Trees as islands: canopy ant species richness increases with the size of liana‐free trees in a Neotropical forest

The physical characteristics of habitats shape local community structure; a classic example is the positive relationship between the size of insular habitats and species richness. Despite the high density and proximity of tree crowns in forests, trees are insular habitats for some taxa. Specifically, crown isolation (i.e. crown shyness) prevents the movement of small cursorial animals among trees. Here, we tested the hypothesis that the species richness of ants (S_a) in individual, isolated trees embedded within tropical forest canopies increases with tree size. We predicted that this pattern disappears when trees are connected by lianas (woody vines) or when strong interactions among ant species determine tree occupancy. We surveyed the resident ants of 213 tree crowns in lowland tropical forest of Panama. On average, 9.2 (range = 2–20) ant species occupied a single tree crown. Average (± SE) S_a was ca 25% higher in trees with lianas (10.2 ± 0.26) than trees lacking lianas (8.0 ± 0.51). S_a increased with tree size in liana‐free trees (S_a = 10.99A^0.256), but not in trees with lianas. Ant species composition also differed between trees with and without lianas. Specifically, ant species with solitary foragers occurred more frequently in trees with lianas. The mosaic‐like pattern of species co‐occurrence observed in other arboreal ant communities was not found in this forest. Collectively, the results of this study indicate that lianas play an important role in shaping the local community structure of arboreal ants by overcoming the insular nature of tree crowns.     

Quantitative characterization of clumping in Scots pine crowns

Background and Aims

Proper characterization of the clumped structure of forests is needed for calculation of the absorbed radiation and photosynthetic production by a canopy. This study examined the dependency of crown-level clumping on tree size and growth conditions in Scots pine (Pinus sylvestris), and determined the ability of statistical canopy radiation models to quantify the degree of self-shading within crowns as a result of the clumping effect.

Methods

Twelve 3-D Scots pine trees were generated using an application of the LIGNUM model, and the crown-level clumping as quantified by the crown silhouette to total needle area ratio (STAR_crown) was calculated. The results were compared with those produced by the stochastic approach of modelling tree crowns as geometric shapes filled with a random medium.

Key Results

Crown clumping was independent of tree height, needle area and growth conditions. The results supported the capability of the stochastic approach in characterizing clumping in crowns given that the outer shell of the tree crown is well represented.

Conclusions

Variation in the whole-stand clumping index is induced by differences in the spatial pattern of trees as a function of, for example, stand age rather than by changes in the degree of self-shading within individual crowns as they grow bigger.     

Crown closure affects endophytic leaf mycobiome compositional dynamics over time in Pseudotsuga menziesii var. menziesii

Old-growth Pseudotsuga menziesii var. menziesii forests produce complex environmental and spatial gradients along which biota assemble. Given this, it has been proposed that changes in the crown microenvironment are associated with different community assembly outcomes for needle fungi. Using high-throughput sequencing, the endophytic mycobiomes of needles were characterized for increasing ages of needles sampled along the boles of eight coastal Douglas-fir trees. Leveraging airborne light detection and ranging (LiDAR) data to create three-dimensional “point cloud” representations of tree crowns revealed that crown closure accounted for more fungal compositional variation than height in crown, and fungal richness and diversity were positively correlated with increasing crown closure. Supplementing the point clouds of each climbed tree with clouds from >5,000 randomly selected trees in the study area showed that fungal communities from closed portions of the crown were increasingly structured with needle age. These findings highlight the importance of the crown microenvironment in the development of foliar fungal communities for a foundation tree species.     

