Antibody characterization using novel ERLIC-MS/MS-based peptide mapping

Electrostatic repulsion hydrophilic interaction chromatography (ERLIC) coupled with mass spectrometry (MS) is a technique that is increasingly being used as a trapping/enrichment tool for glycopeptides/phosphorylated peptides or sample fractionation in proteomics research. Here, we describe a novel ERLIC-MS/MS-based peptide mapping method that was successfully used for the characterization of denosumab, in particular the analysis of sequence coverage, terminal peptides, methionine oxidation, asparagine deamidation and glycopeptides. Compared to reversed phase liquid chromatography (RPLC)-MS/MS methods, ERLIC demonstrated unique advantages in the retention of small peptides, resulting in 100% sequence coverage for both the light and heavy chains. It also demonstrated superior performance in the separation and characterization of asparagine deamidated peptides, which is known to be challenging by RPLC-MS/MS. The developed method can be used alone for peptide mapping-based characterization of monoclonal antibodies, or as an orthogonal method to complement the RPLC-MS/MS method. This study extends the applications of ERLIC from that of a trapping/fractioning column to biologic therapeutics characterization. The ERLIC-MS/MS method can enhance biologic therapeutics analysis with more reliability and confidence for bottom-up peptide mapping-based characterization.     

Direct mass spectrometric characterization of disulfide linkages

Disulfide linkage is critical to protein folding and structural stability. The location of disulfide linkages for antibodies is routinely discovered by comparing the chromatograms of the reduced and non-reduced peptide mapping with location identification confirmed by collision-induced dissociation (CID) mass spectrometry (MS)/MS. However, CID product spectra of disulfide-linked peptides can be difficult to interpret, and provide limited information on the backbone region within the disulfide loop. Here, we applied an electron-transfer dissociation (ETD)/CID combined fragmentation method that identifies the disulfide linkage without intensive LC comparison, and yet maps the disulfide location accurately. The native protein samples were digested using trypsin for proteolysis. The method uses RapiGest SF Surfactant and obviates the need for reduction/alkylation and extensive sample manipulation. An aliquot of the digest was loaded onto a C₄ analytical column. Peptides were gradient-eluted and analyzed using a Thermo Scientific LTQ Orbitrap Elite mass spectrometer for the ETD-triggered CID MS³ Wypych J, Li M, Guo A, Zhang Z, Martinez T, Allen MJ, Fodor S, Kelner DN, Flynn GC, Liu YD, et al. Human IgG2 antibodies display disulfide-mediated structural isoforms. J Biol Chem. 2008;283:16194–205. doi:10.1074/jbc.M709987200. PMID:18339624[Crossref], [PubMed], [Web of Science ®] , [Google Scholar] experiment. Survey MS scans were followed by data-dependent scans consisting of ETD MS² scans on the most intense ion in the survey scan, followed by 5 MS³ CID scans on the 5 most intense ions in the ETD MS² scan. We were able to identify the disulfide-mediated structural variants A and A/B forms and their corresponding disulfide linkages in an immunoglobulin G2 monoclonal antibody with λ light chain (IgG2λ), where the location of cysteine linkages were unambiguously determined.     

Human Dickkopf-1 (huDKK1) protein: characterization of glycosylation and determination of disulfide linkages in the two cysteine-rich domains

