Effect of nutrients on growth and lipid accumulation in the green algae Dunaliella tertiolecta

Production of biofuel from algae is dependent on the microalgal biomass production rate and lipid content. Both biomass production and lipid accumulation are limited by several factors, of which nutrients play a key role. In this research, the marine microalgae Dunaliella tertiolecta was used as a model organism and a profile of its nutritional requirements was determined. Inorganic phosphate PO4(3-) and trace elements: cobalt (Co2+), iron (Fe3+), molybdenum (Mo2+) and manganese (Mn2+) were identified as required for algae optimum growth. Inorganic nitrogen in the form of nitrate NO3- instead of ammonium (NH4+) was required for maximal biomass production. Lipids accumulated under nitrogen starvation growth condition and this was time-dependent. Results of this research can be applied to maximize production of microalgal lipids in optimally designed photobioreactors.     

Bioprospecting for hyper-lipid producing microalgal strains for sustainable biofuel production

Global petroleum reserves are shrinking at a fast pace, increasing the demand for alternate fuels. Microalgae have the ability to grow rapidly, and synthesize and accumulate large amounts (approximately 20-50% of dry weight) of neutral lipid stored in cytosolic lipid bodies. A successful and economically viable algae based biofuel industry mainly depends on the selection of appropriate algal strains. The main focus of bioprospecting for microalgae is to identify unique high lipid producing microalgae from different habitats. Indigenous species of microalgae with high lipid yields are especially valuable in the biofuel industry. Isolation, purification and identification of natural microalgal assemblages using conventional techniques is generally time consuming. However, the recent use of micromanipulation as a rapid isolating tool allows for a higher screening throughput. The appropriate media and growth conditions are also important for successful microalgal proliferation. Environmental parameters recorded at the sampling site are necessary to optimize in vitro growth. Identification of species generally requires a combination of morphological and genetic characterization. The selected microalgal strains are grown in upscale systems such as raceway ponds or photobireactors for biomass and lipid production. This paper reviews the recent methodologies adopted for site selection, sampling, strain selection and identification, optimization of cultural conditions for superior lipid yield for biofuel production. Energy generation routes of microalgal lipids and biomass are discussed in detail.     

Multi-parameter flow cytometry as a tool to monitor heterotrophic microalgal batch fermentations for oil production towards biodiesel

Multi-parameter flow cytometry was used to monitor cell intrinsic light scatter, viability, and lipid content of Chlorella protothecoides cells grown in shake flasks. Changes in the right angle light scatter (RALS) and forward angle light scatter (FALS) were detected during the microalgal growth, which were attributed to the different microalgal cell cycle stages. The proportion of cells not stained with PI (cells with intact cytoplasmic membrane) was high (> 90%) during the microalgal growth, even in the latter stationary phase, suggesting that the microalgal cells built-up storage materials which allowed them to survive under nutrient starvation, maintaining their cytoplasmic membranes intact. A high correlation between the Nile Red fluorescence intensity measured by flow cytometry and total lipid content assayed by the traditional lipid extraction method was found for this microalga, making this method a suitable and quick technique for the screening of microalgal strains for lipid production, optimization of biofuel production bioprocesses, and scale-up studies. The highest oil content (∼28% w/w dry cell weight, estimated by flow cytometry) was observed in the latter stationary phase. In addition, C. protothecoides oil also depicted the adequate fatty acid methyl ester composition for biodiesel purposes at this growth phase, suggesting that the microalgal oil produced during the latter stationary phase could be an adequate substitute for diesel fuel. Medium growth optimization for enhancement of microalgal oil production is now in progress, using the multi-parameter approach.     

