Determination of trichlormethiazide in bovine milk by high-performance liquid chromatography

A liquid chromatographic procedure was developed and validated for the quantitative determination of trichlormethiazide (TCMTZ) in bovine milk. Whole milk was defatted by initial centrifugation at 4°C. The resulting skim milk was treated with lead acetate and acetonitrile, vortex mixed, and centrifuged. The acetonitrile from the supernatant was back extracted in ethyl acetate. The organic solvent mixture which contained TCMTZ was further treated with sodium tungstate, vortex mixed, and centrifuged. The top organic layer was removed and evaporated to dryness; the resulting residue was reconstituted in the mobile phase, and the final extract was analyzed by high-performance liquid chromatography (HPLC). The HPLC conditions employed included a polymer column, a mobile phase consisting of 30% acetonitrile or 30% acetonitrile–tetrahydrofuran (2:1, v/v) in a phosphate buffer (pH 3), and a UV detection at 225 nm. The average recoveries of TCMTZ from milk fortified at 7, 14, 35, 70, and 140 ppb were 88, 93, 117, 110, and 99%, respectively, with corresponding C.V. values of 7, 18, 11, 9, and 21%. The method was validated by assaying milk obtained from a cow dosed with Naquasone. TCMTZ concentration was detected only in the 8 h post dose milk samples and was determined to be 6 ppb.     

Fluorescence and circular dichroism spectroscopy of cytochrome c in alkylammonium formate ionic liquids

The structural stability of cytochrome c has been studied in alkylammonium formate (AAF) ionic liquids such as methylammonium formate (MAF) and ethylammonium formate (EAF) by fluorescence and circular dichroism (CD) spectroscopy. At room temperature, the native structure of cytochrome c is maintained in relatively high ionic liquid concentrations (50-70% AAF/water or AAF/phosphate buffer pH 7.0) in contrast with denaturation of cytochrome c in similar solutions of methanol or acetonitrile with water or buffer cosolvents. Fluorescence and CD spectra indicate that the conformation of cytochrome c is maintained in 20% AAF-80% water from 30 to 50 °C. No such temperature stability is found in 80% AAF-20% water. About one-third of the enzyme activity of cytochrome c in 80% AAF-20% water can be maintained as compared with phosphate buffer, and this is greater than the activities measured in corresponding methanol and acetonitrile aqueous solutions. This biophysical study shows that AAFs have potential application as organic solvent replacements at moderate temperature in the mobile phase for the separation of proteins in their native form by reversed phase liquid chromatography.     

Study of the solid-phase extraction of diclofenac sodium, indomethacin and phenylbutazone for their analysis in human urine by liquid chromatography

A selective semi-automated solid-phase extraction (SPE) of the non-steroidal anti-inflammatory drugs diclofenac sodium, indomethacin and phenylbutazone from urine prior to high-performance liquid chromatography was investigated. The drugs were recovered from urine buffered at pH 5.0 using C₁₈ Bond-Elut cartridges as solid sorbent material and mixtures of methanol–aqueous buffer or acetonitrile–aqueous buffer as washing and elution solvents. The extracts were chromatographed on a reversed-phase ODS column using 10 mM acetate buffer (pH 4.0)–acetonitrile (58:42, v/v) as the mobile phase, and the effluent from the column was monitored at 210 nm with ultraviolet detection. Absolute recoveries of the anti-inflammatory drugs within the range 0.02–1.0 μg/ml were about 85% for diclofenac and indomethacin, and 50% for phenylbutazone without any interference from endogenous compounds of the urine. The within-day and between-day repeatabilities were in all cases less than 5% and 10%, respectively. Limits of detection were 0.007 μg/ml for diclofenac sodium and indomethacin and 0.035 μg/ml for phenylbutazone, whereas limits of quantitation were 0.02 μg/ml for diclofenac and indomethacin and 0.1 μg/ml for phenylbutazone.     

Multiresidue determination of quinolone antibacterials in eggs of laying hens by liquid chromatography with fluorescence detection

An analytical method for the simultaneous determination of seven quinolones (ciprofloxacin, enrofloxacin, danofloxacin, difloxacin, flumequine, oxolinic acid and sarafloxacin) in egg samples of laying hens was developed. Their use is totally prohibited in animals from which eggs are produced for human consumption. Protein precipitation was achieved by addition of acetonitrile and ammonia, removal of acetonitrile with dichloromethane, the quinolones remaining in the basic aqueous extract. The aqueous extract was analysed by liquid chromatography with fluorescence detection (LC-FD). The mobile phase was composed of acetonitrile and 10 mM citrate buffer solution of pH 4.5, with an initial composition of acetonitrile-water (12:88, v/v) and using linear gradient elution. Norfloxacin was used as an internal standard. The limits of detection found were 4-12 ng g(-1). These values were lower than the maximum residue limits (MRLs) established by the European Union for these compounds in different tissues of eggs-producing animals.     

