Synthesis, properties and solution speciation of lanthanide chloride complexes of triphenylphosphine oxide

The reaction of Ph₃PO with LnCl₃ · nH₂O (Ln=La-Lu ≠ Pm) in a 3.5:1 ratio in acetone produces [LnCl₃(Ph₃PO)₃], whilst from a 6:1 ratio in ethanol the products are [LnCl₂(Ph₃PO)₄]Cl · n(solvate). In the presence of [NH₄][PF₆] in ethanol solution, [LnCl₂(Ph₃PO)₄]PF₆ can be isolated. The last complexes are stable in solution but the [LnCl₃(Ph₃PO)₃] and [LnCl₂(Ph₃PO)₄]Cl partially interconvert in non-coordinating solvents, the neutral species being preferred by the lighter lanthanides, the cationic tetrakis complexes becoming more favoured towards the end of the series. The complexes have been characterised in the solid state by analysis and IR spectroscopy and in solution by ³¹P{¹H} NMR spectroscopy and conductance measurements. The crystal structures of trans-[LnCl₂(Ph₃PO)₄]Cl · nEtOH (Ln=Tb or Yb) and mer-[LnCl₃(Ph₃PO)₃] · 0.5Me₂CO (Ln=La or Ce) are reported and discussed.     

Gallium and indium compounds supported by a [PNP] pincer ligand

The new bis(phosphino)amido ligand, [MePNP^Ph], that incorporates (i) an ortho-tolylene linker between nitrogen and phosphorus and (ii) phenyl substituents on phosphorus, has been synthesized as its protonated derivative, [MePNP^Ph]H, via sequential treatment of (2-Br,4-Me-C₆H₃)₂NH with (i) BuⁿLi, (ii) Ph₂PCl and (iii) HCl. Deprotonation of [MePNP^Ph]H with BuⁿLi in THF affords the lithium derivative which has been isolated as both mono and bis THF adducts, [MePNP^Ph]Li(THF) and [MePNP^Ph]Li(THF)₂. Treatment of [MePNP^Ph]Li(THF)₂ with GaCl₃ and InX₃ (X = Cl, Br, I) gives a series of [MePNP^Ph]MX₂ complexes in which the [PNP] donor binds in a “T”-shaped manner and the metal has a distorted trigonal bipyramidal geometry. The reaction of [MePNP^Ph]Li(THF)₂ with “GaI” yields the Ga-Ga bonded complex [κ²-MePNP^Ph](GaI)(GaI)[κ²-MePNP^Ph] in which the [MePNP^Ph] ligand binds in a κ²-P,N manner. The bis(phosphino)amine [MePNP^Ph]H may also serve as a ligand and treatment of [MePNP^Ph]H with GaBr₃ affords [κ²-{[MePNP^Ph]H}GaBr₂][GaBr₄], in which the [MePNP^Ph]H ligand coordinates in a κ²-P,P manner such that the gallium adopts a tetrahedral geometry.     

Further studies on the coordination chemistry of [Pt2(μ-S)2(PPh3)4] towards indium(III) substrates

The reactivity of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] towards a variety of indium(III) substrates has been explored. Reaction with excess In(NO₃)₃ and halide (KBr or NaI) gave the four-coordinate adducts [Pt₂(μ-S)₂(PPh₃)₄InX₂]⁺[InX₄]⁻ (X = Br, I). An X-ray structure determination on the iodo complex revealed a slightly distorted tetrahedral coordination geometry at indium. In contrast, reaction of [Pt₂(μ-S)₂(PPh₃)₄] with indium(III) chloride was more complex; the ion [Pt₂(μ-S)₂(PPh₃)₄InCl₂]⁺ was initially observed in solution (using ESI mass spectrometry), and isolated as its BPh₄⁻ salt. Analysis of [Pt₂(μ-S)₂(PPh₃)₄InCl₂]⁺[BPh₄]⁻ by ESI MS showed the parent cation when analysed in MeCN solution. However in solutions containing methanol, partial solvolysis occurred to give the di-indium species [{Pt₂(μ-S)₂(PPh₃)₄InCl(OMe)}₂]²⁺ (proposed to contain an In₂(μ-OMe)₂ unit with five-coordinate indium) and its fragment ion [Pt₂(μ-S)₂(PPh₃)₄InCl(OMe)]⁺. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with InCl₃·3H₂O, 8-hydroxyquinoline (HQ) and trimethylamine in methanol gave the adduct [Pt₂(μ-S)₂(PPh₃)₄InQ₂]⁺, isolated as its PF₆⁻ salt. The same cationic complex is formed when [Pt₂(μ-S)₂(PPh₃)₄] is reacted with InQ₃ in methanol, but in this case the product is contaminated with the mononuclear complex [(Ph₃P)₂PtQ]⁺ formed by disintegration of the trinuclear complex [Pt₂(μ-S)₂(PPh₃)₄InQ₂]⁺ with byproduct Q⁻. [(Ph₃P)₂PtQ]⁺BPh₄⁻ was independently prepared from cis-[PtCl₂(PPh₃)₂] and HQ/Me₃N, and is the first example of a platinum 8-hydroxyquinolinate complex containing phosphine ligands.     

