From the mouths of monkeys: detection of Mycobacterium tuberculosis complex DNA from buccal swabs of synanthropic macaques

Although the Mycobacterium tuberculosis complex (MTBC) infects a third of all humans, little is known regarding the prevalence of mycobacterial infection in nonhuman primates (NHP). For more than a century, tuberculosis has been regarded as a serious infectious threat to NHP species. Advances in the detection of MTBC open new possibilities for investigating the effects of this poorly understood pathogen in diverse populations of NHP. Here, we report results of a cross-sectional study using well-described molecular methods to detect a nucleic acid sequence (IS6110) unique to the MTBC. Sample collection was focused on the oral cavity, the presumed route of transmission of MTBC. Buccal swabs were collected from 263 macaques representing 11 species in four Asian countries and Gibraltar. Contexts of contact with humans included free ranging, pets, performing monkeys, zoos, and monkey temples. Following DNA isolation from buccal swabs, the polymerase chain reaction (PCR) amplified IS6110 from 84 (31.9%) of the macaques. In general, prevalence of MTBC DNA was higher among NHP in countries where the World Health Organization reports higher prevalence of humans infected with MTBC. This is the first demonstration of MTBC DNA in the mouths of macaques. Further research is needed to establish the significance of this finding at both the individual and population levels. PCR of buccal samples holds promise as a method to elucidate the mycobacterial landscape among NHP, particularly macaques that thrive in areas of high human MTBC prevalence.     

Differentiation between Mycobacterium tuberculosis and Mycobacterium bovis by a multiplex-polymerase chain reaction

A multiplex-polymerase chain reaction (PCR) assay, based on one-step amplification and detection of three different mycobacterial genomic fragments, was designed for differentiation between Mycobacterium bovis and Mycobacterium tuberculosis. The oligonucleotide primers were chosen from the gro EL gene, present in the genus Mycobacterium sp., from the IS 6110 insertion sequence, present in Myco. tuberculosis complex and from the mtp 40 gene, identified as a specificspecies Myco. tuberculosis genomic fragment. This amplification method allowed the detection of two fragments of 576 and 317 base pairs in Myco. bovis and three fragments of 576, 396 and 317 base pairs in Myco. tuberculosis strains, including atypical strains of Myco. tuberculosis where the copy number of the IS 6110 element is low. The multiplex-PCR assay described may be a very useful tool for the rapid and specific differentiation of these related mycobacteria and easy to use in medical and veterinary microbiology laboratories.     

Direct and simultaneous identification of Mycobacterium tuberculosis complex (MTBC) and Mycobacterium tuberculosis (MTB) by rapid multiplex nested PCR-ICT assay

The Mycobacterium tuberculosis (MTB) shows different virulence and host infection range from other members of the M. tuberculosis complex (MTBC). Differential identification of MTB from MTBC is thus important in certain occasions. The currently commercially available molecular assays which use either IS6110 or 16S rDNA fragment as identification targets are mainly designed for identifying MTBC but not for MTB. Comparative genomic DNA analysis has provided valuable information on regions of difference (RD) present in MTB but not in other members of the MTBC. RD9 region is further suggested to be a potential target for differential identification of MTB from MTBC. In this study, using IS6110 and Rv3618 (belong to RD9) as the specific identification targets for MTBC and MTB, respectively, we developed and tested a multiplex nested PCR-ICT (immuno-chromatography test) assay for simultaneously and directly detecting not only MTBC but also MTB from 1500 clinical sputum specimens. The results were compared with traditional culture and biochemical identification results together with patients' clinical assessments. This assay showed a 95.5% sensitivity, 97.9% specificity, 2.1% false positive rate and 4.5% false negative rate towards detection of MTBC, and a 93.0% sensitivity, 99.8% specificity, 0.2% false positive rate and 7.0% false negative rate for detection of MTB. This detection system shows great potential in clinical application.     