Stability of apomorphine in plasma and its determination by high-performance liquid chromatography with electrochemical detection

Dilute solutions (50 ng/ml) of apomorphine in plasma are unstable at 37°C and pH 7.4. The chemical half-life is only 39 min. Mercaptoethanol (0.01%) is effective in stabilizing these samples while sodium metabisulphite (1%), which is generally used, is not effective. Biological samples are extracted with diethyl ether (recovery 96.5%) and analysed using HPLC with coulometric detection (oxidation potential 0.25 V). The stationary phase employed was C₁₈ material (4 μm) and the mobile phase was phosphate buffer (pH 3)—acetonitrile (70:30, v/v). The flow-rate was 1.8 ml/min. This bioanalytical method presents a reliable tool for pharmacokinetic studies in man.     

Determination of inositol hexanicotinate in rat plasma by high performance liquid chromatography with UV detection

A HPLC method with UV detection at 262nm was developed to analyze inositol hexanicotinate in rat plasma. Plasma samples were extracted with an equal volume of acetonitrile, followed by dilution with mobile phase buffer (5mM phosphate buffer, pH 6.0) to eliminate any solvent effects. Inositol hexanicotinate and the internal standard (mebendazole) were separated isocratically using a mobile phase of acetonitrile/phosphate buffer (35:65, v/v, pH 6.0) at a flow rate of 1.0mL/min and a reverse-phase XTerra MS C(18) column (4.6mmx150mm, 3.5microm). The standard curve was linear over a concentration range of 1.5-100.0microg/mL of inositol hexanicotinate in rat plasma. The HPLC method was validated with intra- and inter-day precisions of 1.55-4.30% and 2.69-21.5%, respectively. The intra- and inter-day biases were -0.75 to 19.8% and 2.58-22.0%, respectively. At plasma concentrations of 1.5-100microg/mL, the mean recovery of inositol hexanicotinate was 99.6%. The results of a stability study indicated that inositol hexanicotinate was unstable in rat plasma samples, but was stable in acetonitrile extracts of rat plasma for up to 24h at 4 degrees C. The assay is simple, rapid, specific, sensitive, and reproducible and has been used successfully to analyze inositol hexanicotinate plasma concentrations in a pharmacokinetic study using the rat as an animal model.     

Quantitation of tigecycline, a novel glycylcycline [corrected] by liquid chromatography

An ion-paired HPLC assay was developed to determine tigecycline (GAR-936) concentrations in Hank's balanced salts solution, tigecycline intra-cellular concentrations in human polymorphonuclear neutrophils (PMNs) and tigecycline concentrations in human serum. Minocycline was used as internal standard, 5% trichloroacetic acid was added to lyse PMNs and also precipitate proteins in PMNs and serum. The top aqueous layer was aspirated for HPLC assay. The chromatograms were performed with a reversed-phase C18 column with UV detector. The mobile phase consisted of acetonitrile, phosphate buffer (pH 3) and 1-octanesulfonic acid at a flow rate of 1 ml/min. Good linearity and recovery were achieved over the range of standard curves. The relative standard deviations of three quality controls for intra- and inter-day precision were less than 6.4%, and the relative errors of the intra- and inter-day accuracy were less than 7.0%. Tigecycline in Hank's buffer, PMNs and serum was stable under different test conditions. This new liquid chromatography assay is a simple, accurate and reproducible method for determining tigecycline in different matrix.     

High pressure liquid chromatographic identification of hyaluronic acid and chondroitin sulphate disaccharides.

In this report we describe a system capable of resolving all of the known unsaturated disaccharides derived from the chondroitin sulphates, dermatan sulphate and hyaluronic acid by chondroitinase digestion. This system is superior to others in that the non-sulphated and mono-, di- and tri-sulphated disaccharides can be separated with good resolution in approximately 40 min in an isocratic solvent. The system employs an amino-cyano silica gel column (Whatman Partisil 5 PAC, 25 cm) and is eluted with an isocratic solvent consisting of 48% (v/v) acetonitrile, 14% (v/v) methanol and 38% (v/v) aqueous buffer. This aqueous buffer contains 0.5 M Tris-HCl, 0.1 M boric acid, 23.4 mM sulphuric acid, pH 8.0. UV absorption is monitored at 229 nm and for most disaccharides as little as 150 ng can be reliably determined. The addition of boric acid to the eluent is essential for good resolution of all components and the addition of low concentrations of sulphuric acid is used to control the elution times of various components. The system was applied to the analysis of glycosaminoglycan standards and excellent agreement with previous compositional analyses was obtained.     

