Amino acid sequence of [2Fe-2S] ferredoxin from Clostridium pasteurianum

The complete amino acid sequence of the [2Fe-2S] ferredoxin from the saccharolytic anaerobe Clostridium pasteurianum has been determined by automated Edman degradation of the whole protein and of peptides obtained by tryptic and by staphylococcal protease digestion. The polypeptide chain consists of 102 amino acids, including 5 cysteine residues in positions 11, 14, 24, 56, and 60. The sequence has been analyzed for hydrophilicity and for secondary structure predictions. In its native state the protein is a dimer, each subunit containing one [2Fe-2S] cluster, and it has a molecular weight of 23,174, including the four iron and inorganic sulfur atoms. The extinction coefficient of the native protein is 19,400 M-1 cm-1 at 463 nm. The positions of the cysteine residues, four of which are most probably the ligands of the [2Fe-2S] cluster, on the polypeptide chain of this protein are very different from those found in other [2Fe-2S] proteins, and in other ferredoxins in general. In addition, whole sequence comparisons of the [2Fe-2S] ferredoxin from C. pasteurianum with a number of other ferredoxins did not reveal any significant homologies. The likely occurrence of several phylogenetically unrelated ferredoxin families is discussed in the light of these observations.     

Primary structure of the two (4 Fe-4 S) clusters ferredoxin from Desulfovibrio desulfuricans (strain Norway 4)

The primary structure of a ferredoxin isolated from D. desulfuricans Norway strain, which we called ferredoxin II (Fd II) has been elucidated. This ferredoxin is a dimer constituted of two identical subunits of molecular weight 6000. In ferredoxin II two (4 Fe-4 S) centers are present per subunit instead of one (Fe-S) center as is the case for the other ferredoxins isolated from Desulfovibrio and for Fd I from the same organism. The comparison of amino-acid sequences shows that ferredoxin II presents more homologies with clostridial type ferredoxin than with the ferredoxins from D. gigas and D. africanus.     

The solution structure of a [3Fe-4S] ferredoxin: oxidised ferredoxin II from Desulfovibrio gigas

The use of standard 2D NMR experiments in combination with 1D NOE experiments allowed the assignment of 51 of the 58 spin systems of oxidised [3Fe-4S] ferredoxin isolated from Desulfovibrio gigas. The NMR solution structure was determined using data from 1D NOE and 2D NOESY spectra, as distance constraints, and information from the X-ray structure for the spin systems not detected by NMR in torsion angle dynamics calculations to produce a family of 15 low target function structures. The quality of the NMR family, as judged by the backbone r.m.s.d. values, was good (0.80?Å), with the majority of φ/ψ angles falling within the allowed region of the Ramachandran plot. A comparison with the X-ray structure indicated that the overall global fold is very similar in solution and in the solid state. The determination of the solution structure of ferredoxin II (FdII) in the oxidised state (FdII_ox) opens the way for the determination of the solution structure of the redox intermediate state of FdII (FdII_int), for which no X-ray structure is available.     

Amino acid sequence of ferredoxin I from Desulfovibrio vulgaris Miyazaki

The amino acid sequence of ferredoxin (Fd) I, purified from Desulfovibrio vulgaris Miyazaki, has been established. Fd I is strikingly similar to Fd III of D. africanus Benghazi with 84% homology. Both have the sequence, -Cys-x-x-Asp-x-x-Cys-x-x-x-Cys-Pro- in the N-terminal half, and the sequence, -Cys-x-x-Cys-x-x-Cys-x-x-x-Cys-Glu- in the C-terminal half of the molecule, instead of the common sequences for ligation to the usual [4Fe-4S] clusters. Fd I has 76% homology to Fd II of D. desulfuricans Norway.     

Amino acid sequence of Desulfovibrio gigas ferredoxin: revisions

Reexamination of the amino acid sequence of $\text{Desulfovibrio}$$\text{gigas}$ ferredoxin revealed that the sequence published in 1971 should be revised. This sequence was determined using automatic protein sequencer in liquid phase and in solid phase. Peptides derived from tryptic hydrolysis, $\text{Staphylococcus}$$\text{aureus}$ protease hydrolysis, cyanogen bromide cleavage were used to construct the total sequence. This ferredoxin contains 6 cysteines per minimum molecular weight of 6,400. 4 cysteines are linked to a (4 Fe-4 S) cluster and the two others possibly participate in a disulfide bridge.     

