Neighbouring metal induced oxidative addition at the iron centre amongst the iron-arylpyridylphosphine complexes

Complexes of the type (η⁴-BuC₅H₅)Fe(CO)₂(P) (P = PPh₂Py 3, PPhPy₂4, PPy₃5; Py = 2-pyridyl) were satisfactorily prepared. Upon treatment of 3 with M(CO)₃(EtCN)₃ (M = Mo, 6a; W, 6b), the pyridyl N-atom could be coordinated to the metal M, which then eliminates a CO ligand from the Fe-centre and induced an oxidative addition of the endo-C-H of (η⁴-BuC₅H₅). This results in a bridged hydrido heterodimetallic complex [(η⁵-BuC₅H₄)Fe(CO)(μ-P,N-PPh₂Py)(μ-H)M(CO)₄] (M = Mo, 7a, 81%; W, 7b, 76%). The reaction of 4 or 5 with 6a,b did not give the induced oxidative addition, although these complexes contain more than one pyridyl N-atom. The reaction of 4 with M(CO)₄(EtCN)₂ (M = Mo, 9a; W, 9b) produced heterodimetallic complexes [(η⁴-BuC₅H₅)Fe(CO)₂(μ-P:N,N′-PPhPy₂)M(CO)₄] (M = Mo, 10a, 81%; W, 10b, 83%). Treatment of 5 with 6a,b gave [(η⁴-BuC₅H₅)Fe(CO)₂(μ-P:N,N′,N″-PPy₃)M(CO)₃] (M = Mo, 12a, 96%; W, 12b, 78%).     

Synthesis and characterisation of a series of 1,2-phenylenedioxoborylcyclopentadienyl-metal complexes [Ti(IV), Zr(IV), Hf(IV), La(III), Ce(III), Yb(III), Sn(II) and Fe(II)]

The preparation of a series of 1,2-phenylenedioxoborylcyclopentadienyl-metal complexes is described. These are of formula [M{η⁵-C₅H₄(BX)}Cl₃] [M = Ti and X = CAT (2a), CAT^t (2b) or CAT^tt (2c); X = CAT^tt and M = Zr (4a) or Hf (4b)], [M{η⁵-C₅H₄(BX)}₂Cl₂] [M = Zr, X = CAT (3a) or CAT^t (3c); or M = Hf, X = CAT (3b) or CAT^t (3d)], [M{(μ-η⁵-C₅H₃BCAT)₂ SiMe₂}Cl₂] [M = Zr (5a) or Hf (5b)], [M{η⁵-C₅H₃(BCAT)₂}Cl₃] [M = Zr (6a) or Hf (6b)], [M{η⁵-C₅H₄BCAT}₃(THF)] [M = La (7a), Ce (7b) or Yb (7c)], [Sn{η⁵-C₅ H₄(BCAT^t)}Cl](8) and [Fe{η⁵-C₅H₄(BCAT^t)}₂] (9). The abbreviations refer to BO₂C₆H₄-1,2 (BCAT) and the 4-Bu^t (BCAT^t) and the (BCAT^tt) analogues. The compounds 2a-9 have been characterised by microanalysis, multinuclear NMR and mass spectra. The single crystal X-ray structure of the lanthanum compound 7a is presented.     

Synthesis, reactivities and catalytic carbonylation of rhodium(I) carbonyl complexes containing isomeric acetylpyridine ligands

[Rh(CO)₂Cl]₂ reacts with two mole equivalent of 2-acetylpyridine (a), 3-acetylpyridine (b) and 4-acetylpyridine (c) to afford chelate [Rh(CO)Cl(η²-N∩O)] (1a) and non-chelate [Rh(CO)₂Cl(η¹-N∼O)] (1b, 1c) complexes, where, N∩O = a, N∼O = b, c. Oxidative addition (OA) of 1a-1c with CH₃I and C₂H₅I yields penta coordinate rhodium(III) complexes, [Rh(COR)ClI(η²-N∩O)] {R = -CH₃ (2a); -C₂H₅ (3a)} and [Rh(COR)(CO)ClI(η¹-N∼O)] {R = -CH₃ (2b, 2c); -C₂H₅ (3b, 3c)}. Kinetic study for the reaction of 1a-1c with CH₃I indicates a pseudo-first order reaction. The catalytic activity of 1a-1c for the carbonylation of methanol to acetic acid and its ester was evaluated at different initial CO pressures 5, 10 and 20 bar at ∼25 °C and higher turn over numbers (TON = 1581-1654) were obtained compared to commercial Monsanto’s species [Rh(CO)₂I₂]⁻ (TON = 1000) under the reaction conditions: temperature = 130 ± 1 °C, pressure = 15-32 bar, rpm = 450, time = 1 h and catalyst: substrate = 1: 1900.     

