Synthesis of Non-uniformly Pr-doped SrTiO3 Ceramics and Their Thermoelectric Properties

We demonstrate a novel synthesis strategy for the preparation of Pr-doped SrTiO₃ ceramics via a combination of solid state reaction and spark plasma sintering techniques. Polycrystalline ceramics possessing a unique morphology can be achieved by optimizing the process parameters, particularly spark plasma sintering heating rate. The phase and morphology of the synthesized ceramics were investigated in detail using X-ray diffraction, scanning electron microcopy and energy-dispersive X-ray spectroscopy. It was observed that the grains of these bulk Pr-doped SrTiO₃ ceramics were enhanced with Pr-rich grain boundaries. Electronic and thermal transport properties were also investigated as a function of temperature and doping concentration. Such a microstructure was found to give rise to improved thermoelectric properties. Specifically, it resulted in a significant improvement in carrier mobility and the thermoelectric power factor. Simultaneously, it also led to a marked reduction in the thermal conductivity. As a result, a significant improvement (> 30%) in the thermoelectric figure of merit was achieved for the whole temperature range over all previously reported maximum values for SrTiO₃-based ceramics. This synthesis demonstrates the steps for the preparation of bulk polycrystalline ceramics of non-uniformly Pr-doped SrTiO₃.     

The intrinsic resolution limit in the atomic force microscope: implications for heights of nano-scale features

Background

Accurate mechanical characterization by the atomic force microscope at the highest spatial resolution requires that topography is deconvoluted from indentation. The measured height of nanoscale features in the atomic force microscope (AFM) is almost always smaller than the true value, which is often explained away as sample deformation, the formation of salt deposits and/or dehydration. We show that the real height of nano-objects cannot be obtained directly: a result arising as a consequence of the local probe-sample geometry.

Methods and Findings

We have modeled the tip-surface-sample interaction as the sum of the interaction between the tip and the surface and the tip and the sample. We find that the dynamics of the AFM cannot differentiate between differences in force resulting from 1) the chemical and/or mechanical characteristics of the surface or 2) a step in topography due to the size of the sample; once the size of a feature becomes smaller than the effective area of interaction between the AFM tip and sample, the measured height is compromised. This general result is a major contributor to loss of height and can amount to up to ∼90% for nanoscale features. In particular, these very large values in height loss may occur even when there is no sample deformation, and, more generally, height loss does not correlate with sample deformation. DNA and IgG antibodies have been used as model samples where experimental height measurements are shown to closely match the predicted phenomena.

Conclusions

Being able to measure the true height of single nanoscale features is paramount in many nanotechnology applications since phenomena and properties in the nanoscale critically depend on dimensions. Our approach allows accurate predictions for the true height of nanoscale objects and will lead to reliable mechanical characterization at the highest spatial resolution.     

Molecular dynamics simulation of the Al2O3 film structure during atomic layer deposition

Based on an understanding of atomic layer deposition (ALD) from prior experimental and computational results, all-atom molecular dynamics (MD) simulations are used to model the Al₂O₃ film structure and composition during ALD processing. By separating the large time-scale surface reactions from the small time-scale structural relaxation, we have focused on the growth dynamics of amorphous Al₂O₃ films at the atomic scale. The simulations are able to reproduce some important properties and growth mechanisms of Al₂O₃ ALD films, and hence provide a bridge between atomic-level information and experimental measurements. Information about the evolution of the microscopic structures of the Al₂O₃ films is generated, and the influence of operation parameters on the Al₂O₃ ALD process. The simulations predict a strong influence of the initial surface composition and process temperature on the surface roughness, growth rate and growth mode of the deposited films.     

First-principles study of Rashba effect in the (LaAlO3)2/(SrTiO3)2

We have performed first-principles density functional calculations for superlattice composed of two oxide insulators, (LaAlO₃)₂/(SrTiO₃)₂. Calculated band structures show interface-induced metallic states. We found electron doping in the TiO₂ layer at LaO interface and hole doping in the AlO₂ layer at SrO interface. Due to the built-in electric field at the interface, the interface states show spin splitting and vortex-like spin textures in momentum space, i.e. Rashba effect. Calculated Rashba coefficient α_R, 12.6 meV Å, is of the same order as that of the experimental value.     

