Metal-sulfur dπ-pπ buffering of the oxidations of metal-thiolate complexes: Photoelectron spectroscopy of (η-C5H5)Fe(CO)2SR (SR = SCH3, SBu) and (η-C5H5)Re(NO)(PR3)SCH3 (PR3 = PPr3, PPh3)

The metal-sulfur bonding present in the transition metal-thiolate complexes CpFe(CO)₂SCH₃, CpFe(CO)₂S^tBu, CpRe(NO)(PⁱPr₃)SCH₃, and CpRe(NO)(PPh₃)SCH₃ (Cp = η⁵-C₅H₅) is investigated via gas-phase valence photoelectron spectroscopy. For all four complexes a strong dπ-pπ interaction exists between a filled predominantly metal d orbital of the [CpML₂]⁺ fragment and the purely sulfur 3pπ lone pair of the thiolate. This interaction results in the highest occupied molecular orbital having substantial M-S π^∗ antibonding character. In the case of CpFe(CO)₂SCH₃, the first (lowest energy) ionization is from the Fe-S π^∗ orbital, the next two ionizations are from predominantly metal d orbitals, and the fourth ionization is from the Fe-S π orbital. The pure sulfur pπ lone pair of the thiolate fragment is less stable than the filled metal d orbitals of the [CpFe(CO)₂]⁺ fragment, resulting in a Fe-S π^∗ combination that is higher in sulfur character than the Fe-S π combination. Interestingly, substitution of a tert-butyl group for the methyl group on the thiolate causes little shift in the first ionization, in contrast to the shift observed for related thiols. This is a consequence of the delocalization and electronic buffering provided by the Fe-S dπ-pπ interaction. For CpRe(NO)(PⁱPr₃)SCH₃ and CpRe(NO)(PPh₃)SCH₃, the strong acceptor ability of the nitrosyl ligand rotates the metal orbitals for optimum backbonding to the nitrosyl, and the thiolate rotates along with these orbitals to a different preferred orientation from that of the Fe complexes. The initial ionization is again the M-S π^∗ combination with mostly sulfur character, but now has considerable mixing among several of the valence orbitals. Because of the high sulfur character in the HOMO, ligand substitution on the metal also has a small effect on the ionization energy in comparison to the shifts observed for similar substitutions in other molecules. These experiments show that, contrary to the traditional interpretation of oxidation of metal complexes, removal of an electron from these metal-thiolate complexes is not well represented by an increase in the formal oxidation state of the metal, nor by simple oxidation of the sulfur, but instead is a variable mix of metal and sulfur content in the highest occupied orbital.     

Reaction of cyanamide and their derivatives with (η-C5H5)Mn(CO)3 and (η-C5H4CH3)Mn(CO)3

The reaction of cyanamide and its derivatives with the (η⁵-C₅H₅)Mn(CO)₂(THF) and (η⁵-C₅H₄CH₃)Mn(CO)₂(THF) complexes affords the cyanamide substituted complexes of types (η⁵-C₅H₅)Mn(CO)₂(NCN(R′)(R″)) (2a-d) and (η⁵-C₅H₄CH₃)Mn(CO)₂(NCN(R′)(R″)) (3a-e). All complexes were characterized by spectroscopy (¹H, ¹³C NMR, IR), elemental and mass spectroscopy analysis. Complex 2b (η⁵-C₅H₅)Mn(CO)₂(NCN(CH₃)₂) was additionally examined by single crystal X-ray structure determination.     