Syntheses and michael additions to vinylidene diphosphine complexes of type [M(CO)4{(Ph2P)2CCH2}] (MCr,Mo or W)

Treatment of [M(CO)₄Ph₂PCHPPh₂]⁻ with CH₃- OCH₂Cl at 20 °C gave the methoxymethyl derivations [M(CO)₄{Ph₂PCH(CH₂OCH₃)PPh₂}] (MCr or W), but a similar treatment at 80 °C gave derivatives of a vinylidene diphosphine [M(CO)₄(Ph₂P)₂C CH₂]. Treatment of [M(CO)₄Ph₂PCHPPh₂]⁻with CH₃CHClOCH₃ at 20 or 80 °C gave only [M(CO)₄- (Ph₂P)₂CHCH(CH₃)OCH₃] (MCr or W). The vinylidene diphosphine complexes [M(CO)₄(Ph₂P)2- CCH₂] (MCr, Mo or W) were even more easily prepared by treating [M(CO)₆] with (Ph₂P)₂CCH₂ (vdpp) in hot solvents such as CH₃OCH₂CH₂OCH₂- CH₂OCH₃.Treatment of [W(CO)₄vdpp] with LiBuⁿ followed by methanol gave [W(CO)₄(Ph₂P)₂CHCH₂Buⁿ] (1c), i.e. conjugate addition to the CCH₂ occurs. 1c was also made by treating [W(CO)₄(Ph₂P)₂CH]⁻ with n-pentyl-iodide. Similarly LiMe was added to [W(CO)₄(Ph₂P)₂CCH₂]. Treatment of [M(CO)₄- vdpp] with NaCH(COOEt)₂ gave [M(CO)₄(Ph₂- P)₂CHCH₂CH(COOEt)₂] (MW or Mo). Pyrrolidine added to the CCH₂ bonds of [M(CO)₄vddp] to give [M(CO)₄(Ph₂P)₂CHCH₂NC₄H₈]. ³¹p and ¹H NMR and IR data are given.     

Thallium(III) complexes of the metalloligands [Pt2(μ-S)2(PPh3)4] and [Pt2(μ-Se)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the diarylthallium(III) bromides Ar₂TlBr [Ar = Ph and p-ClC₆H₄] in methanol gave good yields of the thallium(III) adducts [Pt₂(μ-S)₂(PPh₃)₄TlAr₂]⁺, isolated as their salts. The corresponding selenide complex [Pt₂(μ-Se)₂(PPh₃)₄TlPh₂]BPh₄ was similarly synthesised from [Pt₂(μ-Se)₂(PPh₃)₄], Ph₂TlBr and NaBPh₄. The reaction of [Pt₂(μ-S)₂(PPh₃)₄] with PhTlBr₂ gave [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]⁺, while reaction with TlBr₃ gave the dibromothallium(III) adduct [Pt₂(μ-S)₂(PPh₃)₄TlBr₂]⁺[TlBr₄]⁻. The latter complex is a rare example of a thallium(III) dihalide complex stabilised solely by sulfur donor ligands. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄TlPh₂]BPh₄, [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]BPh₄ and [Pt₂(μ-S)₂(PPh₃)₄TlBr₂][TlBr₄] reveal a greater interaction between the thallium(III) centre and the two sulfide ligands on stepwise replacement of Ph by Br, as indicated by shorter Tl-S and Pt?Tl distances, and an increasing S-Tl-S bond angle. Investigations of the ESI MS fragmentation behaviour of the thallium(III) complexes are reported.     