Tree-tree interactions and crown complementarity: The role of functional diversity and branch traits for canopy packing

Previous studies have shown that tree species richness increases forest productivity by allowing for greater spatial complementarity of tree crowns (crown complementarity), which in turn results in more densely packed canopies. However, the mechanisms driving crown complementarity in tree species mixtures remain unclear. Here, we take advantage of a high-resolution, three-dimensional terrestrial laser scanning approach in the context of a large-scale biodiversity-ecosystem functioning experiment in subtropical China (BEF-China) to quantify the extent to which functional dissimilarity and divergences in branch traits between neighbouring trees affect crown complementarity at the scale of tree species pairs (i.e., two adjacent trees). Overall, we found no support that functional dissimilarity (divergence in morphological flexibility, specific leaf area and wood density) promotes crown complementarity. However, we show that the effects of functional dissimilarity (the plasticity of the outer crown structure) on crown complementarity vary in their magnitude and importance depending on branch trait divergences. Firstly, crown complementarity tended to be highest for tree species pairs that strongly differed in their functional traits, but were similar in branch density. In contrast, heterospecific pairs with a low functional trait divergence benefitted the most from a large difference in branch density compared with pairs characterised by a large functional dissimilarity. Secondly, the positive effects of increasing divergence in branching intensity (the plasticity of the inner crown structure) on crown complementarity became most important at low levels of functional dissimilarity, i.e. when species pairs were similar in their branch packing and vice versa. This suggests that species mixing allows trees to occupy canopy space more efficiently mainly due to phenotypic changes associated with crown morphology and branch plasticity. Our findings highlight the importance of considering outer and inner crown structures (e.g. branching architecture) to deepen our understanding of tree-tree interactions in mixed-species communities.     

Reprint of: Tree-tree interactions and crown complementarity: the role of functional diversity and branch traits for canopy packing

Previous studies have shown that tree species richness increases forest productivity by allowing for greater spatial complementarity of tree crowns (crown complementarity), which in turn results in more densely packed canopies. However, the mechanisms driving crown complementarity in tree species mixtures remain unclear. Here, we take advantage of a high-resolution, three-dimensional terrestrial laser scanning approach in the context of a large-scale biodiversity-ecosystem functioning experiment in subtropical China (BEF-China) to quantify the extent to which functional dissimilarity and divergences in branch traits between neighbouring trees affect crown complementarity at the scale of tree species pairs (i.e., two adjacent trees). Overall, we found no support that functional dissimilarity (divergence in morphological flexibility, specific leaf area and wood density) promotes crown complementarity. However, we show that the effects of functional dissimilarity (the plasticity of the outer crown structure) on crown complementarity vary in their magnitude and importance depending on branch trait divergences. Firstly, crown complementarity tended to be highest for tree species pairs that strongly differed in their functional traits, but were similar in branch density. In contrast, heterospecific pairs with a low functional trait divergence benefitted the most from a large difference in branch density compared with pairs characterised by a large functional dissimilarity. Secondly, the positive effects of increasing divergence in branching intensity (the plasticity of the inner crown structure) on crown complementarity became most important at low levels of functional dissimilarity, i.e. when species pairs were similar in their branch packing and vice versa. This suggests that species mixing allows trees to occupy canopy space more efficiently mainly due to phenotypic changes associated with crown morphology and branch plasticity. Our findings highlight the importance of considering outer and inner crown structures (e.g. branching architecture) to deepen our understanding of tree-tree interactions in mixed-species communities.     

The expression of light-related leaf functional traits depends on the location of individual leaves within the crown of isolated Olea europaea trees

Background The spatial arrangement and expression of foliar syndromes within tree crowns can reflect the coupling between crown form and function in a given environment. Isolated trees subjected to high irradiance and concomitant stress may adjust leaf phenotypes to cope with environmental gradients that are heterogeneous in space and time within the tree crown. The distinct expression of leaf phenotypes among crown positions could lead to complementary patterns in light interception at the crown scale.Methods We quantified eight light-related leaf traits across 12 crown positions of ten isolated Olea europaea trees in the field. Specifically, we investigated whether the phenotypic expression of foliar traits differed among crown sectors and layers and five periods of the day from sunrise to sunset. We investigated the consequences in terms of the exposed area of the leaves at the tree scale during a single day.Key Results All traits differed among crown positions except the length-to-width ratio of the leaves. We found a strong complementarity in the patterns of the potential exposed area of the leaves among day periods as a result of a non-random distribution of leaf angles across the crown. Leaf exposure at the outer layer was below 60 % of the displayed surface, reaching maximum interception during morning periods. Daily interception increased towards the inner layer, achieving consecutive maximization from east to west positions within the crown, matching the sun’s trajectory.Conclusions The expression of leaf traits within isolated trees of O. europaea varies continuously through the crown in a gradient of leaf morphotypes and leaf angles depending on the exposure and location of individual leaves. The distribution of light-related traits within the crown and the complementarity in the potential exposure patterns of the leaves during the day challenges the assumption of low trait variability within individuals.     

