A Microfluidic Channel Method for Rapid Drug-Susceptibility Testing of Pseudomonas aeruginosa

The recent global increase in the prevalence of antibiotic-resistant bacteria and lack of development of new therapeutic agents emphasize the importance of selecting appropriate antimicrobials for the treatment of infections. However, to date, the development of completely accelerated drug susceptibility testing methods has not been achieved despite the availability of a rapid identification method. We proposed an innovative rapid method for drug susceptibility testing for Pseudomonas aeruginosa that provides results within 3 h. The drug susceptibility testing microfluidic (DSTM) device was prepared using soft lithography. It consisted of five sets of four microfluidic channels sharing one inlet slot, and the four channels are gathered in a small area, permitting simultaneous microscopic observation. Antimicrobials were pre-introduced into each channel and dried before use. Bacterial suspensions in cation-adjusted Mueller–Hinton broth were introduced from the inlet slot and incubated for 3 h. Susceptibilities were microscopically evaluated on the basis of differences in cell numbers and shapes between drug-treated and control cells, using dedicated software. The results of 101 clinically isolated strains of P. aeruginosa obtained using the DSTM method strongly correlated with results obtained using the ordinary microbroth dilution method. Ciprofloxacin, meropenem, ceftazidime, and piperacillin caused elongation in susceptible cells, while meropenem also induced spheroplast and bulge formation. Morphological observation could alternatively be used to determine the susceptibility of P. aeruginosa to these drugs, although amikacin had little effect on cell shape. The rapid determination of bacterial drug susceptibility using the DSTM method could also be applicable to other pathogenic species, and it could easily be introduced into clinical laboratories without the need for expensive instrumentation.     

Rates of Digestion of Bacteria by Marine Phagotrophic Protozoa: Temperature Dependence

The effect of temperature on length of time for digestion of bacteria was evaluated, by using fluorescently labeled bacteria (FLB), for phagotrophic flagellates and ciliates isolated from coastal northwest Mediterranean waters. Accumulation of FLB in protozoan food vacuoles was followed until a plateau of FLB per cell occurred; then after a 1:10 dilution of FLB with unlabeled bacteria, disappearance of FLB in food vacuoles was monitored. For both 3- to 5-μm flagellates and 10- to 40-μm ciliates, the absolute linear slopes of FLB uptake and disappearance were nearly identical in individual experiments over a temperature range of 12 to 22°C. We inferred from these results that the leveling off of the uptake curves resulted when equilibrium between ingestion and digestion of bacteria was attained. The time to leveling off then represented the average time needed for complete digestion of the bacteria ingested at the start of the experiment, and the inverse of this time represented a bacterial digestion rate. The digestion rate increased exponentially from 12 to 22°C for both a mixed flagellate assemblage and the oligotrichous ciliate Strombidium sulcatum, with a Q₁₀ of 2.8 for the flagellates and 2.0 for the ciliate. Although bacterial ingestion rates varied greatly, depending on protozoan cell size, total bacterial abundance, and temperature, digestion times appeared to be significantly influenced only by protozoan cell size (or type of protozoan) and by temperature.     

An Improved Mechanical Testing Method to Assess Bone-implant Anchorage

Recent advances in material science have led to a substantial increase in the topographical complexity of implant surfaces, both on a micro- and a nano-scale. As such, traditional methods of describing implant surfaces - namely numerical determinants of surface roughness - are inadequate for predicting in vivo performance. Biomechanical testing provides an accurate and comparative platform to analyze the performance of biomaterial surfaces. An improved mechanical testing method to test the anchorage of bone to candidate implant surfaces is presented. The method is applicable to both early and later stages of healing and can be employed for any range of chemically or mechanically modified surfaces - but not smooth surfaces. Custom rectangular implants are placed bilaterally in the distal femora of male Wistar rats and collected with the surrounding bone. Test specimens are prepared and potted using a novel breakaway mold and the disruption test is conducted using a mechanical testing machine. This method allows for alignment of the disruption force exactly perpendicular, or parallel, to the plane of the implant surface, and provides an accurate and reproducible means for isolating an exact peri-implant region for testing.     

