An amperometric biosensor based on horseradish peroxidase immobilized onto maize tassel-multi-walled carbon nanotubes modified glassy carbon electrode for determination of heavy metal ions in aqueous solution

A biosensor for trace metal ions based on horseradish peroxidase (HRP) immobilized on maize tassel-multiwalled carbon nanotube (MT-MWCNT) through electrostatic interactions is described herein. The biosensor was characterized using Fourier transform infrared (FTIR), UV–vis spectrometry, voltammetric and amperometric methods. The FTIR and UV–vis results inferred that HRP was not denatured during its immobilization on MT-MWCNT composite. The biosensing principle was based on the determination of the cathodic responses of the immobilized HRP to H₂O₂, before and after incubation in trace metal standard solutions. Under optimum conditions, the inhibition rates of trace metals were proportional to their concentrations in the range of 0.092–0.55 mg L⁻¹, 0.068–2 mg L⁻¹ for Pb²⁺ and Cu²⁺ respectively. The limits of detection were 2.5 μg L⁻¹ for Pb²⁺ and 4.2 μg L⁻¹ for Cu²⁺. Representative Dixon and Cornish-Bowden plots were used to deduce the mode of inhibition induced by the trace metal ions. The inhibition was reversible and mixed for both metal ions. Furthermore, the biosensor showed good stability, selectivity, repeatability and reproducibility.     

重金属生物吸附剂的应用研究现状

1　前言含重金属废水是对生态环境危害极大的一类污染源。进入环境中的重金属往往参与食物链循环并在生物体内积累 ,破坏生物体的正常生理代谢[1,2 ] 。如何消除重金属的危害并有效地回收废水中的贵重金属是当今环境保护工作中面临的一个非常突出的问题。重金属废水主要来源于电镀、采矿、冶炼、化工、纺织、印染、化纤等行业 ,传统含重金属废水的处理方法主要有沉淀法、化学氧化还原法、蒸发法、离子交换法、电化学处理法、膜技术分离法等 ,这些方法最突出的缺点在于处理低浓度 ( <1 0 0ｍｇ/ｌ)重金属废水时 ,操作繁琐、运行费用较高。近…     

A mediatorless biosensor for putrescine using multiwalled carbon nanotubes

Poly(diallyldimethylammonium) chloride, having a capability of dispersing multiwalled carbon nanotubes (MWCNTs), permits the modification of electrode surfaces. Together with putrescine oxidase, a MWCNT modified glassy carbon electrode was constructed for the development of a mediatorless putrescine biosensor. Nanoscale "dendrites" of MWCNTs were reasoned to form a network, projecting outward from the electrode surface acting like bundled ultra-microelectrodes, thereby permitting access to the active site and facilitating direct electron transfer to the immobilized enzyme. Our biosensor was capable of efficiently monitoring the direct electroactivity of putrescine oxidase at the electrode surface. Direct electron transfer permits the detection of putrescine at negative potentials, circumventing the interference of endogenous ascorbic and uric acids, which often complicate the analysis of important compounds in plasma. Compared with the most common interfering species, such as spermine, spermidine, cadaverine, and histamine, a detection limit of 5 microM and a response 20 times greater were found for putrescine. Tests performed on plasma of cancerous mice demonstrated that the detection of putrescine could be carried out very quickly on mammalian plasma without previous purification.     

Enzymes immobilized on carbon nanotubes

Enzyme immobilizations on carbon nanotubes for fabrication of biosensors and biofuel cells and for preparation of biocatalysts are rapidly emerging as new research areas. Various immobilization methods have been developed, and in particular, specific attachment of enzymes on carbon nanotubes has been an important focus of attention. The method of immobilization has an effect on the preservation of the enzyme structure and retention of the native biological function of the enzyme. In this review, we focus on recent advances in methodology for enzyme immobilization on carbon nanotubes.     

Transformation and transfection of Pseudomonas aeruginosa: effects of metal ions.

The ability of different metal ions to promote transformation of Pseudomonas aeruginosa by deoxyribonucleic acid of the plasmid RP1 was examined. CaCl2, MgCl2, and MnCl2 were found to promote such transformation, although at different frequencies and with the optimum response at different concentrations. Only MgCl2 promoted transfection of P. aeruginosa by the linear deoxyribonucleic acid of phage F116. CaCl2 was demonstrated to allow adsorption and entry into the cell of F116 deoxyribonucleic acid such that it became resistant to exogenous deoxyribonuclease, but phage production occurred only when MgCl2 was provided. Inactivation of linear phage deoxyribonucleic acid taken up in the absence of MgCl2 was observed. The transfection frequencies at various concentrations of MgCl2 were compared, and the optimum response occurred at the concentration which promoted the highest frequency of transformation by RP1 deoxyribonucleic acid.     