Effects of Temperature and pH on Cell Growth of a Flocculating Microalga (Chlorella vulgaris) JSC-7

微藻是可广泛用于健康食品及水产养殖的饵料,同时,微藻细胞内积累的油脂可作为可再生生物燃料,因此微藻的生长和代谢受到广泛关注。温度和pH对微藻的生物量积累有很大影响,考察不同温度和pH条件下微藻细胞的生长有助于寻找最佳的条件进行微藻的培养。自絮凝小球藻JSC-7（Chlorella vulgaris JSC-7）可实现自沉降采收,有利于降低微藻生产成本,优化其生长条件对更好地利用该微藻具有重要意义。考察了温度（22∽40℃）及pH（6.0∽10.0）对其细胞生长、叶绿素含量和油脂产量的影响。在所选取的温度及pH范围内,JSC-7细胞均可生长,显示该藻种可以适应广泛的温度和pH条件。适合细胞生长的温度依次为31℃〉28℃〉35℃〉25℃,pH依次为7.0〉8.0〉6.0。pH 8.0时生物量和油脂的积累量最多,说明该藻株在弱碱条件下更适合生长和产油。当温度为31℃、pH为7.0时,可获得最高的生长量（OD690=0.941）、叶绿素含量（19 mg/L）及油脂产量（39.07%/克干重）。     

A kinetic model for lutein production by the green microalga Chlorella protothecoides in heterotrophic culture

Production of lutein by the green microalga Chlorella protothecoides grown heterotrophically in a fermentor using glucose as the carbon source and urea as the nitrogen source was investigated. An unstructured kinetic model was proposed to describe the microalgal culture system including cell growth, lutein formation, as well as glucose and nitrogen consumption. The inhibition potentials of biomass, product and substrates on growth and lutein formation were examined and incorporated into the kinetic model. Values of the kinetic model parameters were estimated. The resulting model predictions were in good agreement with the experimental results. The model can be helpful in scale-up, optimization and control of the C. protothecoides culture process, and can also be used as a guideline for similar microalgal cultivation systems. Received 28 January 1999/ Accepted in revised form 27 August 1999     

Functional group richness: implications of biodiversity for light use and lipid yield in microalgae

Currently, very few studies address the relationship between diversity and biomass/lipid production in primary producer communities for biofuel production. Basic studies on the growth of microalgal communities, however, provide evidence of a positive relationship between diversity and biomass production. Recent studies have also shown that positive diversity–productivity relationships are related to an increase in the efficiency of light use by diverse microalgal communities. Here, we hypothesize that there is a relationship between diversity, light use, and microalgal lipid production in phytoplankton communities. Microalgae from all major freshwater algal groups were cultivated in treatments that differed in species richness and functional group richness. Polycultures with high functional group richness showed more efficient light use and higher algal lipid content with increasing species richness. There was a clear correlation between light use and lipid production in functionally diverse communities. Hence, a powerful and cost‐effective way to improve biofuel production might be accomplished by incorporating diversity related, resource‐use‐dynamics into algal biomass production.     

以异养细胞作为种子的椭圆小球藻产油脂光自养培养优化

异养细胞种子/光自养培养方法是一种可异养培养的能源微藻培养的有效方法,但已有文献尚未从工艺优化角度考察其发展潜力。为了获得较高细胞密度的用于光自养培养的种子和提高光自养培养的细胞密度与油脂产率,对异养细胞种子/光自养培养的培养基和培养条件进行了优化。结果表明,采用优化后的培养基,椭圆小球藻在摇瓶中异养培养的最高藻细胞密度可达11.04 g/L,比在初始培养基条件下提高了28.0%,在5 L发酵罐中异养培养的藻细胞密度达到73.89 g/L;在2 L柱式光生物反应器中光自养培养的藻细胞密度、油脂含量和油脂产率分别达1.62 g/L、36.34%和6.1 mg/(L·h),油脂成分主要为含C16-C18碳链的脂肪酸,是制备生物柴油的理想原料。经过优化,异养细胞种子/光自养培养这一方法能够显著地提高椭圆小球藻产油脂的能力,这进一步表明异养细胞种子/光自养培养方法有望成为可异养的能源微藻的高效培养方式。     

Growth and lipid accumulation properties of a freshwater microalga Scenedesmus sp. under different cultivation temperature