Characterization of a Mycobacterium bovis BCG insertion sequence related to the IS21 family

The structure and distribution of a Mycobacterium bovis BCG insertion element of the IS21 family were investigated. Several IS21-like elements found in mycobacterial genomes were separated in four types, following their nucleic acid similarities. The M. bovis BCG IS21 element is highly similar to IS1533 (class I), 70% similar to IS1534 (class II), 52% similar to IS1532 (class III) of Mycobacterium tuberculosis, and 54% similar to both an Mycobacterium avium serovar 2 and an M. avium silvaticum IS (class IV). The M. bovis BCG IS21 element of the class I appears to be present in a single copy in the genome of M. bovis BCG, M. bovis, M. tuberculosis and Mycobacterium africanum and to be absent from all other tested species of the Corynebacteria-Mycobacteria-Nocardia group.     

Molecular methods for Mycobacterium tuberculosis strain typing: a users guide

There are now a wide range of techniques available to type Mycobacterium tuberculosis, the problem is to choose the correct technique. For large scale epidemiological studies the portability and standardization of IS6110 restriction fragment length polymorphism (RFLP) means that this remains the gold standard technique. In the next few years the internationally standard mycobacterial interspersed repetitive unit (MIRU) may come to challenge this primacy. Low copy number stains remain a problem and these can be typed by either polymorphic Guanine cytosine-rich repetitive sequence (PGRS) or MIRU-variable numbers of tandem repeat (VNTR). To confirm whether strains are part of a true cluster PGRS remains the method of choice. For local outbreaks and investigations of laboratory cross contamination where speed is of greatest importance suspect strains should be initially investigated using a PCR-based method. The superior reproducibility and discrimination of MIRU-VNTR means that these methods should be favoured. If matches are found, then further confirmation of identity can be achieved using IS6110 RFLP or PGRS if the strains prove to have a low IS6110 copy number.     

A genomic library-based amplification approach (GL-PCR) for the mapping of multiple IS6110 insertion sites and strain differentiation of Mycobacterium tuberculosis

Evidence suggests that insertion of the IS6110 element is not without consequence to the biology of Mycobacterium tuberculosis complex strains. Thus, mapping of multiple IS6110 insertion sites in the genome of biomedically relevant clinical isolates would result in a better understanding of the role of this mobile element, particularly with regard to transmission, adaptability and virulence. In the present paper, we describe a versatile strategy, referred to as GL-PCR, that amplifies IS6110-flanking sequences based on the construction of a genomic library. M. tuberculosis chromosomal DNA is fully digested with HincII and then ligated into a plasmid vector between T7 and T3 promoter sequences. The ligation reaction product is transformed into Escherichia coli and selective PCR amplification targeting both 5' and 3' IS6110-flanking sequences are performed on the plasmid library DNA. For this purpose, four separate PCR reactions are performed, each combining an outward primer specific for one IS6110 end with either T7 or T3 primer. Determination of the nucleotide sequence of the PCR products generated from a single ligation reaction allowed mapping of 21 out of the 24 IS6110 copies of two 12 banded M. tuberculosis strains, yielding an overall sensitivity of 87,5%. Furthermore, by simply comparing the migration pattern of GL-PCR-generated products, the strategy proved to be as valuable as IS6110 RFLP for molecular typing of M. tuberculosis complex strains. Importantly, GL-PCR was able to discriminate between strains differing by a single IS6110 band.     

Characterization of a Mycobacterium tuberculosis insertion sequence belonging to the IS3 family

A repetitive element (IS986), previously isolated from Mycobacterium tuberculosis and shown to detect multiple restriction fragment-length polymorphisms (RFLPs), has been sequenced. It consists of a potential insertion sequence of 1358bp, with 30-bp inverted repeat ends. IS986 has four potentially significant open reading frames (ORFs): ORFa1, ORFa2 and ORFb on one strand and ORFc on the complementary strand. The sequences of the potential translated products identify IS986 as a member of the IS3 family, with an apparent frameshift between ORFa1 and ORFa2. IS986 has potential as a highly specific probe for detection and typing of M. tuberculosis, as well as for transposon mutagenesis of mycobacteria. The sequence of IS986 is virtually identical to that of another recently described element, IS6110 (Thierry et al., 1990).     

Sequence and characteristics of IS900, an insertion element identified in a human Crohn''s disease isolate of Mycobacterium paratuberculosis.

