Application of PEG-chitosan copolymers for regulation of catalytic properties of enzymes for medical application using recombinant Erwinia carotovora L-asparaginase as an example

A new approach to the regulation of catalytic properties of medically relevant enzymes has been proposed using the novel recombinant preparation of L-asparaginase from Erwinia carotovora (EwA), a promising antitumor agent. New branched co-polymers of different composition based on chitosan modified with polyethylene glycol (PEG) molecules, designated as PEG-chitosan, have been synthesized. PEG-chitosan copolymers were further conjugated with EwA. In order to optimize the catalytic properties of asparaginase two types of conjugates differing in their architecture have been synthesized: (1) crown-type conjugates were synthesized by reductive amination reaction between the reducing end of the PEG-chitosan copolymer and enzyme amino groups; (2) multipoint-conjugates were synthesized using the reaction of multipoint amide bond formation between PEG-chitosan amino groups and carboxyl groups of the enzyme in the presence of the Woodward’s reagent. The structure and composition of these conjugates were determined by IR spectroscopy. The content of the copolymers in the conjugates was controlled by the characteristic absorption band of C-O-C bonds in the PEG structure at the frequency of 1089 cm^?1. The study of catalytic characteristics of EwA preparations by conductometry showed that at physiological pH values the enzyme conjugates with PEG-chitosan with optimized structure and the optimal composition demonstrated 5–8-fold higher catalytic efficiency (k _cat/K _m) than the native enzyme. To certain extent, this can be attributed to favorable shift of pH-optima in result of positively charged amino-groups introduction in the vicinity of the active site. The proposed approach, chito-pegylation, is effective for regulating the catalytic and pharmacokinetic properties of asparaginase, and is promising for the development of prolonged action dosage forms for other enzyme therapeutics.     

Supramolecular gene delivery vectors showing enhanced transgene expression and good biocompatibility

Soluble supramolecular inclusion complexes were formed by threading alpha-cyclodextrin (alpha-CD) molecules over poly(ethylene glycol) (PEG) and poly(epsilon-caprolactone) (PCL) chains of ternary block copolymers of PEG, PCL and polyethylenimine (PEI). Characteristic shifts of PCL absorptions in FTIR, (1)H NMR and UV spectra strongly suggest that alpha-CD is threaded over PEG and PCL blocks. Due to the reduced hydrophobic interaction between PCL blocks, the resulting supramolecular complexes displayed a dramatically increased solubility, in comparison with the ternary block copolymers. Their ability to complex DNA was almost as efficient as that of branched PEI 25 kDa, as shown in the ethidium bromide fluorescence quenching experiments. Resulting DNA polyplexes displayed a size of around 200 nm and a neutral surface charge. Microscopy studies in 3T3 fibroblasts revealed an efficient cellular uptake. Transfection efficiencies of inclusion complexes were in the same order of magnitude as PEI. In contrast to PEI a 100x lower toxicity was observed by MTT-assay, allowing the administration of nitrogen-to-phosphate ratios of up to 20. These new gene delivery systems merit further characterization under in vivo conditions.     

Synthesis and self-assembly of well-defined poly(amino acid) end-capped poly(ethylene glycol) and poly(2-methyl-2-oxazoline)

Poly(ethylene glycol) (PEG) and poly(2-methyl-2-oxazoline) (PMOx) are water-soluble, biocompatible polymers with stealth hemolytic activities. Poly(amino acid) (PAA) end-capped PEG and PMOx were prepared using amino-terminated derivatives of PEG and PMOx as macroinitiators for the ring-opening polymerization of γ-benzyl protected l-glutamate N-carboxyanhydride and S-benzyloxycarbonyl protected l-cysteine N-carboxyanhydride, respectively, in the presence of urea, at room temperature. The molecular weight of the PAA moiety was kept between M(n) = 2200 and 3000 g mol(-1). PMOx was polymerized by cationic ring-opening polymerization resulting in molecular weights of M(n) = 5000 and 10,000 g mol(-1), and PEG was a commercial product with M(n) = 5000 g mol(-1). Here, we investigate the self-assembly of the resulting amphiphilic block copolymers in water and the effect of the chemical structure of the block copolymers on the solution properties of self-assembled nanostructures. The PEG-block-poly(amino acid), PEG-b-PAA, and PMOx-block-poly(amino acid), PMOx-b-PAA, block copolymers have a narrow and monomodal molecular weight distribution (PDI < 1.3). Their self-assembly in water was studied by dynamic light scattering and fluorescence spectroscopy. In aqueous solution, the block copolymers associate into particles with hydrodynamic radii (R(H)) ranging in size from R(H) 70 to 130 nm, depending on the block copolymer architecture and the polymer molecular weight. Larger R(H) and critical association concentration values were obtained for copolymers containing poly(S-benzyloxycarbonyl-l-cysteine) compared to their poly(γ-benzyl-L-glutamate) analogue. FTIR investigations revealed that the poly(γ-benzyl-L-glutamate) block adopts a helical conformation, while the poly(S-benzyloxycarbonyl-L-cysteine) block exists as β-sheet.     

