(1)A(0) complex is discussed in terms of the structural relationship to the related motors, F(1)F(0) ATP synthase and V(1)V(0) ATPases.     

The 40-kDa subunit enhances but is not required for activity of the coated vesicle proton pump.

We have previously demonstrated reassembly of a functional vacuolar (H+)-ATPase from clathrin-coated vesicles using the dissociated peripheral domain (V1) and the membrane-bound integral domain (V0) (Puopolo, K., and Forgac, M. (1990) J. Biol. Chem. 265, 14836-14841). We have used this reassembly procedure to test the function of the 40-kDa subunit of the coated vesicle (H+)-ATPase. In the absence of V0, a fraction of the peripheral subunits reassemble into a V1 subcomplex which contains the 73-kDa A subunit, the 58-kDa B subunit, and the 34- and 33-kDa subunits but lacks the 40-kDa subunit. This subcomplex, which sediments with a mass of approximately 500 kDa, can be separated from the remaining monomeric subunits (and the 40-kDa subunit) by density gradient sedimentation. When dissociated with 0.36 M KI, 2.5 mM ATP, and 2.5 mM MgSO4, and added to membranes from which V1 has been dissociated, this V1(-40 kDa) subcomplex is able to reassemble with V0 to give a (H+)-ATPase with a proton pumping activity approximately half that obtained in the presence of the 40-kDa subunit. The undissociated subcomplex is not competent for assembly of a functional (H+)-ATPase. Interestingly, the monomeric fraction obtained from density gradient sedimentation contains the 40-kDa subunit but lacks the 34-kDa subunit. This monomeric fraction is nevertheless also able to assemble with V0 to give a functional proton pump. The V1V0 complexes assembled in the absence of either the 40- or 34-kDa subunits, while active, are not stable to detergent solubilization and immunoprecipitation, suggesting that both of these subunits play a role in stabilization of the (H+)-ATPase complex. Evidence for interaction between the 40- and 33-kDa subunits is also presented.     

A novel role for subunit C in mediating binding of the H+-V-ATPase to the actin cytoskeleton

Primary proton transport by V-ATPases is regulated via the reversible dissociation of the V(1)V(0) holoenzyme into its V(1) and V(0) subcomplexes. Laser scanning microscopy of different tissues from the tobacco hornworm revealed co-localization of the holoenzyme and F-actin close to the apical membranes of the epithelial cells. In midgut goblet cells, no co-localization was observed under conditions where the V(1) complex detaches from the apical membrane. Binding studies, however, demonstrated that both the V(1) complex and the holoenzyme interact with F-actin, the latter with an apparently higher affinity. To identify F-actin binding subunits, we performed overlay blots that revealed two V(1) subunits as binding partners, namely subunit B, resembling the situation in the osteoclast V-ATPase (Holliday, L. S., Lu, M., Lee, B. S., Nelson, R. D., Solivan, S., Zhang, L., and Gluck, S. L. (2000) J. Biol. Chem. 275, 32331-32337), but, in addition, subunit C, which gets released during reversible dissociation of the holoenzyme. Overlay blots and co-pelleting assays showed that the recombinant subunit C also binds to F-actin. When the V(1) complex was reconstituted with recombinant subunit C, enhanced binding to F-actin was observed. Thus, subunit C may function as an anchor protein regulating the linkage between V-ATPase and the actin-based cytoskeleton.     

Cloning and sequencing of V-ATPase subunit d from mung bean and its function in passive proton transport

We have previously shown that vacuolar H+-ATPase subcomplex V_o from mung bean contains subunit d, however, its sequence and function were unknown. In the present study, we report the cloning and recombinant over expression of subunit d from mung bean in E. coli. To study the function of subunit d, two vacuolar H+-ATPase subcomplexes V_o from mung bean were purified-one containing subunits a and c(c’,c”) and the other containing subunits a, c(c’,c”) and d. After reconstitution of the purified V_o subcomplexes into liposomes, the proton translocation was studied. Our results show that the V_o subcomplex in the absence of subunit d is a passive proton channel, while the V_o subcomplex in the presence of the subunit d is not. Taken together, our data supports the conclusion that the subunit d of the plant vacuolar H⁺-ATPase from mung bean is positioned at the central stalk and involved in the proton translocation across the tonoplast membrane.     

