Protective role of mitochondrial unsaturated lipids on the preservation of the apoptotic ability of cytochrome C exposed to singlet oxygen

Cytochrome c-mediated apoptosis in cells submitted to photodynamic therapy raises the question about the ability of photodynamically oxidized cytochrome c (cytc405) to trigger apoptosis as well as the effect of membranes on protein photo-oxidation. Cytochrome c was submitted to irradiation in the presence of MB+ in phosphate buffer and in the presence of four types of phosphatidylcholine/phosphatidylethanolamine/cardiolipin (PCPECL) liposomes (50/30/20%): totally saturated lipids (tsPCPECL), totally unsaturated lipids (tuPCPECL), partially unsaturated (80%) lipids, with unsaturation in the PC and PE content (puPCPECL80), and partially unsaturated (20%) lipids, with unsaturation in the CL content (puPCPECL20). Cytc405 was formed by irradiation in buffered water and in tsPCPECL and puPCPECL20 liposomes. In the presence of tuPCPECL and puPCPECL80, cytochrome c was protected from photodynamic damage (lipid-protected cytochrome c). In CL liposomes, 25% unsaturated lipids were enough to protect cytochrome c. The presence of unsaturated lipids, in amounts varying according to the liposome composition, are crucial to protect cytochrome c. Interesting findings corroborating the unsaturated lipids as cytochrome c protectors were obtained from the analysis of the lipid-oxidized derivatives of the samples. Native cytochrome c, lipid-protected cytochrome c, and cytc405 were microinjected in aortic smooth muscle cells. Apoptosis, characterized by nucleus blebbing and chromatin condensation, was detected in cells loaded with native and lipid protected cytochrome c but not in cells loaded with cytc405. These results suggest that photodynamic therapy-promoted apoptosis is feasible due to the protective effect of the mitochondrial lipids on the cytochrome c structure and function.     

Methanol biosynthesis by covalently immobilized cells of Methylosinus trichosporium: batch and continuous studies

The DEAE-cellulose linked cells of Methylosinus trichosporium displaying high specific methane mono-oxygenase activity (66 mumol methane oxidized/h mg cells) were used for methanol biosynthesis from biogas derived methane in a batch and a continuous cell reactor. The optimum cell-to-carrier ratio was determined to be 0.5 g cells/g dry weight cellulose. Batch experiments indicated that 100 mM phosphate ion concentration was necessary to inhibit further oxidation of methanol; excess oxygen supply favored methanol accumulation with an increase in methane conversion efficiency to 27%. A pulse of 40 mM sodium formate at the end of 6 h resulted in restoration of methanol accumulation by regenerating NADH(2) required for the sustained activity of methane mono-oxygenase. Maximum methanol level of 50 mumol/mg cells was obtained in the batch reactor. In a standard 50-mL ultrafiltration continuous reactor, the covalently linked cells produced methanol at a continuous rate of 100 mumol/h for the first 10 h, after which the methanol accumulation rate fell low due to the depletion of NADH(2). The methanol accumulation could be stimulated by supplying sodium formate (40 mM) in either 20 or 100 mM phosphate buffer. Maximum methanol accumulation rate of 267 mumol/h was obtained when 20 mM formate was supplied in the feed stream containing 100 mM phosphate ions, and this level of biosynthesis was maintained for over 72 h. The stoichiometric balance made at various points of formate addition indicated that the molar amount of methanol generated at steady state is dependent on the equimolar addition of sodium formate to the feed. The half-life t(1/2) and thermal denaturation rate constant K(d) were computed to be 108 h and 6.42 x 10(-3) h(-1), respectively.     

The reaction of cytochrome aa3 with (porphyrin) cytochrome c as studied by pulse radiolysis

(1) Using the pulse-radiolysis and stopped-flow techniques, the reactions of iron-free (porphyrin) cytochrome c and native cytochrome c with cytochrome aa3 were investigated. The porphyrin cytochrome c anion radical (generated by reduction of porphyrin cytochrome c by the hydrated electron) can transfer its electron to cytochrome aa3. The bimolecular rate constant for this reaction is 2 x 10(7) M-1 . s-1 (5 mM potassium phosphate, 0.5% Tween 20, pH 7.0, 20 degrees C). (2) The ionic strength dependence of the cytochrome c-cytochrome aa3 interaction was measured in the ionic strength range between 40 and 120 mM. At ionic strengths below 30 mM, a cytochrome c-cytochrome aa3 complex is formed in which cytochrome c is no longer reducible by the hydrated electron. A method is described by which the contributions of electrostatic forces to the reaction rate can be determined. (3) Using the stopped-flow technique, the effect of the dielectric constant (epsilon) of the reaction medium on the reaction of cytochrome C with cytochrome aa3 was investigated. With increasing epsilon the second-order rate constant decreased.     

