Synthesis and structural studies of heteroleptic complexes of ytterbium(III) involving aryloxy- or alkoxy- and cyclopentadienyl ligands

Treatment of tris-cyclopentadienyl-ytterbium in thf with one equivalent of 2,6-di(tert-butyl)phenol, N,N-dimethyl-2-aminoethanol or N,N-diethyl-2-aminoethanol resulted in substitution of one cyclopentadienyl ligand and formation of [YbCp₂(O-C₆H₃^tBu-2,6)(thf)] (1), [{YbCp₂(μ-OCH₂CH₂NMe₂)}₂] (2) or [{YbCp₂(μ-OCH₂CH₂NEt₂)}₂] · (thf)₂ (3), respectively. All compounds were characterised by spectroscopic and X-ray crystallographic techniques, the latter two also being studied by variable temperature ¹H NMR spectroscopy. Compound (1) is mononuclear with the Yb centre bound by two η⁵-cyclopentadienyl ligands one O-bound thf and an O-bound phenoxy ligand. Compounds (2) and (3) are centrosymmetric dimers with the Yb centre bound by two η⁵-cyclopentadienyl ligands, while the bidentate ligands chelate the metal centre and also bridge to the adjacent Yb through the alkoxy oxygen atom. Variable temperature ¹H NMR studies on compounds (2) and (3) show a solution-state equilibrium between the dimeric solid-state structure and one with the nitrogen atoms non-bound to Yb.     

Substitution reactions of tetrahydrofuran in [Cr(thf)3Cl3] with mono and bidentate N-donor ligands: X-ray crystal structures of [Cr(bipy)(OH2)Cl3] and [HpyNH2][Cr(bipy)Cl4]

Substitution of thf ligands in [Cr(thf)₃Cl₃] and [Cr(thf)₂(OH₂)Cl₃] was investigated. 2,2′-Bipyridine (bipy) was reacted with [Cr(thf)₃Cl₃] to form [Cr(bipy)(thf)Cl₃] (1), which was subsequently reacted with water to give [Cr(bipy)(OH₂)Cl₃] (2). Reaction of 1 with acetonitrile (CH₃CN), pyridine (py) and pyridine derivatives to form [Cr(bipy)(L)Cl₃] (L = CH₃CN 3, py 4 and 4-pyR with R = NH₂5, Bu^t6 and Ph 7). In addition, the substitution of bipy in [Cr(thf)₃Cl₃] was followed by ¹H NMR spectroscopy at room temperature, which showed completion of the reaction in ca. 100 min. Complex 2 was characterised by single crystal X-ray diffraction. The theoretical powder diffraction pattern of 2 was compared to the experimentally obtained powder X-ray diffraction pattern, and shows excellent agreement. The dimer [Cr₂(bipy)₂Cl₄(μ-Cl)₂] was cleaved asymmetrically to give the anionic complex [Cr(bipy)Cl₄]⁻ (8) and [Cr(bipy)₂Cl₂]⁺ (9). Complexes 8 and 9 were characterised by single crystal X-ray diffraction.     

Oxomolybdenum(III, IV and V) complexes of thiofunctional ligands

Reaction of [MoO₂(acac)₂] with (S is a thioether, S′ a thiophenolate function) yielded the compound Li₇(thf)₁₇{MoO}₈ · 10thf · hexane, where {MoO}₈ represents one 1, three (2, linked, via the oxo group, to [Li(thf)₃]⁺) and two (3a, linked by two [Li(thf)₂]⁺).A mixed-valent variant of 3, (3b, with an additional[Li(thf)₃]⁺ attached to S′), was also identified. The compounds model features pertinent to oxo-transferases containing the molybdopterin cofactor.     