The E and G subunits of the yeast V-ATPase interact tightly and are both present at more than one copy per V1 complex

The E and G subunits of the yeast V-ATPase are believed to be part of the peripheral or stator stalk(s) responsible for physically and functionally linking the peripheral V1 sector, responsible for ATP hydrolysis, to the membrane V0 sector, containing the proton pore. The E and G subunits interact tightly and specifically, both on a far Western blot of yeast vacuolar proteins and in the yeast two-hybrid assay. Amino acids 13-79 of the E subunit are critical for the E-G two-hybrid interaction. Different tagged versions of the G subunit were expressed in a diploid cell, and affinity purification of cytosolic V1 sectors via a FLAG-tagged G subunit resulted in copurification of a Myc-tagged G subunit, implying more than one G subunit was present in each V1 complex. Similarly, hemagglutinin-tagged E subunit was able to affinity-purify V1 sectors containing an untagged version of the E subunit from heterozygous diploid cells, suggesting that more than one E subunit is present. Overexpression of the subunit G results in a destabilization of subunit E similar to that seen in the complete absence of subunit G (Tomashek, J. J., Graham, L. A., Hutchins, M. U., Stevens, T. H., and Klionsky, D. J. (1997) J. Biol. Chem. 272, 26787-26793). These results are consistent with recent models showing at least two peripheral stalks connecting the V1 and V0 sectors of the V-ATPase and would allow both stalks to be based on an EG dimer.     

Structural characterization of an ATPase active F1-/V1 -ATPase (alpha3beta3EG) hybrid complex

Co-reconstitution of subunits E and G of the yeast V-ATPase and the alpha and beta subunits of the F(1)-ATPase from the thermophilic Bacillus PS3 (TF(1)) resulted in an alpha(3)beta(3)EG hybrid complex showing 53% of the ATPase activity of TF(1). The alpha(3)beta(3)EG oligomer was characterized by electron microscopy. By processing 40,000 single particle projections, averaged two-dimensional projections at 1.2-2.4-nm resolution were obtained showing the hybrid complex in various positions. Difference mapping of top and side views of this complex with projections of the atomic model of the alpha(3)beta(3) subcomplex from TF(1) (Shirakihara, Y., Leslie, A. G., Abrahams, J. P., Walker, J. E., Ueda, T., Sekimoto, Y., Kambara, M., Saika, K., Kagawa, Y., and Yoshida, M. (1997) Structure 5, 825-836) demonstrates that a seventh mass is located inside the shaft of the alpha(3)beta(3) barrel and extends out from the hexamer. Furthermore, difference mapping of the alpha(3)beta(3)EG oligomer with projections of the A(3)B(3)E and A(3)B(3)EC subcomplexes of the V(1) from Caloramator fervidus (Chaban, Y., Ubbink-Kok, T., Keegstra, W., Lolkema, J. S., and Boekema, E. J. (2002) EMBO Rep. 3, 982-987) shows that the mass inside the shaft is made up of subunit E, whereby subunit G was assigned to belong at least in part to the density of the protruding stalk. The formation of an active alpha(3)beta(3)EG hybrid complex indicates that the coupling subunit gamma inside the alpha(3)beta(3) oligomer of F(1) can be effectively replaced by subunit E of the V-ATPase. Our results have also demonstrated that the E and gamma subunits are structurally similar, despite the fact that their genes do not show significant homology.     

