共查询到20条相似文献,搜索用时 31 毫秒
1.
A novel method is described for the preparation of sterile submicron unilamellar liposomes. The method is based on the lyophilization of double emulsions containing disaccharides as lyoprotectants in both the inner and outer aqueous phase. Using various phospholipids or mixtures of lipids as emulsifiers, the double emulsions can be prepared by a two-step emulsification, including hydrophilic agents in the inner aqueous phase or lipophilic agents in the oil phase. Then, the double emulsions are lyophilized after sterilization by passing them through a 0.22-microm pore filter. Rehydration of the lyophilized products results in liposomes with a relatively high encapsulation efficiency (for calcein, 87%; 5-fluorouracil, 19%; flurbiprofen, 93%) and a size below 200 nm measured by the dynamic light scattering technique (DLS) and the atomic force microscopy (AFM). The liposomes were found to be unilamellar from freeze-fracture electron micrographs and X-ray diffraction patterns. In addition, the liposomes can be reconstituted just before use by rehydration of the lyophilized products which are relatively stable. Thus, this reproducible and simple technique can be used to prepare sterilized, submicron unilamellar liposomes with a relatively high encapsulation efficiency, and excellent stability during long-term storage. 相似文献
2.
A novel liposome preparation method is described involving the freeze-drying of oil-in-water emulsions containing sucrose in the aqueous phase as a lyoprotectant and phospholipids in the oil as emulsifiers. The oil-in-water emulsions can be prepared by emulsification and then lyophilized to obtain dry products that will, upon rehydration, form unilamellar liposomes with a mean size of less than 200 nm, as proved by dynamic light scattering, atomic force micrographs, freeze-fracture electron micrographs, and small-angle X-ray scattering (SAXS). With or without combination with active loading, this method can be used successfully to encapsulate amphiphilic or lipophilic drugs into liposomes, although it cannot be applied to hydrophilic drugs. The lyophilized products are stable and can be rehydrated to form liposomes, even after a storage period of 10 months. Based on the encapsulation efficiency for hydrophilic drugs, as well as the scanning electron micrograph and SAXS of the freeze-dried products, a unique liposome formation mechanism is proposed. 相似文献
3.
A novel liposome preparation method is described as freeze-drying of water-in-oil emulsions containing sucrose in the aqueous phase (W) and phospholipids and poly(ethylene glycol) 1500 (PEG) in the oil phase (O). The water-in-oil emulsions were prepared by sonication and then lyophilized to obtain dry products. Upon rehydration, the dry products formed liposomes with a size smaller than 200 nm and an encapsulation efficiency (EE) higher than 60% for model drugs. The presence of lyoprotectant and PEG was found to be a prerequisite for the formation of liposomes with desirable properties, such as a small particle size and high EE. The lyophilates were stable and could be rehydrated to form liposomes without any change in size or EE even after a storage period of 6 months. Also, the lipophilic drug-containing FWE liposomes were stable and could be stored for at least 6 months although the liposomes containing hydrophilic drugs showed significant leakage. Based on the vesicle size and EEs of the model drugs, as well as the scanning electron micrograph (SEM) and small angle X-ray scattering (SAXS) pattern of the lyophilates, a possible mechanism for the liposome formation is proposed. 相似文献
4.
The inverted emulsion method is used to prepare giant liposomes by pushing water-in-oil droplets through the oil/water interface into an aqueous medium. Due to the high encapsulation efficiency of proteins under physiological conditions and the simplicity of the protocol, it has been widely used to prepare various cell models. However, the lamellarity of liposomes prepared by this method has not been evaluated quantitatively. Here, we prepared liposomes that were partially stained with a fluorescent dye, and analyzed their fluorescence intensity under an epifluorescence microscope. The fluorescence intensities of the membranes of individual liposomes were plotted against their diameter. The plots showed discrete distributions, which were classified into several groups. The group with the lowest fluorescence intensity was determined to be unilamellar by monitoring the exchangeability of the inner and the outer solutions of the liposomes in the presence of the pore-forming toxin α-hemolysin. Increasing the lipid concentration dissolved in oil increased the number of liposomes ∼100 times. However, almost all the liposomes were unilamellar even at saturating lipid concentrations. We also investigated the effects of lipid composition and liposome content, such as highly concentrated actin filaments and Xenopus egg extracts, on the lamellarity of the liposomes. Remarkably, over 90% of the liposomes were unilamellar under all conditions examined. We conclude that the inverted emulsion method can be used to efficiently prepare giant unilamellar liposomes and is useful for designing cell models. 相似文献
5.
