Biosorption of textile dyes by biomass derived from Kluyveromyces marxianus IMB3

Since it had previously been found that biomass derived from the thermotolerant ethanol-producing yeast strain Kluyveromyces marxianus IMB3 exhibited a relatively high affinity for heavy metals it was decided to determine whether or not it might be capable of textile dye biosorption. To this end, biosorption isotherm analysis was carried out using the biomass together with commonly-used textile dyes including Remazol Black B, Remazol Turquoise Blue, Remazol Red, Remazol Golden Yellow and Cibacron Orange. Although the dyes Remazol Black B, Remazol Turquoise Blue and Remazol Red adhered to the Langmuir model, the remaining dyes failed to do so. The observed biosorption capacities at equilibrium dye concentrations of 100?mg/l were compared and it was found that the biomass exhibited a significant affinity for each dye. The potential use of this biosorptive material in the bioremediation of textile processing effluents is discussed.     

Contributions of functional groups and extracellular polymeric substances on the biosorption of dyes by aerobic granules

The contributions of loosely bound extracellular polymeric substances (LB-EPS), tightly bound EPS (TB-EPS), residual sludge (the sludge left after EPS extraction) and functional groups such as amine, carboxyl, phosphate and lipid on aerobic granules on biosorption of four different dyes (Reactive Brilliant Blue KN-R (KN-R), Congo Red (CR), Reactive Brilliant Red K-2G (RBR) and Malachite Green (MG)) were investigated. EPS may be responsible for biosorption of cationic dyes. However, residual sludge always made greater contribution than that of EPS. The biosorption mechanisms were dependent on the functional groups on aerobic granules and dyes’ chemical structures. The lipid and phosphate groups might be the main binding sites for KN-R biosorption. Amine, carboxyl, phosphate and lipid were all responsible for the binding of CR. The lipid fractions played an important role for RBR biosorption. For MG, the phosphate groups gave the largest contribution.     

Biosorption of anionic textile dyes by nonviable biomass of fungi and yeast

The nonviable biomass of Aspergillus niger, Aspergillus japonica, Rhizopus nigricans, Rhizopus arrhizus, and Saccharomyces cerevisiae were screened for biosorption of textile dyes. The selected anionic reactive dyes were C.I. Reactive Black 8, C.I. Reactive Brown 9, C.I. Reactive Green 19, C.I. Reactive Blue 38, and C.I. Reactive Blue 3. Experiments were conducted at initial dye concentration of 50, 100, 150 and 200mg/L. The effect of initial dye concentration, dose of biosorbent loading, temperature, and pH on adsorption kinetics was studied. S. cerevisiae and R. nigricans were good biosorbents at initial dye concentration of 50mg/L, 1g% (w/v) biomass loading and 29+/-1 degrees C. R. nigricans adsorbed 90-96% dye in 15min, at 20 degrees C and pH 6.0. The data showed an optimal fit to the Langmuir and Freundlich isotherms. The maximum uptake capacity (Q(o)) for the selected dyes was in the range 112-204mg/g biomass.     

Kinetic modeling for the biosorption of copper by pretreated Aspergillus niger biomass

In this present work, a kinetic model for biosorption of copper was developed considering the possibility of different forms of functional groups being present on the surface of the biomass prepared from Aspergillus niger. Results showed that metal uptake by A. niger was a mass transfer driven process, requiring only 30min to achieve 70% adsorption efficiency. Copper sorption by A. niger was influenced by the biomass dose, initial metal ion concentration, and pH of the solution. The Langmuir and Freundlich adsorption isotherms were used to describe the behavior of the system at different pH. The retention capacity of the biomass was determined at pH 6.0 to be equal to 23.62mg/g of biomass. The pretreatment with formalin improved the uptake of metal ion.     