Human Dickkopf‐1 (huDKK1), an inhibitor of the canonical Wnt‐signaling pathway that has been implicated in bone metabolism and other diseases, was expressed in engineered Chinese hamster ovary cells and purified. HuDKK1 is biologically active in a TCF/lef‐luciferase reporter gene assay and is able to bind LRP6 coreceptor. In SDS‐PAGE, huDKK1 exhibits molecular weights of 27–28 K and 30 K at ～ 1:9 ratio. By MALDI‐MS analysis, the observed molecular weights of 27.4K and 29.5K indicate that the low molecular weight form may contain O‐linked glycans while the high molecular weight form contains both N‐ and O‐linked glycans. LC‐MS/MS peptide mapping indicates that ～ 92% of huDKK1 is glycosylated at Asn²²⁵ with three N‐linked glycans composed of two biantennary forms with 1 and 2 sialic acid (23% and 60%, respectively), and one triantennary structure with 2 sialic acids (9%). HuDKK1 contains two O‐linked glycans, GalNAc (sialic acid)‐Gal‐sialic acid (65%) and GalNAc‐Gal[sialic acid] (30%), attached at Ser 30 as confirmed by β‐elimination and targeted LC‐MS/MS. The 10 intramolecular disulfide bonds at the N‐ and C‐terminal cysteine‐rich domains were elucidated by analyses including multiple proteolytic digestions, isolation and characterization of disulfide‐containing peptides, and secondary digestion and characterization of selected disulfide‐containing peptides. The five disulfide bonds within the huDKK1 N‐terminal domain are unique to the DKK family proteins; there are no exact matches in disulfide positioning when compared to other known disulfide clusters. The five disulfide bonds assigned in the C‐terminal domain show the expected homology with those found in colipase and other reported disulfide clusters.     

Isolation and characterization of a resistant core peptide of recombinant human granulocyte-macrophage colony-stimulating factor (GM-CSF); confirmation of the GM-CSF amino acid sequence by mass spectrometry.

A trypsin-resistant core peptide of recombinant human granulocyte-macrophage colony-stimulating factor (rhGM-CSF) was isolated and analyzed by high-energy Cs+ liquid secondary-ion (LSI) mass spectrometric analysis. This analysis provided successful detection of the high-mass disulfide-linked core peptide as well as information confirming the existence of disulfide pairing. Similarly, LSI mass spectrometric analysis of the peptide fragments isolated chromatographically from a Staphylococcus aureus V8 protease digest of rhGM-CSF provided rapid confirmation of the cDNA-derived sequence and determination of the existing disulfide bonds between cysteine residues 54-96 and 88-121. Electrospray ionization mass spectrometry was employed to measure the molecular weight of the intact protein and to determine the number of the disulfide bonds in the protein molecule by comparative analysis of the protein before and after reduction with beta-mercaptoethanol.     

A fluorescence-based assay for the reductase activity of protein disulfide isomerase

We report on a new spectrofluorimetric assay for the measurement of reductase activity of proteins belonging to the superfamily of thioredoxins such as protein disulfide isomerase (PDI). The assay relies on the preparation of a fluorescence-quenched substrate easily accessible in two steps through functional group transformations of the peptide Gly-Cys-Asp. In the first step fluorescein isothiocyanate is linked to the Gly-NH(2) terminus and in the second step the Cys-SH groups are converted into a disulfide bond. Both intermediate and final substrate have been fully characterized by mass spectrometric and nuclear magnetic resonance measurements. Dimethyl sulfoxide is here reported to be a mild oxidizing agent allowing us to obtain in good overall yield the assay substrate in a single synthetic step. A reliable estimation of PDI reductase activity is obtained via the detection of a strong fluorescence enhancement after enzymatic reduction. Moreover, our assay provides further support for the key role played by thioredoxin reductase in enabling disulfide reductase activity of PDI.     

肽合成中多对二硫键的形成策略及分析方法

二硫键的正确配对是富含二硫键多肽合成的关键。本文综述了含两对二硫键以上的多肽二硫键的形成策略,优化方法、以及二硫键配对方式的测定方法。     

Conformations of cysteine disulfides of peptide toxins: Advantage of differentiating forward and reverse asymmetric disulfide conformers