The inverted emulsion method is used to prepare giant liposomes by pushing water-in-oil droplets through the oil/water interface into an aqueous medium. Due to the high encapsulation efficiency of proteins under physiological conditions and the simplicity of the protocol, it has been widely used to prepare various cell models. However, the lamellarity of liposomes prepared by this method has not been evaluated quantitatively. Here, we prepared liposomes that were partially stained with a fluorescent dye, and analyzed their fluorescence intensity under an epifluorescence microscope. The fluorescence intensities of the membranes of individual liposomes were plotted against their diameter. The plots showed discrete distributions, which were classified into several groups. The group with the lowest fluorescence intensity was determined to be unilamellar by monitoring the exchangeability of the inner and the outer solutions of the liposomes in the presence of the pore-forming toxin α-hemolysin. Increasing the lipid concentration dissolved in oil increased the number of liposomes ∼100 times. However, almost all the liposomes were unilamellar even at saturating lipid concentrations. We also investigated the effects of lipid composition and liposome content, such as highly concentrated actin filaments and Xenopus egg extracts, on the lamellarity of the liposomes. Remarkably, over 90% of the liposomes were unilamellar under all conditions examined. We conclude that the inverted emulsion method can be used to efficiently prepare giant unilamellar liposomes and is useful for designing cell models. 相似文献
6.
ABSTRACTMethods for encapsulation of a drug into liposomes should preferably result in a high encapsulation efficiency and a high encapsulation capacity. Our studies were focussed on the establishment of an efficient encapsulation procedure of the radical scavenging protein, rh-Cu/Zn-SOD, into liposomes with the cross flow injection method. Limitations to increase the encapsulation efficiency are caused by the enclosed aqueous volume, by the lipid concentration, the aspired vesicle size and the final ethanol concentration. Our research was performed to maximize the encapsulation following several strategies of injecting higher lipid concentrations into the aqueous phase. The one way triple technique, a sophisticated preparation procedure is presented, which enables three times higher encapsulation rates in comparison to standard procedures. Additionally, scalability studies demonstrate reproducibility independent of the preparation volume. Vesicle size distribution and encapsulation efficiency remain constant. Furthermore, special attention is paid on reproducibility of prepared liposomes, scale-up and on long term stability of the lipid vesicles. 相似文献
7.
采用逆相蒸发法制备茶多酚脂质体并进行质量评价。通过二次回归旋转组合设计优化茶多酚脂质体制备工艺及配方,对其形态、结构、粒径分布等性质进行考察。研究结果表明,最佳配方为m(大豆卵磷脂):m(胆固醇)=3:1、茶多酚质量浓度为7mg/mL、V(有机相):V(水相)=4:1、磷酸盐缓冲液浓度15mmoL/L,此条件下包封率为50.37%;所制备的茶多酚脂质体形态呈圆球形或椭球形,为大单室脂质体,有效粒径为165.3nm,Zeta电位为-69.3mV。逆相蒸发法制备茶多酚脂质体方法简单可行,所制备的脂质体具有一定缓释性。 相似文献
8.
Methods for encapsulation of a drug into liposomes should preferably result in a high encapsulation efficiency and a high encapsulation capacity. Our studies were focussed on the establishment of an efficient encapsulation procedure of the radical scavenging protein, rh-Cu/Zn-SOD, into liposomes with the cross flow injection method. Limitations to increase the encapsulation efficiency are caused by the enclosed aqueous volume, by the lipid concentration, the aspired vesicle size and the final ethanol concentration. Our research was performed to maximize the encapsulation following several strategies of injecting higher lipid concentrations into the aqueous phase. The one way triple technique, a sophisticated preparation procedure is presented, which enables three times higher encapsulation rates in comparison to standard procedures. Additionally, scalability studies demonstrate reproducibility independent of the preparation volume. Vesicle size distribution and encapsulation efficiency remain constant. Furthermore, special attention is paid on reproducibility of prepared liposomes, scale-up and on long term stability of the lipid vesicles. 相似文献
9.
