Gene Cloning of Endoglucanase Cel5A from Cellulose-Degrading <Emphasis Type="Italic">Paenibacillus xylanilyticus</Emphasis> KJ-03 and Purification and Characterization of the Recombinant Enzyme

The bacterial strain Paenibacillus xylanilyticus KJ-03 was isolated from a sample of soil used for cultivating Amorphophallus konjac. The cellulase gene, cel5A was cloned using fosmid library and expressed in Escherichia coli BL21 (trxB). The cel5A gene consists of a 1,743 bp open reading frame and encodes 581 amino acids of a protein. Cel5A contains N-terminal signal peptide, a catalytic domain of glycosyl hydrolase family 5, and DUF291 domain with unknown function. The recombinant cellulase was purified by Ni-affinity chromatography. The cellulase activity of Cel5A was detected in clear band with a molecular weight of 64 kDa by zymogram active staining. The maximum activity of the purified enzyme was displayed at a temperature of 40 °C and pH 6.0 when carboxymethyl cellulose was used as a substrate. It has 44% of its maximum activity at 70 °C and retained 66% of its original activity at 45 °C for 1 h. The purified cellulase hydrolyzed avicel, CMC, filter paper, xylan, and 4-methylumbelliferyl β-d-cellobiose, but no activity was detected against p-nitrophenyl β-d-glucoside. The end products of the hydrolysis of cellotetraose and cellopentaose by Cel5A were detected by thin layer chromatography, while enzyme did not hydrolyze cellobiose and cellotriose.     

Cloning of the cel8Y gene from Pectobacterium chrysanthemi PY35 and its comparison to cel genes of soft-rot Pectobacterium

The phytopathogenic Pectobacterium chrysanthemi (Pch) PY35 secretes multiple isozymes of plant cell wall degrading enzyme cellulases. We cloned a second cel gene that encodes cellulase in Pch PY35. The inserted 2 kb fragment was subcloned in order to geneate pPY710 (cel8Y). The structural organization of the cel8Y gene consists of an open reading frame (ORF) of 999 bp that encodes 332 amino acid residues with a signal peptide of 23 amino acids. The predicted amino acid sequence of Cel8Y was very similar to that of Cellulomonas uda, but completely different from that of the Cel5Z of Pch PY35. It belonged to the glycoside hydrolase family 8, based on amino acid sequence similarities in contrast to Cel5Z of Pch PY35, which was confirmed as family 5. Cel8Y was not closely related to the known cellulases of Pectobacterium. It had the conserved region of the glycoside hydrolase family 8, ASDGDVLIAWALLKAGNKW. The apparent molecular mass of the Cel8Y protein was calculated to be approximately 34 kDa by a carboxymethylcellulosesodium dodecyl sulfate-polyacrylamide gel electrophoresis (CMC-SDS-PAGE). The Cel8Y had a calculated pl of 6.49. It was optimally active at pH 7 with an approximate optimal temperature around 40 degrees C. The cellulase activity of Cel8Y was lower than that of Cel5Z.     

Changes in the activity of the multifunctional β-glycosyl hydrolase (Cel44C-Man26A) from Paenibacillus polymyxa by removal of the C-terminal region to minimum size

Paenibacillus polymyxa GS01 secretes Cel44C-Man26A as a multifunctional enzyme with cellulase, xylanase, lichenase, and mannanase activities. Cel44C-Man26A consists of 1,352 amino acids in which present a catalytic domain (CD) of the glycosyl hydrolase family 44 (GH44), fibronectin domain type 3 (Fn3), catalytic domain of glycosyl hydrolase family 26 (GH26), and a cellulose-binding module type 3 (CBM3). A truncated Cel44C-Man26A protein, consisting of 549 amino acid residues, reacted as a multifunctional mature enzyme despite the absence of the 10 amino acids containing GH44, Fn3, GH26, and CBM3. However, the multifunctional activity was not found in the mature Cel44C-Man26A protein truncated to less than 548 amino acids. The truncated Cel44C-Man26A proteins showed the optimum pH for the lichenase activity was pH 7.0, pH 6.0 for the xylanase and mannanase, and pH 5.0 for the cellulase. The truncated Cel44C-Man26A proteins exhibited enzymatic activity 40–120% higher than the full-length Cel44C.     

