Chain length determination of small double- and single-stranded DNA molecules by polyacrylamide gel electrophoresis.

We describe the use of polyacrylamide gel electrophoresis to estimate chain lengths of double- and single-stranded DNA molecules in the size range 20-1000 base pairs (or nucleotides). Double-stranded DNA molecules of known length produced either by organic synthesis or by restriction endonuclease digestion of viral DNAs were used as standards. The relative electrophoretic mobilities of these standards were examined on both nondenaturing (aqueous) polyacrylamide gels and on denaturing gels containing 7 M urea or 98% formamide. Electrophoretic mobility of DNA is a linear function of the log of molecular weight if appropriate conditions are used, although exceptions are noted. Chain lengths can be conveniently estimated by using as standards bacteriophage gamma DNA restriction fragments or commercially available tracking dyes.     

Effect of ACTH on rabbit adrenal microsomal 17 alpha-hydroxylase activity, cytochrome P-450 and protein electrophoretic patterns

To determine whether a change in microsomal proteins can be correlated with adrenocorticotropic hormone (ACTH)-stimulation of rabbit adrenal 17 alpha-hydroxylase activity, rabbit adrenal microsomes were subjected to electrophoresis on polyacrylamide gels in the presence of sodium dodecylsulfate. Microsomes were obtained from rabbits stimulated with ACTH for 0, 2, 4, and 6 days. A protein band with a molecular weight of 53,000 was found to increase 31.1, 27.2 and 61.0 percent in 2-, 4-, and 6-day ACTH-stimulated microsomes as compared to controls; but 17 alpha-hydroxylase activity showed no apparent correlation, increasing 5-6 fold in all experiments. No new protein bands were found after ACTH stimulation, and no other changes in microsomal protein electrophoretic patterns after ACTH stimulation were found to correlate with the increases in 17 alpha-hydroxylase activity. The specific activity (nmol/mg protein) of cytochrome P-450 remained nearly the same throughout the stimulation periods. Tetramethylbenzidine staining for heme prosthetic groups on the electrophoretic gels displayed bands with molecular weights of 61,000, 58,000 and 53,000.     

Lectin-Reactive Components in White Matter Membranes from Normal and Multiple Sclerosis Brains

Abstract: Polypeptides derived from human white matter membranes reacted with the radioiodinated lectins concanavalin A, Lens culinaris phytohemagglutinin, Ricinus communis agglutinin and wheat germ agglutinin after electrophoresis in polyacrylamide pore gradient gels. The molecular weights of these lectin-reactive bands were estimated by comparison with radioiodinated protein standards by using the linear relationship between log of the molecular weight and log of the gel concentration reached by the protein after electrophoresis in a polyacrylamide gradient gel. The molecular weight estimates for components reactive with concanavalin A were 176,800, 141,200, 72,800, 52,800, 44,700, 40,000, 24,800 and 23,900. The molecular weights of the bands reactive with both wheat germ agglutinin and Lens culinaris phytohemagglutinin were 138,000, 113,500, 92,100, 52,800, 44,700, 24,800 and 23,900. Wheat germ agglutinin was bound also to a band with a molecular weight of 72,800. Ricinus communis agglutinin bound to bands with estimated molecular weights of 138,000, 72,800, 52,800, 44,700, 24,800 and 23,900. The electrophoretic pattern of lectin-reactive polypeptides derived from normal-appearing white matter of multiple sclerosis brains was not qualitatively different from the lectin-binding pattern of control brain membrane polypeptides.     

