Effects of heavy metals on the Ca2+-ATPase activity present in gill cell plasma-membrane of mussels (Mytilus galloprovincialis Lam.)

1. Heavy metals (Hg²⁺, Cu²⁺, Cd²⁺, Zn²⁺, Pb²⁺) at micromolar concentrations strongly inhibit the Ca²⁺-ATPase activity present in the plasma-membrane obtained from the gill cells of Mytilus galloprovincialis Lam. Heavy metals act through inhibition of the formation of the phosphorylated intermediate.2. All the heavy metals tested inhibit the Ca²⁺-ATPase activity, the effect following the order: Hg²⁺ > Pb²⁺ > Cu²⁺ > Cd²⁺ > Zn²⁺; the simultaneous addition of different heavy metals causes a summatory inhibition of the enzyme activity; addition to the reaction mixture of GSH at a final concentration of 0.5 mM, reverses inhibitory effects of heavy metals.3. The inhibitory effects of Cu²⁺ on Ca²⁺-ATPase are highly enhanced by addition of ascorbate to the reaction mixture. In the presence of ascorbate (100 μM), copper strongly stimulates the lipid peroxidation damage of the gill plasma-membranes, a result that may explain the high copper cytotoxicity.     

Removing heavy metals from synthetic effluents using “kamikaze” Saccharomyces cerevisiae cells

One key step of the bioremediation processes designed to clean up heavy metal contaminated environments is growing resistant cells that accumulate the heavy metals to ensure better removal through a combination of biosorption and continuous metabolic uptake after physical adsorption. Saccharomyces cerevisiae cells can easily act as cation biosorbents, but isolation of mutants that are both hyperaccumulating and tolerant to heavy metals proved extremely difficult. Instead, mutants that are hypersensitive to heavy metals due to increased and continuous uptake from the environment were considered, aiming to use such mutants to reduce the heavy metal content of contaminated waters. In this study, the heavy metal hypersensitive yeast strain pmr1∆ was investigated for the ability to remove Mn²⁺, Cu²⁺, Co²⁺, or Cd²⁺ from synthetic effluents. Due to increased metal accumulation, the mutant strain was more efficient than the wild-type in removing Mn²⁺, Cu²⁺, or Co²⁺ from synthetic effluents containing 1–2 mM cations, with a selectivity $ {\text{Mn}}^{{{\text{2}} + }} > {\text{Co}}^{{{\text{2}} + }} ~ > {\text{Cu}}^{{{\text{2}} + }} $ {\text{Mn}}^{{{\text{2}} + }} > {\text{Co}}^{{{\text{2}} + }} ~ > {\text{Cu}}^{{{\text{2}} + }} and also in removing Mn²⁺ and Cd²⁺ from synthetic effluents containing 20–50 μM cations, with a selectivity Mn²⁺ > Cd²⁺.     

Bioaccumulation of metal cations by Saccharomyces cerevisiae

Yeast cells are capable of accumulation of various heavy metals, preferentially accumulating those of potential toxicity and also those of value. They retain their ability to accumulate heavy metals under a wide range of ambient conditions. In the present study it was shown that yeast cells in suspension accumulate heavy metal cations such as Cu²⁺, Co²⁺. The level of copper accumulation was dependent on the ambient metal concentration and was markedly inhibited by extremes of ambient pH. Temperature (5–40°C) and the presence of the alkali metal sodium had much smaller effects on the level of copper accumulation. This suggests that in waste-waters of pH 5.0–9.0, yeast biomass could provide an effective bioaccumlator for removal and/or recovery of the metal. During bioaccumulation and subsequent processes it is necessary to retain the biomass. It was shown in the present study that this could be achieved by cell immobilization. Immobilization allowed for complete removal of Cu²⁺, Co²⁺, and Cd²⁺ from synthetic metal solutions. The immobilized material could be freed of metals by use of the chelating agent ethylenediamine tetraacetic acid (EDTA) and recycled for further bioaccumulation events with little loss of accumulation capacity.Correspondence to: J. R. Duncan     

