Genotyping of Ochrobactrum anthropi by recA-based comparative sequence, PCR-RFLP, and 16S rRNA gene analysis

A recA-PCR restriction fragment length polymorphism assay was developed to study intraspecies variation among Ochrobactrum anthropi. Primers deduced from the known recA gene sequence of the genetically closely related genus Brucella allowed the specific amplification of a 1065 bp recA fragment from each of the 38 O. anthropi and the eight Brucella strains investigated. RecA was also amplified from the type strains of O. intermedium, O. tritici, and O. lupini but could not be generated from O. grignonense and O. gallinifaecis. Subsequent comparative recA sequence- and HaeIII-recA restriction fragment length polymorphism analysis identified nine different genospecies among the tested 38 O. anthropi isolates, whereas the recA sequences of the Brucella spp. were indistinguishable. Furthermore, Brucella spp., O. anthropi, O. intermedium, and O. tritici were clearly separated from each other by means of their recA sequences and HaeIII restriction patterns. Five strains of uncertain species status listed in the Culture Collection University of G?teborg bacterial culture collection as O. anthropi were characterized by recA analysis, and their phylogenetic position within the Brucella-Ochrobactrum group was determined. In summary, recA-sequence analysis provides a new reliable molecular subtyping tool to study the phylogeny of the Ochrobactrum taxon at both the inter- and intraspecies level.     

Genotyping of Chromobacterium violaceum isolates by recA PCR-RFLP analysis

Intraspecies variation of Chromobacterium violaceum was examined by comparative sequence - and by restriction fragment length polymorphism analysis of the recombinase A gene (recA-PCR-RFLP). Primers deduced from the known recA gene sequence of the type strain C. violaceum ATCC 12472(T) allowed the specific amplification of a 1040bp recA fragment from each of the 13 C. violaceum strains investigated, whereas other closely related organisms tested negative. HindII-PstI-recA RFLP analysis generated from 13 representative C. violaceum strains enabled us to identify at least three different genospecies. In conclusion, analysis of the recA gene provides a rapid and robust nucleotide sequence-based approach to specifically identify and classify C. violaceum on genospecies level.     

A general method for cloning recA genes of gram-positive bacteria by polymerase chain reaction.

An internal fragment of the recA gene from eight gram-positive organisms has been amplified by using degenerate primers in a polymerase chain reaction. The internal 348- or 360-bp recA DNA segments from Bacillus subtilis, Clostridium acetobutylicum, Lactobacillus bulgaricus, Lactobacillus helveticus, Leuconostoc mesanteroides, Listeria monocytogenes, Staphylococcus aureus, and Streptococcus salivarus subsp. thermophilus were amplified, cloned, and sequenced. The G + C contents of the DNA from these species range from 28 to 52%. The sequences of the bacterial recA genes show strong relatedness. This method is particularly useful for the recovery of the recA genes of gram-positive bacteria and avoids the difficulties of using a genetic complementation test for cloning.     

Comparative evaluation of bacteria identification from the Acinetobacter genus using a commercially available API 20NE system, PCR and RFLP techniques

A study was carried out for identification of 50 Acinetobacter strains isolated from various clinical materials. Using classic methods the following species were identifies: Acinetobacter sp. (68%), Acinetobacter baumanii (24%) and Acinetobacter lwofii (8%). In all strains the recA gene was found of 435-500 pz size which confirms their belonging to that genus. Amplification products were digested with restriction enzymes Mbol and HinfI (RFLP) and their detection was carried out on agarose gel by electrophoresis methods, owing to that the arrangement of gene fragment characteristic of each strain was obtained. After careful analysis restriction patterns were obtained corresponding to the following genome species: Acinetobacter baumanii (60%), Acinetobacter sp. 3 (28%) and Acinetobacter lwoffii (12%). The methods of molecular biology made possible a more precise classification of the studied strains according to species. Certain strains determined as Acinetobacter sp. by the API 20NE system were found to be Acinetobacter baumanii, Acinetobacter sp. 3 or Acinetobacter lwofii when determined by the PCR/RFLP method.     