Evaluation of azo dyes degradation potential of fungal strains and their role in wastewater treatment

In the present investigation, two fungal strains were exploited to evaluate their degradation capability on Synozol Red, Yellow, and Navy-Blue dyes which gave the utmost decolorization such as 40%, 70%, 90% by Aspergillus niger, and 36%, 73%, 87% by Trichoderma viride, respectively for 60 days. The Gas Chromatography-Mass Spectrometry (GC–MS) analysis of the decolorized dyes suggested that various compounds such as Caprolactam, Furazan-3-carboxamide, oxime, 4-amino-N, N-dimethyl, 6H-Pyrazolo[1,2-a] [1,2,4,5]tetrazine, Hexahydro-2,3-dimethyl, Benzene, 1-propenyl, Dihydroxymaleic acid, Arsenous acid, tris(trimethylsilyl) ester were produced by the fungi which helped in the removal of dyes from the wastewater. The laccase activity of the degraded dyes was proof that both of the strains positively produced the enzyme that helped in the biodegradation of carcinogenic dyes into less harmful products. The A. niger extracted laccase relative activity was 262%, 265%, and 145.7% for Synozol Yellow, Synozol Red, and Navy Blue, respectively. Similarly, laccase, obtained from T. viride, showed relative activity of 187.5% against Synozol Yellow, 215% against Synozol Red, and 202% against Navy Blue. Furthermore, the supernatant extracted from fungi-decolorized wastewater was used to check phytotoxicity on Vigna radiata, which gave excellent results. Both fungal strains, on the basis of their dye degradation potential, can be used to ameliorate wastewater contaminated with azo dyes.     

Biosorption of three textile dyes from contaminated water by filamentous green algal Spirogyra sp.: Kinetic,isotherm and thermodynamic studies

A freshwater filamentous green alga Spirogyra sp. was used as an inexpensive and efficient biosorbent for the removal of C.I. Acid Orange 7 (AO7), C.I. Basic Red 46 (BR46) and C.I. Basic Blue 3 (BB3) dyes from contaminated water. The effects of various physico–chemical parameters on dye removal efficiency were investigated, e.g. contact time, pH, initial dyes concentration, the amount of alga, temperature and biosorbent particle size. Dyes biosorption was a quick process and reactions reached to equilibrium conditions within 60 min. The biosorption capacity of three dyes onto alga was found in the following order: BR46 > BB3> AO7. The values of thermodynamic parameters, including ΔG, ΔH and ΔS, indicated that the biosorption of the dyes on the dried Spirogyra sp. biomass was feasible, spontaneous and endothermic. The pseudo-first order, pseudo-second order and the intraparticle diffusion models were applied to the experimental data in order to kinetically describe the removal mechanism of dyes, with the second one showing the best fit with the experimental kinetic biosorption data (R² = 0.99). It was also found that the adsorption process followed the Freundlich isotherm model with the highest value of correlation coefficients (0.99) and the biosorption capacity being estimated to be 13.2, 12.2 and 6.2 mg g⁻¹ for BR46, BB3 and AO7, respectively.     

Competitive biosorption of Acid Blue 25 and Acid Red 337 onto unmodified and CDAB-modified biomass of Aspergillus oryzae

The performance of unmodified and cetyldimethylethyl ammonium bromide (CDAB) modified nonviable Aspergillus oryzae for removal of Acid Blue 25 (AB 25) and Acid Red 337 (AR 337) was investigated in single and binary systems. In single system, the biosorption capacities of CDAB-modified biosorbent reached 160.36 and 280.39 mg g⁻¹ for AB 25 and AR 337, respectively, which were 1.52 and 1.66 times higher than that of unmodified biosorbent. In binary system, the biosorption capacities of unmodified and CDAB-modified biosorbents for both dyes decreased significantly compared to that in single system. Relative competitiveness analysis demonstrated that there existed critical initial concentration ratio which determined the predominance of dyes during biosorption process. The biosorption of AB 25 was found to be in dominant position at initial concentration ratio of [AB 25]/[AR 337] above 0.63. Kinetic analysis indicated that intraparticle diffusion was the limiting step for biosorption of two dyes onto biosorbents.     