A High Speed Detection Platform Based on Surface-Enhanced Raman Scattering for Monitoring Antibiotic-Induced Chemical Changes in Bacteria Cell Wall

Rapid and accurate diagnosis for pathogens and their antibiotic susceptibility is critical for controlling bacterial infections. Conventional methods for determining bacterium''s sensitivity to antibiotic depend mostly on measuring the change of microbial proliferation in response to the drug. Such “biological assay” inevitably takes time, ranging from days for fast-growing bacteria to weeks for slow-growers. Here, a novel tool has been developed to detect the “chemical features” of bacterial cell wall that enables rapid identification of drug resistant bacteria within hours. The surface-enhanced Raman scattering (SERS) technique based on our newly developed SERS-active substrate was applied to assess the fine structures of the bacterial cell wall. The SERS profiles recorded by such a platform are sensitive and stable, that could readily reflect different bacterial cell walls found in Gram-positive, Gram-negative, or mycobacteria groups. Moreover, characteristic changes in SERS profile were noticed in the drug-sensitive bacteria at the early period (i.e., ∼1 hr) of antibiotic exposure, which could be used to differentiate them from the drug-resistant ones. The SERS-based diagnosis could be applied to a single bacterium. The high-speed SERS detection represents a novel approach for microbial diagnostics. The single-bacterium detection capability of SERS makes possible analyses directly on clinical specimen instead of pure cultured bacteria.     

On‐site genetic analysis for species identification using lab‐on‐a‐chip

This paper presents a microfluidic device capable of performing genetic analysis on dung samples to identify White Rhinoceros (Ceratotherium simum). The development of a microfluidic device, which can be used in the field, offers a portable and cost‐effective solution for DNA analysis and species identification to aid conservation efforts. Optimization of the DNA extraction processes produced equivalent yields compared to conventional kit‐based methods within just 5 minutes. The use of a color‐changing loop‐mediated isothermal amplification reaction for simultaneous detection of the cytochrome B sequence of C. simum enabled positive results to be obtained within as little as 30 minutes. Field testing was performed at Knowsley Safari to demonstrate real‐world applicability of the microfluidic device for testing of biological samples.     

Density-dependent adaptive resistance allows swimming bacteria to colonize an antibiotic gradient

During antibiotic treatment, antibiotic concentration gradients develop. Little is know regarding the effects of antibiotic gradients on populations of nonresistant bacteria. Using a microfluidic device, we show that high-density motile Escherichia coli populations composed of nonresistant bacteria can, unexpectedly, colonize environments where a lethal concentration of the antibiotic kanamycin is present. Colonizing bacteria establish an adaptively resistant population, which remains viable for over 24 h while exposed to the antibiotic. Quantitative analysis of multiple colonization events shows that collectively swimming bacteria need to exceed a critical population density in order to successfully colonize the antibiotic landscape. After colonization, bacteria are not dormant but show both growth and swimming motility under antibiotic stress. Our results highlight the importance of motility and population density in facilitating adaptive resistance, and indicate that adaptive resistance may be a first step to the emergence of genetically encoded resistance in landscapes of antibiotic gradients.     

Antibiotic Susceptibilities of Bacteria Isolated within the Oral Flora of Florida Blacktip Sharks: Guidance for Empiric Antibiotic Therapy

Sharks possess a variety of pathogenic bacteria in their oral cavity that may potentially be transferred into humans during a bite. The aim of the presented study focused on the identification of the bacteria present in the mouths of live blacktip sharks, Carcharhinus limbatus, and the extent that these bacteria possess multi-drug resistance. Swabs were taken from the oral cavity of nineteen live blacktip sharks, which were subsequently released. The average fork length was 146 cm (±11), suggesting the blacktip sharks were mature adults at least 8 years old. All swabs underwent standard microbiological work-up with identification of organisms and reporting of antibiotic susceptibilities using an automated microbiology system. The oral samples revealed an average of 2.72 (±1.4) bacterial isolates per shark. Gram-negative bacteria, making up 61% of all bacterial isolates, were significantly (p<0.001) more common than gram-positive bacteria (39%). The most common organisms were Vibrio spp. (28%), various coagulase-negative Staphylococcus spp. (16%), and Pasteurella spp. (12%). The overall resistance rate was 12% for all antibiotics tested with nearly 43% of bacteria resistant to at least one antibiotic. Multi-drug resistance was seen in 4% of bacteria. No association between shark gender or fork length with bacterial density or antibiotic resistance was observed. Antibiotics with the highest overall susceptibility rates included fluoroquinolones, 3^rd generation cephalosporins and sulfamethoxazole/trimethoprim. Recommended empiric antimicrobial therapy for adult blacktip shark bites should encompass either a fluoroquinolone or combination of a 3^rd generation cephalosporin plus doxycycline.     