Influence of chain length on mono- versus di-alkylation in the reactivity of [Pt2(μ-S)2(PPh3)4] towards α,ω-dihalo-n-alkanes; a synthetic route to platinum(II) ω-haloalkylthiolate complexes

The reactions of [Pt₂(μ-S)₂(PPh₃)₄] with α,ω-dibromoalkanes Br(CH₂)_nBr (n = 4, 5, 6, 8, 12) gave mono-alkylated [Pt₂(μ-S){μ-S(CH₂)_nBr}(PPh₃)₄]⁺ and/or di-alkylated [Pt₂(μ-S(CH₂)_nS}(PPh₃)₄]²⁺ products, depending on the alkyl chain length and the reaction conditions. With longer chains (n = 8, 12), intramolecular di-alkylation does not proceed in refluxing methanol, with the mono-alkylated products [Pt₂(μ-S){μ-S(CH₂)_nBr}(PPh₃)₄]⁺ being the dominant products when excess alkylating agent is used. The bridged complex [{Pt₂(μ-S)₂(PPh₃)₄}₂{μ-(CH₂)₁₂}]²⁺ was accessible from the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with 0.5 mol equivalents of Br(CH₂)₁₂Br. [Pt₂(μ-S){μ-S(CH₂)₄Br}(PPh₃)₄]⁺ can be cleanly isolated as its BPh₄⁻ salt, but undergoes facile intramolecular di-alkylation at −18 °C, giving the known species [Pt₂(μ-S(CH₂)₄S}(PPh₃)₄]²⁺. The reaction of I(CH₂)₆I with [Pt₂(μ-S)₂(PPh₃)₄] similarly gives [Pt₂(μ-S){μ-S(CH₂)₆I}(PPh₃)₄]⁺, which is fairly stable towards intramolecular di-alkylation once isolated. These reactions provide a facile route to ω-haloalkylthiolate complexes which are poorly defined in the literature. X-ray crystal structures of [Pt₂(μ-S){μ-S(CH₂)₅Br}(PPh₃)₄]BPh₄ and [Pt₂(μ-S(CH₂)₅S}(PPh₃)₄](BPh₄)₂ are reported, together with a study of these complexes by electrospray ionisation mass spectrometry. All complexes fragment by dissociation of PPh₃ ligands, and the bromoalkylthiolate complexes show additional fragment ions [Pt₂(μ-S){μ-S(CH₂)_n−2CHCH₂}(PPh₃)_m]⁺ (m = 2 or 3; m ≠ 4), most significant for n = 4, formed by elimination of HBr.     

Syntheses and structures of the heterometallic clusters [(Ph3PAu)3Re(CO)4], [(Ph3PAu)4Re(CO)4], [(Ph3PAu)6AuRe2(CO)8], and [(Ph3PAu)6Re(CO)3]

The reaction of [HRe₃(CO)₁₂]²⁻ with an excess of Ph₃PAuCl in CH₂Cl₂ yields [(Ph₃PAu)₄Re(CO)₄]⁺ as the main product, which crystallizes as [(Ph₃PAu)₄Re(CO)₄]PF₆ · CH₂Cl₂ (1 · CH₂Cl₂) after the addition of KPF₆.The crystal structure determination reveals a trigonal bipyramidal Au₄Re cluster with the Re atom in equatorial position.If [(Ph₃PAu)₄Re(CO)₄]⁺ is reacted with PPh₄Cl, a cation [Ph₃PAu]⁺ is eliminated as Ph₃PAuCl, and the neutral cluster [(Ph₃PAu)₃Re(CO)₄] (2) is formed.It combines with excess [(Ph₃PAu)₄Re(CO)₄]⁺ to afford the cluster cation, [(Ph₃PAu)₆AuRe₂(CO)₈]⁺. It crystallizes from CH₂Cl₂ as[(Ph₃PAu)₆AuRe₂(CO)₈]PF₆ · 4CH₂Cl₂ (3 · 4CH₂Cl₂). In [(Ph₃PAu)₃Re(CO)₄] the metal atoms are arranged in form of a lozenge while in [(Ph₃PAu)₆AuRe₂(CO)₈]⁺ two Au₄Re trigonal bipyramids are connected by a common axial Au atom.The treatment of [(Ph₃PAu)₄Re(CO)₄]⁺ with KOH and Ph₃PAuCl in methanol yields the cluster cation [(Ph₃PAu)₆Re(CO)₃]⁺, which crystallizes with from CH₂Cl₂ as [(Ph₃PAu)₆Re(CO)₃]PF₆ · CH₂Cl₂ (4 · CH₂Cl₂). The metal atoms in this cluster form a pentagonal bipyramid with the Re atom in the axial position.     