Biosorption of Basic Blue 7 by fungal cells immobilized on the green-type biomatrix of Phragmites australis spongy tissue

Biosorption is an effective alternative method for the control of water pollution caused by different pollutants such as synthetic dyes and metals. A new and efficient biomass system was developed from the passively immobilized fungal cells. The spongy tissue of Phragmites australis was considered as the carrier for the immobilization of Neurospora sitophila cells employed for the biosorption of Basic Blue 7. This plant tissue was used for the first time as a carrier for fungal cells. The biosorption was examined through batch- and continuous-mode operations. The biosorption process conformed well to the Langmuir model. Maximum monolayer biosorption capacity of the biosorbent was recorded as 154.756 mg g^?1. Kinetic findings showed a very good compliance with the pseudo-second-order model. The negative values of ΔG° indicated a spontaneous nature of the biosorption process and a positive value of ΔH° (14.69 kJ mol^?1) concluded favorable decolorization at high temperature. The scanning electron microscopy analysis showed that a porous, rippled, and rough surface of biomass system was covered with BB7 molecular cloud. IR results revealed that functional groups like –OH, –NH, and C?O participated to the decolorization. Breakthrough and exhausted points were found as 360 and 570 minutes, respectively. The biomass system was successfully applied to the treatment of real wastewater.     

一株高效广谱染料降解细菌的分离鉴定及脱色特性研究

通过梯度驯化,从印染废水长期污染土壤中分离筛选出能以4种不同结构类型的染料(刚果红、美蓝、孔雀绿和活性艳蓝KN-R)为唯一碳源的菌株XSMR,根据其形态学特征和生理生化鉴定及16S rDNA序列分析,初步鉴定为无色杆菌属(Achromobacter sp.)的菌株。菌株XSMR对4种染料均具有强的脱色降解能力,且对染料脱色的同时,自身能够生长繁殖,培养24h菌体干重超过不加染料的对照。在振荡培养条件下对该菌株的脱色反应条件进行研究,结果表明,当刚果红、美蓝、孔雀绿及活性艳蓝KN-R的初始浓度分别小于200mg/L、200mg/L、150mg/L及150mg/L时,在pH7.5、温度35℃、接种量4%(V/V)条件下,接种菌株XSMR脱色14h对4种染料的脱色率均可达到98%以上。通过对降解产物的紫外-可见光谱分析,进一步证明了菌株XSMR能彻底降解染料。菌株XSMR对染料脱色的机理包括生物降解和菌株吸附两方面。     

Integrating photobiological hydrogen production with dye-metal bioremoval from simulated textile wastewater

The study reports production of hydrogen in photobioreactors with free (PBR_Fr) and immobilized (PBR_Imm) Nostoc biomass at enhanced and sustained rates. Before running the photobioreactors, effects of different immobilization matrices and cyanobacterial dose on hydrogen production were studied in batch mode. As hydrogen production in the PBRs declined spent biomass from the photobioreactors were collected and utilized further for column biosorption of highly toxic dyes (Reactive Red 198 + Crystal Violet) and metals (hexavalent chromium and bivalent cobalt) from simulated textile wastewater. Breakthrough time, adsorption capacity and exhaustion time of the biosorption column were studied. The photobioreactors with free and immobilized cyanobacterium produced hydrogen at average rates of 101 and 151 μmol/h/mg Chl a, respectively over 15 days, while the adsorption capacity of the spent biomass was up to 1.4 and 0.23 mg/g for metals and 15 and 1.75 mg/g for the dyes, respectively in continuous column mode.     