益生乳酸菌的纸片扩散法药敏性试验评价

乳酸菌菌株的药敏性评价是目前国际上益生乳酸菌安全性评价的首要内容, 然而用于乳酸菌药敏性测试的相关国际通引标准还未出台。本文就药敏试验使用的培养基进行了探讨, 并从中选取了合适的商品化培养基——RCA用于乳酸菌的药敏性测试。选取的培养基适合目前市场上常用益生菌的生长, 经方法优化后可得到满意的结果, 为今后制定针对乳酸菌的抗菌药物敏感性试验执行标准提供了一定依据。随后采用纸片扩散法对分属于4个属的9株乳酸菌进行了19类51种抗生素的敏感性测定, 较全面地了解了这些菌株的药敏谱。     

Synthesis,biological activities and docking studies of pleuromutilin derivatives with piperazinyl urea linkage

Antibiotics resistance is becoming increasingly common, involving almost all antibiotics on the market. Diseases caused by drug resistant bacteria, such as MRSA, have high mortality and negatively affect public health. The development of new drugs would be an effective means of solving this problem. Modifications based on bioactive natural products could greatly shorten drug development time and improve success rate. Pleuromutilin, a natural product from the basidiomycete bacterial species, is a promising antibiotic candidate. In this study, a series of novel pleuromutilin derivatives possessing piperazinyl urea linkage were efficiently synthesised, and their antibacterial activities and bactericidal properties were evaluated via MIC, MBC and Time-kill kinetics assays. The results showed that all compounds exhibited potent activities against tested strains, especially MRSA strains with MIC values as low as 0.125 μg/mL; 8 times lower than that of marketed antibiotic Tiamulin. Docking studies indicate substituted piperazinyl urea derivatives could provide hydrogen bonds and initiate π-π stacking between molecules and surrounding residues.     

Impact on degradation of antibiotics from poultry litter using Autothermal Thermophilic Aerobic Digestion (ATAD)

Tetracycline (TC) is one of the common antibiotics which is widely used in livestock growth promotion. The prevalent application TC may pave way to progression of antibiotic resistant bacteria. The main objective of this study is to determine the effect of Autothermal Thermophilic Aerobic Digestion (ATAD) on the fate of TC residues found in digested poultry litter. For the determination of TC in poultry litter, thin layer chromatography (TLC) and high performance liquid chromatography (HPLC) were done. TLC result revealed that the R_f value of standard TC on TLC plate was 0.97 which correlates with the R_f value of TC at 0, 12, 24 and 36 h of digested poultry litter sample and not at 48, 60 and 72 h. HPLC chromatogram revealed that the limits of detection and the recovery were 5 µg/kg and 96% for standard TC. Linear correlation curves were obtained over the series of 100–500 µg/mL with correlation coefficient of 0.996 and the calibration curve was Y = 0.001X + 0.066. These results confirmed the degradation of TC in ATAD digestion of poultry litter by abiotic processes.     

A protein-based oxygen biosensor for high-throughput monitoring of cell growth and cell viability

Fluorescently labeled hemocyanin has been previously proposed as an oxygen sensor. In this study, we explored the efficacy of this biosensor for monitoring the biological oxygen consumption of bacteria and its use in testing bacterial cell growth and viability of Escherichia coli, Pseudomonas aeruginosa, Paracoccus denitrificans, and Staphylococcus simulans. Using a microwell plate, the time courses for the complete deoxygenation of samples with different initial concentrations of cells were obtained and the doubling times were extracted. The applicability of our fluorescence-based cell growth assay as an antibacterial drug screening method was also explored. The results provide a proof-of-principle for a simple, quantitative, and sensitive method for high-throughput monitoring of prokaryotic cell growth and antibiotic susceptibility screening.     