Application of recA and rpoB sequence analysis on phylogeny and molecular identification of Geobacillus species

Aims:  Some Geobacillus species have highly similar 16S rRNA gene sequences, making 16S rDNA sequence analysis-based identification problematic. To overcome this limitation, recA and rpoB sequence analysis was evaluated as an alternative for distinguishing Geobacillus species.
Methods and Results:  The phylogram of 16S rRNA gene sequences inferred from the neighbour-joining method showed that nine clusters of Geobacillus species were characterized with bootstrap values >90%. The recA and rpoB sequences of 10 reference strains in clusters V, VIb and VIc were amplified and sequenced using consensus primers. Alignment of recA sequences in clusters V, VIb and VIc revealed three types of recA genes, consistent with the putative amino acid sequences and in vivo recA splicing analysis. The phylogram constructed from rpoB sequences showed more divergence than that constructed from 16S rRNA gene sequences.
Conclusions:  recA and rpoB sequence analysis differentiated closely-related Geobacillus species and provided direct evidence for reclassifying some species dubiously categorized as Geobacilli . Additionally, this study revealed three types of recA genes in the different Geobacillus species.
Significance and Impact of the Study:  This study highlights the advantage of recA and rpoB sequence analysis to supplement 16S rRNA gene sequence analysis for efficient and convenient determination of Geobacillus species.     

Development of a recA gene-based identification approach for the entire Burkholderia genus

Burkholderia is an important bacterial genus containing species of ecological, biotechnological, and pathogenic interest. With their taxonomy undergoing constant revision and the phenotypic similarity of several species, correct identification of Burkholderia is difficult. A genetic scheme based on the recA gene has greatly enhanced the identification of Burkholderia cepacia complex species. However, the PCR developed for the latter approach was limited by its specificity for the complex. By alignment of existing and novel Burkholderia recA sequences, we designed new PCR primers and evaluated their specificity by testing a representative panel of Burkholderia strains. PCR followed by restriction fragment length polymorphism analysis of an 869-bp portion of the Burkholderia recA gene was not sufficiently discriminatory. Nucleotide sequencing followed by phylogenetic analysis of this recA fragment differentiated both putative and known Burkholderia species and all members of the B. cepacia complex. In addition, it enabled the design of a Burkholderia genus-specific recA PCR that produced a 385-bp amplicon, the sequence of which was also able to discriminate all species examined. Phylogenetic analysis of 188 novel recA genes enabled clarification of the taxonomic position of several important Burkholderia strains and revealed the presence of four novel B. cepacia complex recA lineages. Although the recA phylogeny could not be used as a means to differentiate B. cepacia complex strains recovered from clinical infection versus the natural environment, it did facilitate the identification of clonal strain types of B. cepacia, B. stabilis, and B. ambifaria capable of residing in both niches.     

Comparison of ARDRA and recA-RFLP analysis for genomic species identification of Acinetobacter spp.

The genus Acinetobacter is subdivided into genospecies on the basis of DNA relatedness of strains. Phenotypic tests are insufficient to identify the genospecies to which an isolate belongs. The effectiveness of two previously described PCR-based methods for genospeciating Acinetobacter spp. was compared using a group of 32 well-characterised strains representing six genospecies. Amplified ribosomal DNA restriction analysis (ARDRA) correctly identified all 32 strains. Using restriction fragment length polymorphism (RFLP) of recA PCR amplimers, only six of the 32 strains were correctly identified. Heterogeneity in the recA gene sequence was demonstrated within five of the genospecies. ARDRA proved to be a reliable method whereas analysis of recA RFLP profiles did not enable the genospecies of most of the isolates of Acinetobacter spp. to be determined.     

Detection of cultured and uncultured Burkholderia cepacia complex bacteria naturally occurring in the maize rhizosphere

The species composition of a Burkholderia cepacia complex population naturally occurring in the maize rhizosphere was investigated by using both culture-dependent and culture-independent methods. B. cepacia complex isolates were recovered from maize root slurry on the two selective media Pseudomonas cepacia azelaic acid tryptamine (PCAT) and trypan blue tetracycline (TB-T) and subjected to identification by a combination of restriction fragment length polymorphism (RFLP) analysis and species-specific polymerase chain reaction (PCR) tests of the recA gene. DNA extracted directly from root slurry was examined by means of nested PCR to amplify recA gene with species-specific B. cepacia complex primers and to obtain a library of PCR amplified recA genes. Using the culture-dependent method the species Burkholderia cepacia, Burkholderia cenocepacia, Burkholderia ambifaria and Burkholderia pyrrocinia were identified, whereas using the culture-independent method also the species Burkholderia vietnamiensis was detected. The latter method also allowed us to highlight a higher diversity within the B. cenocepacia species. In fact, by using the culture-independent method the species B. cenocepacia recA lineages IIIA and IIID besides B. cenocepacia recA lineage IIIB were detected. Moreover, higher heterogeneity of recA RFLP patterns was observed among clones assigned to the species B. cenocepacia than among B. cenocepacia isolates from selective media.     