Biosorption of pentachlorophenol from aqueous solutions by a fungal biomass

This study focuses on the use of non-viable Aspergillus niger biomass, for the biosorption of pentachlorophenol (PCP) from aqueous solutions. Various forms of the biomass-autoclaved and chemically conditioned, were tested for their potential in the removal of PCP from aqueous solutions. It was found that PCP removal was pH dependent; PCP removal decreased with the increase in pH for all type of biomass, except for cetyltrimethylammonium bromide (CTAB) biomass. For CTAB biomass, a near complete removal of PCP was observed at all pHs. Therefore, CTAB biomass was used in further studies. PCP removal was rapid, with an equilibrium time of 2h. The rate of adsorption kinetics was well described by a pseudo-second order model. Isotherm models of the type one and two parameter models were found to fit the isotherm data. PCP biosorption was found to be exothermic in nature; the amount of PCP sorbed decreased with an increase in temperature. Desorption was carried out using deionized water, dilute HCl and dilute NaOH, and it was found that most of the PCP was irreversibly bound to the biomass. The addition of inorganic salts did not affect the removal of PCP from aqueous solutions. Among the surface functional groups present on the biomass, carboxyl, amide and hydroxyl groups seem to have played a role in PCP biosorption. It was concluded that CTAB treated biomass was an excellent adsorbent for the removal of PCP from aqueous solutions.     

Bioaccumulation and biosorption of chromium by Aspergillus niger MTCC 2594

Chromium toxicity is of prime concern due to chrome tanning processes in the leather sector. Chrome tanning results in the discharge of toxic levels of chromium causing pollution hazards. Chromium levels of Cr(III) and Cr(VI) were high above permissible limits in chrome samples after chrome tanning. The potential of Aspergillus niger MTCC 2594 to accumulate chromium as well as its biosorption capacity is investigated in this study. Bioaccumulation of Cr(III) and Cr(VI) in the spent chrome liquor has resulted in a 75-78% reduction of the initial Cr content in 24-36 h. A. niger biomass is found to be very effective in the biosorption of Cr(III) and Cr(VI) in spent chrome liquor. Maximum adsorption of 83% for biosorption of Cr(III) at 48 h and 79% of Cr(VI) at 36 h in spent chrome liquor is observed. The biosorption characteristics fit well with Langmuir and Freundlich isotherms and the adsorption parameters are evaluated. The biosorption of Cr also follows Lagergren kinetics. A. niger biomass is effectively used for the biosorption of chromium with 79-83% Cr removal in 36-48 h.     

Comparison of static and shake culture in the decolorization of textile dyes and dye effluents byPhanerochœte chrysosporium

Decolorization of several dyes (Red HE-8B, Malachite Green, Navy Blue HE-2R, Magenta, Crystal Violet) and an industrial effluent with growing cells ofPhanerochœte chrysosporium in shake and static culture was demonstrated. All the dyes and the industrial effluent were decolorized to some extent with varying percentages of decolorization (20–100%). The rate of decolorization was very rapid with Red HE-8B, an industrial dye. Decolorization rates for all the dyes in static condition were found to be less than the shake culture and also dependent on biomass concentration.     

Mutagenicity of selected sulfonated azo dyes in the Salmonella/microsome assay: use of aerobic and anaerobic activation procedures

A selection of 16 sulfonated azo dyes of both the monoazo type and diazo dyes based on benzidine, o-tolidine and o-dianisidine were assayed for mutagenicity in Salmonella typhimurium strains TA98 and TA100 employing both aerobic and anaerobic preincubation procedures. 3 food dyes, FD & C Red No. 40 and Yellows No. 5 and No. 6 were non-mutagenic in all tests. 5 dyes were mutagenic with aerobic treatment (trypan blue, Pontacyl Sky Blue 4BX, Congo Red, Eriochrome Blue Black B, dimethylaminoazobenzene) and 6 were mutagenic aerobically with riboflavin and cofactors (Deltapurpurin, trypan blue, Pontacyl Sky Blue 4BX, Congo Red, methyl orange, Ponceau 3R). Anaerobic preincubation involving enzymatic reduction of the dyes led to a different pattern of mutagenicity, with trypan blue giving much enhanced mutagenicity; Eriochrome Blue Black B, Pontacyl Sky Blue 4BX, Deltapurpurin and Congo Red exhibiting similar activity to aerobic preincubation; and methyl orange and Ponceau 3R yielding no mutagenicity. The results are interpreted with respect to an hypothesis involving partial reduction of the azo bond under differing degrees of aerobiosis via azo-anion radicals and hydrazo intermediates.     