Genome analysis of probiotic bacteria for antibiotic resistance genes

To date, probiotic bacteria are used in the diet and have various clinical applications. There are reports of antibiotic resistance genes in these bacteria that can transfer to other commensal and pathogenic bacteria. The aim of this study was to use whole-genome sequence analysis to identify antibiotic resistance genes in a group of bacterial with probiotic properties. Also, this study followed existing issues about the importance and presence of antibiotic resistance genes in these bacteria and the dangers that may affect human health in the future. In the current study, a collection of 126 complete probiotic bacterial genomes was analyzed for antibiotic resistance genes. The results of the current study showed that there are various resistance genes in these bacteria that some of them are transferable to other bacteria. The tet(W) tetracycline resistance gene was more than other antibiotic resistance genes in these bacteria and this gene was found in Bifidobacterium and Lactobacillus. In our study, the most numbers of antibiotic resistance genes were transferred with mobile genetic elements. We propose that probiotic companies before the use of a micro-organism as a probiotic, perform an antibiotic susceptibility testing for a large number of antibiotics. Also, they perform analysis of complete genome sequence for prediction of antibiotic resistance genes.

     

Conserved sequence motifs among bacterial,eukaryotic, and archaeal phosphatases that define a new phosphohydrolase superfamily.

Members of a new molecular family of bacterial nonspecific acid phosphatases (NSAPs), indicated as class C, were found to share significant sequence similarities to bacterial class B NSAPs and to some plant acid phosphatases, representing the first example of a family of bacterial NSAPs that has a relatively close eukaryotic counterpart. Despite the lack of an overall similarity, conserved sequence motifs were also identified among the above enzyme families (class B and class C bacterial NSAPs, and related plant phosphatases) and several other families of phosphohydrolases, including bacterial phosphoglycolate phosphatases, histidinol-phosphatase domains of the bacterial bifunctional enzymes imidazole-glycerolphosphate dehydratases, and bacterial, eukaryotic, and archaeal phosphoserine phosphatases and threalose-6-phosphatases. These conserved motifs are clustered within two domains, separated by a variable spacer region, according to the pattern [FILMAVT]-D-[ILFRMVY]-D-[GSNDE]-[TV]-[ILVAM]-[AT S VILMC]-X-¿YFWHKR)-X-¿YFWHNQ¿-X( 102,191)-¿KRHNQ¿-G-D-¿FYWHILVMC¿-¿QNH¿-¿FWYGP¿-D -¿PSNQYW¿. The dephosphorylating activity common to all these proteins supports the definition of this phosphatase motif and the inclusion of these enzymes into a superfamily of phosphohydrolases that we propose to indicate as "DDDD" after the presence of the four invariant aspartate residues. Database searches retrieved various hypothetical proteins of unknown function containing this or similar motifs, for which a phosphohydrolase activity could be hypothesized.     

Evaluation of a Scanner-Assisted Colorimetric MIC Method for Susceptibility Testing of Gram-Negative Fermentative Bacteria

We describe the ScanMIC method, a colorimetric MIC method for susceptibility testing of gram-negative fermentative bacteria. The method is a slight modification of the National Committee for Clinical Laboratory Standards (NCCLS) recommended broth microdilution method that uses a redox indicator 2,3,5-triphenyltetrazolium chloride (TTC) to enhance the estimate of bacterial growth inhibition in a microplate and a flatbed scanner to capture the microplate image. In-house software was developed to transform the microplate image into numerical values based on the amount of bacterial growth and to generate the MICs automatically. The choice of indicator was based on its low toxicity and ease of reading by scanner. We compared the ScanMIC method to the NCCLS recommended broth microdilution method with 197 coliform strains against seven antibacterial agents. The interpretative categorical agreement was obtained in 92.4% of the assays, and the agreement for MIC differences (within ±1 log₂ dilution) was obtained in 96% for ScanMIC versus broth microdilution and 97% for a two-step incubation colorimetric broth microdilution versus the broth microdilution method. The method was found to be labor-saving, not to require any initial investment, and to show reliable results. Thus, the ScanMIC method could be useful for epidemiological surveys that include susceptibility testing of bacteria.     

Generalisability and Cost-Impact of Antibiotic-Impregnated Central Venous Catheters for Reducing Risk of Bloodstream Infection in Paediatric Intensive Care Units in England

Background

We determined the generalisability and cost-impact of adopting antibiotic-impregnated CVCs in all paediatric intensive care units (PICUs) in England, based on results from a large randomised controlled trial (the CATCH trial; ISRCTN34884569).

Methods

BSI rates using standard CVCs were estimated through linkage of national PICU audit data (PICANet) with laboratory surveillance data. We estimated the number of BSI averted if PICUs switched from standard to antibiotic-impregnated CVCs by applying the CATCH trial rate-ratio (0.40; 95% CI 0.17,0.97) to the BSI rate using standard CVCs. The value of healthcare resources made available by averting one BSI as estimated from the trial economic analysis was £10,975; 95% CI -£2,801,£24,751.