Digital image analysis of different crown shape of Platycladus orientalis

Platycladus orientalis (L.) Franco is a beautifully crown-shaped evergreen tree species used for ornamental cultivation. These trees are also important afforestation plants at hill sites containing calcareous parent rocks and exhibit high tolerance to drought and barren sites. However, Platycladus orientalis trees with abnormal crowns, such as fusiform and torch-form, have been identified at sites with extreme drought and barren hills in Shandong, China, although the abnormal crowns does not reduce the ornamental value of these trees. In the present study, we used the RGB imaging and geographical statistical analyses through the construction of meteorological indices. The results indicate that variations of abnormal Platycladus orientalis crowns are associated with both the internal metabolism of these trees and the external environment. Crown shapes are strongly affected by the local dry, hot and windy meteorological environment, particularly individuals planted at poor hill site conditions. In response to extreme events of drought, high temperature and strong winds, the twigs and scale leaves of Platycladus orientalis typically wilt from the lower part to the upper part of the crown. The fusiform and torch-form crowns are formed through the wilting of partial twigs and scale leaves to avoid the entire wilt of the trees, thereby saving the life of the tree at the expense of partial twigs and scale leaves.     

Automatic extraction and measurement of individual trees from mobile laser scanning point clouds of forests

Background and AimsIn addition to terrestrial laser scanning (TLS), mobile laser scanning (MLS) is increasingly arousing interest as a technique which provides valuable 3-D data for various applications in forest research. Using mobile platforms, the 3-D recording of large forest areas is carried out within a short space of time. Vegetation structure is described by millions of 3-D points which show an accuracy in the millimetre range and offer a powerful basis for automated vegetation modelling. The successful extraction of single trees from the point cloud is essential for further evaluations and modelling at the individual-tree level, such as volume determination, quantitative structure modelling or local neighbourhood analyses. However, high-precision automated tree segmentation is challenging, and has so far mostly been performed using elaborate interactive segmentation methods.MethodsHere, we present a novel segmentation algorithm to automatically segment trees in MLS point clouds, applying distance adaptivity as a function of trajectory. In addition, tree parameters are determined simultaneously. In our validation study, we used a total of 825 trees from ten sample plots to compare the data of trees segmented from MLS data with manual inventory parameters and parameters derived from semi-automatic TLS segmentation.Key ResultsThe tree detection rate reached 96 % on average for trees with distances up to 45 m from the trajectory. Trees were almost completely segmented up to a distance of about 30 m from the MLS trajectory. The accuracy of tree parameters was similar for MLS-segmented and TLS-segmented trees.ConclusionsBesides plot characteristics, the detection rate of trees in MLS data strongly depends on the distance to the travelled track. The algorithm presented here facilitates the acquisition of important tree parameters from MLS data, as an area-wide automated derivation can be accomplished in a very short time.     