Purification and characterization of cytochrome c3, ferredoxin, and rubredoxin isolated from Desulfovibrio desulfuricans Norway.

Different electron carriers of the non-desulfoviridin-containing, sulfate-reducing bacterium Desulfovibrio desulfuricans (Norway strain) have been studied. Two nonheme iron proteins, ferredoxin and rubredoxin, have been purified. This ferredoxin contains four atoms of non-heme iron and acid-labile sulfur and six residues of cysteine per molecule. Its amino acid composition suggests that it is homologous with the other Desulfovibrio ferredoxins. The rubredoxin is also an acidic protein of 6,000 molecular weight and contains one atom of iron and four cysteine residues per molecule. The amino acid composition and molecular weight of the cytochrome c3 from D. desulfuricans (strain Norway 4) are reported. Its spectral properties are very similar to those of the other cytochromes c3 (molecular weight, 13,000) of Desulfovibrio and show that it contains four hemes per molecule. This cytochrome has a very low redox potential and acts as a carrier in the coupling of hydrogenase and thiosulfate reductase in extracts of Desulfovibrio gigas and Desulfovibrio desulfuricans (Norway strain) in contrast to D. gigas cytochrome c3 (molecular weight, 13,000). A comparison of the activities of the cytochrome c3 (molecular weight, 13,000) of D. gigas and that of D. desulfuricans in this reaction suggests that these homologous proteins can have different specificity in the electron transfer chain of these bacteria.     

Amino acid sequence and molecular modelling of a thermostable two (4Fe-4S) ferredoxin from the archaebacterium Methanococcus thermolithotrophicus

The amino acid sequence of a two (4Fe-4S) ferredoxin from the methanogenic bacterium Methanococcus thermolithotrophicus (FdMt) has been determined. This thermostable protein comprises 60 amino acid residues (M_r 6541) and two (4Fe-4S) clusters chelated to the protein through the eight cysteines. FdMt contains a relatively high number of lysines [5], threonines [4] and valines [10]. The three-dimensional molecular model generated from the Peptococcus aerogenes X-ray structure keeps the characteristic overall ferredoxin folding thanks to complementary substitutions of residues of the hydrophobic core. The major structural features of the model are the different environments of both clusters, and the patch of three lysines at one end of the molecule. The possible role of several structural factors in the thermostability of the protein is discussed.     

Crystal structure of the 2[4Fe-4S] ferredoxin from Chromatium vinosum: evolutionary and mechanistic inferences for [3/4Fe-4S] ferredoxins.

The crystal structure of the 2[4Fe-4S] ferredoxin from Chromatium vinosum has been solved by molecular replacement using data recorded with synchrotron radiation. The crystals were hexagonal prisms that showed a strong tendency to develop into long tubes. The hexagonal prisms diffracted to 2.1 A resolution at best, and a structural model for C. vinosum ferredoxin has been built with a final R of 19.2%. The N-terminal domain coordinates the two [4Fe-4S] clusters in a fold that is almost identical to that of other known ferredoxins. However, the structure has two unique features. One is a six-residue insertion between two ligands of one cluster forming a two-turn external loop; this short loop changes the conformation of the Cys 40 ligand compared to other ferredoxins and hampers the building of one NH...S H-bond to one of the inorganic sulfurs. The other remarkable structural element is a 3.5-turn alpha-helix at the C-terminus that covers one side of the same cluster and is linked to the cluster-binding domain by a six-residue external chain segment. The charge distribution is highly asymmetric over the molecule. The structure of C. vinosum ferredoxin strongly suggests divergent evolution for bacterial [3/4Fe-4S] ferredoxins from a common ancestral cluster-binding core. The unexpected slow intramolecular electron transfer rate between the clusters in C. vinosum ferredoxin, compared to other similar proteins, may be attributed to the unusual electronic properties of one of the clusters arising from localized changes in its vicinity rather than to a global structural rearrangement.     

Amino acid sequence of a four-iron-four-sulphur ferredoxin isolated from Bacillus stearothermophilus.