Biosorption with Algae: A Statistical Review

ABSTRACT

The state of the art in the field of biosorption using algae as biomass is reviewed. The available data of maximum sorption uptake (q_max) and biomass-metal affinity (b) for Cd^{2 +}, Cu^{2 +}, Ni^{2 +}, Pb^{2 +} and Zn^{2 +} were statistically analyzed using 37 different algae (20 brown algae, 9 red algae and 8 green algae). Metal biosorption research with algae has used mainly brown algae in pursuit of treatments, which improve its sorption uptake. The information available in connection with multimetallic systems is very poor. Values of q_max were close to 1 mmol/g for copper and lead and smaller for the other metals. Metal recovery performance was worse for nickel and zinc, but the number of samples for zinc was very small. All the metals except lead present a similar affinity for brown algae. The difference in the behavior of lead may be due to a different uptake mechanism. Brown algae stand out as very good biosorbents of heavy metals. The best performer for metal biosorption is lead.     

Multi-metal biosorption and bioaccumulation by Exiguobacterium sp. ZM-2

The present work deals with the biosorption performance of dried and non-growing biomasses of Exiguobacterium sp. ZM-2, isolated from soil contaminated with tannery effluents, for the removal of Cd²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ from aqueous solution. The metal concentrations studied were 25 mg/l, 50 mg/l, 100 mg/l, 150 mg/l and 200 mg/l. The effect of solution pH and contact time was also studied. The biosorption capacity was significantly altered by pH of the solution. The removal of metal ions was conspicuously rapid; most of the total sorption occurred within 30 min. The sorption data have been analyzed and fitted to the Langmuir and Freundlich isotherm models. The highest Q_max value was found for the biosorption of Cd²⁺ at 43.5 mg/g in the presence of the non-growing biomass. Recovery of metals (Cd²⁺, Zn²⁺, Cu²⁺ and Ni²⁺) was found to be better when dried biomass was used in comparison to non-growing biomass. Metal removal through bioaccumulation was determined by growing the bacterial strain in nutrient broth amended with different concentrations of metal ions. This multi-metal resistant isolate could be employed for the removal of heavy metals from spent industrial effluents before discharging them into the environment.     

Yersiniabactin metal binding characterization and removal of nickel from industrial wastewater

Yersiniabactin (Ybt) is a metal‐binding natural product that has been re‐purposed for water treatment. The early focus of this study was the characterization of metal binding breadth attributed to Ybt. Using LC‐MS analysis of water samples exposed to aqueous and surface‐localized Ybt, quantitative assessment of binding was completed with metals that included Pd²⁺, Mg²⁺, and Zn²⁺. In total, Ybt showed affinity for 10 metals. Next, Ybt‐modified XAD‐16N resin (Ybt‐XAD) was utilized to quantify the affinity for metal removal, showing a rank order of Fe³⁺ > Ga³⁺ > Ni²⁺ > Cu²⁺ > Cr²⁺≈Zn²⁺ > Co²⁺ > Pd²⁺ > Mg²⁺ > Al³⁺, and in the applied treatment of wastewater from a local precious metal plating company, showing selective removal of nickel from the aqueous effluent. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1548–1554, 2017     

Trace metals complexation behavior with root exudates induced by salinity from a mangrove plant Avicennia marina (Forsk.) Vierh