Proteins Specified by Herpes Simplex Virus XII. The Virion Polypeptides of Type 1 Strains

The polypeptides from purified virions of a herpes simplex 1 (human herpes-virus 1) strain, F1, which had been passaged a limited number of times in cell culture after isolation, formed 33 bands on electrophoretic separation in polyacrylamide gels cross-linked with N, N'-diallyltartardiamide in contrast to a maximum resolution of only 24 to 25 bands in gels cross-linked with N, N'-methylenebisacrylamide. This increase in the number of bands was due chiefly to an improved separation of glycosylated polypeptides from nonglycosylated polypeptides with which they co-electrophoresed on methylenebisacrylamide cross-linked gels. Purified virions of HSV-1 [F1] had a protein/DNA mass ratio of 10.7 +/- 0.96, and based on a DNA molecular mass of 85 x 10(6) to 100 x 10(6) the estimated weight of virion polypeptides ranges from 16.4 to 19.4 x 10(-16) g. The number of molecules of each polypeptide per virion ranged from less than 50 to 1,500. Comparison of the virion polypeptides of two HSV-1 strains with similar isolation and limited passage history with those of four HSV-1 strains with histories of numerous passages outside the human host showed a number of nonrandom variations in virion polypeptides. Thus, although the virion polypeptides of two strains with similar isolation and limited passage history could not be differentiated, strains with extended passage histories differed markedly from each other and from the limited passage strains in the number and electrophoretic mobility of noncapsid polypeptides and notably in those of the envelope.     

Visualization by chilling of protein bands in polyacrylamide gels containing 8 M urea: preparation and quantitation of foot-and-mouth disease virus capsid proteins

Protein bands become visible in polyacrylamide gels containing 8 m urea after chilling the gels in air for 5 to 10 min at ?70°C. Urea appears to crystallize preferentially as opaque bands in regions of the gel where protein reduces the amount of free water available as solvent for the urea molecules. Thus detected, the gel sections containing protein bands from foot-and-mouth disease virus can be immediately cut out, and their proteins obtained by electrophoretic elution or extraction procedures. Analysis of the proteins for purity and concentration is then carried out by electrophoresing measured aliquots on analytical gels, staining with Coomassie brilliant blue, scanning the gels for absorbance at 600 nm, and converting peak areas to micrograms of protein using Folin phenol standard curves determined for each purified capsid protein. The most basic capsid protein and its in virion proteolytic-cleavage products stain metachromatically.     

Separation of chromosomal DNA molecules from yeast by orthogonal-field-alternation gel electrophoresis

A simple agarose-gel apparatus has been developed that allows the separation of DNA molecules in the size range from 50 kb to well over 750 kb, the largest size for which size standards were available. The apparatus is based on the recent discovery that large DNA molecules are readily fractionated on agarose gels if they are alternately subjected to two approximately orthogonal electric fields. The switching time, which was on the order of 20-50 sec in our experiments, can be adjusted to optimize fractionation in a given size range. The resolution of the technique is sufficient to allow the fractionation of a sample of self-ligated lambda DNA into a ladder of approximately 15 bands, spaced at 50 kb intervals. We have applied the technique to the fractionation of yeast DNA into 11 distinct bands, several of which have been shown by DNA-DNA hybridization to hybridize uniquely to different chromosome-specific hybridization probes. In this paper, we describe the design of the apparatus, the electrophoretic protocol, and the sample-handling procedures that we have employed.     

Assessment of genetic variation in timothy (Phleum pratense L.) using RAPD and UP-PCR

DNA-based fingerprinting technologies including random amplified polymorphic DNA (RAPD) and universally primed PCR (UP-PCR), a novel method for studying genetic variation, were employed as genetic markers for assessing genetic diversity and relationships in timothy (Phleum pratense L.). This study sought to identify the genetic background of the genotypes used in timothy breeding. Thirty eight genotypes from fifteen countries were used as test materials. RAPD and UP-PCR dendrograms based on 132 (from 3 primers) and 44 highly reproducible bands, respectively, were analyzed. The electrophoretic gels showed that the PCR products were informative and polymorphic. Different geographic genotype groups were distinguished according to the combined RADP and UP-PCR results. The results demonstrate that methods based on molecular fingerprinting can be used for timothy identification.     