Synthesis and electrochemical aspects of group 14 iron complexes of the type (η-C5H5)Fe(L)2ER3, L2 = (CO)2, (Ph2P)2CH2; E = C, Si, Ge, Sn

The dicarbonyl and diphosphine complexes of the type (η⁵-C₅H₅)Fe(L)₂ER₃ (L₂ = (CO)₂ (a), (Ph₂P)₂CH₂ (b); ER₃ = CH₃ (1a/b); SiMe₃ (2a/b), GeMe₃ (3a/b), SnMe₃ (4a/b)) were synthesized and studied electrochemically. Cyclic voltammetric studies on the dicarbonyl complexes 1a-4a revealed one electron irreversible oxidation processes whereas the same processes for the chelating phosphine series 1b-4b were reversible. The E_ox values found for the series 1a-4a were in the narrow range 1.3-1.5 V and in the order Si > Sn ≈ Ge > C; those for 1b-4b (involving replacement of the excellent retrodative π-accepting CO ligands by the superior σ-donor and poorer π-accepting phosphines) have much lower oxidation potentials in the sequence Sn > Si ≈ Ge > C. This latter oxidation potential pattern relates directly to the solution ³¹P NMR chemical shift data illustrating that stronger donation lowers the E_ox for the complexes; however, simple understanding of the trend must await the results of a current DFT analysis of the systems.     

Synthesis, characterization and electrochemistry of bis(3-aryl-6,6-dimethylcyclohexadienyl)ruthenium complexes

Five bis(3-aryl-6,6-dimethylcyclohexadienyl)ruthenium complexes (4a-4e) are prepared by reactions between di-μ-chlorodichlorobis[(1-3η:6-8η)-2,7-dimethyl-octadienyl]diruthenium and the corresponding dienes. The larger aryl substituents increase the barrier to rotation in 4a-4e relative to bis(3-methyl-6,6-cyclohexadienyl)ruthenium (5b). The activation parameters were determined by line-shape analysis for the exchange process in 4a: ΔG^† (183 K), 8.0 ± 0.2 kcal/mol; ΔH^†, 10.3 kcal/mol; and ΔS^†, 13 cal/mol/K. The electronic effect of the aryl substituents on the cyclohexadienyl ligand on the oxidation potential of the complex are compared to the effect of methyl substituents.     

Functional mimics of catechol oxidase by mononuclear copper complexes of sterically demanding [NNO] ligands

Several mononuclear copper complexes 1(a-b) and 2(a-b) supported over sterically demanding [NNO] ligands namely, N-(aryl)-2-[(pyridin-2-ylmethyl)amino]acetamide [aryl = 2,6-diethylphenyl (1) and mesityl (2)], exhibit catecholase-like activity in performing the aerial oxidation of 3,5-di-t-butylcatehol (3,5-DTBC) to 3,5-di-t-butyl-catequinone (3,5-DTBQ) under ambient conditions. The 1(a-b) and 2(a-b) complexes were directly synthesized from the reaction of the respective ligands 1-2 with CuX₂·nH₂O (X = Cl, NO₃, n = 2, 3) in 55-85% yield. Mechanistic insights on the catalytic cycle as obtained by density functional theory studies for a representative complex 1a suggest that an intramolecular hydrogen transfer, from a catechol-OH moiety to a copper bound superoxo moiety, form the rate-determining step of the oxidation process, displaying an activation barrier of 18.3 kcal/mol (ΔG^‡) [6.9 kcal/mol in Δ(PE + ZPE)^‡ scale].     