The arylation of [Pt2(μ-S)2(PPh3)4]

Routes to the synthesis of the mixed sulfide-phenylthiolate complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ have been explored; reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess Ph₂IBr proceeds readily to selectively produce this complex, which was structurally characterised as its PF₆⁻ salt. Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with other potent arylating reagents (1-chloro-2,4-dinitrobenzene and 1,5-difluoro-2,4-dinitrobenzene) also produce the corresponding nitroaryl-thiolate complexes [Pt₂(μ-S){μ-SC₆H₂(NO₂)₂X}(PPh₃)₄]⁺ (X = H, F). The complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ reacts with Me₂SO₄ to produce the mixed alkyl/aryl bis-thiolate complex [Pt₂(μ-SMe)(μ-SPh)(PPh₃)₄]²⁺, but corresponding reactions with the nitroaryl-thiolate complexes are plagued by elimination of the nitroaryl group and formation of [Pt₂(μ-SMe)₂(PPh₃)₄]²⁺. [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ also reacts with Ph₃PAuCl to give [Pt₂(μ-SAuPPh₃)(μ-SPh)(PPh₃)₄]²⁺.     

A 31P1H NMR study of the reactions of [Rh2(μ-Cl)2(cod)2] with unsymmetrical,bidentate ligands and hydrogen

[Rh₂(μ-Cl)₂(cod)₂] reacts with Ph₂PCH₂CH₂OMe (PC₂O), Ph₂P(CH₂)₃NMe₂ (PC₃N), PBuⁿPh₂ or PPh₃ to give [Rh(cod)L₂]Cl (L = PC₂O, PC₃N, PBuⁿPh₂, PPh₃). In the presence of hydrogen, [Rh(cod)L₂]Cl is converted to [RhClH₂L₃]. In contrast, [Rh(cod)(PC₂O)₂]BPh₄ reacts with H₂ to give [RhH₂(PC₂O)₂S₂]BPh₄ (S = solvent). With Ph₂PCH₂CH₂NMe₂ (PC₂N) or Ph₂PCH₂CH₂SMe (PC₂S), [Rh₂(μ-Cl)₂(cod)₂] reacts to form the chelate complexes cis- [Rh(PC₂N)₂]⁺ or cis-[Rh(PC₂S)₂]⁺, neither of which reacts with hydrogen under ambient conditions. The products of the reactions are characterized in situ by ³¹P¹H NMR spectroscopy.     

Heterobimetallic platinum-bismuth aggregates derived from [Pt2(μ-S)2(PPh3)4]

The metalloligand [Pt₂(μ-S)₂(PPh₃)₄] reacts with Bi(S₂CNEt₂)₃ or Bi(S₂COEt)₃ in methanol to produce the orange cationic adducts [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]⁺ and [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂COEt)₂]⁺, respectively, isolated as their hexafluorophosphate salts. An X-ray structure determination on [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]PF₆ reveals the presence of a six-coordinated bismuth centre with an approximately nido-pentagonal bipyramidal coordination geometry. Fragmentation pathways for both complexes have been probed using electrospray ionisation mass spectrometry; ions [Pt₂(μ-S)₂(PPh₃)₂Bi(S₂CXEt_n)₂]⁺ (X = O, n = 1, X = N, n = 2) are formed by selective loss of two PPh₃ ligands, and at higher cone voltages the species [(Ph₃P)PtS₂Bi]⁺ is observed. Ions formed by loss of CS₂ are also observed for the xanthate but not the dithiocarbamate ions.     

‘Synthetic prospecting’ using an electrospray ionisation mass spectrometry directed survey of the alkylation and arylation chemistry of [Pt2(μ-S)2(PPh3)4]