Deletion analysis of the subunit genes of V-type Na+-ATPase from Enterococcus hirae

The V1Vo-ATPase from Enterococcus hirae catalyzes ATP hydrolysis coupled with sodium translocation. Mutants with deletions of each of 10 subunits (NtpA, B, C, D, E, F, G, H, I, and K) were constructed by insertion of a chloramphenicol acetyltransferase gene into the corresponding subunit gene in the genome. Measurements of cell growth rates, 22Na+ efflux activities, and ATP hydrolysis activities of the membranes of the deletion mutants indicated that V-ATPase requires nine of the subunits, the exception being the NtpH subunit. The results of Western blotting and V1-ATPase dissociation analysis suggested that the A, B, C, D, E, F, and G subunits constitute the V1 moiety, whereas the V0 moiety comprises the I and K subunits.     

Reconstitution of vacuolar-type rotary H+-ATPase/synthase from Thermus thermophilus

Vacuolar-type rotary H(+)-ATPase/synthase (V(o)V(1)) from Thermus thermophilus, composed of nine subunits, A, B, D, F, C, E, G, I, and L, has been reconstituted from individually isolated V(1) (A(3)B(3)D(1)F(1)) and V(o) (C(1)E(2)G(2)I(1)L(12)) subcomplexes in vitro. A(3)B(3)D and A(3)B(3) also reconstituted with V(o), resulting in a holoenzyme-like complexes. However, A(3)B(3)D-V(o) and A(3)B(3)-V(o) did not show ATP synthesis and dicyclohexylcarbodiimide-sensitive ATPase activity. The reconstitution process was monitored in real time by fluorescence resonance energy transfer (FRET) between an acceptor dye attached to subunit F or D in V(1) or A(3)B(3)D and a donor dye attached to subunit C in V(o). The estimated dissociation constants K(d) for V(o)V(1) and A(3)B(3)D-V(o) were ～0.3 and ～1 nm at 25 °C, respectively. These results suggest that the A(3)B(3) domain tightly associated with the two EG peripheral stalks of V(o), even in the absence of the central shaft subunits. In addition, F subunit is essential for coupling of ATP hydrolysis and proton translocation and has a key role in the stability of whole complex. However, the contribution of the F subunit to the association of A(3)B(3) with V(o) is much lower than that of the EG peripheral stalks.     

Subunit H of the vacuolar (H+) ATPase inhibits ATP hydrolysis by the free V1 domain by interaction with the rotary subunit F

The vacuolar (H+) ATPases (V-ATPases) are large, multimeric proton pumps that, like the related family of F1F0 ATP synthases, employ a rotary mechanism. ATP hydrolysis by the peripheral V1 domain drives rotation of a rotary complex (the rotor) relative to the stationary part of the enzyme (the stator), leading to proton translocation through the integral V0 domain. One mechanism of regulating V-ATPase activity in vivo involves reversible dissociation of the V1 and V0 domains. Unlike the corresponding domains in F1F0, the dissociated V1 domain does not hydrolyze ATP, and the free V0 domain does not passively conduct protons. These properties are important to avoid generation of an uncoupled ATPase activity or an unregulated proton conductance upon dissociation of the complex in vivo. Previous results (Parra, K. J., Keenan, K. L., and Kane, P. M. (2000) J. Biol. Chem. 275, 21761-21767) showed that subunit H (part of the stator) inhibits ATP hydrolysis by free V1. To test the hypothesis that subunit H accomplishes this by bridging rotor and stator in free V1, cysteine-mediated cross-linking studies were performed. Unique cysteine residues were introduced over the surface of subunit H from yeast by site-directed mutagenesis and used as the site of attachment of the photo-activated cross-linking reagent maleimido benzophenone. After UV-activated cross-linking, cross-linked products were identified by Western blot using subunit-specific antibodies. The results indicate that the subunit H mutant S381C shows cross-linking between subunit H and subunit F (a rotor subunit) in the free V1 domain but not in the intact V1V0 complex. These results indicate that subunits H and F are proximal in free V1, supporting the hypothesis that subunit H inhibits free V1 by bridging the rotary and stator domains.     

