Adhesively-tensed cell membranes: lysis kinetics and atomic force microscopy probing

Membrane tension underlies a range of cell physiological processes. Strong adhesion of the simple red cell is used as a simple model of a spread cell with a finite membrane tension-a state which proves useful for studies of both membrane rupture kinetics and atomic force microscopy (AFM) probing of native structure. In agreement with theories of strong adhesion, the cell takes the form of a spherical cap on a substrate densely coated with poly-L-lysine. The spreading-induced tension, sigma, in the membrane is approximately 1 mN/m, which leads to rupture over many minutes; and sigma is estimated from comparable rupture times in separate micropipette aspiration experiments. Under the sharpened tip of an AFM probe, nano-Newton impingement forces (10-30 nN) are needed to penetrate the tensed erythrocyte membrane, and these forces increase exponentially with tip velocity ( approximately nm/ms). We use the results to clarify how tapping-mode AFM imaging works at high enough tip velocities to avoid rupturing the membrane while progressively compressing it to a approximately 20-nm steric core of lipid and protein. We also demonstrate novel, reproducible AFM imaging of tension-supported membranes in physiological buffer, and we describe a stable, distended network consistent with the spectrin cytoskeleton. Additionally, slow retraction of the AFM tip from the tensed membrane yields tether-extended, multipeak sawtooth patterns of average force approximately 200 pN. In sum we show how adhesive tensioning of the red cell can be used to gain novel insights into native membrane dynamics and structure.     

Characterization of the adhesive mucilages secreted by live diatom cells using atomic force microscopy

Atomic Force Microscopy (AFM) resolved the topography and mechanical properties of two distinct adhesive mucilages secreted by the marine, fouling diatom Craspedostauros australis. Tapping mode images of live cells revealed a soft and cohesive outer mucilage layer that encased most of the diatom's siliceous wall, and force curves revealed an adhesive force of 3.58 nN. High loading force, contact mode imaging resulted in cantilever 'cleaned' cell walls, which enabled the first direct observation of the active secretion of soft mucilage via pore openings. A second adhesive mucilage consisted of strands secreted at the raphe, a distinct slit in the silica wall involved in cell-substratum attachment and motility. Force measurements revealed a raphe adhesive strand(s) resistant to breaking forces up to 60 nN, and these strands could only be detached from the AFM cantilever probe using the manual stepper motor.     

Nonspecific interactions in AFM force spectroscopy measurements

Sample-probe contact duration (dwell time) and loading force are two important parameters for the atomic force microscopy (AFM) force spectroscopy measurements of ligand-receptor interaction. A prolonged contact time may be required to initiate ligand-receptor binding as a result of slow on-rate kinetics or low reactant density. In general, increasing contact duration promotes nonspecific interactions between the substrate and the functionalized cantilever and, thus, masking the detection of the specific interactions. To reduce the nonspecific interactions in AFM force measurements requiring extended substrate-probe contact, we investigated the interaction of bovine serum albumin (BSA)-functionalized cantilever with BSA-coated glass, polyethylene glycol (PEG)-functionalized glass, Pluronic-treated Petri dishes and agarose beads. The frequency of nonspecific interaction between the BSA-functionalized cantilever and the different samples increased with loading force and dwell time. This increase in nonspecific adhesion can be attributed to the interaction mediated by forced unfolding of BSA. By reducing the loading force, the contact duration of the AFM probe with an agarose bead can be extended to a few minutes without nonspecific adhesion.     

Measurement of interaction force between nanoarrayed integrin alphavbeta3 and immobilized vitronectin on the cantilever tip

Protein nanoarrays containing integrin alphavbeta3 or BSA were fabricated on ProLinker-coated Au surface by dip-pen nanolithography (DPN). An atomic force microscope (AFM) tip coated with ProLinker was modified by vitronectin. We measured the interaction force between nanoarrayed integrin alphavbeta3 or BSA and immobilized vitronectin on the cantilever tip by employing tethering-unbinding method. The unbinding force between integrin alphavbeta3 and vitronectin (1087+/-62 pN) was much higher than that of between BSA and vitronectin (643+/-74 pN). These results demonstrate that one can distinguish a specific protein interaction from non-specific interactions by means of force measurement on the molecular interactions between the nanoarrayed protein and its interacting protein on the AFM tip.     