Microalgal lipid is a promising feedstock for biodiesel production. Effect of cultivation temperature on the growth and lipid accumulation properties of a freshwater microalga Scenedesmus sp. LX1 was studied. Scenedesmus sp. LX1 could grow in a wide range of temperature (10～30°C), and the growth activation energy was 49.3 kJ·mol(-1). The optimal temperature to produce microalgal biomass and lipid was 20°C, and after 15 days of batch cultivation the productivities of 313.3 g biomass·(g P)(-1), 112 g lipid (g P)(-1) and 14.7 g TAGs·(g P)(-1) were obtained. The content of polyunsaturated fatty acids decreased with the increase of cultivation temperature. The reactive oxygen species (ROS) levels at 10°C and 20°C were higher than that under higher temperature. For the first time the cultivation temperature, ROS level, specific growth rate and lipid content per microalgal biomass were correlated together.     

Molecular Identification and Comparative Evaluation of Tropical Marine Microalgae for Biodiesel Production

Marine microalgae have emerged as important feedstock for liquid biofuel production. The identification of lipid-rich native microalgal species with high growth rate and optimal fatty acid profile and biodiesel properties is the most challenging step in microalgae-based biodiesel production. In this study, attempts have been made to bio-prospect the biodiesel production potential of marine and brackish water microalgal isolates from the west coast of India. A total of 14 microalgal species were isolated, identified using specific molecular markers and based on the lipid content; seven species with total lipid content above 20% of dry cell weight were selected for assessing biodiesel production potential in terms of lipid and biomass productivities, nile red fluorescence, fatty acid profile and biodiesel properties. On comparative analysis, the diatoms were proven to be promising based on the overall desirable properties for biodiesel production. The most potential strain Navicula phyllepta MACC8 with a total lipid content of 26.54 % of dry weight of biomass, the highest growth rate (0.58 day^?1) and lipid and biomass productivities of 114 and 431 mgL^?1 day^?1, respectively, was rich in fatty acids mainly of C16:0, C16:1 and C18:0 in the neutral lipid fraction, the most favoured fatty acids for ideal biodiesel properties. The biodiesel properties met the requirements of fuel quality standards based on empirical estimation. The marine diatoms hold a great promise as feedstock for large-scale biodiesel production along with valuable by-products in a biorefinery perspective, after augmenting lipid and biomass production through biochemical and genetic engineering approaches.     

Optimization of Chlorella biomass harvesting by flocculation and its potential for biofuel production

Optimization of microalgal biomass harvesting is essential to produce effective and optimum outcomes that can contribute towards a feasible and economical harvesting technique. Two Chlorella species were used, namely, C. vulgaris and C. sorokiniana UKM3. Two essential factors affecting microalgal biomass harvesting via flocculation, namely, the initial pH of the microalgal broth and flocculant (chitosan) concentration were studied. The optimization process was conducted by using a response surface methodology (RSM) based on the model of face-centered-central composite design (FC-CCD). The potential for biofuel application of the harvested biomass was evaluated based on the production of fatty acid methyl esters (FAMEs) by transesterification. The quadratic models obtained from the RSM significantly fitted the experiment data as the p-values were less than 0.05. The initial pH of the microalgal suspension was found to have a more significant effect on the flocculation process than flocculant concentration. For C. vulgaris, the highest flocculant efficiency of 98.7% was obtained at a chitosan concentration of 0.2 g L^?1 and an initial pH of 12.0, whereas for C. sorokiniana UKM3, at 0.15 g L^?1 of chitosan and initial pH of 12.0 produced the highest efficiency of 97.1%. The harvested biomass of both species exhibited a high content of palmitic acid (C16:0) with 29.74 wt% and 11.81 wt% of dry biomass for C. vulgaris and C. sorokiniana UKM3, respectively. This study showed that Chlorella species can be harvested efficiently using the flocculation process and manifested an excellent potential for biodiesel production where palmitic acid (C16:0) is one of the main compounds for high-acid oil-biodiesel.