Characterization of a thermoactive endoglucanase isolated from a biogas plant metagenome

A metagenomic library from DNA isolated from a biogas plant was constructed and screened for thermoactive endoglucanases to gain insight into the enzymatic diversity involved in plant biomass breakdown at elevated temperatures. Two cellulase-encoding genes were identified and the corresponding proteins showed sequence similarities of 59% for Cel5A to a putative cellulase from Anaerolinea thermolimosa and 99% for Cel5B to a characterized endoglucanase isolated from a biogas plant reactor. The cellulase Cel5A consists of one catalytical domain showing sequence similarities to glycoside hydrolase family 5 and comprises 358 amino acids with a predicted molecular mass of 41.2 kDa. The gene coding for cel5A was successfully cloned and expressed in Escherichia coli C43(DE3). The recombinant protein was purified to homogeneity using affinity chromatography with a specific activity of 182 U/mg, and a yield of 74%. Enzymatic activity was detectable towards cellulose and mannan containing substrates and over a broad temperature range from 40 °C to 70 °C and a pH range from 4.0 to 7.0 with maximal activity at 55 °C and pH 5.0. Cel5A showed high thermostability at 60 °C without loss of activity after 24 h. Due to the enzymatic characteristics, Cel5A is an attractive candidate for the degradation of lignocellulosic material.

     

Construction of minimum size cellulase (Cel5Z) from Pectobacterium chrysanthemi PY35 by removal of the C-terminal region

Pectobacterium chrysanthemi PY35 secretes the endoglucanase Cel5Z, an enzyme of the glycoside hydrolase family 5. Cel5Z is a 426 amino acid, signal peptide (SP)-containing protein composed of two domains: a large N-terminal catalytic domain (CD; 291 amino acids) and a small C-terminal cellulose binding domain (CBD; 62 amino acids). These two domains are separated by a 30 amino acid linker region (LR). A truncated cel5Z gene was constructed with the addition of a nonsense mutation that removes the C-terminal region of the protein. A truncated Cel5Z protein, consisting of 280 amino acid residues, functioned as a mature enzyme despite the absence of the SP, 11 amino acid CD, LR, and CBD region. In fact, this truncated Cel5Z protein showed an enzymatic activity 80% higher than that of full-length Cel5Z. However, cellulase activity was undetectable in mature Cel5Z proteins truncated to less than 280 amino acids.     

Production in <Emphasis Type="Italic">Trichoderma reesei</Emphasis> of three xylanases from <Emphasis Type="Italic">Chaetomium thermophilum</Emphasis>: a recombinant thermoxylanase for biobleaching of kraft pulp

Three endoxylanase genes were cloned from the thermophilic fungus Chaetomium thermophilum CBS 730.95. All genes contained the typical consensus sequence of family 11 glycoside hydrolases. Genomic copies of Ct xyn11A, Ct xyn11B, and Ct xyn11C were expressed in the filamentous fungus T. reesei under the control of the strong T. reesei cel7A (cellobiohydrolase 1, cbh1) promoter. The molecular masses of the Ct Xyn11A, Ct Xyn11B, and Ct Xyn11C proteins on sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) were 27, 23, and 22 kDa, respectively. Ct Xyn11A was produced almost as efficiently as the homologous xylanase II from a corresponding single-copy transformant strain. Ct Xyn11B production level was approximately half of that of Ct Xyn11A. The amount of Ct Xyn11C was remarkably lower. Ct Xyn11A had the highest temperature optimum and stability of the recombinant xylanases and the highest activity at acid-neutral pH (pH 5–7). It was the most suitable for industrial bleaching of kraft pulp at high temperature.     

