Synthesis and characterization of tetrairon-tungsten cluster complex containing a μ4, η-carbonyl ligand

Reaction of [(PPh₂C₅H₄)Cp₃Fe₄(CO)₄] (1) with (CO)₄W(CH₃CN)₂ at ambient temperature affords [(CO)₄W(PPh₂C₅H₄)Cp₃Fe₄(CO)₄] (2) as the major product, together with a small amount of [(CO)₅W(PPh₂C₅H₄)Cp₃Fe₄(CO)₄] (3). Compound 3 can be obtained in good yield by treating (CO)₅W(CH₃CN) with equal molar of 1, and reaction of 3 with Me₃NO in acetonitrile solvent produces 2 exclusively. The crystal structures of 2 and 3 have been determined by an X-ray diffraction study. Compound 2 contains an interesting μ₄, η²-CO ligand, where two electrons donated by the carbon atom are involved to bridge a Fe₃ face and two electrons from oxygen are donated to the tungsten(0) atom.     

Voltammetry of half-sandwich manganese group complexes of η-PhC3B7H9 and η-C60Bn2PhH2, two ligands that are cyclopentadienyl mimicks

The potentials of a series of one-electron oxidation and reduction reactions have been determined for manganese group half-sandwich complexes of the tricarbadecaboranyl ligand PhC₃B₇H₉ and the penta-organo fullerene ligand C₆₀Bn₂PhH₂ (Bn = benzyl). The anodic processes were studied in CH₂Cl₂ and the cathodic processes were studied in both CH₂Cl₂ and THF, the supporting electrolyte being [NBu₄][B(C₆F₅)₄]. The manganese complex Mn(CO)₂(PMe₃)(PhC₃B₇H₉) (1) is a member of a three-electron transfer series which includes oxidation to 1⁺ (0.51 V versus ferrocene) and successive reductions to 1⁻ (−1.66 V) and 1²⁻ (−1.77 V). Both the oxidation and reduction of the closely-related complex Mn(CO)₂(PPh₃)(PhC₃B₇H₉) (2) are chemically irreversible under slow-scan cyclic voltammetry conditions. The rhenium complex Re(CO)₂(PPh₃)(PhC₃B₇H₉) (3) oxidizes (E_1/2 = 0.82 V versus ferrocene) to a radical cation which, unlike its cyclopentadienyl analogue, shows no evidence of dimerization. Oxidation of the fullerene-based complex Re(CO)₃(C₆₀Bn₂PhH₂) is more facile than that of its cyclopentadienyl analogue, in contrast to previous findings in this class of metal-fullerene derivatives. An electrochemical ligand factor, E_L, of 0.63 is calculated for the PhC₃B₇H₉ ligand in manganese group half-sandwich complexes.     

Ethanol catalyzed synthesis of titanocene aryl carboxylate complexes and crystal structure of (η-C5H5)2Ti(2-OH-5-S-O2CC6H3)2

A method for the synthesis of titanocene (IV) aryl carboxylate complexes is presented in this paper. It is based on the fact that alcohol can catalyze the reaction between Cp₂TiCl₂ and aryl carboxylate ligands in the presence of sodium hydroxide (NaOH). The effects of the catalyst on the reaction system were studied and the possible reaction mechanism was proposed. This method was used to prepare a series of titanocene (IV) aryl carboxylate complexes and a macrocyclic titanocene (5,5′-dithiodisalicylato titanocene), whose structure was determined by X-ray diffraction analysis.     

Influence of CH3 group of μ-N-C-S ligand on the properties of [Fe2(C4H5N2S)2(NO)4] complex

Bi-nuclear neutral sulfur-nitrosyl iron complex [Fe₂(SR)₂(NO)₄] (I) has been obtained by replacement of thiosulfate ligands in dianion [Fe₂(S₂O₃)₂(NO)₄]²⁻ by 1-methyl-imidazole-2-yl. From X-ray analysis data, the complex has centrosymmetrical dimeric structure, with the iron atoms being linked via μ-N-C-S bridge. From Mossbauer spectroscopy, isomeric shift δ_Fe is 0.180(1) mm/s and quadrupole splitting ΔE_Q is 0.928(2) mm/s at T = 290 K. By comparative studying the mass-spectra in the gaseous phase of solid samples decomposition and kinetics of NO release in 1% aqueous solutions of dimethylsulfoxide, using of the ligand with CH₃ substituent in position 1 of imidazole-2-thiol was shown to yield a more stable donor of nitrogen monoxide than earlier obtained analog with imidazole-2-thiol, [Fe₂(C₃H₃N₂S)₂(NO)₄].     

