Enzymatic Saccharification of Lignocelluloses Should be Conducted at Elevated pH 5.2–6.2

This study revealed that cellulose enzymatic saccharification response curves of lignocellulosic substrates were very different from those of pure cellulosic substrates in terms of optimal pH and pH operating window. The maximal enzymatic cellulose saccharification of lignocellulosic substrates occurs at substrate suspension pH 5.2–6.2, not between pH 4.8 and 5.0 as exclusively used in literature using T. reesi cellulase. Two commercial cellulase enzyme cocktails, Celluclast 1.5L and CTec2 both from Novozymes, were evaluated over a wide range of pH. The optimal ranges of measured suspension pH of 5.2–5.7 for Celluclast 1.5L and 5.5–6.2 for CTec2 were obtained using six lignocellulosic substrates produced by dilute acid, alkaline, and two sulfite pretreatments to overcome recalcitrance of lignocelluloses (SPORL) pretreatments using both a softwood and a hardwood. Furthermore, cellulose saccharification efficiency of a SPORL-pretreated lodgepole pine substrate showed a very steep increase between pH 4.7 and 5.2. Saccharification efficiency can be increased by 80 % at cellulase loading of 11.3 FPU/g glucan, i.e., from approximately 43 to 78 % simply by increasing the substrate suspension pH from 4.7 to 5.2 (buffer solution pH from 4.8 to 5.5) using Celluclast 1.5L, or by 70 % from approximately 51 to 87 % when substrate suspension pH is increased from 4.9 to 6.2 (buffer solution pH from 5.0 to 6.5) using CTec2. The enzymatic cellulose saccharification response to pH is correlated to the degree of substrate lignin sulfonation. The difference in pH-induced lignin surface charge, and therefore surface hydrophilicity and lignin–cellulase electrostatic interactions, among different substrates with different lignin content and structure is responsible for the reported different enhancements in lignocellulose saccharification at elevated pH.     

Production of H2 from cellulose by rumen microorganisms: effects of inocula pre-treatment and enzymatic hydrolysis

H₂ production from cellulose, using rumen fluid as the inoculum, has been investigated in batch experiments. Methanogenic archaea were inhibited by acid pre-treatment, which also inhibited cellulolytic microorganisms, and in consequence, the conversion of cellulose to H₂. Positive results were observed only with the addition of cellulase. H₂ yields were 18.5 and 9.6 mmol H₂ g cellulose^?1 for reactors with 2 and 4 g cellulose l^?1 and cellulase, respectively. H₂ was primarily generated by the butyric acid pathway and this was followed by formation of acetic acid, ethanol and n-butanol. In reactors using 4 g cellulose l^?1 and cellulase, the accumulation of alcohols negatively affected the H₂ yield, which changed the fermentation pathways to solventogenesis. PCR–DGGE analysis showed changes in the microbial communities. The phylogenetic affiliations of the bands of DGGE were 99 % similar to Clostridium sp.     

Degradation of cellulosic materials by Sporotrichum thermophile culture filtrate for sugar production

Sporotrichum thermophile Apinis, was the most active carboxymethyl-cellulose (CMC)-ase producer among seven thermophilic and four thermotolerant fungal species isolated from Egyptian soil and screened for their ability to produce extracellular cellulase in culture media containing CMC as a sole carbon source. The fungus also efficiently hydrolysed filter paper cellulose. Comparison of various untreated and alkali-treated cellulosic and lignocellulosic materials as substrates for cellulase production by S. thermophile revealed the most easily degraded substrate was sugarcane bagasse at 2% concentration. This substrate when alkali treated was the most susceptible to enzymic hydrolysis by culture filtrates of S. thermophile grown on untreated bagasse. Optimum hydrolysis was obtained after 18 h incubation with the filtrate at pH 3·5–4 and 45°C. Alkali treatment of bagasse reduced its lignin content significantly and the culture filtrate of S. thermophile grown on untreated bagasse was found to contain xylanase and polygalacturonase in addition to cellulase and cellobiase.     