Establishment and Evaluation of the Novel Tetramethylammonium‐L‐Hydroxyproline Chiral Ionic Liquid Synergistic System Based on Clindamycin Phosphate for Enantioseparation by Capillary Electrophoresis

Much attention has been paid to chiral ionic liquids (ILs) in analytical chemistry, especially its application in capillary electrophoresis (CE) enantioseparation. However, the investigation of chiral ionic liquids synergistic systems based on antibiotic chiral selectors has been reported in only one article. In this work, a novel chiral ionic liquid, tetramethylammonium‐L‐hydroxyproline (TMA‐L‐Hyp), was applied for the first time in CE chiral separation to evaluate its potential synergistic effect with clindamycin phosphate (CP) as the chiral selector. As observed, significantly improved separation was obtained in this TMA‐L‐Hyp/CP synergistic system compared to TMA‐L‐Hyp or a CP single system. Several primary factors that might influence the separation were investigated, including CP concentration, TMA‐L‐Hyp concentration, buffer pH, types and concentrations of organic modifier, applied voltage, and capillary temperature. The best results were obtained with a 40 mM borax buffer (pH 7.6) containing 30 mM TMA‐L‐Hyp, 80 mM CP, and 20% (v/v) methanol, while the applied voltage and temperature were set at 20 kV and 20°C, respectively. Chirality 27:598–604, 2015. © 2015 Wiley Periodicals, Inc.     

Photodegradation and Stabilization of Betamethasone-17 Valerate in Aqueous/Organic Solvents and Topical Formulations

The effects of solvent [acetonitrile, methanol, and acetonitrile/water mixture (20:80, v/v)], buffer concentration (phosphate buffer, pH 7.5), ionic strength and commonly employed adjuvants on the photodegradation of betamethasone-17 valerate in cream and gel formulations have been studied on exposure to UV light (300–400 nm). A validated high-performance liquid chromatography method has been used to determine the parent compound and its photodegraded products. The photodegradation data in the studied solvents showed greater decomposition of the drug in solvents with a lower dielectric constant. A comparatively higher rate of photodegradation was observed in the cream formulation compared to that for the gel formulation. The kinetic treatment of the photodegradation data revealed that the degradation of the drug follows first-order kinetics and the apparent first-order rate constants for the photodegradation reactions, in the media studied, range from 1.62 to 11.30 × 10⁻³ min⁻¹. The values of the rate constants decrease with increasing phosphate concentration and ionic strength which could be due to the deactivation of the excited state and radical quenching. The second-order rate constant (k′) for the phosphate ion-inhibited reactions at pH 7.5 has been found to be 5.22 × 10⁻² M⁻¹ s⁻¹. An effective photostabilization of the drug has been achieved in cream and gel formulations with titanium dioxide (33.5–42.5%), vanillin (21.6–28.7%), and butyl hydroxytoluene (18.2–21.6%).Key words: betamethasone-17 valerate, creams and gels, kinetics, photodegradation, photostabilization     

NMR and CD conformational studies of the C-terminal 16-peptides of Pseudomonas aeruginosa c551 and Hydrogenobacter thermophilus c552 cytochromes.

The 16-amino acid sequences of the C-terminal helices of the homologous bacterial cytochromes c551 from Pseudomonas aeruginosa and C552 from Hydrogenobacter thermophilus were synthesized and their solution structure studied. Circular dichroism and NMR experiments in aqueous solution have shown the presence of alpha-helices and 3(10)-helices. The populations of helical structures in phosphate buffer, pH 3.5, 293 K, were 21% for c551 and 20% for c552, but increased to 56.7 and 48%, respectively, in 50% aqueous 2,2,2-trifluoroethanol. An isodichroic point was observed at 203 nm in CD spectra for the helix/coil transition in mixtures of water/2,2,2-trifluoroethanol. NMR spectra in phosphate buffer show the presence of both alpha- and 3(10)-helical structures. In water/2,2,2-trifluoroethanol (50:50) alpha-helices are predominant. CD temperature-dependency studies indicate that both peptides exhibit the same cooperativity for the transition in water/2,2,2-trifluoroethanol (50:50). The experimental data show that the amino acid substitutions do not favor heat resistance of the secondary structure of the c552 C-terminal helix at the local level. Instead, they optimize nonlocal contacts of the polypeptide chain, which stabilize the tertiary structure in the native protein.     