Resolving Power: A Quantitative Measure of Electrophoretic Resolution

Resolving power is a quantitative measure of the ability of an electrophoretic system to separate DNA (and other) molecules of similar size. It is a dimensionless quantity, and hence facilitates comparison of the performance of electrophoretic systems that operate very differently. Resolving power can be determined as a function of molecular length from experimental data consisting of a series of completely resolved bands on a gel or blot; closely spaced bands are not required. We discuss factors such as the mass of DNA in a particular band and the spatial resolution of the system used to image the distribution of DNA on a gel or blot that, while not an intrinsic part of the electrophoretic system, may influence the observed resolving power. We derive an empirical global dispersion function that applies both to images of gels obtained after a fixed time of electrophoresis of all the samples and to images obtained as each species reaches a detector located at a fixed distance from the starting well. We use this dispersion function to show that the improvement in resolving power produced by extending the time or distance of electrophoresis in a static, uniform electric field asymptotically approaches a limiting value that is a function of the length of the DNA. When plotted as a function of molecular length, this limiting value defines an envelope that characterizes the intrinsic limits of performance of a particular electrophoretic system (e.g., electric field strength, gel type and concentration, buffer, temperature). Comparing the resolving power of static field agarose gel electrophoresis as routinely practiced for separating DNA molecules from 10³ to 10⁵ bp long with other electrophoretic schemes suggests that significant improvements should be achievable.     

Comparative analysis of proteins from the fibrous sheath and outer dense fibers of rat spermatozoa

The protein composition of the fibrous sheath (FS) and the outer dense fibers (ODF), two cytoskeletal components of the tail of spermatozoa, was compared by using polyacrylamide gel electrophoresis and immunochemistry applied to Western blots and to spermatozoa. Isolated FS and ODF, the purity of which were verified by electron microscopy (EM), were denatured and either run on sodium dodecyl sulfate-polyacrylamide gels or used to raise antibodies. The gels revealed at least 18 and 14 polypeptide bands for the FS and ODF, respectively. The major bands of the FS had molecular masses of 75, 27.5, and 14.4 kDa, whereas the major bands of the ODF-connecting piece had molecular masses of 32-26, 20, 14.4, 84, and 80 kDa. Several prominent FS and ODF bands were found to comigrate on gels, and the 14.4 kDa polypeptides had similar electrophoretic properties. Anti-FS serum reacted with the majority of Western blot-transferred FS polypeptides, but also cross-reacted strongly with a major 14.4 kDa ODF polypeptide and with less affinity to other major ODF polypeptides. Anti-ODF serum reacted with the majority of ODF polypeptides, but also cross-reacted strongly with a major 14.4 kDa FS polypeptide, and with less affinity to several other FS polypeptides including the 75 kDa band. Antibodies affinity-purified from the 14.4 kDa FS polypeptide only cross-reacted with the 14.4 kDa ODF polypeptide, whereas antibodies purified from the 14.4 kDa ODF polypeptide cross-reacted with 14.4, 27.5, 57, and 63 kDa FS polypeptides. The immunocross-reactions observed on Western blots were confirmed by immunocytochemical methods applied to spermatozoa. This study demonstrates that the FS and ODF, both composed of many polypeptides, several having similar molecular weights, are related cytoskeletal structures as they have epitopes in common, and both contain 14.4 kDa polypeptides with common antigenic and electrophoretic properties.     

Visualization by chilling of protein bands in polyacrylamide gels containing 8 urea: Preparation and quantitation of foot-and-mouth disease virus capsid proteins

Protein bands become visible in polyacrylamide gels containing 8 urea after chilling the gels in air for 5 to 10 min at −70°C. Urea appears to crystallize preferentially as opaque bands in regions of the gel where protein reduces the amount of free water available as solvent for the urea molecules. Thus detected, the gel sections containing protein bands from foot-and-mouth disease virus can be immediately cut out, and their proteins obtained by electrophoretic elution or extraction procedures. Analysis of the proteins for purity and concentration is then carried out by electrophoresing measured aliquots on analytical gels, staining with Coomassie brilliant blue, scanning the gels for absorbance at 600 nm, and converting peak areas to micrograms of protein using Folin phenol standard curves determined for each purified capsid protein. The most basic capsid protein and its in virion proteolytic-cleavage products stain metachromatically.     