The complete sequence of an insertion element IS900 in Mycobacterium paratuberculosis is reported. This is the first characterised example of a mycobacterial insertion element. IS900 consists of 1451bp of which 66% is G + C. It lacks terminal inverted and direct repeats, characteristic of Escherichia coli insertion elements but shows a degree of target sequence specificity. A single open reading frame (ORF 1197) coding for 399 amino acids is predicted. This amino acid sequence, and to a lesser extent the nucleotide sequence, show significant homologies to IS110, an insertion element of Streptomyces coelicolor A3(2). It is proposed that IS900, IS110, and similar insertion elements recently identified in disease isolates of Mycobacterium avium are members of a phylogenetically related family. IS900 will provide highly specific markers for the precise identification of Mycobacterium paratuberculosis, useful in defining its relationship to animal and human diseases.     

Molecular evidence for independent occurrence of IS6110 insertions at the same sites of the genome of Mycobacterium tuberculosis in different clinical isolates

Several characteristics of Mycobacterium tuberculosis (e.g., conserved genome and low growth rate) have severely restricted the study of the microorganism. The discovery of IS6110 raised hopes of overcoming these obstacles. However, our knowledge of this IS element is relatively limited; even its two basic characteristics (transposition mechanism and target site selection) are far from well understood. In this study, IS6110 insertions in ipl loci (iplA and iplB) in two collections of clinical isolates of M. tuberculosis from different geographic locations, one from Scotland and the other from Thailand, were investigated. Five different IS6110 insertions in the loci were identified: ipl-4::IS6110, ipl-5::IS6110, ipl-11::IS6110, ipl-12::IS6110, and ipl-13::IS6110. An attempt to establish the phylogenetic relationship of the isolates containing these insertions was unsuccessful, suggesting that some of these insertions may have arisen from more than one event. This possibility is further supported by the observation that IS6110 copies existed in the same site but with different orientations in different isolates, and the insertion site of ipl-1::IS6110 harbored IS6110 copies in both iplA and iplB in different strains. All these suggest the independent occurrence of IS6110 insertions at the same sites of the genome of M. tuberculosis in different clinical isolates. The implications of this finding are discussed.     

Validation of qPCR Methods for the Detection of Mycobacterium in New World Animal Reservoirs

Zoonotic pathogens that cause leprosy (Mycobacterium leprae) and tuberculosis (Mycobacterium tuberculosis complex, MTBC) continue to impact modern human populations. Therefore, methods able to survey mycobacterial infection in potential animal hosts are necessary for proper evaluation of human exposure threats. Here we tested for mycobacterial-specific single- and multi-copy loci using qPCR. In a trial study in which armadillos were artificially infected with M. leprae, these techniques were specific and sensitive to pathogen detection, while more traditional ELISAs were only specific. These assays were then employed in a case study to detect M. leprae as well as MTBC in wild marmosets. All marmosets were negative for M. leprae DNA, but 14 were positive for the mycobacterial rpoB gene assay. Targeted capture and sequencing of rpoB and other MTBC genes validated the presence of mycobacterial DNA in these samples and revealed that qPCR is useful for identifying mycobacterial-infected animal hosts.     

Analysis of sequence diversity among IS6110 sequence of Mycobacterium tuberculosis: possible implications for PCR based detection

The IS6110 belongs to the family of insertion sequences (IS) of the IS3 category. This insertion sequence was reported to be specific for Mycobacterium tuberculosis complex and hence is extensively exploited for laboratory detection of the agent of tuberculosis and for epidemiological investigations based on polymerase chain reaction. IS6110 is 1361-bp long and within this sequence different regions have been utilized as targets in the identification of M. tuberculosis by PCR. However, the results are not always consistent, specific and sensitive. In recent years, a few clinical investigations raised concerns over IS6110 specificity and sensitivity in the diagnosis of tuberculosis due to false-positive (homology with other target DNA besides M. tuberculosis) or false negative (due to absence of copies of IS6110) results with IS6110 specific primers. To unravel the variations in IS6110 sequences, an insilico analysis of IS6110 sequence of different strains of M. tuberculosis was carried out. Our results of comparative analysis of IS6110 insertion sequences of M. tuberculosis complex suggests that, IS6110 insertion sequences harbored variations in its sequence, which is evident from the phylogenetic analysis. Importantly, IS6110 sequence has divergence within the copies of same strain and formed different clusters. A list of IS6110 specific primers used in various clinical investigation of tuberculosis was obtained from the literature and their performance scrutinized. Our study emphasizes the need to develop PCR assays (multiplex format) targeting more than one region of the genome of M. tuberculosis.     