Conformations of cysteine disulfides were analyzed in X-ray, nuclear magnetic resonance (NMR), and co-crystal structures of peptide toxins retrieved from Protein Data Bank. The parameters side chain torsional angles, disulfide strain energy, interatomic Cα/Cβ distances, and Ramachandran angles were used as probes to derive conformational features of cysteine disulfides. Schmidt, Ho, and Hogg (2006 Schmidt, B., Ho, L., &; Hogg, P. J. (2006). Allosteric disulfide bonds. Biochemistry, 45, 7429–7433.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]) Allosteric disulfide bonds. Biochemistry, 45, 7429–7433 scheme was adapted to classify the disulfide conformations of peptide toxins. Anomalies were observed while treating “forward” and “reverse” asymmetric disulfide conformers as same disulfide conformation in peptide toxins. Thus, new scheme was proposed to classify “forward” and “reverse” asymmetric disulfide conformers separately. Total available conformers space for classification of toxins disulfides is 32. Interestingly, all 32 disulfide conformations are observed in peptide toxins. –LHSpiral is predominant disulfide conformation of peptide toxins. Significant variations were observed in population of occurrence of disulfide conformers, disulfide strain energy, and distribution of D_Cα-Cα and D_Cβ-Cβ values between X-ray, NMR, and co-crystal structures of peptide toxins. The observed differences in conformations of disulfides of same peptide toxins between different states were used as platform to demonstrate advantage of differentiating forward and reverse asymmetric disulfide conformers. Newly proposed scheme allows accurate representation of true conformational diversity of disulfides between X-ray and NMR structures of same peptide toxins. Newly proposed scheme also permits to derive additional structural information from nomenclature which was illustrated by comparing conformations of disulfides between unbound and bound form of toxin with channel/receptor. The results will be of interest for growing field of structural venomics and conformational analysis of peptide/protein disulfides.

Communicated by Ramaswamy H. Sarma     

A simple contact mapping algorithm for identifying potential peptide mimetics in protein–protein interaction partners

A simple, static contact mapping algorithm has been developed as a first step at identifying potential peptide biomimetics from protein interaction partner structure files. This rapid and simple mapping algorithm, “OpenContact” provides screened or parsed protein interaction files based on specified criteria for interatomic separation distances and interatomic potential interactions. The algorithm, which uses all‐atom Amber03 force field models, was blindly tested on several unrelated cases from the literature where potential peptide mimetics have been experimentally developed to varying degrees of success. In all cases, the screening algorithm efficiently predicted proposed or potential peptide biomimetics, or close variations thereof, and provided complete atom‐atom interaction data necessary for further detailed analysis and drug development. In addition, we used the static parsing/mapping method to develop a peptide mimetic to the cancer protein target, epidermal growth factor receptor. In this case, secondary, loop structure for the peptide was indicated from the intra‐protein mapping, and the peptide was subsequently synthesized and shown to exhibit successful binding to the target protein. The case studies, which all involved experimental peptide drug advancement, illustrate many of the challenges associated with the development of peptide biomimetics, in general. Proteins 2014; 82:2253–2262. © 2014 The Authors. Proteins: Structure, Function, and Bioinformatics Published by Wiley Periodicals, Inc.     

Comparative peptide mapping of baculovirus polyhedrins

Amino terminals and two-dimensional high-voltage peptide maps of tryptic digests of polyhedrins from Heliothis armigera nuclear polyhedrosis virus (NPV), Heliothis zea NPV, and Anticarsa gemmatalis NPV were compared with previously characterized granulins and polyhedrins. Similarities and differences were detected in the tryptic maps, while each protein produced a unique peptide map composite. Amino-terminal determination of eight polyhedrins and granulins resulted in three different end groups.     

Analysis of the disulfide bonding pattern between domain sequences of recombinant prochymosin solubilized from inclusion bodies