Thermodynamic and kinetic characterisation of individual haems in multicentre cytochromes c3

The characterisation of individual centres in multihaem proteins is difficult due to the similarities in the redox and spectroscopic properties of the centres. NMR has been used successfully to distinguish redox centres and allow the determination of the microscopic thermodynamic parameters in several multihaem cytochromes c₃ isolated from different sulphate-reducing bacteria. In this article we show that it is also possible to discriminate the kinetic properties of individual centres in multihaem proteins, if the complete microscopic thermodynamic characterisation is available and the system displays fast intramolecular equilibration in the time scale of the kinetic experiment. The deconvolution of the kinetic traces using a model of thermodynamic control provides a reference rate constant for each haem that does not depend on driving force and can be related to structural factors. The thermodynamic characterisation of three tetrahaem cytochromes and their kinetics of reduction by sodium dithionite are reported in this paper. Thermodynamic and kinetic data were fitted simultaneously to a model to obtain microscopic reduction potentials, haem-haem and haem-proton interacting potentials, and reference rate constants for the haems. The kinetic information obtained for these cytochromes and recently published data for other multihaem cytochromes is discussed with respect to the structural factors that determine the reference rates. The accessibility for the reducing agent seems to play an important role in controlling the kinetic rates, although is clearly not the only factor.     

Distribution of MT1 Melatonin Receptor Promoter-Driven RFP Expression in the Brains of BAC C3H/HeN Transgenic Mice

The pineal hormone melatonin activates two G-protein coupled receptors (MT₁ and MT₂) to regulate in part biological functions. The MT₁ and MT₂ melatonin receptors are heterogeneously distributed in the mammalian brain including humans. In the mouse, only a few reports have assessed the expression of the MT₁ melatonin receptor expression using 2-iodomelatonin binding, in situ hybridization and/or polymerase chain reaction (PCR). Here, we described a transgenic mouse in which red fluorescence protein (RFP) is expressed under the control of the endogenous MT₁ promoter, by inserting RFP cDNA at the start codon of MTNR1a gene within a bacterial artificial chromosome (BAC) and expressing this construct as a transgene. The expression of RFP in the brain of this mouse was examined either directly under a fluorescent microscope or immunohistochemically using an antibody against RFP (RFP-MT₁). RFP-MT₁ expression was observed in many brain regions including the subcommissural organ, parts of the ependyma lining the lateral and third ventricles, the aqueduct, the hippocampus, the cerebellum, the pars tuberalis, the habenula and the habenula commissure. This RFP-MT₁ transgenic model provides a unique tool for studying the distribution of the MT₁ receptor in the brain of mice, its cell-specific expression and its function in vivo.     

Two transmembrane Cys residues are involved in 5-HT4 receptor dimerization

The 5-HT₄ receptor (5-HT₄R) belongs to the G-protein-coupled receptor (GPCR) family and is of considerable interest for the development of new drugs to treat gastrointestinal diseases and memory disorders. The 5-HT₄R exists as a constitutive dimer but its molecular determinants are still unknown. Using co-immunoprecipitation and Bioluminescence Resonance Energy Transfer (BRET) techniques, we show here that 5-HT₄R homodimerization but not 5-HT₄R-β₂ adrenergic receptor (β₂AR) heterodimerization is largely decreased under reducing conditions suggesting the participation of disulfide bonds in 5-HT₄R dimerization. Molecular modeling and protein docking experiments identified four cysteine (Cys) residues potentially involved in the dimer interface through intramolecular or intermolecular disulfide bonds. We show that disulfide bridges between Cys112 and Cys145 located within TM3 and TM4, respectively, are of critical importance for 5-HT₄R dimer formation. Our data suggest that two disulfide bridges between two transmembrane Cys residues are involved in the dimerization interface of a GPCR.     