Ethanol production in simultaneous saccharification and fermentation of cellulose with temperature profiling

The effects of temperature on enzymatic saccharification of cellulose and simulataneous saccharification and fermentation (SSF) were investigated with 100 g·l⁻¹ Solka Floc, 5g·l⁻¹Trichoderma reesei cellulase, and Zymomonas mobilis ATCC 29191. The following results were obtained: 1) Ethanol fermentation under glucose dificient conditions can proceed for more than 100 h at 30°C but gradually ceases after 50 h of operation at 40°C. 2) Equivalent glucose yield based on cellulose for SSF operated at its optimum temperature (37°C) is higher than that for enzymatic saccharification of cellulose at the same temperature by 32%. However, the same equivalent glucose yields were obtained for both processes if they were operated at their respective optimum temperature. 3) SSF with temperature cycling increased the ethanol productivity but gave similar ethanol yield to SSF at 37°C. 4) SSF with temperature profiling gave an ethanol yield of 0.32 g·g⁻¹ and cellulose use of 0.86 g·g⁻¹ which were increased by 39% and 34% over SSF with temperature cycling and at 37°C.     

Kinetics of cellulose hydrolysis by halostable cellulase from a marine Aspergillus niger at different salinities

Kinetics of cellulose hydrolysis with halostable cellulase from a marine Aspergillus niger was analyzed at different salinities. Cellulase activity in 8% NaCl solution was 1.43 folds higher than that in NaCl free solution. Half saturation constant, K_m (15.6260 g/L) and the rate constant of deactivation, K_de (0.3369 g/L h) in 8% NaCl solution was lower than that (18.6364 g/L), 0.3754 (g/L h) in NaCl free solution. The maximum initial hydrolysis velocity, V_max (25.5295 g/L h), in 8% NaCl solution was higher than that in NaCl free solution (25.0153 g/L h). High salinity increased affinity to the cellulase to the substrate and thermostability. Halostable cellulase from a marine Aspergillus niger was valuable for cellulose hydrolysis under high salinity conditions.     

Pectinase and cellulase activity in the digestive system of the elm leaf beetle,Xanthogaleruca luteola Muller (Coleoptera: Chrysomelidae)

The elm leaf beetle, Xanthogaleruca luteola, is a serious pest of elm trees in urban areas. Partial biochemical characterization of pectinases and cellulases was conducted using the larval digestive system of the pest. Midgut extracts from larvae showed optimum activity for pectinase and cellulase against pectin and carboxymethyl cellulose, respectively, under acidic conditions (pH 6). Pectinases and cellulases were respectively more stable under acidic conditions (pH 4–7) and slightly acidic conditions (pH 5–7) than under highly acidic and alkaline conditions. However, the enzymes were more stable in slightly acidic conditions (pH 6) when incubation time was increased. Maximum activity for the pectinases and cellulases incubated at different temperatures was observed at 45 and 50 °C, respectively. Mg²⁺ remarkably increased pectinase activity, and cellulase activity increased significantly in the presence of Ca²⁺ and Mg²⁺. Sodium dodecyl sulfate significantly decreased pectinase and cellulase activity. The Michaelis–Menten constant (K_M) and the maximal reaction velocity (V_max) values for pectinase were 2 mg·mL^? 1 and 0.017 mmol·min^? 1·mg^? 1 protein toward pectin, respectively. Zymogram analyses revealed the presence of one and five bands of pectinase and cellulase activity, respectively, in the larval midgut extract.     

A continuous spectrophotometric assay for the determination of cellulase solubilizing activity

A cellulase assay was developed for the continuous measurement of colored cellulose oligosaccharides (total carbohydrates) released during enzymatic hydrolysis of dyed crystal-line cellulose. Several cellulosic substrates were uniformly dyed by Remalzol brilliant blue R salt without altering their physical properties. Dyed Avicel (6.5%, w/w) was selected as the most representative substrate for the assay procedure. The assay was performed continuously in a simple, thermally controlled apparatus designed for filtration of the reaction mixture via a 5-μm-pore-size nylon filter to retain the crystalline dyed cellulose while spectrophotometrically monitoring the absorbance at 595 nm of the reaction filtrate. Crude supernatant cellulase of Trichoderma viride QM9414 was used to test the assay procedure. The activity of cellulase on dyed Avicel as measured by ΔA_595nm correlated directly with the total carbohydrates formed. The initial reaction rate of cellulase solubilizing activity was readily determined with high sensitivity. The continuous assay has utility for the study of cellulase kinetics and for the comparison of activities from different microorganisms.     