Substrate-containing gel electrophoresis: sensitive detection of amylolytic, nucleolytic, and proteolytic enzymes

Electrophoresis of hydrolytic enzymes under nondenaturing conditions on acrylamide gels containing the appropriate high-molecular-weight substrates entrapped on the gel has been explored as a general method for sensitive enzyme resolution and detection. Under electrophoresis conditions of optimal enzyme activity, the enzymes may bind tightly to the fixed substrate and can only migrate in the electrophoretic field as the substrate is hydrolyzed. When the gels after electrophoresis in this “binding mode” are stained with substrate-detecting reagents, clear tracks of enzyme migration are observed, and the length of each track is a function of the amount of enzyme present in that track. Multiple forms of a given enzyme activity have not been and are not likely to be observed under these conditions. Under electrophoresis conditions of minimal (or suboptimal) enzyme activity, the enzymes do not bind to the fixed substrate and their mobility in the electrophoretic field does not appear to be significantly affected by the presence of substrate. After electrophoresis in this “nonbinding mode” the gels are incubated under conditions of optimal enzyme activity to allow substrate hydrolysis to take place before they are stained with substrate-detecting reagents, and active enzymes are detected as clear bands. Multiple forms of a given activity which were resolved during electrophoresis in the nonbinding mode are reflected by the presence of individual bands. The substrate-containing gel electrophoresis technique does not appear to be amenable to precise quantification of enzymes. By comparing the length of the clear tracks or the degree of staining of the activity bands for a range of enzyme concentrations, however, it is possible to establish the smallest amount of enzyme that can unequivocally be detected under a given set of conditions; from such studies we estimate that the sensitivity of detection with the substrate-containing gel electrophoresis technique can be orders of magnitude better than that obtained with other methods. The levels of detection observed in the work presented here were about 50 pg for α-amylase run on starch-containing gels, 1 pg to 1 ng for nucleases run on DNA- or RNA-containing gels, and 100 pg to 10 ng for 11 different pure and crude protease preparations run on gels containing heat-denatured bovine serum albumin.     

A simplified electrophoretic system for determining molecular weights of proteins.

Electrophoresis of 31 different proteins in commercially prepared polyacrylamide gradient gels, Gradipore, yields a linear relationship between a hypothetical limiting pore size (the reciprocal of a limiting gel concentration, GL) and the cube root of the mol.wt., over the range 13 500-9000 000. A regression analysis of these data reveals that 98.6% of all variability in 1/GL is explained by the molecular weight, and this degree of accuracy compares favourably with existing methods for the determination of molecular weight by retardation of mobility in polyacrylamide. This new procedure has the additional advantages that molecular-weight standards can be obtained from readily available body fluids or tissue extracts by localizing enzymes and other proteins by standard histochemical methods, and that the same electrophoretic system can be used in determining molecular weights as is used in routine surveys of populations for individual and species variation in protein heterogeneity.     

The ‘Densitometric Image Analysis Software’ and Its Application to Determine Stepwise Equilibrium Constants from Electrophoretic Mobility Shift Assays