Surface modification of Corynebacterium glutamicum for enhanced Reactive Red 4 biosorption

This study reports the possibility of enhancing the reactive dye biosorption capacity of Corynebacterium glutamicum via its cross-linking with polyethylenimine (PEI). The amine groups in the cell wall of C. glutamicum were found to electrostatically interact with reactive dye anions. Thus, cross-linking the biomass with PEI enhanced the primary and secondary amine groups, thereby increased the biosorption of reactive dye. The pH edge experiments revealed that acidic conditions, due to protonation of the amine groups, were found to favor Reactive Red 4 (RR 4) biosorption. According to the Langmuir model, the PEI-modified C. glutamicum recorded a maximum RR 4 uptake capacity of 485.1mg/g compared to 171.9 mg/g of the raw C. glutamicum. The kinetic experiments revealed that chemical modification decreased the rate of biosorption. Desorption was successful at pH 9, with the biomass successfully regenerated and reused over four cycles.     

Mechanism of Biosorption of Heavy Metals by Mucor rouxii

Fungi such as Aspergillus niger and Mucor rouxii are capable of removing heavy metals from aqueous solutions. The role various functional groups play in the cell wall of M. rouxii in metal biosorption of lead, cadmium, nickel and zinc was investigated in this paper. The biomass was chemically treated to modify the functional carboxyl, amino and phosphate groups. These modifications were examined by means of infrared spectroscopy. It was found that an esterification of the carboxyl groups and phosphate and a methylation of the amine groups significantly decreased the biosorption of the heavy metals studied. Thus, the carboxylate, amine and phosphate groups were recognized as important in the biosorption of metal ions by M. rouxii biomass. The role the lipids fraction play was not significant. The study showed that Na, K, Ca and Mg ions were released from the biomass after biosorption of Pb, Cd, Ni and Zn, indicating that ion exchange was a key mechanism in the biosorption of metal ions by M. rouxii biomass.     

Redox-mediated decolorization of Direct Red 23 and Direct Blue 80 catalyzed by bioaffinity-based immobilized tomato (Lycopersicon esculentum) peroxidase

The aim of this study was to investigate the role of concanavalin A (Con A)-cellulose-bound tomato peroxidase for the decolorization of direct dyes. Cellulose was used as an inexpensive material for the preparation of bioaffinity support. Con A-cellulose-bound tomato peroxidase exhibited higher efficiency in terms of dye decolorization as compared to soluble enzyme under various experimental conditions. Both Direct Red 23 and Direct Blue 80 dyes were recalcitrant to the action of enzyme without a redox mediator. Six compounds were investigated for redox-mediating property. Immobilized peroxidase decolorized both dyes to different extent in the presence of all the used redox mediators. However, 1-hydroxybenzotriazole emerged as a potential redox mediator for tomato peroxidase catalyzed decolorization of direct dyes. These dyes were maximally decolorized at pH 6.0 and 40 degrees C by soluble and immobilized peroxidase. The absorption spectra of the untreated and treated dyes exhibited a marked difference in the absorption at various wavelengths. Immobilized tomato peroxidase showed a lower Michaelis constant than the free enzyme for both dyes. Soluble and immobilized tomato peroxidase exhibited significantly higher affinity for Direct Red 23 compared to Direct Blue 80.     

Affinity chromatography on immobilised triazine dyes. Studies on the interaction with multinucleotide-dependent enzymes

A systematic investigation into the interaction of several triazinyl dyes with two enzymes from purine metabolism, IMP dehydrogenase (IMP: NAD+ oxidoreductase, EC 1.2.1.14( and adenylosuccinate synthetase (IMP: L-aspartate ligase (GDP-forming), EC 6.3.4.4) has been conducted. Evidence from kinetic inhibition studies, enzyme inactivation with specific affinity labels and specific elution techniques from agarose-immobilised dyes indicate that triazine dyes such as Procion Blue H-B (Cibacron Blue F3G-A), Red HE-3B and Red H-3B are able to differentiate between the nucleotide-binding sites of these enzymes. This information has been exploited to design specific elution techniques for the purification of these enzymes by affinity chromatography.