Ethanol production from sunflower meal biomass by simultaneous saccharification and fermentation (SSF) with Kluyveromyces marxianus ATCC 36907

The lignocellulosic materials are considered promising renewable resources for ethanol production, but improvements in the processes should be studied to reduce operating costs. Thus, the appropriate enzyme loading for cellulose saccharification is critical for process economics. This study aimed at evaluating the concentration of cellulase and β-glucosidase in the production of bioethanol by simultaneous saccharification and fermentation (SSF) of sunflower meal biomass. The sunflower biomass was pretreated with 6 % H₂SO₄ (w/v), at 121 °C, for 20 min, for hemicellulose removal and delignificated with 1 % NaOH. SSF was performed with Kluyveromyces marxianus ATCC 36907, at 38 °C, 150 rpm, for 72 h, with different enzyme concentrations (Cellulase Complex NS22086-10, 15 and 20 FPU/g_substrate and β-Glucosidase NS22118, with a cellulase to β-glucosidase ratio of 1.5:1; 2:1 and 3:1). The best condition for ethanol production was cellulase 20 FPU/g_substrate and β-glucosidase 13.3 CBU/g_substrate, resulting in 27.88 g/L ethanol, yield of 0.47 g/g and productivity of 0.38 g/L h. Under this condition the highest enzymatic conversion of cellulose to glucose was attained (87.06 %).     

Adsorption kinetics and behaviors of cellulase components on microcrystalline cellulose

In order to investigate the interactive adsorption behaviors between each cellulase component purified from Trichoderma viride cellulase on microcrystalline cellulose, the adsorption of CMCase, Avicelase, and various compositions of CMCase and Avicelase was performed at 25–45°C. All adsorptions were found to apparently obey the Langmuir isotherm and the thermodynamic parameters, ΔH_a, ΔS_a, and ΔG_a were calculated from the adsorption equilibrium constant, K_ad. The adsorption process was found to be endothermic and an adsorption entropy-controlled reaction. The amount of adsorption of cellulase components decreased with increasing temperature and varied with a change in composition of the cellulase components. The maximum synergistic degradation occurred at the specific mass ratio of the cellulase components at which the maximum affinity of cellulase components occurred.     

Biodegradation of microcrystalline cellulose in pH–pH recyclable aqueous two-phase systems with water-soluble immobilized cellulase

Product inhibition is a barrier for enzymatic conversion of cellulose into reducing sugar in single aqueous phase. In addition, the difficulty in the recovery of cellulase also leads to high cost for the enzymatic hydrolysis of cellulose. In this study, enzymatic degradation of cellulose was carried out in pH–pH recyclable aqueous two-phase systems (ATPS) composed by copolymers poly (AA-co-DMAEMA-co-BMA) (abbreviated P_ADB3.8) and poly (MAA-co-DMAEMA-co-BMA) (abbreviated P_MDB). In the systems, cellulase was immobilized on pH-response copolymer P_MDB by using 1-Ethyl-3-(3-dimethyllaminopropyl)-carbodiimide hydrochloride (EDC) as cross-linker. Optimized partition coefficient of product in the systems was 2.45, in the presence of 40 mM (NH₄)₂SO₄. Insoluble substrate and immobilized enzyme were biased to bottom phase, while the product was partitioned to top phase. Microcrystalline cellulose was hydrolyzed into reducing sugar, and the product entered into top phase. The yield of saccharification in ATPS could reach 70.57% at the initial substrate concentration of 0.5% (w/v), and the value was 9.3% higher than that in the single aqueous phase. Saccharification yield could reach 66.15% after immobilized cellulase was recycled five times in ATPS.     