     

Using polyethylene glycol as nonionic osmoticum to promote growth and lipid production of marine microalgae Nannochloropsis oculata

To promote the economic feasibility of Nannochloropsis oculata, efficacy of using polyethylene glycol (PEG) to increase microalgal growth and lipid accumulation was investigated. We first examined the effects of PEG concentrations on microalgal growth using 0–5 % (w/v) PEG-6000, and followed by exploring the effects of PEG molecular weights (400, 600, 2,000, 4,000, 6,000, and 20,000) on microalgal growth, size, as well as on yields of biomass, total lipids, and eicosapentaenoic acid. In addition, the capacity of PEG to reduce the effect of oxygen inhibition on microalgal growth was also investigated to evaluate its adaptability for use in large-scale and closed setting. Our results showed that PEG-induced osmotic stress (Π) in the range of 2.465–2.472 MPa can raise microalgal growth. The PEG with higher molecular weight exhibited greater efficacy of growth promotion but less lipid content under equal concentration. In this study, 0.5 % (w/v) PEG-20000 (Π = 2.466 MPa) remarkably enhanced microalgal growth without interference of intracellular lipid productivity and cellular size, yielding >50 % (w/w) increases in biomass, total lipid, and eicosapentaenoic acid amounts after 7 days that provided the optimal condition for microalgal cultivation. These positive effects possibly resulted from the moderate enhancement of osmotic stress in the medium and stronger chaotrope-like behavior from higher molecular weight PEG. With further verification that 0.5 % (w/v) PEG-20000 enabled to reduce the effect of oxygen inhibition on microalgal growth, the PEG-20000-mediated cultivation offers a feasible means for mass culture of N. oculata in closed setting.     

Effects of Initial Phosphorus Concentration and Light Intensity on Biomass Yield per Phosphorus and Lipid Accumulation of Scenedesmus sp. LX1

Phosphorus has been considered as one of the most important limiting resources of large-scale production of microalgal biofuel. The approaches to increase biomass yield per phosphorus, along with the lipid accumulation properties of Scenedesmus sp. LX1, were investigated in this study. It was found that practical biomass yield per phosphorous was reduced with the increase of initial phosphorus (P) concentration, but increased with light intensity. The highest biomass yield per P of 4,500 kg-biomass/kg-P was achieved at initial phosphorus concentration of 0.05 mg?·?L^?1 under the light intensity of 320 μmol photon?·?m^?2?·?s^?1. Furthermore, the lipid content per biomass and triacylglycerols (TAGs) content per lipid were found to be positively correlated to biomass yield per P. With the biomass yield increased from 2,800 kg-biomass/kg-P to 4,500 kg-biomass/kg-P, the lipid content per microalgal biomass and TAG content per lipid increased from 18.7 % to 35.0 % and from 69.5 % to 83.0 %. These results suggested a possible approach to achieve high biomass production and high lipid content simultaneously.     

Biomass and lipid production of heterotrophic microalgae <Emphasis Type="Italic">Chlorella protothecoides</Emphasis> by using biodiesel-derived crude glycerol

Microalgal lipids may be a more sustainable biodiesel feedstock than crop oils. We have investigated the potential for using the crude glycerol as a carbon substrate. In batch mode, the biomass and lipid concentration of Chlorella protothecoides cultivated in a crude glycerol medium were, respectively, 23.5 and 14.6 g/l in a 6-day cultivation. In the fed-batch mode, the biomass and lipid concentration improved to 45.2 and 24.6 g/l after 8.2 days of cultivation, respectively. The maximum lipid productivity of 3 g/l day in the fed-batch mode was higher than that produced by batch cultivation. This work demonstrates the feasibility of crude biodiesel glycerol as an alternative carbon substrate to glucose for microalgal cultivation and a cost reduction of carbon substrate feed in microalgal lipid production may be expected.     

