Syntheses of some new methylcyclopentadienylmolybdenum complexes: Characterizations, crystal structures and comparisons with related complexes

As part of a long-term study of the substitution reactions of piano-stool type cyclopentadienylmetal carbonyl complexes, several new methylcyclopentadienylmolybdenum compounds have been prepared and characterized by methods including IR spectroscopy, electrospray ionization mass spectrometry and X-ray crystallography. The complexes reported here include [{Cp′Mo(CO)₃}₂I]BPh₄, cis-Cp′Mo(CO)₂(PPh₃)I and [Cp′Mo(CO)₃(CH₃CN)]BF₄ (Cp′ = η⁵-C₅H₄CH₃). In addition to their syntheses, comparisons are made between their IR spectroscopic and X-ray crystal structure data and those of similar complexes.     

First crystallographic determination of dichloro-bridged dinuclear rhodium Cp* complex with neutral Me2CO molecules. [Rh2(Cp*)2(μ-Cl)2(Me2CO)2](BF4)2 (Cp* = η-C5Me5)

The single crystals of dichloro-bridged dinuclear Rh-Cp* complex with neutral Me₂CO molecules, [Rh₂(Cp*)₂(μ-Cl)₂(Me₂CO)₂](BF₄)₂ (Cp* = η⁵-C₅Me₅), was isolated and the structure was in first determined crystallographically.     

Syntheses and structural characterization of mononuclear Rh-Cp* and Ir-Cp* complexes with η-phenanthrene, η-pyrene and η-triphenylene

Four novel mononuclear Rh-Cp* and Ir-Cp* complexes with polycyclic aromatic hydrocarbons (PAHs), [M(Cp*)(η⁶-PAHs)](BF₄)₂ (M = Rh and Ir; Cp* = η⁵-C₅Me₅; PAHs = phenanthrene (phn), pyrene (pyr) and triphenylene (triph)), were prepared by the reactions of the intermediate [M(Cp*)(Me₂CO)₃]²⁺ with appreciable PAHs. Their structures were characterized by a single crystal X-ray analysis, ¹H, ¹³C {¹H} NMR and 2D NMR techniques. The X-ray crystallographic studies showed that the [M(Cp*)]²⁺ fragment is η⁶-coordinated to one terminal benzene ring in each PAH. In particular, it is interesting to note that the partial π/π/π/π interaction was formed in the Ir-pyr complex [Ir(Cp*)(η⁶-pyr)](BF₄)₂. The 1D and 2D NMR studies described that the Rh-Cp* and Ir-Cp* complexes with PAHs gave unique ¹H and ¹³C {¹H} NMR spectra with positive coordination shifts (Δδ(¹H, ¹³C)) in (CD₃)₂CO at 23 °C, which are likely induced by the local effect and the non-local effect on the coordination of the [M(Cp*)]²⁺ fragment to PAHs. The decreasing of the coupling constants (³J_H-H) in the η⁶-coordinated benzene ring is also induced, with no changes in the uncoordinated benzene rings. The time-course of ¹H NMR spectra showed that Rh-Cp* and Ir-Cp* complexes with PAHs are partially dissociated to [M(Cp*)(Me₂CO)₃]²⁺ and metal-free PAHs in (CD₃)₂CO at 23 °C. It was demonstrated that their stabilities are in the order of Ir-triph, Ir-phn, Ir-pyr and Rh-triph complexes in (CD₃)₂CO.     

Simple synthesis of organo-iron complexes from iron-sandwich raw materials using visible light

Piano-stool organo-iron complexes [CpFeL₁L₂L₃]⁺ bearing a variety of ligands (Cp = η⁵-C₅H₅, L = neutral 2-electron ligand) can be readily synthesized by visible photolysis of any member of the family of [FeCp(arene)][PF₆] sandwich complexes (arene = η⁶-arene) including those in which the arene is mono-, bis or trisubstituted. A short review is provided for these reactions and processes and their applications in organo-iron synthesis.     

