Characterization and in vitro evaluation of spherulites as sequestering vesicles with potential application in drug detoxification

The aim of the present investigation was to prepare and characterize lecithin spherulites as parenteral drug sequestering agents with potential application in the treatment of drug overdose and chemical poisoning. The spherulites (approximately 200 nm) obtained by controlled hydration and shearing of lipid-alcohol mixtures, revealed unexpected differences in the physical properties of the bilayer when compared to liposomes. Differential scanning calorimetry, 31-phosphorus nuclear magnetic resonance, and pH-sensitive pyranine steady-state fluorescence studies indicated that although spherulites retained the typical bilayer conformation, the arrangement of the phospholipid molecules was perturbed relative to native liposome bilayer. The loosened packing of the phospholipids in bilayers was strongly supported by the relative ease with which spherulites lost the established pH-gradient. This permeability problem was overcome via incorporation of cholesterol in the bilayer. Subsequently, albumin/buffer components were encapsulated in these spherulites and the drug sequestration potential for detoxification application was examined. Citrate pH-gradient spherulites accumulated 75% of external haloperidol while those loaded with approximately 20% (w/w) albumin were able to take up 45% of haloperidol and 91-95% of taxanes (docetaxel and paclitaxel). In cytotoxicity studies, the competitive internalization of docetaxel by albumin-loaded spherulites resulted in an increase of the IC50 value for the free drug. Thus, the spherulite technology could be a versatile approach for actively sequestering toxins in the blood and for reducing the adverse effects by altering the pharmacokinetics and biodistribution of overdosed drugs.     

A simple and sensitive HPLC fluorescence method for determination of tadalafil in mouse plasma

A simple and sensitive high-performance liquid chromatographic (HPLC) method utilizing fluorescence detection was developed for the determination of the phosphodiesterase type 5 inhibitor tadalafil in mouse plasma. This method utilizes a simple sample preparation (protein precipitation) with high recovery of tadalafil (∼98%), which eliminates the need for an internal standard. For constituent separation, the method utilized a monolithic C₁₈ column and a flow rate of 1.0 mL/min with a mobile phase gradient consisting of aqueous trifluoroacetic acid (0.1% TFA in deionized water pH 2.2, v/v) and acetonitrile. The method calibration was linear for tadalafil in mouse plasma from 100 to 2000 ng/mL (r > 0.999) with a detection limit of approximately 40 ng/mL. Component fluorescence detection was achieved using an excitation wavelength of 275 nm with monitoring of the emission wavelength at 335 nm. The intra-day and inter-day precision (relative standard deviation, RSD) values for tadalafil in mouse plasma were less than 14%, and the accuracy (percent error) was within −14% of the nominal concentration. The method was utilized on mouse plasma samples from research evaluating the potential cardioprotective effects of tadalafil on mouse heart tissue exposed to doxorubicin, a chemotherapeutic drug with reported cardiotoxic effects.     

Asymmetric structural features in single supported lipid bilayers containing cholesterol and GM1 resolved with synchrotron X-Ray reflectivity

The cell membrane comprises numerous protein and lipid molecules capable of asymmetric organization between leaflets and liquid-liquid phase separation. We use single supported lipid bilayers (SLBs) to model cell membranes, and study how cholesterol and asymmetrically oriented ganglioside receptor G_M1 affect membrane structure using synchrotron x-ray reflectivity. Using mixtures of cholesterol, sphingomyelin, and 1,2-dioleoyl-sn-glycero-3-phosphocholine, we characterize the structure of liquid-ordered and liquid-disordered SLBs in terms of acyl-chain density, headgroup size, and leaflet thickness. SLBs modeling the liquid-ordered phase are 10 Å thicker and have a higher acyl-chain electron density (〈ρ_chain〉 = 0.33 e⁻/ų) compared to SLBs modeling the liquid-disordered phase, or pure phosphatidylcholine SLBs (〈ρ_chain〉 = 0.28 e⁻/ų). Incorporating G_M1 into the distal bilayer leaflet results in membrane asymmetry and thickening of the leaflet of 4-9 Å. The structural effect of G_M1 is more complex in SLBs of cholesterol/sphingomyelin/1,2-dioleoyl-sn-glycero-3-phosphocholine, where the distal chains show a high electron density (〈ρ_chain〉 = 0.33 e⁻/ų) and the lipid diffusion constant is reduced by ∼50%, as measured by fluorescence microscopy. These results give quantitative information about the leaflet asymmetry and electron density changes induced by receptor molecules that penetrate a single lipid bilayer.     