Electrospray ionisation mass spectrometry (ESI-MS) has been used as an analytical tool in a wide-ranging scoping study of the alkylation and arylation reactions of [Pt₂(μ-S)₂(PPh₃)₄]. From these experiments, the factors that influence the formation of different product species - formed by mono- or di-alkylation - are determined. If the alkylating agent is an alkyl chloride or sulfate, monoalkylation followed by dialkylation of the two sulfido groups occurs, dependent on the alkylating power of the reagent used. For example, n-butyl chloride gives solely [Pt₂(μ-S)(μ-SBu)(PPh₃)₄]⁺ while dimethyl sulfate gives [Pt₂(μ-SMe)₂(PPh₃)₄]²⁺. This species, previously unisolated is stable in the absence of good nucleophiles, but the addition of potassium iodide results in rapid conversion to [Pt₂(μ-SMe)₂(PPh₃)₃I]⁺. This iodo complex is also observed from the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess MeI, after the initial formation of mono- and di-methylated species. In these reactions, the iodide presumably displaces a phosphine ligand, which is then quaternised by excess alkylating agent. Changing the alkylating agent to a longer chain alkyl iodide or methyl bromide decreases the rate of alkylation of the sulfide in the initially formed [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺. Mixed-thiolate species of the type [Pt₂(μ-SMe)(μ-SR)(PPh₃)₄]²⁺ are easily generated by reaction of [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺ with excess Me₂SO₄ and is also dependent on the avoidance of nucleophiles. Reactions towards α,ω-dialkylating agents are surveyed; the chain length is found to have a dramatic effect on the rate of the second intramolecular cyclisation process, illustrated by a competitive reactivity study involving a mixture of Br(CH₂)₄Br and Br(CH₂)₅Br; on completion of the reaction the former gives [Pt₂{μ-S(CH₂)₄S}(PPh₃)₄]²⁺ while the latter predominantly gives monoalkylated[Pt₂(μ-S){μ-S(CH₂)₅Br}(PPh₃)₄]⁺. The reactivity of o- and p-dihaloxylenes has been explored, with the reaction with p-BrCH₂C₆H₄CH₂Br giving the bridged species [(PPh₃)₄Pt₂(μ-S)(μ-SCH₂C₆H₄CH₂S)(μ-S)Pt₂(PPh₃)₄]²⁺. Arylation reactions of [Pt₂(μ-S)₂(PPh₃)₄] with halobenzenes and 2-bromoheterocyclic compounds (pyridine, thiophene) are also described.     

The influence of substituents (R) at N atom of thiophene-2-carbaldehyde thiosemicarbazones {(C4H3S)HCN-N(H)-C(S)NHR} on bonding, nuclearity and H-bonded networks of copper(I) complexes

The nuclearity, bonding and H-bonded networks of copper(I) halide complexes with thiophene-2-carbaldehyde thiosemicarbazones {(C₄H₃S)HC²N³-N(H)-C¹(S)N¹HR} are influenced by R substituents at N¹ atom. Thiophene-2-carbaldehyde-N¹-methyl thiosemicarbazone (HttscMe) or thiophene-2-carbaldehyde-N¹-ethyl thiosemicarbazone (HttscEt) have yielded halogen-bridged dinuclear complexes, [Cu₂(μ-X)₂(η¹-S-Htsc)₂(Ph₃P)₂] (Htsc, X: HttscMe, I, 1; Br, 2; Cl, 3; HttscEt, I, 4; Br, 5; Cl, 6), while thiophene-2-carbaldehyde-N¹-phenyl thiosemicarbazone (HttscPh) has yielded mononuclear complexes, [CuX(η¹-S-HttscPh)₂] (X, I, 7a; Br 8; Cl, 9) and a sulfur bridged dinuclear complex, [Cu₂(μ-S-HttscPh)₂(η¹-S-HttscPh)₂I₂] 7b co-existing with 7a in the same unit cell. These results are in contrast to S-bridged dimers [Cu₂(μ-S-Httsc)₂(η¹-Br)₂(Ph₃P)₂] · 2H₂O and [Cu₂(μ-S-Httsc)₂(η¹-Cl)₂(Ph₃P)₂] · 2CH₃CN obtained for R = H and X = Cl, Br (Httsc = thiophene-2-carbaldehyde thiosemicarbazone) as reported earlier. The intermolecular CH_Ph?π interaction in 1-3 (2.797 Å, 1; 3.264 Å, 2; 3.257 Å, 3) have formed linear polymers, whereas the CH_Ph?X and N³?HCH interactions in 4-6 (2.791, 2.69 Å, 5; 2.776, 2.745 Å, 6, respectively) have led to the formation of H-bonded 2D polymer. The PhN¹H?π, interactions (2.547 Å, 8, 2.599 Å, 9) have formed H-bonded dimers only. The Cu?Cu separations are 3.221-3.404 Å (1-6).     