Detection of glycosaminoglycans at the one-nanogram level by 125I-cytochrome c

The basic protein cytochrome c forms stable ionic complexes with all known glycosaminoglycans. When labeled with 125I, cytochrome c is capable of detecting exceptionally small quantities of glycosaminoglycans. Subsequent to electrophoresis on cellulose acetate strips using pyridine formate buffer at pH 3, followed by ethanol fixation, and treatment with 125I-cytochrome c, all the known glycosaminoglycans are detected at minimum levels of 1 ng/0.25-microliter application. The method can be used for quantification of glycosaminoglycans in other electrophoretic buffer systems also.     

Comparison of performance of C18 monolithic rod columns and conventional C18 particle-packed columns in liquid chromatographic determination of Estrogel and Ketoprofen gel

The performance of monolithic HPLC columns Chromolith (made by Merck, Germany) and conventional C18 columns Discovery (Supelco, Sigma-Aldrich, Prague, Czech Republic) was tested and the comparison for two topical preparations Ketoprofen gel and Estrogel gel was made. The composition of mobile phases - for Ketoprofen analysis a mixture of acetonitrile, water and phosphate buffer adjusted to pH 3.5 (40:58:2) and for Estrogel analysis a mixture of acetonitrile, methanol, water (23:24:53) - was usually not optimal for analyses at all types of columns. Thus an adjustment of components ratio was necessary for sufficient resolution of the compounds analysed. Various flow rates (1.0-5.0 ml/min) and mobile phases (usually increasing ratio of water content) were applied. Determination of active substances, preservatives and impurities and comparison of retention times and system suitability test parameters was accomplished. For Estrogel gel, following chromatographic conditions were found: using Chromolith Flash RP-18e monolith column, mobile phase was acetonitrile, methanol, water (13:24:63, v/v/v) and flow-rate 3.0 ml/min. Using monolith column ChromolithSpeedROD RP-18e, the mobile phase was acetonitrile, methanol, water (18:24:58, v/v/v) and flow-rate 4.0 ml/min. For the monolith column Chromolith Performance RP-18e, the mobile phase was acetonitrile, methanol, water (23:24:53, v/v/v), flow-rate 3.0ml/min. Analysis of Ketoprofen gel gave the best results using following analytical conditions: for monolith column Chromolith Flash RP-18e, mobile phase as a mixture of acetonitrile, water, phosphate buffer pH 3.5 (30:68:2, v/v/v) was used, at flow-rate 2.0 ml/min. For ChromolithSpeedROD RP-18e monolith column, acetonitrile, water, phosphate buffer pH 3.5 (35:63:2, v/v/v) was used as a mobile phase at flow-rate 3.0 ml/min. Chromolith Performance RP-18e gave the best results using mobile phase acetonitrile, water, phosphate buffer pH 3.5 (30:68:2, v/v/v) at the flow-rate 5.0 ml/min. It was proved that monolith columns, due to their porosity and low back-pressure, can save analysis time by about a factor of three with sufficient separation efficiency. Thus, for example 11 min long analysis can be performed in 4 min with comparable results.     

A complex of cardiac cytochrome c1 and cytochrome c.

The interactions of cytochrome c1 and cytochrome c from bovine cardiac mitochondria were investigated. Cytochrome c1 and cytochrome c formed a 1:1 molecular complex in aqueous solutions of low ionic strength. The complex was stable to Sephadex G-75 chromatography. The formation and stability of the complex were independent of the oxidation state of the cytochrome components as far as those reactions studied were concerned. The complex was dissociated in solutions of ionic strength higher than 0.07 or pH exceeding 10 and only partially dissociated in 8 M urea. No complexation occurred when cytochrome c was acetylated on 64% of its lysine residues or photooxidized on its 2 methionine residues. Complexes with molecular ratios of less than 1:1 (i.e. more cytochrome c) were obtained when polymerized cytochrome c, or cytochrome c with all lysine residues guanidinated, or a "1-65 heme peptide" from cyanogen bromide cleavage of cytochrome c was used. These results were interpreted to imply that the complex was predominantly maintained by ionic interactions probably involving some of the lysine residues of cytochrome c but with major stabilization dependent on the native conformations of both cytochromes. The reduced complex was autooxidizable with biphasic kinetics with first order rate constants of 6 X 10(-5) and 5 X U0(-5) s-1 but did not react with carbon monoxide. The complex reacted with cyanide and was reduced by ascorbate at about 32% and 40% respectively, of the rates of reaction with cytochrome c alone. The complex was less photoreducible than cytochrome c1 alone. The complex exhibited remarkably different circular dichroic behavior from that of the summation of cytochrome c1 plus cytochrome c. We concluded that when cytochromes c1 and c interacted they underwent dramatic conformational changes resulting in weakening of their heme crevices. All results available would indicate that in the complex cytochrome c1 was bound at the entrance to the heme crevice of cytochrome c on the methionine-80 side of the heme crevice.     