Synthesis of polyethylene glycol (PEG) derivatives and PEGylated-peptide biopolymer conjugates

We synthesized a library of 50 poly(ethylene glycol) (PEG) derivatives to expand the extent of conjugation with biologically active molecules (biopolymers, peptides, drugs, etc.) and biomaterial substrates. The formation of PEG derivatives was confirmed with HPLC, (1)H and (13)C NMR. PEG derivatives were polymerized into networks in order to study the role of PEG and terminal functional groups in modulating the hydrophilicity of biomaterials and cell-biomaterial interaction. The resulting surface hydrophilicity and the number of adhered fibroblasts were primarily dependent on the PEG concentration with the molecular weight and the terminal functional group of PEG derivatives being less important. One of PEG derivatives, PEG-bis-glutarate, was utilized to link peptide sequences to gelatin backbone in the formation of novel biomedical hydrogels. PEG-peptide conjugates were characterized by mass spectroscopy. PEG-peptide modified gelatins were characterized by gel permeation chromatography.     

Synthesis, characterization, and morphology studies of biodegradable amphiphilic poly[(R)-3-hydroxybutyrate]-alt-poly(ethylene glycol) multiblock copolymers

Novel biodegradable amphiphilic alternating block copolymers based on poly[(R)-3-hydroxybutyrate] (PHB) as biodegradable and hydrophobic block and poly(ethylene glycol) (PEG) as hydrophilic block (PHB-alt-PEG) were successfully synthesized through coupling reaction. Their chemical structures have been characterized by using gel permeation chromatography, (1)H nuclear magnetic resonance, and Fourier transform infrared spectroscopy. Differential scanning calorimetry (DSC) analysis revealed that both PHB and PEG blocks in PHB-alt-PEG block copolymers can crystallize to form separate crystalline phase except in those with a short PEG block (M(n) 600) only PHB crystalline phase has been observed. However, due to the mutual interference from each other, the melting transition of both PHB and PEG crystalline phases shifted to lower temperature with lower crystallinity in comparison with corresponding pure PHB and PEG. The crystallization behavior of PHB block and PEG block has also been studied by X-ray diffraction, and the results were in good agreement with those deduced from DSC study. The surface morphologies of PHB-alt-PEG block copolymer thin films spin-coated on mica have been visualized by atomic force microscopy with tapping mode, indicating formation of laterally regular lamellar surface patterns. Static water contact angle measurement revealed that surface hydrophilicity of these spin-coated thin films increases with increasing PEG block content.     

Characterization of site-specific ScFv PEGylation for tumor-targeting pharmaceuticals