Five-coordinate gold(III) complexes of the Kläui ligands [(η-C5H5)Co{P(O)(OR)2}3] (R = Me, Et)

The reactions of cycloaurated gold(III) dichloride complexes [LAuCl₂] (L = 2-C₆H₄CH₂NMe₂ or 2-C₆H₄PPh₂NPh) with monoanionic tripodal oxygen donor Kläui ligands [(η⁵-C₅H₅)Co{P(O)(OR)₂}₃]⁻ (R = Me or Et) results in the formation of cationic gold(III) salts [LAu{OP(OR)₂}₃Co(η⁵-C₅H₅)]⁺. An X-ray structure determination on [(2-C₆H₄PPh₂NPh)Au{OP(OR)₂}₃Co(η⁵-C₅H₅)]BF₄ shows that the Kläui ligand coordinates strongly to the gold through two oxygen atoms, and weakly through the third, giving the gold(III) a distorted square pyramidal geometry. This is the first structurally characterised example of this geometry for gold(III) with ligands other than those containing rigid bipyridine or phenanthroline backbones. In solution at room temperature there is rapid interchange (on the NMR timescale) between the oxygen atoms of the Kläui ligands, which is frozen out on cooling.     

Oxidation of [Ir(η-C5Me5)(C3S5)] [C3S5 = 4,5-disulfanyl-1,3-dithiole-2-thionate(2−)] and X-ray crystal structure of [IrBr(η-C5Me5)(μ-C2S4)IrBr(η-C5Me5)]

[Ir(η⁵-C₅Me₅)(C₃S₅)] [C₃S₅²⁻ = 4,5-disulfanyl-1,3-dithiole-2-thionate(2−)] was prepared by a reaction of [NMe₄]₂[C₃S₅] with [Ir(η⁵- C₅Me₅)Cl₂]₂ in ethanol. It was reacted with bromine to afford a paramagnetic species [IrBr(η⁵-C₅Me₅)(C₃S₅)] with the Ir-Br bond and in the one-electron-oxidized state, and a diamagnetic dinuclear species [IrBr(η⁵-C₅Me₅)(μ-C₂S₄)IrBr(η⁵-C₅Me₅)]. ESR spectra for the one-electron-oxidized species in solution are discussed. The X-ray crystal structural analysis for the latter complex revealed the geometry consisting of dinuclear IrBr(η⁵-C₅Me₅) moieties bridged by the C₂S₄²⁻ ligand.     

A facile reaction of bibenzyl trisulfide with [(η-C5H5)Cr(CO)3]2: formation of a thiolato-bridged dichromium complex of [CpCr(CO)2(SBz)]2 (Bz = PhCH2-)

The reaction of [CpCr(CO)₃]₂ (Cp = η⁵-C₅H₅) (1) with an equivalent of Bz₂S₃ at ambient temperature gave [CpCr(CO)₂]₂S (3) [L.Y. Goh, T.W. Hambley, G.B. Robertson, Organometallics 6 (1987) 1051], novel complexes of [CpCr(CO)₂(SBz)]₂ (4) and together with [CpCr(SBz)]₂S (5) as main products. Thermolytic studies showed that 4 underwent complete decarbonylation to give [CpCr(SBz)]₂S (5). Final thermal decomposition of 3 and 5 eventually yielded Cp₄Cr₄S₄ (6) (Goh et al., 1987) after prolonged reaction at 100 °C. However, the reaction of [CpCr(CO)₂]₂ (CrCr) (2) with Bz₂S₃ was much slower at ambient temperature which required 72 h to complete eventually yielding 3 and 5. All the products have been characterized by elemental and spectral analyses. 4 has been structurally determined.     

Reactions of the pentamethylcyclopentadienyl trisulfido tungsten with M′Cl2 (M′ = Zn, Cd, Hg): Isolation and structural characterization of [PPh4][(η-C5Me5)WS3(ZnCl2)] and [{(η-C5Me5)WS3}2Hg]

