Immobilization of papain on cotton fabric by sol–gel method

A method has been developed to immobilize papain on cotton fabric by means of sol–gel technique. The activity of free papain and papain in silica sol under sonication was studied. Scanning electron microscopy, energy dispersive spectrometer and the Bradford method were used to characterize papain immobilization. The efficiency of the immobilization was investigated by examining the relative enzymatic activity of free and immobilized papain, respectively. The results show that the optimum pH value in the medium for immobilized papain is shifted to alkaline side. In addition, the adaptability of papain to environmental acidity is significantly increased. The thermostability of immobilized papain shows no significant change compared to the free enzyme. The papain immobilized on fabric by sol–gel technique retains more than 30% of the original activity after six reuses continuously.     

Influence of ionic liquids as additives on sol–gel immobilized lipase

The immobilization of lipase from Candida rugosa, using ionic liquids as additives to protect the inactivation of lipase by released alcohol and shrinking of gel during sol–gel process, was investigated. The influence of various factors, such as structure of ionic liquids, content of ionic liquids and types of precursor in the sol–gel process on the activity and stability of immobilized lipase was also studied. The highest hydrolytic activity of immobilized lipase was obtained when the hydrophilic ionic liquid, [C₂mim][BF₄], was used as an additive, while the highest stability of immobilized lipase was obtained by using hydrophobic ionic liquid, [C₁₆mim][Tf₂N]. Therefore, the binary mixtures of these ionic liquids as additives were used to obtain the optimal immobilized lipase, which shows both high activity and stability. The hydrolysis and esterification activities of lipase co-immobilized with the mixture of 1:1 at molar ratio of [C₂mim][BF₄] and [C₁₆mim][Tf₂N] were 10-fold and 14-fold greater than in silica gel without ionic liquids (ILs), respectively. After 5 days incubation of this immobilized lipase in n-hexane at 50 °C, 84% of initial activity was remained, while the residual activity of the lipase immobilized without ILs was 28%.     

Immobilization of enzymes on porous silica supports

Four silica supports differing in pore dimensions were activated by treatment with SiCl₄ and then with ethylenediamine to obtain alkylamine groups on the silica surface. Three enzymes, peroxidase from cabbage, glucoamylase from Aspergillus niger C and urease from soybean were immobilized on these supports using glutaraldehyde as coupling agent. It was found that the protein content, the retained enzymatic activity and the storage stability of the silica supported enzymes were considerably affected by support pore size and enzyme molecular weight, the factors which are supposed to alter protein distribution inside the support pores. The highest activity was found for peroxidase and glucoamylase attached to the silica with the widest pores, but their loss in activity during storage was considerable. The urease retained less activity after immobilization, but its storage stability was excellent.     

Activity and storage stability of immobilized glucose oxidase onto magnesium silicate

Glucose oxidase (GOD) was covalently immobilized onto florisil (magnesium silicate) carrier via glutaraldehyde. Immobilization conditions were optimized: the amount of initial GOD per grams of carrier as 5 mg, pH as 5.5, immobilization time as 120 min and temperature as 10 °C. Under the optimized reaction conditions activities of free and immobilized GOD were measured. Free and immobilized GOD samples were characterized with their kinetic parameters, and thermal and storage stabilities. K_M and V_max values were 68.2 mM and 435 U mg GOD⁻¹ for free and 259 mM and 217 U mg GOD⁻¹ for immobilized enzymes, respectively. Operational stability of the immobilized enzyme was also determined by using a stirred batch type column reactor. Immobilized GOD was retained 40% of its initial activity after 50 reuses. Storage stabilities of the immobilized GOD samples stored in the mediums with different relative humidity in the range of 0–100% were investigated during 2 months. The highest storage stability was determined for the samples stored in the medium of 60% relative humidity. Increased relative humidity from 0% to 60% caused increased storage stability of immobilized GODs, however, further increase in relative humidity from 80% to 100% caused a significant decrease in storage stability of samples.     

Polyaniline as a support for urease immobilization

Polyaniline synthesized by chemical oxidative polymerization was used as an immobilization support for jack bean urease. Such immobilized enzyme has a good catalytic activity, storage stability, and reusability. Properties of free and immobilized urease were compared. Blends of polystyrene, cellulose acetate and poly(methyl methacrylate) with polyaniline were used for urease immobilization as well.     