Synthesis and reactions of [M(CO)4(Ph2PSiMe3)X] complexes (M = Mn,Re; X = Halogen)

The silylphosphine ligand Ph₂PSiMe₃ reacts readily with a slurry of [Re(CO)₅X] (X  Cl, Br) in polar and in non-polar solvents to yield soluble cis-[Re(CO)₄- (Ph₂PSiMe₃)X] (Ia, X  Cl;Ib, X  Br) via CO substitution. Compound I is readily hydrolyzed by water or silica gel to cis-[Re(CO)₄(Ph₂PH)X]. Compound Ib reacts with [Re(CO)₅Br] to yield [Re₂(CO)₈(μ-PPh₂)- (μ-Br)] (II), and with [Mn(CO)₅Br] to yield [MnRe- (CO)₈(μ-PPh₂)(μ-Br)] (III).The reaction of Ph₂PSiMe₃ with [Mn(CO)₅X] (X=Cl,Br,I) is highly dependent upon reaction conditions.In polar and in non-polar solvents, an excess of ligand gives mainly cis-[Mn(CO)₄(Ph₂PSiMe₃)X] (IVa, X  Cl;IVb, X  Br;IVc, X I). With ligand: [Mn(CO)₅X] reacting ratios in the range 0.5–1.0:1, the products from the three respective halomanganese complexes in THF were: (a) mainly [Mn₂(CO)₈(μ- PPh₂)(μ-Cl) (Va); (b) both [Mn(CO)₄(Ph₂PSiMe₃)Br] and [Mn₂(CO)₈(μ-PPh₂)(μ-Br)] (Vb); and (c) exclusively [Mn(CO)₄(Ph₂PSiMe₃)I]. The compounds IVa-c are stable in solution at ambient temperatures and are readily hydrolyzed by water or methanol to [Mn(CO)₄(Ph₂PH)X]. Compound IVb reacts at room temperature with [Mn(CO)₅Cl] to yield only [Mn₂- (CO)₈(μ-PPh₂)(μ-Br)] (Vb); compound IVc reacts in hot toluene with [Mn(CO)₅Cl] to yield mainly [Mn₂(CO)₈(μ-PPh₂)(μ-I)] (Vc), together with a small amount of the chloro-bridged analog.The dinuclear species II, III and Va-c appear to be formed mainly via an intermolecular elimination of Me₃SiX from the appropriate [M(CO)₄(Ph₂PSiMe₃)X] and metalpentacarbonylhalide (chloride or bromide) complexes.     

Further studies on the dialkylation chemistry of [Pt2(μ-S)2(PPh3)4] with activated alkyl halides RC(O)CH2X (X = Cl, Br)

Further studies have been carried out into the reactivity of [Pt₂(μ-S)₂(PPh₃)₄] towards a range of activated alkylating agents of the type RC(O)CH₂X (R = organic moiety, e.g. phenyl, pyrenyl; X = Cl, Br). Alkylation of both sulfide centers is observed for PhC(O)CH₂Br, 3-(bromoacetyl)coumarin [CouC(O)CH₂Br], and 1-(bromoacetyl)pyrene [PyrC(O)CH₂Br], giving dications [Pt₂{μ-SCH₂C(O)R}₂(PPh₃)₄]²⁺, isolated as their PF₆⁻ salts. The X-ray structure of [Pt₂{μ-SCH₂C(O)Ph}₂(PPh₃)₄](PF₆)₂ shows the presence of short Pt?O contacts. In contrast, the corresponding chloro compounds [typified by PhC(O)CH₂Cl] and imino analogues [e.g. PhC(NOH)CH₂Br] do not dialkylate [Pt₂(μ-S)₂(PPh₃)₄]. The ability of PhC(O)CH₂Br to dialkylate [Pt₂(μ-S)₂(PPh₃)₄] allows the synthesis of new mixed-alkyl dithiolate derivatives of the type [Pt₂{μ-SCH₂C(O)Ph}(μ-SR)(PPh₃)₄]²⁺ (R = Et or n-Bu), through alkylation of in situ-generated monoalkylated compounds [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺ (from [Pt₂(μ-S)₂(PPh₃)₄] and excess RBr). In these heterodialkylated systems ligand replacement of PPh₃ occurs by the bromide ions in the reaction mixture forming monocations [Pt₂{μ-SCH₂C(O)Ph}(μ-SR)(PPh₃)₃Br]⁺. This ligand substitution can be easily suppressed by addition of PPh₃ to the reaction mixture. The complex [Pt₂{μ-SCH₂C(O)Ph}(μ-SBu)(PPh₃)₄]²⁺ was crystallographically characterized. X-ray crystal structures of the bromide-containing complexes [Pt₂{μ-SCH₂C(O)Ph}(μ-SR)(PPh₃)₃Br]⁺ (R = Et, Bu) are also reported. In both structures the coordinated bromide is trans to the SCH₂C(O)Ph ligand, which adopts an axial position, while the ethyl and butyl substituents adopt equatorial positions, in contrast to the structures of the dialkylated complexes [Pt₂{μ-SCH₂C(O)Ph}₂(PPh₃)₄]²⁺ and [Pt₂{μ-SCH₂C(O)Ph}(μ-SBu)(PPh₃)₄]²⁺ (and many other known analogues) where both alkyl groups adopt axial positions.     