This study investigated the characteristics of exudates from mangrove plant Avicennia marina seedling roots under 0, 200 and 600?mM NaCl treatments and their complexation behavior with trace metals using excitation emission matrix (EEM) fluorescence spectrometry. Two fulvic-like fluorescence peaks, namely peak A (Em = 440?nm, Ex = 250?nm, UV fulvic-like compounds) and peak B (Em = 440?nm, Ex = 340?nm, visible fulvic-like compounds) were identified. The fluorescence intensities of peak A and peak B were enhanced by increasing salinity. Furthermore, the fluorescence of both peaks could be quenched by the ions of copper (Cu²⁺), manganese (Mn²⁺) and cadmium (Cd²⁺). Conditional stability constant (logK_a) exhibited that binding capacity of both peak A and peak B with trace metals are Cu²⁺?>?Mn²⁺?>?Cd²⁺ in the range from 2.21 to 4.01. Besides, Hill coefficient (n) >1 for Cu²⁺ but n?<?1 for Mn²⁺ and Cd²⁺. The results of high n and high logK_a for Cu²⁺ rather than Mn²⁺ and Cd²⁺ indicate that the fulvic-like compounds in root exudates of A. marina have maximum potential for Cu²⁺ complexation compared to Mn²⁺ and Cd²⁺, suggesting the fulvic acids in root exudates of A. marina have strong complexation with Cu²⁺ rather than Mn²⁺ and Cd²⁺.     

Compartments for the Management of Municipal Solid Waste

Despite technological developments and improved liner-material applications, heavy metals in landfill leachate still penetrate the soil profile, polluting the soil and ground-water. An alternative approach therefore must be explored to reduce heavy-metal migration in soil-bentonite landfill liners. By considering the interaction of different heavy metals and their synergetic and antagonistics behaviors, such an approach could be developed. Low mobility metals such as Cu²⁺, and Pb²⁺ inhibit the adsorption of Cd²⁺ which is a moderate-mobility metal and Cu²⁺ sorption is decreased by the presence of Zn²⁺ and Cd²⁺. Therefore, Zn²⁺, a low-mobility metal, cannot be grouped with Cu²⁺. This way, four compatible metal groups have been identified: (1) low mobility: Pb²⁺, Cu²⁺, and Ag, (2) low mobility: Zn²⁺ and Cr³⁺; (3) moderate mobility: As²⁺, Fe²⁺, and Ni²⁺; (4) high mobility: Cd²⁺ and Hg²⁺. Cd²⁺ with a moderate mobility pattern is synergetic to Fe²⁺ and is more mobile with Ni²⁺. Therefore, Cd²⁺ is separated from the moderate-mobility group and is consigned with Hg, a high-mobility metal. The liner materials suitable for Hg²⁺ are assumed to be suitable for Cd²⁺ as well. Based on this concept, and to reduce heavy metal mobility, wastes should be segregated on compatibility basis according to their heavy metal contents before being disposed in different individual compartments. For wastes containing several incompatible heavy metals, sorting should be based on the heavy-metal with the highest concentration. Another solution is the manufacturing of products using compatible heavy metal combinations and then labeling them accordingly. Such waste segregation and landfill compartmentalization lowers risks of groundwater contamination and liner cost.     

pH effects on the removal of Cu2+, Cd2+ and Pb2+ from aqueous solution by waste brewery biomass

An industrial strain of Saccharomyces cerevisiae collected from the waste of a brewing industry was used to remove lead, cadmium and copper from aqueous solutions (1?mm). Metal removal efficiency by using either biomass suspension directly diluted into the metal solutions or biomass previously incubated and washed in distilled water was compared. In all experiments with unwashed biomass a shift in the medium pH from 4.5 to a final value in the 7.0–8.0 range occurred. This pH increase was responsible for a metal precipitation effect associated to the metal biosorption. A very different pH profile was observed when washed biomass was used leading to different removal profiles for Cd²⁺ and Pb²⁺ and a similar one for Cu²⁺. In the absence of biomass, medium components and/or the excreted intracellular products proved to interfere in the metal removal and to be responsible for 80% Pb²⁺ precipitation, in the pH 4.5–5.0 range. To initial metal solution pH, leading to the lowest residual ion concentrations, after 96?h of contact with unwashed biomass and in the absence of pH adjustment, was 4.5–5.0. Continuous or stepwise adjustment of medium pH to this range during the process was unfavourable for metal removal, being the continuous adjustment the worst procedure. In this case, Cd²⁺ was not biosorbed and Cu²⁺ removal decreased from 76 to 33%. However, Pb²⁺ was always extensively removed (89%) and only slightly affected by pH control. The global results suggest different removal mechanisms for each cation. Cu²⁺ was removed by both metal sorption and precipitation, due to the pH shift that occurred during the process, while Cd²⁺ removal showed to be completely dependent of this pH shift. Pb²⁺ was totally and quickly removed, by precipitation, in the presence of the biomass suspension and at pH 4.5. Moreover, the biosorbent changes occurring during the process played an important role in the metal removal when non-viable microbial biomass is used.     