[S2], [S3], and [N3] coordination modes of hydrotris(thioxotriazolyl)borato. Zinc, nickel, cobalt, and bismuth complexes

The ligand hydrotris(1,4-dihydro-3-methyl-4-phenyl-5-thioxo-1,2,4-triazolyl)borato (Tr^Ph,Me) was synthetized as natrium salt and the complexes [Zn(Tr^Ph,Me)₂] · 7.5H₂O · 1.5CH₃CN (2a), [Zn(Tr^Ph,Me)₂] · 8DMF (2b), [Co(Tr^Ph,Me)₂] · 8DMF (3a), [Ni(Tr^Ph,Me)₂] · H₂O · 6DMSO (4a), [Bi(Tr^Ph,Me)₂]NO₃ (5), have been isolated and structurally characterized by X-ray diffraction. In the zinc derivatives the ligand adopts different denticity and coordination modes, η² and [S₂] for 2a and η³ and [N₃] for 2b, depending on the crystallization solvent, giving rise to tetrahedral and octahedral geometry, respectively. In the octahedral cobalt and nickel complexes the ligand is η³ and [N₃] coordinated whereas in the bismuth complex the η³ and [S₃] coordination is exhibited.     

A new series of iodocarbonyl ruthenium (II) complexes with unsymmetrical phosphine-phosphine sulfide ligands of the type Ph2P(CH2)nP(S)Ph2, n = 1-4: Isolation and structural investigation

Hexa-coordinated chelate complex cis-[Ru(CO)₂I₂(P∩S)] (1a) {P∩S = η²-(P,S)-coordinated} and penta-coordinated non-chelate complexes cis-[Ru(CO)₂I₂(P∼S)] (1b-d) {P∼S = η¹-(P)-coordinated} are produced by the reaction of polymeric [Ru(CO)₂I₂]_n with equimolar quantity of the ligands Ph₂P(CH₂)_nP(S)Ph₂ {n = 1(a), 2(b), 3(c), 4(d)} in dichloromethane at room temperature. The bidentate nature of the ligand a in the complex 1a leads to the formation of five-membered chelate ring which confers extra stability to the complex. On the other hand, 1:2 (Ru:L) molar ratio reaction affords the hexa-coordinated non-chelate complexes cis,cis,trans-[Ru(CO)₂I₂(P∼S)₂] (2a-d) irrespective of the ligands. All the complexes show two equally intense terminal ν(CO) bands in the range 2028-2103 cm⁻¹. The ν(PS) band of complex 1a occurs 23 cm⁻¹ lower region compared to the corresponding free ligand suggesting chelation via metal-sulfur bond formation. X-ray crystallography reveals that the Ru(II) atom occupies the center of a slightly distorted octahedral geometry. The complexes have also been characterized by elemental analysis, ¹H, ¹³C and ³¹P NMR spectroscopy.     

Diheteroarylmethyl substituted titanocenes: A novel class of possible anti-cancer drugs

From the reaction of tert-butyl lithium or n-butyl lithium with N-methylpyrrole (1a), furan (1b) or 2-bromo-thiophen (1c), 2-N-methylpyrrolyl lithium (2a), 2-furyl lithium (2b) or 2-thiophenyl lithium (2c), respectively, was obtained. When reacted with 6-(2-N-methylpyrrolyl) fulvene (3a), 6-(2-furyl) fulvene (3b) or 6-(2-thiophenyl) fulvene (3c), the corresponding lithiated intermediates were formed (4a-c). Titanocenes (5a-c) were obtained through transmetallation with titanium tetrachloride. When these titanocenes were tested against pig kidney epithelial (LLC-PK) cells, inhibitory concentrations (IC₅₀) of 32 μM, 140 μM, and 240 μM, respectively, were observed. These values represent improved cytotoxicity against LLC-PK, compared to their ansa-analogues.     