Hydrido-derivatives of [Ir4(CO)10(diphosphine)]: X-ray analyses of [Ir4H(CO)9(μ-Ph2PH(CH3)PPh2)] and [Ir4 H(CO)9(μ-Ph2P(CH2)nPPh2)] (n = 2, 3)

Some novel hydrido-anions of general formula [Ir₄H(CO)₉(μ-L-L)]⁻ (L-L = Ph₂PCH(CH₃)PPh₂, Ph₂P(CH₂)₂PPh₂, Ph₂P(CH₂)₃PPh₂ and Ph₂AsCH₂AsPh₂) have been obtained by the reaction of [Ir₄(CO)₁₀(μ-L-L)] with the base 1,8-diazabicyclo[5.4.0]undec-7-ene in wet dichloromethane. According to IR and ¹H, ³¹P and ¹³C NMR data at low temperature, these anionic derivatives display a single conformation in solution: three edge-bridging COs around the triangular basal face and both the hydride and the bidentate ligands located in axial positions relative to this face. The structures of four compounds were established by X-ray diffraction studies, which confirmed the configuration proposed on the basis of spectroscopic data.     

New examples of μ-η:η-disulfido dicopper(II,II) complexes with bis(tetramethylguanidine) ligands

The new ligand N,N′-(2-methyl-2-(2-pyridyl)propan-1,3-diyl)bis(tetramethylguanidine) (L) and its four-coordinate, distorted square-planar copper(II) complex [CuLCl₂] (1) were synthesized and structurally characterized. Similarly, bis(μ-OH)dicopper(II,II) complex [Cu₂L₂(OH)₂](OTf)₂ (2) was synthesized and structurally characterized. The pyridyl group in L does not coordinate in either 1 or 2. New examples of μ-η²:η²-disulfido dicopper(II,II) complexes were synthesized by treating a copper(I) complex of either L or L′ [L′ = 2′,2′-(propane-1,3-diyl)bis(1,1,3,3-tetramethylguanidine)] with elemental sulfur. [Cu₂L₂(S₂)](PF₆)₂ (3) and [Cu₂(S₂)](PF₆)₂ (4) were both structurally characterized, and both structures have two copper(II) ions bridged by a disulfido ligand in a μ-η²:η²-manner. The ligands L and L′ coordinate in a bidentate fashion (like 1 and 2, the pyridyl ring does not coordinate in 3), and the geometry around the copper ions in 3 and 4 is distorted square planar. The metrical parameters of 3 and 4 were found to be similar to other μ-η²:η²-disulfido dicopper(II,II) complexes, and the Cu-S and Cu···Cu distances are among the shortest reported for this class of copper disulfide dimers.     

Crystallographic and theoretical studies of (η-C5Me5)Ru(2,4-dimethyl-η-pentadienyl) and [(η-C5Me5)Rh(2,4-dimethyl-η-pentadienyl)][BF4]

The determination of the solid state structure of Cp*Ru(2,4-dimethyl-η⁵-pentadienyl) (1), where Cp* = pentamethylcyclopentadienyl, fills the gap in the series of previously established structures of closely related compounds. Compound 1 does not exhibit the ideal C_S symmetry and its conformation is intermediate between the C_S-synperiplanar eclipsed and C_S-antiperiplanar arrangements of the ligands. Density functional theory studies indicate that the C_S-synperiplanar eclipsed, C_S-antiperiplanar, and intermediate conformations of 1 and Cp*Rh(2,4-dimethyl-η⁵-pentadienyl)⁺ (2) do not differ by more than a few tenths of 1 kcal/mol. The geometrical features of cation 2 are similar to those of 1, and in both complexes the pentadienyl ligands are not planar. The metal-carbon distances to the Cp* ligands in 1 and 2 are comparable, while the metal-carbon distances to the pentadienyl moiety are somewhat shorter in the Ru complex. A study of the conformational flexibility of the Cp* ligand in 5610 organometallic complexes showed that it usually shields the central metal by 36.2(10)%, provided the metal-centroid(Cp*) distances are normalized to 2.28 Å. The corresponding values in 1 and 2 are 37.2% and 37.4%, respectively.     