Cellulase from Ruminococcus albus and Mixed Rumen Microorganisms

Cellulase in the cultural filtrates of Ruminococcus albus and cellulase extracted from mixed rumen microorganisms were investigated with acid-swollen cellulose and carboxymethylcellulose as substrates. Maximal activity occurred at approximately pH 5.8 and 47 C. Apparent Michaelis constants (K_m) varied between 0.53 and 0.02% carboxymethylcellulose, depending on the level of activity and the method of assay. R. albus cellulase has a lower K_m value than the enzyme extracted from mixed rumen microorganisms. Antisera from rabbits immunized with a cellulase preparation from R. albus inhibited the cellulolytic activity of both systems. Based on the relative degree of inhibition, approximately 20% of the cellulase of the mixed rumen microorganisms was immunologically similar to R. albus cellulase. Ratios of activity in different assay techniques showed the two sources of activity to be similar in the mechanisms of degradation. However, glucose is the main product of cellulose degradation by mixed rumen microorganisms, and cellobiose is the product of degradation by R. albus.     

Cloning and Characterizing the Thermophilic and Detergent Stable Cellulase CelMytB from Saccharophagus sp. Myt-1

We previously isolated and reported a second species of the Saccharophagus genus, Saccharophagus sp. strain Myt-1. In the present study, a cellulase gene (celMytB) from the genomic DNA of Myt-1 was cloned and characterized. The DNA sequence fragment contained an open reading frame of 1,893 bp that encoded a protein of 631 amino acids with an estimated molecular mass of 66.8 kDa. The deduced protein, CelMytB, had a catalytic domain that contained a conserved signature sequence (VIYEIYNEPL) of glycosyl hydrolase family 5 and a CBM6 cellulose binding module. CelMytB showed optimal activity at 55 °C and pH 6.5, which is similar to the optimal temperature and pH profile of cel5H, an endoglucanase from the closely related S. degradans 2-40. However, the cellulase (degradation of soluble cellulose) and avicelase (degradation of crystalline cellulose) activities of CelMytB were about 3-fold and 100-fold higher, respectively, than the equivalent activities of cel5H. Moreover, CelMytB could degrade xylan. From the zymogram results, we speculated that the catalytic domain of CelMytB had high activity even without the cellulose binding module. The presence of some detergents stimulated the cellulase activity of CelMytB.     

Factors Affecting the Activity of Cellulases Isolated from the Rumen Digesta of Sheep

Sodium phosphate buffer was used to extract cellulases from the plant solids fraction of rumen contents. The mixed cellulase preparation had maximal activity at pH 6.9 and 49°C. The V_max and the apparent K_m for wheaten hay cellulose were 19.8 glucose units/min and 6.35 mg/ml, respectively, and for microcrystalline cellulose (Sigmacell) at the same enzyme concentration, they were 33 glucose units/min and 27.5 mg/ml, respectively. For these assays a glucose unit was defined as nanomoles of glucose plus twice the nanomoles of cellobiose. Consideration of thermodynamic and kinetic data suggested that the hydrolysis of a relatively labile arabino-xylan comprising 3% of the wheaten hay cellulose was dependent on prior removal of the protecting β-1,4-glucose chains at the outer surface of the cellulose preparation. Sequential removal of structural polysaccharides from the plant cell wall rendered the latter more susceptible to cellulase activity. Cellulase activity was stimulated by increasing the concentration of phosphate from 5 to 50 mM. The stimulation was magnified in the presence of cell-free rumen fluid. Cellulase activity was not stimulated by calcium, magnesium, iron, zinc, manganese, copper, or cobalt ions and was unaffected by the chelators ethylenediaminetetraacetic acid and ethyleneglycol-bis (β-aminoethyl ether)-N,N′-tetraacetic acid. O-phenanthroline inhibited activity by 30 to 50%, but this may have been due to nonchelate properties. Anaerobic conditions or thiol protective agents were not essential for either the activity or stability of the cellulases during assay. An ultrafiltrable inhibitor of cellulase activity was detected in cell-free rumen fluid.     