Cr(VI) reduction by Pseudomonas aeruginosa immobilized in a polyvinyl alcohol/sodium alginate matrix containing multi-walled carbon nanotubes

Pseudomonas aeruginosa (P. aeruginosa) was immobilized with polyvinyl alcohol (PVA), sodium alginate and multiwalled carbon nanotubes (MCNTs). After immobilization, the beads were subjected to freeze-thawing to enhance mechanical strength. When exposed to 80 mg/L Cr(VI), the immobilized bacteria were able to reduce 50% of them in 84 h, however the free cells were deactivated at this concentration. The beads were used to reduce 50 mg/L Cr(VI) for nine times, with the reduction efficiency above 90% in the first five times and 65% in the end.     

Antibody-based sensors for heavy metal ions

Competitive immunoassays for Cd(II), Co(II), Pb(II) and U(VI) were developed using identical reagents in two different assay formats, a competitive microwell format and an immunosensor format with the KinExA™ 3000. Four different monoclonal antibodies specific for complexes of EDTA–Cd(II), DTPA–Co(II), 2,9-dicarboxyl-1,10-phenanthroline–U(VI), or cyclohexyl–DTPA–Pb(II) were incubated with the appropriate soluble metal–chelate complex. In the microwell assay format, the immobilized version of the metal–chelate complex was present simultaneously in the assay mixture. In the KinExA format, the antibody was allowed to pre-equilibrate with the soluble metal-chelate complex, then the incubation mixture was rapidly passed through a microcolumn containing the immobilized metal-chelate complex. In all four assays, the KinExA format yielded an assay with 10–1000-fold greater sensitivity. The enhanced sensitivity of the KinExA format is most likely due to the differences in the affinity of the monoclonal antibodies for the soluble versus the immobilized metal–chelate complex. The KinExA 3000 instrument and the Cd(II)-specific antibody were used to construct a prototype assay that could correctly assess the concentration of cadmium spiked into a groundwater sample. Mean analytical recovery of added Cd(II) was 114.25±11.37%. The precision of the assay was satisfactory; coefficients of variation were 0.81–7.77% and 3.62–14.16% for within run and between run precision, respectively.     

Olive oil waste as a biosorbent for heavy metals

The sourcing of novel, inexpensive biowastes such as olive mill waste (OMW) from the two-decanter olive-oil-production system offers potential for the removal of metal ions by biosorption. OMW can be used in repeated regeneration cycles for the adsorption of heavy metals from aqueous solutions. The metal ions sequestered can be released in an acid solution until the concentration of these metal ions reaches a level where conventional methods can be used to provide economic metal recovery and potential revenue generation. The ability of this biomass to adsorb more than one metal ion from solution may increase its potential for application in the wastewater industry since the majority of industrial effluents contain more than one metallic species. Metal ion adsorption was found to increase with the speed of agitation and at an optimum pH value of between 4 and 7.     

Native fungal pellets as a biosorbent for heavy metals

Abstract: Fungal pellets (diameters ranging from 0.5 to 2 mm) were precultured in sugar-containing industrial sewage. They were packed into chromatography columns and then tested for biosorption of silver, copper and lead, using the downflow method. The physical parameters taken (differential pressure at the column, flow rate, bed height) showed rather good mechanical properties of the pellets. Charging the column with heavy metal solution (1 mM Ag+, Cu2+ or Pb2+ as nitrates in distilled water) resulted in very good biosorptive properties. Eluted solution contained less than or an equal amount of 1 gM heavy metal, demonstrating a removal of more than 99.9% of added metal.     

Production of rhamnolipids by semi-solid-state fermentation with Pseudomonas aeruginosa RG18 for heavy metal desorption

Bioprocess and Biosystems Engineering - Foaming problem and cost of substrate limit the commercial application of rhamnolipids, a potential biosurfactant produced by Pseudomonas aeruginosa. We...     