Dinuclear ruthenium(II) catecholato and 2,3-naphthalenediolato complexes featuring κ-diaryloxo/η-arene coordination mode

A new dinuclear ruthenium(II) catecholato complex [Cp*Ru(κ²:η⁶-μ₂-1,2-O₂C₆H₄)RuCp*] (3; Cp* = η⁵-C₅Me₅) has been prepared by the reaction of [Cp*RuCl]₄ with 2 equiv. of disodium catecholate in THF. Complex 3 has a dinuclear structure, in which one of the Cp*Ru fragments is κ²-bonded to the two oxygen atoms and the other is η⁶-bonded to the aromatic ring. Similar treatment of [Cp*RuCl]₄ with disodium 2,3-naphthalenediolate affords an analogous κ²:η⁶-bonded dinuclear complex [Cp*Ru(κ²:η⁶-μ₂-2,3-O₂C₁₀H₆)RuCp*] (4) with selective π-complexation at the oxygen-substituted naphthalene ring. The molecular structure of 4 has been determined by X-ray crystallography. The oxygen-bound ruthenium atoms in complexes 3 and 4 are coordinatively unsaturated and readily uptake 1 equiv. of carbon monoxide to give the corresponding carbonyl adducts [Cp*Ru(CO)(κ²:η⁶-μ₂-1,2-O₂C₆H₄)RuCp*] (5) and [Cp*Ru(CO)(κ²:η⁶-μ₂-2,3-O₂C₁₀H₆)RuCp*] (6), respectively.     

Synthesis and properties of new trinuclear Mo(II) complexes containing imidazole and benzimidazole ferrocene units

The reaction of FcCOCl (Fc = (C₅H₅)Fe(C₅H₄)) with benzimidazole or imidazole in 1:1 ratio gives the ferrocenyl derivatives FcCO(benzim) (L1) or FcCO(im) (L2), respectively. Two molecules of L1 or L2 can replace two nitrile ligands in [Mo(η³-C₃H₅)(CO)₂(CH₃CN)₂Br] or [Mo(η³- C₅H₅O)(CO)₂(CH₃CN)₂Br] leading to the new trinuclear complexes [Mo(η³-C₃H₅)(CO)₂(L)₂Br] (C1 for L = L1; C3 for L = L2) and [Mo(η³-C₅H₅O)(CO)₂(L)₂Br] (C2 for L = L1; C4 for L = L2) with L1 and L2 acting as N-monodentade ligands. L1, L2 and C2 were characterized by X-ray diffraction studies. [Mo(η³-C₅H₅O)(CO)₂(L1)₂Br] was shown to be a trinuclear species, with the two L1 molecules occupying one equatorial and one axial position in the coordination sphere of Mo(II). Cyclic voltammetric studies were performed for the two ligands L1 and L2, as well as for their molybdenum complexes, and kinetic and thermodynamic data for the corresponding redox processes obtained. In agreement with the nature of the frontier orbitals obtained from DFT calculations, L1 and L2 exhibit one oxidation process at the Fe(II) center, while C1, C3, and C4 display another oxidation wave at lower potentials, associated with the oxidation of Mo(II).     

Synthesis and characterization of deuterium-labelled (fulvene)M(CO)3 complexes (M = Cr, Mo)

The preparation and characterization of a series of deuterium-labelled (fulvene)M(CO)₃ (M = Cr, Mo) complexes is reported. (η⁵-6-Dimethylaminofulvene-d₂)Cr(CO)₃ and (η⁵-6-dimethylaminofulvene-d₂)Mo(CO)₃ were obtained in high yields by reacting the deuterated fulvene ligands with (MeCN)₃M(CO)₃ (M = Cr, Mo). In addition, syntheses of 6,6-diphenylfulvene-d₁₀ and 6,6-diphenyl-1,2-benzofulvene-d₁₀ as well as the corresponding tricarbonylchromium complexes are described.     

Unusual bond activation processes in the reaction of group 4 cyclopentadienyl alkyne complexes with azobenzene

The alkyne complexes [Cp′₂M(L)(η²-Me₃SiC₂SiMe₃)] (Cp′ = substituted or unsubstituted cyclopentadienyl; M = Ti, Zr, Hf; L = Py, THF) can serve as metallocene precursors by substitution of the alkyne molecule with other ligands. The reactions of the unsubstituted cyclopentadienyl complexes [Cp₂Zr(THF)(η²-Me₃SiC₂SiMe₃)] (1) and [Cp₂Ti(η²-Me₃SiC₂SiMe₃)] (2) with azobenzene were investigated. In the first case the diazene complex [Cp₂Zr(THF)(N₂Ph₂)] (3) was obtained by alkyne exchange. In the reaction of the titanium complex 2 a NN bond cleavage of azobenzene and a C-H activation of the cyclopentadienyl ligand were observed and the dinuclear imido bridged compound 4 was formed. This mixed valence complex is bridged additionally by a cyclopentadienyl ligand in a η¹:η⁵-coordination mode which is very unusual for titanium complexes. The molecular structures of both compounds were confirmed by X-ray crystallography and compared to former structural data shown in literature.     

