Microcalorimetric study on the phase behaviour of Slayer coated liposomes

Isolated S-layer subunits from Bacillus coagulans E38-66/v1 were recrystallized on positively charged, unilamellar liposomes composed of dipalmitoylphosphatidylcholine, cholesterol and hexadecylamine. The thermotropic phase behaviour of S-layer coated and uncoated liposomes was characterized by differential scanning microcalorimetry indicating for both preparations a broad transition around 50°C due to the chain-melting from a liquid-ordered gel-like to a liquid-ordered fluid phase as described for phosphatidylcholine cholesterol mixtures. The slightly higher phase transition temperature for the S-layer coated liposomes was explained by increased intermolecular order. Cross-linking the S-layer subunits covalently to hexadecylamine with glutaraldehyde induced phase separation within the liposomes. Based on deconvolution of the normalized excess heat capacity functions it was proposed that the different lipid domains arise from phospholipids representing different degrees of mobility.     

S-layer-coated liposomes as a versatile system for entrapping and binding target molecules

In the present study, unilamellar liposomes coated with the crystalline bacterial cell surface layer (S-layer) protein of Bacillus stearothermophilus PV72/p2 were used as matrix for defined binding of functional molecules via the avidin- or streptavidin-biotin bridge. The liposomes were composed of dipalmitoyl phosphatidylcholine, cholesterol and hexadecylamine in a molar ratio of 10:5:4 and they had an average size of 180 nm. For introducing specific functions into the S-layer lattice without affecting substances encapsulated within the liposomes, crosslinking and activation reagents had to be identified which did not penetrate the liposomal membrane. Among different reagents, a hydrophilic dialdehyde generated by periodate cleavage of raffinose and a sulfo-succinimide activated dicarboxylic acid were found to be impermeable for the liposomal membrane. Both reagents completely crosslinked the S-layer lattice without interfering with its regular structure. Biotinylation of S-layer-coated liposomes was achieved by coupling p-diazobenzoyl biocytin which preferably reacts with the phenolic residue of tyrosine or with the imidazole ring of histidine. By applying this method, two biotin residues accessible for subsequent avidin binding were introduced per S-layer subunit. As visualized by labeling with biotinylated ferritin, an ordered monomolecular layer of streptavidin was formed on the surface of the S-layer-coated liposomes. As a second model system, biotinylated anti-human IgG was attached via the streptavidin bridge to the biotinylated S-layer-coated liposomes. The biological activity of the bound anti-human IgG was confirmed by ELISA.     

Characterization of liposomes coated with S-layer proteins from lactobacilli

The stability of liposomes coated with S-layer proteins from Lactobacillus brevis and Lactobacillus kefir was analyzed as a previous stage to the development of a vaccine vehicle for oral administration. The interactions of the different S-layer proteins with positively charged liposomes prepared with soybean lecithin or dipalmitoylphosphatidylcholine were studied by means of the variation of the Z potential at different protein-lipid ratios, showing that both proteins were able to attach in a greater extent to the surface of soybean lecithin liposomes. The capacity of these particles to retain carboxyfluorescein or calcein by exposure to bile salts, pancreatic extract, pH change and after a thermal shock showed that both S-layer proteins increased the stability of the liposomes in the same magnitude. The non-glycosylated protein from L. brevis protects more efficiently the liposomes at pH 7 than those from L. kefir even without treatment with glutaraldehyde.     

Characterization of liposomes coated with S-layer proteins from lactobacilli

The stability of liposomes coated with S-layer proteins from Lactobacillus brevis and Lactobacillus kefir was analyzed as a previous stage to the development of a vaccine vehicle for oral administration. The interactions of the different S-layer proteins with positively charged liposomes prepared with soybean lecithin or dipalmitoylphosphatidylcholine were studied by means of the variation of the Z potential at different protein-lipid ratios, showing that both proteins were able to attach in a greater extent to the surface of soybean lecithin liposomes. The capacity of these particles to retain carboxyfluorescein or calcein by exposure to bile salts, pancreatic extract, pH change and after a thermal shock showed that both S-layer proteins increased the stability of the liposomes in the same magnitude. The non-glycosylated protein from L. brevis protects more efficiently the liposomes at pH 7 than those from L. kefir even without treatment with glutaraldehyde.     