Modification and characterization of cellulosic cotton fibers for efficient immobilization of urease

Cotton fibers were first grafted by polyacrylonitril in the presence of KMnO(4) and oxalic acid as a combined redox initiator. Moreover, modification of the grafted cotton fibers was done by changing the nitrile group (-CN) into hydrazidine group through the reaction with hydrazine hydrate, then the fibers were activated by glutaraldehyde to introduce free aldehyde groups which were able to react with amino groups of urease to form Schiff's base, and result in cotton fibers immobilized urease. The efficiency of the immobilization was evaluated by examining the relative enzymatic activity of enzyme before and after the immobilization of urease. The results showed that the optimum temperature of immobilized urease was 35°C, which was higher than that of the free enzyme (30°C), and the immobilized urease exhibited a higher relative activity than that of free urease over 35°C. The optimal pH for immobilized urease was 6.5, which was lower than that of the free urease (pH 7.0), and the immobilization resulted in stabilization of enzyme over a wider pH range. The kinetic constant value (K(m)) of immobilized urease was higher than that of the free urease. However, the thermal and operational stabilities of immobilized urease have been improved greatly.     

Preparation and characterization of kappa-carrageenan immobilized urease

Urease was encapsulated within kappa-carrageenan beads. Various parameters, such as amount of kappa-carrageenan and enzyme activity, were optimized for the immobilization of urease. Immobilized urease was thoroughly characterized for pH, temperature, and storage stabilities and these properties were compared with the free enzyme. The free urease activity quickly decreased and the half time of the activity decay was about 3 days at 4 degrees C. The immobilized urease remained very active over a long period of time and this enzyme lost about 70.43% of its orginal activity over the period of 26 days for storage at 4 degrees C. The Michaelis constant (Km) and maximum reaction velocity (Vmax) were calculated from Lineweaver-Burk plots for both free and immobilized enzyme systems. Vmax = 227.3 U/mg protein, Km = 65.6 mM for free urease and Vmax = 153.9 U/mg protein, Km = 96.42 mM for immobilized urease showed a moderate decrease of enzyme specific activity and change of substrate affinity.     

Optimization of urease immobilization onto non-porous HEMA incorporated poly(EGDMA) microbeads and estimation of kinetic parameters.

Jack bean urease (urea aminohydrolase, EC 3.5.1.5) was immobilized onto modified non-porous poly(ethylene glycol dimethacrylate/2-hydroxy ethylene methacrylate), (poly(EGDMA/HEMA)), microbeads prepared by suspension copolymerization for the potential use in hemoperfusion columns, not previously reported. The conditions of immobilization; enzyme concentration, medium pH, substrate and ethylene diamine tetra acetic acid (EDTA) presence in the immobilization medium in different concentrations, enzyme loading ratio, processing time and immobilization temperature were investigated for highest apparent activity. Immobilized enzyme retained 73% of its original activity for 75 days of repeated use with a deactivation constant kd = 3.72 x 10(-3) day(-1). A canned non-linear regression program was used to estimate the intrinsic kinetic parameters of immobilized enzyme with a low value of observable Thiele modulus (phi < 0.3) and these parameters were compared with those of free urease. The best-fit kinetic parameters of a Michaelis-Menten model were estimated as Vm = 3.318 x 10(-4) micromol/s mg bound enzyme protein, Km = 15.94 mM for immobilized, and Vm = 1.074 micromol NH3/s mg enzyme protein, Km = 14.49 mM for free urease. The drastic decrease in Vm value was attributed to steric effects, conformational changes in enzyme structure or denaturation of the enzyme during immobilization. Nevertheless, the change in Km value was insignificant for the unchanged affinity of the substrate with immobilization. For higher immobilized urease activity, smaller particle size and concentrated urease with higher specific activity could be used in the immobilization process.     

Porous zirconia: a new support material for enzyme immobilization

Four different proteases (trypsin, chymotrypsin, papain and pepsin) were covalently attached to the surface of a new type of porous zirconia, as well as a conventional porous silica, activated with 3-isothiocyanatopropyltriethoxy silane (NCS-silane). The immobilization efficiency onto the porous zirconia material was evaluated in terms of the amount of enzyme attached to the particles and from the biological activity remaining after the immobilization step. The results were compared with the corresponding experiments with a porous silica of similar surface area/g support material. In addition, the storage stability of the modified zirconia and silica biocatalysts were evaluated. These results indicated that specific immobilized enzyme biocatalysts can be achieved with this new zirconia support material which exhibits different properties to those observed with the more conventional silica-based materials. Moreover, the results with the enzyme-zirconia biocatalysts also indicate different characteristics when compared with data for the same enzymes immobilized under similar buffer conditions to organic support materials as previously described by various other investigators. The advantages of zirconia-based immobilized enzyme biocatalysts in terms of their density and chemical robustness are also described relative to other alternative support materials currently in use.     