Reactions of [PPh₄][(η⁵-C₅Me₅)WS₃] with equimolar M′Cl₂ (M′ = Zn, Cd) in MeCN or 0.5 equiv. of HgCl₂ in DMF afforded two binuclear clusters [PPh₄][(η⁵-C₅Me₅)WS₃(M′Cl₂)] (1: M′ = Zn; 2: M′ = Cd) and one trinuclear cluster [{(η⁵-C₅Me₅)WS₃}₂Hg] (3). Compounds 1-3 were characterized by elemental analysis, IR, UV-Vis, ¹H NMR and X-ray crystallography. Compound 1 may be viewed as a 1:1 composite of [PPh₄][(η⁵-C₅Me₅)WS₃] and ZnCl₂, in which one [(η⁵-C₅Me₅)WS₃]⁻ anion binds a ZnCl₂ moiety via two μ-S atoms. In the structure of 3, two [(η⁵-C₅Me₅)WS₃]⁻ anions coordinate the central Hg atom via two μ-S atoms, forming an unique bent linear structure. In addition, internal redox reactions of [PPh₄][(η⁵-C₅Me₅)WS₃] under the presence of M′Cl₂ (M′ = Zn, Cd, Hg) in high concentrations were discussed.     

First crystallographic determination of dichloro-bridged dinuclear rhodium Cp* complex with neutral Me2CO molecules. [Rh2(Cp*)2(μ-Cl)2(Me2CO)2](BF4)2 (Cp* = η-C5Me5)

The single crystals of dichloro-bridged dinuclear Rh-Cp* complex with neutral Me₂CO molecules, [Rh₂(Cp*)₂(μ-Cl)₂(Me₂CO)₂](BF₄)₂ (Cp* = η⁵-C₅Me₅), was isolated and the structure was in first determined crystallographically.     

Syntheses and structural analyses of chiral rhenium containing amines of the formula (η-C5H5)Re(NO)(PPh3)((CH2)nNRR′) (n = 0, 1)

The reaction of the racemic chiral methyl complex (η⁵-C₅H₅)Re(NO)(PPh₃)(CH₃) (1) with CF₃SO₃H and then NH₂CH₂C₆H₅ gives [(η⁵-C₅H₅)Re(NO)(PPh₃)(NH₂CH₂C₆H₅)]⁺ ([4a-H]⁺; 73%), and deprotonation with t-BuOK affords the amido complex (η⁵-C₅H₅)Re(NO)(PPh₃)(NHCH₂C₆H₅) (76%). Reactions of 1 with Ph₃C⁺ X⁻ and then primary or secondary amines give [(η⁵-C₅H₅)Re(NO)(PPh₃)(CH₂NHRR′)]⁺ X⁻ ([6-H]⁺ X⁻; R/R′/X = a, H/NH₂CH₂C₆H₅/BF₄; a′, H/NH₂CH₂C₆H₅/PF₆; b, H/NH₂CH₂(CH₂)₂CH₃/PF₆; c, H/(S)-NH₂CH(CH₃)C₆H₅/BF₄); d, CH₂CH₃/CH₂CH₃/PF₆; e, CH₂(CH₂)₂CH₃/CH₂(CH₂)₂CH₃/PF₆; f, CH₂C₆H₅/CH₂C₆H₅/PF₆; g, -CH₂(CH₂)₂CH₂-/PF₆; h, -CH₂(CH₂)₃CH₂-/PF₆; i, CH₃/CH₂CH₂OH/PF₆ (62-99%). Deprotonations with t-BuOK afford the amines (η⁵-C₅H₅)Re(NO)(PPh₃)(CH₂NRR′) (6a-i; 99-40%), which are more stable and isolated in analytically pure form when R ≠ H. Enantiopure 1 is used to prepare (R_ReS_C)-[6c-H]⁺, (R_ReS_C)-6c, (S)-[6g-H]⁺, and (S)-6g. The crystal structures of [4a-H]⁺, a previously prepared NH₂CH₂Si(CH₃)₃ analog, [6a′,d,f,h-H]⁺, (R_ReS_C)-6c, and 6f are determined and analyzed in detail, particularly with respect to cation/anion hydrogen bonding and conformation. In contrast to analogous rhenium containing phosphines, 6a-i show poor activities in reactions that are catalyzed by organic amines.     