Large-scale recrystallization of the S-layer of Bacillus coagulans E38-66 at the air/water interface and on lipid films.

S-layer protein isolated from Bacillus coagulans E38-66 could be recrystallized into large-scale coherent monolayers at an air/water interface and on phospholipid films spread on a Langmuir-Blodgett trough. Because of the asymmetry in the physiochemical surface properties of the S-layer protein, the subunits were associated with their more hydrophobic outer face with the air/water interface and oriented with their negatively charged inner face to the zwitterionic head groups of the dipalmitoylphosphatidylcholine and dipalmitoylphosphatidylethanolamine (DPPE) monolayer films. The dynamic crystal growth at both types of interfaces was first initiated at several distant nucleation points. The individual monocrystalline areas grew isotropically in all directions until the front edge of neighboring crystals was met. The recrystallized S-layer protein and the S-layer-DPPE layer could be chemically cross-linked from the subphase with glutaraldehyde.     

Relevance of charged groups for the integrity of the S-layer from Bacillus coagulans E38-66 and for molecular interactions.

In this paper, the importance of charged amino and carboxyl groups for the integrity of the cell surface layer (S-layer) lattice from Bacillus coagulans E38-66 and for the self-assembly of the isolated subunits was investigated. Amidination of the free amino groups which preserved their positive net charge had no influence on both. On the other hand, acetylation and succinylation, which converted the amino groups into either neutral or negatively charged groups, and amidation of carboxyl groups were accompanied by the disintegration or at least by the loss of the regular structure of the S-layer lattice. Treatment of S-layer monolayers with the zero-length cross-linker carbodiimide led to the introduction of peptide bonds between activated carboxyl groups and amino groups from adjacent subunits. This clearly indicated that in the native S-layer lattice the charged groups are located closely enough for direct electrostatic interactions. Under disrupting conditions in which the S-layer polypeptide chains were unfolded, 58% of the Asx and Glx residues could be amidated, indicating that they occur in the free carboxylic acid form. As derived from chemical modification of monolayer self-assembly products, about 90% of the lysine and 70% of the aspartic and glutamic acid residues are aligned on the surface of the S-layer protein domains. This corresponded to 45 amino groups and to 63 carboxyl groups per S-layer subunit. Labelling experiments with macromolecules with different sizes and charges and adsorption studies with ion-exchange particles revealed a surplus of free carboxyl groups on the inner and on the outer faces of the S-layer lattice. Since the carboxyl groups on the outer S-layer face were accessible only for protein molecules significantly smaller then the S-layer protomers or for positively charged, thin polymer chains extending from the surface of ion-exchange beads, the negatively charged sites must be located within indentations of the corrugated S-layer protein network. This was in contrast to the carboxyl groups on the inner S-layer face, which were found to be exposed on elevations of the S-layer protein domains (D. Pum, M. Sára, and U.B. Sleytr, J. Bacteriol. 171:5296-5303, 1989).     

Influence of liposome charge on the association of liposomes with Kupffer cells in vitro. Effects of divalent cations and competition with latex particles