Extraction of oil from microalgae for biodiesel production: A review

The rapid increase of CO(2) concentration in the atmosphere combined with depleted supplies of fossil fuels has led to an increased commercial interest in renewable fuels. Due to their high biomass productivity, rapid lipid accumulation, and ability to survive in saline water, microalgae have been identified as promising feedstocks for industrial-scale production of carbon-neutral biodiesel. This study examines the principles involved in lipid extraction from microalgal cells, a crucial downstream processing step in the production of microalgal biodiesel. We analyze the different technological options currently available for laboratory-scale microalgal lipid extraction, with a primary focus on the prospect of organic solvent and supercritical fluid extraction. The study also provides an assessment of recent breakthroughs in this rapidly developing field and reports on the suitability of microalgal lipid compositions for biodiesel conversion.     

State and parameter estimation of microalgal photobioreactor cultures based on local irradiance measurement

Local photosynthetic photon flux fluence rate (PPFFR) determined by a submersible 4pi quantum micro-sensor was used in developing a versatile on-line state estimator for stirred-tank microalgal photobioreactor cultures. A marine micro-alga Dunaliella salina was used as a model organism in this study. On-line state estimation was realized using the extended Kalman filter (EKF), based on a state model of the photobioreactor and on-line local PPFFR measurement. The dynamic state model for the photobioreactor was derived based on mass-balance equations of the relevant states. The measurement equation was established based on an empirical correlation between the microalgal biomass concentration and the local PPFFR measured at a fixed point inside the photobioreactor. An internal model approach was used to estimate the specific growth rate without the need of state-based kinetic expression. The estimator was proven to be capable of estimating biomass concentration and specific growth rate, as well as phosphate and dissolved oxygen concentrations in a photobioreactor illuminated with either fixed or time-varying incident radiation. The quantum sensor was shown to be robust and able to quickly respond to dynamic changes in local PPFFR. In addition, the quantum sensor outputs were not affected by bubble aeration or agitation within the typical operating range. The strong filtering capacity of EKF gives the state estimator superior performance compared to direct calculation from the empirical biomass/local PPFFR correlation. This state estimation system makes use of inexpensive and reliable sensor hardware to report key process dynamics of microalgal photobioreactor cultures on-line, enabling improved operation of such a process.     

Reduction of CO2 by a high-density culture of Chlorella sp. in a semicontinuous photobioreactor

The microalga incorporated photobioreactor is a highly efficient biological system for converting CO2 into biomass. Using microalgal photobioreactor as CO2 mitigation system is a practical approach for elimination of waste gas from the CO2 emission. In this study, the marine microalga Chlorella sp. was cultured in a photobioreactor to assess biomass, lipid productivity and CO2 reduction. We also determined the effects of cell density and CO2 concentration on the growth of Chlorella sp. During an 8-day interval cultures in the semicontinuous cultivation, the specific growth rate and biomass of Chlorella sp. cultures in the conditions aerated 2-15% CO2 were 0.58-0.66 d(-1) and 0.76-0.87 gL(-1), respectively. At CO2 concentrations of 2%, 5%, 10% and 15%, the rate of CO2 reduction was 0.261, 0.316, 0.466 and 0.573 gh(-1), and efficiency of CO2 removal was 58%, 27%, 20% and 16%, respectively. The efficiency of CO2 removal was similar in the single photobioreactor and in the six-parallel photobioreactor. However, CO2 reduction, production of biomass, and production of lipid were six times greater in the six-parallel photobioreactor than those in the single photobioreactor. In conclusion, inhibition of microalgal growth cultured in the system with high CO2 (10-15%) aeration could be overcome via a high-density culture of microalgal inoculum that was adapted to 2% CO2. Moreover, biological reduction of CO2 in the established system could be parallely increased using the photobioreactor consisting of multiple units.     