Small unilamellar liposomes were used in this study of shear stress effects on the trans-bilayer flux of calcium ions (Ca2+). Liposome suspensions were prepared from 99% egg phosphatidylcholine by a microporous filter extrusion technique. The inner aqueous phase of the unilamellar liposomes contained indo-1(5-), a fluorescent indicator of free Ca2+. The external aqueous phase was composed of Hepes-buffered saline containing normal physiological levels of common ionic species. Calcium ion levels were set at 100 nM and 1 mM in the inner and outer aqueous phases, respectively. Liposome suspensions were exposed to graded levels of uniform shear stress in an optically modified rotational viscometer. Intraliposome Ca2+ concentration was estimated from continuous measurement of indo-1(5-) fluorescence. Electronically measured particle size distribution was used to determine liposome surface area for estimation of trans-bilayer Ca2+ flux. Trans-bilayer Ca2+ flux increased linearly with applied shear rate from 27 s-1 to 2700 s-1. Diffusional resistance of the lipid bilayer, not the convective resistance of the surrounding fluid, was the limiting step in the transport of Ca2+. Liposome permeability to Ca2+ increased by nearly two orders of magnitude over the physiologically relevant shear rate range studied. Solute transport in injectable liposome preparations may be dramatically influenced by cardiovascular fluid stress. Solute delivery rates determined in liposomes exposed to static conditions may not accurately predict in vivo, cardiovascular solute transport. 相似文献
10.
Efficient encapsulation of DNA plasmids inside small, neutral liposomes composed of 1,2-dioleoyl-sn-phosphatidylcholine (DOPC), DOPC/DOPE (1,2-dioleoyl-sn-phosphatidylethanolamine) (1:1) and DOPC/DOPE/cholesterol (1:1:1) was achieved by the addition of ethanol and calcium chloride to an aqueous mixture of small unilamellar vesicles (SUVs) and plasmid. Following dialysis against low-salt buffer, the neutral lipid complexes (NLCs) had average effective diameters less than 200 nm and encapsulated up to 80% of the DNA. Optimum Ca(2+) and ethanol concentrations for each lipid mixture were determined by statistically designed experiments and mathematical modeling of trapping efficiency. NLCs are unilamellar, have neutral surface potentials, and retain entrapped DNA at pH 4.0 and in serum at 37 degrees C. The circulation and clearance properties of the complexes following intravenous administration in mice are similar to empty neutral liposomes, and the toxicity of NLCs are expected to be significantly reduced compared to other non-viral gene-delivery systems. The NLC encapsulation method, if it can be combined with effective targeting and endosome-release technologies to achieve efficient and tissue-specific transfection, may represent an important alternative to current systemic gene therapy approaches. 相似文献
11.
Liposomes can been used as potential immunoadjuvants, because they have the ability to elicit both a cellular mediated immune response and a humoral immune response. Studies have shown liposomes to be effective immunopotentiators in hepatitis A and influenza vaccines. For all these purposes, liposomes can be prepared by different methods. After disperging suitable membrane lipids in an aqueous phase and spontaneous formation of multilamellar large vesicles (MLV), mechanical procedures such as ultrasonication, homogenization by a French press or by other high pressure devices and, or extrusion through polycarbonate membranes with defined pore sizes lead to a reduction in size and number of lamellae of the vesicles. A second group of preparation procedures uses suitable detergents, e.g., bile salts or alkylglycosides. A third group of procedures starts with dissolving the lipids in an organic solvent and mixing it with an aqueous phase. The concentration of the organic solvent is then reduced by suitable procedures.Here we present a new technique for the preparation of liposomes with associated membrane proteins, where lipid vesicles are formed immediately after injection into a micellar protein solution. The model membrane protein used for these studies is a truncated recombinant gp41 produced in E. coli. This viral membrane antigen is a possible candidate protein for the establishment of HIV-vaccines.The data presented here, show an efficient and reproducible one step membrane protein encapsulation procedure into liposomes in a closed and sterile containment. We examined encapsulation efficiency, membrane protein conformation and immunogenicity of this possible liposomal vaccine candidate, which can be produced in GMP-compliant quality with the described technique. 相似文献
12.
Double emulsions of the water-in-oil-in-water (W/O/W) type have application in the formulation of reduced-fat food products
and as vehicles for encapsulation and delivery of nutrients during food digestion. Progress in the development of stable double
emulsions for food use is dependent on replacing small-molecule emulsifiers and synthetic polymeric stabilizing agents by
food-grade ingredients. Of particular value for conferring the required functionality are food proteins and polysaccharides.
This review describes how these biopolymers have been successfully incorporated into the internal and external aqueous phases
of W/O/W emulsions to improve the stability and yield of model systems. Recent advances in the use of protein–polysaccharide
conjugates and complexes for the stabilization of the outer droplets of W/O/W emulsions are highlighted. 相似文献
13.