Lewis-base copper(I) formates: Synthesis, reaction chemistry, structural characterization and their use as spin-coating precursors for copper deposition

Consecutive synthesis methodologies for the preparation of a series of copper(I) formates [L_mCuO₂CH] (L = ⁿBu₃P: 4a, m = 1; 4b, m = 2; 5, L = [Ti](CCSiMe₃)₂, m = 1, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti) and [L_mCuO₂CH·HO₂CR] (L = ⁿBu₃P: 7a, m = 1, R = H; 7b, m = 2, R = H; 7c, m = 2, R = Me; 7d, m = 2, R = CF₃; 7e, m = 2, R = Ph. L = (^cC₆H₁₁)₃P, R = H: 8a, m = 2; 8b, m = 3. L = (CF₃CH₂O)₃P, R = H: 9a, m = 2; 9b, m = 3. L = (CH₃CH₂O)₃P, R = H: 10a, m = 2; 10b, m = 3. L = [Ti](CCSiMe₃)₂; m = 1: 11a, R = H; 11b, R = Ph) is reported using [CuO₂CH] (1) and L (2a, L = ⁿBu₃P; 2b, L (^cC₆H₁₁)₃P; 2c, L = (CF₃CH₂O)₃P; 2d, L = (CH₃CH₂O)₃P; 3, L = [Ti](CCSiMe₃)₂) as key starting materials. Addition of formic acid (6a) or carboxylic acid HO₂CR (6b, R = Me; 6c, R = CF₃; 6d, R = Ph) to the afore itemized copper(I) formates 4 and 5 gave metal-organic or organometallic 7-11. The molecular structures of 8a and 11a in the solid state are reported showing a threefold coordinated copper(I) ion, setup by either two coordinatively-bonded phosphorus atoms and one formate oxygen atom (8a) or two π-bonded alkyne ligands and one oxygen atom (11a). A formic acid molecule is additionally hydrogen-bonded to the CuO₂CH moiety. The use of 7b as suitable precursor for the deposition of copper onto TiN-coated oxidized silicon wafers by the spin-coating process below 300 °C is described. Complex 7b offers an appropriate transformation behavior into metal phase by an elimination-decarboxylation mechanism. The morphology of the copper films strongly depends on the annealing conditions. A closed grain network densified by a post-treatment is obtained (8 °C min⁻¹, N₂/H₂ carrier gas). Hydrogen post-anneal to 420 °C after film deposition gave a copper film showing resistivities from 2.5 to 3.7 μΩ cm. This precursor was also used for gap-filling processes.     

The influence of substituents (R) at N atom of thiophene-2-carbaldehyde thiosemicarbazones {(C4H3S)HCN-N(H)-C(S)NHR} on bonding, nuclearity and H-bonded networks of copper(I) complexes

The nuclearity, bonding and H-bonded networks of copper(I) halide complexes with thiophene-2-carbaldehyde thiosemicarbazones {(C₄H₃S)HC²N³-N(H)-C¹(S)N¹HR} are influenced by R substituents at N¹ atom. Thiophene-2-carbaldehyde-N¹-methyl thiosemicarbazone (HttscMe) or thiophene-2-carbaldehyde-N¹-ethyl thiosemicarbazone (HttscEt) have yielded halogen-bridged dinuclear complexes, [Cu₂(μ-X)₂(η¹-S-Htsc)₂(Ph₃P)₂] (Htsc, X: HttscMe, I, 1; Br, 2; Cl, 3; HttscEt, I, 4; Br, 5; Cl, 6), while thiophene-2-carbaldehyde-N¹-phenyl thiosemicarbazone (HttscPh) has yielded mononuclear complexes, [CuX(η¹-S-HttscPh)₂] (X, I, 7a; Br 8; Cl, 9) and a sulfur bridged dinuclear complex, [Cu₂(μ-S-HttscPh)₂(η¹-S-HttscPh)₂I₂] 7b co-existing with 7a in the same unit cell. These results are in contrast to S-bridged dimers [Cu₂(μ-S-Httsc)₂(η¹-Br)₂(Ph₃P)₂] · 2H₂O and [Cu₂(μ-S-Httsc)₂(η¹-Cl)₂(Ph₃P)₂] · 2CH₃CN obtained for R = H and X = Cl, Br (Httsc = thiophene-2-carbaldehyde thiosemicarbazone) as reported earlier. The intermolecular CH_Ph?π interaction in 1-3 (2.797 Å, 1; 3.264 Å, 2; 3.257 Å, 3) have formed linear polymers, whereas the CH_Ph?X and N³?HCH interactions in 4-6 (2.791, 2.69 Å, 5; 2.776, 2.745 Å, 6, respectively) have led to the formation of H-bonded 2D polymer. The PhN¹H?π, interactions (2.547 Å, 8, 2.599 Å, 9) have formed H-bonded dimers only. The Cu?Cu separations are 3.221-3.404 Å (1-6).     