Comparative Study of Antibiofilm Activity of Copper Oxide and Iron Oxide Nanoparticles Against Multidrug Resistant Biofilm Forming Uropathogens

The effectiveness of the metal oxide nanoparticles viz. CuO and Fe₂O₃ as antibacterial agents against multidrug resistant biofilm forming bacteria was evaluated. CuO nanoparticles were also experimented for antibiofilm and time kill assay. The CuO displayed maximum antibacterial activity with zone of inhibition of (22 ± 1) mm against methicillin resistant Staphylococcus aureus (MRSA) followed by Escherichia coli (18 ± 1) mm. The Fe₂O₃ showed the zone of inhibition against MRSA of (14 ± 1) mm followed by E. coli (12 ± 1) mm. CuO proved to be more toxic than Fe₂O₃ nanoparticles showing significantly high antibacterial activity and found to possess dose dependent antibiofilm properties.     

Simultaneous measurement of plasma vitamin D(3) metabolites, including 4β,25-dihydroxyvitamin D(3), using liquid chromatography-tandem mass spectrometry

Simultaneous and accurate measurement of circulating vitamin D metabolites is critical to studies of the metabolic regulation of vitamin D and its impact on health and disease. To that end, we have developed a specific liquid chromatography–tandem mass spectrometry (LC–MS/MS) method that permits the quantification of major circulating vitamin D₃ metabolites in human plasma. Plasma samples were subjected to a protein precipitation, liquid–liquid extraction, and Diels–Alder derivatization procedure prior to LC–MS/MS analysis. Importantly, in all human plasma samples tested, we identified a significant dihydroxyvitamin D₃ peak that could potentially interfere with the determination of 1α,25-dihydroxyvitamin D₃ [1α,25(OH)₂D₃] concentrations. This interfering metabolite has been identified as 4β,25-dihydroxyvitamin D₃ [4β,25(OH)₂D₃] and was found at concentrations comparable to 1α,25(OH)₂D₃. Quantification of 1α,25(OH)₂D₃ in plasma required complete chromatographic separation of 1α,25(OH)₂D₃ from 4β,25(OH)₂D₃. An assay incorporating this feature was used to simultaneously determine the plasma concentrations of 25OHD₃, 24R,25(OH)₂D₃, 1α,25(OH)₂D₃, and 4β,25(OH)₂D₃ in healthy individuals. The LC–MS/MS method developed and described here could result in considerable improvement in quantifying 1α,25(OH)₂D₃ as well as monitoring the newly identified circulating metabolite, 4β,25(OH)₂D₃.     

Covalent labeling of nuclear vitamin D receptor with affinity labeling reagents containing a cross-linking probe at three different positions of the parent ligand: Structural and biochemical implications

Structure-functional characterization of vitamin D receptor (VDR) requires identification of structurally distinct areas of VDR-ligand-binding domain (VDR-LBD) important for biological properties of 1α,25-dihydroxyvitamin D₃ (1,25(OH)₂D₃). We hypothesized that covalent attachment of the ligand into VDR-LBD might alter ‘surface structure’ of that area influencing biological activity of the ligand. We compared anti-proliferative activity of three affinity alkylating derivatives of 1,25(OH)₂D₃ containing an alkylating probe at 1,3 and 11 positions. These compounds possessed high-affinity binding for VDR; and affinity labeled VDR-LBD. But, only the analog with probe at 3-position significantly altered growth in keratinocytes, compared with 1,25(OH)₂D₃. Molecular models of these analogs, docked inside VDR-LBD tentatively identified Ser237 (helix-3: 1,25(OH)₂D₃-1-BE), Cys288 (β-hairpin region: 1,25(OH)₂D₃-3-BE,) and Tyr295 (helix-6: 1,25(OH)₂D₃-11-BE,) as amino acids that are potentially modified by these reagents. Therefore, we conclude that the β-hairpin region (modified by 1,25(OH)₂D₃-3-BE) is most important for growth inhibition by 1,25(OH)₂D₃, while helices 3 and 6 are less important for such activity.     