Methionine-80-sulfoxide cytochrome c: preparation, purification and electron-transfer capabilities

In order to explore the electron-transferring properties of methionine-80-sulfoxide cytochrome c, the pure, chromatographically homogeneous methionine-80-sulfoxide cytochrome c was previously published procedure (Ivanetich, K.M., Bradshaw, J.J. and Kaminsky, L.S. (1976) Biochemistry 15, 1144-1153) was found to produce a mixture of products. In the pure derivative, visible spectroscopy indicates that the 695 nm band indicative of the Met-80-Fe coordination is missing, amino acid analysis indicates that only one methionine is modified to the sulfoxide, and the E0' is found to be 240 mV vs. N.H.E. For succinate cytochrome c reductase activity, the Km for modified cytochrome was about one-ninth that of the native protein, while the maximum turnover number of the reductase with the modified protein was only about 54% of that with native protein. In contrast, the activity with cytochrome oxidase measured polarographically using ascorbate and TMPD under two different buffer/pH conditions, gave Km values that were very similar for both the native and modified cytochromes c, but the maximum turnover numbers of the oxidase with the modified protein were less than 40% of native in either buffer. It is concluded that the Met-80-sulfoxide cytochrome c in the reduced form is able to maintain substantially its heme crevice structure and thus maintain Km values similar to those of native protein. However, the low maximum turnover numbers for oxidase activity with the modified protein in the reduced state indicate that electron transfer itself has been significantly decreased, probably because the parity of acid/base and electrostatic interactions of Met-80 sulfur with the Fe in the two redox states has been disrupted.     

Influence of solvent and of cation size on the conformations of lasalocid A-lanthanide(III) ion complexes: circular dichroism and fluorescence studies

The interaction of lanthanide(III) nitrates (La3+ to Lu3+) with the carboxylic ionophore lasalocid A (LS) has been studied by circular dichroism (CD) and fluorescence spectroscopic techniques in acetonitrile and in methanol. Analysis of the CD data in acetonitrile has revealed the coexistence of both 1:1 (ionophore:cation) and 2:1 complexes in solution. For 1.22 A greater than ionic radius greater than 1.13 A, 1:1 complexes are preferred, and for 1.13 A greater than ionic radius greater than 1.03 A, 2:1 complexes are preferred. Induced CD bands for Ln3+ ions have been observed upon binding to LS in acetonitrile. The LS-Ln3+ complexes are less stable in methanol than in acetonitrile. CD spectral changes showed that the conformations of the complexes in methanol are different from those in acetonitrile. The complexes have rather open conformations in methanol compared to those in acetonitrile. The results underscore the importance of ionic radius, solvent environment, and ionization state of LS in determining the conformations of the ionophore-cation complexes.     

SPE-HPLC法快速检测发酵液中紫杉醇的含量

针对红豆杉内生真菌发酵液中紫杉醇的含量测定进行探讨,以建立快速高效低耗的检测方法.采用C_(18)固相萃取柱对紫杉醇进行吸附,用不同浓度的甲醇-乙酸铵和甲醇分别作为洗脱剂对其进行洗脱,比较两者的洗脱效果,洗脱液用HPLC进行检测;色谱条件为:流动相甲醇(v):水(v):乙腈(v)=20: 45: 35,流速:0.70 ml/min,检测波长:227 nm.结果表明,浓度为80%的甲醇溶液洗脱效果较好,紫杉醇的回收率为87.6%.     