Sterically crowded triazenides as novel ancillary ligands in copper chemistry

We have synthesized copper salts MN₃RR′ derived from the biphenyl- or m-terphenyl-substituted triazenes Tph₂N₃H (1a) and Dmp(Tph)N₃H (1b) (Dmp = 2,6-Mes₂C₆H₃ with Mes = 2,4,6-Me₃C₆H₂; Tph = 2-TripC₆H₄ with Trip = 2,4,6-i-Pr₃C₆H₂). The homoleptic copper triazenide [CuN₃Tph₂] (2a) was obtained in high yield from the metallation of 1a with mesityl copper in n-heptane, while the complex [CuN₃(Dmp)Tph] (2b) was generated by the same method in situ only. Reaction of 2a with triphenylphosphane gave the 2:1 adduct [CuN₃Tph₂(PPh₃)₂] (3a), regardless of the used complex/donor ratio, while reaction of 2a or 2b with a stochiometric amount of t-butylisonitrile afforded the 1:1 adducts [Tph₂N₃CuCNtBu] (4a) and [Dmp(Tph)N₃CuCNtBu] (4b). All new compounds (except 2b) have been characterized by ¹H NMR, ¹³C NMR and IR spectroscopy, elemental analysis, melting point (not 2a), and X-ray crystallography. The IR spectroscopic examination of the ν(CN) stretch in the isonitrile adducts 4a and 4b revealed the weaker donor character of the supporting triazenido ligands compared to related β-diketiminato ligands.     

Polymorphism and weak antiferromagnetic interactions in dibromo[(−)-sparteine-N,N]copper(II)

Two polymorphic crystal structures of the title compound, dibromo[(−)-sparteine-N,N^′]copper(II), 1, were determined. The structures of two isomorphs of 1, 1a [orthorhombic, P2₁2₁2₁, a=11.0463(9) Å, b=11.9839(15) Å and c=12.7835(19) Å] and 1b [orthorhombic, P2₁2₁2₁, a=7.6779(9) Å, b=12.0927(14) Å and c=18.090(2) Å], are composed of the same basic structural unit, Cu(C₁₅H₂₆N₂)Br₂. The bond distances in the molecular structures of 1a and 1b are identical to each other within the esds. However, there are slight differences in the bond angles around the Cu(II) center and considerable differences in their packing structure. Crystal 1a exhibits weak anti-ferromagnetism (J=−1.89 cm⁻¹) as opposed to the magnetically isolated paramagnetism observed for the analogous dichloro[(−)-sparteine]copper(II), 2. The results of a magneto-structural investigation of 1a and 2, and other supporting evidence, suggest that the pathway for the weak antiferromagnetic super-exchange in 1a might be through a Cu-Br ? Br-Cu contact.     

Hydrogen-halide versus alkyl-halide oxidative addition in dimethyl platinum(II) complexes: Crystal structure of [PtBr2(bpy)]