Using F0F1-ATPase motors as micro-mixers accelerates thrombolysis

We have developed a novel micro-mixer using a biological molecular ATP motor. The micro-mixer was constructed from arrays of chromatophore-embedded δ-free F₀F₁-ATPases, where the δ-free F₁ part acted as a rotator to mix solutions, and the F₀ part was driven by light. Confocal microscope studies indicated that the micro-mixer did not touch directly on the fibrin labeled with FITC. The nanomechanical force generated by the motor induced drug movement in the solution and accelerated the fibrinolysis process. All results strongly suggest that the micro-mixers generated a nanomechanical force which accelerated the fibrinolysis process in the presence of lower concentrations of lumbrokinase.     

AgNO3对橡胶树花药愈伤组织形态及体胚发生的影响

橡胶树的花药愈伤组织在长期继代过程中,胚性易下降甚至丧失;而AgNO3作为乙烯活性抑制剂,被广泛应用于植物组织培养中.该研究以继代培养4 a以上的热研7-33-97花药愈伤组织为材料,在继代培养基中添加2.5 mg·L-1 AgNO3预培养35 d后,观察预培养前后愈伤组织表形及其细胞形态的变化,并设计不同浓度AgNO3及不同处理时间对其进行体胚诱导,90 d后分别统计胚状体总数和正常胚数.结果表明:浅黄色质地柔软的愈伤组织在含AgNO3的培养基上预培养后能转变成鲜黄色易碎愈伤组织,在倒置显微镜下前者大多表现为不规则多边形,细胞内含物较稀薄;而后者则呈圆形或椭圆形,细胞内含物丰富,属于典型的胚性细胞.在体胚诱导的第1个月添加5 mg·L-1 AgNO3能显著促进体胚的发生,AgNO3浓度升至10 mg·L-1时体胚发生受到抑制,且畸形胚的形成率显著增加;在含5 mg·L-1 AgNO3的培养基中培养2个月以上,体胚发育明显受阻,大部分形成畸形胚.该研究结果在一定程度上恢复了橡胶树长期继代花药愈伤组织的胚性能力,并提高了其体胚发生频率,为橡胶树花药胚性愈伤组织长期继代培养过程中胚性的保持提供了参考.     

Direct observation of unstained wet biological samples by scanning-electron generation X-ray microscopy

Analytical tools of nanometre-scale resolution are indispensable in the fields of biology, physics and chemistry. One suitable tool, the soft X-ray microscope, provides high spatial resolution of visible light for wet specimens. For biological specimens, X-rays of water-window wavelength between carbon (284 eV; 4.3 nm) and oxygen (540 eV; 2.3 nm) absorption edges provide high-contrast imaging of biological samples in water. Among types of X-ray microscope, the transmission X-ray microscope using a synchrotron radiation source with diffractive zone plates offers the highest spatial resolution, approaching 15-10 nm. However, even higher resolution is required to measure proteins and protein complexes in biological specimens; therefore, a new type of X-ray microscope with higher resolution that uses a simple light source is desirable. Here we report a novel scanning-electron generation X-ray microscope (SGXM) that demonstrates direct imaging of unstained wet biological specimens. We deposited wet yeasts in the space between two silicon nitride (Si₃N₄) films. A scanning electron beam of accelerating voltage 5 keV and current 1.6 nA irradiates the titanium (Ti)-coated Si₃N₄ film, and the soft X-ray signal from it is detected by an X-ray photodiode (PD) placed below the sample. The SGXM can theoretically achieve better than 5 nm resolution. Our method can be utilized easily for various wet biological samples of bacteria, viruses, and protein complexes.     