We studied the interaction of large unilamellar liposomes carrying different surface charges with rat Kupffer cells in maintenance culture. In addition to 14C-labeled phosphatidylcholine, all liposome preparations contained either 3H-labeled inulin or 125I-labeled bovine serum albumin as a non-degradable or a degradable aqueous space marker, respectively. With vesicles carrying no net charge, intracellular processing of internalized liposomes caused nearly complete release of protein label into the medium in acid-soluble form, while phospholipid label was predominantly retained by the cells, only about one third being released. The presence of the lysosomotropic agent, ammonia, inhibited the release of both labels from the cells. At 4 degrees C, the association and degradation of the vesicles were strongly reduced. These results are very similar to what we reported on negatively charged liposomes (Dijkstra, J., Van Galen, W.J.M., Hulstaert, C.E., Kalicharan, D., Roerdink, F.H. and Scherphof, G.L. (1984) Exp. Cell Res. 150, 161-176). The interaction of both types of vesicles apparently proceeds by adsorption to the cell surface followed by virtually complete internalization by endocytosis. Similar experiments with positively charged vesicles indicated that only about half of the liposomes were taken up by the endocytic route, the other half remaining adsorbed to the cell-surface. Attachment of all types of liposomes to the cells was strongly dependent on the presence of divalent cations; Ca2+ appeared to be required for optimal binding. Neutral liposomes only slightly competed with the uptake of negatively charged vesicles, both at 4 degrees and 37 degrees C, whereas negatively charged small unilamellar vesicles and negatively charged latex beads were found to compete very effectively with the large negatively charged liposomes. Neutral vesicles competed effectively for uptake with positively charged ones. These results suggest that neutral and positively charged liposomes are largely bound by the same cell-surface binding sites, while negatively charged vesicles attach mainly to other binding sites.     

Permeability and charge-dependent adsorption properties of the S-layer lattice from Bacillus coagulans E38-66.

We investigated the permeability properties of the oblique S-layer lattice from Bacillus coagulans E38-66 after depositing cell wall fragments on a microfiltration membrane, cross-linking the S-layer protein with glutaraldehyde, and degrading the peptidoglycan with lysozyme. Comparative permeability studies on such multilayered S-layer membranes and suspended S-layer vesicles from thermophilic members of the family Bacillaceae with use of the space technique (M. Sára and U. B. Sleytr, J. Bacteriol. 169:4092-4098, 1987) revealed identical molecular exclusion limits (M. Sára and U. B. Sleytr, J. Membr. Sci. 33:27-49, 1987). Examination of the S-layer lattice from B. coagulans E38-66 with the S-layer membrane technique revealed unhindered passage for molecules up to the size of myoglobin (M(r) 17,000). The molecular dimensions of this protein (2.8 by 3.2 by 4.5 nm) correspond approximately to the size of the ovoid-shaped pore previously shown by high-resolution electron microscopy of negatively stained S-layer self-assembly products (D. Pum, M. Sára, and U. B. Sleytr, J. Bacteriol. 171:5296-5303, 1989). Chemical modification of the S-layer protein and comparative labeling, adsorption, and permeability studies clearly demonstrated that (i) in the native state, free amino and carboxyl groups are present on the outer S-layer face and in the interior of the pores and (ii) electrostatic interactions between these groups prevent unspecific adsorption of the S-layer in vivo.     

Affinity cross-flow filtration: purification of IgG with a novel protein a affinity matrix prepared from two-dimensional protein crystals

In this article, we describe the use of 1- to 2-mum sized affinity microparticles for the isolation and purification of IgG from artificial IgG-human serum albumin mixtures and clarified hybridoma cell culture supernatants by affinity cross-flow filtration. Affinity microparticles were prepared from cell wall fragments of Clostridium thermohydrosulfuricum L111-69, in which the peptidoglycan-containing layer was completely covered with a hexagonally ordered S-layer lattice. After crosslinking the S-layer protein with glutaraldehyde, carboxyl groups from acidic amino acids were activated with carbodiimide and used for immobilization of Protein. A. Quantitative determination confirmed that Protein A molecules formed a monomolecular layer on the outermost surface of the S-layer lattice. Affinity microparticles were found to withstand high centrifugal and shear forces and revealed no Protein A leakage or S-layer protein release under cross-flow conditions between pH 2 to 12. The IgG-binding capacity of affinity microparticles was investigated under crossflow conditions and compared with that obtained in batch adsorption processes. (c) 1994 John Wiley & Sons, Inc.     