The measurement of Bacillus mycoides spore adhesion using atomic force microscopy,simple counting methods,and a spinning disk technique

An atomic force microscope has been used to study the adhesion of Bacillus mycoides spores to a hydrophilic glass surface and a hydrophobic-coated glass surface. AFM images of spores attached to the hydrophobic-coated mica surface allowed the measurement of spore dimensions in an aqueous environment without desiccation. The spore exosporium was observed to be flexible and to promote the adhesion of the spore by increasing the area of spore contact with the surface. Results from counting procedures using light microscopy matched the density of spores observed on the hydrophobic-coated glass surface with AFM. However, no spores were observed on the hydrophilic glass surface with AFM, a consequence of the weaker adhesion of the spores at this surface. AFM was also used to quantify directly the interactions of B. mycoides spores at the two surfaces in an aqueous environment. The measurements used "spore probes" constructed by immobilizing a single spore at the apex of a tipless AFM cantilever. The data showed that stretching and sequential bond breaking occurred as the spores were retracted from the hydrophilic glass surface. The greatest spore adhesion was measured at the hydrophobic-coated glass surface. An attractive force on the spores was measured as the spores approached the hydrophobic-coated surface. At the hydrophilic glass surface, only repulsive forces were measured during the approach of the spores. The AFM force measurements were in qualitative agreement with the results of a hydrodynamic shear adhesion assay that used a spinning disk technique. Quantitatively, AFM measurements of adhesive force were up to 4 x 10(3) times larger than the estimates made using the spinning disk data. This is a consequence of the different types of forces applied to the spore in the different adhesion assays. AFM has provided some unique insights into the interactions of spores with surfaces. No other instrument can make such direct measurements for single microbiological cells.     

Large colloidal probes for atomic force microscopy: Fabrication and calibration issues

Atomic force microscopy (AFM) is a powerful tool to investigate interaction forces at the micro and nanoscale. Cantilever stiffness, dimensions and geometry of the tip can be chosen according to the requirements of the specific application, in terms of spatial resolution and force sensitivity. Colloidal probes (CPs), obtained by attaching a spherical particle to a tipless (TL) cantilever, offer several advantages for accurate force measurements: tunable and well‐characterisable radius; higher averaging capabilities (at the expense of spatial resolution) and sensitivity to weak interactions; a well‐defined interaction geometry (sphere on flat), which allows accurate and reliable data fitting by means of analytical models. The dynamics of standard AFM probes has been widely investigated, and protocols have been developed for the calibration of the cantilever spring constant. Nevertheless, the dynamics of CPs, and in particular of large CPs, with radius well above 10 μm and mass comparable, or larger, than the cantilever mass, is at present still poorly characterized. Here we describe the fabrication and calibration of (large) CPs. We describe and discuss the peculiar dynamical behaviour of CPs, and present an alternative protocol for the accurate calibration of the spring constant.     

Atomic force microscopy: from cellular imaging to molecular manipulation

Using a sharp tip attached at the end of a soft cantilever as a probe, the atomic force microscope (AFM) explores the surface topography of biological samples bathed in physiological solutions. In the last few years, the AFM has gained popularity among biologists. This has been obtained through the improvement of the equipment and imaging techniques as well as through the development of new non-imaging applications. Biological imaging has to face a main difficulty that is the softness and the dynamics of most biological materials. Progress in understanding the AFM tip-biological samples interactions provided spectacular results in different biological fields. Recent examples of the possibilities offered by the AFM in the imaging of intact cells, isolated membranes, membrane model systems and single molecules at work are discussed in this review. Applications where the AFM tip is used as a nanotool to manipulate biomolecules and to determine intra- and intermolecular forces from single molecules are also presented.     

THE STRUCTURE AND NANOMECHANICAL PROPERTIES OF THE ADHESIVE MUCILAGE THAT MEDIATES DIATOM‐SUBSTRATUM ADHESION AND MOTILITY1

We investigated the adhesive mucilage and mechanism of cell‐substratum adhesion of two benthic raphid diatoms, the marine species Craspedostauros australis E. J. Cox and the freshwater species Pinnularia viridis (Nitzsch) Ehrenberg. SEM images of P. viridis and C. australis cells revealed the presence of multistranded tethers that appear to arise along the raphe openings and extend for a considerable distance from the cell before forming a “holdfast‐like” attachment with the substratum. We propose that the tethers result from the elongation/stretching of composite adhesive mucilage strands secreted from raphes during the onset of cell adhesion and reorientation. Atomic force microscopy (AFM) force measurements reveal that the adhesive strands originating from the nondriving raphe of live C. australis and P. viridis are highly extensible and accumulate to form tethers. During force measurements tethers can be chemically stained and are seen to extend between the cantilever tip and a cell during elongation and relaxation. In most cases, AFM force measurements recorded an interaction with a number of adhesive strands that are secreted from the raphe. The force curves of C. australis and P. viridis revealed a sawtooth pattern, suggesting the successive unbinding of modular domains when the adhesive strands were placed under stress. In addition, we applied the “fly‐fishing” technique that allowed the cantilever, suspended a distance above the cell, to interact with single adhesive strands protruding from the raphe. These force curves revealed sawtooth patterns, although the binding forces recorded were in the range for single molecule interactions.     