To investigate the encapsulation of Print 3G, a peptidic agent that could reduce the angiogenic development of breast tumors,
pegylated liposomes used as intravenous vectors were studied and characterized. Recently, the path of liposomes has been explored
with success to improve the pharmacological properties of peptidic drugs and to stabilize them. In this study, loaded unilamellar
vesicles composed of SPC:CHOL:mPEG2000-DSPE (47:47:6) were prepared by the hydration of lipid film technique. An HPLC method
was developed and validated for the determination of Print 3G to calculate its encapsulation efficiency. Observed Print 3G
adsorption on different materials employed during liposome preparation (such as glass beads, tubing, and connections for extrusion)
led to the modification of the manufacturing method. The freeze-thawing technique was used to enhance the amount of Print
3G encapsulated into blank liposomes prepared using the hydration of lipid film procedure. Many factors may influence peptide
entrapment, namely the number of freeze-thawing cycles, the lipid concentration, the peptide concentration, and the mixing
time. Consequently, a design of experiments was performed to obtain the best encapsulation efficiency while minimizing the
number of experiments. The lipid concentration and the number of freeze-thawing cycles were identified as the positive factors
influencing the encapsulation. As a result of the optimization, an optimum was found and encapsulation efficiencies were improved
from around 30% to 63%. Liposome integrity was evaluated by photon correlation spectroscopy and freeze-fracture electron microscopy
to ensure that the selected formulation possesses the required properties to be a potential candidate for further in vitro and in vivo experiments. 相似文献
14.
Summary A new method is described for producing liposomes suitable for food related applications. Liposomes are obtained by dispersing phospholipids in an aqueous phase under high shear forces. A model was developed to select lipid and protein concentrations in order to obtain a relatively high efficiency of encapsulation. 相似文献
15.
Liposomes can been used as potential immunoadjuvants, because they have the ability to elicit both a cellular mediated immune response and a humoral immune response. Studies have shown liposomes to be effective immunopotentiators in hepatitis A and influenza vaccines. For all these purposes, liposomes can be prepared by different methods. After disperging suitable membrane lipids in an aqueous phase and spontaneous formation of multilamellar large vesicles (MLV), mechanical procedures such as ultrasonication, homogenization by a French press or by other high pressure devices and, or extrusion through polycarbonate membranes with defined pore sizes lead to a reduction in size and number of lamellae of the vesicles. A second group of preparation procedures uses suitable detergents, e.g., bile salts or alkylglycosides. A third group of procedures starts with dissolving the lipids in an organic solvent and mixing it with an aqueous phase. The concentration of the organic solvent is then reduced by suitable procedures. Here we present a new technique for the preparation of liposomes with associated membrane proteins, where lipid vesicles are formed immediately after injection into a micellar protein solution. The model membrane protein used for these studies is a truncated recombinant gp41 produced in E. coli. This viral membrane antigen is a possible candidate protein for the establishment of HIV-vaccines. The data presented here, show an efficient and reproducible one step membrane protein encapsulation procedure into liposomes in a closed and sterile containment. We examined encapsulation efficiency, membrane protein conformation and immunogenicity of this possible liposomal vaccine candidate, which can be produced in GMP-compliant quality with the described technique. 相似文献
16.
The entrapment of plasmid DNA (pMB9) and high molecular weight DNA into large unilamellar liposomes is described. The entrapment of DNA is specific and due to encapsulation of DNA into the aqueous compartment of liposomes. The entrapped Dna, resistant to deoxyribonuclease treatment, could be reisolated from liposomes intact and, as has been shown by transformation assay, it remains biologically active. The advantages of our method and possible applications are discussed. 相似文献
17.
Encapsulation of drugs into multivesicular liposomes (DepoFoam) offers a novel approach to sustained-release drug delivery. While encapsulation of drugs into unilamellar and multilamellar liposomes, and complexation of drugs with lipids, resulted in products with better performance over a period lasting several hours to a few days after intravascular administration, DepoFoam-encapsulation has been shown to result in sustained-release lasting over several days to weeks after non-vascular administration. The routes of administration most viable for delivery of drugs via DepoFoam formulations include intrathecal, epidural, subcutaneous, intramuscular, intra-atricular, and intraocular. DepoFoam particles are distinguished structurally from unilamellar vesicles, multilamellar vesicles, and neosomes in that each particle comprises a set of closely packed non-concentric vesicles. The particles are tens of microns in diameter and have large trapped volume, thereby affording delivery of large quantities of drugs in the encapsulated form in a small volume of injection. A number of methods based on a manipulation of the lipid and aqueous composition can be used to control the rate of sustained-release from a few days to several weeks. 相似文献
18.