Measure of simultaneous tree sways and estimation of crown interactions among a group of trees

We present a technique to measure the simultaneous sway of a group of trees and reconstruct the frequency of crown collisions and sway dynamics of individual or groups of trees. We placed a biaxial clinometer (tiltmeter) at the live crown base in each of ten neighboring 15-m-tall lodgepole pine trees in Alberta, Canada. Tree bole rotation at tiltmeter mount height was recorded during windy conditions at a rate of 10 times/s for the cluster of trees. Rotation angles were used in a bole curve calculation to estimate tree displacement in 2-dimensional (x, y) space. Collision reconstruction was done in Arc/Info by assigning asymmetrical crown area dimensions (polygons) to calculated bole displacement for each tree. Reconstruction of each time step measured any overlaps between crown polygon areas. Crown polygon overlaps estimated in this manner allowed assessment of collision frequencies, area of crown overlap during collisions, and identification of the tree(s) that a subject tree contacted. Collision statistics are only given for trees interior to the sensored cluster (n=3). For 15.0 min of data with an average wind speed of 4.5 m/s and a maximum of 10.0 m/s there was an average of 65 collisions/min for each tree, and an average collision overlap area of 24%. This frequency and depth of collisions supports the notion that wind-induced crown interaction inhibits lateral shoot extension and is an important mechanism for the development of crown asymmetry and crown shyness. Insight into dynamic tree sway behavior and crown interactions will allow estimation and cultivation of a forest stand structure that is more resistant to damage from wind. The techniques of recording multiple simultaneous bole sway and their reconstruction are applicable to a broad range of wind-forest interaction research.     

ARCHITECTURE AND CROWN GEOMETRY IN TABEBUIA ROSEA (BIGNONIACEAE)

In the tropical tree Tabebuia rosea, seedlings form an erect unbranched stem with rhythmic growth. Three distinct and predictable geometrical stages are then recognized in crown development. Sympodial branching begins with the arrest of the terminal bud of the trunk and symmetric outgrowth of a pair of subtending lateral buds. During an intermediate phase, branching becomes asymmetric at about Order 5. At each sympodial bifurcation there is differentiation between vigorous, relatively straight main branches (leaders) and less vigorous laterals forming regular pseudomonopodial branch complexes, which collectively constitute the cup-shaped crown. Finally, dormant lateral buds in the lowest bifurcation of the trunk are released and reiterate the original crown form. Ultimately an erect, apparently monopodial tree is formed by a set of superimposed cup-shaped crowns. Crown development of Tabebuia is unique because it involves predictable ontogenic changes in branching patterns. Crowns of open-grown Tabebuia consist of relatively few, wide branch tiers, crowns of forest grown trees are tall and narrow. Analysis of the adaptive geometry of wide vs. narrow crowns through computer simulation illustrates the precise cost of mechanical support for terminal leaf rosettes at successive developmental phases and suggests that tall, erect, narrow, and multi-tiered crowns are more efficient than wide open crowns.     

Coalescent histories for discordant gene trees and species trees

Given a gene tree and a species tree, a coalescent history is a list of the branches of the species tree on which coalescences in the gene tree take place. Each pair consisting of a gene tree topology and a species tree topology has some number of possible coalescent histories. Here we show that, for each n≥7, there exist a species tree topology S and a gene tree topology G≠S, both with n leaves, for which the number of coalescent histories exceeds the corresponding number of coalescent histories when the species tree topology is S and the gene tree topology is also S. This result has the interpretation that the gene tree topology G discordant with the species tree topology S can be produced by the evolutionary process in more ways than can the gene tree topology that matches the species tree topology, providing further insight into the surprising combinatorial properties of gene trees that arise from their joint consideration with species trees.     