The phototroph-specific β-hairpin structure of the γ subunit of FoF1-ATP synthase is important for efficient ATP synthesis of cyanobacteria

The F_oF₁ synthase produces ATP from ADP and inorganic phosphate. The γ subunit of F_oF₁ ATP synthase in photosynthetic organisms, which is the rotor subunit of this enzyme, contains a characteristic β-hairpin structure. This structure is formed from an insertion sequence that has been conserved only in phototrophs. Using recombinant subcomplexes, we previously demonstrated that this region plays an essential role in the regulation of ATP hydrolysis activity, thereby functioning in controlling intracellular ATP levels in response to changes in the light environment. However, the role of this region in ATP synthesis has long remained an open question because its analysis requires the preparation of the whole F_oF₁ complex and a transmembrane proton-motive force. In this study, we successfully prepared proteoliposomes containing the entire F_oF₁ ATP synthase from a cyanobacterium, Synechocystis sp. PCC 6803, and measured ATP synthesis/hydrolysis and proton-translocating activities. The relatively simple genetic manipulation of Synechocystis enabled the biochemical investigation of the role of the β-hairpin structure of F_oF₁ ATP synthase and its activities. We further performed physiological analyses of Synechocystis mutant strains lacking the β-hairpin structure, which provided novel insights into the regulatory mechanisms of F_oF₁ ATP synthase in cyanobacteria via the phototroph-specific region of the γ subunit. Our results indicated that this structure critically contributes to ATP synthesis and suppresses ATP hydrolysis.     

Quinone Pathways in Entire Photosynthetic Chromatophores of Rhodospirillum photometricum

In photosynthetic organisms, membrane pigment-protein complexes [light-harvesting complex 1 (LH1) and light-harvesting complex 2 (LH2)] harvest solar energy and convert sunlight into an electrical and redox potential gradient (reaction center) with high efficiency. Recent atomic force microscopy studies have described their organization in native membranes. However, the cytochrome (cyt) bc₁ complex remains unseen, and the important question of how reduction energy can efficiently pass from core complexes (reaction center and LH1) to distant cyt bc₁ via membrane-soluble quinones needs to be addressed. Here, we report atomic force microscopy images of entire chromatophores of Rhodospirillum photometricum. We found that core complexes influence their molecular environment within a critical radius of ∼ 250 Å. Due to the size mismatch with LH2, lipid membrane spaces favorable for quinone diffusion are found within this critical radius around cores. We show that core complexes form a network throughout entire chromatophores, providing potential quinone diffusion pathways that will considerably speed the redox energy transfer to distant cyt bc₁. These long-range quinone pathway networks result from cooperative short-range interactions of cores with their immediate environment.     

The role of activated adenosine receptors in degranulation of human LAD2 mast cells

Mast cell degranulation triggers hypersensitivity reactions at the body–environment interface. Adenosine modulates degranulation, but enhancement and inhibition have both been reported. Which of four adenosine receptors (ARs) mediate modulation, and how, remains uncertain. Also uncertain is whether adenosine reaches mast cell ARs by autocrine ATP release and ecto-enzymatic conversion. Uncertainties partly reflect species and cell heterogeneity, circumvented here by focusing on homogeneous human LAD2 cells. Quantitative PCR detected expression of A_2A, A_2B, and A₃, but not A₁, ARs. Nonselective activation of ARs with increasing NECA monotonically enhanced immunologically or C3a-stimulated degranulation. NECA alone stimulated degranulation slightly. Selective AR antagonists did not affect C3a-stimulated degranulation. NECA''s enhancement of C3a-triggered degranulation was partially inhibited by separate application of each selective antagonist, and abolished by simultaneous addition of antagonists to the three ARs. Only the A_2A antagonist separately inhibited NECA''s enhancement of immunologically stimulated degranulation, which was abolished by simultaneous addition of the three selective antagonists. Immunological or C3a activation did not stimulate ATP release. NECA also enhanced immunologically triggered degranulation of mouse bone marrow derived mast cells (BMMCs), which was partially reduced only by simultaneous addition of the three antagonists or by the nonselective antagonist {"type":"entrez-protein","attrs":{"text":"CGS15943","term_id":"875345334"}}CGS15943. BMMCs also expressed A_2A, A_2B, and A₃ ARs. but not A₁AR detectably. We conclude that (a) A₁AR is unnecessary for LAD2 degranulation or AR enhancement; (b) A_2A, A_2B, and A₃ ARs all contribute to pharmacologic AR enhancement of LAD2 and BMMC degranulation; and (c) LAD2 cells depend on microenvironmental adenosine to trigger AR modulation.     