Interaction of S-layer proteins of Lactobacillus kefir with model membranes and cells

In previous works, it was shown that S-layer proteins from Lactobacillus kefir were able to recrystallize and stabilize liposomes, this feature reveling a great potential for developing liposomal-based carriers. Despite previous studies on this subject are important milestones, a number of questions remain unanswered. In this context, the feasibility of S-layer proteins as a biomaterial for drug delivery was evaluated in this work. First, S-layer proteins were fully characterized by electron microscopy, 2D-electrophoresis, and anionic exchange chromatography coupled with pulsed amperometric detection (HPAEC-PAD). Afterward, interactions of S-layer proteins with model lipid membranes were evaluated, showing that proteins adsorb to the lipid surface following a non-fickean or anomalous diffusion, when positively charged lipid were employed, suggesting that electrostatic interaction is a key factor in the recrystallization process on these proteins. Finally, the interaction of S-layer coated liposomes with Caco-2 cell line was assessed: First, cytotoxicity of formulations was tested showing no cytotoxic effects in S-layer coated vesicles. Second, by flow cytometry, it was observed an increased ability to transfer cargo molecules into Caco-2 cells from S-layer coated liposomes in comparison to control ones. All data put together, supports the idea that a combination of adhesive properties of S-layer proteins concomitant with higher stability of S-layer coated liposomes represents an exciting starting point in the development of new drug carriers.     

Membrane fusion between liposomes composed of acidic phospholipids and neutral phospholipids induced by melittin: a differential scanning calorimetric study

Melittin-induced membrane fusion between neutral and acidic phospholipids was examined in liposome systems with a high-sensitivity differential scanning calorimeter. Membrane fusion could be detected by calorimetric measurement by observing thermograms of mixed liposomal lipids. The roles of hydrophobic and electrostatic interactions were investigated in membrane fusion induced by melittin. Melittin, a bee venom peptide, is composed of a hydrophobic region including hydrophobic amino acids and a positively charged region including basic amino acids. When phosphatidylcholine liposomes were prepared in the presence of melittin, reductions in the phase transition enthalpies were observed in the following order; dimyristoylphosphatidylcholine (DMPC) > dipalmitoylphosphatidylcholine (DPPC) > distearoylphosphatidylcholine (DSPC) > dielaidoylphosphatidylcholine (DEPC). The plase transition enthalpy of an acidic phospholipid, dipalmitoylphosphatidylserine (DPPS), was raised by melittin at low concentrations, then reduced at higher concentrations. DPPC liposomes prepared in melittin solution were fused with DPPS liposomes when the liposomal dispersions were mixed and incubated. Similar fusion was observed between dipalmitoylphosphatidylcholine and dimyristoylphosphatidic acid (DMPA) liposomes. These results indicate that a peptide including hydrophobic and basic regions can mediate membrane fusion between neutral and acidic liposomes by hydrophobic and electrostatic interactions.     

Dye permeability at phase transitions in single and binary component phospholipid bilayers

By encapsulating a pH-sensitive dye, phenol red, in multilamellar liposomes of DMPC, DPPC and DMPC/DPPC mixtures, the permeability of these phospholipid bilayers to dye as a function of temperature has been studied. For both DMPC and DPPC liposomes, dye release begins well below the main gel-to-liquid-crystalline phase transition (24°C and 42°C, respectively) at temperatures corresponding to the onset of the pretransition (about 14°C and 36°C, respectively) with DPPC liposomes exhibiting a permeability anomaly at the main phase transition (42°C). The perturbation occurring in the bilayer structure that allows the release of encapsulated phenol red (approx. 5 Å diameter) is not sufficient to permit the release of encapsulated haemoglobin (approx. 20 Å diameter, negatively charged). In liposomes composed of a range of DMPC/DPPC mixtures, dye release commences at the onset of the pretransition range (determined by optical absorbance measurements) and increases with increasing temperature until the first appearance of liquid crystalline phase after which no further dye release occurs. Interestingly, the dye retaining properties of DMPC and DPPC liposomes well below their respective pretransition temperature regions are very different: DMPC liposomes release much encapsulated dye at incubation temperatures of 5°C whilst DPPC liposomes do not.     