Effect of local anesthetic lidocaine on electrostatic properties of a lipid bilayer

The influence of the local anesthetic lidocaine on electrostatic properties of a lipid membrane bilayer was studied by molecular dynamics simulations. The electrostatic dipole potential, charge densities, and orientations of the headgroup angle have been examined in the presence of different amounts of charged or uncharged forms of lidocaine. Important changes in the membrane properties caused by the presence of both forms of lidocaine are presented and discussed. Our simulations have shown that both charged and uncharged lidocaine cause almost the same increase in the electrostatic potential in the middle of the membrane, although for different reasons. The increase, ∼90 mV for 9 mol % of lidocaine and 220 mV for 28 mol % of lidocaine, is of a size that may affect the functioning of voltage-gated ion channels.     

Productive hemifusion intermediates in fast vesicle fusion driven by neuronal SNAREs

An in vitro fusion assay uses fluorescence microscopy of labeled lipids to monitor single v-SNARE vesicle docking and fusion events on a planar lipid bilayer containing t-SNAREs. For vesicles and bilayer comprising phosphatidylcholine (POPC, 84-85% by mol) and phosphatidylserine (DOPS, 15% by mol), previous work demonstrated prompt, full fusion (τ_fus = 25 ms). Substitution of 20-60% phosphatidylethanolamine (DOPE) for phosphatidylcholine in the v-SNARE vesicle with either 0 or 20% DOPE included in the t-SNARE bilayer gives rise to hemifusion events. Labeled lipids diffuse into the planar bilayer as two temporally distinct waves, presumably hemifusion of the outer leaflet followed by inner leaflet (core) fusion. The fusion kinetics with DOPE is markedly heterogeneous. Some vesicle/docking site pairs exhibit prompt, full fusion while others exhibit hemifusion. Hemifusion events are roughly half productive (leading to subsequent core fusion within 20 s) and half dead-end. In qualitative accord with expectations from studies of protein-free vesicle-vesicle fusion, the hemifusion rate k_hemi is 15-20 times faster than the core fusion rate k_core, and the fraction of hemifusion events increases with increasing percentage of DOPE. This suggests similar underlying molecular pathways for protein-free and neuronal SNARE-driven fusion. Removal of phosphatidylserine from the v-SNARE vesicle has no effect on docking or fusion.     

The Enterobacter aerogenes outer membrane efflux proteins TolC and EefC have different channel properties

The outer membrane proteins TolC and EefC from Enterobacter aerogenes are involved in multidrug resistance as part of two resistance-nodulation-division efflux systems. To gain more understanding in the molecular mechanism underlying drug efflux, we have undertaken an electrophysiological characterization of the channel properties of these two proteins. TolC and EefC were purified in their native trimeric form and then reconstituted in proteoliposomes for patch-clamp experiments and in planar lipid bilayers. Both proteins generated a small single channel conductance of about 80 pS in 0.5 M KCl, indicating a common gated structure. The resultant pores were stable, and no voltage-dependent openings or closures were observed. EefC has a low ionic selectivity (P_K/P_Cl = ∼ 3), whereas TolC is more selective to cations (P_K/P_Cl = ∼ 30). This may provide a possible explanation for the difference in drug selectivity between the AcrAB-TolC and EefABC efflux systems observed in vivo. The pore-forming activity of both TolC and EefC was severely inhibited by divalent cations entering from the extracellular side. Another characteristic of the TolC and EefC channels was the systematic closure induced by acidic pH. These results are discussed in respect to the physiological functions and structural models of TolC and EefC.     