Reactions of ‘GaI’ with organometallic transition metal halides

Two approaches towards the synthesis of phosphine ligated half-sandwich complexes [(η^x-C_xH_x)M(PR₃)₂GaI₂]_n containing diiodogallyl ligands have been investigated. Insertion of ‘GaI’ into the Mo-I bond of (η⁷-C₇H₇)Mo(CO)₂I has been shown to yield the crystallographically characterized dimeric complex [(η⁷-C₇H₇)Mo(CO)₂GaI₂]₂ (2). Attempts to substitute the carbonyl ligands by the phosphine ligand dppe [dppe = bis(diphenylphosphino)ethane] have been shown instead to yield the sparingly soluble complex [(η⁷-C₇H₇)Mo(CO)₂GaI₂]₂(μ-dppe) (3) in which the phosphine bridges two [(η⁷-C₇H₇)Mo(CO)₂GaI₂] units via a pair of P → Ga donor/acceptor bonds. By contrast, attempts to insert ‘GaI’ directly into the metal-halogen bond of phosphine ligated complexes such as (η⁵-C₅H₅)Ru(PPh₃)₂Cl or (η⁵-C₅H₅)Ru(dppe)Cl have been shown to result in the formation of the tetraiodogallate species(η⁵-C₅H₅)Ru(PPh₃)₂(μ-I)GaI₃ (5) and [(η⁵-C₅H₅)Ru(dppe)]⁺[GaI₄]⁻ (7).     

Synthesis and X-ray structure of the new Mo diselenido complex with hydrotris(pyrazolyl)borate coligand [Et4N][TpMo(CO)2(η-Se2)]

Reaction of the Mo(0) complex [Et₄N][TpMo(CO)₃] (Tp = hydrotris(pyrazol-1-yl)borate) with red Se in MeCN at 50 °C afforded the Mo(II) diselenido complex [Et₄N][TpMo(CO)₂(η²-Se₂)] (2), whose structure has been determined in detail by the single-crystal X-ray diffraction. By treatment with MeOSO₂CF₃ in MeCN, 2 was converted into the selenido-bridged dimolybdenum complex [{TpMo(CO)₂}₂(μ-Se)] with concomitant formation of MeSeSeMe.     

Ligand redox non-innocent behaviour in ruthenium complexes of ethynyl tolans

A small series of half-sandwich bis(phosphine) ruthenium acetylide complexes [Ru(CCC₆H₄CCSiMe₃)(L₂)Cp′] and [Ru(CCC₆H₄CCC₆H₄R-4)(L₂)Cp′] (R = OMe, Me, CO₂Me, NO₂; L₂ = (PPh₃)₂, Cp′ = Cp; L₂ = dppe; Cp′ = Cp^∗) have been synthesised. One-electron oxidations of these complexes gave the corresponding radical cations, which were significantly more chemically stable in the case of the Ru(dppe)Cp^∗ derivatives. The representative complex [Ru(CCC₆H₄CCC₆H₄OMe-4)(dppe)Cp^∗] was further examined by spectroelectrochemical (IR and UV-Vis-NIR) methods. The results of the spectroelectrochemical studies, supported by DFT calculations, indicate that the hole is largely supported by the ‘RuCCC₆H₄’ moiety in a manner similar to that described previously for simple aryl ethynyl complexes, rather than being more extensively delocalized along the entire conjugated ligand.     

Bis(cyclopentadienyl) zirconium(IV) amides as possible precursors for low pressure CVD and plasma-enhanced ALD

Low pressure chemical vapour deposition (LPCVD) of [ZrCp₂(NMe₂)₂] (1), [ZrCp₂(η²-MeNCH₂CH₂NMe)] (2), [ZrCp′₂(NMe₂)₂] (3) and [ZrCp′₂(NEt₂)₂] (4) (Cp = η⁵-cyclopentadienyl, Cp′ = η⁵-monomethylcyclopentadienyl), onto glass substrates at 600 °C, afforded highly reflective and adhesive films of zirconium carbide and amorphous carbon. Powder XRD indicated that the films were largely amorphous, although small, broad peaks accounting for ZrC and ZrO₂ were present, suggesting that the remaining carbon was due to amorphous deposits from the cyclopentadienyl ligands. SEM images showed an island-growth mechanism with distinct crevices between the concentric nodules. Plasma-enhanced atomic layer deposition (PEALD) of compounds 1 and 2 showed that the precursors were not sufficiently stable or volatile to give a good rate of film growth.     