Screening of suitable immobilized metal chelates for adsorption of monoclonal antibodies against mutant amidase from Pseudomonas aeruginosa

The chromatographic behaviour of monoclonal antibodies (MAbs) of IgM class against mutant (T103I) amidase from Pseudomonas aeruginosa was investigated. The effect of ligand concentration, the length of spacer arm and the nature of metal ion were investigated on immobilized metal ion affinity chromatography (IMAC). MAbs against mutant amidase adsorbed to Cu (II), Ni (II), Zn (II), Co (II) and Ca (II)-IDA agarose columns. The adsorption of MAbs onto immobilized metal chelates was pH dependent because an increase in the binding of MAbs was observed as the pH was raised from 6.0 to 8.0. The adsorption of MAbs to metal chelates was due to coordination of histidine residues which are available in the 3rd constant domain of heavy chain (CH3) of immunoglobulins since the presence of imidazole in the equilibration buffer abolished the adsorption of MAbs to the column packed with commercial IDA-Zn(II) agarose at pH 8.0. The combination of tailor-made stationary phases for IMAC and a correct choice of the adsorption conditions permitted to design a one-step purification procedure for MAbs of IgM class. Culture supernatants containing MAbs of IgM class against mutant amidase (T103I) were chromatographed by IMAC Co (II) column at pH 8.0. The results strongly suggest that one-step purification of MAbs of IgM class by IMAC is a cost-effective and process-compatible alternative to the other purification procedures.     

Activated parthenium carbon as an adsorbent for the removal of dyes and heavy metal ions from aqueous solution

Parthenium hysterophorous (L) is a perennial weed distributed all over the country. Carbonized parthenium activated with conc. H2SO4 and ammonium persulphate was effective in the removal of dyes, heavy metals and phenols. Variation in the percentage removal of adsorbates was observed with increase in the contact time. Among the adsorbates tested, the affinity of the activated parthenium carbon was highest for Hg2+, Methylene Blue and Malachite Green.     

Effect of metal ions on growth of Pseudomonas aeruginosa and siderophore and protein production

Pseudomonas aeruginosa (GRC1) isolated from potato rhizosphere, grew better on succinate medium than tryptic soy medium and produced hydroxamate type of siderophore in iron-deficient succinate medium. When the strain GRC1 was grown in the presence of different metal ion compounds, viz. ZnSO4, MnSO4, MnCl2 and FeCl3 at 6 and 12 microM concentrations individually, ZnSO4 (12 microM) promoted siderophore production but suppressed the growth and protein content of test organism. MnCl2 and FeCl3 (12 microM) enhanced the growth, whereas MnCl2 and MnSO4 (12 microM) induced protein contents of strain GRC1.     

A third-generation hydrogen peroxide biosensor based on horseradish peroxidase immobilized in a tetrathiafulvalene-tetracyanoquinodimethane/multiwalled carbon nanotubes film

A new third-generation biosensor for H(2)O(2) assay was developed on the basis of the immobilization of horseradish peroxidase (HRP) in a nanocomposite film of tetrathiafulvalene-tetracyanoquinodimethane (TTF-TCNQ)/multiwalled carbon nanotubes (MWCNTs) modified gold electrode. The prepared HRP/TTF-TCNQ/MWCNTs/Au electrode was used for the bioelectrocatalytic reduction of H(2)O(2), with a linear range from 0.005 to 1.05mM and a detection limit of 0.5muM for amperometric sensing of H(2)O(2). In addition, a novel method on the basis of electrochemical quartz crystal microbalance (EQCM) measurements was proposed to determine the effective enzymatic specific activity (ESA) of the immobilized HRP for the first time, and the ESA was found to be greater at the TTF-TCNQ/MWCNTs/Au electrode than that at the MWCNTs/Au or TTF-TCNQ/Au electrode, indicating that the TTF-TCNQ/MWCNTs film is a good HRP-immobilization matrix to achieve the direct electron transfer between the enzyme and the electrode.     

Activity of exoglycans as sorbents of heavy metal ions]

The ability of yeast exoglycans (from Cryptococcus laurentii, Cr. luteolus, and Sporobolomyces albo-rubescens) to absorb copper and lead ions has been studied. The sorption isotherms have been obtained, which indicates that the mechanism of interactions in the system polysaccharide-metal is complex. For the majority of the glycans, the absorption selectivity was considerably higher in the case of copper, as compared to lead. The observed discrepancy in the effects of pH and temperature on the absorption indicates that the bonds mediating ion absorption by glycans are of different nature. In conclusion, yeast exoglycans are efficient sorbents of copper and lead ions, and lutelan is the most active exoglycan in this respect.     