A novel salt-tolerant endo-β-1,4-glucanase Cel5A in Vibrio sp. G21 isolated from mangrove soil

Although cellulases have been isolated from various microorganisms, no functional cellulase gene has been reported in the Vibrio genus until now. In this report, a novel endo-β-1,4-glucanase gene, cel5A, 1,362 bp in length, was cloned from a newly isolated bacterium, Vibrio sp. G21. The deduced protein of cel5A contains a catalytic domain of glycosyl hydrolase family 5 (GH5), followed by a cellulose binding domain (CBM2). The GH5 domain shows the highest sequence similarity (69%) to the bifunctional beta 1,4-endoglucanase/cellobiohydrolase from Teredinibacter turnerae T7902. The mature Cel5A enzyme was overexpressed in Escherichia coli and purified to homogeneity. The optimal pH and temperature of the recombinant enzyme were determined to be 6.5–7.5 and 50°C, respectively. Cel5A was stable over a wide range of pH and retained more than 90% of total activity even after treatment in pH 5.5–10.5 for 1 h, indicating high alkali resistance. Moreover, the enzyme was activated after pretreatment with mild alkali, a novel characteristic that has not been previously reported in other cellulases. Cel5A also showed a high level of salt tolerance. Its activity rose to 1.6-fold in 0.5 M NaCl and remained elevated even in 4 M NaCl. Further experimentation demonstrated that the thermostability of Cel5A was improved in 0.4 M NaCl. In addition, Cel5A showed specific activity towards β-1,4-linkage of amorphous region of lignocellulose, and the main final hydrolysis product of carboxymethylcellulose sodium and cellooligosaccharides was cellobiose. As an alkali-activated and salt-tolerant enzyme, Cel5A is an ideal candidate for further research and industrial applications.     

A Novel GH7 Endo-β-1,4-Glucanase from Neosartorya fischeri P1 with Good Thermostability,Broad Substrate Specificity and Potential Application in the Brewing Industry

An endo-β-1,4-glucanase gene, cel7A, was cloned from the thermophilic cellulase-producing fungus Neosartorya fischeri P1 and expressed in Pichia pastoris. The 1,410-bp full-length gene encodes a polypeptide of 469 amino acids consisting of a putative signal peptide at residues 1–20, a catalytic domain of glycoside hydrolase family 7 (GH7), a short Thr/Ser-rich linker and a family 1 carbohydrate-binding module (CBM 1). The purified recombinant Cel7A had pH and temperature optima of pH 5.0 and 60°C, respectively, and showed broad pH adaptability (pH 3.0–6.0) and excellent stability at pH3.0–8.0 and 60°C. Belonging to the group of nonspecific endoglucanases, Cel7A exhibited the highest activity on barley β-glucan (2020 ± 9 U mg^–1), moderate on lichenan and CMC-Na, and weak on laminarin, locust bean galactomannan, Avicel, and filter paper. Under simulated mashing conditions, addition of Cel7A (99 μg) reduced the mash viscosity by 9.1% and filtration time by 24.6%. These favorable enzymatic properties make Cel7A as a good candidate for applications in the brewing industry.     

Thermostable xylanases, Xyn10A and Xyn11A, from the actinomycete Nonomuraea flexuosa: isolation of the genes and characterization of recombinant Xyn11A polypeptides produced in Trichoderma reesei

Two endoxylanases, Nf Xyn11A and Nf Xyn10A, were cloned from a Nonomuraea flexuosa (previously Actinomadura flexuosa) DSM43186 genomic expression library in Escherichia coli. The coding sequences of xyn11A and xyn10A consist of 344 and 492 amino acids, respectively. The catalytic domains belong to family 11 and family 10 of glycoside hydrolases. The C-termini share strong amino acid sequence similarity to carbohydrate-binding module (CBM) families CBM2 and CBM13, respectively. Native Nf Xyn11A, and recombinant Xyn11A expressed in the filamentous fungus Trichoderma reesei, were purified from cultivation media and characterized. The molecular masses of the full-length enzymes determined by mass spectrometry were 32.9 kDa and 33.4 kDa, the recombinant enzyme having higher molecular mass due to glycosylation. In addition, shorter polypeptides with molecular masses of 23.8 kDa and 22.0 kDa were characterized from the T. reesei culture medium, both lacking the C-terminal CBM and the 22.0 kDa polypeptide also lacking most of the linker region. The recombinant polypeptides were similar to each other in terms of specific activity, pH and temperature dependence. However, the 23.8 kDa and 22.0 kDa polypeptides were more thermostable at 80°C than the full-length enzyme. All polypeptide forms were effective in pretreatment of softwood kraft pulp at 80°C.     