Origin, spread and demography of the Mycobacterium tuberculosis complex

The evolutionary timing and spread of the Mycobacterium tuberculosis complex (MTBC), one of the most successful groups of bacterial pathogens, remains largely unknown. Here, using mycobacterial tandem repeat sequences as genetic markers, we show that the MTBC consists of two independent clades, one composed exclusively of M. tuberculosis lineages from humans and the other composed of both animal and human isolates. The latter also likely derived from a human pathogenic lineage, supporting the hypothesis of an original human host. Using Bayesian statistics and experimental data on the variability of the mycobacterial markers in infected patients, we estimated the age of the MTBC at 40,000 years, coinciding with the expansion of "modern" human populations out of Africa. Furthermore, coalescence analysis revealed a strong and recent demographic expansion in almost all M. tuberculosis lineages, which coincides with the human population explosion over the last two centuries. These findings thus unveil the dynamic dimension of the association between human host and pathogen populations.     

Characterization of IS 1110, a highly mobiie genetic element from Mycobacterium avium

A highly mobile Insertion sequence designated IS 1110 was detected in Mycobacterium avium strain LR541 following an observed increase in size of the plasmid pLR20. Genomic libraries of M. avium strains carrying either parental pLR20 or the modified plasmid (pLR20′) were constructed and the sequence of the relevant clones was determined to characterize the insertion sequence and the target region. IS 1110 is a 1457 bp element lacking terminal inverted repeats, and is related to IS900 (from Mycobacterium paratuberculosis), IS901 and IS902 (from M. avium) and to IS116 (from Streptomyces clavuligerus). LR541 carries several copies of IS 1110. Individual colonies from the same plate show differences in Southern blot patterns when tested with an IS1110-derived probe; the ability to detect transposition events in random colonies, without any selection pressure, indicates an exceptionally high degree of mobility, which will be invaluable for transposon mutagenesis. Analyses of M. avium isolates from human, veterinary, and environmental sources showed that IS1110-hybridizing sequences are present in some M. avium isolates but they were not detected in strains of other mycobacterial species. The polymorphism exhibited In M. avium isolates suggests that this element may be useful for molecular epidemiological studies of M. avium infections.     

PCR法快速检测临床标本中结核杆菌DNA

应用聚合酶链反应（ＰＣＲ）快速检测临床标本（脑脊液、胸水、腹水、血、痰液）中的结核杆菌ＤＮＡ,特异性扩增片段１２３ｂｐ,为结核杆菌的特异性重复序列ＩＳ６１１０部分基因。ＰＣＲ检测人型结核杆菌的敏感性达１０ｆｇＤＮＡ。临床标本的ＰＣＲ检测阳性率（２３．３％）明显高于抗酸染色涂片（２．９％）和细菌培养（５．７％）的阳性率（Ｐ〈０．０５）。通过设立对照系统及对扩增产物酶切分析,表明该法无假阴性结果（特异     

Evolutionary relationships among strains of Mycobacterium tuberculosis with few copies of IS6110

Molecular typing of Mycobacterium tuberculosis by using IS6110 shows low discrimination when there are fewer than five copies of the insertion sequence. Using a collection of such isolates from a study of the epidemiology of tuberculosis in London, we have shown a substantial degree of congruence between IS6110 patterns and both spoligotype and PGRS type. This indicates that the IS6110 types mainly represent distinct families of strains rather than arising through the convergent insertion of IS6110 into favored positions. This is supported by identification of the genomic sites of the insertion of IS6110 in these strains. The combined data enable identification of the putative evolutionary relationships of these strains, comprising three lineages broadly associated with patients born in South Asia (India and Pakistan), Africa, and Europe, respectively. These lineages appear to be quite distinct from M. tuberculosis isolates with multiple copies of IS6110.     