北京地区侧柏人工林密度效应

密度是影响森林尤其是人工林生长的重要因素,林冠层是森林生态系统与其他系统进行能量和物质交换的重要场所,树木及树冠生长对林分密度的响应关系可以看作是生物对环境变化产生的适应性现象。林分密度效应是生态学和森林培育学的重要研究内容之一。以23块8种不同密度梯度的北京山区侧柏人工幼龄林林分为研究对象分析其树木生长及树冠生长对密度的响应关系,其中树冠指标使用了参照了美国林务局(USDA)的树冠调查指标。研究结果表明:(1)林分平均胸径、平均树高和平均冠幅生长均随密度增大而减小,林分密度大于3000株/hm2时各指标减小的趋势变缓,使用异速生长模型可以很好地拟合这种变化关系;(2)随密度增加,树冠水平方向和垂直方向生长均到显著地抑制作用,树冠外形表现出由饱满冠型向狭长冠型变化的适应性现象;(3)使用树冠二维、三维指标与密度进行相关性分析可知树冠长度、树冠率等指标与林分密度呈负相关关系,树冠圆满度及树冠生产效率与密度表现出极显著正相关关系;(4)采用枝解析的方法研究了树枝长度、材积的平均生长量、连年生长量与密度的关系,结果表明幼龄期各生长量差异不大;(5)在建立冠幅模型时考虑了自变量间的多重共线性问题,所建的胸径单自变量二次方模型能够很好地预测侧柏人工幼龄林冠幅生长过程,模型相关系数R2为0.961。     

Variation in litter under individual tree crowns: Implications for scattered tree ecosystems

In forest ecosystems litter is usually assessed in terms of the average amount produced by the canopy. In scattered tree ecosystems this approach is problematic because the canopy is discontinuous and the spatial arrangement of litter highly variable. We addressed this problem by quantifying the spatial variation in litter load and litter composition associated with individual trees in a Eucalyptus melliodora – Eucalyptus blakelyi woodland. Litter was sampled under crowns and in grassland adjacent to 10 E. blakelyi and 10 E. melliodora trees ranging in diameter at breast height (dbh) from 14 to 129 cm. A total of 302 L samples were collected from these trees, at distances ranging from 0 to 42 m from main stem. The sampled litter loads ranged from 0.02 to 109.3 t ha^?1 and were significantly higher under tree crowns than in grassland for litter and each component of litter (leaves, bark, fine twigs, coarse twigs). In particular, the mean litter load under tree crowns (12.5 t ha^?1) was an order of magnitude higher than the mean litter load in grassland (1.27 t ha^?1). There was a significant (P = 0.0103) positive relationship between mean litter load under the tree crown and dbh, indicating larger trees produced more litter per unit area of ground than smaller trees. Generalized Linear Modelling produced highly significant (P < 0.0001) models predicting the spatial variation in litter load and litter composition in terms of distance from main stem and dbh. Our models demonstrate gradients in litter load and composition under tree crowns. These gradients were most pronounced for the large trees in our study. The disproportionate input of litter and variety of litter components associated with large trees in our study supports their keystone role in scattered tree ecosystems and highlights the need to maintain these structures in agricultural landscapes.     

Above-ground biomass references for urban trees from terrestrial laser scanning data

Background and AimsWithin extending urban areas, trees serve a multitude of functions (e.g. carbon storage, suppression of air pollution, mitigation of the ‘heat island’ effect, oxygen, shade and recreation). Many of these services are positively correlated with tree size and structure. The quantification of above-ground biomass (AGB) is of especial importance to assess its carbon storage potential. However, quantification of AGB is difficult and the allometries applied are often based on forest trees, which are subject to very different growing conditions, competition and form. In this article we highlight the potential of terrestrial laser scanning (TLS) techniques to extract highly detailed information on urban tree structure and AGB.MethodsFifty-five urban trees distributed over seven cities in Switzerland were measured using TLS and traditional forest inventory techniques before they were felled and weighed. Tree structure, volume and AGB from the TLS point clouds were extracted using quantitative structure modelling. TLS-derived AGB estimates were compared with AGB estimates based on forest tree allometries dependent on diameter at breast height only. The correlations of various tree metrics as AGB predictors were assessed.Key ResultsEstimates of AGB derived by TLS showed good performance when compared with destructively harvested references, with an R² of 0.954 (RMSE = 556 kg) compared with 0.837 (RMSE = 1159 kg) for allometrically derived AGB estimates. A correlation analysis showed that different TLS-derived wood volume estimates as well as trunk diameters and tree crown metrics show high correlation in describing total wood AGB, outperforming tree height.ConclusionsWood volume estimates based on TLS show high potential to estimate tree AGB independent of tree species, size and form. This allows us to retrieve highly accurate non-destructive AGB estimates that could be used to establish new allometric equations without the need for extensive destructive harvesting.     