An S-layer heavy chain camel antibody fusion protein for generation of a nanopatterned sensing layer to detect the prostate-specific antigen by surface plasmon resonance technology

The bacterial cell surface layer (S-layer) protein of Bacillus sphaericus CCM 2177 assembles into a square lattice structure and recognizes a distinct type of secondary cell wall polymer (SCWP) as the proper anchoring structure in the rigid cell wall layer. For generating a nanopatterned sensing layer with high density and well defined distance of the ligand on the outermost surface, an S-layer fusion protein incorporating the sequence of a variable domain of a heavy chain camel antibody directed against prostate-specific antigen (PSA) was constructed, produced, and recrystallized on gold chips precoated with thiolated SCWP. The S-layer protein moiety consisted of the N-terminal part which specifically recognized the SCWP as binding site and the self-assembly domain. The PSA-specific variable domain of the camel heavy chain antibody was selected by several rounds of panning from a phage display library of an immunized dromedary, and was produced by heterologous expression in Escherichia coli. For construction of the S-layer fusion protein, the 3'-end of the sequence encoding the C-terminally truncated form rSbpA(31)(-)(1068) was fused via a short linker to the 5'-end of the sequence encoding cAb-PSA-N7. The S-layer fusion protein had retained the ability to self-assemble into the square lattice structure. According to the selected fusion site in the SbpA sequence, the cAb-PSA-N7 moiety remained located on the outer surface of the protein lattice. After recrystallization of the S-layer fusion protein on gold chips precoated with thiolated SCWP, the monomolecular protein lattice was exploited as sensing layer in surface plasmon resonance biochips to detect PSA.     

Development of a liposome formulation for D-cycloserine local delivery

Multilamellar liposomes loaded with D-cycloserine (D-CS) were prepared by a thin layer evaporation technique, followed by freezing and thawing cycles. Charged components and bioadhesive material, such as distearolylphosphatitylethanolamine covalently coupled with methoxypolyethyleneglycol, were used to prepare liposomes with different physico-chemical and technological properties. Negatively charged liposomes showed higher D-CS encapsulation efficiency (about 37%, w/w) than neutral and positively charged liposomes (about 5 and 17%, w/w, respectively). All formulations showed in vitro, after a burst effect, a prolonged release of the encapsulated drug. Lipid vesicles made of dipalmitoylphosphatidylcholine (DPPC) were used as a biomembrane model to evaluate in vitro the interaction of D-CS with biological membranes. Differential scanning calorimetry was used as a simple and noninvasive technique of analysis. D-CS was distributed in the aqueous compartments of liposomes for interaction with the phospholipid polar head-groups (enhancement of Delta H value). However, due to its high diffusibility the drug was also able to freely permeate through DPPC liposomes, altering during this passage the hydrophobic domains of the bilayers. Stability studies were performed at different temperatures and pH values to assay the integrity of the drug during the liposome production steps. D-CS was rapidly degraded at acidic pH, but no significant hydrolysis was observed at pH 7.4 after 7 days.     

Structure, surface charge, and self-assembly of the S-layer lattice from Bacillus coagulans E38-66.

In freeze-etched preparations, whole cells from Bacillus coagulans E38-66 exhibited an oblique S-layer lattice (a = 9.4 nm; b = 7.4 nm; gamma = 80 degrees). The three-dimensional structure of the crystalline array was characterized by optical and computer image analysis. The lattice showed two distinctly shaped types of pores. In vitro self-assembly of isolated subunits yielded flat sheets and open-ended cylinders composed of two back-to-back monolayers. Unlike whole cells, in vitro self-assembly products were capable of binding polycationized ferritin (pI, approximately 11). This showed that only the inner S-layer face adhering to the peptidoglycan-containing layer in whole cells was net negatively charged. S-layer monomers and/or oligomers were capable of generating a closed monolayer with oblique symmetry on poly-L-lysine-coated supports. The monolayer had a typical crazy paving appearance, with numerous crystal boundaries. The handedness of the oblique lattice and ability to bind polycationized ferritin revealed that the subunits had bound with the outer, not net negatively charged face to the poly-L-lysine-coated supports. Carbodiimide-activated carboxyl groups on either cell wall fragments or self-assembly products could covalently bind high-molecular-weight nucleophiles such as ferritin. This confirmed the location of negatively charged carboxyl groups on the outermost surface of both S-layer faces. The difference in pH optimum for carbodiimide activation indicated a preponderance of alpha- and beta-carboxyl groups on the inner S-layer face and a preponderance of beta- and gamma-carboxyl groups on the outer S-layer face.     