Efficient immobilization of lipases by entrapment in hydrophobic sol-gel materials

The commercial application of lipases as biocatalysts for organic synthesis requires simple but efficient methods to immobilize the enzyme, yielding highly stable and active biocatalysts which are easy to recover. In this study, we present a novel method to achieve lipase immobilization by entrapment in chemically inert hydrophobic silica gels which are prepared by hydrolysis of alkyl-substituted silanes in the presence of the enzyme. A typical immobilization procedure uses: an aqueous solution of lipase; sodium fluoride as a catalyst; and additives like polyvinyl alcohol or proteins and alkoxysilane derivatives like RSi-(OMe)(3) with R = alkyl, aryl, or alkoxy as gel precursors. The effect of various immobilization parameters like stoichiometric ratio of water, silane, type and amount of additive, type and amount of catalyst, and type of silane has been carefully studied. The new method is applicable for a wide variety of lipases, yielding immobilized lipases with esterification activities enhanced by a factor of up to 88, compared to the commercial enzyme powders under identical conditions. Studies on the stability of sol-gel immobilized lipases under reaction conditions or storage (dry, in aqueous or organic medium) revealed an excellent retention of enzymatic activity. The possible reasons for the increased enzyme activities are discussed. (c) 1996 John Wiley & Sons, Inc.     

Preparation and characterization of urease immobilized onto porous chitosan beads for urea hydrolysis

Urease was covalently immobilized onto porous chitosan beads via primary amine groups connected to the backbone via a six-carbon linear alkyl spacer. The optimum conditions for enzyme immobilization are activating the beads with 1%(w/w) glutaraldehyde, reacting the activated beads in pH 7 buffer with the enzyme, using an enzyme to bead weight ratio of 25, and without lyophilization. Chitosan-bound urease was found to fully retain its specific activity. Properties of the immobilized urease were characterized under batch and flow conditions. Increased optimum reaction temperature, enhanced thermal stability and storage stability, and excellent reusability were found after enzyme immobilization. Continuous hydrolysis of urea solution was studied in a column packed with the enzyme-containing beads for its possible application in regenerating dialysate solution during hemodialysis.     

Immobilization of invertase onto poly(3-methylthienyl methacrylate)/poly(3-thiopheneacetic acid) matrix

A novel immobilization matrix, poly(3-methylthienyl methacrylate)–poly(3-thiopheneacetic acid) (PMTM–PTAA), was synthesized and used for the covalent immobilization of Saccharomyces cerevisiae invertase to produce invert sugar. The immobilization resulted in 87% immobilization efficiency. Optimum conditions for activity were not affected by immobilization and the optimum pH and temperature for both free and immobilized enzyme were found to be 4.5 and 55 °C, respectively. However, immobilized invertase was more stable at high pH and temperatures. The kinetic parameters for free and immobilized invertase were also determined using the Lineweaver–Burk plot. The K_m values were 35 and 38 mM for free and immobilized enzyme, respectively. The V_max values were 29 and 24 mg glucose/mg enzyme min for free and immobilized enzyme, respectively. Immobilized enzyme could be used for the production of glucose and fructose from sucrose since it retained almost all the initial activity for a month in storage and retained the whole activity in repeated 50 batch reactions.     

