Export-defective lamB protein is a target for translational control caused by ompC porin overexpression.

Overexpression of OmpC protein from an inducible plasmid vector reduced the amount of the precursor form of LamB protein in LamB signal sequence mutants. The stability of the precursor form of LamB protein was not affected, indicating that the effect of OmpC overexpression was on the synthesis of the precursor rather than on degradation. These results indicate that a functional signal sequence is not required on an outer membrane protein for it to be a target for translational control.     

Genetic mapping of antigenic determinants on a membrane protein

The antigenic determinants recognized by two monoclonal antibodies were mapped on LamB, an outer membrane protein of Escherichia coli. The procedure consisted of performing immunoprecipitation experiments with extracts of strains which produced truncated fragments of LamB, either in a free form (deletion and nonsense mutants) or fused to another polypeptide (malK-lamB and lamB-lacZ fusion strains). The conclusion is that the two antigenic determinants are located within 70 residues from the COOH-terminal end of LamB, which contains a total of 421 amino acids. Since these two antigenic sites were previously demonstrated to be exposed at the cell surface, it follows that a COOH-terminal portion of LamB must be located on the outer surface of the outer membrane.     

Signal sequence processing is required for the assembly of LamB trimers in the outer membrane of Escherichia coli.

Proteins destined for either the periplasm or the outer membrane of Escherichia coli are translocated from the cytoplasm by a common mechanism. It is generally assumed that outer membrane proteins, such as LamB (maltoporin or lambda receptor), which are rich in beta-structure, contain additional targeting information that directs proper membrane insertion. During transit to the outer membrane, these proteins may pass, in soluble form, through the periplasm or remain membrane associated and reach their final destination via sites of inner membrane-outer membrane contact (zones of adhesion). We report lamB mutations that slow signal sequence cleavage, delay release of the protein from the inner membrane, and interfere with maltoporin biogenesis. This result is most easily explained by proposing a soluble, periplasmic LamB assembly intermediate. Additionally, we found that such lamB mutations confer several novel phenotypes consistent with an abortive attempt by the cell to target these tethered LamB molecules. These phenotypes may allow isolation of mutants in which the process of outer membrane protein targeting is altered.     

Role of a disulfide bond in the thermal stability of the LamB protein trimer in Escherichia coli outer membrane

In order to understand the unusual heat resistance of LamB protein (the outer membrane component of the maltose transport system in Escherichia coli and its receptor for bacteriophage lambda), we investigated the role of its 2 cysteinyl residues. Our studies show that Cys22 and Cys38 form an intrasubunit disulfide bond which contributes to the heat stability of the LamB protein trimer. Physical evidence for the disulfide was obtained by using site-directed mutagenesis to convert Asn36 to Met, which allowed cyanogen bromide cleavage between the 2 cysteines. Upon reduction one of the N36M fragments migrated as two pieces, resolved by two-dimensional polyacrylamide gel electrophoresis. Other mutagenized LamB proteins, in which 1 or both Cys residues were converted to Ser, exhibited a sharp loss of thermal stability. In contrast to wild-type LamB protein trimer, which does not dissociate to monomers even after 60 min at 100 degrees C, only 10-15% of the mutant LamB proteins remain trimeric after boiling 10 min. The disulfide bond in LamB protein is not required for its transport function, since both mutagenized LamB protein and N-ethylmaleimide-labeled LamB protein exhibit normal uptake of sugars in proteoliposomes. Finally, the disulfide bond must not be between subunits of the LamB trimer since reversible dissociation of trimer is achieved by low pH or denaturants in the absence of reducing agent.     

Signal sequence mutations as tools for the characterization of LamB folding intermediates

lamBA23DA25Y and lamBA23YA25Y tether LamB to the inner membrane by blocking signal sequence processing. We isolated suppressors of lamBA23DA25Y and lamBA23YA25Y, all of which mapped within the LamB signal sequence. Most interesting were mutations that changed an amino acid with a strong positive charge to an amino acid with no charge. Further characterization of two such suppressors revealed that they produce functional LamB that is localized to the outer membrane with its entire signal sequence still attached. Biochemical analysis shows that mutant LamB monomer chases into an oligomeric species with properties different from those of wild-type LamB trimer. Because assembly of mutant LamB is slowed, these mutations provide useful tools for the characterization of LamB folding intermediates.     

Antigenic polymorphism of the LamB protein among members of the family Enterobacteriaceae.