Simultaneous extraction and concentration of penicillin G by hollow fiber renewal liquid membrane

In this article, hollow fiber renewal liquid membrane (HFRLM) technique was used for recovery of penicillin G from aqueous solution. The organic solution of 7 vol % di‐n‐octylamine (DOA) + 30 vol % iso‐octanol + kerosene was used as liquid membrane phase, and Na₂CO₃ aqueous solution was used as stripping phase. Experiments were performed as a function of carrier concentration in the organic phase, organic/aqueous volume ratio, pH, and initial penicillin G concentration in the feed phase, pH in the stripping phase, flow rates, etc. The results showed that the HFRLM process was stable and could carry out simultaneous extraction and concentration of penicillin G from aqueous solutions. As a carrier facilitated transport process, the addition of DOA in organic phase could greatly enhance the mass transfer rate; and there was a favorable organic/aqueous volume ratio of 1:20 to 1:30 for this system. The mass transfer flux and overall mass transfer coefficient increased with decreasing pH in the feed phase and increasing pH in the stripping phase, because of variation of the mass transfer driving force caused by pH gradient and distribution equilibrium. The flow rate of the shell side had significant influence on the mass transfer performance, whereas the effect of flow rate of lumen side on the mass transfer performance was slight because of the mass transfer intensification of renewal effect in the lumen side. The results indicated that the HFRLM process was a promising method for the recovery of penicillin G from aqueous solutions. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Isocratic resolution of amino acid thiohydantoins by high-performance liquid chromatography.

Sixteen amino acid thiohydantoins encountered during COOH-terminal degradation of peptides and proteins with ammonium thiocyanate have been separated and identified by reverse phase high-performance liquid chromatography using a DuPont Zorbax ODS column and a novel procedure for preparation of thiohydantoin derivative of serine and threonine is described. Three isocratic systems were employed: System 1, buffer A alone (0.01 n sodium acetate, pH 4.5); system 2, 10% acetonitrile in buffer A; system 3, 24% acetonitrile in buffer A. All 16 thiohydantoins could be resolved using a combination of systems 1, 2, and 3. The method is rapid and sensitive (1 nmol) and constitutes a step toward automation of the solid-phase COOH-terminal sequencing method.     

Comparison of polysaccharide-based and protein-based chiral liquid chromatography columns for enantioseparation of drugs

Two different columns—Lux Cellulose-1 and Chiralpak CBH—were evaluated for their chiral recognition abilities for eight drugs comprising three β-blockers, one antacid, and four cathinones in polar-organic elution mode and reversed-phase elution mode, respectively. The factors that affected the enantioseparation were tested and optimized to develop a suitable chiral separation method whose LC conditions are compatible with MS detection. In polar-organic elution mode with the Lux Cellulose-1 column, methanol and acetonitrile were tested as the main components of the mobile phase. In addition, the effects of adding isopropanol as organic modifier, acidic additives (formic acid), and basic additives (diethylamine) were evaluated. In reversed-phase elution mode with the Chiralpak CBH column, the effect of type and concentration of organic modifier (isopropanol, acetonitrile, and methanol), the mobile phase pH (6.4 and 5.0), and buffer concentration (1mM-20mM ammonium acetate) were evaluated. The best enantioseparation was achieved with the Chiralpak CBH column with a mobile phase composed of 5mM ammonium acetate aqueous (pH = 6.4)/methanol (95/5, v/v) at a flow rate of 0.1 mL/min and a temperature of 30°C. Under these conditions, six of eight chiral drugs were baseline separated.     

Automated solid-phase extraction method for the determination of piperaquine in capillary blood applied onto sampling paper by liquid chromatography

A bioanalytical method for the determination of piperaquine in 100 microL blood applied onto sampling paper, by solid-phase extraction and liquid chromatography, has been developed and validated. Blood spots were cut into small pieces prior to addition of 0.3M perchloric acid, acetonitrile and phosphate buffer containing an internal standard. The liquid phase was loaded onto a mixed phase cation-exchange (MPC) solid-phase extraction column. Piperaquine and the internal standard were analysed by liquid chromatography and separated on a Chromolith Performance (100 mm x 4.6 mm) column with acetonitrile:phosphate buffer pH 2.5, I = 0.1 (8:92, v/v) at the flow of 3.5 mL/min. The UV detection was performed at 345 nm. The intra-assay precision was 12.0% at 0.150 microM, 7.3% at 1.25 microM and 7.3% at 2.25 microM. The inter-assay precision was 1.8% at 0.150 microM, 5.2% at 1.25 microM and 2.8% at 2.25 microM. The lower limit of quantification (LLOQ) was determined to 0.050 microM where the precision was 14.7%.     