CzcR-CzcS, a two-component system involved in heavy metal and carbapenem resistance in Pseudomonas aeruginosa

Pseudomonas aeruginosa is an environmental bacterium involved in mineralization of organic matter. It is also an opportunistic pathogen able to cause serious infections in immunocompromised hosts. As such, it is exposed to xenobiotics including solvents, heavy metals, and antimicrobials. We studied the response of P. aeruginosa upon exposure to heavy metals or antibiotics to investigate whether common regulatory mechanisms govern resistance to both types of compounds. We showed that sublethal zinc concentrations induced resistance to zinc, cadmium, and cobalt, while lethal zinc concentrations selected mutants constitutively resistant to these heavy metals. Both zinc-induced and stable zinc-resistant strains were also resistant to the carbapenem antibiotic imipenem. On the other hand, only 20% of clones selected on imipenem were also resistant to zinc. Heavy metal resistance in the mutants could be correlated by quantitative real time PCR with increased expression of the heavy metal efflux pump CzcCBA and its cognate two-component regulator genes czcR-czcS. Western blot analysis revealed reduced expression of the basic amino acid and carbapenem-specific OprD porin in all imipenem-resistant mutants. Sequencing of the czcR-czcS DNA region in eight independent zinc- and imipenem-resistant mutants revealed the presence of the same V194L mutation in the CzcS sensor protein. Overexpression in a susceptible wild type strain of the mutated CzsS protein, but not of the wild type form, resulted in decreased oprD and increased czcC expression. We further show that zinc is released from latex urinary catheters into urine in amounts sufficient to induce carbapenem resistance in P. aeruginosa, possibly compromising treatment of urinary tract infections by this class of antibiotics.     

Electrochemical detection of xanthine in fish meat by xanthine oxidase immobilized on carboxylated multiwalled carbon nanotubes/polyaniline composite film

A commercial xanthine oxidase (XOD) was immobilized covalently onto carboxylated multiwalled carbon nanotubes (c-MWCNT) and polyaniline (PANI) composite film electrodeposited on the surface of a Pt electrode, using N-ethyl-N′-(3-dimethyl aminopropyl) carbodiimide (EDC) and N-hydroxy succinimide (NHS) chemistry. A xanthine biosensor was fabricated using XOD/c-MWCNT/PANI/Pt electrode as a working electrode, Ag/AgCl (3 M KCl) as standard electrode and Pt wire as auxiliary electrode connected through a potentiostat. The enzyme electrode was characterized by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectrophotometry and electrochemical impedance spectroscopy (EIS). The biosensor showed optimum response within 4 s at pH 7.0 and 35 °C, when polarized at 0.4 V. The optimized xanthine biosensor showed linear response range of 0.6–58 μM, with a detection limit of 0.6 μM (S/N = 3), and a correlation coefficient of 0.98. The biosensor was applied to determine xanthine in fish meat. The biosensor lost 50% of its initial activity after its 200 uses over a period of 100 days.     

Resistance of certain strains of Pseudomonas bacteria to toxic effect of heavy metal ions]

The effect of heavy metal cations (cobalt, nickel, and copper) and the anion detergent sodium dodecyl sulfate (SDS) on the barrier properties of the plasma membrane (PM) of the Co-sensitive stain Pseudomonas putida BS394 and the Co-resistant strains Pseudomonas sp. BS501 (wild-type strain) and Pseudomonas putida BS394 (pBS501) (transformed strain) was studied by high-frequency electro-orientational spectroscopy. The cations were found to rank, in order of decreasing damage inflicted on the PM, as copper > cobalt > nickel. The strains studied were found to rank, in order of increasing resistance of the PM to damage inflicted by copper and cobalt cations, as P. putida BS394 < P. putida BS394 (pBS501) < Pseudomonas sp. BS501. In order of increasing resistance to SDS, the strains ranked inversely. The strains did not differ in sensitivity to nickel cations. Investigation of the surface of intact and trypsin-treated cells by microelectrophoresis showed that the surface layers of the cell wall of wild-type and transformed cells contained increased amounts of proteins. The surface proteins of Co-resistant cells had molecular masses of 49, 40, and 32 kDa. Exposure of Co-resistant cells to trypsin considerably reduced their resistance to cobalt cations. It is assumed that the resistance of the PM of the wild-type and transformed pseudomonads to heavy metal cations is determined by plasmid pBS501 and is related to the synthesis of protective surface proteins of the cell wall.