Dimethyl platinum(II) complexes [PtMe₂(NN)] {NN = bu₂bpy (4,4′-di-tert-butyl-2,2′-bipyridine) (1a), bpy (2,2′-bipyridine) (1b), phen (1,10-phenanthroline) (1c)} reacted with commercial 3-bromo-1-propanol in the presence of 1,3-propylene oxide to afford cis, trans- [PtBrMe₂{(CH₂)₃OH}(NN)] (NN = bu₂bpy (2a), bpy (2b), phen (2c)). On the other hand, [PtMe₂(NN)] (1a)-(1b) reacted with the trace of HBr in commercial 3-bromo-1-propanol to give [PtBr₂(NN)] (NN = bu₂bpy (3a), bpy (3b)). The reaction pathways were monitored by ¹H NMR at various temperatures. Treatment of 1a-1b with a large excess of 3-bromo-1-propanol at −80 °C gave the corresponding methyl(hydrido)platinum(IV) complexes [PtBr(H)Me₂(NN)] (NN = bu₂bpy (4a), bpy (4b)) via the oxidative addition of dimethyl platinum(II) complexes with HBr. The complexes [PtBr(H)Me₂(NN)] decomposed by reductive elimination of methane above −20 °C for bu₂bpy and from −20 to 0 °C for bpy analogue to give methane and platinum(II) complexes [PtBrMe(NN)] (5a)-(5b) and then decomposed at about 0 °C to yield [PtBr₂(NN)] and methane. When the reactions were performed at a molar ratio of Pt:RX/1:10, the corresponding complexes [PtBrMe(NN)] (5a)-(5b) were also obtained. The crystal structure of the complex 3b shows that platinum adopts square planar geometry with a twofold axis through the platinum atom. The Pt…Pt distance (5.164 Å) is considerably larger than the interplanar spacing (3.400 Å) and there is no platinum-platinum interaction.     

2-N-(Quinoline-8-yl)iminomethylphenolate - A (ONN)-tridentate ligand system in silicon complex chemistry

Condensation of salicylic aldehyde with 8-aminoquinoline afforded (ONN)-tridentate ligand 2-N-(quinoline-8-yl)iminomethylphenol (1), which was obtained as a crystalline solid for the first time and characterized by X-ray diffraction. Reaction between 1 and phenyltrichlorosilane in the presence of triethylamine results in the formation of the 1:1 chelate complex dichloro-[2-N-(quinoline-8-yl)imino-methylphenolato]-phenylsilane (2a) bearing a hexacoordinate silicon atom. The crystal structure of 2a^∗CHCl₃ reveals a rare coordination pattern: Although carrying two chlorine atoms, the hexacoordinate Si atom coordinates the tridentate ligand’s imine N atom in the trans position to the phenyl group. Silylation of 1 with hexamethyldisilazane and synthesis of dichloro-[2-N-(quinoline-8-yl)iminomethylphenolato]-methylsilane (2b) yielded few crystals of [2-N-(quinoline-8-yl)iminomethylphenolato]-salicylaldiminato-methylsiliconium chloride (2b′) as byproduct. 2b′ is the first structurally characterized main group element complex of salicylaldimine. This bidentate ligand exhibits an unusually strong N → Si coordination.     

Stereosensitive formation and interconversion of sulfur-bridged cobalt(III)-mercury(II) polynuclear complexes with d- and/or l-penicillaminates

The reaction of trans(N)-[Co(d-pen)₂]⁻ (pen = penicillaminate) with HgCl₂ or HgBr₂ in the molar ratios of 1:1 gave the sulfur-bridged heterodinuclear complex, [HgX(OH₂){Co(d-pen)₂}] (X = Cl (1a) or Br (1b)). A similar reaction in the ratio of 2:1 produced the trinuclear complex, [Hg{Co(d-pen)₂}₂] (1c). The enantiomers of 1a and 1c, [HgCl(OH₂){Co(l-pen)₂}] (1a′) and [Hg{Co(l-pen)₂}₂] (1c′), were also obtained by using trans(N)-[Co(l-pen)₂]⁻ instead of trans(N)-[Co(d-pen)₂]⁻. Further, the reaction of cis · cis · cis-[Co(d-pen)(l-pen)]⁻ with HgCl₂ in the molar ratio of 1:1 resulted in the formation of [HgCl(OH₂){Co(d-pen)(l-pen)}] (2a). During the formations of the above six complexes, 1a, 1b, 1c, 1a′, 1c′, and 2a, the octahedral Co(III) units retain their configurations. On the other hand, the reaction of cis · cis · cis-[Co(d-pen)(l-pen)]⁻ with HgCl₂ in the molar ratio of 2:1 gave not [Hg{Co(d-pen)(l-pen}₂] but [Hg{Co(d-pen)₂}{Co(l-pen)₂}] (2c), accompanied by the ligand-exchange on the terminal Co(III) units. The X-ray crystal structural analyses show that the central Hg(II) atom in 1c takes a considerably distorted tetrahedral geometry, whereas that in 2c is of an ideal tetrahedron. The interconversion between the complexes is also examined. The electronic absorption, CD, and NMR spectral behavior of the complexes is discussed in relation to the crystal structures of 1c and 2c.     