A new method of biosensing with 1 microl of Escherichia coli suspension using atomic force microscopy

We developed a new method for detecting bacterial cells from 1-mul samples with atomic force microscopy (AFM). The use of a parafilm surface as a sample palette was effective for reacting small amounts of samples with an AFM probe. This was due to the parafilm's hydrophobic, semitransparent, and nonadhesive surface. In this way, all processes, such as the surface functionalization of a cantilever and the adhesion of Escherichia coli cells to a cantilever, were easily completed. In addition, we succeeded in detecting cell adsorption on the same AFM cantilever by both the drive mode and the thermal mode. The resonance frequency shift caused by cell adhesion was clearly detected by the two modes for the first time. Our data indicated the potential of applying AFM nanobiosensing to extremely small amounts of samples.     

Functionalization of amino-modified probes for atomic force microscopy

The probes for atomic force microscopy (AFM) functionalized with bovine serum albumin (BSA) were obtained; they can be used for molecular recognition studies. The procedure of modification and functionalization of the AFM probe included three stages. First, amino probes were obtained by modification in vapors of an amino silane derivative. Then, a covalent bond was formed between the surface amino groups of the probe and a homobifunctional aminoreactive crosslinker. Finally, the probe with a covalently attached crosslinker was functionalized with BSA molecules. The AFM probes were characterized by force measurements at different stages of the modification; the adhesion force and the work of adhesion force were determined. The modification process was confirmed by visualization of BSA and supercoiled pGEMEX DNA molecules immobilized on the standard amino mica and on amino mica modified with a crosslinker.     

PeakForce Tapping resolves individual microvilli on living cells

Microvilli are a common structure found on epithelial cells that increase the apical surface thus enhancing the transmembrane transport capacity and also serve as one of the cell's mechanosensors. These structures are composed of microfilaments and cytoplasm, covered by plasma membrane. Epithelial cell function is usually coupled to the density of microvilli and its individual size illustrated by diseases, in which microvilli degradation causes malabsorption and diarrhea. Atomic force microscopy (AFM) has been widely used to study the topography and morphology of living cells. Visualizing soft and flexible structures such as microvilli on the apical surface of a live cell has been very challenging because the native microvilli structures are displaced and deformed by the interaction with the probe. PeakForce Tapping® is an AFM imaging mode, which allows reducing tip–sample interactions in time (microseconds) and controlling force in the low pico‐Newton range. Data acquisition of this mode was optimized by using a newly developed PeakForce QNM‐Live Cell probe, having a short cantilever with a 17‐µm‐long tip that minimizes hydrodynamic effects between the cantilever and the sample surface. In this paper, we have demonstrated for the first time the visualization of the microvilli on living kidney cells with AFM using PeakForce Tapping. The structures observed display a force dependence representing either the whole microvilli or just the tips of the microvilli layer. Together, PeakForce Tapping allows force control in the low pico‐Newton range and enables the visualization of very soft and flexible structures on living cells under physiological conditions. © 2015 The Authors Journal of Molecular Recognition Published by John Wiley & Sons Ltd.     

Quantitative membrane electrostatics with the atomic force microscope

The atomic force microscope (AFM) is sensitive to electric double layer interactions in electrolyte solutions, but provides only a qualitative view of interfacial electrostatics. We have fully characterized silicon nitride probe tips and other experimental parameters to allow a quantitative electrostatic analysis by AFM, and we have tested the validity of a simple analytical force expression through numerical simulations. As a test sample, we have measured the effective surface charge density of supported zwitterionic dioleoylphosphatidylcholine membranes with a variable fraction of anionic dioleoylphosphatidylserine. The resulting surface charge density and surface potential values are in quantitative agreement with those predicted by the Gouy-Chapman-Stern model of membrane charge regulation, but only when the numerical analysis is employed. In addition, we demonstrate that the AFM can detect double layer forces at a separation of several screening lengths, and that the probe only perturbs the membrane surface potential by <2%. Finally, we demonstrate 50-nm resolution electrostatic mapping on heterogeneous model membranes with the AFM. This novel combination of capabilities demonstrates that the AFM is a unique and powerful probe of membrane electrostatics.     