Current software applications for densitometric analysis, such as ImageJ, QuantityOne (BioRad) and the Intelligent or Advanced Quantifier (Bio Image) do not allow to take the non-linearity of autoradiographic films into account during calibration. As a consequence, quantification of autoradiographs is often regarded as problematic, and phosphorimaging is the preferred alternative. However, the non-linear behaviour of autoradiographs can be described mathematically, so it can be accounted for. Therefore, the ‘Densitometric Image Analysis Software’ has been developed, which allows to quantify electrophoretic bands in autoradiographs, as well as in gels and phosphorimages, while providing optimized band selection support to the user. Moreover, the program can determine protein-DNA binding constants from Electrophoretic Mobility Shift Assays (EMSAs). For this purpose, the software calculates a chosen stepwise equilibrium constant for each migration lane within the EMSA, and estimates the errors due to non-uniformity of the background noise, smear caused by complex dissociation or denaturation of double-stranded DNA, and technical errors such as pipetting inaccuracies. Thereby, the program helps the user to optimize experimental parameters and to choose the best lanes for estimating an average equilibrium constant. This process can reduce the inaccuracy of equilibrium constants from the usual factor of 2 to about 20%, which is particularly useful when determining position weight matrices and cooperative binding constants to predict genomic binding sites. The MATLAB source code, platform-dependent software and installation instructions are available via the website http://micr.vub.ac.be.     

Purification of rabbit and human serum paraoxonase.

Rabbit serum paraoxonase/arylesterase has been purified to homogeneity by Cibacron Blue-agarose chromatography, gel filtration, DEAE-Trisacryl M chromatography, and preparative SDS gel electrophoresis. Renaturation (Copeland et al., 1982) and activity staining of the enzyme resolved by SDS gel electrophoresis allowed for identification and purification of paraoxonase. Two bands of active enzyme were purified by this procedure (35,000 and 38,000). Enzyme electroeluted from the preparative gels was reanalyzed by analytical SDS gel electrophoresis, and two higher molecular weight bands (43,000 and 48,000) were observed in addition to the original bands. This suggested that repeat electrophoresis resulted in an unfolding or other modification and slower migration of some of the purified protein. The lower mobility bands stained weakly for paraoxonase activity in preparative gels. Bands of each molecular weight species were electroblotted onto PVDF membranes and sequenced. The gas-phase sequence analysis showed that both the active bands and apparent molecular weight bands had identical amino-terminal sequences. Amino acid analysis of the four electrophoretic components from PVDF membranes also indicated compositional similarity. The amino-terminal sequences are typical of the leader sequences of secreted proteins. Human serum paraoxonase was purified by a similar procedure, and ten residues of the amino terminus were sequenced by gas-phase procedures. One amino acid difference between the first ten residues of human and rabbit was observed.     

Spatial normalization of one-dimensional electrophoretic gel images

A strategy for using processed, digitized images of one-dimensional electrophoretic gels to facilitate the analysis of large sets of overlapping clones is described. The images are acquired from fluorescently stained gels or from transilluminated gel photographs using a cooled, solid-state charge-coupled device camera. By employing sets of bands in the size-standard lanes as reference points, all the gel images are spatially normalized to a common reference template. After normalization, lane images from different gels can be compared as though the gels had been electrophoresed under identical, uniform-field conditions. Applications of this procedure to the analysis of a large set of overlapping lambda clones from chromosome VII of Saccharomyces cerevisiae and to the estimation of fragment sizes are illustrated.     

The relationship of molecular weight to electrophoretic mobility of fluorescamine-labeled proteins in polyacrylamide gels

Proteins of known molecular weights were labeled with fluorescamine and then subjected to electrophoresis through polyacrylamide gels. The electrophoretic mobilities of the fluorescamine-labeled proteins were dependent upon their respective molecular weights over a range of 17,000 to 70,000 daltons. The correlation of electrophoretic mobility of fluorescamine-labeled protein to molecular weight was similar to results obtained in sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The speed with which data can be obtained with the described procedure is a definite advantage over currently employed procedures. These findings encourage the use of fluorescamine for rapid, sensitive determinations of molecular weights of proteins in polyacrylamide gels.     