Preferential azido bridging regulating the structural aspects in cobalt(III) and copper(II)-Schiff base complexes: Syntheses, magnetostructural correlations and catalytic studies

A tridentate NNO donor Schiff base ligand [(1Z,3E)-3-((pyridin-2-yl)methylimino)-1-phenylbut-1-en-1-ol = LH] in presence of azide ions coordinates with cobalt(II) and copper(II) ions giving rise to three new coordination complexes [Co₂(L)₂(μ_1,1-N₃)₂(N₃)₂] (1), [Cu₂(L)₂(μ_1,3-N₃)]·ClO₄ (2) and [(μ_1,1-N₃)₂Cu₅(μ-OL)₂(μ_1,1-N₃)₄(μ_1,1,1-N₃)₂]_n (3). The complexes have been characterized by elemental analysis, FT-IR, UV-Vis spectral studies, and single crystal X-ray diffraction studies. These complexes demonstrate that under different synthetic conditions the azide ions and the Schiff base ligand (LH) show different coordination modes with cobalt(II) and copper(II) ions, giving rise to unusual dinuclear and polynuclear species (1, 2 and 3) whose structural variations are discussed. Magneto-structural correlation for the very rare singly μ_1,3-N₃ bridged Cu^II-Schiff base dinuclear species (2) has been studied. In addition, the catalytic properties of 1 for alkene oxidation and the general catalase-like activity behavior of 2 have been discussed.     

Reduction of diruthenium(II,III) carboxylate compounds with hydroquinone: a facile preparation of diruthenium(II) complexes

The synthesis of the diruthenium(II) compounds [Ru₂(μ-O₂CR)₄(MeOH)₂] [R = Me (1), Ph (2), CMePh₂ (3) C₆H₄-p-OMe (4), C₆H₄-p-CMe₃ (5)] by reaction of with hydroquinone, under a nitrogen atmosphere, in the presence of a base is described. This reaction constitutes an easy via to the preparation of diruthenium(II) compounds. The structure of the complexes [Ru₂(μ-O₂CMe)₄(MeOH)₂] (1) and [Ru₂(μ-O₂CPh)₄(thf)₂] (2b) is established by single crystal X-ray diffraction. These compounds show a diruthenium(II) unit bridged by four carboxylate ligands with the axial positions occupied by methanol and tetrahydrofuran molecules for 1 and 2b, respectively. Complex 1 shows, in the solid state, polymeric chains in which the molecules [Ru₂(μ-O₂CMe)₄(MeOH)₂] are linked by hydrogen bonds.     

Hydrothermal synthesis of copper complexes of 4′-pyridyl terpyridine: From discrete monomer to zigzag chain polymer

Seven copper complexes [Cu(L1)I₂] (1), [Cu₂(L1)₂I₂]₂[Cu₂(μ-I)₂I₂] (2), [Cu(L2)I₂] (3), [Cu₂(L2)(μ-I)I(PPh₃)] (4), [Cu₄(L2)₂(μ-I)₂I₂] (5), {[Cu(L2)I]₂[Cu₂(μ-I)₂I₂]}_n (6) and [Cu₂(L2)(μ-I)₂]_n (7) have been prepared by reactions of ligands: 4′-(2-pyridyl)-2,2′:6′,2″-terpyridine (L1) and 4′-(3-pyridyl)-2,2′:6′,2″-terpyridine (L2) with CuI in hydrothermal conditions, respectively. By alternating the oxidations states of the metal centers, increasing stoichiometric metal/ligand ratio and introducing a second ligand, the compounds, were successfully developed from mononuclear (1 and 3) to multinuclear (2, 4 and 5) and polymers (6 and 7). The synthesis of these compounds may provide an approach for the construction of coordination compounds of 4′-pyridyl terpyridine with different nuclearity.     

Electrochemical oxidation of ethanol using Nafion electrodes modified with heterobimetallic catalysts