Stability of small unilamellar liposomes in serum and clearance from the circulation: The effect of the phospholipid and cholesterol components

Small unilamellar liposomes containing carboxyfluorescein (CF) and composed of various unsaturated and saturated phospholipids with or without cholesterol were incubated in the presence of mouse serum at 37°C. Liposomes composed of egg L-α-phosphatidylcholine (PC), L-α-dioleoylphosphatidylcholine (DOPC) or sphingomyelin (SM) became rapidly permeable to entrapped CF but incorporation of cholesterol into such liposomes reduced CF leakage. Under similar conditions, CF leakage from cholesterol-free liposomes composed of saturated phospholipids of increasing fatty acid chain length was dependant on the liquid-crystalline phase transition temperature (Tc) of the phospholipid component. Thus, L-α-dilaureoylphos-phatidylcholine (DLPC), L-α-dimyristoyl phosphatidylcholine (DMPC) and L-α-dipalmitoylphosphatidylcholine (DPPC) with Tc's below or near the temperature of the incubation (37°C) released CF rapidly whereas L-α-diheptedecanoyl phosphatidylcholine (DHPC), L-α-distearoylphosphatidylcholine (DSPC) and hydrogenated egg PC (HPC) liposomes with Tc's above 37°C retained the dye quantitatively. After incorporation of cholesterol into liposomes composed of saturated phospholipids, CF release was reduced for DLPC and DMPC and increased for DPPC, DSPC, DHPC and HPC vesicles. Liposomes with or without cholesterol exhibiting greatest stability (in terms of CF retention) in the presence of serum were injected intravenously into mice and rates of clearance of quenched CF from the circulation measured. Observed clearance rates were linear and, when liposomes contained tritiated phospholipid, identical to those of the radiolabel suggesting retention of liposomal integrity in the intravascular space. However, half-lifes of liposomes ranging from 0.1 to 16 h did not correlate with the physical characteristics of their phospholipid component. After intraperitoneal injection, there was quantitative entry of quenched CF (stable liposomes) into the blood from which it was eliminated at rates corresponding to those observed after intravenous injection. These results suggest that solute retention by liposomes and their half-life in the circulation can be controlled by the appropriate manipulation of liposomal membrane fluidity and composition.     

Use of regularly structured bacterial cell envelope layers as matrix for the immobilization of macromolecules

Summary Carboxyl groups present on the outer face of the hexagonally ordered S-layer lattices from Bacillus stearothermophilus PV72 and Clostridium thermohydrosulfuricum L111-69 were activated with carbodiimide. The reaction of the activated carboxyl groups with free amino groups of low molecular weight nucleophiles was controlled by labelling with polycationized ferritin, a net positively charged topographical marker for electron microscopy, which densely binds to S-layers possessing free carboxyl groups. Carbodiimide-activated carboxyl groups were also allowed to react with amino groups of ferritin (MW 440 000) and invertase (MW 270 000). Covalent attachment of ferritin was examined by electron microscopy. Using invertase, approximately 1 mg enzyme was bound per mg S-layer protein indicating a high packing density of invertase molecules on the outer face of the S-layer lattice. The immobilized invertase retained 70% of its original activity.     