Cloning and functional characterization of a novel endo-β-1,4-glucanase gene from a soil-derived metagenomic library

A metagenomic library consisting of 3,024 bacterial artificial chromosome clones was prepared in Escherichia coli DH10B with high-molecular-weight DNA extracted from red soil in South China. A novel cellulase gene with an open reading frame of 1,332 bp, cel5G, encoding an endo-β-1,4-glucanase was cloned using an activity-based screen. The deduced enzyme, Cel5G, belongs to the glycosyl hydrolase family 5 and shares <39% identity with endoglucanases in the GenBank database. cel5G was expressed in E. coli BL21, and the recombinant enzyme Cel5G was purified to homogeneity for enzymatic analysis. Cel5G hydrolyzed a wide range of β-1,4-, β-1,3/β-1,4-, or β-1,3/β-1,6-linked polysaccharides, amorphous cellulose, filter paper, and microcrystalline cellulose. Its highest activity was in 50 mM citrate buffer, pH 4.8, at 50°C. Cel5G is stable over a wide range of pH values (from 2.0 to 10.6) and is thermally stable under 60°C. It is highly tolerant and active in high salt concentrations and is stable in the presence of pepsin and pancreatin. The K _m and V _max values of Cel5G for carboxymethyl cellulose are 19.92 mg/ml and 1,941 μmol min⁻¹ mg⁻¹, respectively. These characteristics indicate that Cel5G has potential for industrial use.     

Activity enhancement of Cel5Z from Pectobacterium chrysanthemi PY35 by removing C-terminal region

The phytopathogenic bacterium Pectobacteium chrysanthemi PY35 secretes Cel5Z endoglucanase belonging to the glycoside hydrolase family 5 of EC 3.2.1.4. The mutation of cel5Z::Omega gene was constructed by cloning the 2.0-kb SmaI fragment containing the streptomycin/spectinomycin-resistance gene of pHP45(Omega) into the BalI site of pPY100. The insertion of Omega fragment generated a new stop codon, removing the Ser/Thr-rich linker region and the cellulose binding domain (CBD) in the C-terminal region of cel5Z gene. By subsequent subcloning from this 4.9-kb fragment (pPY1001), a 1.0-kb (pPY1002) fragment was obtained and designated as cel5Z::Omega. The cel5Z::Omega gene had an open reading frame (ORF) of 1011 bp, encoding 336 amino acids, starting with an ATG codon and ending with a new TGA stop codon. The molecular mass of the Cel5Z::Omega protein in E. coli transformant appeared to be 32 kDa by SDS-PAGE analysis in the presence of carboxymethyl-cellulose (CMC). The Cel5Z::Omega protein hydrolyzed CMC with 1.7-fold higher activity than the intact Cel5Z cellulase.     

Molecular Cloning of Novel Cellulase Genes <Emphasis Type="Italic">cel</Emphasis>9A and <Emphasis Type="Italic">cel</Emphasis>12A from <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> GXN151 and Synergism of Their Encoded Polypeptides

A thermophilic bacterial strain GXN151 which could degrade Avicel efficiently was isolated and identified as Bacillus licheniformis. A genomic library of GXN151 was constructed and two novel endoglucanase genes designated cel9A and cel12A were isolated by screening the library on carboxylmethyl cellulase indicator plates. The analysis of amino acid sequences deduced from the genes indicated that Cel9A consisted of a catalytic domain belonging to glycosyl hydrolase family 9, a linker domain, and a carbohydrate binding module family 3 from N-terminal to C-terminal; Cel12A had only one catalytic domain belonging to glycosyl hydrolase family 12. The combinations of Cel9A and Cel12A produced by the recombinant E. coli exhibited synergistic action against substrates of carboxylmethyl cellulose as well as Avicel.     

