Deposition of iron titanate/titania ceramic composite thin films from a single molecular precursor

A heterobimetallic single molecular precursor, [Fe₂Ti₄(μ-O)₆(TFA)₈(THF)₆] (1) [TFA = trifluoroacetate, THF = tetrahydrofuran], was synthesized by the simple reaction of [Fe₃O(OAc)₆(H₂O)₃]NO₃·4H₂O [OAc = acetato] with tetrakis(2-ethoxyethanalato)titanium(IV) in the presence of trifluoroacetic acid in THF. The synthesized precursor was analyzed by melting point, CHN analysis, FTIR, single crystal X-ray diffraction and thermogravimetric analysis. Complex (1) crystallizes in the orthorhombic space group Pca2₁ with cell dimensions a = 19.2114(14), b = 20.4804(15) and c = 17.2504(12) Å, and the complex undergoes thermal decomposition at 490 °C to give a residual mass corresponding to an Fe₂TiO₅-TiO₂ composite mixture. The synthesized precursor was utilized for deposition of Fe₂TiO₅-TiO₂ composite thin films by aerosol-assisted chemical vapor deposition (AACVD) on glass substrates at 500 °C using argon as the carrier gas. Scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and X-ray powder diffraction (XRD) analyses of the thin films suggest the formation of good quality crystalline thin films of an Fe₂TiO₅-TiO₂ composite with an average grain size of 0.105-0.120 μm.     

Magnesium hydrotris(1-pyrazolyl)borate as a promising single source MOCVD precursor of magnesium borate phases

The magnesium(II) hydrotris(1-pyrazolyl)borate, Mg[BH(pz)₃]₂, complex has been, for the first time, tested as a precursor for the metal organic chemical vapor deposition (MOCVD) of borate phase thin films. The thermal analyses of this source reveal high volatility and good thermal stability with a low residue left despite its relatively high melting point. In particular, the compound has been successfully applied to the MOCVD fabrication of Mg₂B₂O₅ films, and therefore it represents a suited and reliable single source precursor of borate phases. Mg[BH(pz)₃]₂ provides constant evaporation rates even for very long deposition times and, hence, highly homogeneous films of carefully controlled thickness.     

Two novel oxomolybdenum complexes derived from the reaction of chlorotrisulfidomolybdate precursor with a pyridine-containing tridentate ligand

Reaction of chlorotrisulfidomolybdate [PPh₄][MoClS₃] (1) with one equivalent of tridentate ligand PyCH₂NHC₂H₄SNa (PyNSNa) in THF generated both a mononuclear and a dinuclear complexes, [PPh₄][(PyNS)MoO(η²-S₂)₂] (2) and [PPh₄][(PyNS)Mo(O)(μ-S)₂Mo(S)(η²-S₂)]·0.5MeCN (3·0.5MeCN). These two complexes were separated mechanically and fully characterized using IR, UV/Vis spectra, ¹H NMR spectra and X-ray single crystal diffraction analysis. In both complexes, one terminal sulfido ligand was substituted by one oxo group. In complex 3, two types of intermolecular hydrogen bonding in its solid state led to a 1-D structure in which each unit was a dimmer formed via hydrogen bonding.     

Structures of cadmium-binding acidic phospholipase A2 from the venom of Agkistrodon halys Pallas at 1.9A resolution

Phospholipase A(2) coordinates Ca(2+) ion through three carbonyl oxygen atoms of residues 28, 30, and 32, two carboxyl oxygen atoms of residue Asp49, and two (or one) water molecules, forming seven (or six) coordinate geometry of Ca(2+) ligands. Two crystal structures of cadmium-binding acidic phospholipase A(2) from the venom of Agkistrodon halys Pallas (i.e., Agkistrodon blomhoffii brevicaudus) at different pH values (5.9 and 7.4) were determined to 1.9A resolution by the isomorphous difference Fourier method. The well-refined structures revealed that a Cd(2+) ion occupied the position expected for a Ca(2+) ion, and that the substitution of Cd(2+) for Ca(2+) resulted in detectable changes in the metal-binding region: one of the carboxyl oxygen atoms from residue Asp49 was farther from the metal ion while the other one was closer and there were no water molecules coordinating to the metal ion. Thus the Cd(2+)-binding region appears to have four coordinating oxygen ligands. The cadmium binding to the enzyme induced no other significant conformational change in the enzyme molecule elsewhere. The mechanism for divalent cadmium cation to support substrate binding but not catalysis is discussed.     