N-Heterocyclic carbene gold(I) and silver(I) adducts of [Pt2(μ-S)2(PPh3)4]

Reaction of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] with the N-heterocyclic carbene (NHC) complexes IPrAuCl, IMesAuCl and IMesAgCl in methanol gave the first examples of metal adducts of [Pt₂(μ-S)₂(PPh₃)₄] that contain NHC ligands, namely [Pt₂(μ-S)₂(PPh₃)₄AuL]⁺ (L = IPr, IMes) and [Pt₂(μ-S)₂(PPh₃)₄AgIMes]⁺. The complexes were isolated as hexafluorophosphate salts. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess IPrAuCl in refluxing methanol yielded only the mono-adduct, in contrast to the behaviour with the gold(I) phosphine complex Ph₃PAuCl, which undergoes double addition giving [Pt₂(μ-SAuPPh₃)₂(PPh₃)₄]²⁺. The X-ray structure of [Pt₂(μ-S)₂(PPh₃)₄AuIPr]PF₆ was determined and reveals that the ‘free’ sulfide is substantially sterically protected by the IPr ligand, accounting for the low reactivity towards addition of a second AgIPr⁺ moiety.     

Heteroligand copper(I) complexes of N-thiophosphorylated thioureas and phosphanes: Versatile structures and luminescence

Reaction of the potassium salts of (EtO)₂P(O)CH₂C₆H₄-4-(NHC(S)NHP(S)(OiPr)₂) (HL^I), (CH₂NHC(S)NHP(S)(OiPr)₂)₂ (H₂L^II) or cyclam(C(S)NHP(S)(OiPr)₂)₄ (H₄L^III) with [Cu(PPh₃)₃I] or a mixture of CuI and Ph₂P(CH₂)_1-3PPh₂ or Ph₂P(C₅H₄FeC₅H₄)PPh₂ in aqueous EtOH/CH₂Cl₂ leads to [Cu(PPh₃)L^I] (1), [Cu₂(Ph₂PCH₂PPh₂)₂L^II] (2), [Cu{Ph₂P(CH₂)₂PPh₂}L^I] (3), [Cu{Ph₂P(CH₂)₃PPh₂}L^I] (4), [Cu{Ph₂P(C₅H₄FeC₅H₄)PPh₂}L^I] (5), [Cu₂(PPh₃)₂L^II] (6), [Cu₂(Ph₂PCH₂PPh₂)L^II] (7), [Cu₂{Ph₂P(CH₂)₂PPh₂}₂L^II] (8), [Cu₂{Ph₂P(CH₂)₃PPh₂}₂L^II] (9), [Cu₂{Ph₂P(C₅H₄FeC₅H₄)PPh₂}₂L^II] (10), [Cu₈(Ph₂PCH₂PPh₂)₈L^IIII₄] (11), [Cu₄{Ph₂P(CH₂)₂PPh₂}₄L^III] (12), [Cu₄{Ph₂P(CH₂)₃PPh₂}₄L^III] (13) or [Cu₄{Ph₂P(C₅H₄FeC₅H₄)PPh₂}₄L^III] (14) complexes. The structures of these compounds were investigated by IR, ¹H, ³¹P{¹H} NMR spectroscopy; their compositions were examined by microanalysis. The luminescent properties of the complexes 1-14 in the solid state are reported.     