Bilayer Asymmetry Influences Integrin Sequestering in Raft-Mimicking Lipid Mixtures

There is growing recognition that lipid heterogeneities in cellular membranes play an important role in the distribution and functionality of membrane proteins. However, the detection and characterization of such heterogeneities at the cellular level remains challenging. Here we report on the poorly understood relationship between lipid bilayer asymmetry and membrane protein sequestering in raft-mimicking model membrane mixtures using a powerful experimental platform comprised of confocal spectroscopy XY-scan and photon-counting histogram analyses. This experimental approach is utilized to probe the domain-specific sequestering and oligomerization state of α_vβ₃ and α₅β₁ integrins in bilayers, which contain coexisting liquid-disordered/liquid-ordered (l_d/l_o) phase regions exclusively in the top leaflet of the bilayer (bottom leaflet contains l_d phase). Comparison with previously reported integrin sequestering data in bilayer-spanning l_o-l_d phase separations demonstrates that bilayer asymmetry has a profound influence on α_vβ₃ and α₅β₁ sequestering behavior. For example, both integrins sequester preferentially to the l_o phase in asymmetric bilayers, but to the l_d phase in their symmetric counterparts. Furthermore, our data show that bilayer asymmetry significantly influences the role of native ligands in integrin sequestering.     

Coal fly ash and lime addition enhances the rate and efficiency of decomposition of food waste during composting

To evaluate the use of coal fly ash (CFA) on the decomposition efficiency of food waste, synthetic food waste was mixed with lime at 1.5% and 3% (equivalent to 0.94% and 1.88% CaCO₃, respectively), CFA at 5%, 10% and 15% with lime so as to achieve CaCO₃ equivalent of 1.88% and composted for 42 days in a thermophilic 20 l composter with two replicates each. Alkaline materials at 1.88% CaCO₃ equivalent successfully buffered the pH during the composting and enhanced the decomposition efficiency. When these buffering was achieved with CFA + lime, the composting period could be shortened to ∼28 days compared with ∼42 days in 3% lime. Organic decomposition in terms of CO₂ loss, carbon turnover and nitrogen transformation were significantly higher for treatments with 1.88% CaCO₃ equivalent. Nutrient transformations and compost maturity parameters indicated that addition of CFA (5–10%) with lime at 1.88% CaCO₃ equivalent enhances the decomposition efficiency and shortens the composting period by 35%.     

Bilayer structural destabilization by low amounts of chlorophyll a

The present study shows that small admixtures of one chlorophyll a (Chla) molecule per several hundred lipid molecules have strong destabilizing effect on lipid bilayers. This effect is clearly displayed in the properties of the L_α-H_II transformations and results from a Chla preference for the H_II relative to the L_α phase. Chla disfavors the lamellar liquid crystalline phase L_α and induces its replacement with inverted hexagonal phase H_II, as is consistently demonstrated by DSC and X-ray diffraction measurements on phosphatidylethanolamine (PE) dispersions. Chla lowers the L_α-H_II transition temperature (42 °C) of the fully hydrated dipalmitoleoyl PE (DPoPE) by ∼ 8 °C and ∼ 17 °C at Chla/DPoPE molar ratios of 1:500 and 1:100, respectively. Similar Chla effect was recorded also for dielaidoyl PE dispersions. The lowering of the transition temperature and the accompanying significant loss of transition cooperativity reflect the Chla repartitioning and preference for the H_II phase. The reduction of the H_II phase lattice constant in the presence of Chla is an indication that Chla favors H_II phase formation by decreasing the radius of spontaneous monolayer curvature, and not by filling up the interstitial spaces between the H_II phase cylinders. The observed Chla preference for H_II phase and the substantial bilayer destabilization in the vicinity of a bilayer-to-nonbilayer phase transformation caused by low Chla concentrations can be of interest as a potential regulatory or membrane-damaging factor.     