recA genotyping of Salmonella enteritidis phage type 4 isolates by restriction fragment length polymorphism analysis

AIMS: To subtype Salmonella enteritidis phage type 4 isolates by using recA genotyping. METHODS AND RESULTS: Random amplified polymorphic DNA analysis using a primer ERIC2 of 76 isolates of Salmonella enteritidis phage type 4 obtained in Northern Ireland in 1998 and in 1999 demonstrated the presence of five genotypes. Restriction fragment length polymorphism analysis, using a degenerate primer pair designed to amplify a segment (about 640 bp in length) of the recA gene from several members of the Enterobacteriaceae with restriction enzymes, HhaI and Sau3AI, showed that the resulting fragments could differentiate the isolates into three groups, respectively. CONCLUSION: recA gene amplification and HhaI and Sau3AI restriction digestion was demonstrated to increase the differentiating power between isolates of Salmonella enteritidis phage type 4 by combining the patterns of the random amplified polymorphic DNA analysis procedure using a primer ERIC2. Significance and Impact of the Study: A novel restriction fragment length polymorphism assay for isolates of Salmonella enteritidis phage type 4, based on the amplification of the recA gene was attained and its comparison and its combination with random amplified polymorphic DNA analysis was provided.     

Novel structure of the recA locus of Mycobacterium tuberculosis implies processing of the gene product.

A fragment of Mycobacterium tuberculosis DNA containing recA-like sequences was identified by hybridization with the Escherichia coli recA gene and cloned. Although no expression was detected from its own promoter in E. coli, expression from a vector promoter partially complemented E. coli recA mutants for recombination, DNA repair, and mutagenesis, but not for induction of phage lambda. This clone produced a protein which cross-reacts with antisera raised against the E. coli RecA protein and was approximately the same size. However, the nucleotide sequence of the cloned fragment revealed the presence of an open reading frame for a protein about twice the size of other RecA proteins and the cloned product detected by Western blotting (immunoblotting). The predicted M. tuberculosis RecA protein sequence was homologous with RecA sequences from other bacteria, but this homology was not dispersed; rather it was localized to the first 254 and the last 96 amino acids, with the intervening 440 amino acids being unrelated. Furthermore, the junctions of homology were in register with the uninterrupted sequence of the E. coli RecA protein. Identical restriction fragments were found in the genomic DNAs of M. tuberculosis H37Rv and H37Ra and of M. bovis BCG. It is concluded that the ancestral recA gene of these species diversified via an insertional mutation of at least 1,320 bp of DNA. Possible processing mechanisms for synthesizing a normal-size RecA protein from this elongated sequence are discussed.     

低温菌启动子探针质粒的构建

为了在宿主菌Acinetobacter sp.DWC6中构建低温菌蛋白表达载体,以pBR322质粒为基础,去除质粒上β-内酰胺酶基因的启动子片段,取而代之为来源于质粒pJRD215的卡那霉素抗性基因片段,并在pBR322中插入Acinetobacter菌属特异性ori的DNA片段,构建了能在Acinetobacter sp.DWC6和E.coli中正常复制的启动子探针质粒pBAP1。通过在质粒pBAP1中的β-内酰胺酶基因上游随机导入Acinetobacter sp.DWC6基因组片段,通过检测宿主细胞的氨苄青霉素抗性和β-内酰胺酶活性,来筛选强启动子片段,并分析了启动子探针质粒载体的功能及启动子的强度。     

In vivo inactivation of the Streptococcus mutans recA gene mediated by PCR amplification and cloning of a recA DNA fragment.