In this study we demonstrate that most members of the family Enterobacteriaceae possess a maltose-inducible outer membrane protein homologous to the LamB protein of Escherichia coli K-12. These proteins react with polyclonal antibodies raised against the LamB protein of E. coli K-12. We compared the antigenic structure of the LamB protein in members of the family Enterobacteriaceae with six monoclonal antibodies raised against the LamB protein of E. coli K-12. Four of them reacted with epitopes located at the outer face of the membrane, and two reacted with epitopes located at the inner face of the membrane. A great degree of variability was observed for the external epitopes. Even in a single species, such as E. coli, an important polymorphism was present. In contrast, the internal epitopes were more conserved.     

Structural determinants for signal sequence function in the mammalian endoplasmic reticulum

Signal sequences function in protein targeting to and translocation across the endoplasmic reticulum membrane. To investigate the structural requirements for signal sequence function, chimeras of the Escherichia coli LamB signal peptide and prolactin were prepared. The LamB signal peptide was chosen by virtue of the extensive biophysical and biological characterization of its activity. In vitro, nascent prolactin chains bearing the LamB signal peptide (LamB) were targeted in a signal recognition particle (SRP)-dependent manner to rough microsomes but remained protease- and salt-sensitive and translocated at low efficiency. Full translocation activity was obtained in a gain of function mutant (LamB*) in which three hydrophobic residues in the LamB hydrophobic core were converted to leucine residues. Cross-linking studies demonstrated that the LamB* signal sequence displayed markedly enhanced interactions with SRP and integral membrane proteins. In contrast, chemically denatured LamB and LamB*-precursors bound with identical efficiencies and in a salt-resistant manner to rough microsomes, suggesting that during de novo synthesis the signal sequence of LamB-bearing precursors assumes a conformation refractory to translocation. These data indicate that a leucine-rich signal sequence is necessary for optimal interaction with SRP and suggest that SRP, by maintaining the signal sequence in a conformation suitable for membrane binding, performs a chaperone function.     

Monoclonal antibodies reveal lamB antigenic determinants on both faces of the Escherichia coli outer membrane

LamB protein is involved in the transport of maltose across the outer membrane and constitutes the receptor for phage lambda. In this study we characterized six previously described anti-LamB monoclonal antibodies (mAbs). Four of these, the E-mAbs, recognized determinants that were exposed at the cell surface, whereas the other two, the I-mAbs, recognized determinants which were not exposed. Competition experiments demonstrated that the domains recognized by these two classes of mAbs were completely distinct. In addition, the E-mAbs prevented LamB from neutralizing phage lambda in vitro and protected LamB against proteolytic degradation, whereas the I-mAbs had no such effects. The E-mAbs have been shown previously to constitute two classes: some E-mAbs inhibit maltose transport in vivo, and others do not. Immunoelectron microscopy demonstrated that the I-mAbs also define at least two types of determinants. One of these, which is accessible in membrane fragments from a mutant (lpp) devoid of lipoprotein but not in membrane fragments from an lpp+ strain, probably corresponds to a region of LamB that is involved in the interactions with peptidoglycan. The other determinant, which is fully accessible in LamB-peptidoglycan complexes and in LamB-containing phospholipid vesicles but only slightly accessible in membrane fragments from an lpp mutant, is probably located very close to the inner surface of the outer membrane. LamB also contains at least one additional determinant, which (i) is exposed at the inner surface of the membrane, (ii) is accessible to antibodies in membrane fragments from an lpp+ strain, and (iii) may be involved in the interaction of LamB with the periplasmic maltose-binding protein.     

Complex spatial distribution and dynamics of an abundant Escherichia coli outer membrane protein, LamB

Advanced techniques for observing protein localization in live bacteria show that the distributions are dynamic. For technical reasons, most such techniques have not been applied to outer membrane proteins in Gram-negative bacteria. We have developed two novel live-cell imaging techniques to observe the surface distribution of LamB, an abundant integral outer membrane protein in Escherichia coli responsible for maltose uptake and for attachment of bacteriophage lambda. Using fluorescently labelled bacteriophage lambda tails, we quantitatively described the spatial distribution and dynamic movement of LamB in the outer membrane. LamB accumulated in spiral patterns. The distribution depended on cell length and changed rapidly. The majority of the protein diffused along spirals extending across the cell body. Tracking single particles, we found that there are two populations of LamB--one shows very restricted diffusion and the other shows greater mobility. The presence of two populations recalls the partitioning of eukaryotic membrane proteins between 'mobile' and 'immobile' populations. In this study, we have demonstrated that LamB moves along the bacterial surface and that these movements are restricted by an underlying dynamic spiral pattern.     

Combinatorial mutagenesis of the lamB gene: residues 41 through 43, which are conserved in Escherichia coli outer membrane proteins, are informationally important in maltoporin structure and function.