A 100 kDa polypeptide associates with the V0 membrane sector but not with the active oat vacuolar H(+)-ATPase, suggesting a role in assembly

The vacuolar H(+)-ATPase (V-ATPase) is responsible for acidifying endomembrane compartments in eukaryotic cells. Although a 100 kDa subunit is common to many V-ATPases, it is not detected in a purified and active pump from oat (Ward J.M. and Sze H. (1992) Plant Physiol. 99, 925-931). A 100 kDa subunit of the yeast V-ATPase is encoded by VPH1. Immunostaining revealed a Vph1p-related polypeptide in oat membranes, thus the role of this polypeptide was investigated. Membrane proteins were detergent-solubilized and size-fractionated, and V-ATPase subunits were identified by immunostaining. A 100 kDa polypeptide was not associated with the fully assembled ATPase; however, it was part of an approximately 250 kDa V0 complex including subunits of 36 and 16 kDa. Immunostaining with an affinity-purified antibody against the oat 100 kDa protein confirmed that the polypeptide was part of a 250 kDa complex and that it had not degraded in the approximately 670 kDa holoenzyme. Co-immunoprecipitation with a monoclonal antibody against A subunit indicated that peripheral subunits exist as assembled V1 subcomplexes in the cytosol. The free V1 subcomplex became attached to the detergent-solubilized V0 sector after mixing, as subunits of both sectors were co-precipitated by an antibody against subunit A. The absence of this polypeptide from the active enzyme suggests that, unlike the yeast Vph1p, the 100 kDa polypeptide in oat is not required for activity. Its association with the free Vo subcomplex would support a role of this protein in V-ATPase assembly and perhaps in sorting.     

Resolution of the V1 ATPase from Manduca sexta into subcomplexes and visualization of an ATPase-active A3B3EG complex by electron microscopy

The effect of the ATPase activity of Manduca sexta V(1) ATPase by the amphipathic detergent lauryldimethylamine oxide (LDAO) and the relationship of these activities to the subunit composition of V(1) were studied. The V(1) was highly activated in the presence of 0.04-0.06% LDAO combined with release of the subunits H, C, and F from the enzyme. Increase of LDAO concentration to 0.1-0.2% caused the characterized subcomplexes A(3)B(3)HEGF and A(3)B(3)EG with a remaining ATPase activity of 52 and 65%, respectively. The hydrolytic-active A(3)B(3)EG subcomplex has been visualized by electron microscopy showing six major masses of density in a pseudo-hexagonal arrangement surrounding a seventh mass. The compositions of the various subcomplexes and fragments of V(1) provide an organization of the subunits in the enzyme in the framework of the known three-dimensional reconstruction of the V(1) ATPase from M. sexta (Radermacher, M., Ruiz, T., Wieczorek, H., and Grüber, G. (2001) J. Struct. Biol. 135, 26-37).     

Reconstitution in vitro of V1 complex of Thermus thermophilus V-ATPase revealed that ATP binding to the A subunit is crucial for V1 formation

Vacuolar-type H(+)-ATPase (V-ATPase or V-type ATPase) is a multisubunit complex comprised of a water-soluble V(1) complex, responsible for ATP hydrolysis, and a membrane-embedded V(o) complex, responsible for proton translocation. The V(1) complex of Thermus thermophilus V-ATPase has the subunit composition of A(3)B(3)DF, in which the A and B subunits form a hexameric ring structure. A central stalk composed of the D and F subunits penetrates the ring. In this study, we investigated the pathway for assembly of the V(1) complex by reconstituting the V(1) complex from the monomeric A and B subunits and DF subcomplex in vitro. Assembly of these components into the V(1) complex required binding of ATP to the A subunit, although hydrolysis of ATP is not necessary. In the absence of the DF subcomplex, the A and B monomers assembled into A(1)B(1) and A(3)B(3) subcomplexes in an ATP binding-dependent manner, suggesting that ATP binding-dependent interaction between the A and B subunits is a crucial step of assembly into V(1) complex. Kinetic analysis of assembly of the A and B monomers into the A(1)B(1) heterodimer using fluorescence resonance energy transfer indicated that the A subunit binds ATP prior to binding the B subunit. Kinetics of binding of a fluorescent ADP analog, N-methylanthraniloyl ADP (mant-ADP), to the monomeric A subunit also supported the rapid nucleotide binding to the A subunit.     