Chemically modified electrodes were prepared by adsorption of Nafion/catalyst films of the type Nafion/Cp(PPh₃)Ru(μ-I)(μ-dppm)PdCl₂ (N1), Nafion/[η⁵-C₅H₄CH₂CH₂(NHMe₂)⁺]Ru(PPh₃)(μ-I)(μ-dppm)PtCl₂ (N2), Nafion/[η⁵-C₅H₄CH₂CH₂(NHMe₂)⁺]Ru(PPh₃)(μ-Cl)(μ-dppm)PdCl₂ (N3), Nafion/Cp(CO)Fe(μ-I)(μ-dppm)PdI₂ (N4) and Nafion/Cp(CO)Ru(μ-I)(μ-dppm)PtI₂ (N5) on glassy and vitreous carbon electrodes. Cyclic voltammetry and bulk electrolysis experiments were performed to assess the ability of these modified electrodes to electrocatalytically oxidize ethanol. Cyclic voltammograms using the N1-N5 modified glassy carbon electrodes displayed significant catalytic activity compared to oxidation of ethanol catalyzed by 1 in homogeneous solution. Bulk electrolysis of ethanol using electrodes coated with Nafion supported complexes 1-3 resulted in formation of the two- and four-electron oxidation products acetaldehyde and acetic acid, respectively, whilst bulk electrolysis using the complexes 4 and 5 produced only acetaldehyde.     

β-Diiminatolanthanoid(III) halides revisited

The crystalline compounds [LnCl₂(L)(thf)₂] [Ln = Ce (1), Tb (2), Yb (3)], [NdI₂(L)(thf)₂] (4), [LnCl(L′)₂] [Ln = Tb (5), Yb (6) (a known compound)] and [YbCl(L′′)(μ-Cl)₂Li(OEt₂)₂] (7) have been prepared [L = {N(C₆H₃Prⁱ₂-2,6)C(H)}₂CPh, L′ = {N(SiMe₃)C(Ph)}₂CH, L′′ = {N(SiMe₃)C(C₆H₄Ph-4)}₂CH]. The X-ray molecular structures of 2-7 have been established; in each, the monoanionic ligand L, L′ or L′′ is N,N′-chelating and essentially π-delocalised. Each of 1-7 was prepared from the appropriate LnCl₃, or for 4 [NdI₃(thf)₂], and an equivalent portion of the appropriate alkali metal [Li for 7, Na for 2, 3 and 5, or K for 1, 4 and 6] β-diiminate in thf; the isolation of exclusively 5 and 6 (rather than the L′ analogues of 2 or 3) is noteworthy, as is the structure of 7 which has no precedent in Group 3 or 4f metal β-diiminato chemistry.     

Rhenium(III) and technetium(III) complexes with 2-mercapto-1,3-azole ligands and X-ray crystal structures

Reactions of labile [MCl₃(PPh₃)₂(NCMe)] (M = Tc, Re) precursors with 1H-benzoimidazole-2-thiol (H₂L¹), 5-methyl-1H-benzoimidazole-2-thiol (H₂L²) and 1H-imidazole-2-thiol (H₂L³), in the presence of PPh₃ and [AsPh₄]Cl gave a new series of trigonal bipyramidal M(III) complexes [AsPh₄]{[M(PPh₃)Cl(H₂L^1-3)₃]Cl₃} (M = Re, 1-3; M = Tc, 4-6). The molecular structures of 1 and 3 were determined by X-ray diffraction. When the reactions were carried out with benzothiazole-2-thiol (HL⁴) and benzoxazole-2-thiol (HL⁵), neutral paramagnetic monosubstituted M(III) complexes [M(PPh₃)₂Cl₂(L^4,5)] (M = Re, 8, 9; M = Tc, 10, 11) were obtained. In these compounds, the central metal ions adopt an octahedral coordination geometry as authenticated by single crystal X-ray diffraction analysis of 8 and 11. Rhenium and technetium complexes 1, 4 and rhenium chelate compounds 8, 9 have been also synthesized by reduction of [MO₄]⁻ with PPh₃ and HCl in the presence of the appropriate ligand. All the complexes were characterized by elemental analyses, FTIR and NMR spectroscopy.     