A new strategy for combinatorial mutagenesis was developed and applied to residues 40 through 60 of LamB protein (maltoporin), with the aim of identifying amino acids important for LamB structure and function. The strategy involved a template containing a stop codon in the target sequence and a pool of random degenerate oligonucleotides covering the region. In vitro mutagenesis followed by selection for function (Dex+, ability to utilize dextrins) corrected the nonsense mutation and simultaneously forced incorporation of a random mutation(s) within the region. The relative importance of each residue within the target was indicated by the frequency and nature of neutral and deleterious mutations recovered at each position. Residues 41 through 43 in LamB accepted few neutral substitutions, whereas residues 55 through 57 were highly flexible in this regard. Consistent with this finding was that the majority of defective mutants were altered at residues 41 to 43. Characterization of these mutants indicated that the nature of residues 41 to 43 influenced the amount of stable protein in the outer membrane. These results, as well as the conserved nature of this stretch of residues among outer membrane proteins, suggest that residues 41 to 43 of LamB play an important role in the process of outer membrane localization.     

Permissive sites and topology of an outer membrane protein with a reporter epitope.

We are developing a genetic approach to study with a single antibody the folding and topology of LamB, an integral outer membrane protein from Escherichia coli K-12. This approach consists of inserting the same reporter foreign antigenic determinant (the C3 epitope from poliovirus) at different sites of LamB so that the resulting hybrid proteins have essentially kept the in vivo biological properties of LamB and therefore its cellular location and structure; the corresponding sites are called permissive sites. A specific monoclonal antibody can then be used to examine the position of the reporter epitope with respect to the protein and the membrane. We present an improved and efficient procedure that led us to identify eight new permissive sites in LamB. These sites appear to be distributed on both sides of the membrane. At one of them (after residue 253), the C3 epitope was detected on intact bacteria, providing the first direct argument for exposure of the corresponding LamB region at the cell surface. At this site as well as at four others (after residues 183, 219, 236, and 352), the C3 epitope could be detected with the C3 monoclonal antibody at the surface of the extracted trimeric LamB-C3 hybrid proteins. We provide a number of convergent arguments showing that the hybrid proteins are not strongly distorted with respect to the wild-type protein so that the conclusions drawn are also valid for this protein. These conclusions are essentially in agreement with the proposed folding model for the LamB protein. They agree, in particular, with the idea that regions 183 and 352 are exposed to the periplasm. In addition, they suggest that region 236 is buried at the external face of the outer membrane and that region 219 is exposed to the periplasm. Including the 3 sites previously determined, 11 permissive sites are now available in LamB, including 3 at the cell surface and most probably at least 3 in the periplasm. We discuss the nature of such sites, the generalization of this approach to other proteins, and possible applications.     

A new suppressor of a lamB signal sequence mutation, prlZ1, maps to 69 minutes on the Escherichia coli chromosome.

Reversion analysis has been employed to isolate suppressors that restore export of a unique LamB signal sequence mutant. The mutation results in a substitution of Arg for Met at position 19, which prevents LamB export to the outer membrane and leads to a Dex- phenotype. Unlike other LamB signal sequence mutants utilized for reversion analysis, LamB19R becomes stably associated with the inner membrane in an export-specific manner. In this study, Dex+ revertants were selected and various suppressors were isolated. One of the extragenic suppressors, designated prlZ1, was chosen for further study. prlZ1 maps to 69 min on the Escherichia coli chromosome. The suppressor is dominant and SecB dependent. In addition to its effect on lamB19R, prlZ1 suppresses the export defect of signal sequence point mutations at positions 12, 15, and 16, as well as several point mutations in the maltose-binding protein signal sequence. prlZ1 does not suppress deletion mutations in either signal sequence. This pattern of suppression can be explained by interaction of a helical LamB signal sequence with the suppressor.     

Assembly pathway of newly synthesized LamB protein an outer membrane protein of Escherichia coli K-12