Heavy metal uptake capacities by the common freshwater green alga Cladophora fracta

Macroalgae have received much attention for heavy metal removal in treatment of domestic wastewater. In this report, the uptake capacity of a common freshwater green alga, Cladophora fracta, for heavy metal ions (copper, zinc, cadmium, and mercury) was evaluated. The equilibrium adsorption capacities were 2.388?mg Cu²⁺, 1.623?mg Zn²⁺, 0.240?mg Cd²⁺, and 0.228?mg Hg²⁺ per gram of living algae at 18°C and pH?5.0. The removal efficiency for Cu²⁺, Zn²⁺, Cd²⁺, and Hg²⁺ were 99, 85, 97, and 98%, respectively. Greater removal efficiency was achieved when the concentrations of metal ions were at very low level. The results indicated that living algae are suitable for removal and recovery of heavy metal ions from aqueous solutions and can be a potential tool to treat industrial wastewater.     

Cadmium binding characterization and mechanism of a newly isolated strain Cystobasidium oligophagum QN-3

The aim of this study was to screen a strain for the removal of Cd²⁺ from aqueous solution and investigate the characterization and mechanism of the Cd²⁺ binding process. A novel strain of yeast showed high tolerance of cadmium, namely Cystobasidium oligophagum QN-3, was isolated from soils, which could resist 22,000 mg/L and 18,000 mg/L Cd²⁺ on PDA (potato dextrose agar) plate and in PDA liquid medium, respectively. Cd²⁺ binding experiment showed that the strain could remove Cd²⁺ from aqueous solution effectively, the maximum Cd²⁺ removal rate of 84.45% was achieved at initial Cd²⁺ concentration 30 mg/L. Scanning electron microscopy (SEM) analysis revealed that sorption of Cd²⁺ by cells could be associated with changes in the cell surface morphology. Fourier transform-infrared spectroscopy (FTIR) analysis confirmed the important role of the functional groups  OH, CO,  NH₂, COO , PO, and CH on the cell surface in the binding of Cd²⁺. The comparison of the binding ability of different cellular parts indicated a significant role of the cell wall played in the Cd²⁺ binding process. Pretreatment of the cells by boiling or ultrasonication could improve the biosorption capacity of QN-3. In addition, QN-3 exhibited selective and preferential property of binding capacity for other heavy metals, such as Pb²⁺, Cu²⁺, Cd²⁺, Zn²⁺, and Ni²⁺. These data suggested the promising use of Cystobasidium oligophagum QN-3 as an effective and friendly biosorbent for cadmium or other heavy metals decontamination in the environment.     

Inhibition by Cu2+ and Cd2+ of a mu‐class glutathione S‐transferase from shrimp Litopenaeus vannamei

Glutathione S‐transferases (GSTs) are a family of detoxifying enzymes that catalyze the conjugation of glutathione (GSH) to electrophiles, thereby increasing the solubility of xenobiotics and aiding its excretion from the cell. The present work presents the inhibition of a mu‐class GST of the marine shrimp Litopenaeus vannamei by copper (Cu²⁺) and cadmium (Cd²⁺). The protein was overexpressed in bacteria and its enzymatic activity measured using 1‐chloro‐2,4‐dinitrobenzene. The mean inhibitory concentration (IC₅₀) for shrimp GST against Cu²⁺ was 4.77 μM and for Cd²⁺ was 0.39 μM. A molecular model of the protein based on the crystal structure of a maize GST bound to cadmium showed that the metal binds in the GSH‐binding site by coordination with Asp and Gln residues. These results are consistent with the experimental data and suggest that sublethal concentration of metals may affect the capacity of the organism to detoxify pesticides or xenobiotics. © 2010 Wiley Periodicals, Inc. J Biochem Mol Toxicol 24:218–222, 2010; View this article online at wileyonlinelibrary.com . DOI 10.1002/jbt.20326     