A new bifunctional amino acid chelator targeting the glucose transporter

The coupling reactions of d-glucosamine, 1,3,4,6-tetra-O-acetylglucosamine, and 4-aminophenyl-galactopyranosine with N,N-bis(quinolinoyl)aminovaleric acid (L1) provided a series of conjugates containing a potentially tridentate donor group terminus linked to a sugar moiety, L2′, L2 and L3, respectively. Reactions of the ligands with [NEt₄]₂[Re(CO)₃Br₃] in refluxing methanol provided the rhenium complexes [Re(CO₃)(L1)]Br (ReL1), [Re(CO)₃(L2)]Br (ReL2), [Re(CO)₃(L2′)]Br (ReL2′) and [Re(CO)₃(L3)]Br (ReL3). The ligands and complexes were characterized by elemental analyses, ¹H and ¹³C NMR, mass spectroscopy and, in the case of L1 and ReL1, by X-ray crystallography. The rhenium complexes exhibit fluorescence emissions with long lifetimes, large Stokes shifts, and moderate quantum yields.     

A new route to N(1)-5R-tetrazole complexes via azidation to nitriles coordinated to Pt(II) and Pt(IV)

New tetrazolate complexes trans-[PtCl₂(RCN₄)₂]²⁻, trans-[PtCl₄(RCN₄)₂]²⁻ with Ph₃PCH₂Ph⁺ and (CH₃)₂NH₂⁺ counterions have been obtained by azidation of nitriles coordinated to Pt(II) and Pt(IV) {trans-[PtCl₂(RCN)₂] and trans-[PtCl₄(RCN)₂] (R = Et, Ph)} and characterized. The composition and the molecular structure of the complexes obtained were established by the СHN elemental analyses, ¹Н and ¹³С NMR spectroscopy, IR spectroscopy, mass spectrometry, and X-ray diffraction. The coordination of nitriles to Pt(II) and Pt(IV) is shown significantly activate the azidation: the reaction proceeds with a higher rate and at relatively low temperature compared with the classical 1,3-dipolar addition of azides to nitriles.     

Unexpected magnetic topology in the heterobimetallic [ReBr4(μ-ox)Cu(bpy)2] compound

A novel oxalato-bridged rhenium(IV)-copper(II) compound, namely [Re^IVBr₄(μ-ox)Cu^II(bpy)₂] (1), has been obtained by reacting (PPh₄)₂[ReBr₄(ox)] with Cu(CF₃SO₃)₂ and 2,2′-bpy in CH₃CN, and its crystal structure determined by single-crystal X-ray diffraction. Intermolecular Br?Br interactions and nonbonding Cu?Br type contacts between the heterobimetallic dinuclear units lead to a two-dimensional supramolecular structure. Compound 1 behaves magnetically as a [Re^IVCu^II]₂ tetranuclear species with weak antiferromagnetic interactions through the oxalato bridge and intermolecular Br?Br contacts.     

Transition metal nitrosyls as nitrosylation agents. IV. 51V NMR characteristics of dinitrosyl and carbonylmononitrosyl vanadium complexes

The action of [Co(X)(NO)₂]₂ (X = Cl, Br, L) on [V(H)(CO)_6?nL_n] (L = 1/ndi- and tritertiary phosphine; n = 2, 3) in thf yields [V(CO)_5?n(NO)L₂] and [V(NO)₂(thf)₄]X as the two main products. Thf is easilty replaced by other ligands L′, leading to the complexes cis-[V(NO)₂(thf)_4?nL′_n]X, where n = 1 to 4. In the case of L′= CNR (R = Cy, iPr, tBu), the species [VX(NO)₂L′₃] are formed. The presence of X in the first coordination sphere is established by the normal halogen dependence (Cl < Br < I) of ⁵¹V shielding.δ(⁵¹V) values have been obtained for the two series of complexes and compared with δ of other nitrosylvanadium species, including [VX(NO)L′₄]X. for [V(NO)₂L′₄]br, ⁵¹V shielding increases in the sequence {O} < {S} < NR₃ < NCMe < AsEt₃ < SbEt₃ < PEt₂Ph < P(OMe)₃ < CNR, reflecting a general increase of shielding as the polarizability of the ligand function increases and its electronegativity decreases. Superimposed effects arising from electronic influences (PEtPh₂) < PMe₃ < P(OMe)₃ and steric conditions (chelate-4 ring < 7 ring < 6 ring < 5 ring) are also discussed. Steric factors are especially pronounced in the [V(CO)₃(NO)Ph₂P(CH₂)_mPPh₃] series (m = 1–4). The thermo-labile parent compound, [V(CO)₅NO], has been characterized by its δ(⁵¹V) = ?1489 ppm at 245 K.