Thiotungstates containing the syn-[W2(O/S)2(μ-S)2] (E = O, S) and cuboidal [W2Cu2(μ3-S)4] cores

Reaction of [W^VIS₄]²⁻ with ethane-1,2-dithiol edtH₂ in the presence of the sulfide scavenger Cd²⁺ yielded the dinuclear tungstate syn-[{(edt)W^V(O/S)}₂(μ-S)₂]²⁻ (1), with the terminal S/O disordered over the two tungsten sites in the ratio 0.8:02. In the presence of thiocyanate, phosphine and CuI, the anionic cuboidal clusters of composition [{(SCN)₃W^V}₂{Cu^I(PPh₃)}₂(μ₃-S)₄]²⁻ (2) and (3, diphos = 1,2-bis(o-diphenylphosphinophenyl)ethane), and possibly via an intermediate [{(SCN)₃W^VS}₂(μ-S)₂]⁴⁻. The crystal and molecular structures of [Et₄N]₂1, [Et₄N]₂2 · H₂O and [Et₄N]₂3 · H₂O have been determined.     

Oxidative addition of thiols to (CO)3Mo(μ-dppm)2Ru(CO)3 with formation of hydrido, bridged-thiolate complexes (dppm = Ph2PCH2PPh2)

The room temperature reactions of RSH (R = Et, Ph) with (CO)₃Mo(μ-dppm)₂Ru(CO)₃ (1) in toluene yield (CO)₂Mo(μ-SR)(μ-CO)(μ-dppm)₂Ru(H)(CO) [R = Et (3); Ph (4)], which are characterized by elemental analysis, ¹H NMR and IR spectroscopies and, in the case of 3, by X-ray crystallography. The complexes contain a trans,trans-Mo(μ-dppm)₂Ru unit with a bridging thiolate, a terminal hydride at the Ru, three terminal CO ligands (two at the Mo, and one at the Ru), and one semi-bridged CO closer to the Mo.     

Crystal and molecular structures of {Cu(μ-CCPh)(triphos)}2 [triphos = (PPh2CH2)3CMe]

The binuclear complex {Cu(μ-CCPh)(triphos)}₂ [triphos = (PPh₂CH₂)₃CMe] has been obtained from a reaction between {Cu(CCPh)}_n and triphos. The two copper atoms are bridged unsymmetrically by two CCPh groups, each attached through one carbon only [Cu-C, 2.016(4) Å], the separation between the two coppers being 2.4663(8) Å. Only two of the three phosphorus atoms in each ligand are coordinated to copper [Cu-P(1,2) 2.281, 2.273(1) Å]. The observed structure may be rationalised using a recent theoretical study [C. Mealli, S.S.M.C. Godinho, M.J. Calhorda, Organometallics 20 (2001) 1734] and differs from that assumed for the rationalisation of its luminescence properties [V. Pawlowski, G. Knör, C. Lennartz, A. Vogler, Eur. J. Inorg. Chem. (2005) 3167].     

Synthesis, protonation and electrochemical properties of trinuclear NiFe2 complexes Fe2(CO)6(μ3-S)2[Ni(Ph2PCH2)2NR] (R = n-Bu, Ph) with an internal pendant nitrogen base as a proton relay

Two trinuclear NiFe₂ complexes Fe₂(CO)₆(μ₃-S)₂[Ni(Ph₂PCH₂)₂NR] (R = n-Bu, 1; Ph, 2) containing an internal base were prepared as biomimetic models for the active sites of FeFe and NiFe hydrogenases. Treatment of complex Fe₂(CO)₆(μ₃-S)₂[Ni(Ph₂PCH₂)₂N(n-Bu)] (1) with HOTf gave an N-protonated complex [Fe₂(CO)₆(μ₃-S)₂{Ni(Ph₂PCH₂)₂NH(n-Bu)}][OTf] ([1H][OTf]). The structures of complexes 1, 2 and [1H][OTf] were determined by X-ray crystallography, which shows that the proton held by the N atom of [1H][OTf] lies in an equatorial position. Cyclic voltammograms of complexes 1 and [1H][OTf] were studied and compared with that of Fe₂(CO)₆(μ₃-S)₂[Ni(dppe)].     