New radiopharmaceuticals are possible using site-specific conjugation of small tumor binding proteins and poly(ethylene glycol) (PEG) scaffolds to provide modular multivalent, homo- or heterofunctional cancer-targeting molecules having preferred molecular size, valence, and functionality. Residence time in plasma can be optimized by modification of the size, number, and charge of the protein units. However, random PEG conjugation (PEGylation) of these small molecules via amine groups has led to variations of structural conformation and binding affinity. To optimize PEGylation, scFvs have been recombinantly produced in a vector that adds an unpaired cysteine (c) near the scFv carboxy terminus (scFv-c), thus providing a specific site for thiol conjugation. To evaluate the general applicability of this unpaired cysteine for PEGylation of scFv-c, conjugation efficiency was determined for four different scFvs and several PEG molecules having thiol reactive groups. The effect of the PEG molecular format on scFv-c PEG malignant cell binding was also addressed. ScFvs produced as scFv-c and purified by anti E-TAG affinity chromatography were conjugated using PEG molecules with maleimide (Mal) or o-pyridyl disulfide (OPSS). Conjugations were performed at pH 7.0, with 2 molar excess TCEP/scFv and PEG-(Mal) or PEG-OPSS, using 5:1 (PEG/scFv). PEG-Mal conjugation efficiency was also evaluated with 1:5 (PEG/scFv). PEGylation efficiency was determined for each reaction by quantitation of the products on SDS-PAGE. ScFv-c conjugation with unifunctional maleimide PEGs resulted in PEG conjugates incorporating 30-80% of the scFv-c, but usually above 50%. Efficiency of scFv-c conjugation to both functional groups of the bifunctional PEG-(Mal)2 varied between the PEG and scFv-c molecules studied. A maximum of 45% of scFv-c protein was conjugated as PEG- (scFv-c)2 using the smallest PEG-(Mal)2 (2 kDa). No significant increase in scFv-c conjugation was observed by the use of greater than a 5 molar excess of PEG/scFv-c. Under the same conjugation conditions, PEG as OPSS yielded less than 10% PEG-scFv-c. PEG-(scFv)2 conjugates had increased binding in ELISA using malignant cell membranes, when compared with unmodified scFv-c. PEGylated-scFv binding was comparable with unmodified scFv-c. In summary, scFv-c can be PEGylated in a site-specific manner using uni- or bivalent PEG-Mal, either linear or branched. ScFv-c was most efficiently conjugated to smaller PEG-Mal molecules, with the smallest, 2 kDa PEG-Mal, usually PEGylating 60-90% of the scFv-c. ScFv-c conjugation to form PEG-(scFv-c)2 reached greatest efficiency at 45%, and its purified form demonstrated greater binding than the corresponding scFv-c.     

PAN- b- PEG- b- PAN 两亲性嵌段共聚物的合成及热稳定性

以2-溴丙酰溴封端的聚乙二醇（PEG2000）为大分子引发刺,溴化亚铜（CuBr）为催化剂,2,2＇-联吡啶（bpy）为配体,碳酸乙烯酯（EC）为溶剂,采用原子转移自由基聚合（ATRY）法合成了两亲性嵌段共聚物PAN-b-PEG-b-PAN。通过FTIR、^1HNMR和GPC对产物的结构进行了表征,并运用TGA对PAN-b-PEG-b-PAN两亲性嵌段共聚物的热稳定性进行了研究。结果表明：PAN-b-PEG-b-PAN的热稳定性较纯PEG要高,且随着PAN-b-PEG-b-PAN两亲性嵌段共聚物的分子量的增加,此嵌段共聚物的热稳定性增强。它的起始的分解温度为275℃,在275℃-450℃失重较少,失重率约为15％,在400℃-450℃迅速分解,失重率为60％左右。     

Poly(ethylene glycol-co-allyl glycidyl ether)s: a PEG-based modular synthetic platform for multiple bioconjugation

A series of random copolymers comprising ethylene oxide (EO) and 0-100% allyl glycidyl ether (AGE) has been prepared by anionic ring-opening polymerization with molecular weights between 5000 and 13,600 g/mol and polydispersity indices in the range of 1.04-1.19. As key for the homogeneity of the PEG conjugates, real-time 1H NMR polymerization kinetics, 13C NMR analysis of triad sequence distribution, and analysis of the thermal behavior by differential scanning calorimetry (DSC) revealed a distinctive random copolymer structure. Via thiol-ene coupling (TEC), showing mainly "click" characteristics and nearly quantitative yields, PEG derivatives with multiple amino, carboxy, or hydroxy functionalities have been prepared, providing suitable reactivities for further attachment. Without further modification, P(EO-co-AGE)s were conjugated with cysteine or the tripeptide glutathione (GSH) via TEC, resulting in well-defined hybrid materials with multiple peptide units conjugated to the PEG backbone. The results demonstrate superior loading capacity of the copolymers in comparison to the PEG homopolymer.     

Size fractionation of double-stranded DNA by precipitation with polyethylene glycol

We show that DNA molecules of differing molecular mass are separable by selective precipitation with polyethylene glycol (PEG+.. Higher molecular mass DNA precipitates at lower PEG concentrations than lower molecular mass DNA. Double-stranded DNA can be fractionated at least in the range of 3 times 10-7 to 1 times 10-5 daltons. The effects on PEG concentration, sodium chloride concentration, DNA concentration, pH, divalent ions, precipitation time, and centrifugal force have been determined. These studies show PEG precipitation offers a size fractionation method for DNA which is convenient, of high capacity, and applicable over a wide range of conditions. However, resolution is not high and separation of two species approaches 100% only if they differ in molecular mass by at least a factor of two.     