Synthesis, reactivities and catalytic carbonylation of rhodium(I) carbonyl complexes containing isomeric acetylpyridine ligands

[Rh(CO)₂Cl]₂ reacts with two mole equivalent of 2-acetylpyridine (a), 3-acetylpyridine (b) and 4-acetylpyridine (c) to afford chelate [Rh(CO)Cl(η²-N∩O)] (1a) and non-chelate [Rh(CO)₂Cl(η¹-N∼O)] (1b, 1c) complexes, where, N∩O = a, N∼O = b, c. Oxidative addition (OA) of 1a-1c with CH₃I and C₂H₅I yields penta coordinate rhodium(III) complexes, [Rh(COR)ClI(η²-N∩O)] {R = -CH₃ (2a); -C₂H₅ (3a)} and [Rh(COR)(CO)ClI(η¹-N∼O)] {R = -CH₃ (2b, 2c); -C₂H₅ (3b, 3c)}. Kinetic study for the reaction of 1a-1c with CH₃I indicates a pseudo-first order reaction. The catalytic activity of 1a-1c for the carbonylation of methanol to acetic acid and its ester was evaluated at different initial CO pressures 5, 10 and 20 bar at ∼25 °C and higher turn over numbers (TON = 1581-1654) were obtained compared to commercial Monsanto’s species [Rh(CO)₂I₂]⁻ (TON = 1000) under the reaction conditions: temperature = 130 ± 1 °C, pressure = 15-32 bar, rpm = 450, time = 1 h and catalyst: substrate = 1: 1900.     

Neighbouring metal induced oxidative addition at the iron centre amongst the iron-arylpyridylphosphine complexes

Complexes of the type (η⁴-BuC₅H₅)Fe(CO)₂(P) (P = PPh₂Py 3, PPhPy₂4, PPy₃5; Py = 2-pyridyl) were satisfactorily prepared. Upon treatment of 3 with M(CO)₃(EtCN)₃ (M = Mo, 6a; W, 6b), the pyridyl N-atom could be coordinated to the metal M, which then eliminates a CO ligand from the Fe-centre and induced an oxidative addition of the endo-C-H of (η⁴-BuC₅H₅). This results in a bridged hydrido heterodimetallic complex [(η⁵-BuC₅H₄)Fe(CO)(μ-P,N-PPh₂Py)(μ-H)M(CO)₄] (M = Mo, 7a, 81%; W, 7b, 76%). The reaction of 4 or 5 with 6a,b did not give the induced oxidative addition, although these complexes contain more than one pyridyl N-atom. The reaction of 4 with M(CO)₄(EtCN)₂ (M = Mo, 9a; W, 9b) produced heterodimetallic complexes [(η⁴-BuC₅H₅)Fe(CO)₂(μ-P:N,N′-PPhPy₂)M(CO)₄] (M = Mo, 10a, 81%; W, 10b, 83%). Treatment of 5 with 6a,b gave [(η⁴-BuC₅H₅)Fe(CO)₂(μ-P:N,N′,N″-PPy₃)M(CO)₃] (M = Mo, 12a, 96%; W, 12b, 78%).     

(C5Me5)2NbBH4, a new reagent for the synthesis of Ru and Co carbonyl clusters with interstitial boron or carbon

The reaction of Cp*₂NbBH₄ (Cp* = η⁵-C₅Me₅) with Ru₃(CO)₁₂ gave a mixture of compounds, from which only [Cp*₂Nb(CO)₂]₂[Ru₆(CO)₁₆C] (1) could be characterized by spectroscopic and crystallographic methods. ¹¹B NMR spectroscopy proved that interstitial boron may be present in other Ru₆ clusters, but these compounds did not crystallize. The reaction of Cp*₂NbBH₄ with Co₂(CO)₈ gave among others the salts [Cp*₂Nb(CO)₂]₂[Co₆(CO)₁₅C] (4) and [Cp*₂Nb(CO)₂]₃[Co₁₃(CO)₂₄C₂] (5), which were examined by X-ray diffraction studies. The true nature of the interstitial atoms in 5 was deduced from electrochemical investigations, which reveal similar redox properties as for the already known [Co₁₃(CO)₂₄C₂]³⁻ anion.     

Synthesis and structural investigation of vanadocene(IV) complexes of non-linear pseudohalides

Two series of vanadocene complexes of the type (Cp′ = η⁵-C₅H₅, η⁵-C₅H₄Me; X = dicyanamide, tricyanomethanide, dicyanonitrosomethanide) were prepared by the reaction of appropriate vanadocene dichloride complex with alkali salt of non-linear pseudohalide. The bonding mode of pseudohalide ligands was determined by spectroscopic measurements and X-ray diffraction analyses.     