1. The primary structure of a 4Fe-4S ferredoxin from Bacillus stearothermophilus was determined and shown to consist of a single polypeptide chain of 81 amino acid residues. The molecular weight of the holoprotein is about 9120. 2. There are only four cysteine residues in the molecule; three of these are located near the N-terminus as a Cys-X-X-Cys-X-X-Cys segment, and the fourth cysteine residue is followed by a proline and located in the C-terminal half. 3. The Fe-S chromophore in B. stearothermophilus ferredoxin was previously well characterized and was shown to consist of a single 4Fe-4S cluster. This ferredoxin sequence establishes for the first time the relative location of the four cysteine residues necessary to bind the 4Fe-4S cluster of a 4Fe ferredoxin, and is in agreement with the criteria for the relative positions of the cysteines proposed from X-ray-crystallographic studies on an 8Fe (two 4Fe-4S clusters) ferredoxin. 4. The sequence of B. stearothermophilus ferredoxin is homologous in many segments to that of other bacterial ferredoxins, the degree of homology being greater towards ferredoxins from Desulfovibrio gigas and photosynthetic bacteria than to Clostridial ferredoxins. 5. The presence of a relatively higher number of glutamic acid and lower number of cysteine residues in the molecule may explain the greater thermal stability and oxygen-insenstivity of this ferredoxin.     

A four-iron ferredoxin from Desulfovibrio desulfuricans (Short Communication)

Ferredoxin from Desulfovibrio desulfuricans was isolated, purified and crystallized. It contains four iron atoms and four sulphido or ;acid-labile' sulphur atoms for a molecule of 6000 daltons. The absorption spectrum in the u.v.-visible region and the electron-paramagnetic-resonance signals of the reduced protein are similar to those observed for other four-iron ferredoxins. The amino acid composition is different from that of Desulfovibrio gigas ferredoxin. The redox potential of -0.33V at pH7.0 was determined by dye techniques.     

Atomic resolution structures of oxidized [4Fe-4S] ferredoxin from Bacillus thermoproteolyticus in two crystal forms: systematic distortion of [4Fe-4S] cluster in the protein

Diffraction data of two crystal forms (forms I and II) of [4Fe-4S] ferredoxin from Bacillus thermoproteolyticus have been collected to 0.92 A and 1.00 A resolutions, respectively, at 100 K using synchrotron radiation. Anisotropic temperature factors were introduced for all non-hydrogen atoms in the refinement with SHELX-97, in which stereochemical restraints were applied to the protein chain but not to the [4Fe-4S] cluster. The final crystallographic R-factors are 9.8 % for 7.0-0.92 A resolution data of the form I and 11.2 % for the 13.3-1.0 A resolution data of the form II. Many hydrogen atoms as well as multiple conformations for several side-chains have been identified. The present refinement has revised the conformations of several peptide bonds and side-chains assigned previously at 2.3 A resolution; the largest correction was that the main-chain of Pro1 and the side-chain of Lys2 were changed by rotating the C(alpha)-C bond of Lys2. Although the overall structures in the two crystal forms are very similar, conformational differences are observed in the two residues at the middle (Glu29 and Asp30) and the C-terminal residues, which have large temperature factors. The [4Fe-4S] cluster is a distorted cube with non-planar rhombic faces. Slight but significant compression of the four Fe-S bonds along one direction is observed in both crystal forms, and results in the D(2d) symmetry of the cluster. The compressed direction of the cluster relative to the protein is conserved in the two crystal forms and consistent with that in one of the clusters in Clostridium acidurici ferredoxin.     

Preliminary 1H-NMR studies of the interaction between cytochrome c3 and ferredoxin I from Desulfovibrio desulfuricans Norway

The complex formation of two electron transfer proteins, cytochrome c3 and ferredoxin I from Desulfovibrio desulfuricans Norway, has been shown by 1H-NMR spectroscopy. Presence of ferredoxin I produces ferricytochrome c3 1H-NMR spectrum modifications. The chemical shift of perturbated heme methyl resonances has been used to determine the stoichiometry of the complex. At pH 7.6 and 20 degrees C, the two proteins were found to form a complex 1:1 with an association constant, KA, of 10(4) M-1. Two of the four hemes are affected by presence of ferredoxin I and may be involved in the electron transfer sites. The heme methyl resonances are average resonances of free and bound cytochrome c3 resonances, indicating a fast exchange process on the NMR time scale.     