The S1 split signal of photosystem II; a tyrosine-manganese coupled interaction

Detailed optical and EPR analyses of states induced in dark-adapted PS II membranes by cryogenic illumination permit characterization and quantification of all pigment derived donors and acceptors, as well as optically silent (in the visible, near infrared) species which are EPR active. Near complete turnover formation of Q_A⁻ is seen in all centers, but with variable efficiency, depending on the donor species. In minimally detergent-exposed PS II membranes, negligible (< 5%) oxidation of chlorophyll or carotenoid centers occurs for illumination temperatures 5-20 K. An optically silent electron donor to P680⁺ is observed with the same decay kinetics as the S₁ split signal. Cryogenic donors to P680⁺ seen are: (i) transient (t_1/2 ∼ 150 s) tyrosine related species, including ‘split signals’ (∼ 15% total centers), (ii) reduced cytochrome b₅₅₉ (∼ 30-50% centers), and (iii) an organic donor, possibly an amino acid side chain, (∼ 30% centers).     

The effect of biomass moisture content on bioethanol yields from steam pretreated switchgrass and sugarcane bagasse

This study aimed to determine the effect of moisture content of three different feedstocks on overall ethanol yield. Switchgrass and sugarcane bagasse from two sources were either soaked in water (∼80% moisture) or left dry (∼12% moisture), and half each of these were impregnated with 3% w/w SO₂ and all were steam pretreated. The twelve resulting substrates were compared based on overall sugar recovery after pretreatment, cellulose conversion following enzymatic hydrolysis, and ethanol yield following simultaneous saccharification and fermentation. The overall ethanol yield after simultaneous saccharification and fermentation of hexoses was 18-28% higher in samples that were soaked prior to SO₂ addition than in SO₂-catalyzed samples that were not soaked. In samples that were uncatalyzed, soaking made little difference, indicating that the positive effect of increased moisture content may be related to increased permeability of the biomass to SO₂.     

CRAC motif peptide of the HIV-1 gp41 protein thins SOPC membranes and interacts with cholesterol

This study uses low-angle (LAXS) and wide-angle (WAXS) X-ray synchrotron scattering, volume measurements and thin layer chromatography to determine the structure and interactions of SOPC, SOPC/cholesterol mixtures, SOPC/peptide and SOPC/cholesterol/peptide mixtures. N-acetyl-LWYIK-amide (LWYIK) represents the naturally-occurring CRAC motif segment in the pretransmembrane region of the gp41 protein of HIV-1, and N-acetyl-IWYIK-amide (IWYIK), an unnatural isomer, is used as a control. Both peptides thin the SOPC bilayer by ∼ 3 Å, and cause the area/unit cell (peptide + SOPC) to increase by ∼ 9 Å² from the area/lipid of SOPC at 30 °C (67.0 ± 0.9 Å²). Model fitting suggests that LWYIK's average position is slightly closer to the bilayer center than IWYIK's, and both peptides are just inside of the phosphate headgroup. Both peptides increase the wide-angle spacing d of SOPC without cholesterol, whereas with 50% cholesterol LWYIK increases d but IWYIK decreases d. TLC shows that LWYIK is more hydrophobic than IWYIK; this difference persists in peptide/SOPC 1:9 mole ratio mixtures. Both peptides counteract the chain ordering effect of cholesterol to roughly the same degree, and both decrease K_C, the bending modulus, thus increasing the SOPC membrane fluidity. Both peptides nucleate crystals of cholesterol, but the LWYIK-induced crystals are weaker and dissolve more easily.     

Alamethicin in lipid bilayers: Combined use of X-ray scattering and MD simulations

We study fully hydrated bilayers of two di-monounsaturated phospholipids diC18:1PC (DOPC) and diC22:1PC with varying amounts of alamethicin (Alm). We combine the use of X-ray diffuse scattering and molecular dynamics simulations to determine the orientation of alamethicin in model lipids. Comparison of the experimental and simulated form factors shows that Alm helices are inserted transmembrane at high humidity and high concentrations, in agreement with earlier results. The X-ray scattering data and the MD simulations agree that membrane thickness changes very little up to 1/10 Alm/DOPC. In contrast, the X-ray data indicate that the thicker diC22:1PC membrane thins with added Alm, a total decrease in thickness of 4 Å at 1/10 Alm/diC22:1PC. The different effect of Alm on the thickness changes of the two bilayers is consistent with Alm having a hydrophobic thickness close to the hydrophobic thickness of 27 Å for DOPC; Alm is then mismatched with the 7 Å thicker diC22:1PC bilayer. The X-ray data indicate that Alm decreases the bending modulus (K_C) by a factor of ∼ 2 in DOPC and a factor of ∼ 10 in diC22:1PC membranes (P/L ∼ 1/10). The van der Waals and fluctuational interactions between bilayers are also evaluated through determination of the anisotropic B compressibility modulus.     