The assembly of newly induced LamB protein (phage lambda receptor) was investigated in an operon fusion strain of Escherichia coli, in which the lamB gene is expressed under lac promoter control. The induction kinetics both for total cellular and for cell surface-exposed LamB protein were studied by immunochemical detection methods, using two distinct antisera directed against detergent-solubilized LamB trimers and completely denatured LamB monomers, respectively. Anti-trimer antibodies recognized both monomers and trimers, whereas anti-monomer antibodies only reacted with monomers. Provided appropriate solubilization conditions were used, both antisera were able to immunoprecipitate intracellular mature LamB protein quantitatively. Following induction, the first LamB antigenic determinants were detected after 60 to 80 seconds; detection of the newly synthesized protein by anti-monomer antibodies slightly preceded that by anti-trimer antibodies, a finding that could be partly explained by the observation that anti-monomer antibodies recognized a larger fraction of nascent LamB than did anti-trimer antibodies. Exposure of antigenic determinants at the cell surface was delayed for 30 to 50 seconds with respect to their synthesis. Therefore, either translocation or conformational changes must be rate-limiting in the series of processes that eventually convert the newly synthesized protein into its mature outer membrane state. LamB protein was found to occur in at least three clearly distinguishable states. State I is the LamB monomer, state II corresponds to a metastable trimer that dissociates in sodium dodecyl sulphate above 60 degrees C, and state III is the state LamB trimer that dissociates in sodium dodecyl sulphate only at temperatures above 90 degrees C. The chase kinetics of these states showed that conversion of newly synthesized LamB monomers to stable LamB trimers occurred in two stages: state I monomers were chased into metastable state II trimers rapidly (t 1/2 = 20 s), whereas stabilization of state II trimers to state III trimers was a relatively slow (t 1/2 = 5.7 min) process. Based on our results, a timing sequence in the assembly of outer membrane LamB protein is proposed.     

Antibodies against synthetic peptides and the topology of LamB, an outer membrane protein from Escherichia coli K12

LamB, an outer membrane protein from Escherichia coli K12, is involved in the transport of maltose and maltodextrins across the outer membrane and constitutes a receptor for a number of bacteriophages. A recent folding model proposes that LamB spans the outer membrane through a number of transmembranous segments separated by regions exposed either to the cell exterior or to the periplasm. This model is essentially based on predictions of structure and genetic arguments relying on the hypothesis that the mutations studied did not alter the folding of the protein. In order to obtain direct evidence with the unaltered protein, we elicited polyclonal antibodies against synthetic peptides corresponding to several LamB sequences. We chose four regions. Three of them [aa 147-161 (peptide 2), aa 371-385 (peptide 3), and aa 399-413 (peptide 4)] are predicted to face the outside of the cell, and the fourth (aa 19-33 (peptide 1)] is predicted to be periplasmic. By immunoblotting against extracts of various mutants, these antibodies were shown to be specific for LamB and targeted to the selected regions. In some cases, the recognition sites for antibodies were narrowed down to parts of a region. In vivo, on intact cells, anti-peptides 2, 3, and 4 reacted with LamB in an ELISA; this confirmed that regions of peptide 2 and 3 are located, at least in part, at the cell exterior and provided the first proof for a similar, situation of the region of peptide 4. Under the same conditions, anti-peptide 1 did not react with LamB.(ABSTRACT TRUNCATED AT 250 WORDS)     

Characterization of a region in mature LamB protein that interacts with a component of the export machinery of Escherichia coli

It has been shown that the synthesis of an export-defective protein can interfere with the normal export process in Escherichia coli by limiting the availability of SecB protein, a component of the export apparatus (Collier, D.N., Bankaitis, V.A., Weiss, J.B., and Bassford, P.J. (1988) Cell 53, 273-283). Consistent with this observation, we find that the interference elicited by an export-defective LamB protein is a titratable response resulting from the limitation of a single ligand. We have mapped the interfering region in LamB to between amino acids 320 and 380 of the mature protein. Expression of this sequence in the form of a LacZ-LamB-LacZ fusion protein elicits the export interference phenotype. Deletion of the sequence from an export-defective LamB protein eliminates the ability of this protein to interfere with the export of other secreted proteins. Together, these findings show that this sequence is both necessary and sufficient to cause export interference. Surprisingly, deletion of this sequence from an otherwise wild-type LamB protein does not cause the mutant LamB product to exhibit any obvious export defect. Based on our results, we propose that SecB interacts with both amino acids 320-380 of mature LamB and the LamB signal sequence during initiation of the export process.     

High-sensitivity detection of newly induced LamB protein on the Escherichia coli cell surface.

The kinetics of the appearance at the cell surface of the outer membrane LamB protein after induction were determined by using specific antibodies and radioiodinated protein A as a probe. This was done in two different induction systems. First, LamB protein was induced in a wild-type strain by the simultaneous addition of cyclic AMP and maltose. Second, an operon fusion strain in which the lamB gene is expressed under lac promoter control was used; in this system, LamB protein can be induced by isopropyl-beta-D-thiogalactopyranoside. When uninduced cells were grown in glucose minimal medium, background expression of the lamB gene was found to be ca. 10-fold lower in lac-lamB cells than in wild-type cells. The level of LamB protein present in uninduced wild-type cells could, however, be reduced by supplementing the growth medium with Casamino Acids. After induction, the LamB protein appeared at the cell surface of both strains within a few minutes, and then the LamB level per cell increased linearly. The time lag in cell surface exposure of LamB protein differed slightly under both induction conditions: the LamB protein appeared at the surface of lac-lamB cells within 3 min of induction, whereas in wild-type cells it could not be detected earlier than after 4 to 5 min of induction.     