Palladium(II) and platinum(II) complexes with polypyridylbenzene ligands

The ligands 1,3-bis(3-pyridyl)benzene (1), 1,3-bis(4-pyridyl)benzene (2) and 1,3,5-tris(4-pyridyl)benzene (3) have been prepared by Stille coupling of 3- or 4-trimethylstannylpyridine with the appropriate bromoarene. Ligands 1 and 2 react with [M(OTf)₂(dppp)] (M=Pd, Pt) to produce the dipalladium- or diplatinum-containing macrocycles [M₂(μ-1)₂(dppp)₂](OTf)₄ or [M₂(μ-2)₂(dppp)₂](OTf)₄. These have been characterized by NMR spectroscopy and mass spectrometry and, in the case of [Pd₂(μ-1)₂(dppp)₂](OTf)₄, by X-ray crystallography. The molecular structure of the [Pd₂(μ-1)₂(dppp)₂]⁴⁺ cation reveals a shallow arrangement of the aromatic rings, with the palladium atoms lying above and below. The tridentate ligand 3 reacts with [Pd(OTf)₂(dppp)] to produce a trimetallic species of the form [Pd₃(μ₃-3)₂(dppp)₃](OTf)₆.     

Structural variations and spectroscopic properties of copper(I) complexes with bis(schiff base) ligands

Six copper(I) complexes {[Cu₂(L1)(PPh₃)₂I₂] · 2CH₂Cl₂}_n (1), {[Cu₂(L2)(PPh₃)₂]BF₄}_n (2), [Cu₂(L3)(PPh₃)₄I₂] · 2CH₂Cl₂ (3), [Cu₂(L4)(PPh₃)₄I₂] (4), [Cu₂(L5)(PPh₃)₂I₂] (5) and [Cu₂(L6)(PPh₃)₂I₂] (6) have been prepared by reactions of bis(schiff base) ligands: pyridine-4-carbaldehyde azine (L1), 1,2-bis(4′-pyridylmethyleneamino)ethane (L2), pyridine-3-carbaldehyde azine (L3), 1,2-bis(3′-pyridylmethyleneamino)ethane (L4), pyridine-2-carbaldehyde azine (L5), 1,2-bis(2′-pyridylmethyleneamino)ethane (L6) with PPh₃ and copper(I) salt, respectively. Ligand L1 or L2 links (PPh₃)₂Cu₂(μ-I)₂ units to form an infinite coordination polymer chain. Ligand 3 or 4 acts as a monodentate ligand to coordinate two copper(I) atoms yielding a dimer. Ligand 5 or 6 chelates two copper(I) atoms using pyridyl nitrogen and imine nitrogen to form a dimer. Complexes 1-4 exhibit photoluminescence in the solid state at room temperature. The emission has been attributed to be intraligand π-π* transition mixed with MLCT characters.     

First example of thiostannates with lanthanide-containing counter cations: Solvothermal synthesis, crystal structures and properties of thiostannates with neodymium(III) and gadolinium(III) complexes of bidentate and tridentate amino ligands

Three new lanthanide thiostannates [Ln₂(en)₆(μ₂-OH)₂]Sn₂S₆ (Ln = Nd (1), Gd (2); en = ethylenediamine) and [Gd(dien)₃]₂[(Sn₂S₆)Cl₂] (3) (dien = diethylenetriamine) were first synthesized by treating LnCl₃ with SnCl₄ and S under mild solvothermal conditions. Compounds 1 and 2 are isostructural. They consist of a binuclear lanthanide(III) complex [Ln₂(en)₆(μ₂-OH)₂]⁴⁺ cation and a dimeric [Sn₂S₆]⁴⁻ anion. The anion is built up by two SnS₄ tetrahedra sharing a common edge. The Nd³⁺ and Gd³⁺ ions are in an eight-coordinated environment forming distorted bicapped trigonal prisms. Compound 3 is composed of two monouclear [Gd(dien)₃]³⁺ complex cations, a [Sn₂S₆]⁴⁻ anion, and two chlorine ions. The Gd³⁺ ion has a nine-coordinated environment forming a distorted tricapped trigonal prism. In compounds 1-3, extensive hydrogen bonds are formed leading to three-dimensional networks of anions and cations. The band gaps of 2.42 eV for 1 and 3.17 eV for 2 have been derived from optical absorption spectra. The new lanthanide compounds might be the precursors for ternary lanthanide thiostannates by the heat treatment under nitrogen atmosphere to get rid of organic components.     