Simultaneous separation of atovaquone, proguanil and its metabolites on a mixed mode high-performance liquid chromatographic column

An isocratic high-performance liquid chromatographic (HPLC) method for simultaneous separation of the components in the antimalarial combination drug Malarone^® with UV detection is described. An HPLC system using a mixed mode column composed of 50% C₁₈ phase and 50% strong cation-exchanger has been optimised for the simultaneous separation of atovaquone, proguanil and its two main metabolites. The mobile phase was optimised for factors such as pH, counter ion concentration and acetonitrile. Elimination of interferences from other antimalarial drugs was achieved by adding sodium perchlorate to the mobile phase. With a mobile phase of acetonitrile-phosphate buffer (60:40, v/v) pH 6.8, 50.7 mmol l⁻¹ K⁺ and 10 mmol l⁻¹ Na·ClO₄, separation was achieved within a run time shorter than 17 min.     

The equilibrium and kinetics of N-acetyl-tryptophan phenylethyl ester synthesis by agarose-chymotrypsin in organic media

The synthesis of N-acetyl tryptophan phenylethyl ester in organic media is catalyzed by suspended agarose beads with multipoint covalently attached chymotrypsin. A dilute aqueous phase is trapped within the gel beads and may be manipulated separately from the organic phase. The equilibrium position becomes more favorable as the solvent polarity decreases, with K(eq) increasing 38 times between 2-butanone and 1,1,1-trichloroethane. The more apolar solvents also give faster kinetics. Addition of cosolvents (up to 10% dimethylformamide or 20% acetonitrile) does not affect the rate but does substantially reduce the equilibrium yield, presumably also by making the organic phase more polar. With trichloroethane as solvent the enzyme appears to be kinetically saturated with 1M phenylethanol. Doubling this concentration also does not cause the expected increase in equilibrium conversion, probably again because K(eq) is reduced in the more polar organic phase. Increased temperature raises the reaction rate as expected but has little effect on the equilibrium. (c) 1992 John Wiley & Sons, Inc.     

Interfacial activation and bioimprinting of Candida rugosa lipase immobilized on polypropylene: effect on the enzymatic activity in solvent-free ethyl oleate synthesis

Lipase from Candida rugosa adsorbed on polypropylene powder (CR/PP) was subjected to activation pre-treatments in order to enhance its activity in solvent-free ethyl oleate synthesis. The lipase activation achieved upon adsorption onto a hydrophobic support like PP was further enhanced through oil–water interfacial activation and bioimprinting of the immobilized catalyst. Several aliphatic hydrocarbons/buffer pH 7 mixtures were used in the pre-activation of CR/PP with specific activity increments of up to 29%. Molecular bioimprinting was also performed, with specific activity enhancement of near 70% with respect to non-treated CR/PP. The effect of several fatty acids used as templates and the water present in the reaction medium was studied. The oil–water activation and bioimprinting treatments that led to the best activities were assayed at the immobilization step. Instead of pre-treating CR/PP adsorbed in buffer medium, interfacial activation with octane/buffer and bioimprinting with a mix of fatty acids were carried out in the immobilization vial. The best results were found for CR/PP immobilized in 5/95 octane/buffer (v/v, %) medium. In that way, a biocatalyst with enhanced specific activity is obtained right from the immobilization vial with no need of further activation steps prior to reaction.     

Determination of cephalosporins in biological material by reversed-phase liquid column chromatography

Seven cephalosporins (β-lactam antibiotics), viz. cefazolin, cephalotin, cefoxitin, cefotaxime, cefamandole, cefuroxime and cefoperazone (T 1551) were determined in biological material. The compounds were extracted from acid-treated body fluids into chloroform—1-pentanol (3:1) and re-extracted into a small volume of an aqueous phase at pH 7, which was injected into the chromatographic column. The chromatographic support was μBondapak C_1a (10 μm) and the mobile phase was a mixture of 0.01 M acetate buffer (pH 4.8) and methanol or acetonitrile. Detection limits are about 50 ng/ml for extractions from 1 ml of serum and have permitted pharmacokinetic studies of the seven cephalosporins.     