Syntheses and crystal structures of the first iridium complexes with m- and p-terphenyl (tp). {[Ir2(p-tp)(cod)2](BF4)2 · 2CH2Cl2}3 and [Ir(m-tp)(η-C5Me5)](BF4)2

Novel two iridium terphenyl complexes were prepared and their structures were characterized crystallographically. The reaction of [Ir(cod)₂]BF₄ with p-terphenyl (p-tp) in CH₂Cl₂ was carried out to afford dinuclear Ir(I) complex {[Ir₂(p-tp)(cod)₂](BF₄)₂ · 2CH₂Cl₂}₃ (cod=1,5-cyclooctadiene) (1 · 2CH₂Cl₂), whereas the reaction of the intermediate [Ir(η⁵-C₅Me₅)(Me₂CO)₃]³⁺ in Me₂CO with m-terphenyl (m-tp) was done to provide mononuclear Ir(III) complex [Ir(m-tp)(η⁵-C₅Me₅)](BF₄)₂ (2). In complex 1 · 2CH₂Cl₂, two Ir atoms are η⁶-coordinated to both sides of terminal benzene rings from the upper and lower sides in the p-tp ligand, while one Ir atom is η⁶-coordinated to one side of the terminal benzene ring in the m-tp ligand in complex 2. Each crystal structure describes the first coordination mode found in metal complexes with the m- and p-tp ligands.     

Photochemical displacement of the benzene ligand in [(η-C6H6)Ru(CH3CN)2(L)] and [(η-C6H6)Ru(CH3CN)(L2)] (L=CH3CN, PPh3, L2=dppe, bipy)

Photoirradiation with a 150 W medium-pressure Hg lamp for 17 h in acetontrile as the solvent replaces the benzene ligand in the cationic complexes [(η⁶-C₆H₆)Ru(CH₃CN)₂(L)]²⁺ and [(η⁶-C₆H₆)Ru(CH₃CN)(L₂)]²⁺ (L=CH₃CN, PPh₃, L₂=dppe, bipy) with acetonitrile. These replacements are equally clean to those reported before for analogous CpRu⁺ complexes. Crystal structures of the products obtained are included.     

Oxidative nuclease activity of ferromagnetically coupled μ-hydroxo-μ-propionato copper(II) complexes [Cu3(L)2(μ-OH)2(μ-propionato)2] (L = N-(pyrid-2-ylmethyl)R-sulfonamidato, R = benzene, toluene, naphthalene)

Three doubly-bridged, trinuclear copper(II) compounds with hydroxo and carboxylato bridges, ^∞₁[Cu₃(L1)₂(μ-OH)₂(μ-propionato)₂](1), [Cu₃(L2)₂(μ-OH)₂(μ-propionato)₂(DMF)₂] (2) and ^∞₁{[Cu₃(L3)₂(μ-OH)₂(μ-propionato)₂]} [Cu₃(L3)₂(μ-OH)₂(μ-propionato)₂(DMF)₂]} (3) [HL1 = N-(pyrid-2-ylmethyl)benzenesulfonylamide, HL2 = N-(pyrid-2-ylmethyl)toluenesulfonylamide, HL3 = N-(pyrid-2-ylmethyl)naphthalenesulfonylamide], have been synthesized and characterized. 1 is built from [Cu₃(L1)₂(μ-OH)₂(μ-propionato)₂] clusters. Each unit contains three copper(II) with two different coordination environments: the terminal centers are square-base pyramidal whereas the central copper is square planar. 2 presents a similar square-base pyramidal geometry in the terminal centers, but the central copper is six-coordinate. 3 shows an unusual 1D coordination polymer comprised of two distinct building blocks: one similar to that found in 1 and the other similar to that found in 2. The magnetic susceptibility measurements (2-300 K) reveal a ferromagnetic interaction between the Cu(II) ions with J values of 76.0, 55.0, and 48.0 cm⁻¹ for 1, 2, and 3, respectively. Emission spectroscopy, thermal denaturation, viscosimetry and cyclic voltammetry show an interaction of the complexes with DNA through the sugar-phosphate backbone. All three Cu(II) complexes were found to be very efficient agents of plasmid DNA cleavage in the presence of ascorbato or mercaptopropionic acid. Both the kinetics and the mechanism of the cleavage reaction have also been examined.     