Results

The BSI rate using standard CVCs was 4.58 (95% CI 4.42,4.74) per 1000 CVC-days in 2012. Applying the rate-ratio gave 232 BSI averted using antibiotic CVCs. The additional cost of purchasing antibiotic-impregnated compared with standard CVCs was £36 for each child, corresponding to additional costs of £317,916 for an estimated 8831 CVCs required in PICUs in 2012. Based on 2012 BSI rates, management of BSI in PICUs cost £2.5 million annually (95% uncertainty interval: -£160,986, £5,603,005). The additional cost of antibiotic CVCs would be less than the value of resources associated with managing BSI in PICUs with standard BSI rates >1.2 per 1000 CVC-days.

Conclusions

The cost of introducing antibiotic-impregnated CVCs is less than the cost associated with managing BSIs occurring with standard CVCs. The long-term benefits of preventing BSI could mean that antibiotic CVCs are cost-effective even in PICUs with extremely low BSI rates.     

伤口分泌物的病原菌分布及耐药性分析

目的调查福建省龙岩市第二医院伤口分泌物病原菌的分布及耐药情况,为合理应用抗生素提供依据。方法收集2012年1月至2013年5月患者伤口分泌物标本,采用常规方法进行分离培养,用VITEK-2 Compact全自动微生物分析仪系统进行鉴定及药敏分析。结果送检503份标本,培养阳性272份,阳性率为54. 1% ;病原菌检出343株,其中革兰阴性菌189株占55. 1%,革兰阳性菌151株占44.0%,真菌3株占0.9% ;前5位的病原菌分别为金黄色葡萄球菌、凝固酶阴性葡萄球菌、铜绿假单胞菌、大肠埃希菌、鲍曼不动杆菌。耐甲氧西林金黄色葡萄球菌（MRSA）和耐甲氧西林凝固酶阴性葡萄球菌（MRCNS）的检出率分别是30.4%、82. 1%。粪肠球菌中耐高浓度氨基糖苷类肠球菌（HLAR）的检出率为55%。革兰阳性菌对万古霉素、替加环素、利奈唑胺未出现耐药菌株。铜绿假单胞菌、肠杆菌科细菌对亚胺培南的耐药率分别为5. 6%、0。大肠埃希菌中超广谱P-内酰胺酶（ESBL）的检出率是42.9%。鲍曼不动杆菌对头孢哌酮/舒巴坦的耐药率最低为25.0%,对其他抗菌药物耐药严重,多数抗菌药物的耐药率均〉45%。结论伤口感染的主要病原菌是革兰阴性菌,多重耐药菌株比例较高,临床应根据药敏结果合理选用抗生素,减少新的耐药菌株出现。     

Relationships between Biovolume and Biomass of Naturally Derived Marine Bacterioplankton

Microscopic estimation of bacterial biomass requires determination of both biovolume and biovolume-to-biomass conversion. Both steps have uncertainty when applied to the very small bacteria typically found in natural seawater. In the present study, natural bacterioplankton assemblages were freshly collected, passed through 0.6-μm-pore-size Nuclepore filters to remove larger particulate materials, and diluted for growth in 0.22-μm-pore-size Millipore filter-sterilized unenriched seawater. This provided cells comparable in size and morphology to those in natural seawater, but the cultures were free of the interfering particulate detritus naturally present. Cells were collected on glass-fiber GF/F filters, and biovolumes were corrected for cells passing these filters; C and N were measured with a CHN analyzer. Our criteria for size measurement by epifluorescence photomicrography were confirmed with fluorescent microspheres of known diameters. Surprisingly, in six cultures with average per-cell biovolumes ranging from 0.036 to 0.073 μm³, the average per-cell carbon biomass was relatively constant at 20 ± 0.08 fg of C (mean ± standard error of the mean). The biovolume-to-biomass conversion factor averaged 0.38 ± 0.05 g of C cm⁻³, which is about three times higher than the value previously estimated from Escherichia coli, and decreased with increasing cell volume. The C:N ratio was 3.7 ± 0.2. We conclude that natural marine bacterial biomass and production may be higher than was previously thought and that variations in bacterial size may not reflect variations in biomass per cell.     