Automated method for the determination of a new matrix metalloproteinase inhibitor in ovine plasma and serum by coupling of restricted access material for on-line sample clean-up to liquid chromatography

A fully automated liquid chromatographic method was developed for the determination of Ro 28-2653, a new synthetic inhibitor of matrix metalloproteinases (MMPs), in ovine serum and plasma. The method was based on the coupling of a pre-column packed with restricted access material, namely LiChrospher RP-8 ADS (alkyl diol silica), for sample clean-up to an analytical column containing octyl silica stationary phase. One hundred microl of biological sample, to which 2-propanol was automatically added, were injected onto the ADS pre-column, which was then washed with a washing liquid consisting of a mixture of 25 mM phosphate buffer (pH 7.0) and acetonitrile (90:10; v/v) for 10 min. By rotation of the switching valve, the analyte was then eluted in the back-flush mode with the LC mobile phase composed of a mixture of acetonitrile and 25 mM phosphate buffer (pH 7.0) (57:43; v/v). The UV detection was performed at 395 nm. The main parameters likely to influence the sample preparation technique were investigated. The method was then validated over a concentration range from 17.5 to 1950 ng/ml, the first concentration level corresponding to the lower limit of quantitation. At this concentration level, the mean bias and the R.S.D. value for intermediate precision were -2.4% and 4.2%, respectively.     

Efficient removal of albumin from human serum by monosize dye-affinity beads

Cibacron Blue F3GA was covalently attached onto monosize poly(glycidyl methacrylate) [poly(GMA)] beads for removal of human serum albumin (HSA) from human serum. Monosize poly(GMA) beads, 1.6 microm in diameter, were produced by dispersion polymerization. Cibacron Blue F3GA loading was 1.73 mol/g. HSA adsorption experiments were performed by stirred-batch adsorption. The non-specific adsorption of HSA was low (0.8 mg/g polymer). Dye attachment onto the monosize beads significantly increased the HSA adsorption (189.8 mg/g). The maximum HSA adsorption was observed at pH 5.0. With an increase of the aqueous phase concentration of sodium chloride, the adsorption capacity decreased drastically. The equilibrium adsorption of HSA significantly decreased with increasing temperature. The elution studies were performed by adding 0.1 M Tris/HCl buffer containing 0.5 M NaSCN to the HSA solutions in which adsorption equilibria had been reached. The elution results demonstrated that the adsorption of HSA to the adsorbent was reversible. The depletion efficiencies for HSA were above 87% for all studied concentrations. To test the efficiency of HSA removal from human serum, proteins in the serum and eluted portion were analyzed by two-dimensional gel electrophoresis. Eluted proteins include mainly albumin, and a small number of nonalbumin proteins such as apo-lipoprotein A1, sero-transferrin, haptoglobulin and alpha1-antitrypsin were bound by the dye-affinity beads. IgA was not identified in eluted fraction.     

Cationized starch-based material as a new ion-exchanger adsorbent for the removal of C.I. Acid Blue 25 from aqueous solutions

This article describes the use of a cationized starch-based material as new ion-exchanger adsorbent for the removal of C.I. Acid Blue 25 (AB 25) from aqueous solutions. Batch adsorption studies concerning the effects of contact time, pH and temperature are presented and discussed. Adsorption experimental data showed that: (i) the process was uniform and rapid: adsorption of dye reached equilibrium in 50 min in the wide pH range of dye solutions; (ii) adsorption kinetics followed the pseudo-second order model; (iii) the Langmuir model yielded a much better fit than the Freundlich model for the dye concentration range under study; (iv) this adsorbent exhibited interesting adsorption capacities: on the basis of the Langmuir analysis, the maximum adsorption capacity was determined to be 322 mg of dye per gram of material at 25 degrees C; (v) the adsorption capacity decreased with increasing temperature; and (vi) the negative value of free energy change indicated the spontaneous nature of adsorption.     

High pressure liquid chromatography solvent systems for studies of bile acid biosynthesis

Reversed phase high pressure liquid chromatography (HPLC) solvent systems have been developed for the separation of intermediates in the formation of bile acids and bile acid conjugates from cholesterol. Four different mobile phases (water-methanol, 10 mM acetate buffer (pH 4.37)-methanol, 30 mM trifluoroacetic acid (pH 2.9 with triethylamine)-methanol, and 50 mM potassium phosphate buffer (pH 7.0)-2-propanol) have been applied to obtain separation of all the main intermediates with use of the same reversed phase column (Zorbax ODS).