Prochymosin contains three disulfide bonds linking Cys45 to Cys50, Cys206 to Cys210, and Cys250 to Cys283. To analyze the disulfide bonding pattern between domain sequences in the recombinant prochymosin molecule solubilized from inclusion bodies by 8 M urea (designated as solubilized prochymosin), a simple peptide mapping method was established. This process consists of thiol alkylation, cleavage with cyanogen bromide, diagonal electrophoresis on polyacrylamide gel, and N-terminal sequencing. By using this procedure it was found that Cys45 and Cys50 located in the N-terminal domain are not mispaired with the cysteine residues, located in the C-terminal domain, in the solubilized wild-type prochymosin and its mutants. This result implies that Cys45 and Cys50, the partners of a native disulfide, are restricted in some ordered structures existing in inclusion bodies and remaining after solubilization. These native structural elements act as folding nuclei to initiate and facilitate correct refolding. The strategy of preserving the native-like structures including native disulfide in the solubilized inclusion bodies to enhance renaturation efficiency may be applicable to other recombinant proteins.Both authors contributed equally to this work     

Determination of the disulfide bond pairings in human tissue factor pathway inhibitor purified fromEscherichia coli

The disulfide bond assignments of human alanyl tissue factor pathway inhibitor purified fromEscherichia coli have been determined. This inhibitor of the extrinsic blood coagulation pathway possesses three Kunitz-type inhibitor domains, each containing three disulfide bonds. The disulfide bond pairings in domains 1 and 3 were determined by amino acid sequencing and mass spectrometry of peptides derived from a thermolysin digest. However, thermolysin digestion did not cleave any peptide bonds within domain 2. The disulfide bond pairings in domain 2 were determined by isolating it from the thermolysin treatment and subsequently cleaving it with pepsin and trypsin into peptides which yielded the three disulfide bond pairings in this domain. These results demonstrate that the disulfide pairings in each of the three domains of human tissue factor pathway inhibitor purified fromEscherichia coli are homologous to each other and also to those in bovine pancreatic trypsin inhibitor.     

Rapid,automated characterization of disulfide bond scrambling and IgG2 isoform determination

ABSTRACT

Human antibodies of the IgG2 subclass exhibit complex inter-chain disulfide bonding patterns that result in three structures, namely A, A/B, and B. In therapeutic applications, the distribution of disulfide isoforms is a critical product quality attribute because each configuration affects higher order structure, stability, isoelectric point, and antigen binding. The current standard for quantification of IgG2 disulfide isoform distribution is based on chromatographic or electrophoretic techniques that require additional characterization using mass spectrometry (MS)-based methods to confirm disulfide linkages. Detailed characterization of the IgG2 disulfide linkages often involve MS/MS approaches that include electrospray ionization or electron-transfer dissociation, and method optimization is often cumbersome due to the large size and heterogeneity of the disulfide-bonded peptides. As reported here, we developed a rapid LC-MALDI-TOF/TOF workflow that can both identify the IgG2 disulfide linkages and provide a semi-quantitative assessment of the distribution of the disulfide isoforms. We established signature disulfide-bonded IgG2 hinge peptides that correspond to the A, A/B, and B disulfide isoforms and can be applied to the fast classification of IgG2 isoforms in heterogeneous mixtures.     

Characterization of a membrane-specific tubulin isoform by peptide mapping

A membrane-specific tubulin-like protein, found in preparations of synaptic plasma membranes and brain mitochondria, was analyzed by chemical and proteolytic peptide mapping to determine which part of the molecule was different from cytoplasmic tubulin. The membrane polypeptide was identical to alpha tubulin in the first two-thirds of the molecule containing the amino terminal, as found by peptide mapping. However, some differences were observed in the peptide maps of the carboxy terminal one third of the molecule which includes a domain that is important in the regulation of tubulin self-assembly.     

Radioiodination and I-labeled peptide mapping of proteins on nitrocellulose membranes

A rapid procedure for generating dozens of ¹²⁵I-labeled peptide maps from a protein band excised from a single lane of a sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) gel has been developed. Proteins, which can be rapidly purified by 2× SDS-PAGE separation, are electroblotted onto nitrocellulose paper (NCP) and located by aqueous naphthol blue-black staining. All subsequent steps of radioiodination, and enzyme or chemical cleavage, are carried out on the NCP making it possible to test a variety of cleavage reagents on the same protein sample. The resultant peptidic residues, which can be separated by thin-layer electrophoresis-thin-layer chromatography (2D TLE-TLC), SDS-PAGE, or HPLC, can be used in comparative studies or they can be recovered for further structural and immunological analyses.     