[60]Fullerene displacement from fac-(dihapto-[60]fullerene)(dihapto-1,2-bis-(1,10-phenanthroline) tricarbonyl tungsten(0)

The Lewis bases triphenyl phosphine and tricyclohexyl phosphine (L) displace [60]fullerene (C₆₀) from fac-(η²-C₆₀)(η²-phen)W(CO)₃ (phen=1,10-phenanthroline) to produce fac-(η²-phen)(η¹-L)W(CO)₃. Under flooding conditions, the reactions were first order with respect to fac-(η²-C₆₀)(η²-phen)W(CO)₃. The order with respect to C₆₀ and L depends on the reaction conditions i.e., whether [C₆₀]/[L] ≈ 0 or 0?It [C₆₀]/[L] ≈ 1. Two limiting cases of an interchange displacement of [60]fullerene from fac-(η²-C₆₀)(η²-phen)W(CO)₃, whose relative contributions to the overall mechanism depend on the nature of the solvent, are proposed based on the rate law and on the activation parameters. The mechanism involves an initial [60]fullerene dissociation to produce (i) the electronically unsaturated intermediate (η²-phen)W(CO)₃ for the dissociative displacement and (ii) the solvated intermediate fac-(solvent)(η²-phen)W(CO)₃ for the solvent-assisted [60]fullerene dissociation. The W-C₆₀ bond energy in fac-(η²-C₆₀)(η²-phen)W(CO)₃ was estimated to be in the vicinity of 105 kJ/mol based on the enthalpy of activation of the step where presumably [60]fullerene dissociates from fac-(η²-C₆₀)(η²-phen)W(CO)₃ to produce (η²-phen)W(CO)₃.     

An unsaturated half-sandwich ruthenium(II) complex containing a dithioimidodiphosphinate ligand

Treatment of [Cp*RuCl₂]_x (Cp* = η⁵-C₅Me₅) with K[N(Ph₂PS)₂] afforded [Cp*Ru{N(Ph₂PS)₂}Cl] (1). Reduction of 1 with Li[BEt₃H] gave the 16-electron half-sandwich Ru(II) complex [Cp*Ru{N(Ph₂PS)₂}] (2). Complexes 1 and 2 have been characterized by X-ray crystallography. The Ru-Cp*(centroid) and average Ru-S distances in 1 are 1.827 and 2.3833(5) Å, respectively. The corresponding bond distances in 2 are 1.739 and 2.379(1) Å. Treatment of 2 with 2-electron ligands L afforded the adducts [Cp*Ru{N(Ph₂PS)₂}L] (L = CO (3), 2,6-Me₂C₆H₄NC (4), MeCO₂CCCO₂Me (5)). Oxidation of 2 with tetramethylthiuram disulfide gave the Ru(IV) complex [Cp*Ru{S₂CNMe₂}₂][N(Ph₂PS)₂] (6). The Ru-Cp*(centroid) and average Ru-S distances in 6 are 1.897 and 2.387(1) Å, respectively.     

The electronic structure of the electron-reservoir complex CpFe(hexamethylbenzene) revisited: a regular metal-centered SOMO

While all the available experimental and theoretical data on 19-electron electron reservoir complexes of the general type (η⁵-C₅R₅)Fe(η⁶-arene) (R = H, Me) agree for a SOMO participation of Fe being larger than that of the Cp and arene ligands, recent DFT calculations disagree on only one compound, namely CpFe(HMB) (HMB = hexamethylbenzene). The reported calculations show clearly that CpFe(HMB) is not an exception and has iron-based SOMO, like all the members of the (η⁵-C₅R₅)Fe(η⁶-arene) (R = H, Me) family.     

The synthesis, structure, reactivity and electrochemical properties of ruthenium complexes featuring cyanoacetylide ligands

The complex [Ru(CCCN)(dppe)Cp*] (1) is readily obtained (ca. 70%) from the sequential reaction of [Ru(CCH₂)(dppe)Cp*]PF₆ with ⁿBuLi and phenyl cyanate. The complex behaves as a typical transition metal acetylide upon reaction with tetracyanoethene, affording a metallated pentacyanobutadiene. Complex 1 is a useful metalloligand, and its reactions with [W(thf)(CO)₅], [RuCl(PPh₃)₂Cp], [RuCl(dppe)Cp*] or cis-[RuCl₂(dppe)₂] all afforded products featuring the M-CCCN-M′ motif, for which ground state structures indicate a degree of polarisation. Electrochemical and spectroelectrochemical studies reveal moderate interactions between the metal centres in the 35-electron dications [{Cp*(dppe)Ru}(μ-CCCN){RuL₂Cp′}]²⁺ (RuL₂Cp′ = Ru(PPh₃)₂Cp, Ru(dppe)Cp*).