Specialized software product for comparative analysis of multicomponent DNA fingerprints

GelAnalyzer software, which is used to identify and correctly compare DNA fingerprints consisting of a large number of discrete bands, has been developed by the project to study the quantitative changes in DNA polymorphism patterns in animals and humans exposed to gamma radiation. The actual capabilities of this program are much broader and include the possibility to analyze the images of any multicomponent gels containing fragments of DNA, RNA, and proteins. This software product runs on Windows. GelAnalyzer allows one to analyze gel images obtained by a scanner, camera, or digital camera and ensures the visual control of the identification and comparative analysis of bands; it also makes it possible to take into account the bands that are poorly identified automatically and exclude the artifacts (incidental marks) on images. The operation of GelAnalyzer software is based on the determination of the values of normalized coordinates of bands with allowance for the relative electrophoretic mobility (Rf) of PCR products and comparison of their spectra (set of bands in gel lanes) to reveal the similarities or differences in their components with subsequent statistical data processing and display the results of the analysis.     

Specific dimerization of the light chains of human immunoglobulin

1. The light chains of human immunoglobulin were allowed to dimerize in vitro on removal of the dispersing agents acetic acid or urea. 2. On electrophoresis in polyacrylamide gel at pH8.8 the dimers yielded up to nine regularly spaced bands. This approximates to the number of electrophoretic components known to occur among the monomers. 3. Single electrophoretic components of the dimers were isolated from the gel, dissociated into monomers, and subjected as such to electrophoresis in urea-containing gels. Each gave two adjacent bands. 4. Similarly, after all the light chains as monomers had been subjected to electrophoresis in urea-containing gels, single electrophoretic components were isolated and allowed to dimerize. When examined now as dimers in the absence of urea, each component gave two adjacent bands. 5. These findings are explicable on the following basis. (a) The dimerization of the light chains is specific, at least inasmuch as it occurs between monomers of the same electrophoretic mobilities. (b) With the buffer constant, different light chains undergo different changes in net charge on being transferred from urea-containing to urea-free solution; in this way two different chains of the same initial charge can acquire a charge difference of 1. 6. Experiments with Bence-Jones proteins and other homogeneous light chains gave results substantiating the conclusions (a) and (b).     

Fat body: a site of hemoglobin synthesis in Chironomus thummi (diptera)

Fourth instar larvae of Chironomus thummi were permitted to incorporate labeled amino acids and/or sigma-aminolevulinic acid (sigma-ALA) in vivo and in organ culture. The products secreted into the hemolymph or into the culture medium were examined by acrylamide gel electrophoresis. Nine electrophoretic bands can be resolved as hemoglobins without staining. When gels are sliced for scintillation counting, incorporated amino acids and sigma-ALA are shown to be associated primarily with the same nine hemoglobin bands, suggesting that hemoglobins are assembled and secreted. Staining of gels with Coomassie brilliant blue reveals that there are several bands in addition to the visible hemoglobins. These bands incorporate amino acids, but not sigma-ALA, suggesting that they are non-heme proteins. The results of culturing isolated salivary glands, gut, and fat body demonstrate that the fat body is the major site of hemoglobin synthesis and secretion. Labeled products of the gut represent about 5% of the total hemoglobins produced by the tissues, while no hemoglobins are produced by the salivary glands. Although nine hemoglobins are visibly resolved on gels, labeling techniques reveal as many as 14 hemoglobins. This is the first demonstration of hemoglobin synthesis by specific tissues in culture in an invertebrate.     

The use of agarose wedge-gel electrophoresis for resolving both small and large naturally occurring plasmids

A wedge-shaped, horizontal agarose gel gave better electrophoretic resolution of both large and small plasmids than conventional linear gels. The wedge-gel increased mobility and separation of the larger plasmids whilst retarding the mobility of the smaller plasmids and tightening the bands. The linearity of the relationship between log₁₀ molecular size and log₁₀ relative mobility, for a range of plasmids from 2.1 to 221 kb, was increased. Therefore, estimations of plasmid sizes are more accurate using a wedge-gel than with conventional gels.