Synthesis of the flavour precursor, alliin, in garlic tissue cultures

The path of synthesis of alkyl cysteine sulphoxides, or flavour precursors, in the Alliums is still speculative. There are two proposed routes for alliin biosynthesis, one is from serine and allyl thiol while the other is from glutathione and an allyl source via gamma glutamyl peptides. The routes have been investigated by exposing undifferentiated callus cultures of garlic and onion to potential pathway intermediates. After a period of incubation of 2 days the callus was extracted, and analysed for flavour precursors and related compounds by HPLC. Standards of alliin, isoallin and propiin were synthesised and their identity confirmed by HPLC and NMR. Putative intermediates selected included the amino acids serine and cysteine, as well as more complex intermediates such as allylthiol, allyl cysteine and glutathione. Both garlic and onion tissue cultures were able to synthesize alliin following incubation with allylthiol, and cysteine conjugates such as allyl cysteine. The ability of the tissue cultures to form alliin from intermediates was compatible with the proposed routes of synthesis of alliin.     

Synthesis and characterization manganese oxide nanobundles from decomposition of manganese oxalate

The present investigation reports, the synthesis of manganese oxide (α-Mn₂O₃) nanobundles using thermal decomposition and its physicochemical characterization. The α-Mn₂O₃ nanobundles have been prepared using manganese oxalate dihydrate powders as precursor in the presence of oleylamine and triphenylphosphine as solvent and capping agent. Transmission electron microscopy (TEM) analysis demonstrated Mn₂O₃ nanobundles compose of nanospheres with diameter 30 nm. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR) spectroscopy. Manganese oxide nanocrystals have been prepared under different condition. The controlled experimental results showed that the use of oleylamine and triphenylphosphine as the solvent and capping agent in the chemical process played important role in the formation of the final products.     

Synthesis, crystal structure and optical properties of a new lead bismuth borate

A new phase of the compound PbBiBO₄ has been successfully synthesized via the standard solid-state reaction, and the crystal structure has been determined from X-ray monocrystal diffraction data. It crystallizes in orthorhombic space group Cmca (No. 64) with lattice constants a = 10.782(3) Å, b = 10.502(3) Å, c = 7.477(2) Å, Z = 8. The crystal structure is characterized by a three-dimensional structure consisting of BiO₆ octahedra, PbO₄ tetrahedra and BO₃ triangles. The BiO₆ octahedra compose the layers through the O(2) atoms and O(3) atoms along the [1 0 1] direction, which connects the BO₃ trigonal groups by sharing the O(3) and two O(1) atoms and links the PbO₄ tetrahedra through the O(2) atoms. The UV–Vis–NIR Diffuse-Reflectance spectrum shows that the ultraviolet cutoff edge for the PbBiBO₄ crystal is about 310 nm. Functional groups in the sample were identified by Infrared spectrum.     

Synthesis of 2α-substituted-14-epi-previtamin D3 and its genomic activity

We synthesized and isolated 2α-substituted analogs of 14-epi-previtamin D₃ after thermal isomerization at 80 °C for the first time. The VDR binding affinity and transactivation activity of osteocalcin promoter in HOS cells were evaluated, and the 2α-methyl-substituted analog was found to have greater genomic activity than 14-epi-previtamin D₃.     

Processing of protealysin precursor

Protealysin, a protease previously described by us in Serratia proteamaculans, belongs to the group of thermolysin-like proteases (TLPs) that differ from classical TLPs by the precursor structural organization. The propeptide of protealysin precursor has no significant structural similarity to the propeptides of most TLPs. The functions of protealysin-like precursors and mechanisms of their action remain unclear. We studied the pathway of protealysin precursor processing in vitro using standard approaches: modification of the catalytic site and monitoring immobilized precursor maturation. The Glu(113) → Ala substitution inhibited the precursor maturation, which pointed to the autocatalytic processing. The mutant precursor exposure to active protealysin converted it to the mature enzyme, thus, indicating the intermolecular processing. Intermolecular processing of the mutant protein by other proteases such as thermolysin or subtilisin is also possible. The intact protealysin precursor was efficiently autoprocessed in solution but not after immobilization. These data indicate that the processing of protealysin precursor differs from that of classical TLPs. The protealysin propeptide is cleaved by an autocatalytic or heterocatalytic intermolecular mechanism and is most likely not removed intramolecularly.     

Characterization of imipenem-resistant Serratia marcescens producing IMP-type and TEM-type beta-lactamases encoded on a single plasmid

To evaluate the roles of blaIMP and blaTEM genes in the resistance of Serratia marcescens against beta-lactams and to find the spreading ways of these genes, 19 clinical isolates of imipenem-resistant Serratia marcescens were analyzed. Six strains bore blaIMP and blaTEM genes on a single plasmid, as confirmed by transferring resistance determinants via conjugation and transformation, and by detecting bla genes with PCR analysis. The six strains showed two different genomic patterns on pulsed-field gel electrophoresis. All the transconjugants and transformants gained high-level resistance to ampicillin, cephalexin, cefoxitin and cefotaxime, and showed a reduced susceptibility to imipenem, but maintained full susceptibility to aztreonam. In addition, the expressions of blaIMP and blaTEM genes were constitutive, either in Serratia marcescens clinical isolates or in their transconjugants and transformants. These findings may explain the rapid spread of the above resistance determinants among Enterobacteriaceae via transmissible plasmids in the clinical setting.     