Structural stabilization of [2Fe-2S] ferredoxin from Halobacterium salinarum

The ferredoxin of the extreme haloarchaeon Halobacterium salinarum requires high (>2 M) concentration of salt for its stability. We have used a variety of spectroscopic probes for identifying the structural elements which necessitate the presence of high salt for its stability. Titration of either the fluorescence intensity of the tryptophan residues or the circular dichroism (CD) at 217 nm with salt has identified a structural form at low (<0.1 M) concentration of salt. This structural form (L) exhibits increased solvent exposure of W side chain(s) and decreased level of secondary structure compared to the native (N) protein at high concentrations of salt. The L-form, however, contains significantly higher levels of both secondary and tertiary structures compared to the form (U) found in highly denaturing conditions such as 8 M urea. The structural integrity of the L-form was highly pH dependent while that of N- or U-form was not. The pH dependence of either fluorescence intensity or CD of the L-form showed the presence of two apparent pK values: approximately 5 and approximately 10. The structural integrity of the L-form at low (<5) pH was very similar to that of the N-form. However, titration with denaturants showed that the low pH L-form is significantly less stable than the N-form. The increased destabilization of the L-form with the increase in pH was interpreted to be due to mutual Coulombic repulsion of carboxylate side chains (pK approximately 6) and due to the disruption of salt bridge(s) between ionized carboxylates and protonated amino groups (pK approximately 10). Estimation of solvent accessibility of W residues by fluorescence quenching, and measurement of decay kinetics of fluorescence intensity and anisotropy strongly support the above model. Polylysine interacted stoichiometrically with the L-form of ferredoxin resulting in nativelike structure. In conclusion, our studies show that high concentration of salt stabilizes the haloarchaeal ferredoxin in two ways: (i) neutralization of Coulombic repulsion among carboxyl groups of the acidic residues, and (ii) salting out of hydrophobic residues leading to their burial and stronger interaction.     

Characterization of the selenium-substituted 2 [4Fe-4Se] ferredoxin from Clostridium pasteurianum

The sulfur atoms of the two [4Fe-4S] clusters present in the ferredoxin from Clostridium pasteurianum have been replaced by selenium. The substitution is readily carried out by incubating the apoferredoxin with excess amounts of Fe3+, selenite, and dithiothreitol under anaerobic conditions. The UV-visible absorption spectrum of the Se-substituted ferredoxin, the core extrusion of its active sites, and analyses of its iron and selenium contents show that it contains two [4Fe-4Se] clusters. The Se-substituted ferredoxin is considerably less resistant to oxygen or to acidic and alkaline pH than the native ferredoxin: the half-lives of the former are 20-500 times shorter than those of the latter. The native ferredoxin and the Se-substituted ferredoxin display similar kinetic properties when used as electron donors to the hydrogenase from C. pasteurianum. It is of note, however, that the Km and Vmax values are lower for the 2[4Fe-4Se] ferredoxin than for the 2[4Fe-4S] ferredoxin. Reductive and oxidative titrations with dithionite and with thionine, respectively, show that both ferredoxins are two-electron carriers. The redox potentials of the ferredoxins have been measured by equilibrating them with the H2/H+ couple via hydrogenase: values of -423 and -417 mV have been found for the 2[4Fe-4S] ferredoxin and 2[4Fe-4Se] ferredoxin, respectively. Ferredoxins containing both chalcogenides in their [4Fe-4X] (X = S, Se) clusters have been prepared by reconstitution reactions involving mixtures of sulfide and selenide: the latter experiments show that sulfide and selenide are equally reactive in the incorporation of [4Fe-4X] (X = S, Se) sites into ferredoxin. The present report, together with former studies, establishes the general feasibility of the Se/S substitution in [2Fe-2S] and in [4Fe-4S] clusters of proteins and of synthetic analogues.     

Structure of a thioredoxin-like [2Fe-2S] ferredoxin from Aquifex aeolicus

The 2.3 A resolution crystal structure of a [2Fe-2S] cluster containing ferredoxin from Aquifex aeolicus reveals a thioredoxin-like fold that is novel among iron-sulfur proteins. The [2Fe-2S] cluster is located near the surface of the protein, at a site corresponding to that of the active-site disulfide bridge in thioredoxin. The four cysteine ligands are located near the ends of two surface loops. Two of these ligands can be substituted by non-native cysteine residues introduced throughout a stretch of the polypeptide chain that forms a protruding loop extending away from the cluster. The presence of homologs of this ferredoxin as components of more complex anaerobic and aerobic electron transfer systems indicates that this is a versatile fold for biological redox processes.     