Copper–Nickel Nitride Nanosheets as Efficient Bifunctional Catalysts for Hydrazine‐Assisted Electrolytic Hydrogen Production

Electrocatalytic water splitting is one of the sustainable and promising strategies to generate hydrogen fuel but still remains a great challenge because of the sluggish anodic oxygen evolution reaction (OER). A very effective approach to dramatically decrease the input cell voltage of water electrolysis is to replace the anodic OER with hydrazine oxidation reaction (HzOR) due to its lower thermodynamic oxidation potential. Therefore, developing the low‐cost and efficient HzOR catalysts, coupled with the cathodic hydrogen evolution reaction (HER), is tremendously important for energy‐saving electrolytic hydrogen production. Herein, a new‐type of copper–nickel nitride (Cu₁Ni₂‐N) with rich Cu₄N/Ni₃N interface is rationally constructed on carbon fiber cloth. The 3D electrode exhibits extraordinary HER performance with an overpotential of 71.4 mV at 10 mA cm^?2 in 1.0 m KOH, simultaneously delivering an ultralow potential of 0.5 mV at 10 mA cm^?2 for HzOR in a 1.0 m KOH/0.5 m hydrazine electrolyte. Moreover, the electrolytic cell utilizing the synthesized Cu₁Ni₂‐N electrode as both the cathode and anode display a cell voltage of 0.24 V at 10 mA cm^?2 with an excellent stability over 75 h. The present work develops the promising copper–nickel‐based nitride as a bifunctional electrocatalyst through hydrazine‐assistance for energy‐saving electrolytic hydrogen production.     

Stability of Ca2+-, Cd2+-, Cu2+-[illite-humic] complexes and pH influence

Decomposition of fresh plant residues in soil is expected to produce humic fractions varying in molecular size. It was hypothesized that metal adsorption by soil, to some degree, will depend on humic acid content and molecular size. The latter is expected to vary in number and type of functional groups. In this study, illite-humic complexes were used to evaluate Ca²⁺, Cd²⁺, and Cu²⁺ adsorption and how this adsorption was affected by humic acids, differing in molecular size, under various pH values. Potentiometric titration using ion-selective electrodes with a stop-and-go procedure was employed to evaluate metal-[illite-humic] complex formation. The results showed that illite-humic complexes exhibited at least two types of metal-ion adsorption sites (low and high affinity) and molecular size of humic fractions had a large potential influence on total metal adsorption but a relatively smaller influence on metal-complex stability. Relative strength of metal-ion-[illite-humic] complexes followed the order of Cu²⁺>Cd²⁺>Ca²⁺ and were affected by pH, especially for low metal-ion affinity sites. Magnitude of metal-[illite-humic] stability constants, depending on molecular size of humic fraction and pH, varied on a log-scale from 3.52 to 4.21 for Ca²⁺, 4.38 to 5.18 for Cd²⁺and from 5.23 to 5.83 for Cu²⁺. There was an approximate 5-fold difference in these stability constants between the three different sizes of humic fractions. The larger the humic fraction, the lower the metal-[illite-humic] stability constant. This revised version was published online in June 2006 with corrections to the Cover Date. This revised version was published online in June 2006 with corrections to the Cover Date. This revised version was published online in June 2006 with corrections to the Cover Date.     