Hidden crown jewels: the role of tree crowns for bryophyte and lichen species richness in sycamore maple wooded pastures

Tree crowns typically cover the vast majority of the surface area of trees, but they are rarely considered in diversity surveys of epiphytic bryophytes and lichens, especially in temperate Europe. Usually only stems are sampled. We assessed the number of bryophyte and lichen species on stems and in crowns of 80 solitary sycamore maple trees (Acer pseudoplatanus) at six sites in wooded pastures in the northern Alps. The total number of species detected per tree ranged from 13 to 60 for bryophytes, from 25 to 67 for lichens, and from 42 to 104 for bryophytes and lichens considered together. At the tree level, 29 % of bryophyte and 61 % of lichen species were recorded only in the crown. Considering all sampled trees together, only 4 % of bryophyte, compared to 34 % of lichen species, were never recorded on the stem. Five out of 10 red-listed bryophyte species and 29 out of 39 red-listed lichen species were more frequent in crowns. The species richness detected per tree was unexpectedly high, whereas the proportion of exclusive crown species was similar to studies from forest trees. For bryophytes, in contrast to lichens, sampling several stems can give a good estimation of the species present at a site. However, frequency estimates may be highly biased for lichens and bryophytes if crowns are not considered. Our study demonstrates that tree crowns need to be considered in research on these taxa, especially in biodiversity surveys and in conservation tasks involving lichens and to a lesser degree also bryophytes.     

Tree shape plasticity in relation to crown exposure

Trees outside closed forest stands differ in the relation between stem diameter, height and crown volume from trees that grew with neighbours close by. Whether this plasticity in tree shape varies between species in relation to their light requirement is unknown. We purposefully sampled 528 trees ranging 5–100?cm diameter at breast height growing in a range of light conditions. Across ten broad-leaved species observed in Sumatra or Kalimantan, a generic relationship was found between light exposure of the crown and a light-dependent a _l parameter that modifies the height–diameter allometric equation (H?=?a _l D ^b ) from those for closed stands. In our results, vertical stretching is well predicted by light availability. In fully open conditions, trees are on average 31% shorter for the same diameter than under (partial) shade. Most of the stretching response occurs in all species as soon as some degree of lateral shading occurs. The response, however, varies by species (8–44% reduction) in a way apparently unrelated to species’ successional status. Crown volume varied less than stem height in its relationship with stem diameter across all light conditions tested. The scaling of crown volume with stem diameter, however, differed markedly between tree species.     

Predicting Douglas‐fir Sapling Mortality Following Prescribed Fire in an Encroached Grassland

Tree encroachment in fire‐maintained woodlands and grasslands is a major management concern, yet little information exists regarding the mechanisms of small tree mortality following prescribed burns. We sought to clarify the relative importance of tree size and fire‐induced injury in the post‐fire mortality of encroaching Douglas‐fir trees and to compare results with an existing mortality model for larger Douglas‐fir trees. Crown injury to small Douglas‐fir trees was a significant explanatory variable in post‐fire mortality models, with results suggesting a 20% threshold in crown scorch. Crown injury was strongly related to bole injury, and delayed mortality was important as we documented new mortality 20 months post‐burn. Mortality models for large Douglas‐fir tend to over‐predict small tree mortality, underscoring the need to better understand the mechanisms of fire‐caused mortality for small, encroaching trees.     