Invertase reversibly immobilized onto polyethylenimine-grafted poly(GMA–MMA) beads for sucrose hydrolysis

The epoxy group containing poly(glycidyl methacrylate-co-methylmethacrylate) poly(GMA–MMA) beads were prepared by suspension polymerisation and the beads surface were grafted with polyethylenimine (PEI). The PEI-grafted beads were then used for invertase immobilization via adsorption. The immobilization of enzyme onto the poly(GMA–MMA)–PEI beads from aqueous solutions containing different amounts of invertase at different pH was investigated in a batch system. The maximum invertase immobilization capacity of the poly(GMA–MMA)–PEI beads was about 52 mg/g. It was shown that the relative activity of immobilized invertase was higher then that of the free enzyme over broader pH and temperature ranges. The Michaelis constant (K_m) and the maximum rate of reaction (V_max) were calculated from the Lineweaver–Burk plot. The K_m and V_max values of the immobilized invertase were larger than those of the free enzyme. The immobilized enzyme had a long-storage stability (only 6% activity decrease in 2 months) when the immobilized enzyme preparation was dried and stored at 4 °C while under wet condition 43% activity decrease was observed in the same period. After inactivation of enzyme, the poly(GMA–MMA)–PEI beads can be easily regenerated and reloaded with the enzyme for repeated use.     

Covalent immobilization of a hydroperoxide lyase from mung beans (Phaseolus radiatus L.)

A fatty acid hydroperoxide lyase of mung beans has been covalently immobilized on different commercially available gels which represents the first immobilization of this type of enzyme from a higher plant. UltraLink Iodoacetyl possessed optimum coupling properties and yielded a maximum activity of 1.3 U ml–1 gel and a yield of 84%. The effect of various protective reagents (e.g. thiols, antioxidants) and of the substrate concentration on the re-usability of the immobilized enzyme was investigated. Compared to a control, the relative activity during re-use was enhanced 1.8- to 2.3-fold in the presence of dithiothreitol. As the hydroperoxide lyase was irreversibly inhibited by the substrate, its re-usability depended strongly on the hydroperoxide concentration. The lowest inactivation was with 55 M hydroperoxide which resulted in a relative activity of 73% after the third cycle. The storage stability of the hydroperoxide lyase was significantly improved by immobilization and resulted in a relative activity of 86% after 18 days, whereas the soluble enzyme lost 68% of its initial activity. © Rapid Science Ltd. 1998     

Characterization of sol–gel encapsulated lipase using tetraethoxysilane as precursor

Lipase from Candida rugosa was encapsulated within a chemically inert sol–gel support prepared by polycondensation of the precursor tetraethoxysilane (TEOS) in the presence of polyethylene glycol (PEG) as additive. The properties of silica and their derivatives with regard to mean pore diameter, specific surface area, mean pore size, weight loss upon heating (thermogravimetric analysis, TGA) and ²⁹Si and ¹³C NMR are reported. The pH optimum shifted from 7.8 to 6.7 and optimum temperature jumped from 36 to 60 °C upon enzyme encapsulation. Encapsulated lipase in presence of PEG (EN-PEG) exhibited higher stability in the range of 37–45 °C, but from 50 to 65 °C the EN-PEG was inactivated after seven cycles. Hydrolytic activity during long-term storage at room temperature decreased to 50% after 94 days. High diffusional resistance was observed for large oil concentration reducing hydrolytic effectiveness by 60% in the case of the encapsulated lipase. NMR, pore size and specific surface area data suggested an active participation of the lipase enzyme during gelling of the silica matrix. This lead to reduction of available Si–OH groups, larger pores and smaller surface area. Larger pores increase substrate diffusion that correlates well with higher hydrolytic activity of the TEOS–PEG sol–gel matrix encapsulated enzyme in comparison with other sol–gel supports.     

Stabilization of native and immobilized urease

The stability of native and immobilized urease isolated from Staphylococcus saprophyticus was studied at 4 degrees and 25 degrees C. The activity yield was 20% and 1.4% on the enzyme immobilization in albumin gel and latex membrane, respectively. Inactivation of native microbial urease proceeded 10 times slower in the solution containing 1 mM EDTA and 30 mM sodium sulfite. This solution contributed to a great extent to stabilization of immobilized urease both during storage in the phosphate buffer solution and in case of lyophilization.     

Immobilization of urease by using chitosan–alginate and poly(acrylamide-co-acrylic acid)/κ-carrageenan supports

Jack bean urease (urea aminohydrolase, E.C. 3.5.1.5) was entrapped into chitosan–alginate polyelectrolyte complexes (C-A PEC) and poly(acrylamide-co-acrylic acid)/κ-carrageenan (P(AAm-co-AA)/carrageenan) hydrogels for the potential use in immobilization of urease, not previously reported. The effects of pH, temperature, storage stability, reuse number, and thermal stability on the free and immobilized urease were examined. For the free and immobilized urease into C-A PEC and P(AAm-co-AA)/carrageenan, the optimum pH was found to be 7.5 and 8, respectively. The optimum temperature of the free and immobilized enzymes was also observed to be 55 and 60 °C, respectively. Michaelis–Menten constant (K _m) values for both immobilized urease were also observed smaller than free enzyme. The storage stability values of immobilized enzyme systems were observed as 48 and 70%, respectively, after 70 days. In addition to this, it was observed that, after 20th use in 5 days, the retained activities for immobilized enzyme into C-A PEC and P(AAm-co-AA)/carrageenan matrixes were found as 55 and 89%, respectively. Thermal stability of the free urease was also increased by a result of immobilization.     