Antisymbiosis. Preferential coordination of anionic oxygen versus neutral sulfur donor atoms of methylsulfanyl- or methylsulfinyl-acetato, 2-benzoato and 2-phenolato to the cis-Pt(PPh3)2 and Pt(dppe) residues

The interaction of an excess of the title ligands L⁻ with the cis-Pt(phos)₂ moieties gives compounds a-bcis-[Pt(L-O)₂(phos)₂] (a, phos = P(Ph)₃; b, phos = 1/2 dppe), in which O- is preferred to S-coordination. Such preference is confirmed by the fact that the same products are obtained by reaction of excess of L⁻ with the previously reported a-d complexes [Pt(L-O,S)(phos)₂]⁺, (c, phos = PPh₃, d, phos = 1/2 dppe), for which chelate ring opening occurs with rupture of Pt-S rather than Pt-O bonds. Compound a can be obtained also by oxidative addition of HL to [Pt(PPh₃)₃]. The Pt-O bonds in compounds a-d are stable towards substitution by Me₂SO, pyridine and tetramethylthiourea. Substitution of L’s occurs with N,N′-diethyldithiocarbamate, which forms a very stable chelate with Pt(II). Thiourea and N,N′-dimethylthiourea also react, because they give rise to cyclometallated products [Pt(phos)₂(NRC(S)NHR)]⁺ (R = H, CH₃), with one ionised thioamido group, as revealed by an X-ray investigation of [Pt(PPh₃)₂(NHC(S)NH₂)]⁺. The preference of O versus S coordination, as well as the stability of the Pt-O bonds, are discussed in terms of antisymbiosis.     

Macrocyclic dinuclear gold(I) and silver(I) NHCs complexes

The ligands bis-(imidazolium) hexafluorophosphate (Himy = -C₃N₂H₃-, imidazolium; R = 1-naphthylmethylene, 1a; 9-anthracenylmethylene, 1b) with an oxoether chain were easily prepared by the reaction of substituted imidazole with the diglycol diiodide, followed by exchange of anions with . 1a and 1b reacted with Ag₂O in DMSO or CH₃CN to yield [2 + 2] dinuclear Ag(I) NHCs macrocyclic complexes 2a and 2b, which showed much different conformation in solid corresponding to the R- substituent. Carbene transmetalation reactions of 2a-b with Au(SMe₂)Cl give dinuclear Au(I) analogs 3a and 3b. The new NHCs complexes were characterized by elemental analyses, ¹H NMR, ¹³C NMR and the structures of 2a-b and 3a were confirmed by X-ray diffraction determination.     

Synthesis and structure of dichloropalladium(II) complexes of heteroleptic N,S- and N,Se-donor ligands based on the 2-organochalcogenomethylpyridine motif, and Mizoroki-Heck catalysis mediated by complexes of N,S-donor ligands