Spontaneous resolution of a bis(η-methylcyclopentadienyl)zinc complex

Two crystalline complexes of bis(η¹-methylcyclopentadienyl)zinc, [Zn(C₅H₄Me)₂(py)₂] (1), where py is pyridine, and [Zn(C₅H₄Me)₂(teeda)], 2, where teeda is N,N,N′,N′-tetraethylethylenediamine have been isolated. The crystal structures of 1 and 2 are the first crystal structures for Zn(C₅H₄Me)₂ complexes reported in the literature; both structures display η¹-coordination of the methylcyclopentadienyl ring to zinc, and both compounds display chirogenic α-carbon atoms. While 1 forms racemic crystals, 2 undergoes spontaneous resolution and crystals of 2 are thus enantiomerically pure. ¹H NMR showed that Zn(C₅H₄Me)₂ is stereochemically labile in solution with only one signal for the Cp-protons. This fact opens up the possibility for total spontaneous resolution and absolute asymmetric synthesis.     

Thallium(III) complexes of the metalloligands [Pt2(μ-S)2(PPh3)4] and [Pt2(μ-Se)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the diarylthallium(III) bromides Ar₂TlBr [Ar = Ph and p-ClC₆H₄] in methanol gave good yields of the thallium(III) adducts [Pt₂(μ-S)₂(PPh₃)₄TlAr₂]⁺, isolated as their salts. The corresponding selenide complex [Pt₂(μ-Se)₂(PPh₃)₄TlPh₂]BPh₄ was similarly synthesised from [Pt₂(μ-Se)₂(PPh₃)₄], Ph₂TlBr and NaBPh₄. The reaction of [Pt₂(μ-S)₂(PPh₃)₄] with PhTlBr₂ gave [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]⁺, while reaction with TlBr₃ gave the dibromothallium(III) adduct [Pt₂(μ-S)₂(PPh₃)₄TlBr₂]⁺[TlBr₄]⁻. The latter complex is a rare example of a thallium(III) dihalide complex stabilised solely by sulfur donor ligands. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄TlPh₂]BPh₄, [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]BPh₄ and [Pt₂(μ-S)₂(PPh₃)₄TlBr₂][TlBr₄] reveal a greater interaction between the thallium(III) centre and the two sulfide ligands on stepwise replacement of Ph by Br, as indicated by shorter Tl-S and Pt?Tl distances, and an increasing S-Tl-S bond angle. Investigations of the ESI MS fragmentation behaviour of the thallium(III) complexes are reported.     

The arylation of [Pt2(μ-S)2(PPh3)4]

Routes to the synthesis of the mixed sulfide-phenylthiolate complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ have been explored; reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess Ph₂IBr proceeds readily to selectively produce this complex, which was structurally characterised as its PF₆⁻ salt. Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with other potent arylating reagents (1-chloro-2,4-dinitrobenzene and 1,5-difluoro-2,4-dinitrobenzene) also produce the corresponding nitroaryl-thiolate complexes [Pt₂(μ-S){μ-SC₆H₂(NO₂)₂X}(PPh₃)₄]⁺ (X = H, F). The complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ reacts with Me₂SO₄ to produce the mixed alkyl/aryl bis-thiolate complex [Pt₂(μ-SMe)(μ-SPh)(PPh₃)₄]²⁺, but corresponding reactions with the nitroaryl-thiolate complexes are plagued by elimination of the nitroaryl group and formation of [Pt₂(μ-SMe)₂(PPh₃)₄]²⁺. [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ also reacts with Ph₃PAuCl to give [Pt₂(μ-SAuPPh₃)(μ-SPh)(PPh₃)₄]²⁺.     

Ru2(CO)4(OOCR)2(PPh3)2 sawhorse-type complexes containing μ2-η-carboxylato ligands derived from biologically active acids

The thermal reaction of Ru₃(CO)₁₂ with the biologically active acids acetyl salicylic acid (Aspirin), α-methyl-4-(isobutyl)phenylacetic acid (Ibuprofen) and 3α,7α,12α-trihydroxy-5β-cholanic acid (cholic acid) in refluxing tetrahydrofuran, followed by addition of triphenylphosphine, gives the dinuclear complexes Ru₂(CO)₄(OOCR)₂(PPh₃)₂ (1: R = C₆H₄-2-OCOMe, 2: R = CHMe-C₆H₄-4-Buⁱ, 3: C₂₃H₃₉O₃). The single-crystal structural analysis of 1 and 2 reveals a dinuclear Ru₂(CO)₄ sawhorse structure, the diruthenium backbone being bridged by the carboxylato ligands, while the two phosphine ligands occupy the axial positions at the ruthenium atoms. However, chiral carbon atoms in the carboxylic acid undergo racemisation during the thermal reaction.     