Synthesis, crystal structures, and spectroscopic characterization of the neutral monomeric tetrahedral [M(Diap)2(OAc)2] · H2O complexes (M = Zn,Cd; Diap = 1,3-diazepane-2-thione; OAc = acetate) with N-H?O and O-H?O intra- and intermolecular hydrogen bonding interactions

The title complexes, [M(Diap)₂(OAc)₂] · H₂O (M = Zn,Cd; Diap = 1,3-diazepane-2-thione; OAc = acetate) with an MO₂S₂ configuration, have been characterized by X-ray crystallography as well as FT-IR, ¹H and ¹³C NMR spectroscopy. In these complexes, the metal atoms lie in a pseudo-tetrahedral environment and are coordinated by the thione sulfur atoms of two neutral 1,3-diazepane-2-thione ligands and one oxygen atom from each of two monodentate acetate anions. In both complexes, there are two intramolecular N-H?O hydrogen bonds, each being between one NH group of a Diap ligand and the uncoordinated O atom of an OAc ligand. The water molecule is also involved in hydrogen bonds, as an acceptor and as a donor twice, linking together three symmetry-related complexes. The Cd complex undergoes a structural phase transition from a monoclinic form at 150 K with Z′ = 2 to a smaller monoclinic cell at room temperature with Z′ = 1 without loss of crystallinity. The Zn complex does not exhibit an equivalent phase transition, and at 150 K is isostructural with the room-temperature form of the Cd complex. All three crystallographically independent molecules found for the Cd complex (two at low temperature and one at room temperature) have essentially the same structure except for small changes in the conformations of the ligands. Tetrahedral coordination with monodentate carboxylate ligands is common for Zn complexes of this kind, but is unusual for Cd complexes, and is the result of the bulky Diap ligands.     

A novel tetranuclear hydrogenphosphate-bridged Cu(II) cluster. Synthesis, structure, spectroscopy and magnetism of [Cu4(dpyam)4(μ4,η-HPO4)2(μ-X)2]X2(H2O)6 (X = Cl, Br)

Two novel tetranuclear compounds with an unprecedented mode of a hydrogenphosphato bridge, [Cu₄(dpyam)₄(μ₄,η³-HPO₄)₂(μ-X)₂]²⁺ (in which dpyam = di-2-pyridylamine and X = Cl (1), Br (2)) have been synthesised and characterised structurally and magnetically. The Cu(II) ions in the structures each display a square-pyramidal geometry, with two tridentate hydrogenphosphato groups bridging four copper atoms in a μ₄,η³ coordination mode which is rarely found in hydrogenphosphate metal compounds. Each (different) pair of Cu(II) ions is additionally bridged by halide ions, with relatively long Cu-X distances (2.551(3)-2.604(3) Å for 1 and 2.707(1)-2.766(2) Å for 2) and subsequently also a small Cu-X-Cu angle (65.7(1)° and 65.1(1)° for 1 and 61.6(1)° and 62.4(1) for 2) and a large Cu-X-Cu angle (95.5(1)° and 96.5(1)° for 1 and 91.1(1)° and 92.6(1)° for 2). Cu?Cu distances in the tetranuclear units varies from 2.802(3) to 5.232(3) Å for 1 and from 2.834(1) to5.233(1) Å in 2. The lattice structures are stabilised by extensive intermolecular hydrogen bonds. The magnetic susceptibility measurements down to 5 K revealed a weak ferromagnetic interaction between the outer pairs of Cu(II) ions which vary from 22 to 46 cm⁻¹ in 1 and 12 to 33 cm⁻¹ in 2 and a moderately strong antiferromagnetic interaction between the inner Cu(II) ions of −79 cm⁻¹ in 1 and −83 cm⁻¹ in 2, via the Cu-O-P-O-Cu pathway.     