A gene encoding the proteolipid subunit of Sulfolobus acidocaldarius ATPase complex

An analysis of genes for the major two subunits of the membrane-associated ATPase from an acidothermophilic archaebacterium, Sulfolobus acidocaldarius, suggested that it belongs to a different ATPase family from the F1-ATPase (Denda, K., Konishi, J., Oshima, T., Date, T., and Yoshida, M. (1988) J. Biol. Chem. 263, 17251-17254). In the same operon of the above two genes we found a gene encoding a very hydrophobic protein of 101 amino acids (Mr = 10,362). A proteolipid was purified from the membranes of this bacteria in which partial amino acid sequences matched with the sequence deduced from the gene. Significant amino acid sequence homology and a similar hydropathy profile appeared when the sequence was compared with the 8-kDa proteolipid subunit of F0F1-ATPases. It is about 30 amino acids larger than the 8-kDa proteolipid and has a small (11-amino acid) repeat sequence. However, it is distinct from the 16-kDa proteolipid subunit of an eukaryotic vacuolar H+-ATPase (Mandel, M., Moriyama, Y., Hulmes, J.D., Pan, Y.-E., Nelson, H., and Nelson, N. (1988) Proc. Natl. Acad. Sci. U.S.A. 85,5521-5524).     

桔小实蝇V-ATPase G亚基基因的克隆及组织表达特异性分析

空泡型ATP酶（vacuolar-type H⁺-ATPase, V-ATPase）作为质子泵几乎在所有的真核生物细胞中发挥重要作用。本研究利用RT-PCR和RACE技术获得了桔小实蝇Bactrocera dorsalis (Hendel)V-ATPase G亚基序列全长, 命名为BdorATPG。测序结果表明, BdorATPG阅读框全长354 bp, 编码117个氨基酸。氨基酸序列比对表明, BdorATPG的N端序列与其他物种的ATPG亚基对应区域具有较高的序列一致性。BdorATPG与拟暗果蝇Drosophila pseudoobscura ATPG亚基的氨基酸序列一致性最高, 为88.9%。三维结构模建结果表明, BdorATPG N端（第1~59位氨基酸）序列为α-螺旋结构, 亲水性和疏水性氨基酸在螺旋两侧呈对称分布。BdorATPG在不同组织中的荧光定量PCR分析表明, BdorATPG在各组织中都有表达, 其中在触角中的表达量最高; 在雄虫生殖节中的表达量是雌虫中的6.04倍。结果提示BdorATPG可能在雄虫生殖生理过程中发挥重要作用。     

Localization of subunit C (Vma5p) in the yeast vacuolar ATPase by immuno electron microscopy

Vacuolar ATPases (V1V0 -ATPases) function in proton translocation across lipid membranes of subcellular compartments. We have used antibody labeling and electron microscopy to define the position of subunit C in the vacuolar ATPase from yeast. The data show that subunit C is binding at the interface of the ATPase and proton channel, opposite from another stalk density previously identified as subunit H [Wilkens S., Inoue T., and Forgac M. (2004) Three-dimensional structure of the vacuolar ATPase - Localization of subunit H by difference imaging and chemical cross-linking. J. Biol. Chem. 279, 41942-41949]. A picture of the vacuolar ATPase stalk domain is emerging in which subunits C and H are positioned to play a role in reversible enzyme dissociation and activity silencing.     