Biostimulant activity of humic-like substances from agro-industrial waste on Chlorella vulgaris and Scenedesmus quadricauda

The use of microalgae in a number of sectors, including biodiesel, feed and food production, is proving to be of great interest. An evaluation was made of the possible biostimulant effects on Chlorella vulgaris and Scenedesmus quadricauda of humic-like substances (HLs) extracted from agro-industrial wastes. These included digestate from the waste of an agro-livestock farm (D-HL), oil extraction residues from rape (B-HL, Brassica napus L.) and tomato residues (T-HL). The microalgal growth medium (BG11) was supplemented with HLs to evaluate their effect on biomass yield as well as carbohydrate, chlorophylls a and b, lipid and fatty acid contents. Our results showed that the HLs used in the test are effective biostimulants of C. vulgaris and S. quadricauda. The biostimulant effect seems to depend on the type of extract used for cultivating the microalgae, the concentration and the species treated. Among the extracts applied to the growth medium, D-HL and T-HL seem to have a significant effect on microalgal biomass and lipid production. Although B-HL showed no significant effect on the biomass and lipid content of C. vulgaris and S. quadricauda, its presence in the growth medium increased the saturated:unsaturated fatty acid ratio (SFA/UFA) and stimulated the sugar metabolism of the microalgae by increasing their carbohydrate and chlorophyll content.     

Anaerobic digestion of microalgal biomass for bioenergy production,removal of nutrients and microcystin: current status

Using renewable microalgal biomass as active feedstocks for biofuels and bioproducts is explored to substitute petroleum-based fuels and chemicals. In the last few years, the importance of microalgae biomass has been realized as a renewable feedstock due to several positive attributes associated with it. Biorefinery via anaerobic digestion (AD) of microalgal biomass is a promising and sustainable method to produce value-added chemicals, edible products and biofuels. Microalgal biomass pretreatment is a significant process to enhance methane production by AD. Findings on the AD microbial community’s variety and organization can give novel in turn on digester steadiness and presentation. This review presents a vital study of the existing facts on the AD microbial community and AD production. Co-digestion of microalgal biomass with different co-substrates was used in AD to enhance biogas production, and the process was economically viable with improved biodegradability. Microcystins, which are produced by toxic cyanobacterial blooms, create a severe hazard to environmental health. Anaerobic biodegradation is an effective method to degrade the microcystins and convert into nontoxic products. However, for the cost-effective conversion of biomass to energy and other beneficial byproducts, additional highly developed research is still required for large-scale AD of microalgal biomass.     

Enrichment as a screening method for a high-growth-rate microalgal strain under continuous cultivation system

Microalgae are a promising feedstock for renewable biodiesel production. High productivity of biodiesel production from microalgae is directly related to growth rate as well as lipid content of cells. In the present study, an enrichment process in a continuous cultivation system was developed to screen a high-growth-rate microalga from a mixed culture of microalgal species; Chlorella vulgaris, Chlorella protothecoides, and Chlamydomonas reinhardtii were used as test organisms for our experiments. The time-dependent washout of mixed microalgal pool was executed to successfully enrich the C. reinhardtii, which exhibits the higher growth rate than C. vulgaris and C. protothecoides under turbidostat conditions within 75 h. The domination of C. reinhardtii in the mixed culture was validated by on-line monitoring of growth rate and flowcytometric analysis. For the time-efficient production of microalgal biomass, this screening process has a high potential to segregate the fast-growing microalgal strains from the pool of various uncharacterized microalgal species and random mutants.     

Integration of biological waste conversion and wastewater treatment plants by microalgae cultivation

In this study, growth performance and lipid content of two microalgae species Neochloris oleoabundans and Chlorella vulgaris are monitored by using three different types of sludge waste feedstocks obtained from the water treatment plants located in Bedonia, Borgotaro and Fornovo (Montagna2000 Spa, Province of Parma, Italy). The sludge waste is optimized in order to achieve microalgal growth media and dispose of the sewage sludge produced at the wastewater treatment facilities. Both photoautotrophic and heterotrophic growth conditions are applied to the microalgal cultivations. The growth parameters of microalgae strains such as cell concentration, growth rate, optical density, cell biovolume, photosynthetic pigments and lipid contents are monitored. The amounts of total dried lipid biomass, obtained by the biological conversion of the wet sludge waste, are determined. Lipid production of microalgal cells grown in the medium optimized from sludge waste from the Fornovo site provides the highest amount of microalgal lipid content for N. oleoabundans and C. vulgaris photoautotrophic cultivations, while sludge waste from the Bedonia site provides for N. oleoabundans heterotrophic cultivation.