Theoretical studies of the spectroscopic properties of (L)Pt [(1,2-η)-Ph-(CC)n-Ph] (L = dppp or (PPh3)2, n = 1 or 2)

Electronic structures and spectroscopic properties of (L)Pt[(1,2-η²)-Ph-(CC)_n-Ph] (n = 1, L = (PPh₃)₂ (1), n = 1, L = dppp (2), and n = 2, L = (PPh₃)₂ (3)) are studied by the ab initio and DFT methods, respectively. The ground- and excited-state structures are optimized by the B3LYP and CIS methods, respectively. The calculated bond lengths and bond angles in the ground-state agree well with the corresponding experimental values and the structures in the ground and excited-states have only slightly change. At the TD-DFT level with the PCM model, the absorption and emission spectra in solution are obtained. The lowest-energy absorptions of 1-3 are attributed to the mixing MLCT/ILCT transitions and phosphorescent emissions are attributed to coming from the combination of ³MLCT/³ILCT transitions. Furthermore, the lowest-energy absorptions and emissions of 1-3 are red-shifted in the order 1 < 2 < 3. It is shown that with the increase of the π-conjugated effect of alkyne or electron-donating ability of the phosphane atom, lowest-energy emission energy for 1-3 is correspondingly decreased.     

Actinide complexes with the Kläui tripodal oxygen ligand - crystal structure of [{η-C5H5(CH2C(CH3)3)}Co{P(O)(OC2H5)2}3]2U

Reaction between [(C₅H₅)Co{P(O)(OEt)₂}₃]₂UCl₂ and neopentyl lithium affords the novel complex, [{η⁴-C₅H₅(CH₂C(CH₃)₃)}Co{P(O)(OEt)₂}₃]₂U, in which the uranium metal center has been dehalogenated and the neopentyl nucleophiles have attacked the cyclopentadienyl groups on the Kläui ([(C₅H₅)Co{P(O)(OEt)₂}₃]⁻) ligands. The uranium atom in the title compound possesses octahedral geometry defined by the oxygen atoms from two sets of tripodal oxygen ligands, while the cyclopentadienyl ligands are bound η⁴ to the cobalt atoms. The formation of this complex suggests that the Kläui ligand may not be a suitable ligand framework for supporting organometallic complexes of oxophilic early actinides.     

Synthesis, spectroscopic and electrochemical characterization of water soluble [(η-C5H5)2Mo(thionucleobase/thionucleoside)]Cl2 complexes

A series of water soluble molybdenocene complexes of general formula [(η⁵-C₅H₅)₂Mo(L)]Cl₂ (L=6-mercaptopurine (2), 6-mercaptopurine ribose (3), 2-amino-6-mercaptopurine (4), 2-amino-6-mercaptopurine ribose (5)) have been prepared by reacting Cp₂MoCl₂ (1) with the corresponding thionucleobase/thionucleoside in a (2:1) THF/MeOH solvent mixture. The complexes have been characterized by spectroscopic methods (NMR, UV-Vis, IR and MS). ¹H NMR spectroscopic data (DMSO-d₆) on the complexes suggest a S-Mo-N(7) coordination by the thionucleobase/thionucleoside. In buffer solution NMR data suggest that the thionucleobase/thionucleoside remains coordinated to molybdenum probably through S(6) and assisted by either N(7) or N(1) atoms. Intermediate species such as [Cp₂Mo(η¹-L)(H₂O)]^2+/1+ where the L is acting as monodentate ligand are possible in solution. Electrochemical characterization has also been pursued by cyclic voltammetry in DMSO and buffer solution. In DMSO, the complexes including the molybdenocene dichloride exhibit reversible redox behavior. On the other hand, in buffer solution, the oxidation process is irreversible for all the species.