Defective assembly of a hybrid vacuolar H(+)-ATPase containing the mouse testis-specific E1 isoform and yeast subunits

Mammalian vacuolar-type proton pumping ATPases (V-ATPases) are diverse multi-subunit proton pumps. They are formed from membrane V(o) and catalytic V(1) sectors, whose subunits have cell-specific or ubiquitous isoforms. Biochemical study of a unique V-ATPase is difficult because ones with different isoforms are present in the same cell. However, the properties of mouse isoforms can be studied using hybrid V-ATPases formed from the isoforms and other yeast subunits. As shown previously, mouse subunit E isoform E1 (testis-specific) or E2 (ubiquitous) can form active V-ATPases with other subunits of yeast, but E1/yeast hybrid V-ATPase is defective in proton transport at 37 degrees C (Sun-Wada, G.-H., Imai-Senga, Y., Yamamoto, A., Murata, Y., Hirata, T., Wada, Y., and Futai, M., 2002, J. Biol. Chem. 277, 18098-18105). In this study, we have analyzed the properties of E1/yeast hybrid V-ATPase to understand the role of the E subunit. The proton transport by the defective hybrid ATPase was reversibly recovered when incubation temperature of vacuoles or cells was shifted to 30 degrees C. Corresponding to the reversible defect of the hybrid V-ATPase, the V(o) subunit a epitope was exposed to the corresponding antibody at 37 degrees C, but became inaccessible at 30 degrees C. However, the V(1) sector was still associated with V(o) at 37 degrees C, as shown immunochemically. The control yeast V-ATPase was active at 37 degrees C, and its epitope was not accessible to the antibody. Glucose depletion, known to dissociate V(1) from V(o) in yeast, had only a slight effect on the hybrid at acidic pH. The domain between Lys26 and Val83 of E1, which contains eight residues not conserved between E1 and E2, was responsible for the unique properties of the hybrid. These results suggest that subunit E, especially its amino-terminal domain, plays a pertinent role in the assembly of V-ATPase subunits in vacuolar membranes.     

Probing conformations of the beta subunit of F0F1-ATP synthase in catalysis

A subcomplex of F0F1-ATP synthase (F0F1), alpha3beta3gamma, was shown to undergo the conformation(s) during ATP hydrolysis in which two of the three beta subunits have the "Closed" conformation simultaneously (CC conformation) [S.P. Tsunoda, E. Muneyuki, T. Amano, M. Yoshida, H. Noji, Cross-linking of two beta subunits in the closed conformation in F1-ATPase, J. Biol. Chem. 274 (1999) 5701-5706]. This was examined by the inter-subunit disulfide cross-linking between two mutant beta(I386C)s that was formed readily only when the enzyme was in the CC conformation. Here, we adopted the same method for the holoenzyme F0F1 from Bacillus PS3 and found that the CC conformation was generated during ATP hydrolysis but barely during ATP synthesis. The experiments using F0F1 with the epsilon subunit lacking C-terminal helices further suggest that this difference is related to dynamic nature of the epsilon subunit and that ATP synthesis is accelerated when it takes the pathway involving the CC conformation.     

Structure of the yeast vacuolar ATPase

The subunit architecture of the yeast vacuolar ATPase (V-ATPase) was analyzed by single particle transmission electron microscopy and electrospray ionization (ESI) tandem mass spectrometry. A three-dimensional model of the intact V-ATPase was calculated from two-dimensional projections of the complex at a resolution of 25 angstroms. Images of yeast V-ATPase decorated with monoclonal antibodies against subunits A, E, and G position subunit A within the pseudo-hexagonal arrangement in the V1, the N terminus of subunit G in the V1-V0 interface, and the C terminus of subunit E at the top of the V1 domain. ESI tandem mass spectrometry of yeast V1-ATPase showed that subunits E and G are most easily lost in collision-induced dissociation, consistent with a peripheral location of the subunits. An atomic model of the yeast V-ATPase was generated by fitting of the available x-ray crystal structures into the electron microscopy-derived electron density map. The resulting atomic model of the yeast vacuolar ATPase serves as a framework to help understand the role the peripheral stalk subunits are playing in the regulation of the ATP hydrolysis driven proton pumping activity of the vacuolar ATPase.