Synthesis and characterisation of a series of 1,2-phenylenedioxoborylcyclopentadienyl-metal complexes [Ti(IV), Zr(IV), Hf(IV), La(III), Ce(III), Yb(III), Sn(II) and Fe(II)]

The preparation of a series of 1,2-phenylenedioxoborylcyclopentadienyl-metal complexes is described. These are of formula [M{η⁵-C₅H₄(BX)}Cl₃] [M = Ti and X = CAT (2a), CAT^t (2b) or CAT^tt (2c); X = CAT^tt and M = Zr (4a) or Hf (4b)], [M{η⁵-C₅H₄(BX)}₂Cl₂] [M = Zr, X = CAT (3a) or CAT^t (3c); or M = Hf, X = CAT (3b) or CAT^t (3d)], [M{(μ-η⁵-C₅H₃BCAT)₂ SiMe₂}Cl₂] [M = Zr (5a) or Hf (5b)], [M{η⁵-C₅H₃(BCAT)₂}Cl₃] [M = Zr (6a) or Hf (6b)], [M{η⁵-C₅H₄BCAT}₃(THF)] [M = La (7a), Ce (7b) or Yb (7c)], [Sn{η⁵-C₅ H₄(BCAT^t)}Cl](8) and [Fe{η⁵-C₅H₄(BCAT^t)}₂] (9). The abbreviations refer to BO₂C₆H₄-1,2 (BCAT) and the 4-Bu^t (BCAT^t) and the (BCAT^tt) analogues. The compounds 2a-9 have been characterised by microanalysis, multinuclear NMR and mass spectra. The single crystal X-ray structure of the lanthanum compound 7a is presented.     

New Fe starting materials: preparation, characterisation and structural features of iron halide complexes with alcohol ligands

The new mononuclear [FeCl₂(HOPrⁱ)₄] (1), polymeric [{Cl₃Fe(μ-Cl)Fe(HOPrⁱ)₄}_n] (2) and binuclear [I₂Fe(μ-I)₂Fe(PrⁱOH)₄] (3) iron(II) complexes have been synthesized in high yields in propan-2-ol or toluene/propan-2-ol mixtures at room temperature. Magnetic moment measurements, ⁵⁷Fe Mössbauer spectroscopy data and the results of semi-empirical quantum mechanical calculations confirmed the high-spin configuration of the iron(II) centres, which were shown to be four- and/or six-coordinate by single crystal X-ray diffraction analyses. Intermolecular hydrogen bonding was observed in the solid state structure of 1, intramolecular interactions in 2, while both intra- and intermolecular association was seen in 3. Long iron-(μ-halide) bonds suggest the possibility of complex dissociation in solution and facile ligand substitution in 2 and 3.     

Oxidative addition of methyl iodide to [Rh(CO)2I]2: synthesis, structure and reactivity of neutral rhodium acetyl complexes, [Rh(CO)(NCR)(COMe)I2]2

Reaction of [Rh(CO)₂I]₂ (1) with MeI in nitrile solvents gives the neutral acetyl complexes, [Rh(CO)(NCR)(COMe)I₂]₂ (R=Me, 3a; ^tBu, 3b; vinyl, 3c; allyl, 3d). Dimeric, iodide-bridged structures have been confirmed by X-ray crystallography for 3a and 3b. The complexes are centrosymmetric with approximate octahedral geometry about each Rh centre. The iodide bridges are asymmetric, with Rh-(μ-I) trans to acetyl longer than Rh-(μ-I) trans to terminal iodide. In coordinating solvents, 3a forms mononuclear complexes, [Rh(CO)(sol)₂(COMe)I₂] (sol=MeCN, MeOH). Complex 3a reacts with pyridine to give [Rh(CO)(py)(COMe)I₂]₂ and [Rh(CO)(py)₂(COMe)I₂] and with chelating diphosphines to give [Rh(Ph₂P(CH₂)_nPPh₂)(COMe)I₂] (n=2, 3, 4). Addition of MeI to [Ir(CO)₂(NCMe)I] is two orders of magnitude slower than to [Ir(CO)₂I₂]⁻. A mechanism for the reaction of 1 with MeI in MeCN is proposed, involving initial bridge cleavage by solvent to give [Rh(CO)₂(NCMe)I] and participation of the anion [Rh(CO)₂I₂]⁻ as a reactive intermediate. The possible role of neutral Rh(III) species in the mechanism of Rh-catalysed methanol carbonylation is discussed.     