Temperature-sensitive paramagnetic liposomes for image-guided drug delivery: Mn versus [Gd(HPDO3A)(H2O)]

Temperature-sensitive liposomes (TSLs) loaded with doxorubicin (Dox), and Magnetic Resonance Imaging contrast agents (CAs), either manganese (Mn^2 +) or [Gd(HPDO3A)(H₂O)], provide the advantage of drug delivery under MR image guidance. Encapsulated MRI CAs have low longitudinal relaxivity (r₁) due to limited transmembrane water exchange. Upon triggered release at hyperthermic temperature, the r₁ will increase and hence, provides a means to monitor drug distribution in situ. Here, the effects of encapsulated CAs on the phospholipid bilayer and the resulting change in r₁ were investigated using MR titration studies and ¹H Nuclear Magnetic Relaxation Dispersion (NMRD) profiles. Our results show that Mn^2 + interacted with the phospholipid bilayer of TSLs and consequently, reduced doxorubicin retention capability at 37 °C within the interior of the liposomes over time. Despite that, Mn^2 +-phospholipid interaction resulted in higher r₁ increase, from 5.1 ± 1.3 mM^− 1 s^− 1 before heating to 32.2 ± 3 mM^− 1 s^− 1 after heating at 60 MHz and 37 °C as compared to TSL(Gd,Dox) where the longitudinal relaxivities before and after heating were 1.2 ± 0.3 mM^− 1 s^− 1 and 4.4 ± 0.3 mM^− 1 s^− 1, respectively. Upon heating, Dox was released from TSL(Mn,Dox) and complexation of Mn^2 + to Dox resulted in a similar Mn^2 + release profile. From 25 to 38 °C, r₁ of [Gd(HPDO3A)(H₂O)] gradually increased due to increase transmembrane water exchange, while no Dox release was observed. From 38 °C, the release of [Gd(HPDO3A)(H₂O)] and Dox was irreversible and the release profiles coincided. By understanding the non-covalent interactions between the MRI CAs and phospholipid bilayer, the properties of the paramagnetic TSLs can be tailored for MR guided drug delivery.     

Preliminary investigation on the production of fuels and bio-char from Chlamydomonas reinhardtii biomass residue after bio-hydrogen production

The aim of this work was to investigate the potential conversion of Chlamydomonas reinhardtii biomass harvested after hydrogen production. The spent algal biomass was converted into nitrogen-rich bio-char, biodiesel and pyrolysis oil (bio-oil). The yield of lipids (algal oil), obtained by solvent extraction, was 15 ± 2% w/w_dry-biomass. This oil was converted into biodiesel with a 8.7 ± 1% w/w_dry-biomass yield. The extraction residue was pyrolysed in a fixed bed reactor at 350 °C obtaining bio-char as the principal fraction (44 ± 1% w/w_dry-biomass) and 28 ± 2% w/w_dry-biomass of bio-oil. Pyrolysis fractions were characterized by elemental analysis, while the chemical composition of bio-oil was fully characterized by GC-MS, using various derivatization techniques. Energy outputs resulting from this approach were distributed in hydrogen (40%), biodiesel (12%) and pyrolysis fractions (48%), whereas bio-char was the largest fraction in terms of mass.     

A method to determine dielectric constants in nonhomogeneous systems: application to biological membranes