Ligands containing the 2-organochalcogenomethylpyridine motif with substituents in the 4- or 6-position of the pyridyl ring, R⁴,R⁶-pyCH₂ER¹ [R⁴ = R⁶ = H, ER¹ = SMe (1), SeMe (2), SPh (6), SePh (7); R⁴ = Me, R⁶ = H, ER¹ = SMe (3), SPh (8), SePh (9); R⁴ = H, R⁶ = Me, ER¹ = SMe (4), SPh (10), SePh (11); R⁴ = H, R⁶ = Ph, ER¹ = SMe (5), SPh (12), SePh (13)] are obtained on the reaction of R⁴,R⁶-pyMe with LiBuⁿ followed by R¹EER¹. On reaction with PdCl₂(NCMe)₂, the ligands with a 6-phenyl substituent form cyclopalladated species PdCl{6-(o-C₆H₄)pyCH₂ER¹-C,N,E} (5a, 12a, 13a) with the structure of 13a (ER¹ = SePh) confirmed by X-ray crystallography; other ligands form complexes of stoichiometry PdCl₂(R⁴,R⁶-pyCH₂ER¹). Complexes with R⁶ = H are monomeric with N,E-bidentate configurations, confirmed by structural analysis for 3a (R⁴ = Me, ER¹ = SMe), 7a (R⁴ = H, ER¹ = SePh) and 9a (R⁴ = Me, ER¹ = SePh). Two of the 6-methyl substituted complexes examined by X-ray crystallography are oligomeric with trans-PdCl₂(N,E) motifs and bridging ligands, trimeric [PdCl₂(μ-6-MepyCH₂SPh-N,S)]₃ (10a) and dimeric [PdCl₂(μ-6-MepyCH₂SePh-N,Se)]₂ (11a). This behaviour is attributed to avoidance of the Me···Cl interaction that would occur in the cis-bidentate configuration if the pyridyl plane had the same orientation with respect to the coordination plane as observed for 3a, 7a and 9a [dihedral angles 8.0(2)-16.8(2)°]. When examined as precatalysts for the Mizoroki-Heck reaction of n-butyl acrylate with aryl halides in N,N-dimethylacetamide at 120 °C, the complexes exhibit the anticipated trends in yield (ArI > ArBr > ArCl, higher yield for electron withdrawing substituents in 4-RC₆H₄Br and 4-RC₆H₄Cl). The most active precatalysts are PdCl₂(R⁴-pyCH₂SMe-N,S) (R = H (1a), Me (3a)); complexes of the selenium containing ligands exhibit very low activity. For closely related ligands, the changes SMe to SPh, 6-H to 6-Me, and 6-H to 6-Ph lead to lower activity, consistent with involvement of both the pyridyl and chalcogen donors in reactions involving aryl bromides. The precatalyst PdCl₂(pyCH₂SMe-N,S) (1a) exhibits higher activity for the reaction of aryl chlorides in Buⁿ₄NCl at 120 °C as a solvent under non-aqueous ionic liquid (NAIL) conditions.     

Synthesis and reactivity of osmium (VI) nitrido complexes containing pyridine-carboxylato ligands

A series of osmium(VI) nitrido complexes containing pyridine-carboxylato ligands Os^VI(N)(L)₂X (L = pyridine-2carboxylate (1), 2-quinaldinate (2) and X = Cl (a), Br (1b and 2c) or CH₃O (2b)) and [Os^VI(N)(L)X₃]⁻ (L = pyridine-2,6-dicarboxylate (3) and X = Cl (a) or Br (b)) have been synthesised. Complexes 1 and 2 are electrophilic and react readily with various nucleophiles such as phosphine, sulfide and azide. Reaction of Os^VI(N)(L)₂X (1 and 2) with triphenylphosphine produces the osmium(IV) phosphiniminato complexes Os^VI(NPPh₃)(L)₂X (4 and 5). The kinetics of nitrogen atom transfer from the complexes Os^VI(N)(L)₂Br (2c) (L = 2-quinaldinate) with triphenylphosphine have been studied in CH₃CN at 25.0 °C by stopped-flow spectrophotometric method. The following rate law is obtained: −d[Os(VI)]/dt = k₂[Os(VI)][PPh₃]. Os^VI(N)(L)₂Cl (L = 2-quinaldinate) (2a) reacts also with [PPN](N₃) to give an osmium(III) dichloro complex, trans-[PPN][Os^III(L)₂Cl₂] (6). Reaction of Os^VI(N)(L)₂Cl (L = 2-quinaldinate) (2a) with lithium sulfide produces an osmium(II) thionitrosyl complex Os^II(NS)(L)₂Cl (7). These complexes have been structurally characterised by X-ray crystallography.