Reaction of cyanamide and their derivatives with (η-C5H5)Mn(CO)3 and (η-C5H4CH3)Mn(CO)3

The reaction of cyanamide and its derivatives with the (η⁵-C₅H₅)Mn(CO)₂(THF) and (η⁵-C₅H₄CH₃)Mn(CO)₂(THF) complexes affords the cyanamide substituted complexes of types (η⁵-C₅H₅)Mn(CO)₂(NCN(R′)(R″)) (2a-d) and (η⁵-C₅H₄CH₃)Mn(CO)₂(NCN(R′)(R″)) (3a-e). All complexes were characterized by spectroscopy (¹H, ¹³C NMR, IR), elemental and mass spectroscopy analysis. Complex 2b (η⁵-C₅H₅)Mn(CO)₂(NCN(CH₃)₂) was additionally examined by single crystal X-ray structure determination.     

A novel tetranuclear hydrogenphosphate-bridged Cu(II) cluster. Synthesis, structure, spectroscopy and magnetism of [Cu4(dpyam)4(μ4,η-HPO4)2(μ-X)2]X2(H2O)6 (X = Cl, Br)

Two novel tetranuclear compounds with an unprecedented mode of a hydrogenphosphato bridge, [Cu₄(dpyam)₄(μ₄,η³-HPO₄)₂(μ-X)₂]²⁺ (in which dpyam = di-2-pyridylamine and X = Cl (1), Br (2)) have been synthesised and characterised structurally and magnetically. The Cu(II) ions in the structures each display a square-pyramidal geometry, with two tridentate hydrogenphosphato groups bridging four copper atoms in a μ₄,η³ coordination mode which is rarely found in hydrogenphosphate metal compounds. Each (different) pair of Cu(II) ions is additionally bridged by halide ions, with relatively long Cu-X distances (2.551(3)-2.604(3) Å for 1 and 2.707(1)-2.766(2) Å for 2) and subsequently also a small Cu-X-Cu angle (65.7(1)° and 65.1(1)° for 1 and 61.6(1)° and 62.4(1) for 2) and a large Cu-X-Cu angle (95.5(1)° and 96.5(1)° for 1 and 91.1(1)° and 92.6(1)° for 2). Cu?Cu distances in the tetranuclear units varies from 2.802(3) to 5.232(3) Å for 1 and from 2.834(1) to5.233(1) Å in 2. The lattice structures are stabilised by extensive intermolecular hydrogen bonds. The magnetic susceptibility measurements down to 5 K revealed a weak ferromagnetic interaction between the outer pairs of Cu(II) ions which vary from 22 to 46 cm⁻¹ in 1 and 12 to 33 cm⁻¹ in 2 and a moderately strong antiferromagnetic interaction between the inner Cu(II) ions of −79 cm⁻¹ in 1 and −83 cm⁻¹ in 2, via the Cu-O-P-O-Cu pathway.     

1,3-Bis(α-aminoisopropyl)benzene, meta-C6H4(CMe2NH2)2: An N,N-bridging and N,C,N-cyclometalating ligand