Comparative genomics of metabolic pathways in Mycobacterium species: gene duplication, gene decay and lateral gene transfer

The genus Mycobacterium comprises significant pathogenic species that infect both humans and animals. One species within this genus, Mycobacterium tuberculosis, is the primary killer of humans resulting from bacterial infections. Five mycobacterial genomes belonging to four different species (M. tuberculosis, Mycobacterium bovis, Mycobacterium leprae and Mycobacterium avium ssp. paratuberculosis) have been sequenced to date and another 14 mycobacterial genomes are at various stages of completion. A comparative analysis of the gene products of key metabolic pathways revealed that the major differences among these species are in the gene products constituting the cell wall and the gene families encoding the acidic glycine-rich (PE/PPE/PGRS) proteins. Mycobacterium leprae has evolved by retaining a minimal gene set for most of the gene families, whereas M. avium ssp. paratuberculosis has acquired some of the virulence factors by lateral gene transfer.     

Hypervariable loci that enhance the discriminatory ability of newly proposed 15-loci and 24-loci variable-number tandem repeat typing method on Mycobacterium tuberculosis strains predominated by the Beijing family

The newly proposed 15- and 24-loci mycobacterial interspersed repetitive unit (MIRU)-variable-number tandem repeat (VNTR) typing method was evaluated for its ability to differentiate 181 Mycobacterium tuberculosis Beijing family strains. Compared with the original 12-loci MIRU-VNTR typing method, the 15-loci system dramatically improved the discriminatory power for Beijing strains; however, large clusters that could be further differentiated by IS6110 restriction fragment length polymorphism (RFLP) were still obtained. The clonal stability and allelic diversity of a total of 31 VNTR loci were evaluated. VNTRs 3232, 3820, and 4120 were identified as the effective hypervariable VNTR set for the second-line typing of clustered strains following the 15-loci based scheme. Consequently, the discriminatory power of the new scheme (18 loci) equaled that of IS6110 RFLP.     

Comparison of three DNA extraction methods for Mycobacterium bovis, Mycobacterium tuberculosis and Mycobacterium avium subsp. avium

Aims:  To compare three methods for DNA extraction from Mycobacterium bovis , Mycobacterium tuberculosis and Mycobacterium avium subsp. avium .
Methods and Results:  The DNA was extracted from mycobacterial cultures using enzymatic extraction, combined bead beating and enzymatic extraction and cetyltrimethylammonium bromide (CTAB) extraction. The yield and quality of DNA were compared by spectrophotometry, agarose gel electrophoresis, restriction endonuclease analysis and PCR. The combined bead beating and enzymatic extraction method yielded more DNA. However, that method produced some sheared DNA, visible either by agarose gel electrophoresis or by restriction endonuclease analysis. All methods were appropriate for PCR amplification of a 123 bp fragment of IS 6110 in M. bovis and M. tuberculosis , and of a 1700 bp fragment of FR300 region in M. avium avium .
Conclusions:  Combined bead beating and enzymatic extraction method was the most efficient and easy method for extracting DNA from bacteria of the M. tuberculosis complex.
Significance and Impact of the Study:  The results reveal important differences among the DNA extraction methods for mycobacteria, which are relevant for the success of further downstream molecular analysis.     

IS6110-mediated deletion polymorphism in the direct repeat region of clinical isolates of Mycobacterium tuberculosis

This study investigates the phenomenon of IS6110-mediated deletion polymorphism in the direct repeat (DR) region of the genome of Mycobacterium tuberculosis. Clinical isolates and their putative predecessors were compared using a combination of DR region restriction fragment length polymorphism, IS6110 DNA fingerprinting, spoligotyping, and DNA sequencing, which allowed the mapping of chromosome structure and deletion junctions. The data suggest that adjacently situated IS6110 elements mediate genome deletion. However, in contrast to previous reports, deletions appear to be mediated by inversely oriented IS6110 elements. This suggests that these events may occur via mechanisms other than RecA-mediated homologous recombination. The results underscore the important role of IS6110-associated deletion hypervariability in driving M. tuberculosis genome evolution.