Production of Escherichia coli LamB protein in Yersinia enterocolitica

Abstract Plasmid pBCP 68 carrying the lamB gene of Escherichia coli was introduced and expressed in Yersinia enterocolitica cells. The presence of LamB protein in the outer membrane of the wild-type strain of Y. enterocolitica coincided with the loss of the OmpC and OmpF porins. Western blot analysis showed that LamB in Y. enterocolitica cells co-migrated with authentic monomeric LamB, indicating that its signal peptide was recognized and cleaved by Y. enterocolitica and properly integrated into the outer membrane. The expression of LamB made Y. enterocolitica sensitive to phage λ.     

A model of maltodextrin transport through the sugar-specific porin, LamB, based on deletion analysis.

LamB facilitates the uptake of maltose and maltodextrins across the bacterial outer membrane and acts as a general porin for small molecules. Using directed deletion mutagenesis we removed several regions of the LamB polypeptide and identified a polypeptide loop that both constricts the maltoporin channel and binds maltodextrins. In conjunction with a second sugar binding site that we identified at the rim of the channel, these data clarify, for the first time, the mechanism of transport through a substrate-specific porin. Furthermore, unlike the transverse loops of general porins, which originate from a central location in their primary structure, the loop that regulates LamB permeability originates from a C-terminal site. Thus LamB represents a second distinct class of porins in the bacterial outer membrane that is differently organized and separately evolved from OmpF-type, general porins.     

PH-induced collapse of the extracellular loops closes Escherichia coli maltoporin and allows the study of asymmetric sugar binding

LamB (maltoporin) is essential for the uptake of maltose and malto-oligosaccharides across the outer membrane of Escherichia coli. Purified LamB was reconstituted in artificial lipid bilayer membranes forming channels in the permanently open configuration at neutral pH. Almost complete channel closure was observed when the pH on both sides of the membrane was lowered to pH 4. When LamB was added to only one side of the membrane, the cis-side, and the pH was lowered at either side of the membrane, the cis- or the trans-side, the response to pH was asymmetric, suggesting preferential orientation of maltoporin channels and pH- dependent closure of only one side of the channel. In experiments with LamB mutants in which major external loops L4, L6, and/or L9 were deleted, we identified the surface-exposed loops L4 and L6 as the cause of pH-mediated closure. The pH dependence of the LamB channel is consistent with the assumption that it inserts in a preferential orientation into the lipid bilayer. About 70-80% of the reconstituted channels are oriented with the extracellular entrance toward the side to which the protein was added (the cis-side) and with the periplasmic opening on the opposite side (the trans-side). The possibility of closing the channels, which are oriented in the reverse direction by low pH at the trans-side, allowed the deduction of channel asymmetry with respect to carbohydrate binding kinetics. Whereas maltose binding was found to be almost symmetric with respect to the channel orientation, the sucrose and trehalose binding to LamB was asymmetric. The results are discussed in respect to possible physiological function of the pH-dependent closure of maltoporin.     

Protein translocation into Escherichia coli membrane vesicles is inhibited by functional synthetic signal peptides

A synthetic peptide corresponding to the signal sequence of wild type Escherichia coli lambda-receptor protein (LamB) inhibits in vitro translocation of precursors of both alkaline phosphatase and outer membrane protein A into E. coli membrane vesicles (half-maximal inhibition at 1-2 microM). By contrast, the inhibitory effect was nearly absent in a synthetic peptide corresponding to the signal sequence from a mutant strain that harbors a deletion mutation in the LamB signal region and displays an export-defective phenotype for this protein in vivo. Two peptides derived from pseudorevertant strains that arose from the deletion mutant and exported LamB in vivo were found to inhibit in vitro translocation with effectiveness that correlated with their in vivo export ability. Controls indicated that these synthetic signal peptides did not disrupt the E. coli membrane vesicles. These results can be interpreted to indicate that the presequences of exported proteins interact specifically with a receptor either in the E. coli inner membrane or in the cytoplasmic fraction. However, biophysical data for the family of signal peptides studied here reveal that they will spontaneously insert into a lipid membrane at concentrations comparable to those that cause inhibition. Hence, an indirect effect mediated by the lipid bilayer of the membrane must be considered.