Fat emulsions containing soy triacylglycerols (100-300 g/l) and egg-yolk phospholipids (12 g/l) are often used for intravenous feeding. Previous studies have shown that these emulsions contain chylomicron-like emulsion particles of diameters of 300-400 nm and excess phospholipids aggregated as vesicles (liposomes), which remain in the infranatant upon floatation of the emulsion particles by ultracentrifugation. This work is devoted to the characterization of the commercial lipid emulsions commonly denoted Intralipids, with special emphasis on the presently ill-defined liposomes. The lipid particles composing commercial lipid emulsions (10%, 20% and 30% Intralipids, Kabivitrum Nutrition) were characterized by the combined use of physical and chemical methods. Each of the emulsions was fractionated by ultracentrifugation in saline into a 'cream' layer which floats to the top of the dispersion upon ultracentrifugation and a relatively transparent infranatant. The cream layer contains large emulsion particles of diameters ranging from 300 to 400 nm, in agreement with theoretical considerations based on their chemical composition as determined by chemical analysis. The infranatants contain about 1 g/l triacylglycerols in addition to phospholipids (from 7.2 g/l in 10% Intralipid to 2.4 g/l in 30% Intralipid) in the form of smaller particles of 70-100 nm diameter. Cryo-transmission electron microscopy shows that the infranatants contain vesicles (mostly unilamellar) at the side of residual small emulsion particles. This conclusion is also consistent with the distribution of phospholipids between outer and inner lamellae, as determined by 31P-NMR. 相似文献
19.
AbstractThe characterization of two liposomal formulations of boronated DNA-interacting agents has been performed. It is shown that the two boronated drugs, WSA-Water Soluble Acridine and WSP-Water Soluble Phenantridine, can be encapsulated within unilamellar sterically stabilized liposomes with high drug-to-lipid ratios (up to 0.50:1 (mol:mol)), using transmembrane pH gradients. The steric stabilization of the liposomes was accomplished by the addition of DSPE-PEG(2000) (PEG-lipid) to DSPC/Cho lipid mixtures and the composition used was DSPC: Cho: DSPE-PEG 55:40:5 (moI%). The loading of the drugs resulted in drug precipitation in the liposomal aqueous core as observed by cryo-transmission electron microscopy (c-TEM). Moreover, it is shown that when pH gradients across the bilayer were used for remote loading of WSP or when ammonium sulfate gradients were used for remote loading of WSA, the formation of small bilayer fragments (discs) was induced. We present compelling evidence that the formation of discs is a consequence of precipitate growth in the liposomal interior. The precipitate growth causes some of the liposomes to rupture resulting in the above mentioned disc-formation and a substantial decrease in trapping efficiency. The in vitro stability of the drug loaded liposomes was excellent, both in buffer and in 25% human serum. For most of the formulations, the release of the drugs was below or around 10% after 24 hours at 37 oC. Furthermore, the influence of initial internal pH and internal buffering capacity on release properties of WSA and WSP were investigated. It is shown that the release profiles of the drugs can be controlled, to a large extent, by varying the composition of the internal liposomal aqueous phase. 相似文献
20.
Purpose: The intent of this work was to assess the impact of lyophilization on the encapsulation of salmon calcitonin (sCT) into liposomes. Methods: Four different liposomal formulations were investigated, i.e. DPPC:Chol:DSPE-PEG2000 (75:20:5 and 65:30:5) and DPPC:Chol (80:20 and 66.7:33.3). Lipid films were prepared and hydrated with loading buffer containing sCT and different concentrations of the cryoprotectant, trehalose dihydrate. The liposomes were lyophilized, reconstituted and extruded to obtain small unilamellar vesicles. Non-encapsulated sCT was separated by gel filtration. Non-lyophilized formulations and liposomes lyophilized without the cryoprotectant were used as controls. Liposomes were analyzed for particle size, polydispersity index, zeta-potential and encapsulation efficiency. 31P-NMR (phosphorous nuclear magnetic resonance spectroscopy) was performed on selected formulations. Results: Post-lyophilization, no significant change in particle sizes and zeta-potentials were noted, regardless of the presence or absence of the cryoprotectant. Encapsulation efficiencies, however, increased following lyophilization, in both PEGylated (lyophilization control batch) and non-PEGylated liposomes (cryoprotectant batches only). 31P-NMR revealed the presence of two distinct vesicle populations – liposomes and micelles – in PEGylated formulation. The presence of micelles might be responsible for the observed encapsulation enhancement of sCT in the PEGylated formulation. Conclusions: Lyophilization resulted in an increase in encapsulation efficiency of sCT in PEGylated liposomes, even in the absence of a cryoprotectant, due to presence of micellar vesicles. 相似文献
|