Synthesis and characterization of star poly(epsilon-caprolactone)-b-poly(ethylene glycol) and poly(L-lactide)-b-poly(ethylene glycol) copolymers: evaluation as drug delivery carriers

Two types of 32 arm star polymers incorporating amphiphilic block copolymer arms have been synthesized and characterized. The first type, stPCL-PEG 32, is composed of a polyamidoamine (PAMAM) dendrimer as the core with radiating arms having poly(epsilon-caprolactone) (PCL) as an inner lipophilic block in the arm and poly(ethylene glycol) (PEG) as an outer hydrophilic block. The second type, stPLA-PEG 32, is similar but with poly(L-lactide) (PLA) as the inner lipophilic block. Characterization with SEC, (1)H NMR, FTIR, and DSC confirmed the structure of the polymers. Micelle formation by both star copolymers was studied by fluorescence spectroscopy. The stPCL-PEG 32 polymer exhibited unimolecular micelle behavior. It was capable of solubilizing hydrophobic molecules, such as pyrene, in aqueous solution, while not displaying a critical micelle concentration. In contrast, the association behavior of stPLA-PEG 32 in aqueous solution was characterized by an apparent critical micelle concentration of ca. 0.01 mg/mL. The hydrophobic anticancer drug etoposide can be encapsulated in the micelles formed from both polymers. Overall, the stPCL-PEG 32 polymer exhibited a higher etoposide loading capacity (up to 7.8 w/w % versus 4.3 w/w % for stPLA-PEG 32) as well as facile release kinetics and is more suitable as a potential drug delivery carrier.     

Removal of proteases from <Emphasis Type="Italic">Clostridium perfringens</Emphasis> fermented broth by aqueous two-phase systems (PEG/citrate)

In order to reduce the toxicity of Clostridium perfringens fermentation broths used in vaccine preparation, we developed two-phase aqueous systems for removal of toxin-activating proteases. Removal of the proteases inhibits the conversion of protoxin to active toxin. In order to establish the conditions under which the phase separation occurs, binodal curves, formed by poly(ethylene glycol) (PEG) and sodium citrate, were investigated at different values of pH and PEG molar mass. A 2⁴-experimental design was used to evaluate the influence of PEG molar mass and concentration, citrate concentration and pH on protease partition coefficient, removal factor and protease removal yield. It has been found that simultaneous increase in PEG molar mass and decrease in citrate concentration remarkably improved the removal factor, whereas the protease removal yield showed an opposite trend. The best conditions for the system under consideration (removal factor of 2.69 and yield of 116%) were obtained at pH 8.0 using PEG molar mass of 8000 g mol⁻¹ and concentrations of PEG and citrate of 24 and 15%, respectively.     

Advances in tagging syngnathids, with the effects of dummy tags on behaviour of Hippocampus guttulatus

Artificial marking and tagging techniques have been used to study movement, population dynamics, behaviour, ecology, survival and growth of at least 25 syngnathid species. External necklace-style tags and injection of visible implant elastomer have been the most used techniques, uniquely identifying hundreds of individual syngnathids to study population dynamics, mortality, behaviour, ecology and growth in at least 13 and 12 species, respectively. Only two studies, both on larger syngnathid species, have tested the use of internal or electronic tags. This new case study reveals that dummy tags, weighing up to 6% of individual body mass, have minimal effect on normal ex situ behaviour of the long-snouted seahorse Hippocampus guttulatus, a smaller syngnathid. In paired aquarium trials, tags did not affect movement, holdfast use or general behavioural state, and only had a short-term effect (1 day) on vertical orientation. Tagged H. guttulatus gained more mass during the 5 day trials, a result which warrants further exploration but indicates that tags did not reduce feeding. This study shows promise for using electronic tagging to study H. guttulatus and similarly sized syngnathids in the wild.     

Sulfonamide-based pH- and temperature-sensitive biodegradable block copolymer hydrogels

Novel pH- and temperature-sensitive biodegradable poly(epsilon-caprolactone-co-lactide)-poly(ethylene glycol) (PCLA-PEG) block copolymers were synthesized with oligomeric sulfamethazine (OSM) end groups (OSM-PCLA-PEG-PCLA-OSM). Aqueous solutions of these block copolymers have shown sol-gel transition behavior upon both temperature and pH changes under physiological conditions (37 degrees C, pH 7.4). The sol-gel transition of these block copolymer solutions was fine-tuned by controlling the PEG length, the hydrophobic to hydrophilic block ratio (PCLA/PEG), and the molecular weight of the sulfamethazine oligomer. Since changes in temperature do not induce gel formation in this pH- and temperature-sensitive block copolymer solution, this hydrogel can be employed as an injectable carrier using a long guide catheter into the body. In addition, the pH of the block copolymer solution showed no change following PCLA degradation over 1 month, and no indication of gel collapse was observed on addition of buffer solution. As such, these properties make the OSM-PCLA-PEG-PCLA-OSM hydrogel an ideal candidate for use as an injectable carrier for certain protein-based drugs known to denature in low-pH environments.     