S-layer-supported lipid membranes

Many prokaryotic organisms (archaea and bacteria) are covered by a regularly ordered surface layer (S-layer) as the outermost cell wall component. S-layers are built up of a single protein or glycoprotein species and represent the simplest biological membrane developed during evolution. Pores in S-layers are of regular size and morphology, and functional groups on the protein lattice are aligned in well-defined positions and orientations. Due to the high degree of structural regularity S-layers represent unique systems for studying the structure, morphogenesis, and function of layered supramolecular assemblies. Isolated S-layer subunits of numerous organisms are able to assemble into monomolecular arrays either in suspension, at air/water interfaces, on planar mono- and bilayer lipid films, on liposomes and on solid supports (e.g. silicon wafers). Detailed studies on composite S-layer/lipid structures have been performed with Langmuir films, freestanding bilayer lipid membranes, solid supported lipid membranes, and liposomes. Lipid molecules in planar films and liposomes interact via their head groups with defined domains on the S-layer lattice. Electrostatic interactions are the most prevalent forces. The hydrophobic chains of the lipid monolayers are almost unaffected by the attachment of the S-layer and no impact on the hydrophobic thickness of the membranes has been observed. Upon crystallization of a coherent S-layer lattice on planar and vesicular lipid membranes, an increase in molecular order is observed, which is reflected in a decrease of the membrane tension and an enhanced mobility of probe molecules within an S-layer-supported bilayer. Thus, the terminology 'semifluid membrane' has been introduced for describing S-layer-supported lipid membranes. The most important feature of composite S-layer/lipid membranes is an enhanced stability in comparison to unsupported membranes.     

Stabilization of liposomal membranes by thermozeaxanthins: carotenoid-glucoside esters.

Thermozeaxanthins (TZS) are novel carotenoid-glucoside esters existing in the cell membranes of the thermophilic bacterium, Thermus thermophilus. The effect of TZS on membrane permeability was studied by measuring the leakage of the fluorescent dye from calcein-entrapped large unilamellar liposomes (LUVs). The LUVs were composed of a small portion (0.2-1.0 mol%) of TZS and phosphatidylcholine (PC) of various length and saturation degree of hydrocarbon chains. Incorporation of TZS in egg PC LUVs stabilized the liposomes in the temperature range from 30 to 80 degrees C, as only 2.6% of the entrapped calcein leaked out in contrast to 10% release from the egg PC liposomes without TZS. LUVs composed of dipalmitoylphosphatidylcholine (DPPC) or dioleoylphosphatidylcholine (DOPC) were stabilized by the incorporation of TZS at a temperature below 30 degrees C. Inclusion of TZS in LUVs composed of dimyristoylphosphatidylcholine, whose hydrocarbon chains are shorter than both DPPC and DOPC, did not stabilize the liposomes. About 90% of the entrapped dye was lost indicating defects of the liposomal membranes. Matching of the lipid bilayer thickness with the molecular length of TZS in the bilayers is discussed.     

Development and modeling of arsenic-trioxide–loaded thermosensitive liposomes for anticancer drug delivery

In this article, a novel delivery system for the anticancer drug, arsenic trioxide (ATO), is characterized. The release of ATO from DPPC liposomes with MPPC lysolipid incorporated into the bilayer was measured. Upon heating the liposomes to 37°C, there was a 15–25% release over 24 hours. The ATO release from the DPPC and DPPC:MPPC (5%) systems leveled off after 10 hours at 37°C, whereas the DPPC:MPPC (10%) liposomes continue to release ATO over the 24-hour time span. Upon heating the liposomes rapidly to 42°C, the release rate was substantially increased. The systems containing lysolipids exhibited a very rapid release of a significant amount of arsenic in the first hour. In the first hour, the DPPC:MPPC (5%) liposomes released 40% of the arsenic and the DPPC:MPPC (10%) liposomes released 55% of the arsenic. Arsenic release from pure DPPC liposomes was comparable at 37 and 42°C, indicating that the presence of a lysolipid is necessary for a significant enhancement of the release rate. A coarse-grained molecular dynamics (CGMD) model was used to investigate the enhanced permeability of lysolipid-incorporated liposomes and lipid bilayers. The CG liposomes did not form a gel phase when cooled due to the high curvature; however, permeability was still significantly lower below the liquid-to-gel phase-transition temperature. Simulations of flat DPPC:MPPC bilayers revealed that a peak in the permeability did coincide with the phase transition from the gel to LC state when the lysolipid, MPPC, was present. No pores were observed in the simulations, so it is unlikely this was the permeability-enhancing mechanism.