Saponification of the bis(carbamic acid ester) 1,3-C₆H₄(CMe₂NHCO₂Me)₂ (1), made by the addition of methanol to commercial 1,3-C₆H₄(CMe₂NCO)₂, yielded the meta-phenylene-based bis(tertiary carbinamine) 1,3-C₆H₄(CMe₂NH₂)₂ (2). Dinuclear [{(η⁴-1,5-C₈H₁₂)RhCl}₂{μ-1,3-C₆H₄(CMe₂NH₂)₂}] (3) resulted from the action of 2 on [{(η⁴-1,5-C₈H₁₂)Rh(μ-Cl)}₂] in toluene. Combination of 2 with PdCl₂ or K₂[PdCl₄] gave the dipalladium macrocycle trans,trans-[{μ-1,3-C₆H₄(CMe₂NH₂)₂}₂(PdCl₂)₂] (4) along with cyclometalated [{2,6-C₆H₃(CMe₂NH₂)₂-κN,κC¹,κN′}PdCl] (5). Substitution of PEt₃ for the labile chlorido ligand of 5 afforded [{2,6-C₆H₃(CMe₂NH₂)₂-κN,κC¹, κN′}Pd(PEt₃)]Cl (6). The crystal structures of the following compounds were determined: bis(carbamic acid ester) 1, ligand 2 as its bis(trifluoroacetate) salt [1,3-C₆H₄(CMe₂NH₃)₂](O₂CCF₃)₂, 2 · (HAc_f)₂, complexes 3 and 6, as well as 1,3-C₆H₄(CMe₂OH)₂ (the diol analogue of 2).     

A versatile entry into aqueous niobium chemistry: isolation and structure of the intermediate Nb4(μ2-O)2(μ2-OC2H5)4Cl4(OC2H5)4(HOC2H5)4

The reduction of ethanolic solutions of niobium pentachloride with zinc, followed by treatment with aqueous acids serves as a versatile entry into the aqueous solution chemistry of niobium. From the zinc-reduced solution, the major intermediate, Nb₄(μ₂-O)₂(μ₂-OC₂H₅)₄Cl₄(OC₂H₅)₄(HOC₂H₅)₄, was isolated and the crystal structure determined by X-ray crystallography. The complex crystallizes in the orthorhombic space group Pccn, with Z=4, a=21.0105(9), b=11.0387(5), c=19.1389(8), V=4438.9(3) ų, M_r=1090.19,R₁=0.0327 and wR₂=0.0876. The structure revealed a centrosymmetric tetrameric Nb(IV) complex, consisting of a pair of edge-sharing bi-octahedral Nb₂(μ₂-OC₂H₅)₄Cl₂(OC₂H₅)₂(HOC₂H₅)₂ units that are joined by two axial oxo ligands. The Nb-Nb distance of 2.7458(3) Å is consistent with a single metal-metal bond.     

Oxidation of [Ir(η-C5Me5)(C8H4S8)] and crystal structures of [IrI(η-C5Me5)(C8H4S8)](I3) and [IrI(η-C5Me5)(C8H4S8)](I3)1/2(I7)1/2

[Ir(η⁵-C₅Me₅)(C₈H₄S₈)] (1) [ = 2-{(4,5-ethylenedithio)-1,3-dithiole-2-ylidene}-1,3-dithiole-4,5-dithionate(2−)] was reacted with iodine in dichloromethane to afford one-electron- and two-electron-oxidized species [IrI(η⁵-C₅Me₅)(C₈H₄S₈)] (2), [IrI(η⁵-C₅Me₅)(C₈H₄S₈)](I₃) (3) and [IrI(η⁵-C₅Me₅)(C₈H₄S₈)](I₅) (4). The oxidized species exhibit electrical conductivities of (1.1-5.0) × 10⁻⁶ S cm⁻¹ measured for compacted pellets at room temperature. The X-ray crystal structures of the two-electron-oxidized complexes 3 and 4 revealed the Ir-I bonds for both of them and the presence of for 3 and ions for 4 as the counter anions. They have many S-S and S-I non-bonding contacts to form two-dimensional molecular interaction sheets in the solid state.     

Syntheses and crystal structures of mononuclear [2.2]paracyclophane complexes of rhodium and iridium supported by the pentamethylcyclopentadienyl ligand [M(η-pcp)(η-C5Me5)](BF4)2 (M=Rh and Ir)