Inhibition of Urease from Seeds of Water-melon (Citrullus vulgaris) by Heavy Metal Ions

Urease from the seeds of water melon was found to be inhibited by heavy metal ions like copper, lead, nickel and cobalt. The order of effectiveness of these metals as inhibitors was Cu²⁺ > Pb²⁺ > Ni²⁺ > Co²⁺. The inhibition by these ions was noncompetitive. Time — dependent interaction of urease with nickel and cobalt exhibited a biphasic inhibition behaviour in which approximately half of the initial activity was lost rapidly (within 2 min) and remainder in a slow phase. The inhibition was largely irreversible, hence could not be reversed by dialysis. These observations are suggestive of half-and-half distribution of — SH groups on the native enzyme resulting urease into asymmetric oligomeric molecule.     

Heavy-metal ion uptake by plants from nutrient solutions with metal ion,plant species and growth period variations

Summary Rape, cucumber, wheat, oats and tomato were grown for one to two weeks in nutrient solutions with heavy metals added. Of the metal ions tested (Cr³⁺, Cu²⁺, Co²⁺, CrO₄ ^2-, Ni²⁺, Cd²⁺, Pb²⁺, Mn²⁺, Zn²⁺ and Ag⁺), manganese, nickel and lead exhibited the greatest mobility in cucumber plants, which resulted in the highest shoot/root concentration ratio. Silver was not translocated to the shoots of cucumber plants in measurable amounts.When the plants were grown with 1.0, 10 and 100 M cadmium or nickel in the solution, the shoot and root concentration increased 5–10 times if the metal ion concentration of the solution was increased 10 times.The plants showed great differences in cadmium and nickel uptake. In the shoot, the cadmium concentration increased in the order: oats = wheat < cucumber = rape < tomato, and in the root in the order: oats = wheat < cucumber = rape < tomato. The great uptake of cadmium and nickel by tomato is notable and agrees with other reports.The nickel, and especially the cadmium, concentration in roots and shoots increases with the age of the plant.The results are discussed and related to other investigations. The need for research on the uptake mechanisms of non-essential heavy metals is emphasized. re]19750415     

Heterologous Expression and Metal-Binding Characterization of a Type 1 Metallothionein Isoform (OsMTI-1b) from Rice (Oryza sativa)

Metallothioneins (MTs) are ubiquitous, low molecular mass and cysteine-rich proteins that play important roles in maintaining intracellular metal homeostasis, eliminating metal toxification and protecting the cells against oxidative damages. MTs are able to bind metal ions through the thiol groups of their cysteine residues. Plants have several MT isoforms which are classified into four types based on the arrangement of cysteine residues. In the present study, a rice (Oryza sativa) gene encoding type 1 MT isoform, OsMTI-1b, was inserted in vector pET41a and overexpressed in Escherichia coli as carboxy-terminal extensions of glutathione-S-transferase (GST). The recombinant protein GST-OsMTI-1b was purified using affinity chromatography and its ability to bind with Ni²⁺, Cd²⁺, Zn²⁺ and Cu²⁺ ions was analyzed. The results demonstrated that this isoform has ability to bind Ni²⁺, Cd²⁺ and Zn²⁺ ions in vitro, whereas it has no substantial ability to bind Cu²⁺ ions. From competitive reaction with 5,5′-dithiobis(2-nitrobenzoic acid), DTNB, the affinity of metal ions for recombinant form of GST-OsMTI-1b was as follows: Ni²⁺/Cd²⁺ > Zn²⁺ > Cu²⁺     

Effect of metal Ions (Ni<Superscript>2+</Superscript>, Cu<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript>) and water coordination on the structure of L-phenylalanine,L-tyrosine,L-tryptophan and their zwitterionic forms

Methods of quantum chemistry have been applied to double-charged complexes involving the transition metals Ni²⁺, Cu²⁺ and Zn²⁺ with the aromatic amino acids (AAA) phenylalanine, tyrosine and tryptophan. The effect of hydration on the relative stability and geometry of the individual species studied has been evaluated within the supermolecule approach. The interaction enthalpies, entropies and Gibbs energies of nine complexes Phe•M, Tyr•M, Trp•M, (M = Ni²⁺, Cu²⁺ and Zn²⁺) were determined at the Becke3LYP density functional level of theory. Of the transition metals studied the bivalent copper cation forms the strongest complexes with AAAs. For Ni²⁺and Cu²⁺ the most stable species are the NO coordinated cations in the AAA metal complexes, Zn²⁺cation prefers a binding to the aromatic part of the AAA (complex II). Some complexes energetically unfavored in the gas-phase are stabilized upon microsolvation.     