Unusual spectroscopic and electrochemical properties of the 2[4Fe-4S] ferredoxin of Thauera aromatica

A reduced ferredoxin serves as the natural electron donor for key enzymes of the anaerobic aromatic metabolism in the denitrifying bacterium Thauera aromatica. It contains two [4Fe-4S] clusters and belongs to the Chromatium vinosum type of ferredoxins (CvFd) which differ from the "clostridial" type by a six-amino acid insertion between two successive cysteines and a C-terminal alpha-helical amino acid extension. The electrochemical and electron paramagnetic resonance (EPR) spectroscopic properties of both [4Fe-4S] clusters from T. aromatica ferredoxin have been investigated using cyclic voltammetry and multifrequency EPR. Results obtained from cyclic voltammetry revealed the presence of two redox transitions at -431 and -587 mV versus SHE. X-band EPR spectra recorded at potentials where only one cluster was reduced (greater than -500 mV) indicated the presence of a spin mixture of S = (3)/(2) and (5)/(2) spin states of one reduced [4Fe-4S] cluster. No typical S = (1)/(2) EPR signals were observed. At lower potentials (less than -500 mV), the more negative [4Fe-4S] cluster displayed Q-, X-, and S-band EPR spectra at 20 K which were typical of a single S = (1)/(2) low-spin [4Fe-4S] cluster with a g(av) of 1.94. However, when the temperature was decreased stepwise to 4 K, a magnetic interaction between the two clusters gradually became observable as a temperature-dependent splitting of both the S = (1)/(2) and S = (5)/(2) EPR signals. At potentials where both clusters were reduced, additional low-field EPR signals were observed which can only be assigned to spin states with spins of >(5)/(2). The results that were obtained establish that the common typical amino acid sequence features of CvFd-type ferredoxins determine the unusual electrochemical properties of the [4Fe-4S] clusters. The observation of different spin states in T. aromatica ferredoxin is novel among CvFd-type ferredoxins.     

Slow formation of [3Fe-4S](1+) clusters in mutant forms of Desulfovibrio africanus ferredoxin III

Desulfovibrio africanus ferredoxin III (Da FdIII) readily interconverts between a 7Fe and an 8Fe form with Asp-14 believed to provide a cluster ligand in the latter form. To investigate the factors important for cluster interconversion in Fe/S cluster-containing proteins we have studied two variants of Da FdIII produced by site-directed mutagenesis, Asp14Glu and Asp14His, with cluster incorporation performed in vitro. Characterisation of these proteins by UV/visible, EPR and (1)H NMR spectroscopies revealed that the formation of the stable 7Fe form of these proteins takes some time to occur. Evidence is presented which indicates the [4Fe-4S](2+) cluster is incorporated prior to the [3Fe-4S](1+) cluster.     

The primary structure of a protein containing a putative [6Fe-6S] prismane cluster from Desulfovibrio desulfuricans (ATCC 27774).

The gene encoding a protein containing a novel iron sulfur cluster ([6Fe-6S]) has been cloned from Desulfovibrio desulfuricans ATCC 27774 and sequenced. An open reading frame was found encoding a 545 amino acid protein (M(r) 58,496). The amino acid sequence is highly homologous with that of the corresponding protein from D. vulgaris (Hildenborough) and contains a Cys-motif that may be involved in coordination of the Fe-S cluster.     

Comparative studies of polyhemic cytochromes c isolated from Desulfovibrio vulgaris (Hildenborough) and Desulfovibrio desulfuricans (Norway)

Cytochrome c3 (Mr 26,000) has been characterized in Desulfovibrio vulgaris (Hildenborough) and its properties compared with polyhemic cytochromes c isolated from the same organism and from D. desulfuricans (Norway). It can be described as an octaheme cytochrome c3 constituted of two identical subunits. Absorption spectrum is similar to cytochrome c3 (Mr 13,000) and individual redox potentials have an average value of -180 mV.3 The N terminal sequence is compared with an homologous cytochrome isolated from D. desulfuricans Norway.