The inactivation of the RecA protein in pathogenic oral streptococci would facilitate genetic analysis of potential virulence factors in these strains. Comparison of recA nucleotide (nt) sequences from a number of bacteria has suggested that two regions of highly conserved RecA amino acid (aa) sequence could be used as a basis for synthesizing degenerate oligodeoxyribonucleotide primers with which to amplify recA homologues from the streptococci. Accordingly, primer mixtures were used to amplify a 693-bp fragment of the Streptococcus mutans chromosome by PCR. The amplified fragment was cloned and its identity confirmed via hybridization to an Escherichia coli recA gene probe and by nt sequence determination. The recA homologue fragment from S. mutans GS-5 was 63% and 75% homologous to the deduced aa sequences of the E. coli and Bacillus subtilis RecA enzymes, respectively. The S. mutans recA fragment was mutagenized in vitro via insertional inactivation and returned to the chromosome using allelic exchange. The resulting strains of S. mutans were shown to be substantially more sensitive to UV irradiation than the wild-type strain. Further, the ability to incorporate linear markers into the chromosome was abolished in putative S. mutans recA strains, thus indicating the functional inactivation of RecA in these microorganisms.     

Comparative sequence analysis of the tuf and recA genes and restriction fragment length polymorphism of the internal transcribed spacer region sequences supply additional tools for discriminating Bifidobacterium lactis from Bifidobacterium animalis

The relationship between Bifidobacterium lactis and Bifidobacterium animalis was examined by comparative analysis of tuf and recA gene sequences and by restriction fragment length polymorphism analysis of their internal 16S-23S transcribed spacer region sequences. The bifidobacterial strains investigated could be divided into two distinct groups within a single species based on the tuf, recA, and 16S-23S spacer region sequence analysis. Therefore, all strains of B. lactis and B. animalis could be unified as the species B. animalis and divided into two subspecies, Bifidobacterium animalis subsp. lactis and Bifidobacterium animalis subsp. animalis.     

PCR differentiation of seventeen genospecies of Acinetobacter

Abstract In the present study, strains of 17 reference Acinetobacter genospecies were investigated by using the polymerase chain reaction (PCR). We used primers to amplify spacer regions between the 16S and 23S genes in the prokaryotic rRNA genetic loci. When the spacer amplification products were resolved by electrophoresis, the resulting patterns could be used to distinguish all of the tested acinetobacters into 15 groups. The genospecies 5 ( Acinetobacter junii ), 7 ( Acinetobacter johnsonii ) and 10 produced the same characteristic PCR patterns, suggesting the identity of these three genospecies. A preliminary evaluation of the proposed scheme for PCR diagnostics was carried out. Using the proposed scheme, tested clinical strains were identified correctly to the genospecies level, and the identifications confirmed by conventional biochemical tests. On the basis of our results, PCR amplification of the 16S–23S spacer region shows significant promise as a tool for the simple identification of genospecies belonging to Acinetobacter sp. The nucleotide sequences of our primers are sufficiently highly conserved among these organisms as to permit PCR reactions to be carried out with a single set of reaction conditions and amplification parameters irrespective of species or genus.     

Identification, isolation and sequencing of the recA gene of Streptomyces lividans TK24

Abstract An internal fragment of the recA gene of Streptomyces cattleya was amplified by the polymerase chain reaction (PCR) employing degenerate oligonucleotide primers. Using this fragment as a hybridization probe, a recA homologous gene could be shown in each tested Streptomyces strain. A 4.4 kb Bam HI fragment which carried the complete recA gene was isolated from Streptomyces lividans TK24. Sequence analysis suggested that the coding region of the recA gene consists of 1122 bp. The highest similarity (∼78%) could be detected to the recA genes of Mycobacterium tuberculosis and Mycobacterium leprae . After fusion with an E. coli promoter the S. lividans recA gene could partially complement an Escherichia coli recA mutant.     

Use of degenerate primers for polymerase chain reaction cloning and sequencing of the Lactococcus lactis subsp. lactis recA gene.

Two particularly well-conserved stretches in the RecA protein sequences were chosen as templates to synthesize degenerate oligonucleotides, which were used in polymerase chain reaction to amplify an internal recA DNA fragment of Lactococcus lactis subsp. lactis ML3. Using this fragment, we recovered and sequenced the entire lactococcal recA gene. The end of an open reading frame present upstream of the recA gene shows strong homology with formamidopyrimidine-DNA-glycosylase, a protein involved in DNA repair.     

Use of degenerate primers for polymerase chain reaction cloning and sequencing of the Lactococcus lactis subsp. lactis recA gene.