Cellulase production by a thermophilic clostridium species

Strain M7, a thermophilic, anaerobic, terminally sporing bacterium (0.6 by 4.0 μm) was isolated from manure. It degraded filter paper in 1 to 2 days at 60 C in a minimal cellulose medium but was stimulated by yeast extract. It fermented a wide variety of sugars but produced cellulase only in cellulose or carboxymethyl-cellulose media. Cellulase synthesis not only was probably repressed by 0.4% glucose and 0.3% cellobiose, but also cellulase activity appeared to be inhibited by these sugars at these concentrations. Both C₁ cellulase (degrades native cellulose) and C_x cellulase (β-1,4-glucanase) activities in strain M7 cultures were assayed by measuring the liberation of reducing sugars with dinitrosalicylic acid. Both activities had optima at pH 6.5 and 67 C. One milliliter of a 48-h culture of strain M7 hydrolyzed 0.044-meq of glucose per min from cotton fibers. The cellulase(s) from strain M7 was extracellular, produced during exponential growth, but was not free in the growth medium until approximately 30% of the cellulose was hydrolyzed. Glucose and cellobiose were the major soluble products liberated from cellulose by the cellulase. ZnCl₂ precipitation appeared initially to be a good method for the concentration of cellulase activity, but subsequent purification was not successful. Isoelectric focusing indicated the presence of four C_x cellulases (pI 4.5, 6.3, 6.8, and 8.7). The rapid production and high activity of cellulases from this organism strongly support the basic premise that increased hydrolysis of native cellulose is possible at elevated temperature.     

Production and partial purification of cellulase from a novel fungus,Aspergillus flavus BS1

This study describes the isolation and characterization of a novel fungus, Aspergillus flavus BS1 and its cellulolytic activities with special emphasis on endoglucanase production. Preliminary screening studies showed that A. flavus BS1 was a potent strain for the production of cellulase. To study the cellulolytic activities in detail by submerged fermentation (SmF), productions of endoglucanase, exoglucanase, and β-glucosidase were estimated from the basal salt medium (BSM) supplemented with 1 % carboxy methyl cellulose (CMC). CMC medium supported the maximum yield of endoglucanase (2,793 U/ml) on day 5 of incubation at 28 °C and 150 rpm, which was higher than that obtained with naturally available supplements (flour) from banana, tapioca, potato, or banana peel. During cellulase production by solid-state fermentation, 10 % (w/w) tapioca flour in sawdust (teak wood) moisturized with BSM (1:2, w/v) supported maximum cellulase yield (5,408 U/g dry substrate) on day 3 at 28 °C, which was 2-fold higher than that obtained during SmF. The active cellulase was qualitatively estimated by polyacrylamide gel electrophoresis (PAGE). Native-PAGE (0.25 % CMC impregnated on the 10 % gel) activity staining with congo-red showed a clear zone for CMCase activity, whereas SDS-PAGE showed a distinct band. In conclusion, this study showed that A. flavus strain BS1 is a potent strain for the production of cellulase on lignocellulosic media, the hot enzyme for bioethanol production from the lignocellulosic biomass by SSF.     

Studies on Cellulose Hydrolysis by Acetivibrio cellulolyticus

Acetivibrio cellulolyticus extracellular cellulase extensively hydrolyzed crystalline celluloses such as Avicel (FMC Corp., Food and Pharmaceutical Products Div., Philadelphia, Pa.) but only if it was desalted and supplemented with Ca²⁺. The Ca²⁺ effect was one of increased enzyme stability in the presence of the ion. Although preincubation of the cellulase complex at 40°C for 5 h without added Ca²⁺ had a negligible effect on endoglucanase activity or on the subseqent hydrolysis of amorphous cellulose, the capacity of the enzyme to hydrolyze crystalline cellulose was almost completely lost. Adsorption studies showed that 90% of the Avicel-solubilizing component of the total enzyme preparation bound to 2% Avicel at 40°C. Under these conditions, only 15% of the endoglucanase and 25% of the protein present in the enzyme preparation adsorbed to the substrate. The protein profile of the bound enzyme, as analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, was complex and distinctly different from the profile observed for total cellulase preparations. The specific activity of A. cellulolyticus cellulase with respect to Avicel hydrolysis was compared with that of commercially available Trichoderma reesei cellulase.     