Synthesis and evaluation of pyridone-phenoxypropyl-R-2-methylpyrrolidine analogues as histamine H3 receptor antagonists

6-{4-[3-(R)-2-Methylpyrrolidin-1-yl)propoxy]-phenyl}-2H-pyridazin-3-one 6 (Irdabisant; CEP-26401) was recently reported as a potent H(3)R antagonist with excellent drug-like properties and in vivo activity that advanced into clinical evaluation. A series of pyridone analogs of 6 was synthesized and evaluated as H(3)R antagonists. Structure-activity relationships revealed that the 5-pyridone regiomer was optimal for H(3)R affinity. N-Methyl 9b showed excellent H(3)R affinity, acceptable pharmacokinetics and pharmaceutical properties. In vivo evaluation of 9b showed potent activity in the rat dipsogenia model and robust wake-promoting activity in the rat EEG model.     

Synthesis and characterization of cobalt oxide nanoparticles by thermal treatment process

The simple preparation of Co₃O₄ nanoparticles from a solid organometallic molecular precursor N-N′-bis(salicylaldehyde)-1,2-phenylenediimino cobalt(II); Co(salophen) has been achieved via two simple steps: firstly, the Co(salophen) precursor was precipitated from the reaction of cobalt(II) acetate and N-N′-bis(salicylaldehyde)-1,2-phenylenediimino; H₂salophen; in propanol under nitrogen condition; then, cubic phase Co₃O₄ nanoparticles with the size of mostly 30-50 nm could be produced by thermal treatment of the Co(salophen) in air at 773 K for 5 h. The as-synthesized products were characterized by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and scanning electronic microscopy (SEM). These results confirm that the resulting oxide was pure single-crystalline Co₃O₄ nanoparticles. The optical property test indicates that the absorption peak of the nanoparticles shifts towards short wavelength, and the blue shift phenomenon might be ascribed to the quantum effect. The hysteresis loops of the obtained samples reveal the ferromagnetic behaviors the enhanced coercivity (H_c) and decreased saturation magnetization (M_s) in contrast to their respective bulk materials.     

A nucleophilic reaction of acetylacetonatocobalt(III) complexes with nitriles in Lewis acidic conditions

Under Lewis acidic conditions, tris(acetylacetonato)cobalt(Co(acac)₃) reacted with ethoxymethylenemalononitrile (ETMN), analogous derivatives and general aliphatic nitriles to give a new type of β-imino-cobalt(III) complexes. A possible mechanism for this reaction is proposed. In the case of ethyl acetocyanoacetate, an acylated γ-acetylimino-cobalt(III) complex was isolated. The structure of the complex was explained supporting the proposed mechanism. The crystal structures of several complexes were determined by X-ray diffraction. One of the complexes showed prominent crystal dichroic properties in the first absorption band region. Benzoyl cyanide and phthalonitrile did not react with Co(acac)₃ under the same conditions.     

Structures of the Oligosaccharides from the Enzymic Hydrolyzate of Rice-straw Arabinoxylan by a Xylanase of Aspergillus niger

A trisaccharide consisting of two d-xylose units and one l-arabinose unit, and a tetrasaccharide consisting of three d-xylose units and one l-arabinose unit were isolated from the hydrolyzate of rice-straw arabinoxylan by the xylanase I produced by Asp. niger.

The structures of the trisaccharide and the tetrasaccharide were determined to be 3¹-α-l-arabinofuranosylxylobiose ([α]_d^? 80°) and 3¹-α-l-arabinofuranosylxylotriose ([α]_d^? 84°), respectively, by chemical and enzymic methods.

According to the structures of two arabinose-xylose mixed oligosaccharides, it was shown that the rice-straw arabinoxylan is composed of chain of 1,4-linked βd-xylopyranose residues and some of xylose residues have side-chain of 1,3-linked α-l-arabinofuranose.     