Continuum electrostatic models have had quantitative success in describing electrostatic-mediated phenomena on atomistic scales; however, there continues to be significant disagreement about how to assign dielectric constants in mixed, nonhomogeneous systems. We introduce a method for determining a position-dependent dielectric profile from molecular dynamics simulations. In this method, the free energy of introducing a test charge is computed two ways: from a free energy perturbation calculation and from a numerical solution to Poisson's Equation. The dielectric profile of the system is then determined by minimizing the discrepancy between these two calculations simultaneously for multiple positions of the test charge. We apply this method to determine the dielectric profile of a lipid bilayer surrounded by water. We find good agreement with dielectric models for lipid bilayers obtained by other approaches. The free energy of transferring an ion from bulk water to the lipid bilayer computed from the atomistic simulations indicates that large errors are introduced when the bilayer is represented as a single slab of low dielectric embedded in the higher-dielectric solvent. Significant improvement results from introducing an additional layer of intermediate dielectric (∼3) on each side of the low dielectric core extending from ∼12 Å to 18 Å. A small dip in transfer free energy just outside the lipid headgroups indicates the presence of a very high dielectric. These results have implications for the design of implicit membrane models and our understanding of protein-membrane interactions.     

Characterization of Tightly Associated Smooth Muscle Myosin-Myosin Light-Chain Kinase-Calmodulin Complexes

A current popular model to explain phosphorylation of smooth muscle myosin (SMM) by myosin light-chain kinase (MLCK) proposes that MLCK is bound tightly to actin but weakly to SMM. We found that MLCK and calmodulin (CaM) co-purify with unphosphorylated SMM from chicken gizzard, suggesting that they are tightly bound. Although the MLCK:SMM molar ratio in SMM preparations was well below stoichiometric (1:73 ± 9), the ratio was ∼ 23-37% of that in gizzard tissue. Fifteen to 30% of MLCK was associated with CaM at ∼ 1 nM free [Ca²⁺]. There were two MLCK pools that bound unphosphorylated SMM with K_d ∼ 10 and 0.2 μM and phosphorylated SMM with K_d ∼ 20 and 0.2 μM. Using an in vitro motility assay to measure actin sliding velocities, we showed that the co-purifying MLCK-CaM was activated by Ca²⁺ and phosphorylation of SMM occurred at a pCa₅₀ of 6.1 and at a Hill coefficient of 0.9. Similar properties were observed from reconstituted MLCK-CaM-SMM. Using motility assays, co-sedimentation assays, and on-coverslip enzyme-linked immunosorbent assays to quantify proteins on the motility assay coverslip, we provide strong evidence that most of the MLCK is bound directly to SMM through the telokin domain and some may also be bound to both SMM and to co-purifying actin through the N-terminal actin-binding domain. These results suggest that this MLCK may play a role in the initiation of contraction.     

Bilayer heterojunction solar cell based on naphthalene bis-benzimidazole

We have fabricated a bilayer heterojunction solar cell consisting of p-n active layers of naphthalenetetracarboxylic bis-benzimidazole, N-CON, and zinc phthalocyanine, ZnPc. Conjugated naphthalene derivative of naphthalene bis-benzimidazole was employed as an electron acceptor. Bilayer solar cells were produced by successive evaporation of zinc phthalocyanine, ZnPc, and naphthalene bis-benzimidazole, N-CON, on glass substrates coated with indium doped tin oxide, ITO/PEDOT:PSS/ZnPc/N-CON/Al. Photovoltaic characteristics of bilayer cell were measured under simulated AM 1.5 sun illumination (V_oc = 0.50 V, J_sc = 2.11 mA/cm², FF = 0.51, η = 0.54%). Efficiency of the cell was discussed in relation to energy gap and work functions of the thin layers.     

Preparation of (1 → 3)-β-d-glucan oligosaccharides by hydrolysis of curdlan with commercial α-amylase

Water soluble (1 → 3)-β-d-glucan oligosaccharides were prepared by hydrolyzing curdlan with α-amylase. The hydrolysis process was monitored by the DE values of the hydrolysates. Under the optimized conditions (pH, 5.98; temperature, 55.92 °C; α-amylase amount, 31.94 mg α-amylase/500 mL of reaction mixture containing 5 g curdlan; reaction time, 30 min), maximum DE value (15.62%) was obtained. The resulting products were composed of (1 → 3)-β-d-glucan oligosaccharides of DP 2-9. The hydrolysates were filtered, concentrated to ∼20% (w/v), and precipitated with 5 volumes of ethanol, which were then freeze dried to yield a water soluble powder. The (1 → 3)-β-d-glucan oligosaccharides content of the product and the yield were 97.7% and 97.6% (w/w), respectively.