Amino-modified probes with immobilized linkers and proteins for atomic force microscopy

Functionalized by bovine serum albumin (BSA) probes for atomic force microscopy (AFM) which can be used for molecular recognition studies has been obtained. Modification and functionalization procedure of AFM probe includes three stages. First, amino probes were obtained by modification in vapors of amino silane derivative. Then surface amino groups of the amino probe interacted with homobifunctional amino reactive crosslinker. And finally, the probe with covalently attached crosslinker was functionalized by BSA molecules. Obtained AFM probes were characterized on the different stages of the modification by force measurements and the adhesion forces were determined. Process of modification was confirmed by visualization of BSA and supercoiled pGEMEX DNA molecules immobilized on the standard amino mica and amino mica modified by crosslinker.     

The distribution of sugar chains on the vomeronasal epithelium observed with an atomic force microscope

The distribution of sugar chains on tissue sections of the rat vomeronasal epithelium, and the adhesive force between the sugar and its specific lectin were examined with an atomic force microscope (AFM). AFM tips were modified with a lectin, Vicia villosa agglutinin, which recognizes terminal N-acetyl-D-galactosamine (GalNAc). When a modified tip scanned the luminal surface of the sensory epithelium, adhesive interactions between the tip and the sample surface were observed. The final rupture force was calculated to be approximately 50 pN based on the spring constant of the AFM cantilever. Distribution patterns of sugar chains obtained from the force mapping image were very similar to those observed using fluorescence-labeled lectin staining. AFM also revealed distribution patterns of sugar chains at a higher resolution than those obtained with fluorescence microscopy. Most of the adhesive interactions disappeared when the scanning solution contained 1 mM GaINAc. The adhesive interactions were restored by removing the sugar from the solution. Findings suggest that the adhesion force observed are related to the binding force between the lectin and the sugars distributed across the vomeronasal epithelium.     

Cooperative adhesion of ligand-receptor bonds

Cooperative (simultaneous) breakage of multiple adhesive bonds has been proposed as a mechanism for enhanced binding strength between adhesion molecules on apposing cell surfaces. In this report, we used the atomic force microscopy (AFM) to study how changes in binding affinity and separation rate of force-induced ligand-receptor dissociation affect binding cooperativity. The AFM force measurements were carried out using (strept)avidin-functionalized cantilever tips and biotinylated agarose beads under conditions where multiple (strept)avidin-biotin linkages were formed following surface contact. At slow surface separation of the AFM cantilever from the bead's surface, the (strept)avidin-biotin linkages appeared to rupture sequentially. Increasing the separation rate from 210 to 1950 nm/s led to a linear increase in the average rupture force. Moreover, force histograms revealed a quantized force distribution that shifted toward higher values with increasing separation rate. In measurements of streptavidin-iminobiotin adhesion, the force distribution also shifted toward higher values when the buffer was adjusted to a higher pH to raise the binding affinity. Together, these results demonstrate that the cooperativity of ligand-receptor bonds is significantly enhanced by increases in surface separation rate and/or binding affinity.     

Cell viability and probe-cell membrane interactions of XR1 glial cells imaged by atomic force microscopy.

As atomic force microscopy (AFM) imaging of live specimens becomes more commonplace, at least two important questions arise: 1) do live specimens remain viable during and after AFM, and 2) is there transfer of membrane components from the cell to the AFM probe during probe-membrane interactions? We imaged live XR1 glial cells in culture by single- or dual-pass contact or tapping-mode AFM, examined cell viability at various postimaging times, and report that AFM-imaged live XR1 cells remained viable up to 48 h postimaging and that cell death rates did not increase. To determine if nonlethal, transient interactions between the AFM probe and cell membrane led to transfer of XR1 cell membrane phospholipid components on the probe, we treated the scanned probes with the lipid-binding fluorophore FM 1-43. Confocal microscopy revealed that phospholipid membrane components did accumulate on the probe, and to a generally greater extent during contact-mode imaging than during tapping-mode imaging. Moreover, membrane accumulations on the probe were greater when live XR1 cells were damaged or perturbed, yet membrane did not accumulate in fluorescently detectable quantities during repeated "force curves" during control experiments. Taken together, our data indicate that although AFM imaging of live cells in culture does not affect long-term cell viability, there are substantial probe-membrane interactions that lead to transfer of membrane components to the probe.     