Stress response in two strains of the aquatic hyphomycete <Emphasis Type="BoldItalic">Heliscus lugdunensis</Emphasis> after exposure to cadmium and copper ions

Biochemical responses to cadmium (Cd²⁺) and copper (Cu²⁺) exposure were compared in two strains of the aquatic hyphomycete (AQH) Heliscus lugdunensis. One strain (H4-2-4) had been isolated from a heavy metal polluted site, the other (H8-2-1) from a moderately polluted habitat. Conidia of the two strains differed in shape and size. Intracellular accumulation of Cd²⁺ and Cu²⁺ was lower in H4-2-4 than in H8-2-1. Both␣strains synthesized significantly more glutathione (GSH), cysteine (Cys) and γ-glutamylcysteine (γ-EC) in the presence of 25 and 50 μM Cd²⁺, but quantities and rates of synthesis were different. In H4-2-4, exposure to 50 μM Cd²⁺ increased GSH levels to 262% of the control; in H8-2-1 it increased to 156%. Mycelia of the two strains were analysed for peroxidase, dehydroascorbate reductase, glutathione reductase and glucose-6-phosphate dehydrogenase. With Cd²⁺ exposure, peroxidase activity increased in both strains. Cu²⁺ stress increased dehydroascorbate reductase activity in H4-2-4 but not in H8-2-1. Dehydroascorbate reductase and glucose-6-phosphate dehydrogenase activities progressively declined in the presence of Cd²⁺, indicating a correlation with Cd²⁺ accumulation in both strains. Cd²⁺ and Cu²⁺ exposure decreased glutathione reductase activity.     

Trace Elements in the Soil-Plant Systems of Copper Mine Areas-A Case Study From Murgul Copper Mine From the Black Sea Region of Turkey

This study presents a case study on the heavy metal analysis of soil and plant samples around the Murgul copper mine, one of the first and most important mining areas in Turkey. An attempt has been made to investigate the status of trace elements like Al³⁺, Fe²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Ni²⁺, Co²⁺ and Cd²⁺ in soils and plants. The sampling localities were taken from 500 m, 600 m, and 1000 m altitudes around the factory and at 1400 m in the forest zone. The aboveground parts and foliage ash of Silene compacta, Tussilago farfara, Smilax excelsa, Rhododendron ponticum, R. luteum, and herbal mix were analysed. The results of analysis have revealed the minimum and maximum concentrations measured in the plants as follows; aluminium (20-8985 mg kg-1), cadmium (0.0-0.5 mg kg^-1), cobalt (0.0-5.5 mg kg^-1), copper (0.0-347.5 mg kg^-1), iron (25-9320 mg kg^-1), lead (2-51 mg kg^-1), nickel (1.5-16.5 mg kg^-1), and zinc (13.0-221.0 mg kg^-1). In the soil the concentrations of aluminium, cadmium, cobalt, copper, iron, lead, nickel, and zinc vary between 33-457, 0.0-0.0, 0.0-0.4, 0.1-88.7, 14-50, 0.3-4.1, 0.2-0.8, and 4.0-20.3 mg kg^-1 respectively. These findings enlighten the fact that copper is generally toxic in the soils as well as plants. Silene compacta has been recorded as a high copper accumulator, behaving as a healthy plant on the polluted sites of the area alongside the Murgul creek (especially at 600 m). This study stresses the fact that it is imperative to assess and monitor the levels of heavy metals in the environment due to anthropogenic activities, including mining, for evaluation of human exposure and for sustainable environment.