Nitrate reductase-deficient mutants in barley: enzyme stability and peptide mapping

Thermal stability and pH optima of NADH-nitrate reductase-associated cytochrome c reductase and FMNH₂-nitrate reductase from wild type, cv Steptoe or Winer, and mutants nar 1d, nar 1g, nar 1h, Xno 18 and Xno 19 were compared to determine if structural differences in the nitrate reductase protein could be detected. Also, the nitrate reductase-associated cytochrome c reductase from nar 1d was purified and compared with the wild type by peptide mapping. The pH optimum for FMNH₂-nitrate reductase from Steptoe and nar 1h, and for NADH-cytochrome c reductase from Steptoe, nar 1d, nar 1g and nar 2a was 7.5. Thermal stabilities of the nitrate reductase-associated activities (FMNH₂-nitrate reductase or NADH-cytochrome c reductase) from nar mutants were less than the Steptoe wild type, while Xno mutants were equal to the Winer wild type. Cleveland peptide maps of nar 1d NADH-cytochrome c reductase and Steptoe nitrate reductase were identicalwhen digested with endoprotease lys-C but were distinctly different in one peptide when digested with Staphylococcus aureus endoprotease V8. These results provide evidence that nar 1 gene codes for the nitrate reductase polypeptide.     

Synthesis of cyclic peptides and peptide libraries on a new disulfide linker.

A new cysteine-based disulfide linker for Fmoc solid phase peptide synthesis was developed (Fmoc-Cys(3-mercapto-3-methylbutanoic acid)OPp) that allows the on-resin assembly and side chain deprotection of cyclic peptides. Model peptides and a cyclic peptide library of the structure [a-a-x-x-a-a-c] composed of D-amino acids were assembled and the synthesis and cleavage conditions studied. The best cyclization results were obtained with PyBOP/HOAt/diisopropylethyl amine. Racemization rates of the cysteine in the analyzed model sequences were between 5.2 and 12.3%. Cleavage of the disulfide bond was best carried out with DTT in 50% 2-propanol/100 mM ammonium bicarbonate. The cleaved peptides can be used directly in biological assays.     

Modulation of the antagonistic properties of an insulin mimetic peptide by disulfide bridge modifications

Insulin is a peptide responsible for regulating the metabolic homeostasis of the organism; it elicits its effects through binding to the transmembrane insulin receptor (IR). Insulin mimetics with agonistic or antagonistic effects toward the receptor are an exciting field of research and could find applications in treating diabetes or malignant diseases. We prepared five variants of a previously reported 20-amino acid insulin-mimicking peptide. These peptides differ from each other by the structure of the covalent bridge connecting positions 11 and 18. In addition to the peptide with a disulfide bridge, a derivative with a dicarba bridge and three derivatives with a 1,2,3-triazole differing from each other by the presence of sulfur or oxygen in their staples were prepared. The strongest binding to IR was exhibited by the peptide with a disulfide bridge. All other derivatives only weakly bound to IR, and a relationship between increasing bridge length and lower binding affinity can be inferred. Despite their nanomolar affinities, none of the prepared peptide mimetics was able to activate the insulin receptor even at high concentrations, but all mimetics were able to inhibit insulin-induced receptor activation. However, the receptor remained approximately 30% active even at the highest concentration of the agents; thus, the agents behave as partial antagonists. An interesting observation is that these mimetic peptides do not antagonize insulin action in proportion to their binding affinities. The compounds characterized in this study show that it is possible to modulate the functional properties of insulin receptor peptide ligands using disulfide mimetics.     

Intrachain disulfide bond in the core hinge region of human IgG4.