High throughput covalent immobilization process for improvement of shelf-life,operational cycles,relative activity in organic media and enzymatic kinetics of urease and its application for urea removal from water samples

High throughput covalent urease immobilization was performed through the amide bond formation between the urease and the amino-functional MNPs. The enzyme’s performances, including shelf-life, reusability, enzymatic kinetics, and the enzyme relative activity in organic media was improved. At optimal conditions, the immobilization efficiency was calculated about 95.0% with keeping 94.7% of the urease initial specific activity. The optimal pH for maximum activity of the free and immobilized urease was calculated as 7.0 at 37.0 °C and 8.0 at 60.0 °C, respectively. The kinetics studies showed the K_m of 26.0 mM and 8.0 mM and the V_max of 5.31 μmol mg⁻¹ min⁻¹ and 3.93 μmol mg⁻¹ min⁻¹ for the free and immobilized urease, respectively. The ratio K_cat/K_m as a measure of catalytic efficiency and enzyme specificity was calculated as 0.09 mg mL⁻¹ min⁻¹ and 0.22 mg mL⁻¹ min⁻¹ for the free and immobilized urease, respectively, indicating an improvement in the enzymatic kinetics. The shelf-life and operational studies of immobilized urease indicated that approximately 97.7% and 88.5% of its initial activity was retained after 40 days and 17 operational cycles, respectively. The immobilized urease was utilized to urea removal from water samples with an efficiency between 91.5–95.0%.     

Urease Immobilization on Arylamine Glass Beads and its Characterization

Jack bean urease has been immobilized on arylamine glass beads (200–400 mesh size, 75–100 Å pore size) and its properties compared with soluble enzyme. The binding of urease was 13.71 mg per gram beads. The K_m for soluble and immobilized urease for urea was 4.20 mM and 8.81 mM, respectively. V_max values of urease decreased from 200 to 43.48 μmol of ammonia formed per min per mg protein at 37°C on immobilization. Both pH and buffer ions influenced the activities of soluble as well as immobilized urease. Soluble urease exhibited pH optima at 5.5 and 8.0. However, immobilized urease showed one additional pH optimum at 6.5. In comparison to phosphate buffer, citrate buffer was inhibitory to urease activity. Immobilization of urease on arylamine glass beads resulted in improved thermal, storage and operational stability. Because of inertness of support and stability of immobilized urease, the preparation can find applications in ‘artificial kidney’ and urea estimation in biological fluids viz., blood, milk etc.     

Fabrication of an organic–inorganic nanocomposite carrier for enzyme immobilization based on metal–organic coordination

An organic–inorganic nanocomposite which combined mesoporous silica SBA-15 and chitosan using a carboxyl functionalized ionic liquid as the bridging agent (SBA@CS) was successfully fabricated, and was used to immobilize porcine pancreas lipase (PPL) by physical adsorption, cross-linking and metal–organic coordination, respectively. The as-prepared carriers were characterized by scanning electron microscopy, Fourier transform infrared and energy-dispersive X-ray spectroscopy. Compared with immobilization onto the pure mesoporous silicon material SBA-15, all the batches of PPL immobilized onto organic–inorganic nanocomposites showed higher activity, improved stability and reusability as well as better resistance to pH and temperature changes. Among the immobilized PPLs, immobilization based on Co²⁺ coordination (SBA@CS-Co-PPL) produced the best enzymatic properties. The maximum immobilization efficiency and specific activity of 79.6% and 1975.8 U g⁻¹ were obtained with SBA@CS-Co, separately. More importantly, the activity of immobilized enzyme can still maintain 84.0% after 10 times of reuse. These results demonstrated that thus prepared organic–inorganic nanocomposite could be an ideal carrier for enzyme immobilization by metal–organic coordination.