Two particularly well-conserved stretches in the RecA protein sequences were chosen as templates to synthesize degenerate oligonucleotides, which were used in polymerase chain reaction to amplify an internal recA DNA fragment of Lactococcus lactis subsp. lactis ML3. Using this fragment, we recovered and sequenced the entire lactococcal recA gene. The end of an open reading frame present upstream of the recA gene shows strong homology with formamidopyrimidine-DNA-glycosylase, a protein involved in DNA repair.     

Identification and differentiation of Heterotardigrada and Eutardigrada species by riboprinting

In the last decades, the number of known tardigrade species has considerably increased to more than 960 species with new ones being discovered every year. However, the study of tardigrade species presents a general problem which is frequently encountered during the work with invertebrates: small size and remarkable degrees of phenotypic plasticity may sometimes not permit a definite identification of the species. In this investigation we have used riboprinting, a tool to study rDNA sequence variation, in order to distinguish tardigrade species from each other. The method combines a restriction site variation approach of ribotyping with amplified DNAs. In eight investigated species of heterotardigrades and eutardigrades we have amplified the genes for the small subunit ribosomal RNA (SSU; 18S) and subsequently sequenced the genes. Virtual riboprints were used for identification of restriction sites from ten already published 18S rDNA sequences and seven new 18S rDNA sequences. On the basis of the obtained sequences, diagnostic restriction fragment patterns can be predicted with only 11 restriction enzymes. The virtual digestion confirmed the obtained restriction fragment patterns and restriction sites of all amplified and digested tardigrade DNAs. We show that the variation in positions and number of restriction sites obtained by standard restriction fragment analysis on agarose gels can be used successfully for taxonomic identification at different taxonomic levels. The simple restriction fragment analysis provides a fast and convenient method of molecular barcoding for species identification in tardigrades.     

Genotypic identification of rickettsiae and estimation of intraspecies sequence divergence for portions of two rickettsial genes.

DNA sequences from specific genes, amplified by the polymerase chain reaction technique, were used as substrata for nonisotopic restriction endonuclease fragment length polymorphism differentiation of rickettsial species and genotypes. The products amplified using a single pair of oligonucleotide primers (derived from a rickettsial citrate synthase gene sequence) and cleaved with restriction endonucleases were used to differentiate almost all recognized species of rickettsiae. A second set of primers was used for differentiation of all recognized species of closely related spotted fever group rickettsiae. The procedure circumvents many technical obstacles previously associated with identification of rickettsial species. Multiple amplified DNA digest patterns were used to estimate the intraspecies nucleotide sequence divergence for the genes coding for rickettsial citrate synthase and a large antigen-coding gene of the spotted fever group rickettsiae. The estimated relationships deduced from these genotypic data correlate reasonably well with established rickettsial taxonomic schemes.     

Population genetics and phylogenetic inference in bacterial molecular systematics: the roles of migration and recombination in Bradyrhizobium species cohesion and delineation

A combination of population genetics and phylogenetic inference methods was used to delineate Bradyrhizobium species and to uncover the evolutionary forces acting at the population-species interface of this bacterial genus. Maximum-likelihood gene trees for atpD, glnII, recA, and nifH loci were estimated for diverse strains from all but one of the named Bradyrhizobium species, and three unnamed "genospecies," including photosynthetic isolates. Topological congruence and split decomposition analyses of the three housekeeping loci are consistent with a model of frequent homologous recombination within but not across lineages, whereas strong evidence was found for the consistent lateral gene transfer across lineages of the symbiotic (auxiliary) nifH locus, which grouped strains according to their hosts and not by their species assignation. A well resolved Bayesian species phylogeny was estimated from partially congruent glnII+recA sequences, which is highly consistent with the actual taxonomic scheme of the genus. Population-level analyses of isolates from endemic Canarian genistoid legumes based on REP-PCR genomic fingerprints, allozyme and DNA polymorphism analyses revealed a non-clonal and slightly epidemic population structure for B. canariense isolates of Canarian and Moroccan origin, uncovered recombination and migration as significant evolutionary forces providing the species with internal cohesiveness, and demonstrated its significant genetic differentiation from B. japonicum, its sister species, despite their sympatry and partially overlapped ecological niches. This finding provides strong evidence for the existence of well delineated species in the bacterial world. The results and approaches used herein are discussed in the context of bacterial species concepts and the evolutionary ecology of (brady)rhizobia.