The influence of substituents (R) at N atom of thiophene-2-carbaldehyde thiosemicarbazones {(C4H3S)HCN-N(H)-C(S)NHR} on bonding, nuclearity and H-bonded networks of copper(I) complexes

The nuclearity, bonding and H-bonded networks of copper(I) halide complexes with thiophene-2-carbaldehyde thiosemicarbazones {(C₄H₃S)HC²N³-N(H)-C¹(S)N¹HR} are influenced by R substituents at N¹ atom. Thiophene-2-carbaldehyde-N¹-methyl thiosemicarbazone (HttscMe) or thiophene-2-carbaldehyde-N¹-ethyl thiosemicarbazone (HttscEt) have yielded halogen-bridged dinuclear complexes, [Cu₂(μ-X)₂(η¹-S-Htsc)₂(Ph₃P)₂] (Htsc, X: HttscMe, I, 1; Br, 2; Cl, 3; HttscEt, I, 4; Br, 5; Cl, 6), while thiophene-2-carbaldehyde-N¹-phenyl thiosemicarbazone (HttscPh) has yielded mononuclear complexes, [CuX(η¹-S-HttscPh)₂] (X, I, 7a; Br 8; Cl, 9) and a sulfur bridged dinuclear complex, [Cu₂(μ-S-HttscPh)₂(η¹-S-HttscPh)₂I₂] 7b co-existing with 7a in the same unit cell. These results are in contrast to S-bridged dimers [Cu₂(μ-S-Httsc)₂(η¹-Br)₂(Ph₃P)₂] · 2H₂O and [Cu₂(μ-S-Httsc)₂(η¹-Cl)₂(Ph₃P)₂] · 2CH₃CN obtained for R = H and X = Cl, Br (Httsc = thiophene-2-carbaldehyde thiosemicarbazone) as reported earlier. The intermolecular CH_Ph?π interaction in 1-3 (2.797 Å, 1; 3.264 Å, 2; 3.257 Å, 3) have formed linear polymers, whereas the CH_Ph?X and N³?HCH interactions in 4-6 (2.791, 2.69 Å, 5; 2.776, 2.745 Å, 6, respectively) have led to the formation of H-bonded 2D polymer. The PhN¹H?π, interactions (2.547 Å, 8, 2.599 Å, 9) have formed H-bonded dimers only. The Cu?Cu separations are 3.221-3.404 Å (1-6).     

Synthesis and structural characterization of dinuclear complexes of trivalent aluminum, gallium, indium and chromium derived from pyrazole-2-ethanol

The reaction of 1-(2-hydroxyethyl)-3,5-dimethylpyrazole (HL) with anhydrous metal(III) halides (M = Al, Ga, In and Cr) results in the isolation of four novel dinuclear complexes [Al(μ-L)Cl₂]₂ (1), [Ga(μ-L)Cl₂]₂ (2), [In(μ-L)Br₂(H₂O)]₂·2thf (3) and [Cr(μ-L)Cl₂(H₂O)]₂·1.5thf (4) in good yields. The new complexes have been characterized with the aid of analytical and spectroscopic studies. A single crystal X-ray structure determination in each case confirms the dimeric structure for all the complexes in the solid-state. The pyrazole ethanol ligand binds to the metal through both pyrazole nitrogen and bridging alkoxide oxygen terminals with the formation of a central M₂O₂ core involving the ethoxide anion. The metal(III) center is pentacoordinated in compounds 1 and 2, while it is hexacoordinated in compounds 3 and 4.     