Mitochondrial release of pro-apoptotic proteins: electrostatic interactions can hold cytochrome c but not Smac/DIABLO to mitochondrial membranes

A key step in the initiation of apoptosis is the release from the mitochondrial intermembrane space of cytochrome c and other pro-apoptotic proteins such as Smac/DIABLO, Omi/HtrA2, apoptosis-inducing factor (AIF), and endonuclease G (EndoG). Discrepancies have arisen, however, as to whether all these proteins are released in different systems. Our results suggest that failure to observe cytochrome c release may be due to the use of different buffers because after permeabilization by caspase-8 cleaved human Bid (tBid), cytochrome c dissociation from mitochondria was highly dependent on ionic strength and required 50-80 mm KCl, NaCl, or LiCl. In addition, mitochondria isolated from apoptotic cells using low ionic strength buffer bound a greater proportion of endogenous cytochrome c. In contrast to cytochrome c, Smac/DIABLO and Omi/HtrA2 were released independent of ionic strength, and AIF and EndoG behaved as if they are exposed to the intermembrane space but tethered to or within the inner membrane. AIF and EndoG were also not released by active caspases, which suggests their involvement in apoptosis may be limited. In summary, whereas tBid permeabilizes the outer membrane to cytochrome c, Smac/DIABLO, and Omi/HtrA2, the release of cytochrome c during apoptosis will be underestimated unless sufficient ionic strength is maintained to overcome the electrostatic association of cytochrome c with membranes.     

Determination of lamotrigine in whole blood with on line solid phase extraction

A simple, sensitive and reproducible method was developed for the determination of lamotrigine in whole blood with on-line solid phase extraction followed by HPLC separation with UV detection. Whole blood samples were diluted 1:1 with water and then injected directly on a clean-up column dry-packed with 40microm C8 silica and separated on a C18 reversed-phase column (150x4.6mm) at room temperature. The extraction column was activated with methanol and conditioned with phosphate buffer of pH 4.5. Mobile phases consisted of phosphate buffer of pH 4.5 for the extraction column and of phosphate buffer of pH 4.5 - acetonitrile (60:40, v/v) for the analytical column. At a flow rate of 1.0ml/min and a connection time of 1.0min, the complete cycle time was 10.0min. Detection was carried out at 260nm. No internal standard was necessary. The method was linear over concentration range 0.2-20.0microg/ml for lamotrigine. Recovery was 98%. Within-day and between-day coefficients of variation ranged from 1.8 to 6.7%.     

Optimization of methanol biosynthesis from methane using Methylosinus trichosporium OB3b

Methylosinus trichosporium OB3b oxidized methane to methanol in the presence of a high concentration of Cu2+. Further oxidation of methanol to formaldehyde was prevented by adding 200 mM NaCl which acted as a methanol dehydrogenase H inhibitor. The bacterium, 0.6 mg dry cell ml(-1), in methane/air (1:4, v/v) at 25 degrees C in 12.9 mM phosphate buffer (pH 7) containing 20 mM sodium formate and 200 mM NaCl accumulated 7.7 mM methanol over 36 h.     

Binding of horse heart cytochrome c to yeast porphyrin cytochrome c peroxidase: a fluorescence quenching study on the ionic strength dependence of the interaction

The binding of horse heart cytochrome c to yeast cytochrome c peroxidase in which the heme group was replaced by protoporphyrin IX was determined by a fluorescence quenching technique. The association between ferricytochrome c and cytochrome c peroxidase was investigated at pH 6.0 in cacodylate/KNO3 buffers. Ionic strength was varied between 3.5 mM and 1.0 M. No binding occurs at 1.0 M ionic strength although there was a substantial decrease in fluorescence intensity due to the inner filter effect. After correcting for the inner filter effect, significant quenching of porphyrin cytochrome c peroxidase fluorescence by ferricytochrome c was observed at 0.1 M ionic strength and below. The quenching could be described by 1:1 complex formation between the two proteins. Values of the equilibrium dissociation constant determined from the fluorescence quenching data are in excellent agreement with those determined previously for the native enzyme-ferricytochrome c complex at pH 6.0 by difference spectrophotometry (J. E. Erman and L. B. Vitello (1980) J. Biol. Chem. 225, 6224-6227). The binding of both ferri- and ferrocytochrome c to cytochrome c peroxidase was investigated at pH 7.5 as functions of ionic strength in phosphate/KNO3 buffers using the fluorescence quenching technique. The binding in independent of the redox state of cytochrome c between 10 and 20 mM ionic strength, but ferricytochrome c binds with greater affinity at 30 mM ionic strength and above.     