Mononuclear [2.2]paracyclophane complexes of Rh and Ir, [M(η⁶-pcp)(η⁵-C₅Me₅)](BF₄)₂ (M=Rh (1) and Ir (2); pcp=[2.2]paracyclophane) were crystallized and their structures were first characterized crystallographically. On both pcp complexes the metal atom is bonded to the benzene ring on one side of the pcp ligand in the η⁶-coordination mode. The metal atom is also supported by the η⁵-C₅Me₅ ligand to afford a triple-decker sandwich structure. In Rh pcp complex 1 the average RhC(pcp) and RhC(C₅Me₅) distances are 2.284(2) and 2.161(2) Å, respectively. The average C(pcp)C(pcp) distance of 1.407(4) Å with the Rh atom is longer than that (1.388(4) Å) without a Rh atom. Similarly, the average IrC(pcp) and IrC(C₅Me₅) distances in Ir pcp complex 2 are 2.275(3) and 2.174(3) Å, respectively. The average C(pcp)C(pcp) distance of 1.410(4) Å with the Ir atom is longer than that (1.388(4) Å) without an Ir atom. It is interesting that the average interannular distances of 2.97 Å for 1 and 2 between two decks of the pcp ligand are shorter than that (3.09 Å) of the metal-free pcp ligand, indicative of the decrease of the repulsive π-interaction between benzene rings. The Rh pcp complex gave the well-resolved ¹H NMR signals of [Rh(η⁶-pcp)(η⁵-C₅Me₅)]²⁺, whereas the Ir pcp complex exhibited two kinds of ¹H NMR signals which were assigned as [Ir(η⁶-pcp)(η⁵-C₅Me₅)]²⁺ and [Ir₂(η⁶-pcp)(η⁵-C₅Me₅)₂]⁴⁺ in (CD₃)₂CO at 23 °C.     

Photochemical displacement of the benzene ligand in [(η-C6H6)Ru(CH3CN)2(L)] and [(η-C6H6)Ru(CH3CN)(L2)] (L=CH3CN, PPh3, L2=dppe, bipy)

Photoirradiation with a 150 W medium-pressure Hg lamp for 17 h in acetontrile as the solvent replaces the benzene ligand in the cationic complexes [(η⁶-C₆H₆)Ru(CH₃CN)₂(L)]²⁺ and [(η⁶-C₆H₆)Ru(CH₃CN)(L₂)]²⁺ (L=CH₃CN, PPh₃, L₂=dppe, bipy) with acetonitrile. These replacements are equally clean to those reported before for analogous CpRu⁺ complexes. Crystal structures of the products obtained are included.     

Anionic ruthenium(II) alkyls with ancillary diene and dienyl ligands: Synthesis and structures of [(η,η-C7H8)RuMe4] and [(η,η-C8H11)RuMe3]

Treatment of the ruthenium(II) diene complexes [(η²,η²-nbd)RuCl₂]_n or [(η²,η²-cod)RuCl₂]_n with 4 equiv. of methyllithium in the presence of N,N,N′,N′-tetramethylethylenediamine (tmed) yields the methyl complexes [Li(tmed)]₂[(η²,η²-nbd)RuMe₄] (1) and [Li(tmed)]₂[(η³,η²-C₈H₁₁)RuMe₃] (2), respectively, where nbd = norbornadiene and cod = 1,5-cyclooctadiene. In the latter compound, the cyclooctadiene ligand has been deprotonated to afford a η³,η²-1,2,3:5,6-cyclooctadienyl group. Both complexes were studied by ¹H and ¹³C{¹H} NMR spectroscopy, and the crystal structure of 2 was determined. One lithium atom in 2 is four-coordinate and bridges between one ruthenium-bound methyl group and one of the wingtip allylic carbon atoms in the η³,η²-C₈H₁₁ ligand. The other lithium atom is five-coordinate, and forms contacts with the other two Ru-Me groups and with the other wingtip carbon atom of the allyl unit.     

Hyponitrite complexes: Crystal and molecular structure of [Ru2(CO)4(μ-PBu2)(μ-Ph2PCH2PPh2)(μ-η-ONNOMe)]

The new trans-hyponitrite derivative complex [Ru₂(CO)₄(μ-P^tBu₂)(μ-dppm)(μ-η²-ONNOMe)] (2, dppm = Ph₂PCH₂PPh₂) was prepared by deprotonation of [Ru₂(CO)₄(μ-H)(μ-P^tBu₂)(μ-dppm)(μ-η²-ONNOMe)][BF₄] (1) with the base DBU (1.8-diazabicyclo[5.4.0]undec-7-ene). The latter complex salt has been obtained in an improved synthesis starting from the trans-hyponitrite complex [Ru₂(CO)₄(μ-H)(μ-P^tBu₂)(μ-dppm)(μ-η²-ONNO)]. Compound 2 has been characterized by spectroscopic methods as well as by X-ray diffraction and represents the first neutral complex bearing a deprotonated monoester of the hyponitrous acid as the bridging ligand.