Design and Synthesis of A3 Adenosine Receptor Ligands, 3′-Fluoro Analogues of Cl-IB-MECA

Abstract

Synthesis of 3′-deoxy-3′-fluoro-N ⁶-substituted adenosines as bioisosteres of Cl-IB-MECA and their binding affinities to A₃ adenosine receptor are described.     

Crystal structure of crotoxin reveals key residues involved in the stability and toxicity of this potent heterodimeric β-neurotoxin

The crystal structure of crotoxin, a potent presynaptic neurotoxin from Crotalus durissusterrificus, was solved at 1.35 Å resolution. It shows the architecture of the three disulfide-linked polypeptide chains (α, β, and γ) of the acidic subunit CA noncovalently complexed with the basic phospholipase A₂ (PLA₂) subunit CB. The unique structural scaffold of the association of the CA and CB subunits indicates that posttranslational cleavage of the pro-CA precursor is a prerequisite for the assembly of the CA-CB complex. These studies provide novel structural insights to explain the role of the CA subunit in the mechanism of action of crotoxin. The crystal structure of the highly toxic and stable CA₂CBb complex crystallized here allows us to identify key amino acid residues responsible for significant differences in the pharmacological activities of the two classes of crotoxin complexes. In particular, we show that critical residues Trp31 and Trp70 of the CBb subunit establish intermolecular polar contacts with Asp99 and Asp89, respectively, of the β-chain of CA₂ and contribute to the stability and toxicity of the CA₂CBb complex. These interactions also lead to decreased PLA₂ activity by partially blocking substrate access to the catalytic dyad and by masking several interfacial binding surface residues important for PLA₂ interaction with phospholipids.Identification of the binding interface between the CA subunits and the CB subunits of crotoxin is important for the structure-based design of antineurotoxic inhibitors. Since crotoxin displays numerous physiological functions, including antitumoral properties, knowledge of its three-dimensional structure will be useful for the understanding of these diverse effects.     

Purification and properties of glycolate oxidase from plants with different photosynthetic pathways: Distinctness of C4 enzyme from that of a C3 species and a C3–C4 intermediate

Glycolate oxidase (GO; EC 1.1.3.1) was purified from the leaves of three plant species:Amaranthus hypochondriacus L.(NAD-ME type C₄ dicot),Pisum sativum L. (C₃ species) andParthenium hysterophorus L. (C₃–C₄. intermediate). A flavin moiety was present in the enzyme from all the three species. The enzyme from the C₄ plant had a low specific activity, exhibited lower K_M for glycolate, and required a lower pH for maximal activity, compared to the C₃ enzyme. The enzyme from the C₄ species oxidized glyoxylate at <10% of the rate with glycolate, while the GO from the C₃ plant oxidized glyoxylate at a rate of about 35 to 40% of that with glycolate. The sensitivity of GO from C₄ plant to -hydroxypyridinemethane sulfonate, 2-hydroxy-3-butynoate and other inhibitors was less than that of the enzyme from C₃ source. The properties of GO fromParthenium hysterophorus, were similar to those of the enzyme fromPisum sativum. The characteristics of glycolate oxidase from leaves of a C₄ plant,Amaranthus hypochondriacus are different from those of the C₃ species or the C₃–C₄ intermediate.     

Magnetization of activated sludge by an external magnetic field

Magnetization of acclimated activated sludge with the application of an external magnetic field was observed using a magnetic force microscope and can be expressed as the visual magnetic flux density graph. FeCl₃ addition up to 0.1% (w/v) into the sludge, which was acclimated with synthetic sewage wastewater, enhanced the magnetization. Such magnetization was also observed in the activated sludge obtained from the practical wastewater treatment plants of a food processing plant and sewage wastewater. FeCl₃ addition also enhanced the sludge magnetization. The possibility is suggested that this magnetization causes the flock to enlarge and enhance sedimentation of the activated sludge on application of an external magnetic field.