Two-dimensional high-performance liquid chromatographic determination of 5-hydroxyindoleacetic acid and homovanillic acid in urine

The biomedically and neurochemically important compounds 5-hydroxyindoleacetic acid (5-HIAA) and homovanillic acid (HVA) have been simultaneously determined in human urine after reverse-phase two-dimensional high-performance liquid chromatography. A 10-fold-diluted urine sample (20 microliters) is first separated on a C18 column (30 X 0.39 cm) using an 85% pH 6.0 phosphate buffer/15% methanol solvent system. The elution volume containing both 5-HIAA and HVA (Rt approximately 3 min) is collected. Recoveries (mean +/- SD) for this purification step, which is monitored using fluorometric detection, were usually above 90%. After acidification of the approximately 2 ml collected fraction, 100 microliters is reinjected on a C18 column and separated (Rt: 5-HIAA, 4 min; HVA 5.5 min) using an 80% pH 3.5 phosphate buffer/20% methanol mobile phase. The compounds are determined by flow-through amperometry with absolute detection limits of approximately 25 pg. Both 5-HIAA and HVA are well resolved from other electroactive species present and are easily determined at normal and greatly reduced concentrations in human urine.     

Photoreduction of cytochrome c1.

1. Ferricytochrome c1 solution was reduced completely between pH 7 and 10 by illumination under anaerobic conditions. Photoreduction was not affected by the ionic strength of the medium. However, it did not take place at pH lower than 6 or higher than 10, or in the presence of p-hydroxymercuric benzoate. The ferricyanide-reoxidized photoreduced c1 was not further reduced upon illumination. The reductant was most probably a specific sulfhydryl group in the subunit containing the heme of the cytochrome since this subunit contained one less p-HMB-titratable group in the photoreduced sample than in the untreated preparation. 2. The photoreduced cytochrome c1 showed the same spectra as the native cytochrome, and was not reactive with carbon monoxide. The equilibrium constant of the reaction c12+ + c3+ equilibrium c13+ + c2+ for the photoreduced c1 was found to be slightly lower (Keq = 2.6) than that for the native c1 (Keq = 3.5). The antimycin A-sensitive electron acceptor activity of ferricyanide-reoxidized photoreduced c13+ catalyzed by succinate-cytochrome c reductase was about 80% of that of the native c1. 3. A somewhat simplified method for isolation of cytochrome c1 was developed. Anaerobic ammonium sulfate fractionation and calcium phosphate gel chromatography were still used in order to achieve the purity level of about 25 nmol of heme/mg of protein. The cytochrome c1 prepared by this procedure showed the same properties tested as that by the beta-mercaptoethanol method (Yu, C.A., Yu, L., and King, T.E. (1972) J. Biol. Chem. 247, 1012-1019).     

High-performance liquid chromatographic determination of midazolam in rat brain

A high-performance liquid chromatography method for the determination of midazolam in rat brain is described. Midazolam and the internal standard halazepam were extracted with toluene and analyzed isocratically on a reversed-phase column with a mobile phase consisting of methanol, acetonitrile and potassium phosphate buffer. Detection was monitored by ultraviolet absorption at 240 nm. The standard curves were linear over the range of 25--350 ng midazolam per 50 mg brain tissue. The day-to-day coefficient of variation ranged from 1.7 to 6.9%. The limit of quantification was 80 ng/g brain tissue. The method is rapid, simple and reproducible for brain analysis.     

Simultaneous determination of three carbapenem antibiotics in plasma by HPLC with ultraviolet detection

A simple, precise and accurate high-performance liquid chromatography (HPLC) method using ultraviolet (UV) detection has been developed for simultaneous determination of carbapenem antibiotics: imipenem, meropenem and ertapenem in human plasma. Samples were spiked with ceftazidime as internal standard and proteins were precipitated by acetonitrile. Separation was achieved on a C8 column with a mobile phase composed of phosphate buffer 0.1M (pH 6.8) and methanol in gradient elution mode. Detection was performed at 298 nm. Calibration curves were linear from 0.5 to 80 mg/L for each compound, with correlation coefficients over 0.997. Intra- and inter-day validation studies showed accuracy between -4.5 and 8.1% and precision below 10.4%. Mean recoveries were 82.2, 90.8 and 87.7% for imipenem, meropenem and ertapenem, respectively. This method provides a useful tool for the therapeutic drug monitoring of carbapenems.