Acid catalyzed transesterification as a route to poly(3-hydroxybutyrate-co-epsilon-caprolactone) copolymers from their homopolymers

Copolymers of (R)-3-hydroxybutyric acid (HB) and epsilon-caprolactone (CL) with a composition ranging from 28 to 81 mol % of HB were synthesized by transesterification of the corresponding homopolymers in solution in the presence of 4-toluenesulfonic acid. The copolyesters were characterized with regard to their molecular weights, thermal properties, molar compositions, and average block length of repeating units by gel permeation chromatography (GPC), differential scanning calorimetry, (1)H NMR, and (13)C NMR, respectively. Random and microblock copolymers could be obtained depending on experimental conditions, with weight-average molecular weights of up to 20,000. The glass transition temperature decreased from 2 to -42 degrees C as the CL content was increased from 0 to 72 mol %. The melting temperature (T(m)) of the PCL phase decreased from 70 to 46 degrees C as the HB content changed from 0 to 47 mol %, while the T(m) of the PHB phase decreased from 177 degrees C to 163 degrees C as the CL content changed from 0 to 72 mol %. Matrix-assisted laser desorption ionization time-of-flight mass spectra of GPC fractionated samples allowed us to ascertain that copolymers rich in HB units have mostly hydroxyl and carboxyl end groups, while copolymers rich in CL units have mostly tosyl and carboxyl end groups.     

High resolution structures of the 4-4-20 Fab-fluorescein complex in two solvent systems: effects of solvent on structure and antigen-binding affinity.

Three-dimensional structures were determined for three crystal forms of the antigen binding fragment (Fab) of anti-fluorescein antibody 4-4-20 in complex with fluorescein. These included 1) a triclinic (P1) form crystallized in 47% (v/v) 2-methyl-2,4-pentanediol (MPD); 2) a triclinic (P1) form crystallized in 16% (w/v) poly(ethylene glycol), molecular weight 3350 (PEG); and 3) a monoclinic (P21) form crystallized in 16% PEG. Solvent molecules were added to the three models and the structures were refined to their diffraction limits (1.75-A, 1.78-A, and 2.49-A resolution for the MPD, triclinic PEG, and monoclinic PEG forms, respectively). Comparisons of these structures were interesting because 4-4-20 exhibited a lower antigen-binding affinity in 47% MPD (Ka = 1.3 x 10(8) M-1) than in either 16% PEG (Ka = 2.9 x 10(9) M-1) or phosphate-buffered saline (Ka = 1.8 x 10(10) M-1). Even though the solution behavior of the antibody was significantly different in MPD and PEG, the crystal structures were remarkably similar. In all three structures, the fluorescein-combining site was an aromatic slot formed by tyrosines L32, H96, and H97 and tryptophans L96 and H33. In addition, several active site constituents formed an electrostatic network with the ligand. These included a salt link between arginine L34 and one of fluorescein's enolate oxygen atoms, a hydrogen bond between histidine L27d and the second enolic group, a hydrogen bond between tyrosine L32 and the phenylcarboxylate group, and two medium range (approximately 5 A) electrostatic interactions with lysine L50 and arginine H52. The only major difference between the triclinic MPD and PEG structures was the degree of hydration of the antigen-combining site. Three water molecules participated in the above electrostatic network in the MPD structure, while eight were involved in the PEG structure. Based on this observation, we believe that 4-4-20 exhibits a lower affinity in MPD due to the depletion of the hydration shell of the antigen-combining site.     