Nanoplated bismuth titanate sub-microspheres for protein immobilization and their corresponding direct electrochemistry and electrocatalysis

A layered inorganic perovskite sub-micrometer-scale material, nanoplated bismuth titanate (Bi₄Ti₃O₁₂) sub-microspheres (NBTSMs) constructed with tens of Bi₄Ti₃O₁₂ nanoplates, was for the first time synthesized by a facile hydrothermal synthesis strategy. The NBTSMs were employed as a supporting matrix to explore a novel immobilization and biosensing platform of redox proteins through a combined hydrogen bond and electrostatic assembly process. Biocompatibility, stability, reproducibility, and electrochemical and electrocatalytic properties of the resulting NBTSMs-based composite were studied by UV–vis absorption, FTIR, and electrochemical methods. The research results revealed that the NBTSMs-based composite was a satisfying matrix for proteins to effectively retain their native structure and bioactivity. With advantages of the Bi₄Ti₃O₁₂ layered material, facilitated direct electron transfer of the metalloenzymes with an apparent heterogeneous electron transfer rate constant (k_s) of 20.0 ± 3.8 s⁻¹ was acquired on the NBTSMs-based enzyme electrode. The NBTSMs-based biosensor demonstrated significant electrocatalytic activity for the reduction of hydrogen peroxide with an apparent Michaelis–Menten constant (204 μM), wide linear range (2–430 μM), and low detection limit (0.46 μM, S/N = 3). These indicated that the nanoplate-constructed Bi₄Ti₃O₁₂ sub-microspheres were one of ideal candidate materials for direct electrochemistry of redox proteins and the construction of the related enzyme biosensors, and may find potential applications in biomedical, food, and environmental analysis and detection.     

Crystal structure of the platelet activator convulxin, a disulfide-linked alpha4beta4 cyclic tetramer from the venom of Crotalus durissus terrificus

Convulxin (CVX), a C-type lectin, isolated from the venom of the South American rattlesnake Crotalus durissus terrificus, causes cardiovascular and respiratory disturbances and is a potent platelet activator which binds to platelet glycoprotein GPVI. The structure of CVX has been solved at 2.4A resolution to a crystallographic residual of 18.6% (R(free)=26.4%). CVX is a disulfide linked heterodimer consisting of homologous alpha and beta chains. The heterodimers are additionally linked by disulfide bridges to form cyclic alpha(4)beta(4)heterotetramers. These domains exhibit significant homology to the carbohydrate-binding domains of C-type lectins, to the factor IX-binding protein (IX-bp), and to flavocetin-A (Fl-A) but sequence and structural differences are observed in both the domains in the putative Ca(2+)and carbohydrate binding regions.     

Effects of macro elements and nitrogen source on adventitious root growth and ginsenoside production in ginseng (Panax ginseng C. A. Meyer)

We investigated the effects on ginseng adventitious root growth and ginsenoside production when macro-element concentrations and nitrogen source were manipulated in the culture media. Biomass growth was greatest in the medium supplemented with 0.5-strength NH₄PO₃, whereas ginsenoside accumulation was highest (9.90 mg g^-1 DW) in the absence of NH₄PO₃. At levels of 1.0-strength KNO₃, root growth was maximum, but a 2.0 strength of KNO₃ led to the greatest ginsenoside content (9.85 mg g^-l). High concentrations of MgSO₄ were most favorable for both root growth and ginsenoside accumulation (up to 8.89 mg g^-1 DW). Root growth and ginsenoside content also increased in proportion to the concentration of CaCI₂ in the medium, with the greatest accumulation of ginsenoside (8.91 mg g^-1 DW) occurring at a 2.0 strength. The NH₄/NO₃ ^-- ratio also influenced adventitious root growth and ginsenoside production; both parameters were greater when the NO₃ ^- concentration was higher than that of NH₄ ⁺. Maximum root growth was achieved at an NH₄ ⁺/NO₃ ^- ratio of 7.19/18.50, while ginsenoside production was greatest (83.37 mg L^-1) when NO₃ ^- was used as the sole N source.     

New analogs of 2-methylene-19-nor-(20S)-1,25-dihydroxyvitamin D3 with conformationally restricted side chains: evaluation of biological activity and structural determination of VDR-bound conformations

We have successfully prepared E- and Z- isomers of 17-20 dehydro analogs of 2-methylene-19-nor-(20S)-1alpha,25-dihydroxyvitamin D3 (2MD). Both isomers bind to the recombinant rat vitamin D receptor (VDR) with high affinity. The Z-isomer (Vit-III 17-20Z) displays activity in vivo and in vitro that is similar to 2MD. The in vitro activity of the E-isomer (Vit-III 17-20E) is comparable to the natural hormone, though in vivo this analog is significantly less calcemic. Crystal structures of the rat VDR ligand binding domain complexed with the analogs demonstrate that the Vit-III 17-20Z analog is oriented almost identically to 2MD, with only minor differences induced by the planar configuration around the C17-C20 double bond. The Vit-III 17-20E analog is oriented in a conformation distinct from both 2MD and the natural hormone. The structural comparisons suggest that the position of C21 in the ligand binding site may be an important determinant of biological activity.