Methods for reducing nonspecific interaction in antibody-antigen assay via atomic force microscopy

We developed a method to measure the rupture forces between antibody and antigen by atomic force microscopy (AFM). Previous studies have reported that in the measurement of antibody–antigen interaction using AFM, the specific intermolecular forces are often obscured by nonspecific adhesive binding forces between antibody immobilized cantilever and substrate surfaces on which antigen or nonantigen are fixed. Here, we examined whether detergent and nonreactive protein, which have been widely used to reduce nonspecific background signals in ordinary immunoassay and immunoblotting, could reduce the nonspecific forces in the AFM measurement. The results showed that, in the presence of both nonreactive protein and detergent, the rupture forces between anti-ferritin antibodies immobilized on a tip of cantilever and ferritin (antigen) on the substrate could be successfully measured, distinguishing from nonspecific adhesive forces. In addition, we found that approach/retraction velocity of the AFM cantilever was also important in the reduction of nonspecific adhesion. These insights will contribute to the detection of specific molecules at nanometer scale region and the investigation of intermolecular interaction by the use of AFM.     

Direct measurement of single-molecule visco-elasticity in atomic force microscope force-extension experiments

Measuring the visco-elastic properties of biological macromolecules constitutes an important step towards the understanding of dynamic biological processes, such as cell adhesion, muscle function, or plant cell wall stability. Force spectroscopy techniques based on the atomic force microscope (AFM) are increasingly used to study the complex visco-elastic response of (bio-)molecules on a single-molecule level. These experiments either require that the AFM cantilever is actively oscillated or that the molecule is clamped at constant force to monitor thermal cantilever motion. Here we demonstrate that the visco-elasticity of single bio-molecules can readily be extracted from the Brownian cantilever motion during conventional force-extension measurements. It is shown that the characteristics of the cantilever determine the signal-to-noise (S/N) ratio and time resolution. Using a small cantilever, the visco-elastic properties of single dextran molecules were resolved with a time resolution of 8.3 ms. The presented approach can be directly applied to probe the dynamic response of complex bio-molecular systems or proteins in force-extension experiments. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

Parallel AFM imaging and force spectroscopy using two-dimensional probe arrays for applications in cell biology

Atomic force microscopy (AFM) investigations of living cells provide new information in both biology and medicine. However, slow cell dynamics and the need for statistically significant sample sizes mean that data collection can be an extremely lengthy process. We address this problem by parallelizing AFM experiments using a two-dimensional cantilever array, instead of a single cantilever. We have developed an instrument able to operate a two-dimensional cantilever array, to perform topographical and mechanical investigations in both air and liquid. Deflection readout for all cantilevers of the probe array is performed in parallel and online by interferometry. Probe arrays were microfabricated in silicon nitride. Proof-of-concept has been demonstrated by analyzing the topography of hard surfaces and fixed cells in parallel, and by performing parallel force spectroscopy on living cells. These results open new research opportunities in cell biology by measuring the adhesion and elastic properties of a large number of cells. Both properties are essential parameters for research in metastatic cancer development.     

The impact of hyperglycemia on adhesion between endothelial and cancer cells revealed by single‐cell force spectroscopy

The impact of hyperglycemia on adhesion between lung carcinoma cells (A549) and pulmonary human aorta endothelial cells (PHAEC) was studied using the single‐cell force spectroscopy. Cancer cells were immobilized on a tipless Atomic Force Microscopy (AFM) cantilever and a single layer of endothelial cells was prepared on a glass slide. The measured force‐distance curves provided information about the detachment force and about the frequency of specific ligand‐receptor rupture events. Measurements were performed for different times of short term (up to 2 h) and prolonged hyperglycemia (3 h ‐ 24 h). Single‐cell force results were correlated with the expression of cell adhesion molecules (intercellular adhesion molecule, P‐selectin) and with the length and density of the PHAECs glycocalyx layer, which were measured by AFM nanoindentation. For short‐term hyperglycemia, we observed a statistically significant increase of the adhesion parameters that was accompanied by an increase of the glycocalyx length and expression of P‐selectin. Removal of hyaluronic acid from PHAECs glycocalyx significantly decreased the adhesion parameters, which indicates that hyaluronic acid has a strong impact on adhesion in A549/PHAEC system in short term of hyperglycemia. For prolonged hyperglycemia, the most significant increase of adhesion parameters was observed for 24 hours and this phenomenon correlated with the expression of adhesion molecules and a decrease of the glycocalyx length. Taking together, presented data indicate that both mechanical and structural properties of the endothelial glycocalyx strongly modulate the adhesion in the A549/PHAEC system.