Vertical stratification and effects of crown damage on maximum tree height in mixed conifer–broadleaf forests of Yakushima Island,southern Japan

We investigated vertical stratification and effects of crown damage on maximum tree height in two mixed conifer–broadleaf forests in Yakushima Island, southern Japan. In both research plots, the conifer trees dominated the upper canopy while the broadleaved trees dominated the middle to lower canopy. Most broadleaved trees were shorter than the median crown-base height (H _CB) of the conifer trees. Estimates of the maximum height (H _max) of the conifer trees were greater than those of the broadleaved trees. Crown damage had significant negative effects on maximum height of the conifer trees. Crown damage was observed for 72.8–88.7% of the conifer trees, and severe types of damage such as stem breakage and top die-back were the most predominant. The H _max of the damaged conifer trees was 16–17% shorter than that of the intact trees and as much as 16–28% shorter than the potential maximum height estimated from the diameter–height relationship of the tallest intact trees. We inferred that crown disturbance is an important factor determining the maximum height of the canopy of the two mixed forests. Our results suggested that vertical stratification between conifer and broadleaved trees may be an important mechanism contributing to their coexistence and additive basal area of mixed forests on Yakushima Island.     

Intratree Variation in Fruit Production and Implications for Primate Foraging

We tested the hypothesis that fruit quantity and quality vary vertically within trees. We quantified intratree fruit production before exploitation by frugivores at different heights in 89 trees from 17 species fed on by primates in Kibale National Park, Uganda. We also conducted a pilot study to determine if the nutritional value of fruit varied within tree crowns. Depending on the species and crown size, we divided tree canopies into 2 or 3 vertical layers. In 2-layered trees, upper crowns produced fruits that were 9.6–30.1% bigger and 0.52–140 times the densities of those from lower crowns, with one exception. Among 2-layered trees, upper crowns produced a mean of 46.9 fruits/m³ (median 12.1), while lower crowns produced a mean of 14.1 fruits/m³ (median 2.5). Among 3-layered trees, upper crowns produced a mean density of 49.9 fruits/m³ (median 12.5), middle crowns a mean of 16.8 fruits/m³ (median 6.6), and lower crowns a mean of 12.8 fruits/m³ (median 1.8). Dry pulp and moisture were systematically greater per fruit in the highest compared to the lowest canopy layers (22.4% and 16.4% respectively in 2-layered trees, 49.7% and 21.8% respectively in 3-layered trees). In 1 tree of Diospyros abyssinica, a pilot nutritional study showed that upper crown ripe fruit contained 41.9% more sugar, 8.4% more crude proteins, and 1.8 times less of the potentially toxic saponin than lower crown ripe fruit, but the result needs to be verified with more individuals and species of trees. We discuss the consequences of intratree variations in fruit production with respect to competition among frugivorous primates.     

Common allometric response of open-grown leader shoots to tree height in co-occurring deciduous broadleaved trees

Background and Aims

Morphology of crown shoots changes with tree height. The height of forest trees is usually correlated with the light environment and this makes it difficult to separate the effects of tree size and of light conditions on the morphological plasticity of crown shoots. This paper addresses the tree-height dependence of shoot traits under full-light conditions where a tree crown is not shaded by other crowns.

Methods

Focus is given to relationships between tree height and top-shoot traits, which include the shoot''s leaf-blades and non-leafy mass, its total leaf-blade area and the length and basal diameter of the shoot''s stem. We examine the allometric characteristics of open-grown current-year leader shoots at the tops of forest tree crowns up to 24 m high and quantify their responses to tree height in 13 co-occurring deciduous hardwood species in a cool-temperate forest in northern Japan.

Key Results

Dry mass allocated to leaf blades in a leader shoot increased with tree height in all 13 species. Specific leaf area decreased with tree height. Stem basal area was almost proportional to total leaf area in a leader shoot, where the proportionality constant did not depend on tree height, irrespective of species. Stem length for a given stem diameter decreased with tree height.

Conclusions

In the 13 species observed, height-dependent changes in allometry of leader shoots were convergent. This finding suggests that there is a common functional constraint in tree-height development. Under full-light conditions, leader shoots of tall trees naturally experience more severe water stress than those of short trees. We hypothesize that the height dependence of shoot allometry detected reflects an integrated response to height-associated water stress, which contributes to successful crown expansion and height gain.