Synthesis and structural analysis of calix[4]arene-supported iron(III) complexes

The paper describes the reactivity of calix[4]arene dialkyl- or -silylethers H₂R₂calix, R=Me (1), Bz (2), or SiMe₃ (3) (p-tert.butyl-calix[4]arene=H₄calix), towards the iron(III) complex [FeCl(NSiMe₃)₂(thf)] 4. Bis(silylation) of H₄calix was achieved using a mixture of NEt₃ and Me₃SiCl as silylating agent, which is probably the most convenient and cheapest way for the preparation of H₂(Me₃Si)₂calix 3. [FeCl(N{SiMe₃}₂)₂(thf)] 4 has been obtained from the reaction of [FeCl₃] and commercially available K[N(SiMe₃)₂] in THF. The reactions of 4 with H₂Me₂calix and H₂Bz₂calix afford mononuclear iron(III) chloro compounds [FeCl(R₂calix)] 5 (R=Me) and 6 (R=Bz). The usage of calix[4]arene silyl ether 3 leads to a dinuclear complex [Fe₂({Me₃Si}calix)₂] 7, presumably under Me₃SiCl cleavage of a mononuclear calixarene iron(III) chloro complex. The calix[4]arene ether stabilized iron(III) chloro complexes are susceptible to nucleophilic substitution reactions, as exemplified by the reaction of 5 with sodium azide yielding an azido complex [Fe(N₃)(Me₂calix)] 8. The molecular structures of 4, 5, 6, 7, and 8 in the solid state have been determined by X-ray diffraction.     

Linear and bent oxo-bridged dinuclear rhenium(V) complexes with terminal and bridging pyrazole ligands

The [ReOX₃(AsPh₃)(OAsPh₃)] (X = Cl or Br) complexes react with two equivalents of 3,5-dimetylopyrazole (3,5-Me₂pzH) in acetone at room temperature to give [{Re(O)X₂(3,5- Me₂pzH)₂}₂(μ-O)] (1 and 2). In the case of [ReOBr₃(AsPh₃)(OAsPh₃)], a small quantity of the dinuclear rhenium complex [{Re(O)Br(3,5-Me₂pzH)}₂(μ-O)(μ-3,5-Me₂pz)₂] (3) has been isolated next to the main product 2. Treatment of [ReOX₃(PPh₃)₂] compounds with two equivalents of 3,5-Me₂pzH in acetone at room temperature leads to the isolation of symmetrically substituted dinuclear rhenium complexes [{Re(O)X(PPh₃)}₂(μ-O)(μ-3,5-Me₂pz)₂] (4 and 5). Refluxing of [ReO(OEt)X₂(PPh₃)₂] complexes with 3,5-Me₂pzH in ethanol affords unsymmetrically substituted dinuclear rhenium [{Re(O)X(PPh₃)}(μ-O)(μ-3,5-Me₂pz)₂{Re(O)X(3,5- Me₂pzH)}] complexes (6 and 7). The complexes obtained in these reactions have been characterised by IR, UV-Vis, ¹H and ³¹P NMR. The crystal and molecular structures have been determined for 1, 2, 3, 4, 6 and 7 complexes.     

Syntheses and molecular structures of Co-Na and Co-K coordination polymers constructed using mono- and bis-chelated cobalt(III) complexes of bis(2-pyridylcarbonyl)amide ion

Four new hetero-bimetallic Co³⁺-Na⁺ and Co³⁺-K⁺ coordination polymers having the molecular formulae [Na(H₂O)Co(L)(N₃)₃]_n (1), [Na₂Co(L)(N₃)₃(H₂O)₅][Co(L)(N₃)₃] (2), K[Co(L)(NCS)₃]·H₂O (3) and K[Co(L)₂][Co(NCS)₄]·0.5H₂O (4), were synthesized. Compounds 1-4 were characterized by single crystal X-ray diffraction, IR, UV-Vis, and thermogravimetric methods. These bimetallic systems have EE, EO azide bridge (1, 2) as well as bent (1, 2, 3) and linear (1, 4) aquo bridges. Important features observed among them were: a Z-shaped and diamond-shaped Co₂Na₂ clusters in 1, a centrosymmetric double ladder like polymer based on Na₄ cluster in 2, and a linear KOK core having paddle-wheel structure in 4.