IgG is a tetrameric protein composed of two copies each of the light and heavy chains. The four-chain structure is maintained by strong noncovalent interactions between the amino-terminal half of pairs of heavy-light chains and between the carboxyl-terminal regions of the two heavy chains. In addition, interchain disulfide bonds link each heavy-light chain and also link the paired heavy chains. An engineered human IgG4 specific for human tumor necrosis factor-alpha (CDP571) is similar to human myeloma IgG4 in that it is secreted as both disulfide bonded tetramers (approximately 75% of the total amount of IgG) and as tetramers composed of nondisulfide bonded half-IgG4 (heavy chain disulfide bonded to light chain) molecules. However, when CDP571 was genetically engineered with a proline at residue 229 of the core hinge region rather than serine, CDP571 (S229P), or with an IgG1 rather than IgG4 hinge region, CDP571(gamma 1), only trace amounts of nondisulfide bonded half-IgG tetramers were observed. Trypsin digest reversephase HPLC peptide mapping studies of CDP571 and CDP571(gamma 1) with on-line electrospray ionization mass spectroscopy supplemented with Edman sequencing identified the chemical factor preventing inter-heavy chain disulfide bond formation between half-IgG molecules: the two cysteines in the IgG4 and IgG1 core hinge region (CPSCP and CPPCP, respectively) are capable of forming an intrachain disulfide bond. Conformational modeling studies on cyclic disulfide bonded CPSCP and CPPCP peptides yielded energy ranges for the low-energy conformations of 31-33 kcal/mol and 40-42 kcal/mol, respectively. In addition, higher torsion and angle bending energies were observed for the CPPCP peptide due to backbone constraints caused by the extra proline. These modeling results suggest a reason why a larger fraction of intrachain bonds are observed in IgG4 rather than IgG1 molecules: the serine in the core hinge region of IgG4 allows more hinge region flexibility than the proline of IgG1 and thus may permit formation of a stable intrachain disulfide bond more readily.     

Development of disulfide peptide mapping and determination of disulfide structure of recombinant human osteoprotegerin chimera produced in Escherichia coli

Recombinant human osteoprotegerin chimera is a 90-kDa protein containing a human IgG Fc domain fused to human osteoprotegerin. The molecule is a dimer linked by two intermolecular disulfide bonds and contains eleven intramolecular disulfide bonds per monomer. A cysteine-rich region in osteoprotegerin contains nine disulfide bridges homologous to the cysteine-rich signature structure of the tumor necrosis factor receptor/nerve growth factor receptor superfamily. In this report, we have developed peptide mapping procedures suitable to generate disulfide-containing peptides for disulfide structure assignment of the fusion molecule. The methods employed included proteolytic digestion using endoproteinases Glu-C and Lys-C in combination followed by LC-MS analyses. Disulfide linkages of peptide fragments containing a single disulfide bond were assigned by sequence analysis via detection of (phenylthiohydantoinyl) cystine and/or by MS analysis. Disulfide bonds of a large, core fragment containing three peptide sequences linked by four disulfides were assigned after generation of smaller disulfide-linked peptides by a secondary thermolysin digestion. Disulfide structures of peptide fragments containing two disulfide bonds were assigned using matrix-assisted laser desorption ionization mass spectrometry with postsource decay. Both the inter- and intramolecular disulfide linkages of the chimeric dimer were confirmed.     

Specificity in substrate binding by protein folding catalysts: tyrosine and tryptophan residues are the recognition motifs for the binding of peptides to the pancreas-specific protein disulfide isomerase PDIp

Using a cross-linking approach, we recently demonstrated that radiolabeled peptides or misfolded proteins specifically interact in vitro with two luminal proteins in crude extracts from pancreas microsomes. The proteins were the folding catalysts protein disulfide isomerase (PDI) and PDIp, a glycosylated, PDI-related protein, expressed exclusively in the pancreas. In this study, we explore the specificity of these proteins in binding peptides and related ligands and show that tyrosine and tryptophan residues in peptides are the recognition motifs for their binding by PDIp. This peptide-binding specificity may reflect the selectivity of PDIp in binding regions of unfolded polypeptide during catalysis of protein folding.