A β-1,4-endoglucanase-encoding gene from Cellulomonas pachnodae

 A gene library of Cellulomonas pachnodae was constructed in Escherichia coli and was screened for endoglucanase activity. Five endoglucanase-positive clones were isolated that carried identical DNA fragments. The gene, designated cel6A, encoding an endoglucanase enzyme, belongs to the glycosyl hydrolase family 6 (cellulase family B). The recombinant Cel6A had a molecular mass of 53 kDa, a pH optimum of 5.5, and a temperature optimum of 50–55 °C. The recombinant endoglucanase Cel6A bound to crystalline cellulose and beech litter. Based on amino acid sequence similarity, a clear cellulose-binding domain was not distinguished. However, the regions in the Cel6A amino acid sequence at the positions 262–319 and 448–473, which did not show similarity to any of the known family-6 glycosyl hydrolases, may be involved in substrate binding. Received: 14 January 1999 / Received revision: 29 March 1999 / Accepted: 6 April 1999     

A cel44C-man26A gene of endophytic Paenibacillus polymyxa GS01 has multi-glycosyl hydrolases in two catalytic domains

A bacterial strain Paenibacillus polymyxa GS01 was isolated from the interior of the roots of Korean cultivars of ginseng (Panax ginseng C. A. Meyer). The cel44C-man26A gene was cloned from this endophytic strain. This 4,056-bp gene encodes for a 1,352-aa protein which, based on BLAST search homologies, contains a glycosyl hydrolase family 44 (GH44) catalytic domain, a fibronectin domain type 3, a glycosyl hydrolase family 26 (GH26) catalytic domain, and a cellulose-binding module type 3. The multifunctional enzyme domain GH44 possesses cellulase, xylanase, and lichenase activities, while the enzyme domain GH26 possesses mannanase activity. The Cel44C enzyme expressed in and purified from Escherichia coli has an optimum pH of 7.0 for cellulase and lichenase activities, but is at an optimum pH of 5.0 for xylanase and mannanase activities. The optimum temperature for enzymatic activity was 50°C for all substrates. No detectable enzymatic activity was detected for the Cel44C-Man26A mutants E91A and E222A. These results suggest that the amino acid residues Glu₉₁ and Glu₂₂₂ may play an important role in the glycosyl hydrolases activity of Cel44C-Man26A.     

Thermostable xylanase10B from <Emphasis Type="Italic">Clostridium acetobutylicum</Emphasis> ATCC824

The Clostridium acetobutylicum xylanase gene xyn10B (CAP0116) was cloned from the type strain ATCC 824, whose genome was recently sequenced. The nucleotide sequence of C. acetobutylicum xyn10B encodes a 318-amino acid protein. Xyn10B consists of a single catalytic domain that belongs to family 10 of glycosyl hydrolases. The enzyme was purified from recombinant Escherichia coli. The Xyn10B enzyme was highly active toward birchwood xylan, oat-spelt xylan, and moderately active toward avicel, carboxymethyl cellulose, polygalacturonic acid, lichenan, laminarin, barley--glucan and various p-nitrophenyl monosaccharides. Xyn10B hydrolyzed xylan and xylooligosaccharides to produce xylobiose and xylotriose. The pH optimum of Xyn10B was 5.0, and the optimal temperature was 70°C. The enzyme was stable at 60°C at pH 5.0–6.5 for 1 h without substrate. This is one of a number of xylan-related activities encoded on the large plasmid in C. acetobutylicum ATCC 824.     

Cloning and characterization of a novel cold-active endoglucanase establishing a new subfamily of glycosyl hydrolase family 5 from a psychrophilic deep-sea bacterium

The gene of a novel endo-β-1,4-glucanase (named Cel5M) was isolated from the psychrophilic deep-sea bacteria Pseudomonas sp. MM15. The deduced protein sequence lacked the typical cellulase domain structures of the carbohydrate-binding module and the linker region. Cel5M showed relatively higher activity toward carboxymethyl cellulose, but much lower activity toward p-nitrophenyl-β-D-galactopyranoside and no activity toward avicel. Cel5M was identified as a cold-active cellulase with an optimal temperature of 30 °C and it was active within a narrow pH range with an optimum at pH 4.5. Phylogenetic analysis showed that Cel5M represented a new subfamily of the glycosyl hydrolase family 5, representing an opportunity for research into and applications of novel cold-active cellulases.