BioTimer Assay, a new method for counting Staphylococcus spp. in biofilm without sample manipulation applied to evaluate antibiotic susceptibility of biofilm

The medical device-related infections are frequently a consequence of Staphylococcus biofilm, a lifestyle enhancing bacterial resistance to antibiotics. Antibiotic susceptibility tests are usually performed on planktonic forms of clinical isolates. Some methods have been developed to perform antibiotic susceptibility tests on biofilm. However, none of them counts bacterial inoculum. As antibiotic susceptibility is related to bacterial inoculum, the test results could be mistaken. Here, a new method, BioTimer Assay (BTA), able to count bacteria in biofilm without any manipulation of samples, is presented. Moreover, the BTA method is applied to analyze antibiotic susceptibility of six Staphylococcus strains in biofilm and to determine the number of viable bacteria in the presence of sub-inhibitory doses of four different antibiotics. To validate BTA, the new method was compared to reference methods both for counting and antibiotic susceptibility tests. A high agreement between BTA and reference methods is found on planktonic forms. Therefore, BTA was employed to count bacteria in biofilm and to analyze biofilm antibiotic susceptibility. Results confirm the high resistance to antibiotics of Staphylococcus biofilm. Moreover, BTA counts the number of viable bacteria in the presence of sub-inhibitory doses of antibiotics. The results show that the number of viable bacteria depends on sub-inhibitory doses, age of biofilm and type of antibiotic. In particular, differently to gentamicin and ampicillin, sub-inhibitory doses of ofloxacin and azithromycin reduce the number of viable bacteria at lower extent in young than in old biofilm. In conclusion, BTA is a reliable, rapid, easy-to-perform, and versatile method, and it can be considered a useful tool to analyze antibiotic susceptibility of Staphylococcus spp. in biofilm.     

Methods to Inhibit Bacterial Pyomelanin Production and Determine the Corresponding Increase in Sensitivity to Oxidative Stress

Pyomelanin is an extracellular red-brown pigment produced by several bacterial and fungal species. This pigment is derived from the tyrosine catabolism pathway and contributes to increased oxidative stress resistance. Pyomelanin production in Pseudomonas aeruginosa is reduced in a dose dependent manner through treatment with 2-[2-nitro-4-(trifluoromethyl)benzoyl]-1,3-cyclohexanedione (NTBC). We describe a titration method using multiple concentrations of NTBC to determine the concentration of drug that will reduce or abolish pyomelanin production in bacteria. The titration method has an easily quantifiable outcome, a visible reduction in pigment production with increasing drug concentrations. We also describe a microtiter plate method to assay antibiotic minimum inhibitory concentration (MIC) in bacteria. This method uses a minimum of resources and can easily be scaled up to test multiple antibiotics in one microtiter plate for one strain of bacteria. The MIC assay can be adapted to test the affects of non-antibiotic compounds on bacterial growth at specific concentrations. Finally, we describe a method for testing bacterial sensitivity to oxidative stress by incorporating H₂O₂ into agar plates and spotting multiple dilutions of bacteria onto the plates. Sensitivity to oxidative stress is indicated by reductions in colony number and size for the different dilutions on plates containing H₂O₂ compared to a no H₂O₂ control. The oxidative stress spot plate assay uses a minimum of resources and low concentrations of H₂O₂. Importantly, it also has good reproducibility. This spot plate assay could be adapted to test bacterial sensitivity to various compounds by incorporating the compounds in agar plates and characterizing the resulting bacterial growth.     

Bacillus subtilis Bacteria Generate an Internal Mechanical Force within a Biofilm

A key issue in understanding why biofilms are the most prevalent mode of bacterial life is the origin of the degree of resistance and protection that bacteria gain from self-organizing into biofilm communities. Our experiments suggest that their mechanical properties are a key factor. Experiments on pellicles, or floating biofilms, of Bacillus subtilis showed that while they are multiplying and secreting extracellular substances, bacteria create an internal force (associated with a −80 ± 25 Pa stress) within the biofilms, similar to the forces that self-equilibrate and strengthen plants, organs, and some engineered buildings. Here, we found that this force, or stress, is associated with growth-induced pressure. Our observations indicate that due to such forces, biofilms spread after any cut or ablation by up to 15–20% of their initial size. The force relaxes over very short timescales (tens of milliseconds). We conclude that this force helps bacteria to shape the biofilm, improve its mechanical resistance, and facilitate its invasion and self-repair.