The use of graft copolymers to inhibit the adhesion of bacteria to solid surfaces

Twelve graft copolymers have been evaluated for their ability to prevent the adhesion of bacteria to substrata. The copolymers had polyethylene glycol (PEG) side-chains (‘teeth’) and a backbone that was either uncharged, acidic, basic or amphoteric. The copolymers were adsorbed onto glass, stainless steel and hydroxyapatite substrata, and 2-hpetri-dish adhesion experiments performed with bacteria isolated from marine (Pseudomonas sp. NCMB 2021), paper mill (S. marcescens NCIB 12211) and oral (S. mutans NCTC 10449) environments. The copolymers containing the most charged groups in the backbone had the most significant effect on bacterial adhesion levels, with anti-adhesive effects up to 99% achieved. An amphoteric copolymer (Compound 12) on glass, and acidic copolymer (Compound 11) on stainless steel and hydroxyapatite gave the most impressive anti-adhesive effects. These copolymers had non-specific bacterial anti-adhesive properties.It is proposed that the graft copolymers adsorbed onto hydrophilic surfaces via their charged backbone in such a way that the PEG side-chains were pointing out into the aqueous phase, and it was this orientation that was responsible for the observed anti-adhesive effect.     

Spectroscopic characterization of polyethyleneglycol modified superoxide dismutase: 1H NMR studies on its Cu2Co2 derivative

Spectroscopic methods have been employed in order to understand the molecular basis of the decrease in enzymatic activity of the antiinflammatory enzyme copper-zinc superoxide dismutase (SOD) following the covalent binding of polyethyleneglycol (PEG) chains to the protein amino-groups. The PEG modification is a general method recently proposed to improve the therapeutic index of enzymes. 1H NMR spectra on the cobalt substituted PEG-modified SOD, Cu2Co2-PEG-SOD, have been recorded. The signals are quite broad with respect to the unmodified enzyme. This has been interpreted on the basis of the effect of molecular weight on the linewidth. The analysis has shown that the histidine hydrogens involved in metal binding at the enzyme active site are the same in both native and PEG-modified SOD. Similarly, circular dichroism and absorption spectra indicate that the overall conformation of the metal clusters is not perturbed upon modification. On the other hand, azide titration shows that the affinity constant of N-3 for SOD is largely reduced upon PEG modification (K = 154 M-1 and 75 M-1 for the native and modified SOD, respectively). These results indicate that the decrease in enzymatic activity upon surface modification with PEG is not caused by a perturbation of the active site geometry, but to a decrease in the channeling of the O2- ion towards the enzyme active site.     

High-throughput Purification and Quality Assurance of Arabidopsis thaliana Proteins for Eukaryotic Structural Genomics

The Center for Eukaryotic Structural Genomics (CESG) has established procedures for the purification of Arabidopsis proteins in a high-throughput mode. Recombinant proteins were fused with (His)(6)-MBP tags at their N-terminus and expressed in Escherichia coli. Using an automated AKTApurifier system, fusion proteins were initially purified by immobilized metal affinity chromatography (IMAC). After cleavage of (His)(6)-MBP tags by TEV protease, (His)(6)-MBP tags were separated from target proteins by a subtractive 2nd IMAC. As a part of quality assurance, all purified proteins were subjected to MALDI-TOF and ESI mass spectrometry to confirm target identity and integrity, and determine incorporation of seleno-methionine (SeMet) and (15)N and (13)C isotopes. The protocols have been used successfully to provide high quality proteins that are suitable for structural studies by X-ray crystallography and NMR.     

Site-specific cross-linking of proteins through tyrosine hexahistidine tags

The genetic addition of hexahistidine (H(6)) tags is widely used to isolate recombinant proteins by immobilized metal-affinity chromatography (IMAC). Addition of a tyrosine residue to H(6) tags enabled proteins to be covalently cross-linked under mild conditions in a manner similar to the natural, site-specific cross-linking of tyrosines into dityrosine. A series of seven hexahistidine tags with tyrosines placed in various positions (H(6)Y tags) were added to the amino terminus of the I28 immunoglobulin domain of the human cardiac titin. The H(6)Y-tagged I28 dimerized in the presence of excess Ni(2+) with a K(D) of 200 microM. Treatment of Ni(2+)-dimerized H(6)Y-I28 with an oxidant, monoperoxyphthalic acid (MMPP) or sodium sulfite, resulted in covalent protein multimerization through chelated Ni(2+)-catalyzed cross-linking of the Y residues engineered into the H(6) tag. The protein oligomerization was observed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS PAGE). The presence of dityrosine in the cross-linked proteins was confirmed by fluorescence emission at 410 nm. Proteins lacking the Y residue in the H(6) tag treated with the same oxidative conditions did not cross-link or exhibit dityrosine fluorescence, despite the presence of an endogenous Y residue. The method may have potential uses in other protein conjugation applications such as protein labeling and interfacial immobilization of proteins on artificial surfaces.