Feasibility test of utilizing Saccharophagus degradans 2-40T as the source of crude enzyme for the saccharification of lignocellulose

In the conversion of lignocellulose into high-value products, including fuels and chemicals, the production of cellulase and the enzymatic hydrolysis for producing fermentable sugar are the largest contributors to the cost of production of the final products. The marine bacterium Saccharophagus degradans 2-40^T can degrade more than ten different complex polysaccharides found in the ocean, including cellulose and xylan. Accordingly, S. degradans has been actively considered as a practical source of crude enzymes needed for the saccharification of lignocellulose to produce ethanol by others including a leading commercial company. However, the overall enzyme system of S. degradans for hydrolyzing cellulose and hemicellulose has not been quantitatively evaluated yet in comparison with commercial enzymes. In this study, the inductions and activities of cellulase and xylanase of cell-free lysate of S. degradans were investigated. The growth of S. degradans cells and the activities of cellulase and xylanase were promoted by adding 2 % of cellulose and xylan mixture (cellulose:xylan = 4:3 in mass ratio) to the aquarium salt medium supplemented with 0.2 % glucose. The specific cellulase activity of the cell-free lysate of S. degradans, as determined by the filter paper activity assay, was approximately 70 times lower than those of commercial cellulases, including Celluclast 1.5 L and Accellerase 1000. These results imply that significant improvement in the cellulase activity of S. degradans is needed for the industrial uses of S. degradans as the enzyme source.     

Improvement of halophilic cellulase production from locally isolated fungal strain

Halophilic cellulases from the newly isolated fungus, Aspergillus terreus UniMAP AA-6 were found to be useful for in situ saccharification of ionic liquids treated lignocelluloses. Efforts have been taken to improve the enzyme production through statistical optimization approach namely Plackett–Burman design and the Face Centered Central Composite Design (FCCCD). Plackett–Burman experimental design was used to screen the medium components and process conditions. It was found that carboxymethylcellulose (CMC), FeSO₄·7H₂O, NaCl, MgSO₄·7H₂O, peptone, agitation speed and inoculum size significantly influence the production of halophilic cellulase. On the other hand, KH₂PO₄, KOH, yeast extract and temperature had a negative effect on enzyme production. Further optimization through FCCCD revealed that the optimization approach improved halophilic cellulase production from 0.029 U/ml to 0.0625 U/ml, which was approximately 2.2-times greater than before optimization.     

Shear inactivation of cellulase of Trichoderma reesei

Inactivation of the cellulase of Trichoderma reesei (EC 3.2.1.4) by shear, is of sufficient magnitude to merit consideration in the design of equipment for the enzymatic hydrolysis of cellulose. The inac inactivation constant, k_d, is a function of the flow rate of the enzyme solution through a fine capillary tube. k_d increased slowly at low shear stress, and much more rapidly when the shear stress was greater than 15 dynes cm^?2.     

Effect of cellulose physical characteristics, especially the water sorption value, on the efficiency of its hydrolysis catalyzed by free or immobilized cellulase

Cellulase, an enzymatic complex that synergically promotes the degradation of cellulose to glucose and cellobiose, free or adsorbed onto Si/SiO₂ wafers at 60 °C has been employed as catalyst in the hydrolysis of microcrystalline cellulose (Avicel), microcrystalline cellulose pre-treated with hot phosphoric acid (CP), cotton cellulose (CC) and eucalyptus cellulose (EC). The physical characteristics such as index of crystallinity (I_C), degree of polymerization (DP) and water sorption values were determined for all samples. The largest conversion rates of cellulose into the above-mentioned products using free cellulase were observed for samples with the largest water sorption values; conversion rates showed no correlation with either I_C or DP of the biopolymer. Cellulose with large water sorption value possesses large pore volumes, hence higher accessibility. The catalytic efficiency of immobilized cellulase could not be correlated with the physical characteristics of cellulose samples. The hydrolysis rates of the same cellulose samples with immobilized cellulase were lower than those by the free enzyme, due to the diffusion barrier (biopolymer chains approaching to the immobilized enzyme) and less effective contact between the enzyme active site and its substrate. Immobilized cellulase, unlike its free counterpart, can be recycled at least six times without loss of catalytic activity, leading to higher overall cellulose conversion.